L2 and L3 Forwarding Method in the Same WAE

      Hi Everyone,
      Is possible to use simultaneously L2 and L3 Forwarding Method (WCCPv2) in the same WAE.
      I wanna to design a cluster with 2 WAE using the same service group in a DC and I wanna support both the L2 and L3
      Forwarding Method at the same time..
      If yes, is there any link when I can get a documentation showing some example configuration
     Thanks in Advanced,
     My Best Regards,
         Andre Lomonaco

Hi Andrej,
If I understand this correctly, then your best option is to use G-GRE (Generic GRE) as egress method, and use GRE redirection and MASK assignment. See an Example below.
wccp router-list 1 172.16.10.1
wccp tcp-promiscuous service-pair 61 62 router-list-num 1 mask-assign
wccp version 2
egress-method generic-gre intercept-method wccp
For more details, please follow below CCO URL.
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v441/configuration/guide/traffic.html#wp1041742
Ahsan

Similar Messages

Why the jsp tag jsp:forward page="page.jsp" / works when i work with web server iPlanet in a Solaris machine and doesn't work with the same web server, in a Windows 2000 machine ?

The request parameters don't go to the "page.jsp"...

If someone else runs into this, here is how I solved the problem -
          If you create a PrintWriter object with the autoflush option, it
          doesn't flush the underlying buffer till you call println on it. I
          looked through the generated code for the servlet, and it was doing a
          JSPWriter.print() to output information.
          So, I changed the ResponseWrapper to keep a handle to the PrintWriter
          object, and then flush it in the filter, and that works.
          Why the same code behaves differently in JRun & Weblogic, I'm not sure
          --Sridhar

Is it possible to use both an ILB and an ELB (listening on the same port) in the same Azure cloud service?

I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
So, a typical Lync deployment looks like this:
       Internal users
               |
               443
                  |
          Internal LB
        192.168.0.20
        443         443
          |               |
   Lync FE 1     Lync FE 2
192.168.0.21 192.168.0.22
          |               |
      4443        4443
          External LB
       Public IP Address
                 |
              443
                 |
       External Users
This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
is the keyword here.
After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
For reference, my commands are:
Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
(This completes successfully)
Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
(This fails)
The existing external endpoint is configured as such:
Get-AzureVM LYNCFE1 | get-azureendpoint
LBSetName : HttpsExtLB
LocalPort : 4443
Name : HTTPS-Ext
Port : 443
Protocol : tcp
Vip :
ProbePath :
ProbePort : 4443
ProbeProtocol : tcp
ProbeIntervalInSeconds : 15
ProbeTimeoutInSeconds : 31
EnableDirectServerReturn : False
Acl : {}
InternalLoadBalancerName :
IdleTimeoutInMinutes :
LoadBalancerDistribution :
The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
shouldn't be any conflict here... however it looks like there is one instead.
Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?

Hello Massimo Pascucci,
The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
known as the Internal load balanced IP) per cloud service.
There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
You can leave your feedback by following the link below:
https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
Refer to this article for more information on Internal load balancer:
http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
Thanks,
Syed Irfan Hussain

ASA 5505 as a SSL VPN Server and Easy VPN Client at the same time?

Is it possible to configure and operate the ASA 5505 as a SSL VPN server and Easy VPN Client at the same time? We would like to configure a few of these without having to purchase additional ASA 5505 and use a 2 device method (1 SSL VPN Server and 1 Easy VPN Client). Thanks in advance.

I don't think it is possible. Following links may help you
http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008068dabe.html
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008071c428.shtml

JSR 172: error while invoking methods with the same signature

Hi
I am facing a peculiar problem which is not making sense to me. This is what I have done:
1. Written a simple web service that has two methods: sayHello and sayHellToMe. Both these methods have same signatures. They do not take in any parameter and return a string.
2. Deployed this web service (document/literal) type on Axis 1.2
3. Generated the stub classes from the wsdl file using Sun Wireless Toolkit's Stub Generator
4. I have now written a MIDlet that uses this stub class to invoke both the methods one after the other.
I enabled SOAPMonitor on Axis and saw the SOAP Request and SOAP Response messages. I observed the following:
1. In the first method: sayHello - everything works fine (with a few tweaks in the Stub class)
2. However, while invoking the second method sayHelloToMe, the SOAP Body tag in the SOAP Request does not contain any method name. I checked out the Stub class, the qnames and the types are all correct..
I also realized that this behavior is seen only when I have methods with the same signature in the web service. Any idea why this might be happening? It seems like a very weird problem.
Any help in this regard will be greatly appreciated.
Thanks,
Arati

Hi, I'm closing this thread and opening the same in another as the content got pasted in reader un friendly format and i'm unable to change the format.
Thanks,
Ravi.

Accessing a private variable from a public method of the same class

can anyone please tell me how to access a private variable, declared in a private method from a public method of the same class?
here is the code, i'm trying to get the variable int[][][] grids.
public static int[][] generateS(boolean[][] constraints)
private static int[][][] sudokuGrids()
    int[][][] grids; // array of arrays!
    grids = new int[][][]
    {

Are you sure that you want to have everything static here? You're possibly throwing away all the object-oriented goodness that java has to offer.
Anyway, it seems to me that you can't get to that variable because it is buried within a method -- think scoping rules. I think that if you want to get at that variable your program design may be under the weather and may benefit from a significant refactoring in an OOP-manner.
If you need more specific help, then ask away, but give us more information please about what you are trying to accomplish here and how you want to do this. Good luck.
Pete
Edited by: petes1234 on Nov 16, 2007 7:51 PM

When I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router

when I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router.
Below is some info i get about ports.
I tried to set DMZ on my main router to have full access to ported to access point upstair which is in the ip of 192.168.1.2 and the main router in the living room is the gateway router with the 192.168.1.1 ip.
I still cant see apple tv after i try the DMZ method.
any suggestion ?
These network ports are used by Apple TV for communications on your network.
TCP port 123 is used to communicate with a network time server.
TCP port 3689 is used to communicate with iTunes while using the iTunes Library Sharing feature.
UDP port 5353 is used by Apple TV for automatically finding computers with iTunes on your network using Bonjour.
TCP port 80 is used for communicating with podcast servers.
TCP port 80 and 443 are used for basic and secure communications with the iTunes Store via the Internet.
TCP port 53 is used for regular DNS.
These are well-known ports used by Apple products, like iTunes. If you can use all the features of iTunes, these ports are likely already open on your firewall or NAT router. Note: These ports may also used by other services such as YouTube and Flickr.

When the Apple TV is paired with a remote, it means only that remote can control it, when it's not paired any remote can control it. You will need a remote for each of your devices.

Can i install windows 7 and OS X together on the same Mac Book Pro?

can i install windows 7 and OS X together on the same Mac Book Pro?

You can do it either using Boot Camp or by running a virtual machine, such as Parallels Desktop (which I use) or VMFusion. I prefer the VM method, as I don't have to reboot using the handful of Windows applications that I use. And I can access my Windows apps just as I do my Mac apps - copy and paste between them, etc.
I just upgraded from Parallels 7 to 8 and I'm quite happy with it, running Mountain Lion on a late 2011 MBP with 16GB of RAM and a 512GB SSD. I also have a 27" Apple Thunderbolt Display and there are no problems with video drivers, etc.
If I were you - unless I needed every inch of performance that running Boot Camp can bring - I'd go with a VM to run Windows. I can attest to the functionality of Parallels - perhaps others with experience with other VMs will chime in.
Clinton

Applet with 2 methods with the same name in ie

Hi,
I have a problem with the Java 1.5 plugin for Internet Explorer .
When my Applet contains 2 methods with the same name but not the same return type, ie does not take the good return type.
Here is an exemple :
* Class TestApplet
package test.applet;
import java.applet.Applet;
public class TestApplet extends Applet {
     public void init() {
          System.out.println("init()");
     public void start() {
          System.out.println("start()");
     public String test(String s) {
          System.out.println("test(String) :" + s);
          return s;
     public boolean test(int i) {
          System.out.println("test(int) :" + i);
          return true;
}I have 2 methods test(), one returns a String and the other a boolean.
I use the following html code :
<html>
<head>
<script>
function test() {
     alert(document.DataAccess.test("hello"));
</script>
</head>
<body>
<applet WIDTH="500" HEIGHT="200" ID="DataAccess" NAME="DataAccess" CODE="test.applet.TestApplet">
</applet>
<div onclick="test()">test</div>
</body>
</html>
When I click on "test", the alert show "true" instead of "hello".
The problem only occurs with a JVM 1.5. It work fine with JVM 1.4.
Any idea ? Is it a bug ?
Thanks.

In your javascript method:
function test() {
alert(new String(document.DataAccess.test("hello")));
MSJVM and SUN jre use different conversion from javaScript objects to Java.
if you call from javaScript:
document.getElementById("myApplet").myMethod(22);
The method in MSJVM should look like this:
public whatever myMethod(Double d);
and SUN jre:
public whatever myMethod(Integer i);
The best thing to do is this:
public whatever myMethod(Object o);
               int col = 0;
               if (o.getClass().getName().toLowerCase().indexOf("integer") != -1) {
                    col = ((Integer) o).intValue();
               } else {
                    col = ((Double) o).intValue();
               }

How could I play and transmit a stream from the same camera

How could I play and transmit a stream from the same camera?

Hi,
As I said, you can use the method getVisualComponent() of the Processor to get a preview Window.
You create a Processor, prepare it to generate an appropriate output DataSource for what you want to do (saving, TXing, etc).
Then, for this Processor you extract an AWT Component where the stream will be previewed using the method getVisualComponent().
Some of the player examples in the JMF guide use this technique. I'm still not write my own player. I'm using an adaptation of the RTPPlayer, but I'm planning to use the above technique to create a Player where I can apply some effects to the stream and then save it if the user wants to.
If someone already did that, please, correct me if my procedure isn't right!
By the way, thanks for your help! I was using the DataSource returned from Manager.createCloneableDataSource only to create the clones. I was feeding my main Processor with the original DataSource. That was the problem!
RGB

Passing values between methods in the same class

Hi,
How to pass internal tables or values between methods in the same class.
How to check if the internal method in another method is initial or not.
How to see if the method has already been executed.
Thanks.

Just declare the internal table as an attribute in the class - that way every method in this class has access to it.
Since any method has access to all class attributes you can easily check if the internal table is initial or not.
I am not aware of any standard functionality if a method has already been executed or not, one way would be to declare a class attribute for each method and set it once the method has been executed. That way every method in that class would know which method has already been executed or not.
Hope that helps,
Michael

How do I call methods with the same name from different classes

I have a user class which needs to make calls to methods with the same name but to ojects of a different type.
My User class will create an object of type MyDAO or of type RemoteDAO.
The RemoteDAO class is simply a wrapper class around a MyDAO object type to allow a MyDAO object to be accessed remotely. Note the interface MyInterface which MyDAO must implement cannot throw RemoteExceptions.
Problem is I have ended up with 2 identical User classes which only differ in the type of object they make calls to, method names and functionality are identical.
Is there any way I can get around this problem?
Thanks ... J
My classes are defined as followes
interface MyInterface{
     //Does not and CANNOT declare to throw any exceptions
    public String sayHello();
class MyDAO implements MyInterface{
   public String sayHello(){
          return ("Hello from DAO");
interface RemoteDAO extends java.rmi.Remote{
     public String sayHello() throws java.rmi.RemoteException;
class RemoteDAOImpl extends UnicastRemoteObject implements RemoteDAO{
     MyDAO dao = new MyDAO();
    public String sayHello() throws java.rmi.RemoteException{
          return dao.sayHello();
class User{
   //MyDAO dao = new MyDAO();
   //OR
   RemoteDAO dao = new RemoteDAO();
   public void callDAO(){
          try{
          System.out.println( dao.sayHello() );
          catch( Exception e ){
}

>
That's only a good idea if the semantics of sayHello
as defined in MyInterface suggest that a
RemoteException could occur. If not, then you're
designing the interface to suit the way the
implementing classes will be written, which smells.
:-)But in practice you can't make a call which can be handled either remotely or locally without, at some point, dealing with the RemoteException.
Therefore either RemoteException must be part of the interface or (an this is probably more satisfactory) you don't use the remote interface directly, but MyInterface is implemented by a wrapper class which deals with the exception.

Null and empty string not being the same in object?

Hello,
I know that null and empty string are interpreted the same in oracle.
However I discovered the strange behaviour concerning user defined objects:
create or replace
TYPE object AS OBJECT (
value VARCHAR2(2000)
declare
xml xmltype;
obj object;
begin
obj := object('abcd');
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
obj.value := '';
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
obj.value := null;
xml := xmltype(obj);
dbms_output.put_line(xml.getStringVal());
end;
When creating xml from object, all not-null fields are transformed into xml tag.
I supposed that obj.value being either '' or null will lead to the same result.
However this is output from Oracle 9i:
<OBJECT_ID><VALUE>abcd</VALUE></OBJECT_ID>
<OBJECT_ID><VALUE></VALUE></OBJECT_ID>
<OBJECT_ID/>
Oracle 10g behaves as expected:
<OBJECT><VALUE>abcd</VALUE></OBJECT>
<OBJECT/>
<OBJECT/>
However Oracle 9i behaviour leads me to the conclusion that oracle
must somehow distinguish between empty string and null in user defined objects...
Can someone clarify this behaviour?
Thus is it possible to test if object's field is empty or null?

However Oracle 9i behaviour leads me to the conclusion that oracle
must somehow distinguish between empty string and null in user defined objects...
Can someone clarify this behaviour?
Thus is it possible to test if object's field is empty or null?A lot of "fixes" were done, relating to XML in 10g and the XML functionality of 9i was known to be buggy.
I think you can safely assume that null and empty strings are treated the same by Oracle regardless. If you're using anything less than 10g, it's not supported any more anyway, so upgrade. Don't rely on any assumptions that may appear due to bugs.

Ive lost my apple ID for my ipod, now i have an iphone and i want to use the same apple ID for both can someone tell me how to do this

I have lost my apple ID for my ipod, now ive got a new iphone and i want to use the same ID for both, can anyone one tell me how to do this? ( i no my ID for the iphone)

Just use the same ID.
These may alos help:
How to use multiple iPods, iPads, or iPhones with one computer
What is the best way to manage multiple...: Apple Support Communities

Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjus

Ok Apple users...Is there a way to delete e-mails on my Mac and not have to delete the same e-mails on my iPhone, and iPad...and vise-versa. I have the Cloud, and thought that everything would sync all of the time. If you know of a setting I need to adjust, please let me know.

Are you referring to @mac.com, @me.com or @icloud.com emails? Or some other email providers emails?
If the former, it should do that automatically. If the latter, no. iCloud does not (nor is it supposed to) sync non-Apple provided emails.

L2 and L3 Forwarding Method in the Same WAE

Similar Messages

Maybe you are looking for