Kosher DNS, Stuck Name

So far getting the correct names to stick in our corporate DNS with xServes has been great. The majority of my xServes have a pretty standard domain name: servername.company.com.
However, I have one machine in particular that passes the changeip test, and all the fields that I believe need to be filled out with the computer name are correct, however I keep getting this message in my logs:
Feb 29 09:58:07 servername servermgrd: servermgr_dns: gethostbyaddr() and reverse DNS name do not match (old-server-name != servername.company.com), various services may not function properly - use changeip to repair and/or correct DNS
However, if I run changeip -checkhostname, I get:
Primary address = 10.130.244.51
Current HostName = servername.company.com
DNS HostName = servername.company.com
The names match. There is nothing to change.
When I go into the Server Admin utility and look at the network interface? It tells me the DNS name is:
old-server-name
My question is this - what other services can stick to a name? All of my other servers released their original install names when I corrected them in the Server settings and had our DNS guys re-check their entries. This is the only machine that is behaving like this. It's original name was "Old-Server-Name" but I am unable to get it to release this, even though the machine name in every field and even in the terminal is "servername".
I've looked through quite a few .conf files and can't seem to find where it might still be holding onto "Old-Server-Name".
Any suggestions?
Edit: I forgot to add, this is OS X Server 10.4.11, intel box, fairly new just like the rest of them.
Message was edited by: J_12

Hi
Switch off IPv6 and run changeip again. If its Standalone it should look like this:
sudo changeip - oldname newname oldIPaddress newIPaddress
The IP address bit will stay the same. You'll be prompted for the System Administrator name and password. I would also do a restart after doing this - maybe two for good luck - its funny how a restart seems to cure many ills?
If the server is an OD Master the command should look like this:
sudo changeip /LDAPv3/127.0.0.1 oldname newname oldIP newIP
In addition to providing the System Administrator name and password you will also need to provide the Directory Administrator name and password (diradmin).
Apologies if you know or have already done this.
Hope this helps, Tony

Similar Messages

  • DNS Domain name ISE 1.2

    Question:  Can the DNS domain name in ISE 1.2 be differnt from the AD domain that ISE is joined to?
    Situation:  I have an internal AD domain 'mydomain.local'.  Currently ISE is setup with mydomain.local as it's dns domain it's FQDN is isebox.mydomain.local, it is also joined to that domain.  The problem comes with the certificate for HTTPS sites (management, guest, etc...) specifically guest.  If I use a certificate for isebox.mydomain.local, guest users (that do not have our internal ca) will get a certificate error.  The certificate used for HTTPS sites in ISE has to match the hostname of ISE.  This seems to me to be an unresolvable problem.  I have to have mydomain.local as the DNS domain, so that I can join ISE to mydomain.local.  But if I use that domain then I can't issue a public cert for the ISE box, because I can't get a public cert for a .local domain.
    My idea was to define the DNS domain as a public domain (abc123.com) but still join it to my internal domain (mydomain.local).  I have found some vauge references to this not being a supported configuration, and even that it doesn't work at all.  Could someone please tell me if this works?  Or better yet, some better/easer way to solve this prolem.
    Thanks!

    Hello John
    Cisco ISE supports integration with a single Active Directory identity source. Cisco ISE uses this Active Directory identity source to join itself to an Active Directory domain. If this Active Directory source has a multidomain forest, trust relationships must exist between its domain and the other domains in order for Cisco ISE to retrieve information from all domains within the forest.
    However, you may create multiple instances for LDAP. Cisco ISE can communicate via LDAP to Active Directory servers in an untrusted domain. The only limitation you would see with LDAP being a database that it doesn't support PEAP MSCHAPv2 ( native microsoft supplicant). However it does suppport EAP-TLS.
    For more information you may go through the below listed link
    http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns742/ns744/docs/howto_45_multiple_active_directories.pdf

  • DNS Host name problem

    Hi, I am a newbie to AS. Nice to join the family and meet u all.
    I got some problem during installation of AS 2005Q2, when I install and select 'Config Now' option, I cannot pass since the DNS hostname always fail.
    If I select 'Config Later', I will find something is missing, like asadmin tool is not avaiable.
    Since I will use the Ip only, can I disable or bypass the DNS host name? since no matter how I enter it always fail.
    Please advise, thank you very much in advance. :)

    Hi, I am a newbie to AS. Nice to join the family and meet u all.
    I got some problem during installation of AS 2005Q2, when I install and select 'Config Now' option, I cannot pass since the DNS hostname always fail.
    If I select 'Config Later', I will find something is missing, like asadmin tool is not avaiable.
    Since I will use the Ip only, can I disable or bypass the DNS host name? since no matter how I enter it always fail.
    Please advise, thank you very much in advance. :)

  • TREX Patch Installation ERROR - DNS Domain Name

    Dear all,
    I have been facing a problem with a TREX Installation and I would like to request your help.
    After successfully installing a portal (EP 7)  and a TREX instance (7.00), I encountered the following error
    while trying to install the TREX patch.
    The Error that pops-up is the following:
    "unknown message ID (osmod.hosts.getHostByAddress2) with parameter(s): -84.-230.-250.114".
    This error appears when the installation reaches the 'DNS Domain Name' step.
    The installation cannot procceed without resolving this issue.
    I have been trying to install patch 49, which I have successfully installed in other TREX instances so there
    should be no error with the binaries.
    Has anyone come across a similar situation?
    I would appreciate your input on the matter
    Thanks in advance,
    Kontogianni Eleni
    Edited by: Eleni Kontoyanni on May 20, 2011 2:36 PM

    Dear Eleni,
    The issues that I have encountered where unrelated, otherwise I would have mentioned them for you as a clue
    But what I was trying to say is that although sometimes prerequisites look OK there can be a bug or exception in the SAP coding that might cause this. Examples of these non-related issues are:
    -  https://service.sap.com/sap/support/notes/1114042
    and
    - when using the KM Portal Drive with a description that is "to long" connection is suddenly not possible.
    I therefore advise you to open an OSS message @ SAP Support.
    Cheers,
    Benjamin

  • SAP NetWeaver DNS Domain Name System for SAP?

    Hi all,
    I need to install SAP Netweaver 7:01 SR1 ABAP Trial Version.
    I use Microsoft Windows XP.
    During the installation process asks the DNS Domain Name System for SAP.
    What should I put in this field?
    Following is the result of ipconfig:
    Ethernet adapter Local Area Connection 2:
    Connection-specific DNS Suffix....:
    IP Address.....................................: 10.10.0.10
    Subnet Mask..................................: 255.255.255.0
    Default Gateway...........................:
    The name of my machine is solaris.
    In the host file put the following:
    10.10.0.10 solaris
    I very much appreciate if someone can help me.
    Viviane

    Hi Viviane,
    Please check this thread:
    Error:Reverse lookup of address failed:(NW7.01ABAPTrailVersionInstallation)
    http://en.wikipedia.org/wiki/Domain_name_system
    Hope it helps.
    Regards,
    Arun

  • DNS Domain Name for SAP System

    Hi,
    I am installing BI7.1 , it is asking for DNS Domain Name for SAP System.
    What to give i dont know please some one help
    Thanks,
    Jack

    Hi,
    Pls chk this link;
    http://en.wikipedia.org/wiki/Domain_name_system
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
    Regards
    CSM Reddy

  • Dns domain name change

    I have just change the DNS domain name of my ISE from CLI and restarted the appliance (its a 3395 appliance)
    However,, when i log in via GUI it doesnt reflect the new dns name.
    Any ideas please?

    let's see my task as follows;
    1.change ip domain-name =xxx
    2.ISE will ask you to restart app service then answer yes
    3. i make "write memory"
    4. i reload the ise
    you choose check the dns name in forward zone and reverse zone too.
    These are what i do if i require to change ise information
    Sent from Cisco Technical Support Android App

  • Drive Map GPO and Item-Level targeting using DNS Computer Name not working as expected

    I've run into a snag trying to move from logon script based drive mappings, to a GPO based Drive map solution and I'm hoping somebody can shed some light on the problem that I am seeing.  We started down the GPO based drive mappings because we have
    a handful of Windows 8 client computers which don't run the logon script based drive mappings.
    I put together a basic Drive Maps GPO.   I'm mapping 3 drives, I've linked the GPO to a computer container OU for testing and everything is working just fine.  I have 3 different Windows 8 client PC, all domain joined, and all 3 run the GPO as
    expected.
    The problem is when I attempt to apply Item-level targeting.   I've found that if I define item-level targeting to use the NetBIOS name of the computer, I can either apply the GPO at an individual computer level, or I can exclude the GPO for that individual
    computer by toggling between IS and IS NOT.   However, when I choose to define the computer name by choosing the DNS option, the GPO does not apply as expected.
    So, if I say "the DNS computer name is example1.mydomain.com" and I apply the GPO, it applies to example1, example2 and example3.   And if I instead say, "the DNS computer name is not example1.mydomain.com", then it doesn't apply
    to example1, example2 or example3.     Obviously, I would expect it to apply or not apply only to example1.mydomain.com.
    If instead, I say "the NetBIOS computer name is example1", and apply the GPO, then example1 gets it, and example2 and example3 do not.   If I say, "the netBIOS name is not example 1", then example1 does NOT get the drive mapping,
    but example 2 and example3 do.   < This is exactly what I want and I can continue to just use NetBIOS names...but I don't understand why DNS isn't working in the same manner.
    My clients are all using DHCP and using domain controllers for DNS.   All 3 machines are in the mydomain.com namespace.  The mydomain.com namespace is an active directory integrated zone.   We have reverse zones in place for the dns records.
     I can ping the machines from the DC's as well as the machines themselves.  I can run nslookup and resolve the computer name for each host using the FQDN.  I can also run a ping -a IP_ADDY and get the FQDN back.  The DC's themselves are
    running Server 2008 R2.   I honestly don't see any issues from a name resolution standpoint on the network itself.   
    So, any suggestions as to why defining the shortened NetBIOS name works just fine, but using DNS with a FQDN does not?   (I've tried the DNS name using just the name, the name., as well as name.mydomain.com and name.mydomain.com.)

    And here is the result from a Windows 7 host,  which is named d2-7-user1...thus it should map the T drive and in fact does;
    2013-04-19 15:34:43.691 [pid=0x3e0,tid=0x120c] Entering ProcessGroupPolicyExDrives()
    2013-04-19 15:34:43.691 [pid=0x3e0,tid=0x120c] SOFTWARE\Policies\Microsoft\Windows\Group Policy\{5794DAFD-BE60-433f-88A2-1A31939AC01F}
    2013-04-19 15:34:43.691 [pid=0x3e0,tid=0x120c] BackgroundPriorityLevel ( 0 )
    2013-04-19 15:34:43.691 [pid=0x3e0,tid=0x120c] DisableRSoP ( 0 )
    2013-04-19 15:34:43.691 [pid=0x3e0,tid=0x120c] LogLevel ( 3 )
    2013-04-19 15:34:43.691 [pid=0x3e0,tid=0x120c] Command subsystem initialized. [SUCCEEDED(S_FALSE)]
    2013-04-19 15:34:43.706 [pid=0x3e0,tid=0x120c] Set user security context.
    2013-04-19 15:34:43.706 [pid=0x3e0,tid=0x120c] Set system security context.
    2013-04-19 15:34:43.706 [pid=0x3e0,tid=0x120c] User impersonation initialized.
    2013-04-19 15:34:43.706 [pid=0x3e0,tid=0x120c] Client context subsystem initialized.
    2013-04-19 15:34:43.706 [pid=0x3e0,tid=0x120c] Configuration subsystem initialized.
    2013-04-19 15:34:43.706 [pid=0x3e0,tid=0x120c] Licensing subsystem initialized.
    2013-04-19 15:34:43.706 [pid=0x3e0,tid=0x120c] Set user security context.
    2013-04-19 15:34:43.706 [pid=0x3e0,tid=0x120c] User information initialized.
    2013-04-19 15:34:43.722 [pid=0x3e0,tid=0x120c] Variable %ComSpec% = "C:\Windows\system32\cmd.exe"
    2013-04-19 15:34:43.722 [pid=0x3e0,tid=0x120c] Variable %FP_NO_HOST_CHECK% = "NO"
    2013-04-19 15:34:43.722 [pid=0x3e0,tid=0x120c] Variable %OS% = "Windows_NT"
    2013-04-19 15:34:43.722 [pid=0x3e0,tid=0x120c] Variable %Path% = "C:\Program Files (x86)\VMware\VMware vSphere CLI\Perl\site\bin;C:\Program Files (x86)\VMware\VMware vSphere CLI\Perl\bin;C:\Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS
    Client\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x86;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x64;C:\Program Files\Intel\Intel(R) Management Engine
    Components\DAL;C:\Program Files\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\IPT"
    2013-04-19 15:34:43.722 [pid=0x3e0,tid=0x120c] Variable %PATHEXT% = ".COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC"
    2013-04-19 15:34:43.722 [pid=0x3e0,tid=0x120c] Variable %PROCESSOR_ARCHITECTURE% = "AMD64"
    2013-04-19 15:34:43.722 [pid=0x3e0,tid=0x120c] Variable %TEMP% = "C:\Users\user1\AppData\Local\Temp"
    2013-04-19 15:34:43.722 [pid=0x3e0,tid=0x120c] Variable %TMP% = "C:\Users\user1\AppData\Local\Temp"
    2013-04-19 15:34:43.722 [pid=0x3e0,tid=0x120c] Variable %USERNAME% = "user1"
    2013-04-19 15:34:43.722 [pid=0x3e0,tid=0x120c] Variable %windir% = "C:\Windows"
    2013-04-19 15:34:43.722 [pid=0x3e0,tid=0x120c] Variable %PSModulePath% = "C:\Windows\system32\WindowsPowerShell\v1.0\Modules\"
    2013-04-19 15:34:43.722 [pid=0x3e0,tid=0x120c] Variable %NUMBER_OF_PROCESSORS% = "8"
    2013-04-19 15:34:43.722 [pid=0x3e0,tid=0x120c] Variable %PROCESSOR_LEVEL% = "6"
    2013-04-19 15:34:43.737 [pid=0x3e0,tid=0x120c] Variable %PROCESSOR_IDENTIFIER% = "Intel64 Family 6 Model 58 Stepping 9, GenuineIntel"
    2013-04-19 15:34:43.737 [pid=0x3e0,tid=0x120c] Variable %PROCESSOR_REVISION% = "3a09"
    2013-04-19 15:34:43.737 [pid=0x3e0,tid=0x120c] Variable %windows_tracing_logfile% = "C:\BVTBin\Tests\installpackage\csilogfile.log"
    2013-04-19 15:34:43.737 [pid=0x3e0,tid=0x120c] Variable %windows_tracing_flags% = "3"
    2013-04-19 15:34:43.737 [pid=0x3e0,tid=0x120c] Variable %ALLUSERSPROFILE% = "C:\ProgramData"
    2013-04-19 15:34:43.737 [pid=0x3e0,tid=0x120c] Variable %APPDATA% = "C:\Users\user1\AppData\Roaming"
    2013-04-19 15:34:43.737 [pid=0x3e0,tid=0x120c] Variable %CommonProgramFiles% = "C:\Program Files\Common Files"
    2013-04-19 15:34:43.737 [pid=0x3e0,tid=0x120c] Variable %CommonProgramFiles(x86)% = "C:\Program Files (x86)\Common Files"
    2013-04-19 15:34:43.737 [pid=0x3e0,tid=0x120c] Variable %CommonProgramW6432% = "C:\Program Files\Common Files"
    2013-04-19 15:34:43.737 [pid=0x3e0,tid=0x120c] Variable %COMPUTERNAME% = "D2-7-user1"
    2013-04-19 15:34:43.737 [pid=0x3e0,tid=0x120c] Variable %HOMEDRIVE% = "C:"
    2013-04-19 15:34:43.737 [pid=0x3e0,tid=0x120c] Variable %HOMEPATH% = "\Users\user1"
    2013-04-19 15:34:43.753 [pid=0x3e0,tid=0x120c] Variable %LOCALAPPDATA% = "C:\Users\user1\AppData\Local"
    2013-04-19 15:34:43.753 [pid=0x3e0,tid=0x120c] Variable %LOGONSERVER% = "\\VM-EXAMPLE-DC05"
    2013-04-19 15:34:43.753 [pid=0x3e0,tid=0x120c] Variable %ProgramData% = "C:\ProgramData"
    2013-04-19 15:34:43.753 [pid=0x3e0,tid=0x120c] Variable %ProgramFiles% = "C:\Program Files"
    2013-04-19 15:34:43.753 [pid=0x3e0,tid=0x120c] Variable %ProgramFiles(x86)% = "C:\Program Files (x86)"
    2013-04-19 15:34:43.753 [pid=0x3e0,tid=0x120c] Variable %ProgramW6432% = "C:\Program Files"
    2013-04-19 15:34:43.753 [pid=0x3e0,tid=0x120c] Variable %PUBLIC% = "C:\Users\Public"
    2013-04-19 15:34:43.753 [pid=0x3e0,tid=0x120c] Variable %SystemDrive% = "C:"
    2013-04-19 15:34:43.753 [pid=0x3e0,tid=0x120c] Variable %SystemRoot% = "C:\Windows"
    2013-04-19 15:34:43.753 [pid=0x3e0,tid=0x120c] Variable %USERDNSDOMAIN% = "mydomain.com.au"
    2013-04-19 15:34:43.753 [pid=0x3e0,tid=0x120c] Variable %USERDOMAIN% = "mydomain"
    2013-04-19 15:34:43.769 [pid=0x3e0,tid=0x120c] Variable %USERPROFILE% = "C:\Users\user1"
    2013-04-19 15:34:43.769 [pid=0x3e0,tid=0x120c] Variable %LogonUser% = "user1"
    2013-04-19 15:34:43.769 [pid=0x3e0,tid=0x120c] Variable %LogonDomain% = "mydomain"
    2013-04-19 15:34:43.769 [pid=0x3e0,tid=0x120c] Variable %LogonUserSid% = "S-1-5-21-976655598-962914793-294660928-7222"
    2013-04-19 15:34:43.769 [pid=0x3e0,tid=0x120c] Variable %BinaryUserSid% = "00001C3611902B403964E9E93A3694EE000000150500000000000501"
    2013-04-19 15:34:43.769 [pid=0x3e0,tid=0x120c] Variable %LdapUserSid% = "\01\05\00\00\00\00\00\05\15\00\00\00\EE\94\36\3A\E9\E9\64\39\40\2B\90\11\36\1C\00\00"
    2013-04-19 15:34:43.769 [pid=0x3e0,tid=0x120c] Variable %ReversedUserSid% = "010500000000000515000000EE94363AE9E96439402B9011361C0000"
    2013-04-19 15:34:43.769 [pid=0x3e0,tid=0x120c] Variable %BinaryComputerSid% = "000040EC11902B403964E9E93A3694EE000000150500000000000501"
    2013-04-19 15:34:43.769 [pid=0x3e0,tid=0x120c] Variable %ReversedComputerSid% = "010500000000000515000000EE94363AE9E96439402B9011EC400000"
    2013-04-19 15:34:43.784 [pid=0x3e0,tid=0x120c] Variable %LdapComputerSid% = "\01\05\00\00\00\00\00\05\15\00\00\00\EE\94\36\3A\E9\E9\64\39\40\2B\90\11\EC\40\00\00"
    2013-04-19 15:34:43.784 [pid=0x3e0,tid=0x120c] Variable %OsVersion% = "Windows 7"
    2013-04-19 15:34:43.784 [pid=0x3e0,tid=0x120c] Variable %LocalTimeEx% = "2013-04-19 15:34:43.706"
    2013-04-19 15:34:43.784 [pid=0x3e0,tid=0x120c] Variable %LocalTime% = "2013-04-19 15:34:43"
    2013-04-19 15:34:43.784 [pid=0x3e0,tid=0x120c] Variable %LocalTimeXmlEx% = "2013-04-19T15:34:43.706"
    2013-04-19 15:34:43.784 [pid=0x3e0,tid=0x120c] Variable %LocalTimeXml% = "2013-04-19T15:34:43"
    2013-04-19 15:34:43.784 [pid=0x3e0,tid=0x120c] Variable %DateTimeEx% = "2013-04-19 19:34:43.706"
    2013-04-19 15:34:43.784 [pid=0x3e0,tid=0x120c] Variable %DateTime% = "2013-04-19 19:34:43"
    2013-04-19 15:34:43.784 [pid=0x3e0,tid=0x120c] Variable %MacAddress% = "cc-f7-20-52-41-53"
    2013-04-19 15:34:43.784 [pid=0x3e0,tid=0x120c] Variable %TempDir% = "C:\Users\user1\AppData\Local\Temp"
    2013-04-19 15:34:43.800 [pid=0x3e0,tid=0x120c] Variable %WindowsDir% = "C:\Windows"
    2013-04-19 15:34:43.800 [pid=0x3e0,tid=0x120c] Variable %SystemDir% = "C:\Windows\system32"
    2013-04-19 15:34:43.800 [pid=0x3e0,tid=0x120c] Variable %DomainName% = "mydomain"
    2013-04-19 15:34:43.800 [pid=0x3e0,tid=0x120c] Variable %ProgramFilesDir% = "C:\Program Files"
    2013-04-19 15:34:43.800 [pid=0x3e0,tid=0x120c] Variable %AppDataDir% = "C:\Users\user1\AppData\Roaming"
    2013-04-19 15:34:43.800 [pid=0x3e0,tid=0x120c] Variable %DesktopDir% = "C:\Users\user1\Desktop"
    2013-04-19 15:34:43.800 [pid=0x3e0,tid=0x120c] Variable %StartMenuDir% = "C:\Users\user1\AppData\Roaming\Microsoft\Windows\Start Menu"
    2013-04-19 15:34:43.800 [pid=0x3e0,tid=0x120c] Variable %ProgramsDir% = "C:\Users\user1\AppData\Roaming\Microsoft\Windows\Start Menu\Programs"
    2013-04-19 15:34:43.800 [pid=0x3e0,tid=0x120c] Variable %StartUpDir% = "C:\Users\user1\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup"
    2013-04-19 15:34:43.800 [pid=0x3e0,tid=0x120c] Variable %FavoritesDir% = "C:\Users\user1\Favorites"
    2013-04-19 15:34:43.815 [pid=0x3e0,tid=0x120c] Variable %SendToDir% = "C:\Users\user1\AppData\Roaming\Microsoft\Windows\SendTo"
    2013-04-19 15:34:43.815 [pid=0x3e0,tid=0x120c] Variable %RecentDocumentsDir% = "C:\Users\user1\AppData\Roaming\Microsoft\Windows\Recent"
    2013-04-19 15:34:43.815 [pid=0x3e0,tid=0x120c] Variable %NetPlacesDir% = "C:\Users\user1\AppData\Roaming\Microsoft\Windows\Network Shortcuts"
    2013-04-19 15:34:43.815 [pid=0x3e0,tid=0x120c] Variable %CommonAppdataDir% = "C:\ProgramData"
    2013-04-19 15:34:43.815 [pid=0x3e0,tid=0x120c] Variable %CommonDesktopDir% = "C:\Users\Public\Desktop"
    2013-04-19 15:34:43.815 [pid=0x3e0,tid=0x120c] Variable %CommonStartMenuDir% = "C:\ProgramData\Microsoft\Windows\Start Menu"
    2013-04-19 15:34:43.815 [pid=0x3e0,tid=0x120c] Variable %CommonProgramsDir% = "C:\ProgramData\Microsoft\Windows\Start Menu\Programs"
    2013-04-19 15:34:43.815 [pid=0x3e0,tid=0x120c] Variable %CommonStartUpDir% = "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup"
    2013-04-19 15:34:43.815 [pid=0x3e0,tid=0x120c] Variable %CommonFavoritesDir% = "C:\Users\user1\Favorites"
    2013-04-19 15:34:43.831 [pid=0x3e0,tid=0x120c] Variable %CurrentProcessId% = "992"
    2013-04-19 15:34:43.831 [pid=0x3e0,tid=0x120c] Variable %CurrentThreadId% = "4620"
    2013-04-19 15:34:43.831 [pid=0x3e0,tid=0x120c] Variable %GroupPolicyVersion% = "6.1.7601.17514"
    2013-04-19 15:34:43.831 [pid=0x3e0,tid=0x120c] Variable %TraceFile% = "C:\ProgramData\GroupPolicy\Preference\Trace\User.log"
    2013-04-19 15:34:43.831 [pid=0x3e0,tid=0x120c] Variable %LastError% = "0x00000000"
    2013-04-19 15:34:43.831 [pid=0x3e0,tid=0x120c] Variable %LastErrorText% = "The operation completed successfully."
    2013-04-19 15:34:43.831 [pid=0x3e0,tid=0x120c] Variables subsystem initialized.
    2013-04-19 15:34:43.831 [pid=0x3e0,tid=0x120c] Set system security context.
    2013-04-19 15:34:43.831 [pid=0x3e0,tid=0x120c] ----- Parameters
    2013-04-19 15:34:43.847 [pid=0x3e0,tid=0x120c] CSE GUID : {5794DAFD-BE60-433f-88A2-1A31939AC01F}
    2013-04-19 15:34:43.847 [pid=0x3e0,tid=0x120c] Flags : (   ) GPO_INFO_FLAG_MACHINE - Apply machine policy rather than user policy
    2013-04-19 15:34:43.847 [pid=0x3e0,tid=0x120c]         (   ) GPO_INFO_FLAG_BACKGROUND - Background refresh of policy (ok to do slow stuff)
    2013-04-19 15:34:43.847 [pid=0x3e0,tid=0x120c]         (   ) GPO_INFO_FLAG_SLOWLINK - Policy is being applied across a slow link
    2013-04-19 15:34:43.847 [pid=0x3e0,tid=0x120c]         (   ) GPO_INFO_FLAG_VERBOSE - Verbose output to the eventlog
    2013-04-19 15:34:43.847 [pid=0x3e0,tid=0x120c]         (   ) GPO_INFO_FLAG_NOCHANGES - No changes were detected to the Group Policy Objects
    2013-04-19 15:34:43.847 [pid=0x3e0,tid=0x120c]         (   ) GPO_INFO_FLAG_LINKTRANSITION - A change in link speed was detected between previous policy application and current policy application
    2013-04-19 15:34:43.847 [pid=0x3e0,tid=0x120c]         (   ) GPO_INFO_FLAG_LOGRSOP_TRANSITION - A change in RSoP logging was detected between the application of the previous policy and the application of the
    current policy.
    2013-04-19 15:34:43.847 [pid=0x3e0,tid=0x120c]         (   ) GPO_INFO_FLAG_FORCED_REFRESH - Forced Refresh is being applied. redo policies.
    2013-04-19 15:34:43.862 [pid=0x3e0,tid=0x120c]         (   ) GPO_INFO_FLAG_SAFEMODE_BOOT - windows safe mode boot flag
    2013-04-19 15:34:43.862 [pid=0x3e0,tid=0x120c]         (   ) GPO_INFO_FLAG_ASYNC_FOREGROUND - Asynchronous foreground refresh of policy
    2013-04-19 15:34:43.862 [pid=0x3e0,tid=0x120c] Token (computer or user SID): S-1-5-21-976655598-962914793-294660928-7222
    2013-04-19 15:34:43.862 [pid=0x3e0,tid=0x120c] Abort Flag : Yes (0x02b54a60)
    2013-04-19 15:34:43.862 [pid=0x3e0,tid=0x120c] HKey Root : Yes (0x0000163c)
    2013-04-19 15:34:43.862 [pid=0x3e0,tid=0x120c] Deleted GPO List : No
    2013-04-19 15:34:43.862 [pid=0x3e0,tid=0x120c] Changed GPO List : Yes
    2013-04-19 15:34:43.862 [pid=0x3e0,tid=0x120c] Asynchronous Processing : Yes
    2013-04-19 15:34:43.878 [pid=0x3e0,tid=0x120c] Status Callback : Yes (0xfae525b0)
    2013-04-19 15:34:43.878 [pid=0x3e0,tid=0x120c] WMI namespace : Yes (0x03c96fa0)
    2013-04-19 15:34:43.878 [pid=0x3e0,tid=0x120c] RSoP Status : Yes (0x057ae838)
    2013-04-19 15:34:43.878 [pid=0x3e0,tid=0x120c] Planning Mode Site : (none)
    2013-04-19 15:34:43.878 [pid=0x3e0,tid=0x120c] Computer Target : No (0x00000000)
    2013-04-19 15:34:43.878 [pid=0x3e0,tid=0x120c] User Target : No (0x00000000)
    2013-04-19 15:34:43.878 [pid=0x3e0,tid=0x120c] Calculated session relevance.
    2013-04-19 15:34:43.878 [pid=0x3e0,tid=0x120c] Completed CSE pre-processing.
    2013-04-19 15:34:43.878 [pid=0x3e0,tid=0x120c] Calculated list relevance. [SUCCEEDED(S_FALSE)]
    2013-04-19 15:34:43.893 [pid=0x3e0,tid=0x120c] Deleted GPO list is not relevant to the CSE.
    2013-04-19 15:34:43.893 [pid=0x3e0,tid=0x120c] Calculated list relevance.
    2013-04-19 15:34:43.893 [pid=0x3e0,tid=0x120c] Planning mode not detected.
    2013-04-19 15:34:43.893 [pid=0x3e0,tid=0x120c] Processing changed list.
    2013-04-19 15:34:43.893 [pid=0x3e0,tid=0x120c] Processing user policy.
    2013-04-19 15:34:43.893 [pid=0x3e0,tid=0x120c] Got WMI namespace for logging mode.
    2013-04-19 15:34:43.893 [pid=0x3e0,tid=0x120c] Completed get GPO list.
    2013-04-19 15:34:43.893 [pid=0x3e0,tid=0x120c] Initialized internal RSoP storage.
    2013-04-19 15:34:43.909 [pid=0x3e0,tid=0x120c] Completed GPO list pre-processing.
    2013-04-19 15:34:43.909 [pid=0x3e0,tid=0x120c] ----- Changed - 0
    2013-04-19 15:34:43.909 [pid=0x3e0,tid=0x120c] Options : (   ) GPO_FLAG_DISABLE - This GPO is disabled.
    2013-04-19 15:34:43.909 [pid=0x3e0,tid=0x120c]           (   ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
    2013-04-19 15:34:43.909 [pid=0x3e0,tid=0x120c] Options (raw) : 0x00000000
    2013-04-19 15:34:43.909 [pid=0x3e0,tid=0x120c] Version : 10354846 (0x009e009e)
    2013-04-19 15:34:43.909 [pid=0x3e0,tid=0x120c] GPC : LDAP://CN=User,cn={14209C3C-8E16-4247-95C6-925260D86074},cn=policies,cn=system,DC=mydomain,DC=com,DC=au
    2013-04-19 15:34:43.909 [pid=0x3e0,tid=0x120c] GPT :
    \\mydomain.com.au\SysVol\mydomain.com.au\Policies\{14209C3C-8E16-4247-95C6-925260D86074}\User
    2013-04-19 15:34:43.925 [pid=0x3e0,tid=0x120c] GPO Display Name : US Drive Mapping
    2013-04-19 15:34:43.925 [pid=0x3e0,tid=0x120c] GPO Name : {14209C3C-8E16-4247-95C6-925260D86074}
    2013-04-19 15:34:43.925 [pid=0x3e0,tid=0x120c] GPO Link : (   ) GPLinkUnknown - No link information is available.
    2013-04-19 15:34:43.925 [pid=0x3e0,tid=0x120c]            (   ) GPLinkMachine - The GPO is linked to a computer (local or remote).
    2013-04-19 15:34:43.925 [pid=0x3e0,tid=0x120c]            (   ) GPLinkSite - The GPO is linked to a site.
    2013-04-19 15:34:43.925 [pid=0x3e0,tid=0x120c]            (   ) GPLinkDomain - The GPO is linked to a domain.
    2013-04-19 15:34:43.925 [pid=0x3e0,tid=0x120c]            ( X ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
    2013-04-19 15:34:43.925 [pid=0x3e0,tid=0x120c]            (   ) GP Link Error
    2013-04-19 15:34:43.925 [pid=0x3e0,tid=0x120c] lParam : 0x00000000
    2013-04-19 15:34:43.940 [pid=0x3e0,tid=0x120c] Prev GPO : No
    2013-04-19 15:34:43.940 [pid=0x3e0,tid=0x120c] Next GPO : No
    2013-04-19 15:34:43.940 [pid=0x3e0,tid=0x120c] Extensions : [{00000000-0000-0000-0000-000000000000}{2EA1A81B-48E5-45E9-8BB7-A6E3AC170006}][{5794DAFD-BE60-433F-88A2-1A31939AC01F}{2EA1A81B-48E5-45E9-8BB7-A6E3AC170006}]
    2013-04-19 15:34:43.940 [pid=0x3e0,tid=0x120c] lParam2 : 0x02a92248
    2013-04-19 15:34:43.940 [pid=0x3e0,tid=0x120c] Link : LDAP://OU=Windows8 Machines,OU=USA,DC=mydomain,DC=com,DC=au
    2013-04-19 15:34:43.940 [pid=0x3e0,tid=0x120c] Variable %GPHPATH% = "C:\ProgramData\Microsoft\Group Policy\History\{14209C3C-8E16-4247-95C6-925260D86074}\S-1-5-21-976655598-962914793-294660928-7222"
    2013-04-19 15:34:43.940 [pid=0x3e0,tid=0x120c] Completed get GPH path.
    2013-04-19 15:34:43.940 [pid=0x3e0,tid=0x120c] Completed set extensions.
    2013-04-19 15:34:43.956 [pid=0x3e0,tid=0x120c] Completed get GPO is relevant.
    2013-04-19 15:34:43.956 [pid=0x3e0,tid=0x120c] Variable %GPTPATH% = "\\mydomain.com.au\SysVol\mydomain.com.au\Policies\{14209C3C-8E16-4247-95C6-925260D86074}\User"
    2013-04-19 15:34:43.956 [pid=0x3e0,tid=0x120c] Completed get GPT path.
    2013-04-19 15:34:43.956 [pid=0x3e0,tid=0x120c] Completed RSoP init.
    2013-04-19 15:34:43.956 [pid=0x3e0,tid=0x120c] Completed get next GPO.
    2013-04-19 15:34:43.956 [pid=0x3e0,tid=0x120c] Completed check GPO license usage.
    2013-04-19 15:34:43.956 [pid=0x3e0,tid=0x120c] Completed GPO pre-processing.
    2013-04-19 15:34:43.971 [pid=0x3e0,tid=0x120c] Started removing policy.
    2013-04-19 15:34:43.971 [pid=0x3e0,tid=0x120c] Read GPH data file.
    2013-04-19 15:34:43.971 [pid=0x3e0,tid=0x120c] Completed parse of GPH XML.
    2013-04-19 15:34:43.971 [pid=0x3e0,tid=0x120c] Completed get tree root.
    2013-04-19 15:34:43.971 [pid=0x3e0,tid=0x120c] Deleted GPH data file.
    2013-04-19 15:34:43.987 [pid=0x3e0,tid=0x120c] Started package execution.
    2013-04-19 15:34:43.987 [pid=0x3e0,tid=0x120c] Set package timestamp variable (2013-04-19 19:34:43).
    2013-04-19 15:34:43.987 [pid=0x3e0,tid=0x120c] Starting class <Drives>.
    2013-04-19 15:34:43.987 [pid=0x3e0,tid=0x120c] RunOnce value created [SUCCEEDED(S_FALSE)]
    2013-04-19 15:34:43.987 [pid=0x3e0,tid=0x120c] Handle Children.
    2013-04-19 15:34:43.987 [pid=0x3e0,tid=0x120c] {935D1B74-9CB8-4e3c-9914-7DD559B7A417}
    2013-04-19 15:34:43.987 [pid=0x3e0,tid=0x120c] Starting class <Drive> - G:.
    2013-04-19 15:34:43.987 [pid=0x3e0,tid=0x120c] Set user security context.
    2013-04-19 15:34:44.003 [pid=0x3e0,tid=0x120c] Adding child elements to RSOP.
    2013-04-19 15:34:44.034 [pid=0x3e0,tid=0x120c] Properties handled.
    2013-04-19 15:34:44.034 [pid=0x3e0,tid=0x120c] RunOnce value created [SUCCEEDED(S_FALSE)]
    2013-04-19 15:34:44.034 [pid=0x3e0,tid=0x120c] Handle Children.
    2013-04-19 15:34:44.034 [pid=0x3e0,tid=0x120c] Set system security context.
    2013-04-19 15:34:44.034 [pid=0x3e0,tid=0x120c] EVENT : The user 'G:' preference item in the 'US Drive Mapping {14209C3C-8E16-4247-95C6-925260D86074}' Group Policy object was successfully removed.
    2013-04-19 15:34:44.034 [pid=0x3e0,tid=0x120c] Completed class <Drive> - G:.
    2013-04-19 15:34:44.034 [pid=0x3e0,tid=0x120c] {935D1B74-9CB8-4e3c-9914-7DD559B7A417}
    2013-04-19 15:34:44.049 [pid=0x3e0,tid=0x120c] Starting class <Drive> - M:.
    2013-04-19 15:34:44.049 [pid=0x3e0,tid=0x120c] Set user security context.
    2013-04-19 15:34:44.049 [pid=0x3e0,tid=0x120c] Adding child elements to RSOP.
    2013-04-19 15:34:44.096 [pid=0x3e0,tid=0x120c] Properties handled.
    2013-04-19 15:34:44.096 [pid=0x3e0,tid=0x120c] RunOnce value created [SUCCEEDED(S_FALSE)]
    2013-04-19 15:34:44.096 [pid=0x3e0,tid=0x120c] Handle Children.
    2013-04-19 15:34:44.096 [pid=0x3e0,tid=0x120c] Set system security context.
    2013-04-19 15:34:44.112 [pid=0x3e0,tid=0x120c] EVENT : The user 'M:' preference item in the 'US Drive Mapping {14209C3C-8E16-4247-95C6-925260D86074}' Group Policy object was successfully removed.
    2013-04-19 15:34:44.112 [pid=0x3e0,tid=0x120c] Completed class <Drive> - M:.
    2013-04-19 15:34:44.112 [pid=0x3e0,tid=0x120c] {935D1B74-9CB8-4e3c-9914-7DD559B7A417}
    2013-04-19 15:34:44.112 [pid=0x3e0,tid=0x120c] Starting class <Drive> - H:.
    2013-04-19 15:34:44.112 [pid=0x3e0,tid=0x120c] Set user security context.
    2013-04-19 15:34:44.112 [pid=0x3e0,tid=0x120c] Adding child elements to RSOP.
    2013-04-19 15:34:44.143 [pid=0x3e0,tid=0x120c] Properties handled.
    2013-04-19 15:34:44.143 [pid=0x3e0,tid=0x120c] RunOnce value created [SUCCEEDED(S_FALSE)]
    2013-04-19 15:34:44.143 [pid=0x3e0,tid=0x120c] Handle Children.
    2013-04-19 15:34:44.143 [pid=0x3e0,tid=0x120c] Set system security context.
    2013-04-19 15:34:44.143 [pid=0x3e0,tid=0x120c] EVENT : The user 'H:' preference item in the 'US Drive Mapping {14209C3C-8E16-4247-95C6-925260D86074}' Group Policy object was successfully removed.
    2013-04-19 15:34:44.158 [pid=0x3e0,tid=0x120c] Completed class <Drive> - H:.
    2013-04-19 15:34:44.158 [pid=0x3e0,tid=0x120c] {935D1B74-9CB8-4e3c-9914-7DD559B7A417}
    2013-04-19 15:34:44.158 [pid=0x3e0,tid=0x120c] Starting class <Drive> - T:.
    2013-04-19 15:34:44.158 [pid=0x3e0,tid=0x120c] Policy is not flagged for removal.
    2013-04-19 15:34:44.158 [pid=0x3e0,tid=0x120c] Completed class <Drive> - T:.
    2013-04-19 15:34:44.158 [pid=0x3e0,tid=0x120c] Completed class <Drives>.
    2013-04-19 15:34:44.158 [pid=0x3e0,tid=0x120c] Completed package execution.
    2013-04-19 15:34:44.174 [pid=0x3e0,tid=0x120c] Completed execution of removal package.
    2013-04-19 15:34:44.174 [pid=0x3e0,tid=0x120c] Completed remove GPH.
    2013-04-19 15:34:44.174 [pid=0x3e0,tid=0x120c] Started applying policy.
    2013-04-19 15:34:44.174 [pid=0x3e0,tid=0x120c] Set user security context.
    2013-04-19 15:34:44.174 [pid=0x3e0,tid=0x120c] Opened file.
    2013-04-19 15:34:44.174 [pid=0x3e0,tid=0x120c] Got file size.
    2013-04-19 15:34:44.174 [pid=0x3e0,tid=0x120c] Created file buffer.
    2013-04-19 15:34:44.190 [pid=0x3e0,tid=0x120c] Completed read file data.
    2013-04-19 15:34:44.190 [pid=0x3e0,tid=0x120c] Terminated file buffer.
    2013-04-19 15:34:44.190 [pid=0x3e0,tid=0x120c] Closed file handle.
    2013-04-19 15:34:44.190 [pid=0x3e0,tid=0x120c] Read GPE XML data file (1807 bytes total).
    2013-04-19 15:34:44.190 [pid=0x3e0,tid=0x120c] Set system security context.
    2013-04-19 15:34:44.190 [pid=0x3e0,tid=0x120c] Completed parse of GPE XML data.
    2013-04-19 15:34:44.190 [pid=0x3e0,tid=0x120c] Completed loading of package.
    2013-04-19 15:34:44.205 [pid=0x3e0,tid=0x120c] Completed get tree root.
    2013-04-19 15:34:44.205 [pid=0x3e0,tid=0x120c] Started package execution.
    2013-04-19 15:34:44.205 [pid=0x3e0,tid=0x120c] Set package timestamp variable (2013-04-19 19:34:43).
    2013-04-19 15:34:44.205 [pid=0x3e0,tid=0x120c] Starting class <Drives>.
    2013-04-19 15:34:44.205 [pid=0x3e0,tid=0x120c] RunOnce value created [SUCCEEDED(S_FALSE)]
    2013-04-19 15:34:44.205 [pid=0x3e0,tid=0x120c] Handle Children.
    2013-04-19 15:34:44.205 [pid=0x3e0,tid=0x120c] {935D1B74-9CB8-4e3c-9914-7DD559B7A417}
    2013-04-19 15:34:44.221 [pid=0x3e0,tid=0x120c] Starting class <Drive> - G:.
    2013-04-19 15:34:44.221 [pid=0x3e0,tid=0x120c] Set user security context.
    2013-04-19 15:34:44.221 [pid=0x3e0,tid=0x120c] Adding child elements to RSOP.
    2013-04-19 15:34:44.283 [pid=0x3e0,tid=0x120c] Properties handled.
    2013-04-19 15:34:44.283 [pid=0x3e0,tid=0x120c] RunOnce value created [SUCCEEDED(S_FALSE)]
    2013-04-19 15:34:44.283 [pid=0x3e0,tid=0x120c] Handle Children.
    2013-04-19 15:34:44.283 [pid=0x3e0,tid=0x120c] Set system security context.
    2013-04-19 15:34:44.299 [pid=0x3e0,tid=0x120c] EVENT : The user 'G:' preference item in the 'US Drive Mapping {14209C3C-8E16-4247-95C6-925260D86074}' Group Policy object applied successfully.
    2013-04-19 15:34:44.299 [pid=0x3e0,tid=0x120c] Completed class <Drive> - G:.
    2013-04-19 15:34:44.299 [pid=0x3e0,tid=0x120c] {935D1B74-9CB8-4e3c-9914-7DD559B7A417}
    2013-04-19 15:34:44.299 [pid=0x3e0,tid=0x120c] Starting class <Drive> - M:.
    2013-04-19 15:34:44.299 [pid=0x3e0,tid=0x120c] Set user security context.
    2013-04-19 15:34:44.299 [pid=0x3e0,tid=0x120c] Adding child elements to RSOP.
    2013-04-19 15:34:44.314 [pid=0x3e0,tid=0x120c] Properties handled.
    2013-04-19 15:34:44.330 [pid=0x3e0,tid=0x120c] RunOnce value created [SUCCEEDED(S_FALSE)]
    2013-04-19 15:34:44.330 [pid=0x3e0,tid=0x120c] Handle Children.
    2013-04-19 15:34:44.330 [pid=0x3e0,tid=0x120c] Set system security context.
    2013-04-19 15:34:44.330 [pid=0x3e0,tid=0x120c] EVENT : The user 'M:' preference item in the 'US Drive Mapping {14209C3C-8E16-4247-95C6-925260D86074}' Group Policy object applied successfully.
    2013-04-19 15:34:44.330 [pid=0x3e0,tid=0x120c] Completed class <Drive> - M:.
    2013-04-19 15:34:44.330 [pid=0x3e0,tid=0x120c] {935D1B74-9CB8-4e3c-9914-7DD559B7A417}
    2013-04-19 15:34:44.346 [pid=0x3e0,tid=0x120c] Starting class <Drive> - H:.
    2013-04-19 15:34:44.346 [pid=0x3e0,tid=0x120c] Starting filter [AND NOT FilterComputer].
    2013-04-19 15:34:44.346 [pid=0x3e0,tid=0x120c] Adding child elements to RSOP.
    2013-04-19 15:34:44.346 [pid=0x3e0,tid=0x120c] Passed filter [FilterComputer].
    2013-04-19 15:34:44.346 [pid=0x3e0,tid=0x120c] Filters passed.
    2013-04-19 15:34:44.346 [pid=0x3e0,tid=0x120c] Set user security context.
    2013-04-19 15:34:44.346 [pid=0x3e0,tid=0x120c] Adding child elements to RSOP.
    2013-04-19 15:34:44.377 [pid=0x3e0,tid=0x120c] Properties handled.
    2013-04-19 15:34:44.377 [pid=0x3e0,tid=0x120c] RunOnce value created [SUCCEEDED(S_FALSE)]
    2013-04-19 15:34:44.377 [pid=0x3e0,tid=0x120c] Handle Children.
    2013-04-19 15:34:44.377 [pid=0x3e0,tid=0x120c] Set system security context.
    2013-04-19 15:34:44.392 [pid=0x3e0,tid=0x120c] EVENT : The user 'H:' preference item in the 'US Drive Mapping {14209C3C-8E16-4247-95C6-925260D86074}' Group Policy object applied successfully.
    2013-04-19 15:34:44.392 [pid=0x3e0,tid=0x120c] Completed class <Drive> - H:.
    2013-04-19 15:34:44.392 [pid=0x3e0,tid=0x120c] {935D1B74-9CB8-4e3c-9914-7DD559B7A417}
    2013-04-19 15:34:44.392 [pid=0x3e0,tid=0x120c] Starting class <Drive> - T:.
    2013-04-19 15:34:44.392 [pid=0x3e0,tid=0x120c] Starting filter [AND NOT FilterComputer].
    2013-04-19 15:34:44.392 [pid=0x3e0,tid=0x120c] Adding child elements to RSOP.
    2013-04-19 15:34:44.408 [pid=0x3e0,tid=0x120c] Passed filter [FilterComputer].
    2013-04-19 15:34:44.408 [pid=0x3e0,tid=0x120c] Filters passed.
    2013-04-19 15:34:44.408 [pid=0x3e0,tid=0x120c] Set user security context.
    2013-04-19 15:34:44.408 [pid=0x3e0,tid=0x120c] Adding child elements to RSOP.
    2013-04-19 15:34:44.548 [pid=0x3e0,tid=0x120c] Properties handled.
    2013-04-19 15:34:44.548 [pid=0x3e0,tid=0x120c] RunOnce value created [SUCCEEDED(S_FALSE)]
    2013-04-19 15:34:44.548 [pid=0x3e0,tid=0x120c] Handle Children.
    2013-04-19 15:34:44.548 [pid=0x3e0,tid=0x120c] Set system security context.
    2013-04-19 15:34:44.548 [pid=0x3e0,tid=0x120c] EVENT : The user 'T:' preference item in the 'US Drive Mapping {14209C3C-8E16-4247-95C6-925260D86074}' Group Policy object applied successfully.
    2013-04-19 15:34:44.564 [pid=0x3e0,tid=0x120c] Completed class <Drive> - T:.
    2013-04-19 15:34:44.564 [pid=0x3e0,tid=0x120c] Completed class <Drives>.
    2013-04-19 15:34:44.564 [pid=0x3e0,tid=0x120c] Completed package execution.
    2013-04-19 15:34:44.564 [pid=0x3e0,tid=0x120c] Completed execution of apply package.
    2013-04-19 15:34:44.564 [pid=0x3e0,tid=0x120c] Update GPH : apmCreateFoldersEx
    2013-04-19 15:34:44.564 [pid=0x3e0,tid=0x120c] Update GPH : xmlRemovalPackage
    2013-04-19 15:34:44.580 [pid=0x3e0,tid=0x120c] Update GPH : apmWriteFile
    2013-04-19 15:34:44.580 [pid=0x3e0,tid=0x120c] Updated GPH.
    2013-04-19 15:34:44.580 [pid=0x3e0,tid=0x120c] Completed apply GPO.
    2013-04-19 15:34:44.580 [pid=0x3e0,tid=0x120c] Completed GPO post-processing.
    2013-04-19 15:34:44.580 [pid=0x3e0,tid=0x120c] Completed get next GPO. [SUCCEEDED(S_FALSE)]
    2013-04-19 15:34:44.580 [pid=0x3e0,tid=0x120c] Completed calculate precedence.
    2013-04-19 15:34:44.580 [pid=0x3e0,tid=0x120c] Completed get RSoP class.
    2013-04-19 15:34:44.595 [pid=0x3e0,tid=0x120c] Completed initialize namespace.
    2013-04-19 15:34:44.595 [pid=0x3e0,tid=0x120c] WQL : SELECT * FROM RSOP_PolmkrSetting WHERE polmkrBaseCseGuid = "{5794DAFD-BE60-433f-88A2-1A31939AC01F}"
    2013-04-19 15:34:44.595 [pid=0x3e0,tid=0x120c] Executed WQL query.
    2013-04-19 15:34:44.595 [pid=0x3e0,tid=0x120c] Purged 4 old RSoP entries.
    2013-04-19 15:34:44.611 [pid=0x3e0,tid=0x120c] Logging 4 new RSoP entries.
    2013-04-19 15:34:44.611 [pid=0x3e0,tid=0x120c] RSoP Entry 0
    2013-04-19 15:34:44.611 [pid=0x3e0,tid=0x120c]  <INSTANCE CLASSNAME="RSOP_PolmkrDriveSetting">
    <PROPERTY NAME="name">
    <VALUE>G:</VALUE></PROPERTY>
    <PROPERTY NAME="GPOID">
    <VALUE>cn={14209C3C-8E16-4247-95C6-925260D86074},cn=policies,cn=system,DC=mydomain,DC=com,DC=au</VALUE></PROPERTY>
    <PROPERTY NAME="SOMID">
    <VALUE>OU=Windows8 Machines,OU=USA,DC=mydomain,DC=com,DC=au</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseGpeGuid">
    <VALUE>{2EA1A81B-48E5-45E9-8BB7-A6E3AC170006}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseCseGuid">
    <VALUE>{5794DAFD-BE60-433f-88A2-1A31939AC01F}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseGpoDisplayName">
    <VALUE>US Drive Mapping</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseGpoGuid">
    <VALUE>{14209C3C-8E16-4247-95C6-925260D86074}</VALUE></PROPERTY>
    <PROPERTY NAME="id">
    <VALUE>{67CE9D8B-48A8-433A-813F-2B549875ABAA}</VALUE></PROPERTY>
    <PROPERTY NAME="precedence" CHANGETYPE="3">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="creationTime">
    <VALUE>20130419193444.221000+000</VALUE></PROPERTY>
    <INSTANCE CLASSNAME="RSOP_PolmkrDriveItem">
    <PROPERTY NAME="polmkrClassClsid">
    <VALUE>{935D1B74-9CB8-4e3c-9914-7DD559B7A417}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassName">
    <VALUE>G:</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassStatus">
    <VALUE>G:</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassImage">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassChanged">
    <VALUE>2013-04-16 18:53:56</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassUid">
    <VALUE>{840ACB3A-24B1-40C9-9CFA-936FC3F08A9E}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassRemovePolicy">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassUserContext">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassBypassErrors">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrAction">
    <VALUE>R</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrThisDrive">
    <VALUE>NOCHANGE</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrAllDrives">
    <VALUE>NOCHANGE</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrUserName">
    <VALUE></VALUE></PROPERTY>
    <PROPERTY NAME="polmkrPath">
    <VALUE>\\detfs01\general</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrLabel">
    <VALUE></VALUE></PROPERTY>
    <PROPERTY NAME="polmkrPersistent">
    <VALUE>0</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrUseLetter">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrLetter">
    <VALUE>G</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrActionResolved">
    <VALUE>R</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrLetterResolved">
    <VALUE>g:</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultCodeValue">
    <VALUE>0</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultCode">
    <VALUE>0x00000000</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultText">
    <VALUE>The operation completed successfully.</VALUE></PROPERTY></INSTANCE>
    <PROPERTY NAME="polmkrBaseHash">
    <VALUE>RSOP_PolmkrDriveSetting.polmkrLetter=&quot;G&quot;</VALUE></PROPERTY></INSTANCE>
    2013-04-19 15:34:44.626 [pid=0x3e0,tid=0x120c] RSoP Entry 1
    2013-04-19 15:34:44.626 [pid=0x3e0,tid=0x120c]  <INSTANCE CLASSNAME="RSOP_PolmkrDriveSetting">
    <PROPERTY NAME="name">
    <VALUE>M:</VALUE></PROPERTY>
    <PROPERTY NAME="GPOID">
    <VALUE>cn={14209C3C-8E16-4247-95C6-925260D86074},cn=policies,cn=system,DC=mydomain,DC=com,DC=au</VALUE></PROPERTY>
    <PROPERTY NAME="SOMID">
    <VALUE>OU=Windows8 Machines,OU=USA,DC=mydomain,DC=com,DC=au</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseGpeGuid">
    <VALUE>{2EA1A81B-48E5-45E9-8BB7-A6E3AC170006}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseCseGuid">
    <VALUE>{5794DAFD-BE60-433f-88A2-1A31939AC01F}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseGpoDisplayName">
    <VALUE>US Drive Mapping</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseGpoGuid">
    <VALUE>{14209C3C-8E16-4247-95C6-925260D86074}</VALUE></PROPERTY>
    <PROPERTY NAME="id">
    <VALUE>{DBA37AA7-F6DF-4E18-9BD4-383BB43637F3}</VALUE></PROPERTY>
    <PROPERTY NAME="precedence" CHANGETYPE="3">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="creationTime">
    <VALUE>20130419193444.299000+000</VALUE></PROPERTY>
    <INSTANCE CLASSNAME="RSOP_PolmkrDriveItem">
    <PROPERTY NAME="polmkrClassClsid">
    <VALUE>{935D1B74-9CB8-4e3c-9914-7DD559B7A417}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassName">
    <VALUE>M:</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassStatus">
    <VALUE>M:</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassImage">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassChanged">
    <VALUE>2013-04-16 18:55:02</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassUid">
    <VALUE>{3D62A401-52C3-40D1-999A-32D0F0D00117}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassRemovePolicy">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassUserContext">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassBypassErrors">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrAction">
    <VALUE>R</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrThisDrive">
    <VALUE>NOCHANGE</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrAllDrives">
    <VALUE>NOCHANGE</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrUserName">
    <VALUE></VALUE></PROPERTY>
    <PROPERTY NAME="polmkrPath">
    <VALUE>\\detfs01\EmailArchives</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrLabel">
    <VALUE></VALUE></PROPERTY>
    <PROPERTY NAME="polmkrPersistent">
    <VALUE>0</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrUseLetter">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrLetter">
    <VALUE>M</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrActionResolved">
    <VALUE>R</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrLetterResolved">
    <VALUE>m:</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultCodeValue">
    <VALUE>0</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultCode">
    <VALUE>0x00000000</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultText">
    <VALUE>The operation completed successfully.</VALUE></PROPERTY></INSTANCE>
    <PROPERTY NAME="polmkrBaseHash">
    <VALUE>RSOP_PolmkrDriveSetting.polmkrLetter=&quot;M&quot;</VALUE></PROPERTY></INSTANCE>
    2013-04-19 15:34:44.642 [pid=0x3e0,tid=0x120c] RSoP Entry 2
    2013-04-19 15:34:44.642 [pid=0x3e0,tid=0x120c]  <INSTANCE CLASSNAME="RSOP_PolmkrDriveSetting">
    <PROPERTY NAME="name">
    <VALUE>H:</VALUE></PROPERTY>
    <PROPERTY NAME="GPOID">
    <VALUE>cn={14209C3C-8E16-4247-95C6-925260D86074},cn=policies,cn=system,DC=mydomain,DC=com,DC=au</VALUE></PROPERTY>
    <PROPERTY NAME="SOMID">
    <VALUE>OU=Windows8 Machines,OU=USA,DC=mydomain,DC=com,DC=au</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseGpeGuid">
    <VALUE>{2EA1A81B-48E5-45E9-8BB7-A6E3AC170006}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseCseGuid">
    <VALUE>{5794DAFD-BE60-433f-88A2-1A31939AC01F}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseGpoDisplayName">
    <VALUE>US Drive Mapping</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseGpoGuid">
    <VALUE>{14209C3C-8E16-4247-95C6-925260D86074}</VALUE></PROPERTY>
    <PROPERTY NAME="id">
    <VALUE>{AEEB1495-02E1-4B94-909B-C8DE89C82C0B}</VALUE></PROPERTY>
    <PROPERTY NAME="precedence" CHANGETYPE="3">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="creationTime">
    <VALUE>20130419193444.346000+000</VALUE></PROPERTY>
    <INSTANCE CLASSNAME="RSOP_PolmkrComputerFilterItem">
    <PROPERTY NAME="polmkrBool">
    <VALUE>AND</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrNot">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrType">
    <VALUE>NETBIOS</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrName">
    <VALUE>d-7-user1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultCodeValue">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultCode">
    <VALUE>0x00000001</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultText">
    <VALUE>Incorrect function.</VALUE></PROPERTY></INSTANCE>
    <INSTANCE CLASSNAME="RSOP_PolmkrDriveItem">
    <PROPERTY NAME="polmkrClassClsid">
    <VALUE>{935D1B74-9CB8-4e3c-9914-7DD559B7A417}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassName">
    <VALUE>H:</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassStatus">
    <VALUE>H:</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassImage">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassChanged">
    <VALUE>2013-04-18 20:14:04</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassUid">
    <VALUE>{04A87992-7420-44CE-B2B6-1B07FE654F77}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassRemovePolicy">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassUserContext">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassBypassErrors">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrAction">
    <VALUE>R</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrThisDrive">
    <VALUE>NOCHANGE</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrAllDrives">
    <VALUE>NOCHANGE</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrUserName">
    <VALUE></VALUE></PROPERTY>
    <PROPERTY NAME="polmkrPath">
    <VALUE>\\detfs01\users\%username%</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrLabel">
    <VALUE></VALUE></PROPERTY>
    <PROPERTY NAME="polmkrPersistent">
    <VALUE>0</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrUseLetter">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrLetter">
    <VALUE>H</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrActionResolved">
    <VALUE>R</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrLetterResolved">
    <VALUE>h:</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultCodeValue">
    <VALUE>0</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultCode">
    <VALUE>0x00000000</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultText">
    <VALUE>The operation completed successfully.</VALUE></PROPERTY></INSTANCE>
    <PROPERTY NAME="polmkrBaseHash">
    <VALUE>RSOP_PolmkrDriveSetting.polmkrLetter=&quot;H&quot;</VALUE></PROPERTY></INSTANCE>
    2013-04-19 15:34:44.658 [pid=0x3e0,tid=0x120c] RSoP Entry 3
    2013-04-19 15:34:44.658 [pid=0x3e0,tid=0x120c]  <INSTANCE CLASSNAME="RSOP_PolmkrDriveSetting">
    <PROPERTY NAME="name">
    <VALUE>T:</VALUE></PROPERTY>
    <PROPERTY NAME="GPOID">
    <VALUE>cn={14209C3C-8E16-4247-95C6-925260D86074},cn=policies,cn=system,DC=mydomain,DC=com,DC=au</VALUE></PROPERTY>
    <PROPERTY NAME="SOMID">
    <VALUE>OU=Windows8 Machines,OU=USA,DC=mydomain,DC=com,DC=au</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseGpeGuid">
    <VALUE>{2EA1A81B-48E5-45E9-8BB7-A6E3AC170006}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseCseGuid">
    <VALUE>{5794DAFD-BE60-433f-88A2-1A31939AC01F}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseGpoDisplayName">
    <VALUE>US Drive Mapping</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrBaseGpoGuid">
    <VALUE>{14209C3C-8E16-4247-95C6-925260D86074}</VALUE></PROPERTY>
    <PROPERTY NAME="id">
    <VALUE>{7E0CA279-4F24-4773-BD3D-8E4E8AA8AF86}</VALUE></PROPERTY>
    <PROPERTY NAME="precedence" CHANGETYPE="3">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="creationTime">
    <VALUE>20130419193444.392000+000</VALUE></PROPERTY>
    <INSTANCE CLASSNAME="RSOP_PolmkrComputerFilterItem">
    <PROPERTY NAME="polmkrBool">
    <VALUE>AND</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrNot">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrType">
    <VALUE>DNS</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrName">
    <VALUE>nb-864-user1.mydomain.com.au</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultCodeValue">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultCode">
    <VALUE>0x00000001</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultText">
    <VALUE>Incorrect function.</VALUE></PROPERTY></INSTANCE>
    <INSTANCE CLASSNAME="RSOP_PolmkrDriveItem">
    <PROPERTY NAME="polmkrClassClsid">
    <VALUE>{935D1B74-9CB8-4e3c-9914-7DD559B7A417}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassName">
    <VALUE>T:</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassStatus">
    <VALUE>T:</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassImage">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassChanged">
    <VALUE>2013-04-19 13:21:12</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassUid">
    <VALUE>{57350522-F65A-4B69-84D5-7FD5EAA99875}</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassRemovePolicy">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassUserContext">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassBypassErrors">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrAction">
    <VALUE>R</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrThisDrive">
    <VALUE>NOCHANGE</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrAllDrives">
    <VALUE>NOCHANGE</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrUserName">
    <VALUE></VALUE></PROPERTY>
    <PROPERTY NAME="polmkrPath">
    <VALUE>\\detfs01\users</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrLabel">
    <VALUE></VALUE></PROPERTY>
    <PROPERTY NAME="polmkrPersistent">
    <VALUE>0</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrUseLetter">
    <VALUE>1</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrLetter">
    <VALUE>T</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrActionResolved">
    <VALUE>R</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrLetterResolved">
    <VALUE>t:</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultCodeValue">
    <VALUE>0</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultCode">
    <VALUE>0x00000000</VALUE></PROPERTY>
    <PROPERTY NAME="polmkrClassResultText">
    <VALUE>The operation completed successfully.</VALUE></PROPERTY></INSTANCE>
    <PROPERTY NAME="polmkrBaseHash">
    <VALUE>RSOP_PolmkrDriveSetting.polmkrLetter=&quot;T&quot;</VALUE></PROPERTY></INSTANCE>
    2013-04-19 15:34:44.658 [pid=0x3e0,tid=0x120c] Completed logging of RSoP data.
    2013-04-19 15:34:44.658 [pid=0x3e0,tid=0x120c] Completed commit reporting.
    2013-04-19 15:34:44.658 [pid=0x3e0,tid=0x120c] Completed GPO list post-processing.
    2013-04-19 15:34:44.673 [pid=0x3e0,tid=0x120c] Completed get GPO list. [SUCCEEDED(S_FALSE)]
    2013-04-19 15:34:44.673 [pid=0x3e0,tid=0x120c] Completed CSE post-processing.
    2013-04-19 15:34:44.673 [pid=0x3e0,tid=0x120c] User impersonation uninitialized.
    2013-04-19 15:34:44.673 [pid=0x3e0,tid=0x120c] Leaving ProcessGroupPolicyExDrives() returned 0x00000000
    2013-04-19 15:34:44.673 [pid=0x3e0,tid=0x120c]

  • Disadvantages of using DNS in names.

    Hi everyone,
    Can anyone explain the disadvantages of using DNS in names in weblogic cluster.
    Regards,
    Vardhan.

    Hi,
    One of the very common disadvantage of the BDC is that it doesnt take into account the configuration settings of the screen. Suppose you make any changes in the screen fields (e.g. you make some of the fields in the screen non editable or you make the fields invisible), in this case BDC will throw an error message beacuse the screen mentioned will now no more contain that field or the field will now no more will be an input field.
    If at all there is change in the screen settings or transaction look and feel is changed or screen manouvering is changed in the transaction then the BDC will fail and will give error messages.
    This is the major disadvantage of using a BDC
    Reward points if found useful
    Mayank Agarwal

  • Different DNS domain name

    We have an architecture compose of two gateways and one portal/profile server, the are all respondig under the same DNS domain name, "domainname.ca". The client is looking to installed a third gateway under a different DNS domain name "newdomainname.com", but want to use the same portal/profile server.
    Is this possible, if so how?

    Hello,
    Try to edit the unknown server. After this click "Resolve". Your IP address will appear.
    Click OK and now your server will have an associated IP address.
    Regards.
    Seb.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Difference between 006 DNS Servers and 015 DNS Domain Name

    hi,
    what's difference between 006 DNS Servers and 015 DNS Domain Name?
    please guide me.

    Hi
    Option 006 DNS servers           = IP Address of your DNS Server, e.g, 10.10.10.1
    Option 015 DNS Domain Name       = test.local, your domain name.
    Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Trouble with DNS/NetBIOS name resolution over VPN

    I’ve got one for the DNS/WINS gurus out there who are also familiar with VPN connections.
    We have a VPN setup on our Mikrotik RouterBoard 532 for a number of employees running Windows 7 Pro laptops. Unfortunately the Mikrotik is maintained by our ISP so I don’t have access to it, but I can call them to make changes. Anyhow, I do not believe it
    is a problem with the Mikrotik.
    The problem is with resolving NetBIOS names (UNC paths, drive letters, etc…) over the VPN from remote locations, and ONLY with laptops joined to our
    abc.local domain. If I use my home PC or disjoin the domain laptop from the
    abc.local domain and return it to WORKGROUP, keeping the same Windows VPN client settings, I am able to resolve paths just fine.
    For example, when I type \\server1 from Start>Run, it fails and tells me “server1 is not accessible. You might not have permission to use this network resource.” Using the FQDN is no problem at all, which makes me believe the problem is with NetBIOS resolution
    and takes me to the WINS servers on the network.
    The VPN hands out primary and secondary WINS servers, and they appear to be configured correctly in our Server 2003/2008/2012 environment. When I run
    nbtstat –A IPAddressOfLaptop from a WINS server it resolves the laptop, and the same command from the laptop looking to the server resolves OK too.
    What’s strange is that when I ping “server1” I get a valid response from server1.abc.local, as expected, but for some reason I still can’t browse to it from start>Run… “\\server1”.
    The DNS suffix abc.local is in the “DNS suffix or this connection” field in the properties of the VPN client since the Mikrotik VPN is unable to deal this to clients.
    I have ruled out Group Policy as the culprit because even after removing any group policy from applying to one of the laptops the result was the same.
    I’ve used every resource and tool that I could to try and find where the problem lies and can’t seem to solve it. Everything looks properly configured.
    I would greatly appreciate some assistance!

    When you run an ipconfig /all, do you see the WINS server addresses being provided? How about the connection specific suffix for the domain, domain.local (or whatever it is called)?
    I assume that you are using the Microtik as the VPN server and you are not using AD accounts for authentication. I would highly suggest to do that, otherwise, there will be a mismatch.
    What VPN client is being used?
    What is offering DHCP, a Windows Server or the Microtik?
    FYI, using NetBIOS connection method, such as \\server1, will use the current logged on account for authentication. If the VPN credentials are not AD credentials, but the VPN client is setting the logged on credentials account
    (some of them do that), then it will cause issues.
    From what I see that NetBIOS is not being blocked, so that doesn't appear to be an issue, but it's coming down to credentials. Maybe in the mapped drive you can preset the credentials, and might be one way around it.
    Ace Fekay
    MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
    This post is provided AS-IS with no warranties or guarantees and confers no rights.

  • DNS cache " Name Does not Exist"

    Hey Guys,
    So we've been experiencing a really weird issue related to the DNS for past couple of months. Here are the details:
    1) Our domain machines are Windows 7 Enterprise and their DNS points to Windows DNS Servers
    2) For companyxyz.net internal sites, the Windows DNS resolves those from its
    companyxyz.net zone.
    3) For public *.companyxyz.com records, the Windows DNS has conditional forwarders to point these requests to our Linux Bind Servers. And than the authoritative name servers respond to these queries accordingly
    4) Our internal employees use the public records such as testing.companyxyz.com 
    Problems:
    1) Employees on the internal network would randomly experience page not found on their browsers while trying to hit
    testing.companyxyz.com. When we try to ping this URL, ping would fail too. However, NSLOOKUP would work perfectly fine and return the correct results. ipconfig /flushdns fixes the issue right away
    2) During the time when this problem is occurring, if I look into the local cache ( ipconfig /displaydns), I find an entry saying:
        testing.companyxyz.com
        Name does not exist. 
    ipconfig /flushdns obviously clears out this record along with the other local cached records and fixes the issue.
    3) Point the local computers directly to the Linux Bind servers as DNS never create this issue. It's only when they are pointing to the Windows DNS and going to this public record. The problem also seems to occur a lot more frequently if there are considerably
    high number of hits to this URL.
    Have you guys experienced this issue before? I am looking for a fix for this issue and not having the end-users to flush their dns constantly. Also note this problem occurs sometimes once a day, or 2 -3 times a week. It's very random.
    Thanks.
    Bilal
     

    Hi,
    It seems that the issue is related to your Windows 7 client. Considering whether there is DNS attack or virus on this computer.
    Please try to do the safety scan first.
    Please monitor the DNS server performance referring these article:
    Monitoring DNS server performance
    http://technet.microsoft.com/en-us/library/cc778608(WS.10).aspx
    Monitoring and Troubleshooting DNS
    http://www.tech-faq.com/monitoring-and-troubleshooting-dns.html
    For further step, we need to capture the traffic by using Network monitor when the issue happened and we continuously ping
    testing.companyxyz.com.
    Microsoft Network Monitor 3.4
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    Let’s see whether there is DNS request happened and the DNS request is handled.
    You can post back the save traffic log here for our further research.
    Kate Li
    TechNet Community Support

  • Change DNS host name automatically when one device is down

    Hi all
    I am first copying below the question which I have posted in a thread related to DNS few days back .
    You cannot vote on your own post                    
    Hi
    our network team has setup Bluecoat proxy server in our main office and DR site . We have configured GPO to populate the details of proxy server hostname in the proxy setting  eg : Proxy server .  IP1 is the IP address for the device in Head office
    and IP2 is the IP address assigned for device in DR site. currently  we have given a DNS entry as
    Proxyserver - IP1.
    So DNS resolves the IP address of device in Head office and authentication and internet access works.
    But we want to use the DR device  to be used automatically   (only )when head office device is not reachable. But how to configure the settings for DNS I am not sure.
    I don't want to use round robin as it will send the traffic to both head office and DR in a load balancing fashion .
    for this request I had received an advice to use a script to monitor the first device continuously and if not reachable  then change the Hostname in DNS to that of second device  .
    Let me know if anyone can help me on this.
    Thanks in advance
    Midhin 

    Hi Midhin,
    Agree with Jrv, I also recommend you can consult proxy vendor for a better solution.
    In addition, if you still want to update host name in DNS via Powershell, please refer to the script to update A record in DNS:
    $Zone = "dns zone"
    $oldobj = Get-DnsServerResourceRecord -ZoneName $Zone -RRType "A" -Name "hostname"
    $newobj = Get-DnsServerResourceRecord -ZoneName $Zone -RRType "A" -Name "hostname"
    $NewObj.RecordData.IPv4Address = "newipaddress"
    Set-DnsServerResourceRecord -NewInputObject $NewObj -OldInputObject $OldObj -ZoneName $Zone
    If there is anything else regarding the powershell script issue, please feel free to post back.
    Best Regards,
    Anna Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Old dns host name still showing!

    I setup a new OSX 10.6 server and the dns name that i choose at the installation setup wizard was server1.mydomain.com.
    after the installation is done, i decided to get rid of this name and setup a new dns name.. so i picked up a server2.mydomain.com
    dns is resolving fine when i host server2.mydomain.com i got the server ip address and when i host the server ip it resolves the dns name, and also when i run the command changeip -checkhostname
    both names matches and it says nothing to change.
    my only problem now is when I go to Push Notifications & under configures services box, I see the old dns name and right next to it "iCal".. how can i change that so it will just match the new dns name which is dns2.mydomain.com ??
    So I went to the iCal service and there is a button to Remove the old dns name..i clicked on it and it asks me for username and password for server1.mydomain.com to stop delivering push calendar notifications and when I click on connect, it shows an error:
    Server Cannot be found on the network, check that the server hostname you've provided is valid or try again later?
    Any idea or thoughts ?
    Thanks

    Here's the full dump of settings for calendar:
    $ sudo serveradmin settings calendar
    If you've got settings showing for your old host, shut off the calendar server, and then try resetting those references via serveradmin. (See +serveradmin help+ for details)
    If that fails, I'd then start by pulling the notifications off in Server Admin and shutting off iCal Server, and re-adding calendar, and restarting, and re-adding the notifications.
    Failing that, (ugh, not my preferred choice nor preferred suggestion) reinstall.

Maybe you are looking for