K1 tab won't apply update.zip/update.xml files.

I recently purchased a US K1 tab. It came pre-loaded with k1-a301-02-03-110810-us. I was experiencing a few minor issues so I came to this forum and found the officially released OTA images at http://download.lenovo.com/slates/k1/OTA and the instructions for how to apply them.
I began applying the updates in order of release. OTA patches 110829 and 111017 flashed as expected. However now when I try to apply the next update, 111025, upon pressing the power and volume+ buttons the system starts with 111017 and removes the files from the \download folder. I have tried applying this three times. Has the procedure changed beginning with the 111017 release? What am I doing wrong?
The tab works fine with 111017 and has resolved many of my issues, so it's not a huge problem... I would just prefer to be running the latest officially released software.
Thanks in advance for any help.

Why not just grab the latest through OTA? Its automatic.
Thanks,
Ricochet
The K1_Was Just A Broken Promise Lenovo

Similar Messages

I did the update to 3.6.11 - when it restarted it will not open any pages. When i go to check for updates it gives me this error: Update XML file malformed (200) - Any advice?

I did the update to 3.6.11 - After it started Firefox it would go to the requested site in the addressbar, but the page would be blank. I went to check for updates and it told me there was a problem in updating. It gave me this error message: Update XML file malformed (200)
I uninstalled and reinstalled and the same problem exists.
Any advice?

For the error message see [[AUS Update XML File Malformed 200]].
As it appears not to be able to load any sites, a possible cause is your firewall blocking the new version of Firefox. For more details see [[Firefox cannot load websites but other programs can]].

HOw to update XML file residing in DAM by component JSP in run-time?

i have made a component which reads xml file residing in DAM.
Content Author can fill some values in dialog of this component, as soon as author provide the values,i have to update these values in XML file and component reloadsby reading the updated xml file.
i am trying to achieve this by making object of XML file and giving it's path., but i ma unable to access the XML file.
Can anyone help me out to how to update XML file by component JSP in run-time?

Now the changed data must be exported back into the XML file, meaning that the content of certain elements must be updated. How can this be done with XSLT?
XSLT approach: check these online tutorial
http://www.xml.com/pub/a/2000/08/02/xslt/index.html
http://www.xml.com/pub/a/2000/06/07/transforming/index.html
ABAP approach:
for example you have the xml (original) in a string called say xml_out .
data: l_xml type ref to cl_xml_document ,
        node type ref to if_ixml_node .
create object l_xml.
call method l_xml->parse_string
exporting
    stream = xml_out.
node = l_xml->find_node(
    name   = 'IDENTITY'
   ROOT   = ROOT
l_xml->set_attribute(
    name    = 'Name'
    value   = 'Charles'
    node    = node
(the above example reads the element IDENTITY and sets attribute name/value to the same)
like wise you can add new elements starting from IDENTITY using various methods available in class CL_XML_DOCUMENT
so how do I access the XML file in order to update it?
you have already read this XML into a ABAP variable right?
Sorry couldnt understand your whole process, why do you need to read local XML file?
Raja

Applying REGEX-pattern into XML File

I have the following problem:
I have an xml-file. let's say...
<NODE><NODE1 attr1="a1" attr2="a2">
 <NAME> abc</NAME>
 <VERSION> 1.0</VERSION>
</NODE1>
<NODE2 attr1="a3" attr2="a4">
 <NAME> xyz</NAME>
 <VERSION> 3.1</VERSION>
</NODE2></NODE>I need to know "HOW can I get the values of <NAME></NAME> and <VERSION></VERSION> without using DOM.
Since my xml-file is pretty big and DOM will take much Memory, i want to avoid it.
Can anybody suggest some "Regex pattern" so that i can apply it on the xml-file (after converting into String)
Thanks in Advance

That worked perfectly. I assumed ( insert comment here ) that the members of the Properties objects were Strings, and therefore followed the same rules where "\" characters are concerned.
Thank you for pointing out the difference between the two objects, I am not sure how long it would have taken me to figure that out.
Regards,
John Gooch

Updating .xml files through JAVA?

Hi all,
I am Krishna..
I need to basically parse the content of the XML form and do a text replace. The Promotions that are created by the users will also reference images. These references are stored in the XMLforms (which are basically XML files). When the Promotions are being 'submitted' the file path within the XMLForms should be updated with the target location.
Example:
Source Location where Promotion was created:
/myForms/filesystem/Partner Promotion/user1_folder/
Target Location where the Promotion is to be copied:
/myForms/filesystem/Submitted Promotions/user1_folder/
The Promotion XMLForm should be parsed for occurrences of /myForms/filesystem/Partner Promotion/user1_folder/ and replaced
with /myForms/filesystem/Submitted Promotions/user1_folder/
Problem is that, i am unable to build the XML file:
try {
 String rpathString = "/documents/Test/promotions/Contacts.xml";
 com.sapportals.portal.security.usermanagement.IUser user =
 WPUMFactory.getUserFactory().getEP5User(request.getUser());
 IResourceContext ctxt = new ResourceContext(user);
 RID rid = RID.getRID(rpathString);
 IResource resource =
 ResourceFactory.getInstance().getResource(rid, ctxt);
 //read the xml file
 SAXBuilder builder = new SAXBuilder();
 Document doc = builder.build(new File(resource.getName())); //getting exception at this line
 Element root = doc.getRootElement();
 List list = root.getChildren("contact");
 Iterator iter = list.iterator();
 while(iter.hasNext()) {
 Element e = (Element)iter.next();
 String name = e.getChild("name").getText();
 response.write(" name:"+name);
 String address = e.getChild("address").getText();
 response.write(":::address:"+address);
} catch (Exception e) {
 response.write(e.getLocalizedMessage());
 e.printStackTrace();
I have also tried with
new File("http://<server>:50000/irj/go/km/docs/documents/Test/promotions/Contacts.xml");
and
new File(resource.getAccessURI());
.. but i don't get it.
PS: i have added jdom.jar file in the build path
Plz help . .. Thanking you in advance!
Regards,
Krish.

Hi Krish,
The File class doen't apply here.
xmlforms are resources, represented by the class IResource.
I am working with DOM, rather the SAX, but I guess same could work here.
The idea is to get the InputStream of the resource, and use it in the builder:
myResource.getUnfilteredContent().getInputStream().
The writing should then be done by IResource's updateContent.
Usefull javadoc:
http://www.ajvic.es/irj/portalapps/javadocs/km/com/sapportals/wcm/repository/iresource.html
Hope that helps,
Yoav.
EDIT:
Corrected 'setContent' to 'updateContent'

How to update XML file from the program

i am new in abap , and i have the following issue,so plz anyone who knows how to do it
Background :
An XML file is used as the datasource for a Flex Application. From time to time this requires updating with new staff details.
i have already saved the xml file in the c drive with the name C:\AdvAC\AC1\bin-debug\assets\staff
Requirement : Write a Dialog transaction with the following text input fields.
Reference Indicator. (Char10)
Staff No (NUMC, Length 5)
Name (Char50)
Room (Numc, length 3)
Phone (Numc Length 7)
Mail (char30)
in screen 100
The transaction should also have an u201CUpdate Fileu201D button, which when pressed :
1) Loads the file C:\AdvAC\AC1\bin-debug\assets \ into an ITAB.
2) Inserts the data into the ITAB using the following XML format.
<staff>
<ref_ind> Reference Indicator.</ref_ind>
<staff_no> Staff No </staff_no>
<name> Name </name>
<room> Room </room>
<phone> Phone </phone>
<mail> Mail </mail>
</staff>
all should be inside <allstaff> </allstaff> tagsu2026.
Writes the ITAB back to the file.
thanx all

this is what i have done but i dont know how to do the rest. i will apprecite any help from u.
Edited by: man700s on Feb 16, 2010 6:58 AM
REPORT Z_XML_FILE_UPDATE.
TYPES: BEGIN OF ts_staff,
 REF_IND(10) TYPE c,
 Staff_No(5) TYPE c,
 Name(50) TYPE c,
 Room(3) Type n,
 Phone(7) Type n,
 Mail(30) Type c,
 END OF ts_staff.
DATA: t_staff TYPE TABLE OF ts_staff WITH HEADER LINE.
DATA: w_staff Type ts_staff.
DATA T_STRING TYPE TABLE OF STRING.
DATA W_STRING TYPE STRING.
call SCREEN 100.
PERFORM upload_xml_file.
PERFORM update_xml_tab.
*PERFORM download_xml_file.
MODULE USER_COMMAND_0100 INPUT.
W_STRING = '<allstaff>'.
APPEND w_string to t_string.
loop at t_staff into w_staff.
w_string ='<staff>'.
APPEND w_string to t_string.
if T_staff-Ref_Ind = 'X'.
CONCATENATE '<Ref_Ind>' w_staff-Ref_Ind '</Ref_Ind>' into w_string.
APPEND w_string to t_string.
ENDIF.
if T_staff-staff_no = 'X'.
CONCATENATE '<staff_no>' w_staff-staff_no '</staff_no>' into w_string.
APPEND w_string to t_string.
ENDIF.
if T_staff-name = 'X'.
CONCATENATE '<name>' w_staff-name '</name>' into w_string.
APPEND w_string to t_string.
ENDIF.
if T_staff-room = 'X'.
CONCATENATE '<room>' w_staff-room '</room>' into w_string.
APPEND w_string to t_string.
ENDIF.
if T_staff-phone = 'X'.
CONCATENATE '<phone>' w_staff-phone '</phone>' into w_string.
APPEND w_string to t_string.
ENDIF.
if T_staff-mail = 'X'.
CONCATENATE '<mail>' w_staff-mail '</mail>' into w_string.
APPEND w_string to t_string.
ENDIF.
w_string = '</staff>'.
append w_string to t_string.
ENDLOOP.
W_STRING = '</allstaff>'.
APPEND w_string to t_string.
ENDMODULE.
Edited by: man700s on Feb 16, 2010 7:01 AM

How to update xml file

hai ....this is anitha.
iam having some problem regarding the updation of the xml file. i can update the Node Values, its Attributes, its Childnodes etc.. successfully, but only once. first time it is working fine. but when again iam trying to update other nodes, the previously updated values r lost.. iam sending the code also.
pls give the reply asp.
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.NamedNodeMap;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import org.w3c.dom.DOMException;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.FileWriter;
import java.io.IOException;
import java.io.FileInputStream;
import javax.servlet.http.*;
import java.util.ArrayList;
import java.util.Iterator;
//import javax.servlet.http.HttpSession;
public class empXml
 String xmlFilePath="";
 File xmlFile=null;
 FileWriter fout=null;
 Element emp;
 Element empName;
 Element empDesig;
 Element empDiv;
 //Element newNode;
public void createXml(ArrayList arr)throws IOException, DOMException
 try
 for(Iterator itr=arr.iterator();itr.hasNext();)
 System.out.println(itr.next());
 //System.out.println((String)(itr.next()));
 xmlFile=new File("D:\\Tomcat 4.0\\webapps\\news\\jsp\\employee.xml");
 System.out.println(" Employees Information ");
 fout = new FileWriter(xmlFile);
 DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
 DocumentBuilder docBuilder = dbf.newDocumentBuilder();
 Document doc = docBuilder.getDOMImplementation().
 createDocument("", "employee", null);
 Element root = doc.getDocumentElement();
 emp = doc.createElement("emp");
 empName = doc.createElement("empname");
 empName.appendChild(doc.createTextNode(arr.get(0).toString()));
 emp.appendChild(empName);
 empDesig = doc.createElement("empdesig");
 empDesig.appendChild(doc.createTextNode(arr.get(1).toString()));
 emp.appendChild(empDesig);
 empDiv = doc.createElement("empdiv");
 empDiv.appendChild(doc.createTextNode(arr.get(2).toString()));
 emp.appendChild(empDiv);
 root.appendChild(emp);
 DomTreeBuilder.printDomTree(doc,fout); // Builds The Dom Tree
 System.out.println("Employees XML File is Successfully Generated");
 }catch (Exception e)
 System.err.println("Error while Generating file"+ e.getMessage());
 finally
 fout.close();
}//end of createXml
}//end of class createNewsXml
class DomTreeBuilder
public static void printDomTree(Node node,FileWriter fout) throws IOException
 int type = node.getNodeType();
 switch (type)
 // print the document element
 case Node.DOCUMENT_NODE:
 fout.write("<?xml version=\"1.0\" encoding=\"ISO-8859-1\"?>");
 printDomTree(((Document)node).getDocumentElement(),fout);
 break;
 // print element and any attributes
 case Node.ELEMENT_NODE:
 fout.write("<");
 fout.write(node.getNodeName());
 if (node.hasAttributes())
 NamedNodeMap attrs = node.getAttributes();
 for (int i = 0; i < attrs.getLength(); i++)
 printDomTree(attrs.item(i),fout);
 fout.write(">");
 if (node.hasChildNodes())
 NodeList children = node.getChildNodes();
 for (int i = 0; i < children.getLength(); i++)
 printDomTree(children.item(i),fout);
 break;
 // Print attribute nodes
 case Node.ATTRIBUTE_NODE:
 fout.write(" " + node.getNodeName() + "=\"");
 fout.write(node.getNodeValue());
 if (node.hasChildNodes())
 NodeList children = node.getChildNodes();
 for (int i = 0; i < children.getLength(); i++)
 printDomTree(children.item(i),fout);
 fout.write("\"");
 break;
 // handle entity reference nodes
 case Node.ENTITY_REFERENCE_NODE:
 fout.write("&");
 fout.write(node.getNodeName());
 fout.write(";");
 break;
 // print cdata sections
 case Node.CDATA_SECTION_NODE:
 fout.write("<![CDATA[");
 fout.write(node.getNodeValue());
 fout.write("]]>");
 break;
 // print text
 case Node.TEXT_NODE:
 fout.write(node.getNodeValue());
 break;
 // print comment
 case Node.COMMENT_NODE:
 fout.write("");
 break;
 // print processing instruction
 case Node.PROCESSING_INSTRUCTION_NODE:
 fout.write("<?");
 fout.write(node.getNodeName());
 String data = node.getNodeValue();
 fout.write(" ");
 fout.write(data);
 fout.write("?>");
 break;
 } // end of Switch
 if (type == Node.ELEMENT_NODE)
 fout.write("</");
 fout.write(node.getNodeName());
 fout.write('>');
} // printDomTree(Node)
} // End of DomBuilder Class
waiting for the reply soon.
thanks and regards,
anitha

Hi,
There was no problem in this code. When I executed it worked well, anyway I changed slightly because to add more than one elements. I posted the entire code here:
Regards
Baskar
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import org.w3c.dom.Document;
import org.w3c.dom.Element;
import org.w3c.dom.NamedNodeMap;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import org.w3c.dom.DOMException;
import java.io.File;
import java.io.FileWriter;
import java.io.IOException;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.StringTokenizer;
public class empXml {
 String xmlFilePath = "";
 File xmlFile = null;
 FileWriter fout = null;
 Element emp;
 Element empName;
 Element empDesig;
 Element empDiv;
 // Element newNode;
 public static void main(String[] args) {
 try {
 empXml x = new empXml();
 ArrayList ar = new ArrayList();
 ar.add("baskar,SE,Hitachi");
 ar.add("krish,SE,Hitachi");
 ar.add("preet,SE,Hitachi");
 ar.add("Jan,SE,Hitachi");
 ar.add("Sam,SE,Hitachi");
 x.createXml(ar);
 } catch (Exception e) {
 e.printStackTrace();
 public void createXml(ArrayList arr) throws IOException, DOMException {
 String empl[] = new String[arr.size()];
 arr.toArray(empl);
 try {
 Iterator itr = arr.iterator();
 xmlFile = new File("employee.xml");
 System.out.println(" Employees Information ");
 fout = new FileWriter(xmlFile);
 DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance();
 DocumentBuilder docBuilder = dbf.newDocumentBuilder();
 Document doc = docBuilder.getDOMImplementation().createDocument("",
 "employee", null);
 Element root = doc.getDocumentElement();
 for (int i = 0; i < empl.length; i++) {
 StringTokenizer st = new StringTokenizer(empl, ",");
 emp = doc.createElement("emp");
 empName = doc.createElement("empname");
 empName.appendChild(doc.createTextNode(st.nextToken()));
 emp.appendChild(empName);
 empDesig = doc.createElement("empdesig");
 empDesig.appendChild(doc.createTextNode(st.nextToken()));
 emp.appendChild(empDesig);
 empDiv = doc.createElement("empdiv");
 empDiv.appendChild(doc.createTextNode(st.nextToken()));
 emp.appendChild(empDiv);
 root.appendChild(emp);
 DomTreeBuilder.printDomTree(doc, fout); // Builds The Dom Tree
 System.out.println("Employees XML File is Successfully Generated");
 } catch (Exception e) {
 e.printStackTrace();
 } finally {
 fout.close();
 }// end of createXml
}// end of class createNewsXml
class DomTreeBuilder {
 public static void printDomTree(Node node, FileWriter fout)
 throws IOException {
 int type = node.getNodeType();
 switch (type) {
 // print the document element
 case Node.DOCUMENT_NODE: {
 fout.write("<?xml version=\"1.0\" encoding=\"ISO-8859-1\"?>");
 printDomTree(((Document) node).getDocumentElement(), fout);
 break;
 // print element and any attributes
 case Node.ELEMENT_NODE: {
 fout.write("<");
 fout.write(node.getNodeName());
 if (node.hasAttributes()) {
 NamedNodeMap attrs = node.getAttributes();
 for (int i = 0; i < attrs.getLength(); i++)
 printDomTree(attrs.item(i), fout);
 fout.write(">");
 if (node.hasChildNodes()) {
 NodeList children = node.getChildNodes();
 for (int i = 0; i < children.getLength(); i++)
 printDomTree(children.item(i), fout);
 break;
 // Print attribute nodes
 case Node.ATTRIBUTE_NODE: {
 fout.write(" " + node.getNodeName() + "=\"");
 fout.write(node.getNodeValue());
 if (node.hasChildNodes()) {
 NodeList children = node.getChildNodes();
 for (int i = 0; i < children.getLength(); i++)
 printDomTree(children.item(i), fout);
 fout.write("\"");
 break;
 // handle entity reference nodes
 case Node.ENTITY_REFERENCE_NODE: {
 fout.write("&");
 fout.write(node.getNodeName());
 fout.write(";");
 break;
 // print cdata sections
 case Node.CDATA_SECTION_NODE: {
 fout.write("<![CDATA[");
 fout.write(node.getNodeValue());
 fout.write("]]>");
 break;
 // print text
 case Node.TEXT_NODE: {
 fout.write(node.getNodeValue());
 break;
 // print comment
 case Node.COMMENT_NODE: {
 fout.write("");
 break;
 // print processing instruction
 case Node.PROCESSING_INSTRUCTION_NODE: {
 fout.write("<?");
 fout.write(node.getNodeName());
 String data = node.getNodeValue();
 fout.write(" ");
 fout.write(data);
 fout.write("?>");
 break;
 } // end of Switch
 if (type == Node.ELEMENT_NODE) {
 fout.write("</");
 fout.write(node.getNodeName());
 fout.write('>');
 } // printDomTree(Node)
} // End of DomBuilder Class

How to update XML file using XSLT

Hi there,
I have a "small" issue with exporting data to an XML file using XSLT.
A two steps process is needed to import data from a non-hierarchical XML file into ABAP, change the data, and then update the XML file with new values. The problem is not trivial, since the format of the XML file is a complex one: there are many interdependent elements on the same level, pointing to each other by using id and ref attributes. Based on these values the data can be read and written into an internal table. I use XSLT and XPath for that. So the inbound process is done and seems to work correctly. I have to mention that the file contains much more data than I need. I am working only with a small part of it.
Now the changed data must be exported back into the XML file, meaning that the content of certain elements must be updated. How can this be done with XSLT? I can pass only the internal table to the transformation, so how do I access the XML file in order to update it? I have tried to use the xsl:document() function to access the content of the file store locally on my PC, but it fails each time by throwing and URI exception. I have tried the absolute path without any addition and the path with the file:/// addition. Same result. Please advise.
Many thanks,
Ferenc
P.S. Please provide me with links only if they are relevant for this very matter. I will not give points for irrelevant postings...

Now the changed data must be exported back into the XML file, meaning that the content of certain elements must be updated. How can this be done with XSLT?
XSLT approach: check these online tutorial
http://www.xml.com/pub/a/2000/08/02/xslt/index.html
http://www.xml.com/pub/a/2000/06/07/transforming/index.html
ABAP approach:
for example you have the xml (original) in a string called say xml_out .
data: l_xml type ref to cl_xml_document ,
 node type ref to if_ixml_node .
create object l_xml.
call method l_xml->parse_string
exporting
 stream = xml_out.
node = l_xml->find_node(
 name = 'IDENTITY'
 ROOT = ROOT
l_xml->set_attribute(
 name = 'Name'
 value = 'Charles'
 node = node
(the above example reads the element IDENTITY and sets attribute name/value to the same)
like wise you can add new elements starting from IDENTITY using various methods available in class CL_XML_DOCUMENT
so how do I access the XML file in order to update it?
you have already read this XML into a ABAP variable right?
Sorry couldnt understand your whole process, why do you need to read local XML file?
Raja

How to update XML file through UCCX script ?

Hi,
I have an UCCX script with MENU step. One of the step is for technical support team. When caller chose this step, information about date and time of the call and calling number should be recorded on a XML file located on the web server.
This XML is uploaded into the web server , but I don't know how to update it through UCCX script.
Here is how the XML file looks like:
<?xml version="1.0" ?>
<rss version="2.0">
<channel>
<title>CALL LOG</title>
<link></link>
<description>Support Call log</description>
<ttl>1</ttl>
<item>
<title>2011-08-24 14:56:39 - 00044 123 123 123</title>
<link></link>
<description></description>
</item
</channel>
</rss>
Any idea?
Thanks,
O

Hi
The 'keyword transform' step uses the template XML file to generate the actual XML file you want to post... the template would be a plain text file uploaded to the repository, and would look like so:
<?xml version="1.0" ?>
CALL LOG
Support Call log
1
%%calldatetime%% - %%clinumber%%
Now - if you had that bit of XML, with correct time/number in it - have you verified know that you can definately just post that XML to a certain URL to get it on the server? Check with whoever manages that server exactly what you need to do to get it to appear - then worry about how you do that from UCCX. It may not be a matter of posting up that XML, you may need it in a different format or something..
Aaron

How to Read,Write & Update XML File

hi,
How to read,create and update an XML file using DOM

xml API's are there like jdom and stuffs...
search in google : xml API's + java

Update XML files with Flash

Hi,
I would like to know if its possible to insert or update
existing data of a XML file with flash?
And how can I do it?

This code have two procedures or functions the createXML is
called first this one asks for the variable send using get called
fileName (Append this variable to the page request). The function
called writeToFile opens the file and writes to it.
Form flash you need to create the xmlfile and call the
sendAndLoad method.

Update XML files with a PHP form...

Hi,
I would like to know if its possible to update or insert data
to XML files from a PHP form? And how can I do it? Basically i want
to create a backoffice for my XML Flash slide show.
Can anyone help me?

Indirectly, I suppose. In that you'd have to handcode
verything. There's
nothing built-in to DW to accomplish this task. The simplest
way of doing it
is to use the FSO to write out the XML to an XML file.
Jules
http://www.charon.co.uk/charoncart
Charon Cart 3
Shopping Cart Extension for Dreamweaver MX/MX 2004

Update XML files with HTML forms...

Hi,
I would like to know if its possible to update or insert data
to XML files from a HTML form? And how can I do it?
Does dreamweaver have any extension that does this?

hi bregent!
im using php.
i have a xml flash slide show script, and i want to insert
this slide show on a site. No problem here, but i would like to
create a backoffice were i can update or insert the pictures of the
xml slide show.
can you help me on this?

Writing and updating XML file on client side

Hello,
I'm looking for a simple example which permit to write and
update a xml file on the client side.
Someone can help me, please?

meghashyamgr ,
Because of security reasons a swf running in a browser cannot
read or write xml files to a user's computer. What can be done,
however, is write xml to what is known as a SharedObject.
SharedObjects act as cookies for Flashplayer.
If you would like an example of this I'd be more than happy
to show you...

Updating XML file

Hi all,
I have this idea of running a program that accepts user's input and replacing some parameters in the xml file.
For e.g.
The XML file have this tag
<database username=@username@ password=@password@>
The program would get the user's input and replace those placeholder appropriately.
Which java library can i make use to achieve this?
Appreciate any help

i think u should use XMLParser (JDOM) or another parser. with XMLParser (JDOM), it's so easy to insert or update any value of attribute.
with JDOM you just call "database" tag and then set attribute for "username,password" with anykind of value.

K1 tab won't apply update.zip/update.xml files.

Similar Messages

Maybe you are looking for