King com games do not work is there an answer why

i have downloaded motzilla and the king com games do not work
i have turned off ie 11 still nothing
also i have got downloaded the adobe things required

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Similar Messages

Some Videos and Games Do Not Work, Mac Snow Leopard

This is a problem I have actually had for a while, but it never really affected much that I considered important. Now it is just getting annoying.
Basically, certain video players and online games do not work. Most video players outside of YouTube will not work. The player will load, but the video never does. For example, the most recent video I have had trouble with is the Nickelodeon video player for The Legend of Korra. When I try to watch that, I get a black box, and a “Loading” type image pops up, swirls around once, and then disappears. After that, the whole thing becomes unresponsive. This is typical of many, but not all, video players I have encountered on the web.
I am not sure if it is related, but I have also had trouble with various games. Often time, they will work fine until reaching some transition point, such as the end of a level, and then they will become unresponsive. A good example here is the game Bloons Tower Defense 4. This is a game I know was responsive on my older system. But now, when it loads the level, it freezes up before loading the available towers to place and becomes otherwise unresponsive.An example is shown below. The top-left question mark box in the right-hand sidebar should reveal a dart monkey, and my starting money should be filled, but instead the game hangs up. I have had similar hang-ups on a number of games, so I am certain the problem is not just with this game.
As I said, I have had this problem for a while now. I have upgraded both Flash and my browsers a number of times since they started. I have these problems in all my browsers (Safari, Opera, Camino, Firefox), so it seems to be a problem with Flash. I have also tried uninstalling and re-installing flash and disabling all other browser plug-ins.
I am using a MacBook Pro with Macintosh OS X 10.6.8 Snow Leopard, 2.53 GHz Intel Core i5, with Flash 11.2.202.233. Current Browsers: Firefox 11.0, Opera 11.61, Camino 2.1.2, Safari 5.1.5
Any ideas what I could be overlooking?

Hey, it is getting them to work. Although I still have the “URL Not Found” error on BTD, and I get a whole different debugger error on Korra. But none of the errors prevent the associated items from working. Hopefully this will work in the other places I have had trouble with.
Anyway, the new error for Korra was:
Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: http://pixel.quantserve.com/api/segments.xml?a=p-94wNw88f65Rhk
    at com.mtvnet.reporting.agents::QuantcastReporter/sendDemoData()
    at com.mtvnet.reporting.agents::QuantcastReporter/onCustomData()
    at org.osflash.signals::Signal/dispatch()
    at com.mtvnet.reporting::ReportingManager/dispatch()
    at com.mtvnet.reporting::ReportingManager/onCustomData()
    at com.mtvnet.mediaplayer.view::ReportingMediator/onRegister()
    at org.puremvc.as3.multicore.core::View/registerMediator()
    at org.puremvc.as3.multicore.patterns.facade::Facade/registerMediator()
    at com.mtvnet.mediaplayer::ApplicationFacade/registerMediator()
    at com.mtvnet.mediaplayer.command::ModelPrepCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at org.puremvc.as3.multicore.patterns.observer::Notifier/sendNotification()
    at com.mtvnet.mediaplayer.command::InitializeCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at org.puremvc.as3.multicore.patterns.observer::Notifier/sendNotification()
    at com.mtvnet.mediaplayer.model::ConfigLoader/onReady()
    at com.mtvnet.mediaplayer.model::ConfigLoader/set xml()
    at com.mtvnet.mediaplayer.command::LoadConfigCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at com.mtvnet.mediaplayer::ApplicationFacade/startup()
    at com.mtvnet.mediaplayer::MediaPlayerController/onAddedToStage()
    at com.mtvnet.mediaplayer::MediaPlayerController/initialize()
    at com.mtvnservices.media.as3player.view.mediator::MediaPlayerMediator/initPlayer()
    at com.mtvnservices.media.as3player.controller::InitPlayerCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at org.puremvc.as3.multicore.patterns.observer::Notifier/sendNotification()
    at com.mtvnservices.media.as3player.controller::ViewPrepCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at com.mtvnservices.media.as3player.controller::ModelPrepCommand/execute()
    at org.puremvc.as3.multicore.core::Controller/executeCommand()
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at org.puremvc.as3.multicore.patterns.observer::Observer/notifyObserver()
    at org.puremvc.as3.multicore.core::View/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/notifyObservers()
    at org.puremvc.as3.multicore.patterns.facade::Facade/sendNotification()
    at org.puremvc.as3.multicore.patterns.observer::Notifier/sendNotification()
    at ConfigLoaderProxy/onConfigLoad()
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()

A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touchscreen not working plus there are blured lines across the screen and I can't see anything that it displays. Now when I try too connect my iPhone 4 t

A few months back I Dropped my iPhone 4 and I cracked my screen and now i cant unlock my phone due to touch screen not working plus there are blurred lines across the screen and I can't see anything that it displays.
Now when I try too connect my iPhone 4 to iTunes on my computer at home an error message comes up saying that I have to unlock my iPhone 4 for it to communicate to my device.
But the problem is that I can't unlock my iPhone 4 because I'm unable to see the key pad and my touch screen no longer responds when I touch it.
I just want to reset my iPhone 4 back to its Factory Settings & start all over from the beginning.
How can I unlock my iPhone 4 with iTunes on my computer or any other option you suggest me trying.
Thank you in advance,
SiHero

If you have had a "local guy "repair your iphone you will not get any support from Apple for warranty OR post warranty
If Verizon return it to Apple it wil not be handled by Apple
If Verizon also use unauthorised repairers you may be lucky
(Apple do not sell parts to local guys or anyone else )

After upgrading to maverick my epson WF-2540 scanner will not work. There are no upgrades showing so what do I do?

After I upgraded to Maverick my Epson WF-2504 scanner will not work. There is no software update showing necessary either. I have gone to the Epson website but it doesn't offer a download. It tells me to go to "software update" ??? Any suggestions?

Thanks Arthur,
I was hoping for a good bubble bursting, but I tried that HP "update" as soon as my printer stopped responding. I really really wanted my bubble popped.
One needs the Apple supplied driver for this work. It will not work because the driver to basically function on the updated Mavericks is not supplied by Apple Updates, so the HP driver that stops printing an extra page is rendered useless. I spent, wasted two days going back and forth between Support threads, HP chat and on the phone, through all the Mac channels where I was told that the 2011 HP was antique. HP said Apple had the drivers. So, they pointed a finger at one another with this unlucky customer caught in the crossfire. HP said Mac did it and Mac said HP did it. BOOM ! goes the guy in between who spent a good bit of money to have good equipment. What is wrong with expecting a printer to last beyond 3 years, or for a back up drive to last more than 3 years?
I do appreciate the attempt to help though. It was here in Discussions where I was guided to the gimp driver, drivers which in the past always worked when needed but in this case something wicked about Mavericks prevents it from working. No matter how many times HP says it works on their site all you have to do is try and then speak with customer service to find out that in a parellel universe this may logically hold. It does not hold here. If it were the case that by working in Lion it would work in Mavericks then there must be something wrong with me. But why, APPLE, is it that one day it works, do the update and then it does not when Lion was the previous OS? I did Everything, every single thing recommended by people who had good ideas and wanted to help but all too often the facts tell us nothing of the world. Facts are tools used to decieve, the world is where it works or does not work and in this case Mavericks has cost me close to $300. Probably not a big deal in some cases, but money is money. When it is gone it is gone.
I followed the complete uninstall, going into library and removing all HP, then restarting and lo and behold HP driver for 4500 not only was not present but along the way my 500gig back up drive died, as in dead, nothing.
Of course I will not buy another HP product. If you go to the list of drivers Mac says it carries the HP Officejet 4500 wireless may be present but is not carried by Apple. I have tried Apple update over and over. What I have done is wasted my time and money. In one fell update I lost a printer and a back up drive. No storms, no loss of electricity, no boogie men lurking, no malware, no gremlins, nothing but an innocent customer updating when Apple said "update". Sure it is serendipity that both my printer and back up drive died on the same day at the same time following the Mavericks update. Who am I but a loyal customer? I must be stupid because my equipment stopped responding after the update. It is not new that there are bugs and glitches following updates. I was a beta tester for OS X, it wiped my computer clean, but I understood, it was beta.
A friend told me the same about planned obsolescence in that since printers are cheap and ink is expensive they don't really care about customer satisfaction. Three years old is antique, out of date. We should and must all be angered by this hatred for the customer shown by manufacturers across the board. Blaming the customer is ridiculous and absurd but not unheard of, in fact it has become the rule of thumb from the other side. The customer is innocent. All we want is to buy premium equipment and to have it behave in a manner befitting the cost. I am an Apple user since 1994. I designed a restaurant on a 333 mhz black and white Mac. You know, the big floppy disc one. I am not new to Apple. Fiercely loyal for 20 years. This is the most angered I have been by the flippant attitude shown to us all.
Thank you for giving the links and hopeful advice. I tried them all when I first had the troubles. The good people in discussions, not the Apple plants, but the users, tried their best. I thought that by coming back later there would be updates and new links that would help. But no. Maybe one day. HP lost a customer, it means nothing to any of the manufacturers when a customer is ridiculed by their cynical attitude towards the customer. Maybe there will be someone else to come along here that has had similar experiences and found a way to fix. Used to be a gimp driver could do the trick. Used to be a way. I fear we lose control of our equipment more and more every day. This is not a rant. It is a somewhat sad expression of having been ripped off. Discussions here have helped in the past but the more things advance the less we matter. And as in the past when I was mad about an Apple failure a member sent a fix and I printed the fix for others to use in return. We help one another in the best of ways. Please spread the word, maybe there will be a fix to show up here sometime. I kissed my iOmega back up drive and the 500 gigs of writings, photos, backups and music goodbye, gone forever, poof! But the HP printer is still here on my desk. I don't want to give up hope.

There is a problem with my apple watch.it is not working well .There is a problem in its charging .The repairers says that contact to your company and ask them to provide you its software. Please help me.

There is a problem with my apple watch.it is not working well .There is a problem in its charging .The repairers says that contact to your company and ask them to provide you its software.
Please help me.

Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
As to your issue, Apple does not and never has made a wristwatch as such. The only thing close to a watch that they have made was the 6th-generation iPod nano:
http://support.apple.com/kb/ht1353#iPod_Nano_6G
which has a clock feature and which some people have worn as a wristwatch. Is that what you mean?
Message was edited by: varjak paw

I installed Lion and now my MS office will not work, is there a way to revert back my original software?

I installed Lion and now my MS office will not work, is there a way to revert back my original software?

Back to Snow Leopard from Lion install method
Read and print out these instructions, your computer is going to be offline and you wil be cutoff from help until your machine is restored.
Clear the Desktop, Downloads and Trash of anything you wish to keep by placing their files in the respective Documents, Music, Pictures, Movie folders.
If you have a TimeMachine drive, update it and disconnect for the duration of this restore time. It will be your second backup system and will have to be wiped and setup again after successfully going back to Snow Leopard if it was connected to the OS X 10.7 boot drive. If it wasn't, then leave it disconnected without updating to Lion.
Backup ALL your Users folders (Documents, Pictures, Movies, Music etc) manually (drag and drop methods) to a (not TimeMachine) external powered drive (HFS+ journaled formatted in Disk Utility) and disconnect, your going to be wiping the entire disk of ALL DATA. (warning, everything will be gone and not recovered)
Here we go!
Hold c and boot off the 10.6 installer disk that comes with your computer and second screen in just STOP.
Look at the Utilities Menu for Disk Utility.
On the left is the name of your hard drive maker, click it and Erase (format HFS+ Journaled), give it the same name as before, and click Erase...
This should wipe the drive of ALL partitions (GUID, OS X and 10.7 Recovery, Windows if present)
When it's done, quit and install OS X 10.6. Then install all your programs from fresh sources and validate/update.
When you setup a first account, use the same user name as before, this way you can simply drag and drop the content of your previous Users folders from the external drive right back into the new Users folders and everything should work peachy. Links in iTunes to music, playlists and iPhoto links especially.
Update OS X to 10.6.8 using the Combo Update for best results.
http://support.apple.com/kb/DL1399
(Note: If your original machine had 10.5 and you want the free iLife that comes with the disks with the computer, then you'll have to install 10.5 first using the same c boot/erase/format methods as above, then update to 10.6 via the disk, then Combo Update 10.6.8)
Final step optional but highly receommended.
A lot of people use a Carbon Copy Clone of their boot drive to a HFS+Journaled external drive as a "hold the option key" bootable backup in case something goes wrong with their boot drive or need to restore to a previous OS X version.. (in addition to TimeMachine drive for more immediate backups.)
It's not advised to have a Bootable Clone and a TimeMachine partition on the same external drive, as two drives gives hardware protection in case one fails.

Beta games will not work at all.

When I download beta games into peazip or anotherzip file. they either throw components of the game all over my desktop or, if I put it in a new folder, just do not work. All regular games work fine using this method, just beta games will not work. I extract from zip file onto my desktop in new file, open the exe. in that file to a blank black page. Called HP, they could not help me! I am going crazy with this,as my computer is only a few months old! HELP!!! Thank you very much to anyone who knows how to fix this problem! God bless!

Terri, welcome to the forum.
When you say beta games, I want to make certain that I understand what you mean. Is this a developer (Beta) or games that are in the beta testing stage? If they are beta test games, it isn't surprising that you are having problems. Beta test games simply, in many cases, are not ready for prime time. The best way to handle them is by checking to see if there are patches available. It would be rare, but possibly the only way to get them to work properly.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Apple remote not working, is there a way to setup Apple TV without the remote

Apple remote not working, is there a way to setup Apple TV without the remote

Welcome to the Apple Community Sylvia.
There is no way to set up home sharing on the Apple TV without the original remote from Apple, you will need to purchase a new remote from the Apple Store.

Why the games are not working properly in my ipad after installing iOS7

Why games are not working properly in my ipad in my iOS 7

The games you mention would have been written and therefore designed for the previous version of iOS - you've most likely had a lot of updates lately in the run-up to the release of iOS 7 and if these games haven't had an update then chances are these will need to be adapted to iOS 7 by the developers if not working correctly.
Regards,
Steve

The music on my iPhone 4 with the new ios7 is not working. There are red dots next to the selections and I can not here any music when I touch the spots. I just downloaded the iOS 7. What went wrong? Everything else seems to be fine

The music on my iPhone 4 is not working. There are red dots next to the selections and no sound occurs when they are touched.

Can you play those songs in iTunes on your computer?
Make sure they are all part of your iTunes library before you sync and that they were bought with the same AppleID you use on your phone.

INSERTstatement is not working if there is a before insert trigger

INSERTstatement is not working if there is a before insert trigger on that table. That trigger contains an insert to another table which having the main table reference.
Let us say, for example there a table named 'EMP_DEPT' and there is a before insert trigger on this table.
In this trigger inserting a record in to another table named 'AUDIT_EMP' and in this table using EMP_Dept primary key as foreign key.
Table EMP_DEPT is having the below columns:
EMP_DEPT_SYS_ID
EMP_DEPT_NO
DEP_NAME etc..
Table AUDIT_EMP is having the below columns:
AUDIT_EMP_SYS_ID
EMP_DEPT_SYS_ID
AUDIT_NO etc..
the code in the trigger is
INSERT INTO audit_emp
(audit_emp_sys_id, emp_dept_sys_id, audit_no
VALUES (audit_emp.NEXTVAL, :new EMP_DEPT_SYS_ID, '1101'
Now when you execute the insert query like:
INSERT INTO emp_dept
(emp_dept_sys_id, emp_dept_no, dep_name
VALUES (EMP_DEPT.nextval, 1001, 'Dep-1'
It is giving the error saying 'Integrity constraint error, parent key not found' from the trigger.
But, when you modify the above insert query like the below then it is working.
INSERT INTO emp_dept
(emp_dept_sys_id, emp_dept_no, dep_name
SELECT EMP_DEPT.nextval, 1001, 'Dep-1'
FROM DUAL;
I am using Oracle 10g.
Why the insert into values is not working. Is there any commit transaction sequence change? Any idea please?
Edited by: user6475632 on Sep 16, 2009 7:08 AM

Obviously the code you posted can not work.
You are inserting the detail record (the audit record) before the master record, where it should have been after. IMO, you should fire the trigger AFTER INSERT for each row.
If that still doesn't work, you need to change the foreign key constraint into a deferred constraint, which is evaluated at commit, instead of immediately. The SQL reference manual has further info on this.
'Oracle 10g' is considered a marketing label here, not a -4 digit- version.
Sybrand Bakker
Senior Oracle DBA

I have downloaded an emule for mac, but it is not working. There is an amule, it works,but slow. Why

Can some one tell me if there is an easymule for mac. I have downloaded one, but it is not working. There is a amule, it works, but very slow.

Sniper Elite doesn't have a release for Macintosh as far as i know. It was only released on Windows and other gaming consoles, but not on Mac OS X.

I bought a new IPHONE from apple reseller and the earpiece is not working . There is no sound .Speaker and headfone are working but earpiece is not working . How can i get it replaced.

I bought a new IPHONE from apple reseller and the earpiece is not working.
There is no sound .Speaker and headfone are working but earpiece is not working.
How can i get it replaced.

You can get service information on this web page.
Regards.

Confirmation process in SRM does not work whenever there is a discrepancy

Hello,
we are on SRM 5.0 version with classic scenario(follow on documents in backed system - ECC 5.0). to procure maintainence service user cretes a shopping cart by selecting describe requirements method and UOM at times in incorrectly asssigned as EA so upon shopping cart approval a follow on ducument (purchase requistion) is created in ECC as per config set up(in SRM). Buyer while coverting this purchase requisition to PO rectifies this erroe and chages the UOM of meausre to Hr and send a PO to vendor.
we are not bale to use confirmation feature in SRM to perform receipt of this service. is this how system works? any configration or a BADI needs to be usd to allow to perform confirmation in SRM even tough there is discrepancy in shopping cart UOM and Purcahse requsition UOM.
when thre is change in UOM in ECC that Purchase
*Confirmation process in SRM does not work whenever there is a discrepancy (i.e. different UM )between Shoping cart and Purchase Requisition related to that Shoping cart.*
we donot use serive option in SRM and donnot MM service module in ECC.
any help on this will be much appreciated.
Thanks,
sairam

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

I updated to java 7 and now my yahoo games will not work, how do i fix this?

i updated to java 7 and now my yahoo games will not work, how do I fix this?

kathieaross,
click on the Java pane in System Preferences. When the Java Control Panel window opens, click on the Security tab, and set your Security Level to Medium — that will allow “untrusted” applications (i.e. those without certificates from a trusted authority) to run. Press the Apply button in the lower-right corner to confirm the change, then press the OK button to close the window.
Apparently your Yahoo! card games don’t have certificates associated with them, which is why the default security setting of Java SE 7 Update 51 didn’t allow them to run.

King com games do not work is there an answer why

Similar Messages

Maybe you are looking for