LABST from MARD table in which exctractor

Hi,
I'm looking for an extractor which will held field LABST from MARD table and if you could give me an extractor in which is MARD table.
regards

Hi,
You may go for the masterdata extractor 0MATERIAL_ATTR. Though it doesnt contain field LABST, you can enhance it to include the field in it.
Below is the article to enhance the datasource, in case if you have not enhanced any datasource yet.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46 enhancing lo datasource

Similar Messages

Move data from multiple Tables to a Single Table & Convert the list to ALV.

Hi,
My aim is to get the list of Materials with their descriptions, with MRP Controller, with Unrestriced Qty. & the Reorder Qty. So, I have to fetch the data from different tables. But finally I am not able to copy or move the fetched data from multiple tables into the single final table.
Also tell me how to convert this list into ALV.
Below is the program code.
*& Report Y_REORDER_REPORT
REPORT Y_REORDER_REPORT.
tables : marc,makt, mard.
DATA: Begin of i_final occurs 0,
        matnr type marc-matnr,
        maktx type makt-maktx,
        DISPO type marc-DISPO,
        MINBE type marc-MINBE,
        LABST type mard-LABST,
      end of i_final.
DATA: Begin of i_marc occurs 0,
       matnr type marc-matnr,
       DISPO type marc-DISPO,
       MINBE type marc-MINBE,
      end of i_marc.
DATA: Begin of i_makt occurs 0,
       matnr type makt-matnr,
       maktx type makt-maktx,
      end of i_makt.
DATA: Begin of i_mard occurs 0,
       matnr type mard-matnr,
       LABST type mard-LABST,
       LGORT TYPE MARD-LGORT,
      end of i_mard.
SELECT matnr
        dispo
        minbe from marc
        into corresponding fields of table i_marc
        where dispo EQ 'STR'.
SORT I_MARC by MATNR.
WRITE: /10 'Material',
        75 'MRP',
        80 'Reorder Qty.'.
LOOP at i_marc.
Write: /10 i_marc-matnr,
        75 i_marc-dispo,
        80 i_marc-minbe.
ENDLOOP.
write: /.
SELECT matnr
        MAKTX from makt
        into corresponding fields of table i_makt
        for all entries in i_marc
        where matnr = i_marc-matnr.
LOOP at i_makt.
Write: /10 i_makt-matnr,
        30 i_makt-maktx.
ENDLOOP.
SELECT matnr
        LGORT
        LABST from mard
        into corresponding fields of table i_mard
        for all entries in i_marc
        where matnr = i_marc-matnr.
LOOP at i_mard.
Write: /10 i_mard-matnr,
        30 I_MARD-LGORT,
        40 i_mard-labst.
ENDLOOP.
move i_mard-matnr to i_final-matnr.
move i_marc-dispo to i_final-dispo.
move i_marc-minbe to i_final-minbe.
move i_makt-maktx to i_final-maktx.
move i_mard-labst to i_final-labst.
WRITE: /10 'Material',
        30 'Material Desc.',
        75 'MRP',
        80 'Reorder Qty.',
        105 'Current Stock'.
LOOP at i_final.
Write: /10 i_final-matnr,
        30 i_final-maktx,
        75 i_final-dispo,
        80 i_final-minbe,
        105 i_final-labst.
ENDLOOP.
*LOOP at i_mard.
*Write: /10 i_mard-matnr,
       30 i_makt-maktx,
       75 i_marc-dispo,
       80 i_marc-minbe,
       105 i_mard-labst.
*ENDLOOP.
Regards,
Vishal

Change like this,
SELECT matnr
lgort
labst FROM mard
INTO CORRESPONDING FIELDS OF TABLE i_mard
FOR ALL ENTRIES IN i_marc
WHERE matnr = i_marc-matnr.
LOOP AT i_mard.
   WRITE: /10 i_mard-matnr,
   30 i_mard-lgort,
   40 i_mard-labst.
ENDLOOP.
LOOP AT i_marc.
   READ TABLE i_mard WITH KEY matnr = i_marc-matnr.
   READ TABLE i_makt WITH KEY matnr = i_marc-matnr.
   MOVE i_mard-matnr TO i_final-matnr.
   MOVE i_marc-dispo TO i_final-dispo.
   MOVE i_marc-minbe TO i_final-minbe.
   MOVE i_makt-maktx TO i_final-maktx.
   MOVE i_mard-labst TO i_final-labst.
   APPEND i_final.
ENDLOOP.
WRITE: /10 'Material',
30 'Material Desc.',
75 'MRP',
80 'Reorder Qty.',
105 'Current Stock'.

Sender JDBC Adapter : Fetch records from multiple tables

Hi Friends,
I am using sender JDBC adapter to select few records from DB2 database table.
This scenario is working fine.
Now my requirement is to fetch records from 3 tables. These table are independent to each other. There is no primary key or foreign key.
Please let me know how to write the sql in sender JDBC adapter to fetch records from these 3 tables.
Thanks,
Sandeep Maurya

hi sandeep...
if the tables are completely independent and do not share any primary / foreign key relation ship...
why dont u think towards creating a seperate interface for each of them..
or if u still want to select from multiple table at once..the best way would be to write a stored procedure on the sender side which do all the fetching n processing and pass the final resultset to PI
or u can think towards fetching the data from 1 table and then in UDF do lookup from other tables..which again is tricky and performace intensive

Drop down in the selection for the field from the table

Hi.
i want to put the drop down for the field from the table fo which i dont know the number of entries for the field zregion1 of the table zbwcntry.
please tell me how to use the function module and what could be the line of codes.
the drop down is for the select option on the slection screen of the classical report.
please help .

HI,
Check below code..it may help you.
REPORT Zbunu .
TYPES :BEGIN OF STR ,
       MATNR TYPE MATNR ,
       END OF STR .
DATA : ITAB TYPE TABLE OF STR WITH HEADER LINE,
       VAR TYPE MARA-MATNR .
PARAMETERS : S_MATNR TYPE MATNR ,
              P_MATNR TYPE MATNR.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_MATNR .
SELECT MATNR FROM MARA INTO
CORRESPONDING FIELDS OF TABLE ITAB UP TO 1000 ROWS.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE         = ' '
    retfield               = 'MATNR'
PVALKEY                = ' '
   DYNPPROG               = SY-CPROG
   DYNPNR                 = SY-DYNNR
   DYNPROFIELD            = 'S_MATNR'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
   VALUE_ORG              = 'S'
MULTIPLE_CHOICE        = ' '
DISPLAY                = 'X'
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
tables
    value_tab              = ITAB
FIELD_TAB              =
RETURN_TAB             =
DYNPFLD_MAPPING        =
EXCEPTIONS
   PARAMETER_ERROR        = 1
   NO_VALUES_FOUND        = 2
   OTHERS                 = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Ansumesh

Polling records from mulitiple table(61 Tables) using WCF-SQL adapter

Hi,
I would like get some suggestion from this forum. I've a scenario, in which I need to poll the records from multiple table(61) which are related and may have one to many relationship. what's the best way to poll the records from SQL table to BizTalk.
Thanks in advance..
Regards,
Karthick

Karthick,
Write a SQL stored procedure with joins from your 61 tables (!!!) . Use WCF-SQL adapter to invoke the procedures.
Following references shall help you:
Executing Stored Procedures in SQL Server by Using BizTalk Server
Performing Composite Operations on SQL Server by Using BizTalk Server
Bing-Results: biztalk wcf sql
adapter polling stored procedure
I don’t know your exact requirement. Consider using SQL-SSIS for ETL process depending on your requirements. Anyway if your requirement really needs BizTalk, above suggest
should solve your problem.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Data pulling from MARD, MARC etc. - Which table first I hv to use?

Hi Experts,
User enters the Matnr, plant, storage location inputs in the selections.
It is need to get the corresponding data from MARD, MARC, MDBS, VBBE.
So,
1) Is it possible that, suppose MARD having 10 matnrs, where as MARC is having 15, where as MDBS have only 7? or every table does hv 10 definately?
2) as I need to pull the data from these tables, pls. suggest me, in which order I hv to pull, I mean, first from Which table i hv to pull, and as second, wht is next table? for more reliability.
thanq

HI
select matnr
          LBSTF
   from mard
into table itab1
where matnr = p_matnr
condition.
if not itab[] is initial.
select EISBE
     from marc
into table itab1
for all entries in itab
where matnr = itab-matnr
and any other condition
select MENGE
      from MDBS
into table itab2
for all entries in itab1
where matnr = itab1-matnr condition
endif.
write like this
you will get data if availble

Fetch data from table(ET_) which is exporting parameter of function module

Hi,
I m new to ABAP programming.
I have to develop a smartform that has to be filled in with fields from few tables.
These tables have the naming convention ET_<XXX> (i.e. exporting parameter of function module).
I m not able to directly view its contents in se11 or use select query for it.
I have a report program which i can execute to view these parameter names.
Now, how do i fetch data from these parameters/tables and pass it from my driver program to smartform??
Someone pls guide me...
Thank You.

Hi,
I have done that using Field-Symbols.
Thanks,
Preetha

Create a procedure which requires displaying information from two tables

What if we want to create a procedure which requires displaying information from two tables. In this situation,
I need to display all the details of an employee from an 'emp' table based on the deptno. and also their salary information which is
stored in "Salgrade" Table. Is the use of "And" the correct way of using it?
Do I need to declare all the attributes before begin or I can just access them directly? Thanks
Create Procedure findDept
( I_deptno IN number
) As
Begin
Select Ename, Job, MGR, Hiredate, Sal, Comm, Dept_no from emp and exp, grade , location from salgrade where dept_no
= I_Deptno;
Exception
When NO_Data_Found then
DBMS_Output.Put_Line(' Department not found"|| I_deptno);
End findDept;

Hi,
Besides Qwerty's remark, you've also got a quoting error:
Change
DBMS_Output.Put_Line(' Department not found"|| I_deptno);
{code}
into
{code}
dbms_output.put_line(' Department not found: '|| i_deptno);
{code}
Which leads to the question:
What do you want to do when a record is found?
Display it?

Which tables, apart from the tables of class UPC, are used by STS ?

Hello, all,
does anybody know which tables, apart from the tables of class UPC, are used by STS in BW-BPS?
Merry X-Mas and best regards
Nina

Hi Nina,
there are 20 tables starting with UPS_* that are used by STS.
Regards,
Marc
SAP NetWeaver RIG

Create a table which has columns from another table in other schema

Hi All
I need to create a table which is table driven i.e., the columns of that table need to be inserted from another table in a different schema...Can any one help me with this??

create table newtab (--column spec here--) as
Select --columns here-- from otherschema.tablename;max

How to get the data from a table which are availble in MD04

Hello,
Can you please let me know the tables in which the 'data available in MD04' are stored.
I would like to have the data pertaining to the customer order/Item with requirements available in MD04.
Thanks and Regards,
Jana.

Probably the easiest way in this case is to run the performance trace (System/Utilities/Performance trace). Start transaction MD04, put on the trace in another window, press enter to see the stock/requirements list, then stop the trace and list the results. Then you'll see which tables were accesses with which queries.

Selecting data from a table which has a LONG column

hi all,
In the table user_views there is a LONG column. Now i want to select rows from that table based on this LONG column. like....
select *from user_views where text like '%account%;
but i am getting the error.."ORA-00932: Inconsistent datatypes:Expected NUMBER got LONG".
How do I overcome this error.
Please give me some suggestions.
Thanks & Regards,
Vijay

In the table user_views there is a LONG column. Now i want to select rows from that >table based on this LONG column. like....LONG columns cannot appear in a WHERE or
AND clause.

Reading data from a table which can have millions of record

Hi,
I need to write a query in my report that can be able to fetch records from a z table that have arount 20 lac (= 2 million) records. As far i knoew we can not handle such a huge amount of data in our internal tables. because the size of internal table is fixed and that can be increased only by basis persons.
So can anybody tell me the approach that i should follow such that i can split the data from this table.
Or any other approach is also welcome.
Please reply ASAP when you have the time.
Thanks And Regards,
Mayank
Edited by: Thomas Zloch on Mar 6, 2010 9:25 PM

Hi Mayank,
reduce the data selected to the fields you really need, avoid select *. See online help on SELECT, addition PACKAGE SIZE.
select field1 field2 field3
into corresponding fields of table lt_table package size nnn WHERE ...
* process lt_table
endselect.
Regards,
Clemens
Edited by: Rob Burbank on Mar 9, 2010 12:29 PM

How to insert a row in Tree table which is dragged from the table?

Hi All,
I am having a Tree table and a Table in the same page, like below
Treetable                                         Table
Item1                                              Subitem12
     Subitem1                                   Subitem13
     Subitem2                                   Subitem14
     Subitem3                                   Subitem15
     Subitem4                                   Subitem16
Item2                                              Subitem17
     Subitem5                                   Subitem18
     Subitem6                                   Subitem19
     Subitem7                                   Subitem20
     Subitem8                                   Subitem21
Item3
     Subitem9
     Subitem10
     Subitem11
The requirement is i need to "drag" a row from the Table and place it under any parent node in the Tree table.
What i have done is I make the Tree table as ".ui-sortable" and table as a "draggable".
I am not able to find the position of the dragged item when i dropped it in the Treetable.
Please provide me a solution.
Regards,
Aravindh

Hello:
Do you mean setting the selectedRowKeys in the setter method of the treeTable in the Request Scoped Managed Bean?
If that is what you mean, I tried that and there was no change in behavior. (Still does not highlight the correct row in the tree table upon execution of the next method for the bindings) Does anyone have any sample code they can provide that works?
Thanks for the help.

Retrieving data from 3 tables

Hi,
I am working on a report where I have to retrieve data from 3 tables(marc,mara,makt).For this I have used 3 select statements for retriving data from 3 tables.There r some fields which r not present in marc table where as present in mara and makt tables.So added thos fields in marc internal table t_marc.I have looped at marc table and used the read statement to read the data from mara table using the key field matnr from both the tables.This read statement is giving the sy-subrc value as 4.Could u pls tell me why this is happening?I am sending my code.
SELECT matnr
       werks
       pstat
       lvorm
FROM marc
INTO TABLE t_marc
PACKAGE SIZE 500
WHERE matnr IN s_matnr
AND   werks IN s_werks.
IF NOT t_marc[] IS INITIAL.
SELECT matnr
        ersda
        laeda
        meins
   FROM mara
   INTO TABLE t_mara
   FOR ALL ENTRIES IN t_marc
   WHERE matnr = t_marc-matnr
   AND   ersda IN s_ersda
   AND   laeda IN s_laeda.
IF NOT t_mara[] IS INITIAL.
     SELECT matnr
            maktx
     FROM makt
     INTO TABLE t_makt
     FOR ALL ENTRIES IN t_mara
     WHERE matnr = t_mara-matnr.
   LOOP AT t_marc INTO wa_marc.
     READ TABLE t_mara INTO wa_mara WITH KEY matnr = t_marc-matnr.
     IF sy-subrc IS INITIAL.
        wa_marc-meins = wa_mara-meins.
        MODIFY t_marc.
        APPEND wa_marc TO t_output.
      ENDIF.
      READ TABLE t_makt INTO wa_makt WITH KEY matnr = t_marc-matnr.
      IF sy-subrc IS INITIAL.
        wa_marc-maktx = wa_makt-maktx.
        MODIFY t_marc.
        APPEND wa_marc TO t_output.
      ENDIF.
    ENDLOOP.

hi hema,
Dont use three select stements for this scenario.
Just use innerjoin and join all the three tables.
Three tables should contain MATNR (material number).
By using that retrieve data from 3 tables by using a single select statement.
Eg:
SELECT DISTINCT a~matnr    "MATERIAL NUMBER
         a~ersda    "CREATED ON
         a~mtart    "MATERIAL TYPE
         a~meins    "BASE UNIT OF MEASURE
         a~bstme    "ORDER UNIT
         b~maktx    "MATERIAL DESCRIPTION
         c~bwkey    "VALUATION AREA
         c~lbkum    "TOTAL VALUED STOCK
         c~salk3    "VALUE OF TOTAL VALUED STOCK
         c~stprs    "STANDARD PRICE
         c~peinh    "PRICE UNIT
         c~bklas    "VALUATION CLASS
         INTO TABLE it_matdetails
         FROM mara AS a INNER JOIN makt AS b ON a~matnr = b~matnr
                        INNER JOIN mbew AS c ON a~matnr = c~matnr
                        INNER JOIN marc AS d ON a~matnr = d~matnr
                        INNER JOIN mard AS e ON a~matnr = e~matnr
         WHERE b~spras = sy-langu AND a~matnr IN matnr AND d~werks IN werks AND e~lgort IN lgort.
pls reward if helpful.

LABST from MARD table in which exctractor

Similar Messages

Maybe you are looking for