KANBAN - STO (error : Goods movement not possible with mvmt type 351)
Hi,
I have configured KANBAN STO in the system which is working fine.
I am able to empty the bin and create STO (purchase orders)
But when I select a bin and try to make it full, system gives error message:
"Goods movement not possible with mvmt type 351"
In KANBAN STO replenishment strategy, I have used movement type 101,
I m little confused from where this 351 movement type is coming from.
Please help resolvethis issue.
Pavan
Hi,
Below is the entire message:
Goods movement not possible with mvmt type 351
Message no. M7096
Diagnosis
You have entered a movement type that has not been defined for this transaction/event.
Procedure
Choose another movement type.
You can choose the movement type as follows:
If you know the movement type, enter it directly in the Movement type field.
Choose the movement type via the menu option Movement type.
Choose the required movement type from the possible entries.
If you do not find a suitable movement type, exit this function and choose a different goods movement from the Inventory Management menu.
Pavan
Similar Messages
-
Goods movement not possible with mvmt type 991
Hi,
As per requirement I need to create a GR for Purchase order wise. I tried to create using BAPI BAPI_GOODSMVT_CREATE but It returns the error message.
error: Goods movement not possible with mvmt type 991
LOOP AT gt_outtab1.
gt_outtab1-gr_wght = gt_outtab1-gr_wght.
MOVE: gt_outtab1-matnr TO gt_item-material,
gt_zseed_po_qty-werks TO gt_item-plant,
gt_zseed_po_qty-lgort TO gt_item-stge_loc,
'901' TO gt_item-move_type,
gt_outtab1-gr_wght TO gt_item-entry_qnt,
'B' TO gt_item-mvt_ind,
'1' TO gt_item-stck_type,
v_lifnr TO gt_item-vendor,
gt_outtab1-ebeln TO gt_item-po_number,
gt_outtab1-ebelp TO gt_item-po_item.
APPEND gt_item.
ENDLOOP.
CLEAR gt_item.
LOOP AT gt_outtab3 WHERE bqty IS NOT INITIAL.
MOVE: gt_outtab3-bmatnr TO gt_item-material,
gt_zseed_po_qty-werks TO gt_item-plant,
gt_zseed_po_qty-lgort TO gt_item-stge_loc,
'991' TO gt_item-move_type,
gt_outtab3-bqty TO gt_item-entry_qnt,
'' TO gt_item-mvt_ind,
'1' TO gt_item-stck_type,
v_lifnr TO gt_item-vendor.
APPEND gt_item.
ENDLOOP.
CLEAR gt_item.
LOOP AT gt_outtab3 WHERE pqty IS NOT INITIAL.
MOVE: gt_outtab3-bmatnr TO gt_item-material,
gt_zseed_po_qty-werks TO gt_item-plant,
gt_zseed_po_qty-lgort TO gt_item-stge_loc,
'942' TO gt_item-move_type,
gt_outtab3-pqty TO gt_item-entry_qnt,
'' TO gt_item-mvt_ind,
'1' TO gt_item-stck_type,
v_lifnr TO gt_item-vendor.
APPEND gt_item.
ENDLOOP.
***********Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = gs_header
goodsmvt_code = gs_code
IMPORTING
goodsmvt_headret = gs_headret
materialdocument = gs_retmtd
matdocumentyear = gs_year
TABLES
goodsmvt_item = gt_item
return = gt_return.
so could you please let me know which are the parameters I need to pass to create GR?
regards,
tarunHi,
Go to T.code OMJJ . Give your your movement type 991. Check the allowed transaction and all the details in your left hand side and the settings done.
Thanks
Arbind -
Goods movement not possible with mvmt type 561-error
Dear All,
I am using bapi BAPI_GOODSMVT_CREATE for goods movement. i am gettining Goods movement not possible with mvmt type 561 error.
please suggest me. i am using serial number also.
regards,
satishGetting errors while using PI_GOODSMVT_CREATE' with 561+K
-
Goods movement not possible with mvmt type 961
hi all,
i got a error as Goods movement not possible with mvmt type 961
Can any body help me to know whether i can create GR for mvmt type 961.
mvmt type 961 is for third party transferGetting errors while using PI_GOODSMVT_CREATE' with 561+K
-
'Goods movement not possible with mvmt type 102'
Dear Experts,
I have to reverse the GR and I am using BAPI -> BAPI_GOODSMVT_CREATE and passing below information but I am getting error message as 'Goods movement not possible with mvmt type 102'. Could any one please tell me what would be the possible reasons to get this error and how can I fix this.
goodsmvt_header-PSTNG_DATE = 20110705
goodsmvt_header-DOC_DATE = 20110705
goodsmvt_code-GM_CODE = 06
goodsmvt_item-PLANT = 1400
goodsmvt_item-MOVE_TYPE = 102 <<< Reversal movement type
goodsmvt_item-ENTRY_QNT = 02
goodsmvt_item-ENTRY_UOM = SET
goodsmvt_item-PO_NUMBER = W299999508
goodsmvt_item-PO_ITEM = 0010
goodsmvt_item-MVT_IND = B
goodsmvt_item-XSTOB = ''. << space to use reversal types
Thanks in Advance
VenkatHi Please provide Material Document, Document Year and Posting date as shown below
MATDOCUMENTYEAR = DOC_YEAR.
GOODSMVT_PSTNG_DATE = POSTING_DATE.
MATERIALDOCUMENT = MAT_DOC
CALL FUNCTION 'BAPI_GOODSMVT_CANCEL'
EXPORTING
MATERIALDOCUMENT = MATERIALDOCUMENT
MATDOCUMENTYEAR = MATDOCUMENTYEAR
GOODSMVT_PSTNG_DATE = GOODSMVT_PSTNG_DATE
GOODSMVT_PR_UNAME =
IMPORTING
GOODSMVT_HEADRET = WA_GOODSMVT_HEADRET
TABLES
RETURN = IT_RETURN
GOODSMVT_MATDOCITEM =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'. -
Cannot cancel a GR: Goods movement not possible with mvmt type 502
Hi,
I was trying to cancel a goods receipt for an inbound delivery. However I ran into trouble with the following error message.
Goods movement not possible with mvmt type 502 .
Is there some configuration that I would be needed to make before I can cancel a goods receipt?
Thanks,
ArupTo expand on the above some,
check the mvmnt type used for the origanal GR and use the coresponding reversal mvnmt type.
or confirm for us that the origanal receipt was in fact a 501??
Edit: or use migo to cancel the GR doc.
cancelation > material doc
this will only be possible if the stock is still available (same status as well) -
Goods movement not possible with mvmt type 109
Hello All!
I have following problem. I try to book the goods receipt with VL32n and movement type 109 and get following message: M7096 Goods movement not possible with mvmt type 109
- First I created a PO with Confirmation Control Key Inbound delivery
- Goods receipt ist booked with movement type 107 with MIGO
- I created an inbound delivery with movement type 109
Finally I want to book with VL32n the goods receipt, but the booking fails with error message 109. Any idea why.
Regarding some OSS notes, I thought that it could work this way.
Hoping for help,
Barbarai am not sure that i read you correctly
the process for inbound delivery is
create PO; in PO conf control key set to inbound del.
create inbound del in vl31n
do MIGO on inbound del
if the inbound del is with 107 mvmt type the GR will bring it to valuated block stock
do 109 to move it from valuated block stock to unresticted stock. -
Fleet Equipment-IFCU-Goods movement not possible with mvmt type 201
Hi Experts,
When I am trying to post the movement of consumed Fuel & Distance by IFCU,the error comes 'Goods movement not possible with mvmt type 201'.
Goods movement not possible with mvmt type 201
Message no. M7096
Diagnosis
You have entered a movement type that has not been defined for this transaction/event.
Procedure
Choose another movement type.
You can choose the movement type as follows:
If you know the movement type, enter it directly in the Movement type field.
Choose the movement type via the menu option Movement type.
Choose the required movement type from the possible entries.
If you do not find a suitable movement type, exit this function and choose a different goods movement from the Inventory Management menu.
I cheked some of old post but not solved.I have also maintained IFCU in OMJJ for allowed transaction for 201 & 202 movement type but still not working.
Please suggest me.Hi Maheswaran,
Thanks for your reply.I have already configured,maintained the values and setting.
Please check and update if any other solution.
Regards,
Baiju -
Goods movement not possible with mvmt type 966 .
Hi guys....'
i use BAPI_GOODSMVT_CREATE to do goods receive without PO into unrestricted use...
these are the parameters
HEADER:
PSTNG_DATE: 30.09.2004
DOC_DATE: 30.09.2004
HEADER4_TXT: XXXXXX
GOODSMVT_CODE: 03
GOODSMVT_ITEM:
MATERIAL: XXXXXX
PLAN: 8000
STGE: 80FG
BATCH: AQ305
MOV: 966
ENTRY_QNT: 1
ENT_UOM: EA
ENT_UOM_ISO: EA
ITEM_TXT: XXXXXX
GR_RCPT: XXXX
COSTCENTER: 22000
the rest... empty....
Thank you for your help....
How to find out GOODSMVT_CODE relationship with the good movement ?
Message was edited by: Kokwei WongYou can find the relation of GM_CODE and Transaction in table 'T158G'.
And you can see the further information about this function in BAPI Explorer -> Select your method -> Select tab 'Documentation'.
Cheers,
Thitima -
Idoc mbgmcr02 movement type 311 .. goods movement not possible w/mvmt type
i am using we19 to create a test idoc...i have the ports and partners filled in...i am using movement type 311..i have the material , the plant, the storage location...the qty..i have the move material, the move plant and move storage location filled in...
when i use standard inbound processing it generates the idoc..i go to we02 and look at the idoc..in the status records i get status 51 goods movement not possible with mvmt type 311..????what am i missing
if i do the exact same thing with the transaction migo...works fine...
am i missing something????i am trying to move material from one location to another using IDOC MBGMCR02..
I am entering the following...
E1BP2017_GM_Code=04
in e1BP2017_GM_ITEM_Create
Material=CON2020
Plant=3000
Stg_Loc=0001
Move_Type=311
Entry Qty=001
Move_Mat=Con2020
Move_Plant=3000
Move_Stloc=0002
Mvt_Ind=??????
In the Mvt_Ind I have tried E,K,M,Q
the in get a status 51 Update Control of Movement Type is incorrect(entry311XX_K)....
Is E1BP2017_GM_CODE = 4 correct???
What should be the Mvt_Ind??? -
Goods movement not possible with movement type 702
Hi experts,
I have created a new movement type 702 (a copy of 602) for return delivery from customer.
When I create delivery I did not face any issue. However while doing post goods issue, I get error
"Goods Movement not possible with mvmt type 702."
Is there any configuration missing for post goods issue?
Please advise.
Thanks,
PriDEAR,
AFTER CHECKING IN "OMJJ" ...SEE WHETHER YOU HAVE NOT BLOCKED THIS MOVEMENT...
ALSO SEE IN OPTION WHETHER ALL TRANSACTIONS HAVE BEEN ENTERED LIKE
"MI01"
"MI02"
"MI31"
"MI07"
"MI37"
WE ARE PERFOMING THIS ACTIVITY USUALY SO PLZ PERFORM IT,,WE ACTUALLY BLOCK THIS MOVT TYPE AFTER ARE PHYSICAL INVENTORY...
OR EVEN IF THESE DOESNT WORK..
GO TO "SU01" IN WHICH PUT THE USER ID AND CHECK IN AUTHORISATION WHICH PROFILE IS ASSIGNED TO IT..
REGARDS
REWA -
HI MM Folks,
My requirement is reservation should be created with 311 movt type. When we do good issue with 201 movt type with reference to reservation
system is throwing an error "Goods movement not possible with mvmt type 311". Due to MRP run we should create a reservation using 311 movement type but not 201 mvt type, (If we create a reservation 201 movt type, during MRP run automatically reservation quantity also taking into consideration, to avoid this we will be creating reservation as 311 movt type). Is there any enhancement to available to reach the requirement. If it is possible give me guidelines.
your help will be highly appreciable.
Regards
VinayDear,
Movement type 311 is for doing transfer posting from storage location to storage location with single step.But Movement Type 201 is to have consumption entry with respect to cost center etc...
You are creating a reservation using 311 movement type and while posting the entry you are selecting the"Executable action in MIGO" is "A08-Transfer Posting" so system will always use the movement type used at the time of reservation only.Here you can not change.
And more over if you process entry with 201 movement type system creates accounting documents but with movement type 311 system will not create accounting documents.
Regards,
Pardhu -
"Goods Movement type not possiable with mvmt type 261"
Dear All,
I am doing 541 movement with Service order combination, i have found following error,
"Goods Movement type not possiable with mvmt type 261"
Can you help me for this error.
-Reards,
SunilGetting errors while using PI_GOODSMVT_CREATE' with 561+K
-
Inspection lot, goods movements not possible!
Hello dear SAP Gurus and friends,
I am trying to do a stock transfer from Quality to Unrestricted in QA32, but SAP shows error "Please fill delivery note!".
I have checked the Purchase Order and Delivery Note is filled!
Can you please help?
Thanks in advance,
Adelmo SilvaHello,
I can explain the process better:
I receive the material from a Purchase Order into my warehouse, mov. type 101. Then the material as quality inspection on goods receipt activated, inspection lot is created and material stays in quality status on stok.
After that, is time to do the results recording and usage decision. When usage decision is done with OK, I have to move the stock from status Quality to Unrestricted, correct? Here, SAP shows an error that I have to fill the Delivery Note!
I checked the PO and the Material Movement that is in the Inspection Lot, and Delivery Note is filled! I have made debug on system and bypass the message. Material is now in Unrestricted. I just wanted to know what was the cause of this?
Thanks and best regards,
Adelmo -
Goods receipt not possible for delivery 540039784: error code 4
Dear Friends,
While making GR against out bound delivery for a STO system throws following error:
Goods receipt not possible for delivery 540039784: error code 4
Message no. M7865
Kindly help me out.
AshokHi
This Error indicates There are No Delivery items.
Check the delivery and its document flow.
Check the GR Refernce document being used for MIGO
Regards
Anand
Maybe you are looking for
-
Can't get PowerBook G4 Titanium 800 MHz to run Leopard 10.5?
I recently bought a PowerBook G4 Titanium 800 MHz A1001 model and I want to install Leopard (10.5) on it. I have tried both of the "faking out the leopard installation" http://lowendmac.com/osx/leopard/openfirmware.html but it doesn't want to work fo
-
Hi, I am currently using a program called JPadPro for my java source codes. I am just beginning to learn java and I have just started on Java Swing GUI codings. My problem is that the program compiles, but it doesn't run. It always give me an error s
-
Labels in pie charts overlap when the slice is very thin
Hi, I have Crystal Reports 2008 and I am using it to create some dynamic charts but in some cases (when the slice of the pie is really thin) the labels of the pie slices overlap. It is a customer's requirement to have labels (legends) on each slice a
-
Any help on this Message (Yellow) while installing BW Statistics?
Hi, Following the link: http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/content.htm to install BI Statistics (0BWTCT_STA). In rsa1, Bi Content, InfoArea, I collected 0BWTCT_STA to the right pane, and followed the Proced
-
Hi, I have 3 tables t1, t2, t3. t1 is the master of t2. t2 is the master of t3. Data in t1: seq name 1 m 2 g Date in t2 seq t1_seq name 1 1 mani 2 1 julia 3 2 kali 4 2