Label properties and custom class

I want to make the following persistent: <mx:Label useHandCursor="true" buttonMode="true" mouseChildren="false" />
I have tried to create a custom class that extends the Label class, but can't get the syntax right.
override protected ???
buttonMode=true;
I don't think that I want to override a function.  It seems to me that I want to override a property or attribute of the Label class.
Can anyone give me any guidance?

Hi
As you need Lable with default property {  useHandCursor="true" buttonMode="true" mouseChildren="false" }
I have extend the Label you can do it in directly in constructor by setting the value
------------- Custom Label Class ----------------------------------
package
    import mx.controls.Label;
    public class CusLbl extends Label
        public function CusLbl()
            super();
            super.buttonMode = true;
            super.useHandCursor = true;
            super.mouseChildren = false;
You can directly use in application or in any other container with default property;
Ckeck attached file if needed.
With Regards
Virat Patel

Similar Messages

  • How to find master data info objects. Partner function and customer class.

    hi,
    Can you please tell me what are the available extractors for Partner Function (PARVW from VBPA)and Customer Class (KUKLA from KNA1).
    I hope these fields are master data. I checked in 0customer. But I didn't find it. There is a info object (Business partner). Is it the same?
    pls reply

    I will admit that I am not familiar with ECC and there may be different interpretations of what KUKLA means and different means of extracting Customer information to/from ECC.
    However, for us, when extracting Customer Attributes using the 0CUSTOMER_ATTR datasource in R/3, we map KUKLA to 0CUST_CLASS.  They are both set up as 2 CHAR.  That is not to say that you should also.  You can map it to a custom infoobject in BW as long as you set it up as an attribute of 0CUSTOMER.  KUKLA is available in the standard datasource 0CUSTOMER_ATTR in R/3.  When looking at what is available in the infosource for 0CUSTOMER in BW, 0CUST_CLASS is a logical choice to map.
    As far as VBPA-PARVW, VBPA is not a source for master data for 0BPARTNER.  VBPA contains the business partners associated with Sales documents.  So if you are going to create a data provider (cube/ODS) in BW and VBPA-PARVW is part of the transactional datasource in R/3, the you can map it to 0BPARTNER in your cube/ODS.
    Hope this helps.

  • [JNDI] getSchema and custom class

    Hello.
    I got a problem with getSchema().
    When I trie to get schema from out-of-box classes, it's allright, but when I do this for custom class, I get a exception :
    javax.naming.NameNotFoundException: xxxPerson; remaining name 'uid=john.doo.XXX.fr,ou=XXX,dc=XXX,o=XXX,c=fr'
    However, this classe it's correctly defined.
    Someone has or had the same stuff ?
    ---- Code ----
    /... right env setup .../
    DirContext ctx = new InitialDirContext(env);
         //          Get the schema tree root
              DirContext schema = ctx.getSchemaClassDefinition("uid=john.doo.XXX.fr,ou=XXX,dc=XXX,o=XXX,c=fr");
         //          List the contents of root
              NamingEnumeration bds = schema.list("");
              while (bds.hasMore()) {
                   System.out.println(((NameClassPair)(bds.next())).getName());
              }

    Hello.
    I got a problem with getSchema().I add I have not the problem with OpenLdap :/

  • Custom classpath and custom jar entry in R12

    Hi all,
    I have created the custom classpath and custom jar file for isrore process. I had put custom jar and custom class entry in orien_application.xml file. But it was working on R12 at doveloper mode. It will creates the classes for custom jsp file using custom import class or custom jar. But once i revert back the devloper mode means it won't work.
    Could you please help..

    Oracle apps R12 - Compiling JSP with custom classpath
    We all know that to compile JSP manually on the Oracle Application R12 instance, we need to run the file $FND_TOP/patch/115/bin/ojspCompile.pl.
    Its help is as follows:
    syntax: ./ojspCompile.pl COMMAND {ARGS}
    COMMAND --compile               update dependency, compile delta
    --create                rebuild entire dependency file
    -delta.out update dependency, list delta to file
    -dep.out update dependency, output heirarchy to file
    ARGS -s matching condition for JSPs filenames
    -p number of parallel compilations
    -log to override logfile from ojspCompile.conf
    You are
    recommended to set the log file location
    outside of any network file system shared (NFS) area/drive.
    -conf to override ojspCompile.conf
    --retry         retry previously failed compilation attempts
    --flush         forces recompilation of all parent JSPs
    --quiet         do not provide an actively running progress meter
    --fast          instantly fail jsps that are possibly invalid
    example1: ojspCompile.pl compile -s 'jtf%' -p 20 retry
    example2: ojspCompile.pl compile -s 'jtflogin.jsp,jtfavald.jsp' flush
    example3: ojspCompile.pl compile fast --quiet
    If your JSP uses custom classes, then compiling jsp manually can fail if proper classpath is not set. Yes, even though if you have setup the classpath correctly in orion-application.xml, it will fail because this jsp compile utility does not read orion-application.xml classpath.
    So, the problem is to identify where to set the classpath so that above utility can pick it up. After several search and looking into code, I found following:
    By default, the jsp compiler script uses following configuration file
    $INST_TOP/appl/admin/ojspCompile.conf
    This conf file has a classpath field in it which is usually pointed to file
    $INST_TOP/appl/admin/ojspCompile.properties
    This property file lists the classpath used for JSP compilation.
    So if your classes are not listed in this file, your jsps will not compile by ojspCompile.
    Ofcourse, you can always set the "main_mode" to "recompile" in orion-web.xml, but that for production you do not want to change it and compile the JSP on file deployment.
    References:
    458338.1 How to Enable Automatic Compilation of JSP pages in R12 Environment
    433386.1 JSP Pages Hanging in R12 After Removing Cached Class Files in _pages
    783094.1 Compile jsp files at Application R12 at Windows

  • Basic Custom class

    I have a blank FLA. with document class index.
    I have an AS file name index saved in same folder. My custom
    package looks like this, but the movieClip does not display at
    runtime. I'm just trying to begin work with OOP and custom classes
    and I'm not sure why this isn't working for me:
    package {
    import flash.display.MovieClip;
    public class index extends MovieClip {
    public function Main () {
    var D:MovieClip = new dMC();
    D.x = D.y = 100;
    addChild(D);
    }

    Hi,
    If you want D to show up without doing anything in your .fla,
    the Main() function should actualy be the contructor of index:
    public function index() {}
    But if you did trigger Main() in your .fla, the problem comes
    from you dMC class.
    Also, just for the form, know that an AS3 convention suggests
    that all class names should begin with a capital letter
    (Index.as)...

  • How to set buildID.xml and custom.properties in SDK

    Hello,
    I just completed a new build deployment of SAP ME5.2, because after I deployed the new version, I don't think I have set a
    correct version number.Can you someone give me a sample how to set the buildID.xml and custom.properties? I am a new on the SAP ME5.2
    The Base version is ME_Base_5.2.5.16.5_netweaver-71_Update.zip and
    MEClient_Base_5.2.5.16.5_netweaver-71_Update.zip. the HB customzation
    version is ME_xxxxxx_2.0.0.0.x_netweaver-71.
    Within the sap note 1484551, you mentioned we need change the
    SDKInstallDir/build/buildID.xml file, here is the context of the file:
    buildID.xml -
    <?xml version="1.0" encoding="UTF-8"?>
    <buildID xmlns:xs="http://www.w3.org/2001/XMLSchema">
    <customer>XXXXXX</customer>
    <revision>1.0.0.0</revision>
    <build>1</build>
    </buildID>
    buildID.xml -
    1. how can we change the revision and build?
    There is another file BuildToolDir/build/script/custom.properties, here
    is the file context:
    custom.properties----
    This file contains build properties used to configure the build
    system.
    The name of the software vendor implementing the customizations.
    vendor.name=xxxxxxxxx
    Vendor build identifier. This value is used to uniquely identify
    customizations built by a particular vendor for a particular customer
    and base
    application version.
    This is also used in path locations and in naming certain build
    artifacts, like the custom EJB module and the utility classes archive.
    vendor.id=xxxxxxxxx
    The installation of the J2EE engine installed in the development
    environment.
    ex. C:/usr/sap/CE1\J00
    j2ee.instance.dir=J2EEInstanceDir
    The web context path used to access the main web application. This
    is used by the build to set the
    context-root value in application.xml after an update has been
    imported.
    web.context.path=
    The web context path used to access the production XML interface web
    application. This is used by the build to set the
    context-root value in application.xml after an update has been
    imported.
    xml.context.path=
    The web context path to access resources from the web extension
    application, like images and work instruction HTML files.
    web-ext.context.path=web-ext
    The target database vendor. Valid values are 'oracle' or 'sqlserver'.db.vendor=ORACLE
    The JDBC driver configured for the application server.
    db.drivername=VMJDBC
    JDBC connection propertes for the WIP (Work In Process) database.
    This is the primary application database.
    db.wip.driverclassname=
    db.wip.driver.url=
    db.wip.host=
    db.wip.port=
    db.wip.sid=
    db.wip.user=
    db.wip.password=
    JDBC connection propertes for the ODS (Open Data Store) database.
    This is the offline reporting and archiving database.
    db.ods.driverclassname=
    db.ods.driver.url=
    db.ods.host=
    db.ods.port=
    db.ods.sid=
    db.ods.user=
    db.ods.password=
    Flag indicating whether to add DPMO NC codes to NC idat files when a
    new update is imported. This value is initially
    set by the installer according the the user selection.
    dpmo.nc.codes=
    The default locale used by the production system. The default locale
    is the locale used to display locale
    specific text and messages when the requested locale is not
    available. This property does not need to
    be set if the default locale is english.
    default.locale=en
    Used when running the build from Eclipse to locate the java compiler
    used by the WebLogic EJB compiler.
    jdk.home=C:/Program Files/Java/jdk1.5.0_20
    Compiler debug mode. If set to 'true', debug symbols will be
    compiled into the byte code.
    compile.debug=true
    Keystore alias
    security.alias=xxxxx
    Keystore password
    security.storepass=ChangeIt
    Key password
    security.keypass=ChangeIt
    Keystore type (jks=default,jceks,pkcs12)
    security.storetype=jks
    Optional source control build identifier that is to be displayed with
    standard version information.
    scs.build.ID=
    Optional extended version information to be displayed with standard
    version information.
    ext.info=
    custom.properties----
    2. How can we change this here?
    Regards,
    Leon Lu
    Edited by: Leon Lu on Aug 4, 2011 11:14 AM
    Edited by: Leon Lu on Aug 4, 2011 11:21 AM

    Hi,
    I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
    You can do this in compound layout.
    Regards,
    Stefan

  • Need help calling and looping custom classes

    Hi, I am writing a code with custom classes in it and another program that calls upon all of the classes in the first program. I can get the second one (L6) to call upon and execute all of the classes of the first (Foreign). However, I need the second one to loop until quit is selected from the menu on Foreign and I can't seem to figure out how to do it. Here are the codes:
    L6:
    public class lab6
    public static void main(String[] args)
    Foreign camount = new Foreign();
    camount = new Foreign();
    camount.get();
    camount.print();
    camount.intake();
    camount.convert();
    camount.vertprint();
    System.out.println(camount);
    Foreign:
    import java.util.Scanner;
    public class Foreign
    private String country;
    private int choice;
    private float dollars;
    private float conversionValue;
    private float conversionAmount;
    public Foreign()
    country = "null";
    choice = 0;
    dollars = 0;
    conversionValue = 0;
    conversionAmount = 0;
    public void get()
         Scanner Keyboard = new Scanner(System.in);
              System.out.println("Foreign Exchange\n\n");
    System.out.println("1 = U.S. to Canada");
    System.out.println("2 = U.S. to Mexico");
    System.out.println("3 = U.S. to Japan");
    System.out.println("4 = U.S. to Euro");
    System.out.println("0 = Quit");
    System.out.print("\nEnter your choice: ");
    choice = Keyboard.nextInt();
    public void print()
    System.out.print("\nYou chose " + choice);
    public void intake()
         Scanner Keyboard = new Scanner(System.in);
              if (choice >= 1 && choice <= 4)
    switch (choice)
              case 1: System.out.println("\nU.S. to Canada");
                        conversionValue = 1.1225f;
                        country = ("Canadian Dollars");
                        break;
              case 2: System.out.println("\nU.S. to Mexico");
                        conversionValue = 10.9685f;
                        country = ("Mexican Pesos");
    break;
              case 3: System.out.println("\nU.S. to Japan");
                        conversionValue = 118.47f;
                        country = ("Japanese Yen");
    break;
              case 4: System.out.println("\nU.S. to Euro");
                        conversionValue = 0.736377f;
                        country = ("European Union Euros");
    break;
                   System.out.print("\nEnter U.S. dollar amount: ");
              dollars = Keyboard.nextFloat();
    public void convert()
    conversionAmount = conversionValue * dollars;
    public void vertprint()
    System.out.println("\nCountry = " + country);
    System.out.println("Rate = " + conversionValue);
    System.out.println("Dollars = " + dollars);
    System.out.println("Value = " + conversionAmount);
    public String toString()
    String line;
    line = "\n" + country + " " + conversionValue + " " + dollars + " " + conversionAmount;
    return line;
    I appreciate any help anyone can give me. This is driving me crazy. Thanks.

    1. first you need to write method to get choice value from Foreign class.
    simply add this method.
       public class Foreign {
          // ... Add this
          public int getChoice() {
             return choice;
       }2. Then in your main, you can obtain with previos method.
    public static void main(String[] args) {
       Foreign camount = new Foreign();
       // remove this. you alredy create an instance in last statement.
       //camount = new Foreign();
       int choice = 0;
       do {
          camount.get();
          choice = camount.getChoice();
          // your process...
       } while (choice != 0);
    }

  • Build app with ODT and Oracle UDT - Error while creating custom class

    Hello CShay,
    I am testing you sample code to create UDT with ASP.Net app. It is also published in Oracle magazine.
    The article is also published at following link:
    http://www.oracle.com/technology/oramag/oracle/08-may/o38net.html
    I am able to successfully implement all the steps before "Using Custom Class Wizard". When I right click on any of the object (CUSTOMER_OBJ, PHONELIST_OBJ, and ADDRESS_OBJ) and select Generate Custom Class, I get the following error:
    Oracle custom class wizard.
    Class can be generated only for either C#, VB or Managed C++ projects.
    Am I missing any thing?
    Thanks in advance for your help.

    Yes I confirm that I choose File->New Website.
    I don't see the following option
    File -> New Project, and then under Visual C#, select ASP.NET Web Application
    I am using VS2005 Professional Edition.
    The options I see under Visual C# are:
    If I click on
    Windows tab:
    Windows Application
    Windows Control Library
    Console Application
    Empty Project
    Class Library
    Web Control Library
    Window Servcie
    Crystal Report Application
    and Search Online Templates in My Templates tab.
    Couple of options for Smart Device which also doesn't include ASP.Net
    then Database, Starter kits and Office tabs which also doesn't include ASP.net thing.
    I don't know how did you see that option or you might be using different version of VS (Enterprise).
    But right now I am stuck.
    Please provide me your valuable comments.
    Thanks for your help.

  • Reg:Table for Custom Messages and custom Messaege Classes

    Hi ,
    My requirement is to find out all custom messages . so can any one tell in which tables all custom messages and custom message classes are stored .
    Thanks & Regards,
    Lakshmi.

    hi,
    You can checkthese tables listed below,
      T100                             Messages
      T100A                            Message IDs for T100
      T100C                            Message Control by User
      T100O                            Assignment of message to object
      T100S                            Configurable system messages
      T100SA                           Application Areas for Configurable Messages
      T100T                            Table T100A text
      T100U                            Last person to change messages
      T100V                            Assignment of messages to tables/views
      T100W                            Assign Messages to Workflow
      T100X                            Error Messages: Supplements
      T100ARBGB                    Application Area
    But The main table for storing all the message classes and their numbers are stored in table
    T100

  • Custom class loader and local class accessing local variable

    I have written my own class loader to solve a specific problem. It
    seemed to work very well, but then I started noticing strange errors in
    the log output. Here is an example. Some of the names are in Norwegian,
    but they are not important to this discussion. JavaNotis.Oppstart is the
    name of my class loader class.
    java.lang.ClassFormatError: JavaNotis/SendMeldingDialog$1 (Illegal
    variable name " val$indeks")
    at java.lang.ClassLoader.defineClass0(Native Method)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:502)
    at java.lang.ClassLoader.defineClass(ClassLoader.java:431)
    at JavaNotis.Oppstart.findClass(Oppstart.java:193)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
    at JavaNotis.SendMeldingDialog.init(SendMeldingDialog.java:78)
    at JavaNotis.SendMeldingDialog.<init>(SendMeldingDialog.java:54)
    at JavaNotis.Notistavle.sendMelding(Notistavle.java:542)
    at JavaNotis.Notistavle.access$900(Notistavle.java:59)
    at JavaNotis.Notistavle$27.actionPerformed(Notistavle.java:427)
    JavaNotis/SendMeldingDialog$1 is a local class in the method
    JavaNotis.SendMeldingDialog.init, and it's accessing a final local
    variable named indeks. The compiler automatically turns this into a
    variable in the inner class called val$indeks. But look at the error
    message, there is an extra space in front of the variable name.
    This error doesn't occur when I don't use my custom class loader and
    instead load the classes through the default class loader in the JVM.
    Here is my class loading code. Is there something wrong with it?
    Again some Norwegian words, but it should still be understandable I hope.
         protected Class findClass(String name) throws ClassNotFoundException
             byte[] b = loadClassData(name);
             return defineClass(name, b, 0, b.length);
         private byte[] loadClassData(String name) throws ClassNotFoundException
             ByteArrayOutputStream ut = null;
             InputStream inn = null;
             try
                 JarEntry klasse = arkiv.getJarEntry(name.replace('.', '/')
    + ".class");
                 if (klasse == null)
                    throw new ClassNotFoundException("Finner ikke klassen "
    + NOTISKLASSE);
                 inn = arkiv.getInputStream(klasse);
                 ut = new ByteArrayOutputStream(inn.available());
                 byte[] kode = new byte[4096];
                 int antall = inn.read(kode);
                 while (antall > 0)
                     ut.write(kode, 0, antall);
                     antall = inn.read(kode);
                 return ut.toByteArray();
             catch (IOException ioe)
                 throw new RuntimeException(ioe.getMessage());
             finally
                 try
                    if (inn != null)
                       inn.close();
                    if (ut != null)
                       ut.close();
                 catch (IOException ioe)
         }I hope somebody can help. :-)
    Regards,
    Knut St�re

    I'm not quite sure how Java handles local classes defined within a method, but from this example it seems as if the local class isn't loaded until it is actually needed, that is when the method is called, which seems like a good thing to me.
    The parent class is already loaded as you can see. It is the loading of the inner class that fails.
    But maybe there is something I've forgotten in my loading code? I know in the "early days" you had to do a lot more to load a class, but I think all that is taken care of by the superclass of my classloader now. All I have to do is provide the raw data of the class. Isn't it so?

  • Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002

    Following situation. In SCCM we have one Standalone Primray Site Server and two Site Server. The two site server are also SMS Provider. MDT 2012 was installed on all three Servers and the Config Manager Integration was run. When starting the Console
    on any of this server and editing an MDT Task Sequence, it occasionally pops up an error "An error occured when loading the task sequence". TaskSequenceProvider.log File throws a lot of errors:
    [PID: 2824] Invoking method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
    Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
    Failed to load node Use Toolkit Package from XML into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
    Failed to load children steps for node "Applikation" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
    Failed to load children steps for node "" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
    Failed to load XML for the task sequence into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
    [PID: 2824] Done with method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:28:50 4916 (0x1334)
    Tried removing the integration on all SMS Provider Machines and readded them. It does not make a differenence. Does anyone know if MDT supports the use of multiple SMS Providers? When I only use one Provider and deinstall the other two, it works ok.

    Some more info from the log files:
    TaskSequenceProvider.log
    [1680680 PID:5228] Initializing provider for namespace root\sms\site_P01 TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    [1680680  PID:5228] Initialization of provider for namespace root\sms\site_P01 succeeded TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    [PID: 5228] Invoking method SMS_TaskSequence.ExportXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    Failed to export task sequence to XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    [PID: 5228] Done with method SMS_TaskSequence.ExportXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    Setting status complete:  status code = 0x80041002; Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    [PID: 5228] Invoking method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    Failed to load node Use Toolkit Package from XML into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    Failed to load children steps for node "Applikation" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    Failed to load children steps for node "" from XML 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    Failed to load XML for the task sequence into WMI 0x80041002 (2147749890) TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    [PID: 5228] Done with method SMS_TaskSequence.LoadFromXml TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    Setting status complete:  status code = 0x80041002; Failed to load class properties and qualifiers for class BDD_UsePackage in task sequence. TaskSequenceProvider 20.06.2012 10:51:38 4424 (0x1148)
    SMS Provider logs the following:
    CExtUserContext::EnterThread : User=A2\trth1 Sid=0x0105000000000005150000001BB949E9D7F6AADBC3309AA56BAB0000 Caching IWbemContextPtr=0000000005777900 in Process 0x9f8 (2552) SMS Provider 20.06.2012 10:51:47 3008
    (0x0BC0)
    Context: SMSAppName=SMS Administrator Console SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    Context: MachineName=vswlieca2146.A2.loc SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    Context: UserName=A2\trth1 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    Context: ObjectLockContext=fdf8ab87-cf50-43bd-a48a-d5bb99c8034f SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    Context: ApplicationName=Microsoft.ConfigurationManagement.exe SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    Context: ApplicationVersion=5.0.0.0 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    Context: LocaleID=MS\0x409 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    Context: __ProviderArchitecture=32 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    Context: __RequiredArchitecture=0 (Bool) SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    Context: __ClientPreferredLanguages=en-US,en SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    Context: __GroupOperationId=590802 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    Context: __WBEM_CLIENT_AUTHENTICATION_LEVEL=6 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    CExtUserContext : Set ThreadLocaleID OK to: 1033 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    CSspClassManager::PreCallAction, dbname=CM_P01 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    ExecMethodAsync : SMS_ObjectLock::ReleaseLocks SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    Requested class =SMS_ObjectLock SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    Requested num keys =0 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    CExtProviderClassObject::DoExecuteMethod ReleaseLocks SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    CSspSEDO::ReleaseLocks: ********** Releasing SEDO Lock for object SMS_TaskSequencePackage.PackageID="P010013A" for user A2\trth1. ********** SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)
    CExtUserContext::LeaveThread : Releasing IWbemContextPtr=91715840 SMS Provider 20.06.2012 10:51:47 3008 (0x0BC0)

  • Custom User and Group classes

    Hi,
    I have a login custom module which does the authentication for my application.
    Till now I was using WLSUserImpl and WLSGroupIpml and everything was working fine.
    Now to make the LoginModule weblogic independent , I replaced the User and Group
    classes with my own classes which extend from java.security.Principal.
    But for some reason this isnt working. Am I missing something obvious.??
    This the exception stack trace which I get
    java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[com.isone.security.providers.authentication.ISOUser@1698cbe,
    com.isone.security.providers.authentication.ISOGroup@9719f4, com.isone.security.providers.authentication.ISOGroup@28ebb4,
    com.isone.security.providers.authentication.ISOGroup@8ab721, com.isone.security.providers.authentication.ISOGroup@fcf06c,
    com.isone.security.providers.authentication.ISOGroup@c7539, com.isone.security.providers.authentication.ISOGroup@1e41830,
    com.isone.security.providers.authentication.ISOGroup@1f01b29, com.isone.security.providers.authentication.ISOGroup@8721bd,
    com.isone.security.providers.authentication.ISOGroup@1b81d4f, com.isone.security.providers.authentication.ISOGroup@8c6e04,
    com.isone.security.providers.authentication.ISOGroup@18aeabe, com.isone.security.providers.authentication.ISOGroup@13968f1,
    com.isone.security.providers.authentication.ISOGroup@18c28a, com.isone.security.providers.authentication.ISOGroup@18bff68,
    com.isone.security.providers.authentication.ISOGroup@2d2da4]
         at weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:682)
         at weblogic.security.service.RoleManager.getRoles(RoleManager.java:279)
         at weblogic.security.service.AuthorizationManager.isAccessAllowed(AuthorizationManager.java:694)
         at weblogic.servlet.security.internal.WebAppSecurity.hasPermission(WebAppSecurity.java:567)
         at weblogic.servlet.security.internal.SecurityModule.checkPerm(SecurityModule.java:134)
         at weblogic.servlet.security.internal.FormSecurityModule.checkUserPerm(FormSecurityModule.java:327)
         at weblogic.servlet.security.internal.SecurityModule.beginCheck(SecurityModule.java:182)
         at weblogic.servlet.security.internal.FormSecurityModule.checkA(FormSecurityModule.java:181)
         at weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:145)
         at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3539)
         at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)

    And this will explain you why there is no way to do this right now:
    (CR125681 -- although it says 7.0SP1 it is not fixed even in 8.1 SP2 and
    there is no time frame for the fix)
    http://support.bea.com/application?namespace=askbea&origin=ask_bea_answer.jsp&event=link.view_answer_page_clfydoc&answerpage=solution&page=wls/S-21705.htm
    We've had the same issue and even have an open support case and for now
    the only way to workaround the bug is to
    use the WLSUserImpl and WLSGroupImpl classes.
    HTH,
    Dejan
    Pavel wrote:
    See if this will help:
    http://edocs.bea.com/wls/docs81/dvspisec/pv.html
    Pavel.
    "Anil" <[email protected]> wrote:
    I actually extended PrincipalValidatorImpl and returned java.security.Principal
    as the base class.
    But still I got the same exception.
    PaulF <paulf@reply_in_newsgroup.com> wrote:
    On 25 Feb 2004 06:45:50 -0800, Anil <[email protected]> wrote:
    Hi,
    I have a login custom module which does the authentication for my
    application.
    Till now I was using WLSUserImpl and WLSGroupIpml and everything was
    working fine.
    Now to make the LoginModule weblogic independent , I replaced the
    User
    and Group
    classes with my own classes which extend from java.security.Principal.
    But for some reason this isnt working. Am I missing something obvious.??
    This the exception stack trace which I get
    java.lang.SecurityException: [Security:090398]Invalid Subject:
    principals=[com.isone.security.providers.authentication.ISOUser@1698cbe,
    com.isone.security.providers.authentication.ISOGroup@9719f4,
    com.isone.security.providers.authentication.ISOGroup@28ebb4,
    com.isone.security.providers.authentication.ISOGroup@8ab721,
    com.isone.security.providers.authentication.ISOGroup@fcf06c,
    com.isone.security.providers.authentication.ISOGroup@c7539,
    com.isone.security.providers.authentication.ISOGroup@1e41830,
    com.isone.security.providers.authentication.ISOGroup@1f01b29,
    com.isone.security.providers.authentication.ISOGroup@8721bd,
    com.isone.security.providers.authentication.ISOGroup@1b81d4f,
    com.isone.security.providers.authentication.ISOGroup@8c6e04,
    com.isone.security.providers.authentication.ISOGroup@18aeabe,
    com.isone.security.providers.authentication.ISOGroup@13968f1,
    com.isone.security.providers.authentication.ISOGroup@18c28a,
    com.isone.security.providers.authentication.ISOGroup@18bff68,
    com.isone.security.providers.authentication.ISOGroup@2d2da4]
         at
    weblogic.security.service.SecurityServiceManager.seal(SecurityServiceManager.java:682)
         at weblogic.security.service.RoleManager.getRoles(RoleManager.java:279)
         at
    weblogic.security.service.AuthorizationManager.isAccessAllowed(AuthorizationManager.java:694)
         at
    weblogic.servlet.security.internal.WebAppSecurity.hasPermission(WebAppSecurity.java:567)
         at
    weblogic.servlet.security.internal.SecurityModule.checkPerm(SecurityModule.java:134)
         at
    weblogic.servlet.security.internal.FormSecurityModule.checkUserPerm(FormSecurityModule.java:327)
         at
    weblogic.servlet.security.internal.SecurityModule.beginCheck(SecurityModule.java:182)
         at
    weblogic.servlet.security.internal.FormSecurityModule.checkA(FormSecurityModule.java:181)
         at
    weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:145)
         at
    weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3539)
         at
    weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
    I think that you need to extend WLSAbstractPrincipal I think instead
    of
    WLSPrincipal if you aren't going to implement your own
    PrincipalValidator. The default PrincipalValidator is going to expect
    a
    principal that extends WLSAbstractPrincipal.
    PaulF
    Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/

  • Can I change Bookmark Folders labels colors and/or assign custom icons?

    I want to customize Bookmark Folders in Safari by changing label colors and/or assigning custom folder icon individually to each folder. Is it possible? How?

    Anyone...?

  • Reproducing Incident Form Elements in a Custom Class

    Hello again everyone,
    I am trying to rollout a completely separate module in SCSM to record MACD (Move/Add/Change/Delete) requests. I decided to use the OOB incident module as my base class as it already contained many fields I require (I inherited the properties
    and relationships) and created a new form assembly in Visual Studio to wire the properties to.
    After created the form and labels, I imported the .dll into the Authoring Tool so I can just drag out each property from the MP explorer onto the form. Everything works except for the last few fields which are a bit more complex than a standard list or textbox.
    I cannot seem to add the controls for the more complicated items like "Affected Services" or "Affected Items", when I try to drag them out to the form I get an error saying cardinality is not set to 1... I am guessing this is because
    its trying to map a relationship between a workitem and a service instead of my custom class and a service...
    So I went back into Visual Studio and added a ListView to the form, thinking I will have to wire the data bindings inside the form itself. However, I am stuck as I am not sure where "Services" are being written to, as I will need this location
    to reference in my empty ListView. I have provided my code and commented where I believe I am missing logic. Thank you in advance for any help!
    Note: "servicerelatestoworkitem" is not actually an object, my logic is conceptual and I still have not found which class/object the list of services is being written to.
    C# Code containing button logic (an add button to add a service to the ListView, and a delete button to remove a service from the ListView.
    private void add_services_button_Click(object sender, RoutedEventArgs e)
       // Open list of Services here, allow user to pick a service, then add selected service to "servicerelatestoworkitem"
       // AffectedServicesListView is populated from servicerelatestoworkitem
    private void del_services_button_Click(object sender, RoutedEventArgs e)
        // Test to see if item is being selected and display selected item to confirm ability to manipulate variable
        try
            var itemSelected = ListView.GetIsSelected(AffectedServicesListView);
            MessageBox.Show(itemSelected.ToString());
        catch (Exception ex)
            MessageBox.Show(ex.Message);
        // Remove selected item from servicerelatestoworkitem and refresh AffectedServicesListView
    XAML Code containing the list view and two buttons: (Note: The binding is most likely incorrect, I was just experimenting with it)
    <ListView x:Name="AffectedServicesListView" HorizontalAlignment="Left" Height="95" Margin="10,414.6,0,0" VerticalAlignment="Top" Width="521" ItemsSource="{Binding Path=AffectedServicesListView, Mode=Default, UpdateSourceTrigger=PropertyChanged}">
                            <ListView.View>
                                <GridView>
                                    <GridViewColumn/>
                                </GridView>
                            </ListView.View>
                        </ListView>
                        <Button x:Name="add_services_button" Content="" HorizontalAlignment="Left" Margin="470.55,382.749,0,0" VerticalAlignment="Top" Width="27.674" Height="26.851" Click="add_services_button_Click" BorderBrush="{x:Null}">
                            <Button.Background>
                                <ImageBrush ImageSource="add.png"/>
                            </Button.Background>
                        </Button>
                        <Button x:Name="del_services_button" Content="" HorizontalAlignment="Left" Margin="503.224,382.749,0,0" VerticalAlignment="Top" Width="27.776" Height="26.851" Click="del_services_button_Click" BorderBrush="{x:Null}">
                            <Button.Background>
                                <ImageBrush ImageSource="delete.png"/>
                            </Button.Background>
                        </Button>

    Cardinality is a property of relationships classes, not a property of specific relationships. each type of relationship has it's own cardinality values, but the engine only really recognizes "one" and "many". it makes sense to say that
    the "affected user" relationship is many to one, because Each work item can have one and only one affected user, but each users may be the affected user of many work items. The Related work items relationship is a many to many, because each workitem
    may be related to many other work items. it doesn't make sense to say this specific relationship between this IR and that user is "many to one", because each instance is only between one specific object and another specific objects. the cardinality
    just controls how many of those specific relationships instances can exist for each type of relationship. 
    There are no out of the box controls for many to many relationships. the Instance Picker control is designed to support one to one and many to one relationships. you'd have to write your own controls for support many to one relationships. Consider Travis
    Wright's SR Example for 2010, since most of this code should execute in 2012 and 2012r2 with only minor modifications. 
    You'd have to either find the control that defines it, like with the history tab, or recreate it using the
    authoring tool or
    Visual Studio. 

  • Unit testing: Mocking custom classes with null

    Hi,
    I was trying to save time on testing the usual hashCode() and equals() methods so I got this class: http://www.cornetdesign.com/files/BeanTestCase.java.txt
    I altered it a bit as it wasn't handling standard classes only primitives.
    Anyway, I got to the point to include my own custom classes.
    I have to create a 'mock' object for my class properties, e.g. field.getType().newInstance()
    Fine, but there are some tricky instances. E.g. when I'd like to create an instance of java.net.URL which takes a URL as String in the constructor.
    This is almost impossible to automate as it has to be a valid URL format not just a random String.
    So, I thought I set them to null, e.g.
    assertTrue(o1.equals(o2))
    as both properties are null.
    Is this the right approach you think?
    I welcome any suggestions.
    My initial idea was to save enormous amount of time automating the hashCode() and equals() method tests as they took so long to write.
    Thanks

    Trouble would be that you are only testing the null branch of the equals or hashCode, which typically have to check for null, then if not null do an actual comparison.
    It's worth the effort of learning to use a package such as EasyMock to create and program mock objects. It's tidiier if you are progamming to interfaces, however, but it will mock ordinary objects, though probably not if they are final.
    What you could do is to define a factory interface, and have a table of anonymous classes wich generate various types. In effect create a library of dumy object factories.
    Something like:
    private interface DummyGenerator {
          Object generate(int idx);
          Class<?> getType();
    private final static DummyGenerator[] generatorsTable {
        new DummyGenerator() {
               public Object generate(int idx) {
                 return new URL("http://nowhere.com/" + idx);
         public Class<?> getType() { return URL.class; }
    .. generators for other classes
    private final static Map<Class<?>, DummyGenerator> genMap = new HashMap<Class<?>, DummyGenerator>(generatiorsTable.length);
    static {
        for(DummyGenerator gen : generatorsTable)
            genMap.put(gen.getType(), gen);
    }

Maybe you are looking for

  • How to enable repetitive values in report.

    hi, I dont want to supress values in my report. my report is being displayed  in following way. plant     price 1000     200 blank    300 blank    400 2000     500 blank    600. But i want to display the report in following way. I want plant (charact

  • How to check actual allocated and used memory for java process in solaris?

    Hi, I'm testing performance for java application on solaris 10. And I would like to know how to measure actual memory allocated and used for java process. I'm setting -Xms512m -Xmx512m for my java process and I use prstat command to monitor it's memo

  • Application Import : MENU's are LOST

    Hi, We have a problem where we have exported an Application & imported it to a diff. box with same config.(10g/Linux) All the MENU Ref. to the REGION is LOST ..it shows something like : M1816729359141287, Instead of the "MENU: Task" Name ... Please H

  • Error -10007 when using multi PXI6115

    I'm getting "error -10007 occured at setup conditional retrieval". I am running two programs simultaneously using the example program "acquire N Scans analog software trig.VI" in order to trigger DAQ#1 & DAQ#2 at various times. When I run both progra

  • How to script

    using flash , I inserted a submit button, and in actionscript I scripted it yet when you click on it a error comes up.. I need to know what script to use, I use I power as my server which uses vdeck , they