Kindly advise how i can export and distribute settings done on "about:config == network.automatic-ntlm-auth.trusted-uris" to all computers in the network. What is the best way to effect this changes on all Machines?

I want user to access sharepoint on Mozilla without being prompted for credentials instead it should use logged on credentials

Hi Meshackl, there is a very simple way with the distribution.ini file. Mike Kaply describes how to do that here:
http://mike.kaply.com/2012/03/26/customizing-firefox-distribution-ini/

Similar Messages

How i can export and distribute setting; network.automatic-ntlm-auth.trusted-uris" to all computers in the network (With Folder Rederiction enabled)?

Hi,
We are about to enable SSO in our environment. As a result, I need to modify the value for user_pref("network.automatic-ntlm-auth.trusted-uris", "my domain");>>prefs.js.
I created a simple .bat file to make the necessary mod and add the line to pref.js. When I run the file it outputs the prefs.js to the same location, not the Mozilla AppData folder. We are a Win7 environment with folder redirection enabled. Therefore, our user's Mozilla AppData folder is located at \\my domain\dfs\XenDesktop\Profiles\username\AppData\Mozilla\Firefox\Profiles\default (random default profile name). My question is what is the best course of action to add this pref. to all PC user's pref.js file? keep in mind the pref.js is located on the hidden network path I included above. I apologize if my question is not easy to understand.

cor-el, thanks for you reply.
Yesterday, prior to my post, I did try the mozilla.cfg method. I read your reply to another FF user's, similar question. Here are my complete steps.
1. created a txt file with the following info: defaultPref("network.automatic-ntlm-auth.trusted-uris", "ngs.org"); // set new default value
2. saved the file as mozilla.cfg
3. dropped the file in C:\Program Files (x86)\Mozilla Firefox
4. Created local-settings.js with the following info:
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
5. dropped the file in C:\Program Files (x86)\Mozilla Firefox\defaults\pref
When I launch Firefox the network.automatic-ntlm-auth.trusted-uris should say ngs.org, but the value is still blank.
Any help is greatly appreciated.

My Macbook pro was stolen 09/12, the police just returned it to me. I want to remove all the data and start over. Format the drive's etc. I have windows 7 on 1 partion and mountain lion OSX on the apple partition. How is the best way to do this?

My Macbook pro was stolen 09/12, the police just returned it to me. I want to remove all the data and start over. Format the drive's etc. I have windows 7 on 1 partion and mountain lion OSX on the apple partition. How is the best way to do this?

Have a look here...
what-to-do-when-your-hard-drive-is-full.html

TS1314 I have lots of organized photos on my PC and I want to keep them organized to sync to ipad.... how is the best way to do this?

I have spent a lot of time saving, organizing and arranging photos (for the last 7 years) on my PC, and would like to know the best way to transfer these, AND MAINTAIN THE ORGANIZATION OF THE FOLDERS, to my new ipad (and later, my iphone). I have a really good system, and I do not want to have to do it all over again, on the ipad. I DO NOT want to subscribe to another monthly service fee (i.e. the iCloud) but DO have iTunes on my PC.
What is the simplest method to do this ? I have tried synching, but, each time have lost photos (on my ipad) OR have had NO ORGANIZATION AT ALL to the photos once synced. I have all these photos (5.6gb) in the My Pictures folder, then subdivided into years, then subdivided into events and months within the years. So, my transfer of the My Picures folder, completely transfers all of them, but with NO further organization. Again, I have spent years doing this, and don't want to have to re-invent the wheel.
Can someone advise (or even better, lead me to a youtube video) that accurately shows the best way to do this ?
Thank you, in advance, for your help.
p.s. I particularly enjoy Dan Nations very informative articles on how to get the best from my products. And, wish Apple would explain "how it works" regarding the syncing methods on the Operating System. It is the only thing I "don't get" about using my iPad..... meanwhile I LOVE my new mini ! ! ! ! ! ! ! thanks Apple, for keeping things simple.... Please don't change that !

Correct, it will only be one-level, the Photos app doesn't support sub-albums - the sub-folders photos will be included in the parent's album.
If you select My Pictures at the top of the Photos tab when syncing, then you should get an album for each folder that is directly under it - so if I understand correctly what you described then that would mean an album for 2013, one for 2012 etc. And each of those should include all the photos in the subfolders under it - so 2013 would include the photos from the events and months subfolders under it.
You can't sync them separately, only the contents of the last sync remains on the iPad, by not including a folder in the next photo sync you are effectively telling iTunes that you no longer want that folder/album on the iPad so it will be removed and be replaced by the contents of the new sync (you can't delete synced photos directly on the iPad, instead they are deleted by not including them in the next sync).
The app that I use, Photo Manager Pro, allows you to select and copy a folder (via FTP), but you would need to select each subfolder individually, which if you have a lot would be time-consuming (I think that if you select '2013' it would ignore the folders beneath it).

Urchased a new desktop pc and I want to move itunes and all files including IPAD apps to my new computer and delete off my old one. What is the best way to do this?

I just purchased a new desktop PC and want to move Itunes and all my Ipad Apps to new computer, and delete off my old computer. What is the best way to do this?

Hi,
See Here for Transferring your iTunes Library
http://support.apple.com/kb/HT4527
Make sure Everything is working to your satisfaction Before Deleting anything from your old computer...
Cheers,

Form fields in LiveCycle. I want to allow users to add URLs to a form so that they can be clicked and opened on the web by form reviewers (users). what is the best way to achieve this?

Form fields in LiveCycle. I want to allow users to add URLs to a form so that they can be clicked and opened on the web by form reviewers (users). what is the best way to achieve this?

Once the user has entered the URL they want to add to the form. You can use the loadXML function to implement some special text in a label...
var linkValue = "<?xml version=\"1.0\" encoding=\"UTF-8\"?><exData contentType=\"text/html\" xmlns=\"http://www.xfa.org/schema/xfa-template/2.8/\"><body xmlns=\"http://www.w3.org/1999/xhtml\" xmlns:xfa=\"http://www.xfa.org/schema/xfa-data/1.0/\" xfa:APIVersion=\"Acroform:2.7.0.0\" xfa:spec=\"2.1\"><p style=\"font-weight:bold;text-decoration:none;letter-spacing:0in\">The new link the user have entered is:<a href=\"" + textfield.rawValue + "\">textfield.rawValue</a></p></body></exData>";
this.resolveNode("lblURL").value.exData.loadXML(linkValue, 1, 1);

My business has 100 ipads 3g with no control at the moment - i need to now control the ipads - what apps they can use - and restict certian use on the ipads - whats the best way to do this - it will need to be done remotley.

my business has 100 ipads 3g with no control at the moment - i need to now control the ipads - what apps they can use - and restict certian use on the ipads - whats the best way to do this - it will need to be done remotley.

MDM -- moble device management
MDMs
Airwatch, Meraki, MobileIron, Profile Manager on OS X Server, or Zenprise
For a comparison see this page:
http://www.enterpriseios.com/wiki/Comparison_MDM_Providers
Airwatch
http://www.air-watch.com/
Meraki -- A free MDM [ expect lots of email and phone calls about upgrades ]
http://www.meraki.com/products/systems-manager/
https://discussions.apple.com/thread/4067210?tstart=0
Good howto by Sergio Sosa.
https://discussions.apple.com/thread/2594001?start=15&tstart=0
MobileIron
http://www.mobileiron.com/
Profile Manager by Apple
Zenprise
http://www.zenprise.com/

My old computer is dying and I want to transfer my account to my new computer. I will not be using the old computer at all. What is the best way do do this?

I want to stop using my old computer completely and transfer my itunes account to my new computer. What is the best way to do this?

A simple search

I'd like Time Machine to backup my personal account's files separately from my guest account's files. Both have big files. What's the best way to do this? Should I connect 2 external HD to my new iMac, one for each account?

I'd like Time Machine to backup my personal account's files separately from my guest account's files. Both have big files. What's the best way to do this? Should I connect 2 external HD to my new iMac, one for each account?

NeuroBrain wrote:
Since my new external hard drive is have a lot of space, I'm thinking of splitting it for Time Machine and external storage.
This is a common mistake and I highly advise against it.
1: TimeMachine saves states of changes and thus requires more room on the TM drive than the boot drive it's backing up.
2: Something happens to the TM drive, loss, theft, dropped, power surge, etc., you lose both backups.
3: The storage drive might become a portable need, with it being on the TM drive, now your increasing the risk to the TM backup that something could happen to it along with the storage drive, due to increased movement.
Seriously, have a read,
Most commonly used backup methods
it's ASC User Tip that saves us regulars all the trouble of having to repeat ourselves over and over again in the posts, because we tend to forget things too, or not here sometimes etc.
"Plan for the worst and the good will take care of itself" - Donald Trump

I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?

I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?

If both have Firewire ports then you can accomplish your goal by using Target Disk Mode. If this is not possible then you can do using an external drive or if you have a local network connect both to your network and use filesharing between the two computers.
File Sharing on Macs
Mac 101- File Sharing

I have two videos and I would like to use parts of both videos with one audio track what is the best way to edit this?, I have two videos and I would like to use parts of both videos with one audio track what is the best way to edit this?

In Final Cut Express I have two videos I'd like to merge parts of each video into a final film. What is the best way to do this in FCE?

Hi
I use a slightly different way than Alchroma.
Same
• One video on track 1 and the other on Video.track 2
• Resize to 25% and move one to the left and the other to the right
Diff
• I don't use the blade tool
• I use the Pen tool and change the transparency - then I get fast or slow transitions in same stroke and easy to fine-tune later if needed. (But this can be done with the Roll-tool if Blade is used - so it might be as easy)
Final
• Resize to 100% and Center
Video is done
Audio - very close to this by changing the level so that best audio will dominate
• Pen tool here too
But that's me - the Alchroma way is as good as this or may be better for some
Yours Bengt W

Is this possible and the best way to approach this?

hello all, back again with more questions
What I would like to do is load an external swf (preloader) into a container swf, when the preloader swf is loaded, run code from the preloader's document class that will check to see if the container swf is fully loaded. Once the container swf is fully loaded, load in another swf and unload the preloader swf.
I would like to keep all code in external classes and off timelines while creating a situation where I can load this preloader swf into any parent swf and do that check. is this possible and the best way to approach this?
any advice/help would be great.

Why not just do it the more straightforward/normal way and use the preloader to load your other files? The preloader would load the 'container' you have now, and when it's done load the other swf you mentioned.

Contacts Sync - I have my contacts on iphone5 and MacBook Pro 2012. I just purchased a MacBook Air 2013 and want the same contacts on that device. What is the best way to do this? Non-techie. Thanks

I have my contacts on iphone5 and MacBook Pro 2012. I just purchased a MacBook Air 2013 and want the same contacts on that device. What is the best way to do this? Non-techie. Thanks

Follow the instructions for enabling your iCloud account on the MBAir here > Apple - iCloud - Learn how to set up iCloud on all your devices.

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this?

I am moving from Southern California to Maui, Hawaii and I need to figure out the best way to get my 24 inch iMac across the ocean. Does anyone know the best way to do this? I have found GearGrip's LCD harness so that I can do carry-on onto the plane... Or maybe use a Pelican Case to do it as a "checked bag"? Or any other suggestions??! Please help!
Thanks so much!!

I don't recommend you send the iMac in a checked bag. Might get damaged.
Check the airlines website for carry on guidelines.
Or, if you have the original box that the iMac came in, if you have someone who can pick up the iMac for you, send it ahead Fed Ex and insure the package.
Just make sure the display is covered to protect it. A blanket perhaps.
Aloha ...

I've been using older printers (including an imagesetter) connected to10.5.8 With a new 10.6 machine I'm looking to still use the printers. I can use the olderG5 as a sever if need be. What would be the best way to do this? ine

I've replaced my 10.5.8 with another machine 10.6.8 which as we know doesn't support Apple Talk which has been used to print to 2 bulletproof older printers and an imagesetter. I wan't to keep using the printers and can use the 10.5.8 as a server. What is the best way to do this?

Hi
You could do this a number of ways. Using the LPD Daemon might work best for your location?
First: assign the machine you're going to use as the 10.5.8 'server' a fixed IP address.
Second: add desired printers to that machine using the usual methods.
Once added share them using the Print Sharing option in the Sharing Preferences Pane. On the 10.6.8 machine add the printer using the IP address of the 10.5.8 'server'.
System Preferences > Print & Fax and click the '+' icon. Click on the IP Icon and key in the IP address you previously assigned. Leave the Queue field alone and select the relevant PPD from the Print Using field (see below). You'll have to search for these yourself.
You don't have to 'install' the PPDs on the 10.6.8 machine as such. Simply copying them over from their location on the 10.5.8 machine (use a memory stick to do the transfer) to the same location on the 10.6.8 machine will be enough.
There should be no need to restart.
HTH?
Tony

Kindly advise how i can export and distribute settings done on "about:config == network.automatic-ntlm-auth.trusted-uris" to all computers in the network. What is the best way to effect this changes on all Machines?

Similar Messages

Maybe you are looking for