Knowledge articles full compilation failed

Hi,
We have CRM 7.0 Interaction center.
I executed the knowledge article full compilation by getting in to the IC_MANAGER business role.
In the middle of the full compilation, the job failed with the reason MEMORY_NO_MORE_PAGING.
Now basis corrected it and want to start again the full compilation.
But its still the status is showing as Full compilation is in progress and how to start again. pl suggest.
Regards
A.Sureshbabu.

Hi,
I am running into the same error during full index compilation.
Have you been able to resolve the issue ?
Thanks,

Similar Messages

  • Knowledge base full compilation error

    Hello.
    I have a problem during index compilation of CRM_OBJECT database for RU language. For EN languege indexes compiled successful. I'll tried clean indexes, logs and recompiled many times but it is all the same error ( "2 - First KBID: B1EEEC4CC6E26547E1000000AC10FC80 , STREX 002 Выбор счета GBB 0001 R515 не возможен Descr")
    Dmitry

    Hi,
    I am running into the same error during full index compilation.
    Have you been able to resolve the issue ?
    Thanks,

  • Compilation failed due to a Xilinx error

    I'm getting a "Compilation failed due to Xilinx error" trying to compile code in LabVIEW 2011.  This code runs on a FlexRIO (PXIe-7962R) with an adapter module (NI 5751).  The issue comes when using the IDELAY clip node to synchronize the start of collection between two flexrio/5751 pairs.  The error message mentions "internal_IDELAY_CLIP_DataOut) has DELAY_SRC set to either I or IO but IDATAIN is not driven by an IBUF".  When we faced this issue before it was solved by following the steps in the following knowledge base article:
    http://digital.ni.com/public.nsf/allkb/BBD7A87F2ADC2028862577FB005F6B19
    These patches only mention LabVIEW 2010 but since I'm using LabVIEW 2011 they don't apply.  Any suggestions on what is causing this issue?  I verified that if I remove this clip node it compiles successfully.
    Andy Brown
    Averna

    Hi Andy,
    As mentioned in the KB "this issue is caused by a bug in the Xilinx ISE compiler". It is not related to the version of LabVIEW, but it is related to the version of your compiler. Which version of Xilinx compiler are you using? (Check the contents of the C:\NIFPGA\programs folder). If you are still using the 11.5 version then you can still use the patch even if you are running LabVEW 2011.
    Sev K.
    Applications Engineering Specialist | CLA
    National Instruments

  • Unable to load Knowledge Article automaticaly

    Hello,
    We need to load several thousand Knowledge Articles in the system for the beginning of the project.
    It is impossible to use LSMW in a WebUI transaction so I tried to use LSMW with the old transaction u201CCMRD_ORDERu201D but there where major difficulties. KA created with this transaction cannot be seen in the WEBUI search (even manually).
    I tried to create a specific program to load a Knowledge Article in SAP GUI using CRM_ORDER_MAINTAIN.
    The created KA appears in CRM_ORDER_READ and in the transaction CRMD_ORDER.
    However, the same knowledge article ID when searched in WebUI is not seen.
    I have even tried to do SAF Compilation to see if it helps but the KA is still not visible in WebUI which is the main concern.
    Kindly Suggest.
    Stéphane

    Hi Stephanie,
    Thats a very valid and geniune question. We also had to upload Knowledge Articles in the CRM system when our client migrated from PeopleSoft CRM system to SAP CRM.
    Its known that Knowledge Article comes one One Order Frame Work and we can still use CRM_ORDER_MAINTAIN and CRM_ORDER_SAVE FMs to load the KAs into the system.
    However, we need to do some additional steps in order to make it appear in the UI search.
    First of all you need to make sure that SAP is configured and the Knowledge Article Indexing Job is set up. Indexing is a very important part which is required for the Knowledge Articles to work properly in UI.
    To Set Up, go to SPRO->CRM->Enterprise Intelligence-.>Software Agent Framework
    Second thing, while writing the data conversion program, be sure to include the following logic in your program to make the Knowledge Article appear in the UI search:
                CALL METHOD cl_crm_knowledge_article_util=>ka_change_kb_notif
                  EXPORTING
                    ir_entity         = lv_result_final
                    iv_compile_action = 'U'.
    This is the addtional piece of code which the system calls while specifically saving Knowledge Article in standard functionality so that it works fine in UI search.
    Hope it helps.
    Thanks
    Vishal

  • "LabVIEW FPGA: The compilation failed due to timing violations, but there is no path information because the timing violations are not of type PERIOD

    The compilation of my labview fpga vi fails with the error message "LabVIEW FPGA:  The compilation failed due to timing violations, but there is no path information because the timing violations are not of type PERIOD".
    In the 'final timing (place and route)' report, the requested frequencies are all below the maximum frequencies and the compilation error message is only displayed at the very end on the 'summary' page.
    I tried to optimize my labview fpga vi with pipelining, but had no success.
    Can anybody offer some advice on how to debug fpga code with this error? Is this really a timing error or something else?
    Software:
    Labview 2011, fpga 2011, xilinx tools 12.4 sp1
    Hardware:
    NI PXIe-1071 Chassis
    NI PXIe-8108 Embedded controller
    NI PXIe-7965R FPGA FlexRIO FPGA module
    NI 5761 250 MS/s 14 bit Analog input digitizer
    The Xilinx log of the compilation run is attached.
    Also, this issue was already discussed in this thread ~6 months ago, but no satisfying answer was offered so far...
    Thanks,
    Fabrizio
    Attachments:
    xilinxlogc.txt ‏2313 KB

    Hi Kyle,
    the problem is: I have one computer which compiles the VI successfully and a second one which shows that error. Both use the same software setup (LV2011SP1+RT+FPGA from DS2012-01). Both use the same project file - atleast SVN shows no difference.
    - You can have one FPGA VI where one computer is compiling successful and a second one complains. (Btw. I have a SRQ running in Germany on this topic.)
    - More problems: After successful compiling on first computer and transferring all to second computer (using SVN, including the full project folder with all files like bitfiles, lvproj, and everything) the second computer is unable to start the RT executable due to error "FPGA VI needs to recompile". Solution so far: Call the FPGA-OpenReference with the bitfile instead of the VI (as I used to do until now)...
    - More problems: After modifying the FPGA-OpenReference to use the bitfile (on the 2nd computer) and transferring all the files back to the 1st computer (using SVN as before, including the whole project) the 1st computer complains: FPGA-OpenReference is creating a different reference than is used in the VI. So what happens here? On one computer my VI is ok, the reference is typed correctly. Transferring all the files to a different computer the VI isn't ok anymore due to changes of the reference??? You know: all files are the same: lvproj, FPGA bitfile didn't change, cRIO reference didn't change...
    All those problems didn't occur on my RT-FPGA projects in LV2010SP1. I'm not pleased...
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Convert Problems/Solutions into Knowledge Articles

    Hi Experts,
    I am wroking on SAP CRM 7.0 SP06 and now we are planning to implement Knowledge Article functionality.
    I have done the all configuration settings and multilevel categorization, every thing working fine. Now I want to convert problems/solutions which already created in CRM and stored in SDB into knowledge article.
    Any one please guide me how can I convert existing problems/solutions into knowledge articles. Is there any report for this?
    Thanking you in anticipation.
    Regards,
    Babu.

    Hi Kevin,
    Well, I'm new on this and have only worked on CRM 6 & 7. I'll give you my advice regarding these CRM versions. I don't know if it is supported on CRM 5.
    IMG:
    CRM >> Enterprise Intelligence >> SAF >> Name and Configure KB
    You create and define you DB as you want: ACME INC
    CRM >> Enterprise Intelligence >> SAF >> Business Add-Ins >> BAdI: Knowledge Base
    Each knowledge base should have its own Add-In implementation. So you have to implement an Add-In based on Add-In definition CRM_SAF_KB_*: CRM_SAF_KB_ACME. You can follow IMG documentation.
    In my case, the add-in already existed, since Knowledge Article functionality is standard in 7.0. KB didn't exist, I don't know why. I just created it with the name assigned on the BAdI, compiled, and everything works fine now.
    Hope it helps.
    Regards.
    Pablo

  • Compilation failed due to a compile server error

    I was using LABView 8.0 with RT and FPGA module without problems.
    I updated windows on 2006 April 18th and now I cannot compile any FPGA VI. Even the older one I compiled with the same computer previously.
    When I take EXACTLY the same project to another computer, it compiles just fine and when I take the bitfile back, my corrupted system can run with the bitfile.
    I fear the problem is with windows. I reinstalled LABView TOTALLY and still have the same error when trying to compile.
    According to the knowledge base I checked the HKEY and it doesn't change anything.
    Here is the error message:
    Status : compilation failed due to a Compile Server error
    Error -61499 occured at nirviExtractVHDLHierarchy.vi when called from nirviBuildprjFile.vi
    Possible reason(s)
    LABView FPGA : An internal software error in ALBView FPGA Module has occured. Please contact NI support
    Details : Error 7 occured at Open File reading C : \ NIFPGA80\srvrtmp\localhost\Eight...name of the bitfile ...\scripts\toplevel_gen_synth_lvfpga.txt
    Note : I checked this folder, it doesn't exist, thus it has never been created like the previous. After April 18th, not any new folder has been created.
    Possible reasons : File moved or deleted, incorrect filepath,...
    NI-488 : Non-existent board
    Note : I have nor use none of this nowhere !
    Start  time - Stop time : 12 seconds

    In order to try and isolate the problem can you perform a few tests.
    1)  Set up a remote compile and use the machine that is not working as the client and the machine that is working as the server.
    1.a) You can configure the client machine to use another machine as the compile server by going to Tools>>FPGA Module Options...>>Configure Compile Settings and change the machine from 'localhost' to the machine that you want to act as the server.
    1.b) On the server machine open the Compile Server manually by going to the Windows Start Menu>>All Programs>>National Instruments>>LabVIEW 8.0>>LabVIEW FPGA Utilities>>Compile Server
    1.c) Try and compile the VI.  It should generate code on the client machine and send the generated code to the server.  Wehn the server receives the code it will compile it and return the bitfile when complete.
    2) Set up a remote compile and use the machine that is not working as the server and the machine that is working as the client.
    2.a) Follow the instructions in part 1, but switch the client and server machines.
    These tests should help us isolate if the problem is with the Compile Server, or the code generation.
    Regards,
    Joseph D.
    National Instruments

  • How to create index for knowledge article IN CRM 7.0

    Hi,
    I want to delete the index for Knowledge Article, create again and do the complete compilation.
    In webui, Iam able to delete the Index and do complete compilation  and Iam not sure how to create the index.
    can anyone pl guide
    Regards
    BABU

    Hi,
       Once u created a data source. go to respective application component which u have assigned ducring creatinon of DS in RSO2 and right click on it and use replicate metadata.
    a popup with options 1. as data source
                                   2. as 3.x data source will come u select 2 one here and go on.

  • Follow up Knowledge Article

    Hi all ,
    I want a follow up Knowledge article from ServiceRequest and i have done all the required copy control configuration. but still when i click " create follow up " in Service Request , i didnt find Knowledge article transaction in follow up.
    Thanks

    Hi Shikhar,
    Would you please explain me how you solved the issue.
    What was the reason why knowledge article was not found as a follw up from Service request?
    Thank you in advance.
    Regards
    Maddy

  • Knowledge Article in 7.1

    Hi,
    We have configured the service desk functionality in 7.1, and planning to extend the Knowledge Article functionality.We have few questions on this..
    How does "Suggest Knowledge Articles"  works?,what's the logic?
    Regards,
    Cherry

    Hi Luis,
    Yes, it can be publish for users, by defining the authorization scope.
    refer page number 4 knowledge management
    refer Working with Knowledge Articles - Master Data - SAP Library
    Thanks
    Jansi

  • Compilation failed while generating stub classes using wscompile

    I am new to Web Services. I am trying to generate client stub classes from WSDL (provided by Seapine's with TestTarckPro Software), using wscompile. I am using JWSDP 1.6
    ====================================================================================
    Here's the wscompile command,
    wscompile -gen:client -d classes2 -keep -s classes2 -verbose config.xml
    =========================================================================
    Here's config.xml file
    <configuration xmlns="http://java.sun.com/xml/ns/jax-rpc/ri/config">
    <wsdl
    location="./ttsoapcgi.wsdl"
    packageName="testtrack_interface"/>
    </configuration>
    =====================================================================================
    I am getting following compilation errors during stub generation. Following is the compilation error part of wscompile result output
    [SOAPObjectBuilderGenerator: writing object builder for: saveLink]
    [SerializerRegistryGenerator: creating serializer registry: testtrack_interface.Ttsoapcgi_SerializerRegistry]
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord.java:10: ';' expected
    protected java.lang.String m-strFileName;
    ^
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord.java:11: ';' expected
    protected java.lang.String m-strFixedRevision;
    ^
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord.java:12: ';' expected
    protected java.util.Calendar m-dateFixedTimestamp;
    ^
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord.java:17: ')' expected
    public CSCCFileRecord(long recordid, java.lang.String m-strFileName, java.lang.String m-strFixedRevision, java.util.
    Calendar m-dateFixedTimestamp) {
    ^
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord.java:47: ';' expected
    ^
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord_SOAPSerializer.java:29: ';' expected
    private static final int myM-STRFILENAME_INDEX = 1;
    ^
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord_SOAPSerializer.java:30: ';' expected
    private static final int myM-STRFIXEDREVISION_INDEX = 2;
    ^
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord_SOAPSerializer.java:31: ';' expected
    private static final int myM-DATEFIXEDTIMESTAMP_INDEX = 3;
    ^
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord_SOAPSerializer.java:71: not a statement
    instance.setM-strFileName((java.lang.String)member);
    ^
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord_SOAPSerializer.java:87: not a statement
    instance.setM-strFixedRevision((java.lang.String)member);
    ^
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord_SOAPSerializer.java:96: not a statement
    instance.setM-dateFixedTimestamp((java.util.Calendar)member);
    ^
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord_SOAPBuilder.java:18: ';' expected
    private static final int myM-STRFILENAME_INDEX = 1;
    ^
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord_SOAPBuilder.java:19: ';' expected
    private static final int myM-STRFIXEDREVISION_INDEX = 2;
    ^
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord_SOAPBuilder.java:20: ';' expected
    private static final int myM-DATEFIXEDTIMESTAMP_INDEX = 3;
    ^
    D:\TestTrackApi\classes2\testtrack_interface\CSCCFileRecord_SOAPBuilder.java:29: '(' expected
    public void setM-strFileName(java.lang.String mStrFileName) {
    ^
    15 errors
    error: compilation failed, errors should have been reported
    ==============================================================================
    My understanding is, while generating stubs, dashes or hyphens in variable names m-strFileName, m-strFixedRevision, m-dateFixedTimestamp are interpreted as minus sign and hence compilation is failing.
    I tried stub generation from same WSDL with Apache Axis and it's working fine. But stub generation is failing with JWSDP. Is this a problem with this WSDL file ? Am I missing something while using wscomplie command ?
    Please advise.
    Thanks
    Here's ttsoapcgi.wsdl file
    ==================================================================
    <?xml version="1.0" encoding="UTF-8"?>
    <definitions name="ttsoapcgi"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:SOAP="http://schemas.xmlsoap.org/wsdl/soap/"
    xmlns:WSDL="http://schemas.xmlsoap.org/wsdl/"
    targetNamespace="urn:testtrack-interface"
    xmlns:tns="urn:testtrack-interface"
    xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:ttns="urn:testtrack-interface">
    <types>
    <schema targetNamespace="urn:testtrack-interface"
    xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
    xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:ttns="urn:testtrack-interface"
    xmlns="http://www.w3.org/2001/XMLSchema"
    elementFormDefault="unqualified"
    attributeFormDefault="unqualified">
    <element name="CDatabase" type="ttns:CDatabase"/>
    <complexType name="CDatabase">
    <sequence>
    <element name="name" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    <complexType name="ArrayOfCDatabase">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="ttns:CDatabase" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="ttns:CDatabase[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <element name="CDatabaseTable" type="ttns:CDatabaseTable"/>
    <complexType name="CDatabaseTable">
    <sequence>
    <element name="name" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    <complexType name="ArrayOfCDatabaseTable">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="ttns:CDatabaseTable" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="ttns:CDatabaseTable[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <element name="CTableField" type="ttns:CTableField"/>
    <complexType name="CTableField">
    <sequence>
    <element name="name" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    <complexType name="ArrayOfCTableField">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="ttns:CTableField" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="ttns:CTableField[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <element name="CFieldValue" type="ttns:CFieldValue"/>
    <complexType name="CFieldValue">
    <sequence>
    <element name="value" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    <complexType name="ArrayOfCFieldValue">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="ttns:CFieldValue" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="ttns:CFieldValue[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <element name="CTableColumn" type="ttns:CTableColumn"/>
    <complexType name="CTableColumn">
    <sequence>
    <element name="name" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    <complexType name="ArrayOfCTableColumn">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="ttns:CTableColumn" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="ttns:CTableColumn[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <element name="CFilter" type="ttns:CFilter"/>
    <complexType name="CFilter">
    <sequence>
    <element name="name" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    <complexType name="ArrayOfCFilter">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="ttns:CFilter" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="ttns:CFilter[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <element name="CRecordData" type="ttns:CRecordData"/>
    <complexType name="CRecordData">
    <sequence>
    <element name="value" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    <complexType name="ArrayOfCRecordData">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="ttns:CRecordData" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="ttns:CRecordData[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <element name="CRecordRowSoap" type="ttns:CRecordRowSoap"/>
    <complexType name="CRecordRowSoap">
    <sequence>
    <element name="row" type="ttns:ArrayOfCRecordData" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    <complexType name="ArrayOfCRecordRowSoap">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="ttns:CRecordRowSoap" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="ttns:CRecordRowSoap[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <element name="CRecordListSoap" type="ttns:CRecordListSoap"/>
    <complexType name="CRecordListSoap">
    <sequence>
    <element name="columnlist" type="ttns:ArrayOfCTableColumn" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="records" type="ttns:ArrayOfCRecordRowSoap" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    <element name="CItemWithDBRecordId" type="ttns:CItemWithDBRecordId"/>
    <complexType name="CItemWithDBRecordId">
    <sequence>
    <element name="recordid" type="xsd:long" minOccurs="1" maxOccurs="1"/>
    </sequence>
    </complexType>
    <element name="CItemToTrack" type="ttns:CItemToTrack"/>
    <complexType name="CItemToTrack">
    <complexContent>
    <extension base="ttns:CItemWithDBRecordId">
    <sequence>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <element name="COrderedItemWithDBRecordId" type="ttns:COrderedItemWithDBRecordId"/>
    <complexType name="COrderedItemWithDBRecordId">
    <complexContent>
    <extension base="ttns:CItemWithDBRecordId">
    <sequence>
    <element name="order" type="xsd:long" minOccurs="1" maxOccurs="1"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <element name="CSystemBase" type="ttns:CSystemBase"/>
    <complexType name="CSystemBase">
    <complexContent>
    <extension base="ttns:CItemToTrack">
    <sequence>
    <element name="systemname" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <element name="CSystem" type="ttns:CSystem"/>
    <complexType name="CSystem">
    <complexContent>
    <extension base="ttns:CSystemBase">
    <sequence>
    <element name="location" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="computermodel" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="computerbrand" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="cputype" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="cpuspeed" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="harddisktype" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="harddisksize" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="ramsize" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="romsize" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="osname" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="osversion" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="videoname" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="hascdrom" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="cdrommodel" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="hasscanner" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="scannermodel" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="hasmodem" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="modemmodel" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="hasprinter" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="printermodel" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="otherhardware" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="hasmultiplemonitors" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <element name="CSCCFileRecord" type="ttns:CSCCFileRecord"/>
    <complexType name="CSCCFileRecord">
    <complexContent>
    <extension base="ttns:CItemWithDBRecordId">
    <sequence>
    <element name="m-strFileName" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="m-strFixedRevision" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="m-dateFixedTimestamp" type="xsd:dateTime" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <complexType name="ArrayOfCSCCFileRecord">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="ttns:CSCCFileRecord" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="ttns:CSCCFileRecord[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <element name="CFileAttachment" type="ttns:CFileAttachment"/>
    <complexType name="CFileAttachment">
    <sequence>
    <element name="m-pFileData" type="xsd:base64Binary" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="m-strFileName" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="m-strArchiveName" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    <complexType name="ArrayOfCFileAttachment">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="ttns:CFileAttachment" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="ttns:CFileAttachment[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <element name="CReportedByRecord" type="ttns:CReportedByRecord"/>
    <complexType name="CReportedByRecord">
    <complexContent>
    <extension base="ttns:CItemWithDBRecordId">
    <sequence>
    <element name="foundby" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="datefound" type="xsd:date" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="contactinfo" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="foundinversion" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="comments" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="reproduced" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="reproducedsteps" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="standardtestconfig" type="ttns:CSystem" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="otherhardwaresoftware" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="testconfigtype" type="xsd:short" minOccurs="1" maxOccurs="1"/>
    <element name="attachmentlist" type="ttns:ArrayOfCFileAttachment" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="showorder" type="xsd:short" minOccurs="1" maxOccurs="1"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <complexType name="ArrayOfCReportedByRecord">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="ttns:CReportedByRecord" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="ttns:CReportedByRecord[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <element name="CField" type="ttns:CField"/>
    <complexType name="CField">
    <complexContent>
    <extension base="ttns:CItemWithDBRecordId">
    <sequence>
    <element name="name" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <element name="CStringField" type="ttns:CStringField"/>
    <complexType name="CStringField">
    <complexContent>
    <extension base="ttns:CField">
    <sequence>
    <element name="value" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <element name="CIntegerField" type="ttns:CIntegerField"/>
    <complexType name="CIntegerField">
    <complexContent>
    <extension base="ttns:CField">
    <sequence>
    <element name="value" type="xsd:int" minOccurs="1" maxOccurs="1"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <element name="CDecimalField" type="ttns:CDecimalField"/>
    <complexType name="CDecimalField">
    <complexContent>
    <extension base="ttns:CField">
    <sequence>
    <element name="value" type="xsd:double" minOccurs="1" maxOccurs="1"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <element name="CBooleanField" type="ttns:CBooleanField"/>
    <complexType name="CBooleanField">
    <complexContent>
    <extension base="ttns:CField">
    <sequence>
    <element name="value" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <element name="CDateField" type="ttns:CDateField"/>
    <complexType name="CDateField">
    <complexContent>
    <extension base="ttns:CField">
    <sequence>
    <element name="value" type="xsd:date" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <element name="CDateTimeField" type="ttns:CDateTimeField"/>
    <complexType name="CDateTimeField">
    <complexContent>
    <extension base="ttns:CField">
    <sequence>
    <element name="value" type="xsd:dateTime" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <element name="CDropdownField" type="ttns:CDropdownField"/>
    <complexType name="CDropdownField">
    <complexContent>
    <extension base="ttns:CField">
    <sequence>
    <element name="value" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="dropdownValues" type="ttns:ArrayOfCFieldValue" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <element name="CVersionField" type="ttns:CVersionField"/>
    <complexType name="CVersionField">
    <complexContent>
    <extension base="ttns:CField">
    <sequence>
    <element name="value" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <complexType name="ArrayOfCField">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="ttns:CField" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="ttns:CField[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <complexType name="ArrayOfstring">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="xsd:string" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="xsd:string[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <element name="CDefectEvent" type="ttns:CDefectEvent"/>
    <complexType name="CDefectEvent">
    <complexContent>
    <extension base="ttns:CItemWithDBRecordId">
    <sequence>
    <element name="user" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="date" type="xsd:date" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="notes" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="eventaddorder" type="xsd:short" minOccurs="1" maxOccurs="1"/>
    <element name="name" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="parenteventid" type="xsd:long" minOccurs="1" maxOccurs="1"/>
    <element name="attachmentlist" type="ttns:ArrayOfCFileAttachment" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="fieldlist" type="ttns:ArrayOfCField" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="resultingstate" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="hours" type="xsd:double" minOccurs="1" maxOccurs="1"/>
    <element name="assigntolist" type="ttns:ArrayOfstring" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <complexType name="ArrayOfCDefectEvent">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="ttns:CDefectEvent" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="ttns:CDefectEvent[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <element name="CDefectEventDefinition" type="ttns:CDefectEventDefinition"/>
    <complexType name="CDefectEventDefinition">
    <sequence>
    <element name="name" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="user" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="datetime" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="notes" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="resultingState" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="resultingStateValues" type="ttns:ArrayOfCFieldValue" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="fileattachments" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="timeTracking" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="timeSumOfAll" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="timeHoursSinceLast" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="newAssignment" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="releaseNotes" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="customFields" type="ttns:ArrayOfCField" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    <complexType name="ArrayOfCDefectEventDefinition">
    <complexContent>
    <restriction base="SOAP-ENC:Array">
    <sequence>
    <element name="item" type="ttns:CDefectEventDefinition" minOccurs="0" maxOccurs="unbounded"/>
    </sequence>
    <attribute ref="SOAP-ENC:arrayType" WSDL:arrayType="ttns:CDefectEventDefinition[]"/>
    </restriction>
    </complexContent>
    </complexType>
    <element name="CDefect" type="ttns:CDefect"/>
    <complexType name="CDefect">
    <complexContent>
    <extension base="ttns:CItemToTrack">
    <sequence>
    <element name="defectnumber" type="xsd:long" minOccurs="1" maxOccurs="1"/>
    <element name="summary" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="state" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="disposition" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="type" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="priority" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="product" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="component" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="reference" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="severity" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="enteredby" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="dateentered" type="xsd:date" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="locationaddedfrom" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="datetimecreated" type="xsd:dateTime" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="datetimemodified" type="xsd:dateTime" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="createdbyuser" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="modifiedbyuser" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="actualhourstofix" type="xsd:double" minOccurs="1" maxOccurs="1"/>
    <element name="reportedbylist" type="ttns:ArrayOfCReportedByRecord" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="eventlist" type="ttns:ArrayOfCDefectEvent" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="pSCCFileList" type="ttns:ArrayOfCSCCFileRecord" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="customFieldList" type="ttns:ArrayOfCField" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <element name="CTask" type="ttns:CTask"/>
    <complexType name="CTask">
    <complexContent>
    <extension base="ttns:CItemToTrack">
    <sequence>
    <element name="status" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="priority" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="summary" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="description" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="datedue" type="xsd:date" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="dateassigned" type="xsd:date" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="versiondue" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="assignedto" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="assignedby" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="assigneddefect" type="xsd:long" minOccurs="1" maxOccurs="1"/>
    </sequence>
    </extension>
    </complexContent>
    </complexType>
    <element name="PhoneNumber" type="ttns:PhoneNumber"/>
    <complexType name="PhoneNumber">
    <sequence>
    <element name="numbertype" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="phonenumber" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    </sequence>
    </complexType>
    <element name="CUser" type="ttns:CUser"/>
    <complexType name="CUser">
    <complexContent>
    <extension base="ttns:CItemToTrack">
    <sequence>
    <element name="firstname" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="lastname" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="usergroupname" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="company" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="emailtype" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="emailaddress" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="isactive" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="iscustomer" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="isglobal" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="isactiveglobal" type="xsd:boolean" minOccurs="1" maxOccurs="1"/>
    <element name="userLicense" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="password" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="loginname" type="xsd:string" minOccurs="1" maxOccurs="1" nillable="true"/>
    <element name="phoneone" type="ttns:PhoneNumber" minOccurs="1" maxOccurs="1"/>
    <element name="phonetwo" type="ttns:PhoneNumber" m

    Deepank-
    When generating forms from Designer, Designer attaches libraries - like ofgmes.pll, ofgnavl.pll, etc. You will need to copy these libraries to the same directory where your forms reside on your Linux box. To find out what libraries ate attached to your form, open it on your windows PC after generating it from Designer and you will see the attached libraries. Also, watch out for the case-sensitivity of Linux. If you have the Designer libraries on your linux box and you still get errors, try changing the case of the names of the libraries.
    Hope this helps,
    Dan

  • Siebel 8.2 Vanilla SRF different from SRF with Full Get and Full Compile

    This has been an issue I've been banging my head on the wall against. Basically, I installed Siebel Public Sector 8.2 in Unix and did so without any problems. I created a Mobile Client, generated and extracted the Database and did a full get using Siebel Tools. I then did a full compile and obtained an SRF file (in my local Windows machine). I compared this SRF file with the existing SRF in the Unix Server and the two files are quite different. The full get + full compile SRF has 519 objects that are modified and new when compared to the server SRF.
    Now, here's the kicker. Remember this is a new installation of Siebel, when I use the Vanilla SRF file in the server, the Contact Income View works. Now when I overwrite this Vanilla SRF with the SRF I get by doing a full get + full compile, Siebel crashes when these runtime events happen. Drilldown to a contact (create one if there's none), go to the Income tab, then go to different screen (say Cases or Home). Siebel crashes and creates an FDR file. When I revert to the Vanilla SRF, everything is fine again.
    My question is, why are the two SRFs different from each other and why does the full get + full compile create a "malfunctioning" SRF?
    Any guidance with this issue will be highly appreciated.
    Bernhard

    The extract database job ran without any problems. Here are my parameters:
    Client Database encryption key: none
    Client Name: <mobile client name>
    Encrypt client Db password: false
    The Mobile client uses the Routing Model: MOBILE CLIENT - EXTRACT ONLY
    I also ran the extract database job using the following parameters:
    Client Database encryption key: none
    Client Name: <mobile client name>
    Encrypt client Db password: false
    Extract all Repositoryt Tables: true
    but it resulted in a failure when I did a full compile.

  • Unable to publish in Swf format. Get error message: 'Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name'. Anyone know how to fix?

    Unable to publish in Swf format. Get error message reads: 'Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name'. Anyone know how to fix?

    Hi There,
    Can you tell me the Operating System and Captivate version you are using?
    Also can you confirm if you are getting this issue will this one project or all the projects? Try to copy paste this project on a new blank project and then try to publish.
    Regards,
    Mayank

  • How to set up Knowledge article CRM on HANA

    Dear All,
    We are using HANA database as a primary database. I'm in process of configuring Knowledge management using the best practice C3G/C29.
    I did not get answers to below questions even after reading documentation on knowledge management and OSS notes(1254901,1517236,1703338,1730098,1770286,1773525,1777201,1789329,1789386,1792053,1816407,1817417).
    1. Is it necessary to Install TREX even though the database is HANA ?
    2. How to connect SAF(software agent framework) to HANA  , SAF uses TCP/IP RFC connections to TREX ?
    I have selected HANA database as search engine in below path.
    SAP NetWeaver system and launch the Implementation Guide (IMG) by using transaction SPRO. Navigate to the node  Search and Operational Analytics  Common Settings for Operational Analytics and Embedded Search  Configure Indexing  Define TREX/BWA Destination or SAP HANA Database Connection .
    As I'm using HANA database I can't use RFC destination of TREX TCP/IP connections and TREX was not installed.
    Please guide me how to set up knowledge article in CRM on HANA db.
    similar issue thread is unanswered since a year.
    How to Knowledge base set up in SAP CRM 7 EHP 3 using HANA
    Thanks,
    Naveen.

    Hi there,
    Please update anyone has idea on above issue.

  • Compilation failed while executing: ADT

    I have a project that I've been successfully compiling for iOS in Flash Professional 5.5, with uses AIR 2.6. I decided to try compiling in Flash Builder 4.6 using AIR 3.1. It runs fine on the desktop, no errors or warnings. When I try to do an Ad Hoc release build, it fails with java.lang.NullPointerException at java.util.TreeMap.getEntry(TreeMap.java:324), (The Export Release Build dialog does not let me select the text, otherwise I'd paste the stack here)starting at com.adobe.air.ipa.BitcodeGenerator.main(BitcodeGenerator.java:82) and saying  "Compilation failed while executing: ADT"
    Any suggestions would be appreciated!
    Regards,
    John

    Hi John,
    Could you please try packaging it on command line using ADT (available @ C:\Program Files\Adobe\Adobe Flash Builder 4.x\sdks\4.x\bin)
    # adt -package -target ipa-ad-hoc -provisioning-profile <path to mobileprovision> -storetype pkcs12 -keystore <path to p12> -storepass <password> hellworld.ipa hellworld-app.xml hellworld.swf
    Is it specific to ipa-ad-hoc target only? Could you try it with other targets like ipa-app-store or ipa-test-interpreter
    Please share the adt version by executing following command.
    # adt -version
    -Thanks
    Pahup

Maybe you are looking for