Key press sound

Why in ringtones + sounds the option of key press is given in Nokia lumia 710, I always keep tick on the key press but it never makes a sound when I press a key. Is there any problem with the phone or it is by default didn't make any sound when we press key.
Any advice will be helpful.

Key press sound works when the onscreen keypad is active not all around the menu. My Lumis 710 exhibits same behaviour, your phone is normal.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Similar Messages

Ringer sound and key-press sounds stopped.

My ringer and key clicks suddenly stopped working but music and alarms still work. Vibration works. Checked all sound settings and they are set up correctly per my preferences. I tried a reboot. Have not yet tried a master reset. What can I do?

The sound for keyboard press is effected by the volume adjustment for notifications, if you adjust volume and turn volume down this will effect the volume for key press. Uncheck the option under Settings > Sounds> Phone Ringtone that says "Use incoming call volume for notificarion" this way the notification volume will not be affected if you adjust volume on device.

Sound on Key Press when Texting

I have the Sound on Key Press turned On (under Language & Keyboard > Multi Touch keyboard > Sound on Keypress) so when I type on the keyboard, I get the clicks.
I have noticed when I am sending a text message sometimes the clicks get softer in sound (less volume) then back to normal volume. I have turned the phone off/on at least twice and removed/reinstalled the battery and it still happens.
Any assistance would be apprecaited.

The sound for keyboard press is effected by the volume adjustment for notifications, if you adjust volume and turn volume down this will effect the volume for key press. Uncheck the option under Settings > Sounds> Phone Ringtone that says "Use incoming call volume for notificarion" this way the notification volume will not be affected if you adjust volume on device.

Using InputMap and ActionMap to detect any key pressed...plz help

Hi,
I am quite new to Java. I have a tiny problem. I wanna put an actionlistener into a JTextField, so it printout something whenever a key is pressed (when the textField is selected).
I can only get it to print if I assign a specific key to pressed...example below (works):
JTextField searchBox = new JTextField();
InputMap imap = searchBox.getInputMap();
ActionMap amap = searchBox.getActionMap();
imap.put(KeyStroke.getKeyStroke(KeyEvent.VK_A, 0), "pressed");
amap.put("pressed", new AbstractAction() {
          public void actionPerformed(ActionEvent e) {
               System.out.println("TYPEEEEEEEEEEEEEEE");
HOWEVER, when i change keystroke to any key pressed, it doesn't work. Example below(doesn't work):
JTextField searchBox = new JTextField();
InputMap imap = searchBox.getInputMap();
ActionMap amap = searchBox.getActionMap();
imap.put(KeyStroke.getKeyStroke(KeyEvent.KEY_PRESSED, 0), "pressed");
amap.put("pressed", new AbstractAction() {
          public void actionPerformed(ActionEvent e) {
               System.out.println("TYPEEEEEEEEEEEEEEE");
Somebody plz helps me. I am really confused how to use KeyEvent.KEY_PRESSED. I thought it would work the same way as KeyEvent.VK_A...if i can't use KEY_PRESSED for that purpose, what KeyEvent do I use?
Thank you very much in advance.

Sounds like you want a KeyListener.
textField.addKeyListener(new KeyListener() {
    public void keyTyped(KeyEvent e) {
        System.out.println("Key typed.");
    public void keyPressed(KeyEvent e) {
        System.out.println("Key pressed.");
    public void keyReleased(KeyEvent e) {
        System.out.println("Key released.");
});See the API documentation for more information.

Raise Key pressed event

Hello, any know how can I raise a key press event throw code. For example I want to simulate that the user has press the A Key. How can I do that throw code?
Thanks a lot !!

Hi there,
Your question has been discussed previously in the forums. Sounds like you want to programmatically click a button in WPF.
Please check out this post
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1329603&SiteID=1
Thanks,
Jennifer

Key press tone

Nokia I want to know how to start sound when I touch a each n every single click. I already did key press action but its working only in keypad n dialer. When I bought this mobile that Time its working but after that I didn't remember what I did in setting. Now its not make any sound on touch. So plz give me a solution.

Hi there, mayurpanchal. You may turn on the "Key press" tone by going under Settings> ringtones+sounds> Key press. We will wait for your response about the outcome of the steps we have provided.

Backlight key presses not detected, OPTIMUS, wiki didn't help

I am using a Razer Blade 14" with linux-ck kernel (although I have tested in the main kernel and the issue remains).
The keyboard brightness settings keys are not detected by X at all (using xev reports no keycodes when I press them).
However, the driver is getting that information. And in the same type as other function keys (such as sound up/down - which are detected correctly).
I know this because, while investigating the workings of the touchpad, I ran the razer-test script found in:
http://fxchip.net/RazerBlade/
(slightly modified because the device ID is 0x011D in the 14").
It distinguishes normal key presses from Macro Keys. Function keys in this laptop are macro keys. When pressing volume down, I get the following report:
Macro keys: Razer Extra Buttons:
Extra key: FN
04 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Macro keys: 02 ea 00 00
Macro keys: 02 00 00 00
Macro keys: Razer Extra Buttons:
04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
When pressing brightness up/down, I get the following report:
04 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Macro keys: 02 70 00 00
Macro keys: 02 00 00 00
Macro keys: 02 6f 00 00
Macro keys: 02 00 00 00
Macro keys: Razer Extra Buttons:
04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
(note that the last part just signals that I let go of the FN key)
My idea was to try to find the keycodes through xev and then map them manually. However, this was unsuccessful since xev reports no input when I press brightness up/down (while volume up/down works).
This is where I'm lost - the keyboard drivers seems to just be ignoring them.
Any help appreciated . Let me know what I can post if it's of any help!
Cheers,
Rodrigo
EDIT:
My laptop uses optimus hardware, and I'm using the integrated Intel Graphics card.
I have tried all the methods in the wiki but none of them worked:
https://wiki.archlinux.org/index.php/backlight#Overview
https://wiki.archlinux.org/index.php/In … ter_resume.
It's also worth noting that I do have control over the backlight with software - the FN+F8/F9 key bindings are the ones that are just completely ignored by the driver.
Last edited by rgomes (2013-11-22 18:47:57)

maxo wrote:
Hey. If you aren't using the nvidia graphics card then this works on mine.
Edit the /etc/X11/xorg.conf.d/20-intel.conf by adding
Option "Backlight" "intel_backlight"
Xorg normally automatically selects the backlight device. On mine it ued acpi_video0 instead of intel_backlight.
Hope that helps!
Thanks, but the challenge is, to get nvidia prop. drivers working.
I think, I tracked the problem down to some backlight issue, probably a firmware issue with the laptop model.
On ubunutu, ideapad backlight modules gets loaded, on arch, it uses the intel-bl. As it stands to reason, backlight settings are too dim when starting X.
I am about to test nvidia-bl from AUR.

Detecting Key Press at App Startup

I would like to detect a press of the Shift key (ideally) when my application starts.
If the user is pressing the key, display a normally hidden dialog allowing the user to select the language to use. If the key is not pressed, continue starting the application in the default language.
From the Java Tutorial, it seems I can only detect a key press if the focus in on a GUI element is already visible. This defeats the purpose of having the special dialog be hidden.
Any suggestions?

From the Java Tutorial, it seems I can only detect a
key press if the focus in on a GUI element is already
visible. This defeats the purpose of having the
special dialog be hidden.I believe this is because you are 'listening' for a key press from your GUI class
Any suggestions?Sounds like you need to Listen for a key press in your running code
you could try to give the GUI focus while still having it hidden(don't know if that would work)AND Make sure that you have your GUI and main APP in seperate threads. This would, of course, require a pause in your main app to change the language, so if you can get a key listener in your main app i think that would solve all probs.
sorry if this sounds confusing

I cant use the X key on my imac wired keyboard, the key viewer shows the two commands keys pressed when i hit x and the caps lock light is always on....thank you

I cant use the X key on my imac wired keyboard, the key viewer shows the two commands keys pressed when i hit x and the caps lock light is always on....not really sure what happened, but i didnt do anything different from my daily stuff
just an update....when i hit the right command key it respond normal (cmd v cmd c...etc) but when i hit the left command key it shows the x and two commands pressed as well as it delete what i'm working on i.e like backspace but takes out everything at once
thank you

Hi Moe,
Sounds mostly likje a bad KB, do you have another to test with?
Or...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Amount of key presses a user makes over time - BPM

Hi,
Im working on a small program that needs to get the amount of keypresses a user makes over time.
Basically its for calcuating the BPM a user is inputting. So a uers taps a beat for 5 seconds and the amount of tap is saved and multiplied by 12 to get the Users BPM.
So far i have this:
package Version1;
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.event.KeyEvent;
import java.awt.event.KeyListener;
import java.util.Timer;
import java.util.TimerTask;
import javax.swing.*;
public class muTap extends JFrame implements KeyListener, ActionListener {
    JTextArea display;
     * main - the main method
    public static void main(String[] args) {
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                theGUI();
     * muTap constructor
    public muTap(String name) {
        super(name);
     * theGUI - creates the gui for muTap
    public static void theGUI() {
        muTap frame = new muTap("muTap");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Set up the content pane.
        frame.addComponents();
        //Display the window.
        frame.pack();
        frame.setVisible(true);
     * adComponents - adds gui components to muTap
    public void addComponents() {
        JButton button = new JButton("Start");
        button.addActionListener(this);
        display = new JTextArea();
        display.setEditable(false);
        display.addKeyListener(this);
        JScrollPane scrollPane = new JScrollPane(display);
        scrollPane.setPreferredSize(new Dimension(375, 125));
        getContentPane().add(scrollPane, BorderLayout.PAGE_START);
        getContentPane().add(button, BorderLayout.PAGE_END);
    public void keyTyped(KeyEvent e) {
        //Do Nothing
    /** Handle the key pressed event from the text field. */
    public void keyPressed(KeyEvent e) {
        //TODO call the getBPMfromKboard() method
        taps++;
        System.out.println("Tap: " + taps);
    /** Handle the key released event from the text field. */
    public void keyReleased(KeyEvent e) {
        //Do Nothing
    /** Handle the button click. */
    public void actionPerformed(ActionEvent e) {
        //Do Nothing
        //initialCountdown(3, "Start Tapping Fool");
        countDown(3);
     * countDown - a simple countdown timer for use when getting users input.
     * @param time amount of time to count down from
     * @return      true when timer ends.
    public static int taps;
    public void countDown(final int time) {
        taps = 0;
        final Timer timer = new Timer();
        timer.scheduleAtFixedRate(new TimerTask()
            int i = time;
            public void run() {
                i--;
                String s = Integer.parseInt(i); // error because of this i.
                display.setText(s);
                if (i < 0) {
                    timer.cancel();
                    if(time == 3)
                        display.setText("Start Tapping");
                        countDown(5);
                    else if(time == 5)
                        display.setText("Number of taps: " + taps);
                        //System.out.print("Number of taps" +taps);
        }, 0, 1000);
}But i get errors when i try running it:
"Exception in thread "Timer-1" java.lang.RuntimeException: Uncompilable source code"
It doesnt seem to like me parsing int to string here:
String s = Integer.parseInt(i); Any ideas? or if youve got suggestions on another way to do it it'd be much appreiated.
Thanks!

Korvanica wrote:
It doesnt seem to like me parsing int to string here:
String s = Integer.parseInt(i);
Yikes, you've got that bit of code backward, there partner.
You use Integer.parseInt to parse a String into an int, not the other way around.
If you want to change an int to a String, do
String s = String.valueOf(i)or you can use the various formatters out there.

2 key pressing at a time?

i am currently making a java application that require 2 key pressing a the same time with KeyPressed(KeyEvent e)but it doesnt seem to work.does any body know how to do it? thanks

This is only supported with the "meta" keys (Control, Shift and Alt). Look at the KeyEvent for the methods to determine which meta key was pressed in combination with the other key.

Trap Key pressed in Forms 10g.

Hi All,
Have anyone trapped the keys which are pressed in Forms 10g. We have a requirement in which in a LOV Form when TAB key is pressed it should navigate to the next field and when ENTER key is pressed it should select the value from that field and get back to the field from where it was invoked.
We had tried http://forms.pjc.bean.over-blog.com/article-15980196.html from Francois Degrelle which traps he key pressed. But that is throwing us some error in JInitiator console.
Expecting a favorable reply from the forum users on this to .
Thanks in advance

Monsieur Degrell,
is it possible to listen just to one item in the form?
I have triedSet_Custom_Property( 'b_hilfe.bean', 1, 'INIT', 'b_help.search');in when-new-form-instance, where 'b_help.search' is the item i want to listen to,
but the bean still listen on every item in the form.
kind regards

How to get the actual key pressed in a UITextField

Hi all , now i develop a program on iphone SDK 3.0 GM.
I have an UITextField (created programmatically) and I have implemented the delegate as well as the UITextFieldTextDidChangeNotification so that I can react to changes in the text values.
However, I specifically want to know when the user presses the backspace key in the UITextField when there is currently no text in the field. I can't find where I can get a specific notification of the actual key pressed, as opposed to the resulting state of the text. I'm sure there is a way to do this...help?

I can imagine why you want to do it. I had the same problem myself and managed to circumvent it in a slightly painful way. What I did was to subclass UITextField to create a text field that always had text in it, even when it "seemed" empty. In fact the first character of the text is a space character, and then what follows is the actual text. In this way, your delegate will always get called about a backspace (when it's an attempt to delete the leading space character, obviously you should return NO in the textField: shouldChangeCharactersInRange: replacementString: method). I won't get into the details of exactly how to set everything up, like I said it is kind of elaborate and I wouldn't really recommend it unless you are desperate to have that kind of functionality.

My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?

My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?And all the sounds on my phone are on, even the keyboard clicks.

Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo, double check the volume button just in case. If you still can't hear the tones go into your settings>sounds and make sure the options are on.

Key Press Not Responding If You Go Back (re-do step)

I have a software simulation in which one of the steps is to enter some numbers into a text field and press the Enter key. Works good on the first pass. If you then click the Back button and go back to a previous step the Enter key will no longer work. I have search the forums and some blogs without any luck.
Example:
http://elearning.biworldwide.com/misc/Soft_Sim/Soft_Sim.htm
After you reach the text entry step and enter the correct numbers and press Enter, click the Back button (lower left) and back up to the Click Member step and re-preform the steps. When you reach the text entry the Enter key press will no longer work.
Source CP4 file:
http://elearning.biworldwide.com/misc/Soft_Sim/Soft_Sim.zip
Thanks for any assistance,
Kevinhttp://elearning.biworldwide.com/misc/Soft_Sim/Soft_Sim.htm

All apps in the recently used apps bar or dock which is accessed by pressing the home button twice are not loaded and running. Some apps like games that have been updated to do so will be in an idle state, most will be quit, and some will run in the background when leaving the app. The number of apps that can run in the background are very few and far between because there is no reason or benefit for the overwhelming number of 3rd party apps to run in the background.
http://whenwillapple.com/blog/2010/04/19/iphone-os-4-multitasking-explained-agai n/

Key press sound

Similar Messages

Maybe you are looking for