Keynote transitions: if I know the 'exact' duration based on audio chapter markers, how do I make the slide duration exact?
I have a listing in Numbers of the chapter marker start times (in an audio file from garage band).
So a simple calc should give me the intervals ... yes?
But it seems a 'dissolve' or a 'magic move' requires some sort of juggle between a delay and the transition time to make it sync.
True. Thanks BW. Was searching for a faster way to sync the timing of guitar fretboard animation frames to original soundtracks ... to a 16 x 9 movie.
Keynote actually does a good job of recording mouse click (right arrow) intervals when the cut is clean (no magic move or dissolve etc) with the narration record function but there was a dead end of attempts prior to that fork in the road trying to figure out the strange 'double it and minus it' formula for bridging the graphic smoothly with intervals (it does look better with dissolve) but there doesn't seem to be a consistent way to get it exact - as you say.
The killer app (for easily tuning clips in iMovie) would be a stopwatch (or something) that recorded a text file of intervals (in decimal) based on mouse clicks pressed while tapping away to a sound track. Garageband can deliver ... sort of ... and with some processing but ... the journey continues. Thanks again.
Similar Messages
-
On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?
Click on the Hot Corners.. button and look at the four definitions. In the picture below, if you moved the cursor to the right top of the screen, it would slide all the applications off the screen as you describe and show the desktop. Set it to "-" to deactivate.
-
Hello
As explained in the heading, I'm using LR 5.6 on a PC (Win 7). The Enter key should increase the exposure but it increases Contrast instead. How can I make the Enter key adjust the exposure, as it should? I have reset the settings to Default in the Develop module but to no avail. Please help! Thanks.
Kind Regards
Farrukh HyderI am not aware that the ENTER key should increase exposure, and it certainly does not increase exposure (or any other slider) on my Lightroom 5.6 (Windows 7)
If you click on the word Exposure, then the + and - keys increases or decrease exposure by 0.1 or -0.1 -
Based from my selection-screen, how can I make the parameter dynamic?
Hi experts,
Based from my code below and logic, I have to modify the loop at screen without removing the original IF condition in such a way that the parameter p_code will only be available for input if the radiobutton pr_edit is clicked by the user.
Again, thank you guys and have a great day!
SELECTION-SCREEN BEGIN OF BLOCK box1 WITH FRAME TITLE text-001.
PARAMETERS: pr_upld RADIOBUTTON GROUP grp MODIF ID id3.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 03(30) text-a11 FOR FIELD p_flnme MODIF ID id3.
PARAMETERS: p_flnme LIKE rlgrap-filename DEFAULT 'C:\' MODIF ID id3.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(32) text-002 FOR FIELD p_dcode MODIF ID id1.
PARAMETERS: p_dcode LIKE vbak-kunnr MODIF ID id1,
p_name1 LIKE kna1-name1 MODIF ID id1.
SELECTION-SCREEN END OF LINE.
PARAMETERS: pr_list RADIOBUTTON GROUP grp MODIF ID id4,
pr_add RADIOBUTTON GROUP grp MODIF ID id2,
pr_edit RADIOBUTTON GROUP grp MODIF ID id5.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 03(30) text-a12 FOR FIELD p_code MODIF ID id2.
*PARAMETERS: p_kunnr LIKE zts0001-kunnr.
PARAMETERS: p_code LIKE zts0001-cdseq MODIF ID id6.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK box1.
IF v_compflag EQ space.
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-input = '0'.
screen-output = '1'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'ID2'.
screen-active = '1'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'ID3'.
screen-active = '0'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'ID4'.
screen-active = '1'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'ID5'.
screen-active = '1'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'ID6'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF v_compflag NE space.
LOOP AT SCREEN.
IF screen-group1 = 'ID1'.
screen-active = '0'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'ID2'.
screen-active = '0'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'ID3'.
screen-active = '1'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'ID4'.
screen-active = '1'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'ID5'.
screen-active = '0'.
MODIFY SCREEN.
ELSEIF screen-group1 = 'ID6'.
screen-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.Write the below code in selection Screen Output Event
AT SELECTION-SCREEN OUTPUT.
IF pr_edit EQ 'X'.
LOOP AT SCREEN.
IF ( screen-group1 = 'ID6' ).
screen-input = 0.
screen-invisible = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
Enjoy Coding.
Thomas. -
How can I make the rolumn and row headers appear on the printed sheet?
I am working in Numbers'09. I want to print out my chart with the column letters and row numbers showing.
How can I make the rolumn and row headers appear on the printed sheet?g,
Those annotations are called "Labels", and they are only visible during editing when a cell selection is made within the table. If you need to have the labels on your final output, you can create labels in Text Boxes and position them adjacent to the table.
Jerry -
How can I make the popup with empty fileds and create new record?
I would like to use a popup to create new record.
I created a af:popup by drag and drop a VO from data control to jsff. then, I created a button and place a af:showPopupBehavior. I was able to popup window by click the button.
however, the window filled with the information from the 1st record. and when I select a record in table and click popup, the popup is filled with that record.
How can I make the popup with empty fileds and create new record by saving the popup?
ThanksYou can have edit and new buttons, in the PopupFetchEvent identify button source (using popupFetchEvent.getLaunchSourceClientId()) if new button clicked clear the binding using below code.
If you want to see empty fields, in the popup PopupFetchEvent clear the input component bindings.
resetBindingValue("#{bindings.<componentid>.inputValue}", null);
public static void resetBindingValue(String expression, Object newValue) {
FacesContext ctx = FacesContext.getCurrentInstance();
Application app = ctx.getApplication();
ExpressionFactory elFactory = app.getExpressionFactory();
ELContext elContext = ctx.getELContext();
ValueExpression valueExp = elFactory.createValueExpression(elContext,expression,Object.class);
Class bindClass = valueExp.getType(elContext);
valueExp.setValue(elContext,newValue);
} -
How do I make the UK Safari my default browser when I log on ?
Excuse me if this sounds stupid, but Im on broadband and and when I log onto Safari I get the USA version, so if I want to go to the Store page I get prices in dollars, which means I then have to go to a bookmark for the Apple Store UK to get what I want. So heres my problem:
1. Am I correct that there is a UK Safari browser and if so
a) Is it identical to the USA Safri browser with news etc
b) How would I make the UK version my default bowser ?
As usual hope this makes sense !
AlbertAlbert,
Although some default bookmarks may be specific to the U.S., Safari is generally not country specific. User modification is simply a matter of entering your preferences or deleting unwanted bookmarks.
If you want the UK store as your "Home page", open Safari>Preferences...>General>and paste http://www.apple.com/uk/ into the "Home page:" field.
;~) -
i need to know how to edit a drawing - basically remove the arrows and text but at the same time match the background of the existing pic. then re add new text. how do i erase the arrows and text and arrows but match current background of pic. step by step explanation please beginner
Please post (a relevant section of) it right on this Forum.
-
I need to play a song in a row in a Keynote presentation, how do I do this ? I use to drag and drop the mp3 in Keynote but it stops playing when the slide move to the other one... how can I make the song keep playing through out the presentation ?
Thanks.Drag the file into the audio window in the Document inspector...
-
I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?
I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck! -
How do i make the same song have two different genre
how do i make the same song have 2 different genre for 2 different playlist?
In my example, we will create a Smart Playlist that includes all songs in the genre Acid Jazz and one extra song that has the genre of Afro-beat. That extra song will be "Music For Gong Gong". To create your Smart Playlist, substitute the genre types and the song title (anything with < > around it) for the ones you want.
In your iTunes Library, either click on the + symbol in the lower left corner of iTunes playlists, or click CTRL+ALT+N to create a New Smart Playlist. The following will appear (my orange numbering):
1. Using the drop-down menus, change "Artist" to Genre, "contains" to is and in the text box (marked 1) type in the text <Acid Jazz> (remember to chose the genre you want, and with the exact spelling used for that genre in your library - don't type in the < > obviously!)
2. Click on the + symbol at the end of that line (marked 2), which creates an additional line
3. In this new line, change "Artist" to Grouping, change "contains" to is and in the text box type in <Acid Jazz> (Notice that I have used the same name as the genre itself. You don''t have to, but it makes it easier to add those extra songs. You'll understand why in step 7.) You now have a box like this:
4. Change the Match rule at the top (notice it has already changed in the two screenshots above) to any. This is a crucial step, do not forget it.
5. Notice that I have also selected Match only ticked items. This is optional, but selecting it will exclude songs that have been unticked. If you use Sync only ticked songs and videos, this can be useful way of keeping the Playlist the same as the one on your device.
6. Click the OK button. You now have the opportunity to name your Playlist. I have chosen <Genre is Acid Jazz +> so that it is obvious what it is.
So that's the Playlist created. As you can see, <Genre is Acid Jazz +> has 89 songs in it and I can assure you that's how many songs are in the Acid Jazz genre section. Now, all that remains is to add the additional song.
7. Find your "two-genre" song and click File/Get Info/Info (or CTRL+I - that's an "eye") to bring up the edit song option. In the Grouping field, type in <Acid Jazz> (remember to use the same text you used in the Grouping box in step 3. This means you only have to type in the same genre name to the Grouping box, to get it into that particular Playlist. I mentioned this in step 3).
Notice that we are not changing the Genre. Click the OK button.
Now look at the Playlist <Genre is Acid Jazz +> again.
Notice that is now has 90 songs and at number 60 is the <Music For Gong Gong>. Note that the genre for that song is still Afro-beat, so the song still appears in the genre Afro-beat as well.
To add any other song to this particular two-genre Playlist, simply find the song in your Library and type <Acid Jazz> into the Grouping box, as in step 7. It's that simple!
Here's an extra tip. Too many Playlists and having issues finding your way through them?
I have renamed the Playlist Genre is Acid Jazz + so that it is now named Acid Jazz Plus and I've dropped it into a Playlists Folder named GENRES (capitals makes it easy to find the folders on iDevices).
Notice that here in iTunes, Playlists are sorted in the following order:
Playlist Folders (and then the Smart Playlists and Regular Playlists inside it)
Smart Playlists
Regular Playlists
... but on my iPod Classic (for example), they are sorted in alphabetical order. So to find the Playlist Acid Jazz Plus, go into the Playlists menu and scroll down to G, go into GENRES, and in there will be Acid Jazz Plus, with all 90 songs!
I hope you will give this a try, you have nothing to lose but a little time. Let us (all) know how you get on with it. We'd like to know. -
Tried the posted solution for the RETR problem and it works once then it returns. Once the email dl'ds the file deleted per the instructions returns. How do you make the change permanent?
Hi DOC808HI
# I don't know what you mean by "posted RETR solution". Could you please post a link to the suggested solution? Perhaps you are referring to this thread: https://support.mozilla.org/en-US/questions/991792 ?
# Anyhow any further troubleshooting information you can provide will be great e.g. Your Operating System Version (XP, 7, Mac OS X Mavericks), your anti-virus if any, your mail provider, your ISP, what you did, what happened with exact error message, what happened
Cheers!
...Roland -
How can I make the combo box turn to the value of black.
When the show button is pressed (and not before), a filled black square should be
displayed in the display area. The combo box (or drop down list) that enables the user to choose the colour of
the displayed shape and the altering should take effect immediately.When the show button is pressed,
the image should immediately revert to the black square, the combo box should show the value that
correspond to the black.
Now ,the problem is: after I pressed show button, the image is reverted to the black square,but I don't know
how can I make the combo box turn to the value of black.
Any help or hint?Thanks a lot!
coding 1.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.event.*;
public class test extends JFrame {
private JPanel buttonPanel;
private DrawPanel myPanel;
private JButton showButton;
private JComboBox colorComboBox;
private boolean isShow;
private int shape;
private boolean isFill=true;
private String colorNames[] = {"black", "blue", "cyan", "darkGray", "gray",
"green", "lightgray", "magenta", "orange",
"pink", "red", "white", "yellow"}; // color names list in ComboBox
private Color colors[] = {Color.black, Color.blue, Color.cyan, Color.darkGray,
Color.gray, Color.green, Color.lightGray, Color.magenta,
Color.orange, Color.pink, Color.red, Color.white, Color.yellow};
public test() {
super("Draw Shapes");
// creat custom drawing panel
myPanel = new DrawPanel(); // instantiate a DrawPanel object
myPanel.setBackground(Color.white);
// set up showButton
// register an event handler for showButton's ActionEvent
showButton = new JButton ("show");
showButton.addActionListener(
// anonymous inner class to handle showButton events
new ActionListener() {
// draw a black filled square shape after clicking showButton
public void actionPerformed (ActionEvent event) {
// call DrawPanel method setShowStatus and pass an parameter
// to decide if show the shape
myPanel.setShowStatus(true);
isShow = myPanel.getShowStatus();
shape = DrawPanel.SQUARE;
// call DrawPanel method setShape to indicate shape to draw
myPanel.setShape(shape);
// call DrawPanel method setFill to indicate to draw a filled shape
myPanel.setFill(true);
// call DrawPanel method draw
myPanel.draw();
myPanel.setFill(true);
myPanel.setForeground(Color.black);
}// end anonymous inner class
);// end call to addActionListener
// set up colorComboBox
// register event handlers for colorComboBox's ItemEvent
colorComboBox = new JComboBox(colorNames);
colorComboBox.setMaximumRowCount(5);
colorComboBox.addItemListener(
// anonymous inner class to handle colorComboBox events
new ItemListener() {
// select shape's color
public void itemStateChanged(ItemEvent event) {
if(event.getStateChange() == ItemEvent.SELECTED)
// call DrawPanel method setForeground
// and pass an element value of colors array
myPanel.setForeground(colors[colorComboBox.getSelectedIndex()]);
myPanel.draw();
}// end anonymous inner class
); // end call to addItemListener
// set up panel containing buttons
buttonPanel = new JPanel();
buttonPanel.setLayout(new GridLayout(4, 1, 0, 50));
buttonPanel.add(showButton);
buttonPanel.add(colorComboBox);
JPanel radioButtonPanel = new JPanel();
radioButtonPanel.setLayout(new GridLayout(2, 1, 0, 20));
Container container = getContentPane();
container.setLayout(new BorderLayout(10,10));
container.add(myPanel, BorderLayout.CENTER);
container.add(buttonPanel, BorderLayout.EAST);
setSize(500, 400);
setVisible(true);
public static void main(String args[]) {
test application = new test();
application.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
coding 2
import java.awt.*;
import javax.swing.*;
public class DrawPanel extends JPanel {
public final static int CIRCLE = 1, SQUARE = 2;
private int shape;
private boolean fill;
private boolean showStatus;
private int shapeSize = 100;
private Color foreground;
// draw a specified shape
public void paintComponent (Graphics g){
super.paintComponent(g);
// find center
int x=(getSize().width-shapeSize)/2;
int y=(getSize().height-shapeSize)/2;
if (shape == CIRCLE) {
if (fill == true){
g.setColor(foreground);
g.fillOval(x, y, shapeSize, shapeSize);
else{
g.setColor(foreground);
g.drawOval(x, y, shapeSize, shapeSize);
else if (shape == SQUARE){
if (fill == true){
g.setColor(foreground);
g.fillRect(x, y, shapeSize, shapeSize);
else{
g.setColor(foreground);
g.drawRect(x, y, shapeSize, shapeSize);
// set showStatus value
public void setShowStatus (boolean s) {
showStatus = s;
// return showstatus value
public boolean getShowStatus () {
return showStatus;
// set fill value
public void setFill(boolean isFill) {
fill = isFill;
// set shape value
public void setShape(int shapeToDraw) {
shape = shapeToDraw;
// set shapeSize value
public void setShapeSize(int newShapeSize) {
shapeSize = newShapeSize;
// set foreground value
public void setForeground(Color newColor) {
foreground = newColor;
// repaint DrawPanel
public void draw (){
if(showStatus == true)
repaint();Hello,
does setSelectedIndex(int anIndex)
do what you need?
See Java Doc for JComboBox. -
I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.
I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend -
How do you make the dashboard open automatically at login?
Ok, you know in your dock you can right click on any application icon and it will come up with some options, one of them being "Open at Login." Well, I want to automatically open the dashboard at login, but when I right click on the dashboard icon it does not give that option. How do I make the dashboard open automatically when I log in?
There is a freeware app called "Dashboard Starter" that will start the DB up when you log-in, or anytime you force quit the Dock.app.
Search www.macupdate.com for it.
iSMH
Maybe you are looking for
-
WIP (Work In Progress) Calculation in Process Industry
Queries : What is the significance of Yield in PP - PI How can we co-relate it with the WIP Calculation Fact : Generally when the Order is having Status CNF (Confirmed) & TECO (Technically Completed), they are not considered for the WIP C
-
my ipod will not sync at all. i can add songs to itunes and i can listen to those songs on itunes but, the songs will not sync on to my ipod. i got a brand new ipod and it has no songs or anything on it, it just will not sync. can anyone help me out?
-
does anyone know what an " attempt to burn failed (-50)" might mean? rest of computer works fine including burner itself but does not seem to be communicating with itunes. any help or advice would be appreciated.
-
Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.
-
Directly Printing the Reports Output to a Printer in 10g.
Hi All, We need to print directly from the reports to a printer. How it can be achieved? i.e Reports running in client machine and when I hit the Run Button in my form the report runs. Similarly the report output should be printed to the printer atta