Label misplacement after conversion or copying

Besides disappearing "cloned" property nodes, which seems solved in Labview 2012 (SP1), I also have a problem with misplacement of labels after conversions or copying.
The problem occurs at least in the following situation:
1. There is a property node of a control.
2. The control is defined in a "Type Def".
3. A label is attached Right-Centered of the property node.
4. The location of the Label in the "Type Def" is different (Top-Left, for instance).
5. To create the bug either the source is converted (e.g. Labview 2011 to Labview 2012) or the property node is copied between sources.
6. The label of the converted/copied property node now has moved upwards, above the property node.
In Labview 2012 the solution for disappearing "cloned" property nodes also fixes the label misplacement bug for those property nodes.
The misplacement of labels can be quite annoying when you have relatively compact code in many multiple stacked sequences and event handlers.
I also had a seperate, global problem with label placement after the label font is changed / converted, but have not yet verified if this still happens in Labview 2012.
Solved!
Go to Solution.

billko wrote:
Ettepet wrote:
I started this topic to get this bug (these bugs) acknowledged and (hopefuly) fixed in the (near) future, but sofar nothing. I emailed someone who entered the two bugreports I mentioned:
CAR #318066 -- Implicitly typed property node Value does not retain the typedefness of the original control
CAR #318065 -- "Find" popup problems on implicitly linked property/invoke nodes when original control is a typedef
...but have heard nothing back after an initial reply asking me for the CARs (and my reply to that) several days ago.
It amazes me that none here seem to have problems with labels being misplaced by Labview, as it has been doing so for several years (at least) and it effectively wrecks the layout of your code.
...Or maybe we just gave up...
Well, I got hope after seeing many instances [where the bug used to occur] fixed in LV2012 because of the CARs I mentioned in my previous post. The bug mentioned in the OP should be readily fixable for ALL instances in a very similar manner.
I would be very happy if a CAR was created for this.

Similar Messages

Activating data in DSO got dump SAPSQL_EMPTY_TABNAME after BW system copy

Hi all,
We had an issue after system copy.
After a system copy the data in the standard DSOs(all of them) cannot be activated. The DOSs themselves are active, the transformations are active but if one attempts to load data and activate u2013 it does not work. The job terminates with shortdump SAPSQL_EMPTY_TABNAME.
Found the issue is caused by u201Cmore than one versionu201D of the change log.
We tried the Program RSAR_RSTSODS_CHANGELOG_VRS but it didn't work.
We had the solution like this:
After activating the DSO itself(the object) using RSDG_ODSO_ACTIVATE the issue disappears and the data can be activated. Issue also disappears. BUT Drawback: Activating the DSO causes the transformations to deactivate.Then we used the program RSDG_TRFN_ACTIVATE to activate all transformations. And then the issue disappeared.
Want to know what the root cause for this. From some SDN threads, mentioned BDLS job in the post refresh steps are not correctly done during system copy may cause this issue. How did the BDLS run wrongly cause this issue? And what is the exact correct way? We ran BDLS for each source systems inlcuding the target refreshed BW system itself by the default selection - conversion of Client-Dependent and Client-Independent Tables; because we used database copy
for the system refresh.
We also restored all source systems in RSA1 inlcuding the refreshed BW system own in the post-refresh steps.
Thank you very much for your information and suggestion.
Heming

Hi Arun, as you say two change log tables it´s strange. In fact in my opinion it´s not right but the problem is that the second change log table appears after executing std SAP report RSDG_ODSO_ACTIVATE in order to be able to activate the DSO. So the solution provided by SAP it works but i´m not sure if the right one. Besides this the original change log table is full of data while the second one is empty... for new loads which are gonna a be filled by the activation process ? I suppose the second one... will this have some impact with the data stored in the first one... not in theory but.... i do not feel confortable with the consequences of this report.
And the most important, it seems that the reason why the DSO and the change log table had problems is due to a some problems or missing steps after executing the BDLS after BW system refresh but nobody can confirm this point...
So, i´ve been able to solve the issue but now i have two change log tables for the same DSO.
Anybody has the same situation after executing the above mentioned SAP std report ?
Regards,
Joaquin Casas Baca-Castex

Retain the metadata associated with a doc after conversion to pdf

I am using word automation service to convert word document to a pdf in a sharepoint 2010 document library. however after the conversion of the document from word to pdf the associated metadata is lost. (i.e the converted document which is added to the library doesn't retain
the old metadata like duedate,doc id etc...)
Can someone help me how to retain the metadata associated with list after conversion of document to PDF.
I am using one ItemAdded event reciever in which when I am trying to looping out the library in which all word documents are there, I am not getting the last updated document that got converted into pdf.
Code which I am using is below: Here destContenttype is content type of the the document and destFilename is file name of the document.
SPListItemCollection newLstItms = lstNonPublishLst.GetItems(newSqlQuery);
                foreach (SPItem newItem in newLstItms)
                    if (newItem["Content Type"].ToString() == destContenttype && newItem["Name"].ToString().Split('.')[0] == destFileName[0])
                        properties.ListItem["Document Number"] = newItem["Document Number"];
                        properties.ListItem.SystemUpdate();
                        break;
Please advise, it is really urgent.
Thanks in Advance

I have worked on copying SharePoint meta data (and painfully fine tuning it to deal with all exceptions, 3rd party apps and content types) for the last 8 years. Not full time though :-)
It is part of a commercial product that does PDF Conversion in SharePoint and takes great care of dealing with meta data. Have a look at
this blog post.
Apologies for the shameless plug, but as you are in a hurry it may be the best, and most reliable, solution.
Disclaimer, as I mentioned I worked on this product so consider me biased.

Videos too heavy after conversion (Zen V Pl

Hi everybody. I bought a MP3 Player Zen V plus. My problem is that I have to convert the videos before to put them on the MP3 Player. But after conversion, the videos become too heavy, so that I can't by example put a divx movie on the player (If a divx movie is 600 mo before conversion, he is 2 go after conversion.)Can anyone help me ?Thanks. PS : Sorry if my english is bad, I am french and that's difficult for me.

Sorry, I should have included an English version as well.....it basically says try PocketDivx (my preference) or SuperC. I forgot the Zen V Plus uses a uncompressed AVI....the direct copy?option within PocketDivx may work....may not. ---------------- - As HHS points out, the Zen V Plus uses a uncompressed AVI format. If you try PocketDivx, in the advance options, there is a option to direct copy the video and audio stream...this may work. Comme HHS fait remarquer, le V zen Plus utilise un format de AVI sans compression. Si vous essayez PocketDivx, dans les options d'avance, il y a une option pour diriger la copie le vid?o et le ruisseau audio. ..this peut travailler.Message Edited by Locknar on 04-20-200707:4 PM

I backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

i backup my iphone on my pc and copy backup file into drive D then i setup new OS on my pc. after that i copy the backup file into itunes backup folder but itunes can't find the backup file to restore my iphone. how can i restore my iphone?

Don't you just love changes in interfaces?
I found the answer to my question.
When you attach a device (iPhone, iPad) to your Mac, in iTunes 12 in appears as a tiny icon in the second "row" of the iTunes display. Click the icon and the familiar iTunes display for the device appears. From there, on the Summary screen, you can see the dates of the backups of the device (iCloud and backup to the computer). You can also use the button to backup to the computer.

ST02 shows multiple servers after heterogenous system copy

We're facing a strange behaviour in ST02 after a system copy using MaxDB backup/restore with SWPM (backup was from our production system). When we click on history, no data is shown:
We have to click on "-> Server", then the data is shown:
Does anyone know how to make history work?

Hello Alwina,
Thanks for the help.
Mine is EHP7 NW 7.4, standard system, cent serv instance(Mes Serv & Enqueue server), primary app server (Dia Bg Up Spo) runs on the single host along with Oracle DB 11.2.0.4.
In my rest of the systems also I have the same notations, server name its in upper case and hostname is in lower case (ofcourse they are of other netweaver release) for SM51.
niping results
Hostname/Nodeaddr verification:
===============================
Hostname of local computer: EUSAPADHR01                      (NiMyHostName)
FQHN of local computer: EUSAPADHR01.dfs                      (NiGetOwnFQDN)
Lookup of hostname: EUSAPADHR01                              (NiHostToAddr)
    --> IP-Addr.: 10.170.83.88
Lookup of IP-Addr.: 10.170.83.88                             (NiAddrToHost)
    --> Hostname: eusapadhr01.abc
Lookup of hostname: EUSAPADHR01                              (NiHostToAddr)
    --> IP-Addr.: 10.170.83.88
Lookup of IP-Addr.: 10.170.83.88                             (NiAddrToHost)
    --> Hostname: eusapadhr01.abc
Yes initially it gives 8 characters in the text.
But in the actual values it is like eusapadh_HRP_40..
Hope you understand my case.
Ok so implementing the note would fix this ST02 history issue - confirm?

Page numbers incorrect after conversion from Excel to pdf

Page numbers incorrect after conversion from Excel to pdf
""This above link (thread:834599) is from a case back in 2011 that claims to solve this problem, but it does not solve this problem. I think that customer only cared about having continuous page numbering, not discrete page numbering per sheet.
========================
I still have this issue in Acrobat XI and MS Office Professional Plus 2010. I keep upgrading to no avail. This regression has resulted in a huge time drain for me. If you fixed it, please explain how I can get my hands on the resolution.
Previous versions of Excel and Adobe Acrobat enabled flexibility around the "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) token, depending on context and usage. The "# of pages" token could represent EITHER the number of pages in the workbook OR the number of pages in the tab/sheet, depending on how you generated the PDF:
You could select "Selected Sheets" and then select all or some of the individual sheets in the workbook, and the PDF would honor the discrete numbering of each of the sheets, so the first page of each sheet was p1 and the "# of pages" was the number of pages in the sheet; not the number of pages in the workbook; or
You could select "Entire Workbook" and the PDF would honor continuous page numbers across all sheets, as a single document.
Now, it only honors the total number of pages in the workbook, regardless of the method you use to publish to PDF: saving as PDF, printing to PDF, using "createPDF" from Acrobat plugin to Excel's menu ribbon; selecting all sheets, some sheets, or Entire Workbook; automatic First page number or "1" under Page Setup > Page> First page number. (This last option, btw, does restart every sheet at p1, but it hardly makes sense if the total number of pages is still the total number in the workbook instead of the number in the sheet.)
I spent a lot of time trying each which way that the blog posts recommended and have tried this on multiple versions of Excel and Acrobat now.
NONE of these time-consuming experiments gave me what I wanted.They all insist that "Page #" of "Number of Pages" (Page &[Page] of &[Pages]) is the total number of pages in the workbook or the total number of pages in the selected sheets combined.
The numbering are correct in Excel Page Layout.
The same issue happens when using LibreOffice calc. (Although, I never tested with Libre Office before, so I don't know that it ever worked).
The workaround now is to create PDF for each spreadsheet one at a time, and then compile them using the Acrobat combine/binder feature. All alternatives are extremely time consuming and tedious. It used to be automatic. This is a major regression that has gone untreated for over a year now, maybe two years.
My task takes infinitely more time to complete than it did with previous versions of Acrobat. That means that days are added to my project, when the functionality used to enable a quick pdf generation that was ready for review, now I have to do this very manual time-consuming set of steps to generate a draft. As the project has grown and more tabs are added, my pdf-generation task takes that much longer. We require lots of drafts. It used to be easy and fast. Now it is hard and time-consuming.
In my opinion, the problem is not Excel; it is Acrobat because it was introduced with an upgrade in Acrobat, not an upgrade in Excel. The problem was introduced in Acrobat 9 or 10. Please provide a patch or add-on or something.

If you are setting up the page numbers in Excel, the resulting PDF would display the the page numbers created in Excel. On Excel 2010 support page, (http://office.microsoft.com/en-us/excel-help/insert-and-remove-page-numbers-on-worksheets- HA010342619.aspx#BM2) is stated the following "tip" which indicates by default Excel 2010 starts numbering each tab with 1. Exel's workaround tip is below -
Set a different number for the starting page
Tip To number all of the worksheet pages in a workbook sequentially, first add page numbers to all worksheets in a workbook, and then use the following procedure to begin the page number for each worksheet with the appropriate number. For example, if your workbook contains two worksheets that with both be printed as two pages, you would use this procedure to begin the page numbering for the second worksheet with the number 3.
On the Page Layout tab, in the Page Setup group, click the Dialog Box Launcher next to Page Setup.
On the Page tab, in the First page number box, type the number that you want to use for the first page.
Tip To use the default numbering system, type Auto in the First page number box.
Also helpful in the same section is the note on viewing page numbers. To see if the page numbering dilemma originates in Excel make sure you are using the Page Layout View see below:
Hide All
If you want numbers shown on pages when you print a worksheet you can insert page numbers in the headers or footers of the worksheet pages. Page numbers that you insert are not displayed on the worksheet in Normal view — they are shown only in Page Layout view and on the printed pages.
Overall it may be easier not to create the page numbers in Excel but instead create then in Acrobat using the Headers and Footers option in Acrobat. I hope this helps - it sounds like a frustrating issue you are experiencing.

User password not taken in consideration after a company copy

Hi All,
After a company copy, user passwords are not replicated; we´re only able to connect with manager and then reset all passwords.
Is there anything to do to avoid this?
Thanks!

Hi.
When you use the Copy Express function, it copies data from one database to another.
I also do believe that when using Copy Express, all passwords for users are reset and needs to be added manually before entering the new company for the first time.
Kind Regards,
Runar Wigestrand.

Logical system on QAS after remote client copy from PRD to QAS

I wander after remote client copy from PRD to QAS do I have to change Logical system on QAS. Do I have to run some postprocessing program?
Thank you in advance

Hi Branko,
After the system copy, go to transaction SALE -> Sending and receiving Systems -> Logical systems -> Define Logical System , click New Entries and create a new logical system for your QAS; then go to SALE -> Sending and receiving Systems -> Logical systems -> Assign Client to Logical System, click on the client, click change and assign the new Logical system.
Other activities, check Jobs, RFC's, etc...
Regards
Juan
Please reward with points if helpful

File erased after attempt to copy it to another MacBook Pro

Hi everybody!
After trying to copy a video to a friend's MacBook Pro, my own video has disappeared from my own MacBook Pro, and wasn't copied on his. Any clue? File Salvage was of no help to retrieve the lost video...I had used ethernet connection to link both laptops. I copied other stuff onto his and all went perfectly OK except for that first failure.
Any suggestions welcome! Thanks for any help,
Berlugana

Hey guys,
So this is follow up from my debarkle with the EDD. I found out my problem with copying files from Mac to EDD and vice versa was a result of a not so good EDD ( i had an apollo hard drive from imation) that was not very compatible with macs. So i did my research and found out that the best hard drives were Western Digital and Seagate. I bought the newest western digital EDD 1TB and formated it to FAT32 and guess what...no problems so far. The only problem is that FAT32 format doesn't copy files larger than about 4 gigs so i couldnt copy a movie from my brothers computer onto my EDD that was 1080p. You could probably resolve that by partitioning a small part of your hard drive in ExFAT? but yeah, hopefully that helped guys.
Aaisha

How to stop jobs after a system copy

Hi All,
After doing a system copy from the Production system to some test system, all the jobs that are supposed to be triggered in the production server will also trigger in the test system which is not good.
For example, If we have a payroll running every month. After i do a system copy the same payroll will also be triggered in the test server which is un acceptable.
How do we go about it and what are all the steps that we need to follow after a system copy?
Points will be rewarded.
Thanks
Vijay

Hello Vijay,
you surely need background processes in a running system.
But you can start a SAP system without any background processes.
When the system is up you go to sm37 and delete (or de-release) all the jobs you don't need in the target system. Then set the number of batch processes to the amount you want and restart the system.
Alternatively you can prepare your source system accordingly with the SAP System Copy Guide - Section 3.2 Technical Preparations:
"Set all released jobs from Released to Scheduled:
Tools -> CCMS -> Background Processing -> Jobs - Overview and Administration (transaction SM37)
You also need to do this for jobs that must run periodically (see SAP Note 16083).
Select all jobs (include start after event) as follows:
Job -> Released -> Scheduled"
I think the best way for you is to read this guide!
Everything is explained very well there.
Goto:
https://service.sap.com/systemcopy
In the left tree select:
-> SAP Netweaver
-> SAP Netweaver in Detail
-> Software Life-Cycle Management
-> System Copy & Migration
-> Media Library
There are all the Guides for the current releases.
Regards, Michael
Message was edited by:
Michael Teubner

Post-actions for Kpro-Content Server after Sap DB Copy

We have a Sap system based on Web As 6x connected to a Sap Content Server to store originals.
We copied back this Sap system to the quality system.
Now the Sap quality environment refers to the same Content Repository of the production, and we want to modify this.
From this environment it should not be possible to access or to modify the originals of the production.
More in general, wich post-actions can be done on the Sap target system after a DB copy where the source system is connected to a Content Server ?
For example, which tables can be cleaned up ?
regards

Hi,
Pls see the below link if this can help you.
http://help.sap.com/saphelp_nw2004s/helpdata/en/8d/3e704c462a11d189000000e8323d3a/content.htm
Anil

Inconsistant transport requests after local client copy

Dear experts,
our IT department just made a local client copy with profile SAP_ALL, by which all the transport requests had been copied, too, including quite a lot of workbench and customizing orders in status changeable. I'm supposed to do some basic setup and cleanup in the new client, but I'm confronted with problems like objects being locked in orders/requests that cannot be changed in the new client, as they belong to the original source client.
How can I get rid of those inconsistencies? I'd preferred the new client without transports and without locked objects. Is it really necessary that I clean up this mess manually? Would it have been better to clean this up before the client copy? Or could we just do the client copy with another profile in order to avoid those problems?
Thanks for your appreciated help
Andreas

Hello,
Transports are NEVER part of a client copy.
In fact all the data of your transports is stored in tables that are client independent (E07* tables).
This means that you can view (not edit) always all transports from all clients in a specific system.
When you want to edit or release a transport the source client is important (in which client was the transport originally created).
This is stored in table E070C for all transports and can not be overruled.
So I recommend that you don't clean anything related to transports after a client copy because this will also impact the other clients !
Success.
Wim

Incorrect displayed pictures after conversion docx- pdf

Hello,
I use Acrobat X Pro and I want to create a PDF using the "Create PDF" function in Acrobat itsself.
In the word document there are excel charts. But they are insert from excel to word as graphic! The charts have some table elements filled with stripe patterns.
But after conversion it looks like that:
Any idea?
Thank you very much in advance!

I ran these in AA 9.5 with a print from WORD. The settings file was set to my default of the IEEE publications settings (for Journals). You could also try press or print settings. The standard and smallest size settings do not do very well for a lot of graphics. Any way here are the two pages captured on screen at 200%. I can try AA XI if you like.
and
I redid the experiment with AA XI. Unfortunately on this machine I do not have OFFICE, but have LibreOffice. I am including the results or printing to the Adobe PDF printer from LibreOffice. I have cut and pasted the view of both pages (as in your PDF).
and
Actually, the LibreOffice version looks better to me than the MS version. For some reason the second table seems messed up, but that is how it looks in LibreOfffice also. I do not use LibreOffice much and so I may have not done some things correctly. However, that gives you another view.

Derivation Rule Problem After A Client Copy

Hello,
Has anyone ever encountered a problem with derivation rules after a client copy is performed? After a client copy, we have "some" FM and GM derivation rules (not all of them) that have to be manually copied from the source to the target client (line by line by line by line). I'm thinking that there has to be a way to prevent this since some rules are fine after the clent copy. Your input would be greatly appreciated.
Will

I believe that we have resoved our issue. For the derivation rule values that would never copy, we re-created these again starting in DEV and transported the derivation rules throughout the entire landscape (QAS and PRD). Evidently some derivation rules (and the related values stored in the tables) were created directly in Production. During a client copy the values in the tables for the derivation rules that were created directly in our Production environment would not copy to our QAS environment. Those rules were stored in a table named FMFMOAPRD1000122. Note that PRD is in the table name. After re-creating the rule and transporting it through the landscape, the table was named FMFMOADEV1000152 (for example).

Label misplaceme​nt after conversion or copying

Similar Messages

Maybe you are looking for

Label misplacement after conversion or copying