LAP not joining WiSM in Virtualization mode
hi
I have 2 WiSM running in virtualization mode, the AP are not able join, knowing that i am running DHCP locally on the core switch and there is no DNS server, when I checked the boot of the access point it is saying it is unable to receive vci code and unable to resolve CISCO-LWAPP-CONTROLLER. the access point is 1252. I tried the configuration of option 43 on the core when the dhcp is located but it is not working do u have any running configuration for this?
Thanks,
Elie
The access point can discover controllers through your domain name server (DNS). For the access point to do so, you must configure your DNS to return controller IP addresses in response to CISCO-LWAPP-CONTROLLER.localdomain, where localdomain is the access point domain name. When an access point receives an IP address and DNS information from a DHCP server, it contacts the DNS to resolve CISCO-LWAPP-CONTROLLER@localdomain. When the DNS sends a list of controller IP addresses, the access point sends discovery requests to the controllers.
Similar Messages
-
Lap not joining over a wan link
hi
i have 2 wism running on 6509 chassis and i have access points in remote branches. the lap is not joining the wism. here is the situation:
lap can ping the controllers
lap is getting ip address
option 43 is there on the vlan
dns entry for the wlc is there.
however, when i checked the lap boot: it s getting an ip address and gives the command prompt.
the below debugging on the wlc gives nothing:
debug capwap events
debug capwap errors
debug mac addr <mac addr>
the wan link is private wan running ospf on both routers from each end.
I see no point why this lap is not joining
any idea?Hi,
According to your description, I understand that all attachments in Outlook are opened slowly since updating Outlook 2003 to 2013. Please confirm whether all users encounter this issue. Also check whether the issue continues in cached mode and in OWA.
Based on your post, I suggest we can try to disable the following add-ins to check whether the issue persists:
Acrobat PDFMaker office com addin
symantec endpoint protection outlook addin
If there is any updates, please feel free to let us know.
Thanks,
Winnie Liang
TechNet Community Support -
LAP not joining the controller
Gents
I have 1 AP out of ten not joining the controller. I connected the access point to the network and I checked its boot. the access point reaches LWAPP Discovery" and then give me console input. I hard reset the access point and I hard coded an IP address for the AP the AP joins the controller, but when I reset it to assign it to another controller it did not join again.
why the discovery process is not showing the DHCP option 43 configured and DNS for CISCO-LWAPP-CONTROLLER configured on the DNS. All the access point is operating normally except this one. it has many certificate inside, why a hard reset did not work to solve the problem?
Please advise
Thanks,Does the LAP have a valid IP address?
Can the LAP ping the WLC managment IP address?
Console into the LAP and in enable mode, type the command "lwapp ap controller ". -
Hello, I am Claudio
I have problems with register the APs in the module WiSM, the AP join statistics is null.
The IPs from APs are local DHCP in the module.
The softtware version in the WiSM is 7.0.116. The APs are 1140. The IOS version on the Cat6500 is 12.2.33SXI4a.
Some of you had a similar problem.
Thanks, best regardsThe option 43 is......
ip dhcp pool APs
network 172.23.24.0 255.255.255.0
default-router 172.23.24.1
option 43 hex f108ac140194ac140196
The problem is not the option 43, the problem is between the module WiSM and SUP720.
I Replace WiSM for a WLC4402 and APs were recorded without problems
debug WiSM.....
URA_NUNOA_SW_6500_CLH#
Aug 31 16:27:20.818: WiSM-Evt:dman_cntrl_db_search_by_mac: Found mac 68ef.bd2f.2d22 for slot/port 2/1
Aug 31 16:27:20.822: WiSM-Evt:dman_reg_arp_added: cntrl 2/1 got an ip 172.20.1.178 68ef.bd2f.2d22/68ef.bd2f.2d 22
Aug 31 16:27:20.822: WiSM-Evt:dman_cntrl_db_search_by_mac: Found mac 68ef.bd30.58e2 for slot/port 2/2
Aug 31 16:27:20.822: WiSM-Evt:dman_reg_arp_added: cntrl 2/2 got an ip 172.20.1.179 68ef.bd30.58e2/68ef.bd30.58 e2
Aug 31 16:27:35.822: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 2/1
Aug 31 16:27:35.822: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 2/2
Aug 31 16:27:55.822: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 2/1
Aug 31 16:27:55.822: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 2/2
Aug 31 16:28:00.822: WiSM-Evt:dman_cntrl_db_search_by_mac: Found mac 68ef.bd30.58e2 for slot/port 2/2
Aug 31 16:28:00.822: WiSM-Evt:dman_reg_arp_added: cntrl 2/2 got an ip 172.20.1.179 68ef.bd30.58e2/68ef.bd30.58 e2
Aug 31 16:28:00.822: WiSM-Evt:dman_cntrl_db_search_by_mac: Found mac 68ef.bd2f.2d22 for slot/port 2/1
Aug 31 16:28:00.822: WiSM-Evt:dman_reg_arp_added: cntrl 2/1 got an ip 172.20.1.178 68ef.bd2f.2d22/68ef.bd2f.2d 22
Aug 31 16:28:15.822: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 2/1
Aug 31 16:28:15.822: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 2/2
Aug 31 16:28:35.822: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 2/1
Aug 31 16:28:35.822: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 2/2
Aug 31 16:28:40.818: WiSM-Evt:dman_cntrl_db_search_by_mac: Found mac 68ef.bd2f.2d22 for slot/port 2/1
Aug 31 16:28:40.818: WiSM-Evt:dman_reg_arp_added: cntrl 2/1 got an ip 172.20.1.178 68ef.bd2f.2d22/68ef.bd2f.2d22
Aug 31 16:28:40.822: WiSM-Evt:dman_cntrl_db_search_by_mac: Found mac 68ef.bd30.58e2 for slot/port 2/2
Aug 31 16:28:40.822: WiSM-Evt:dman_reg_arp_added: cntrl 2/2 got an ip 172.20.1.179 68ef.bd30.58e2/68ef.bd30.58e2
Aug 31 16:28:55.822: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 2/1
Aug 31 16:28:55.822: WiSM-Evt:dman_proc_keepalive_tmr_handler: keepalive timer expired for 2/2 -
LAP: 1242AG version 12.3(7)JX3
WLC: CTVM version 7.6.100.0
LAP IP: 192.168.3.11
WLC IP: 192.168.2.22
Followed directions on
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/99948-lap-notjoin-wlc-tshoot.html
1) Verified LAP and WLC can ping each other.
2) Verified that time on WLC is correct:
(Cisco Controller) >show time
Time............................................. Mon Mar 3 22:46:40 2014
3) Verified MIC on LAP is NOT expired:
Certificate
Status: Available
Certificate Serial Number: 4CD884DD0000000B2182
Certificate Usage: General Purpose
Issuer:
cn=Cisco Manufacturing CA
o=Cisco Systems
Subject:
Name: C1240-00175a9b08a4
[email protected]
cn=C1240-00175a9b08a4
o=Cisco Systems
l=San Jose
st=California
c=US
CRL Distribution Point:
http://www.cisco.com/security/pki/crl/cmca.crl
Validity Date:
start date: 05:02:38 UTC Apr 4 2006
end date: 05:12:38 UTC Apr 4 2016
renew date: 00:00:00 UTC Jan 1 1970
Associated Trustpoints: Cisco_IOS_MIC_cert
4) Getting the following messages on WLC. (00:17:0f:20:c4:30 is the LAP)
*spamApTask0: Mar 03 22:45:39.885: 00:17:0f:20:c4:30 Received LWAPP DISCOVERY REQUEST to 00:0c:29:9e:17:d7 on port '1'
*spamApTask0: Mar 03 22:45:39.885: 00:17:0f:20:c4:30 LWAPP Discovery Request AP Software Version: 0x3027415
*spamApTask0: Mar 03 22:45:39.885: 00:17:0f:20:c4:30 Join Priority Processing status = 0, Incoming Ap's Priority 0, MaxLrads = 200,joined Aps =0
*spamApTask0: Mar 03 22:45:39.885: 00:17:0f:20:c4:30 Received a Discovery Request from 00:17:0F:20:C4:30 destined for a different controller (0.0.0.0)!. Dropping the packet
5) Getting the following messages on LAP:
*Mar 1 00:15:50.797: LWAPP_CLIENT_EVENT: spamResolveStaticGateway - gateway found
*Mar 1 00:16:00.805: %DOT11-6-FREQ_USED: Interface Dot11Radio0, frequency 2437 selected
*Mar 1 00:16:00.812: %DOT11-6-FREQ_USED: Interface Dot11Radio1, frequency 5765 selected
*Mar 1 00:16:00.812: LWAPP_CLIENT_EVENT: spamHandleDiscoveryTimer: Could not discover any MWAR
"show run-config" from vWLC attached. How shall I troubleshoot?
Thank you!AP0017.5a9b.08a4#capwap ap controller ip address 192.168.2.22
^
% Invalid input detected at '^' marker.
AP0017.5a9b.08a4#
Exec commands:
cd Change current directory
clear Reset functions
clock Manage the system clock
crypto Encryption related commands.
debug Debugging functions (see also 'undebug')
delete Delete a file
dir List files on a filesystem
disable Turn off privileged commands
dot11 IEEE 802.11 commands
enable Turn on privileged commands
exit Exit from the EXEC
fsck Fsck a filesystem
help Description of the interactive help system
led LED functions
lock Lock the terminal
login Log in as a particular user
logout Exit from the EXEC
mkdir Create new directory
monitor Monitoring different system events
more Display the contents of a file
name-connection Name an existing network connection
no Disable debugging functions
ping Send echo messages
pwd Display current working directory
release Release a resource
reload Halt and perform a cold restart
rename Rename a file
renew Renew a resource
rmdir Remove existing directory
save Start to save raise_interrupt_level stack
send Send a message to other tty lines
set Set system parameter (not config)
show Show running system information
systat Display information about terminal lines
terminal Set terminal line parameters
test Test subsystems, memory, and interfaces
traceroute Trace route to destination
undebug Disable debugging functions (see also 'debug')
upgrade Upgrade software
verify Verify a file
where List active connections
AP0017.5a9b.08a4#
From LAP:
AP0017.5a9b.08a4#ping 192.168.2.22
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.22, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
AP0017.5a9b.08a4#
From vWLC:
(Cisco Controller) >ping 192.168.3.11
Send count=3, Receive count=6 from 192.168.3.11
(Cisco Controller) > -
hi All,
I have a scenario where my 2602E is not joining a controller in US. AP is in Netherlands.
AP: AIR-CAP2602E-E-K9
Logs on WLC 5508:
*spamApTask4: Jan 29 10:26:37.398: 18:9c:5d:9b:4d:00 Bridge AP can not join MultiCountry Controller: Bridge mode AP 10.130.90.11:63313 cannot be supported on Multi Country Controll
*spamApTask4: Jan 29 10:26:37.406: 18:9c:5d:9b:4d:00 State machine handler: Failed to process msg type = 3 state = 0 from 10.130.90.11:63313
is there a way i can change the bridge mode from this AP to normal or Local so that it can be useD?
Any help will be great.
thanks
Roycecheck the following.
-
Cisco LAP 2602 can not join Virtual WLC
dear all,
i just install Virtual WLC and i remove WLC 2504 , i install & configured it , but LAP can not join. it was work fine with WLC 2504.
i used the same network topology with the old WLC.
i receive this error logs.
*spamApTask4: Feb 04 06:01:30.082: <<<< Start of CAPWAP Packet >>>>
*spamApTask4: Feb 04 06:01:30.082: CAPWAP Control mesg Recd from 10.192.200.93, Port 26711
*spamApTask4: Feb 04 06:01:30.082: HLEN 4, Radio ID 0, WBID 1
*spamApTask4: Feb 04 06:01:30.082: Msg Type : CAPWAP_DISCOVERY_REQUEST
*spamApTask4: Feb 04 06:01:30.082: Msg Length : 155
*spamApTask4: Feb 04 06:01:30.082: Msg SeqNum : 0
*spamApTask4: Feb 04 06:01:30.082:
*spamApTask4: Feb 04 06:01:30.082: Type : CAPWAP_MSGELE_DISCOVERY_TYPE, Length 1
*spamApTask4: Feb 04 06:01:30.082: Discovery Type : CAPWAP_DISCOVERY_TYPE_UNKNOWN
*spamApTask4: Feb 04 06:01:30.082:
*spamApTask4: Feb 04 06:01:30.082: Type : CAPWAP_MSGELE_WTP_BOARD_DATA, Length 62
*spamApTask4: Feb 04 06:01:30.083: Vendor Identifier : 0x00409600
*spamApTask4: Feb 04 06:01:30.083: WTP_SERIAL_NUMBER : AIR-CAP2602E-I-K9
*spamApTask4: Feb 04 06:01:30.083:
*spamApTask4: Feb 04 06:01:30.083: Type : CAPWAP_MSGELE_WTP_DESCRIPTOR, Length 40
*spamApTask4: Feb 04 06:01:30.083: Maximum Radios Supported : 2
*spamApTask4: Feb 04 06:01:30.083: Radios in Use : 2
*spamApTask4: Feb 04 06:01:30.083: Encryption Capabilities : 0x00 0x01
*spamApTask4: Feb 04 06:01:30.083:
*spamApTask4: Feb 04 06:01:30.083: Type : CAPWAP_MSGELE_WTP_FRAME_TUNNEL, Length 1
*spamApTask4: Feb 04 06:01:30.083: WTP Frame Tunnel Mode : NATIVE_FRAME_TUNNEL_MODE
*spamApTask4: Feb 04 06:01:30.083:
*spamApTask4: Feb 04 06:01:30.083: Type : CAPWAP_MSGELE_WTP_MAC_TYPE, Length 1
*spamApTask4: Feb 04 06:01:30.083: WTP Mac Type : SPLIT_MAC
*spamApTask4: Feb 04 06:01:30.083:
*spamApTask4: Feb 04 06:01:30.083: Type : CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, Length 10
*spamApTask4: Feb 04 06:01:30.083: Vendor Identifier : 0x00409600
*spamApTask4: Feb 04 06:01:30.083:
IE : UNKNOWN IE 207
*spamApTask4: Feb 04 06:01:30.083: IE Length : 4
*spamApTask4: Feb 04 06:01:30.083: Decode routine not available, Printing Hex Dump
*spamApTask4: Feb 04 06:01:30.083: 00000000: 03 00 00 01 ....
*spamApTask4: Feb 04 06:01:30.083:
*spamApTask4: Feb 04 06:01:30.083: Type : CAPWAP_MSGELE_VENDOR_SPECIFIC_PAYLOAD, Length 12
*spamApTask4: Feb 04 06:01:30.083: Vendor Identifier : 0x00409600
*spamApTask4: Feb 04 06:01:30.083:
IE : RAD_NAME_PAYLOAD
*spamApTask4: Feb 04 06:01:30.083: IE Length : 6
*spamApTask4: Feb 04 06:01:30.083: Rad Name :
*spamApTask4: Feb 04 06:01:30.083: CEO_AP
*spamApTask4: Feb 04 06:01:30.083: <<<< End of CAPWAP Packet >>>>
*spamApTask4: Feb 04 06:01:30.083: dc:a5:f4:8c:ff:30 Discovery Request from 10.192.200.93:26711
*spamApTask4: Feb 04 06:01:30.083: dc:a5:f4:8c:ff:30 ApModel: AIR-CAP2602E-I-K9
*spamApTask4: Feb 04 06:01:30.083: dc:a5:f4:8c:ff:30 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 200, joined Aps =0
*spamApTask4: Feb 04 06:01:30.083: apModel: AIR-CAP2602E-I-K9
*spamApTask4: Feb 04 06:01:30.083: apType = 26 apModel: AIR-CAP2602E-I-K9
*spamApTask4: Feb 04 06:01:30.083: apType: Ox1a bundleApImageVer: 8.0.110.0
*spamApTask4: Feb 04 06:01:30.083: version:8 release:0 maint:110 build:0
*spamApTask4: Feb 04 06:01:30.083: dc:a5:f4:8c:ff:30 Discovery Response sent to 10.192.200.93 port 26711
*spamApTask4: Feb 04 06:01:30.083: dc:a5:f4:8c:ff:30 Discovery Response sent to 10.192.200.93:26711
Please any help.dear
yes the wlc 2504 is 8.0.110 but because its damaged i replaced it with new vWLC v 8.0.110.
also i can not put the LAP in flexconnect until its joint. -
Bridge Mode - Could not join 'network '. A timeout error occurred
Have my airport express in bridge mode with a home hub 3 (that has its wireless network disabled). When i go to join the new wireless network i created on the airport express , it gives me the error in my title.
What causes the timeout and how can it be fixed?As I read the network you should be extend wireless network.. not join. And you need to setup the Express to allow it to be extended.. at least on v5 utility.. on v6 it could work automagically.
-
Hi,
I have a 1142N which does not join the WLC when connected via a 2960 switch. When I connect a different lap 1142N to the same port on the same switch using the same cables, it does join the lap to the WLC. And when I connect the first lap directly to the WLC it also works fine.
Resetting the failing lap does not fix the problem. All software levels on the lap are the same.
Anyone an idea what could be wrong?
Thanks in advance.
Regards
Jeroenthnx for your support so far.
All the AP's are the same, AIR-LAP1142N-E-K9 v05. I have two AP's which work fine when connected via the 2960 therefore I assume that the switch, wlc, vlan and dhcp configuration is fine.The thirth one is giving me some challenges ;-)
Note: the non working AP is only not working when connected via de 2960, it is working fine when directly connected to the WLC2106.
@David, where can i find the regulatory domain setting?
working AP
NAME: "AP1140", DESCR: "Cisco Aironet 1140 Series (IEEE 802.11n) Access Point"
PID: AIR-LAP1142N-E-K9
failing AP
NAME: "AP1140", DESCR: "Cisco Aironet 1140 Series (IEEE 802.11n) Access Point"
PID: AIR-LAP1142N-E-K9
AP manager subnet
192.168.1.0/24
Management subnet
192.168.2.0/24
WLC2106 sysinfo
==================================================================================
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.220.0
RTOS Version..................................... 7.0.220.0
Bootloader Version............................... 4.0.191.0
Emergency Image Version.......................... 6.0.199.4
Build Type....................................... DATA + WPS
System Name...................................... CiscoWLC1
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.828
IP Address....................................... 192.168.2.2
System Up Time................................... 10 days 0 hrs 31 mins 36 secs
System Timezone Location.........................
Configured Country............................... NL - Netherlands
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +48 C
--More-- or (q)uit
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 2
Number of Active Clients......................... 0
Burned-in MAC Address............................ 70:81:05:AE:F9:C0
Maximum number of APs supported.................. 6
DHCP pool configured on core switch
==================================================================================
ip dhcp pool AP-Pool
network 192.168.1.0 255.255.255.0
default-router 192.168.1.254
dns-server 192.168.1.1
Boot info failing WAP
==================================================================================
using eeprom values
WRDTR,CLKTR: 0x85000800 0x40000000
RQDC ,RFDC : 0x80000037 0x0000020f
using ÿÿÿÿ ddr static values from serial eeprom
ddr init done
Running Normal Memtest...
Passed.
IOS Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
Xmodem file system is available.
DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x85000800, 0x40000000
RQDC, RFDC : 0x80000037, 0x0000020f
PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is up.
PCIE1: VC0 is active
PCIEx: initialization done
flashfs[0]: 28 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:08.197: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:08.208: *** CRASH_LOG = YES
Security Core found.
Base Ethernet MAC address: 64:9E:F3:B3:5F:88
*Mar 1 00:00:09.787: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:10.359: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:10.393: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 215 messages)
*Mar 1 00:00:10.416: status of voice_diag_test from WLC is false
*Mar 1 00:00:11.459: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:12.536: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:12.573: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Tue 18-Oct-11 14:52 by prod_rel_team
*Mar 1 00:00:12.573: %SNMP-5-COLDSTART: SNMP agent on host AP649e.f3b3.5f88 is undergoing a cold start
*Mar 1 00:11:43.044: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:11:43.105: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:11:43.105: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:11:44.106: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:11:44.106: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:11:44.297: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:11:52.102: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 192.168.1.44, mask 255.255.255.0, hostname AP649e.f3b3.5f88
*Mar 1 00:12:01.917: status of voice_diag_test from WLC is false
*Mar 1 00:12:01.972: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:12:04.769: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:12:04.792: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:12:04.816: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:12:05.776: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:12:05.776: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
*Mar 1 00:12:05.802: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (192.168.1.1)
*Mar 1 00:13:13.006: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
Not in Bound state.
*Mar 1 00:13:23.524: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
*Mar 1 00:13:23.637: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 192.168.1.45, mask 255.255.255.0, hostname AP649e.f3b3.5f88
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (192.168.1.1)
*Mar 1 00:14:19.511: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
Not in Bound state.
*Mar 1 00:14:30.030: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
*Mar 1 00:14:30.139: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 192.168.1.46, mask 255.255.255.0, hostname AP649e.f3b3.5f88
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (192.168.1.1)
*Mar 1 00:15:26.013: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
Not in Bound state.
*Mar 1 00:15:36.532: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.
*Mar 1 00:15:36.640: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 192.168.1.47, mask 255.255.255.0, hostname AP649e.f3b3.5f88
Show version failing wap
==================================================================================
Cisco IOS Software, C1140 Software (C1140-K9W8-M), Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Tue 18-Oct-11 14:52 by prod_rel_team
ROM: Bootstrap program is C1140 boot loader
BOOTLDR: C1140 Boot Loader (C1140-BOOT-M) Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1)
uptime is 6 minutes
System returned to ROM by power-on
System image file is "flash:/c1140-k9w8-mx.124-23c.JA3/c1140-k9w8-mx.124-23c.JA3"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1142N-E-K9 (PowerPC405ex) processor (revision A0) with 98294K/32768K bytes of memory.
Processor board ID FCZ1548W0GJ
PowerPC405ex CPU at 586Mhz, revision number 0x147E
Last reset from power-on
LWAPP image version 7.0.220.0
1 Gigabit Ethernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 64:9E:F3:B3:5F:88
Part Number : 73-12836-03
PCA Assembly Number : 800-33767-03
PCA Revision Number : A0
PCB Serial Number : FOC15443W5A
Top Assembly Part Number : 800-33775-02
Top Assembly Serial Number : FCZ1548W0GJ
Top Revision Number : A0
Product/Model Number : AIR-LAP1142N-E-K9
Configuration register is 0xF
show inventory failing wap
==================================================================================
NAME: "AP1140", DESCR: "Cisco Aironet 1140 Series (IEEE 802.11n) Access Point"
PID: AIR-LAP1142N-E-K9
Message was edited by: Jeroen -
Cisco 7925 not joining WLAN Network
hi
I have one 7925G-E phone, 1142-E LAP & WLC 5508 & CME 71. in a 3900 router. I am trying to join the phone with CME but the
phone is not joining the WLAN network.
showing error msg connection failed, i have tried with WEP, Open, Open+WEP option on the phone and WLC but still facing problem,.
Thanks
Saurav
I have tried with WPA-PSK and tried the notebook to join it is joining but the Phone is not joiining getting the same error.
connection failed.
*May 02 15:37:52.629: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:37:52.629: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:37:52.628: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:37:52.628: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:37:52.628: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:37:52.628: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:37:52.626: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:37:52.626: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:37:52.625: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:37:52.625: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:37:52.623: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:37:52.623: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:27:36.864: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:27:36.864: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:27:36.863: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:27:36.863: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:27:36.861: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:27:36.861: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:27:36.859: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:27:36.859: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:27:36.857: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:27:36.857: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:27:36.856: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:27:36.855: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:22:35.811: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:22:35.811: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:22:35.809: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:22:35.809: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:22:35.808: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:22:35.808: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:22:35.806: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:22:35.806: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:22:35.804: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:22:35.804: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:22:35.802: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:22:35.802: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:18:32.227: %APF-1-PROC_RSN_WARP_IE_FAILED: apf_80211.c:2235 Could not process the RSN and WARP IEs. station not using WPA or WPA2 on WLAN requiring WPA and/or WPA2.MobileStation: 00:21:6b:39:a1:ac, SSID:voip,AP: c4:7d:4f:4b:a4:40.
*May 02 15:18:32.082: %APF-1-PROC_RSN_WARP_IE_FAILED: apf_80211.c:2235 Could not process the RSN and WARP IEs. station not using WPA or WPA2 on WLAN requiring WPA and/or WPA2.MobileStation: 00:21:6b:39:a1:ac, SSID:voip,AP: c4:7d:4f:4b:a4:40.
*May 02 15:18:31.995: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:18:31.995: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:18:31.993: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:18:31.993: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:18:31.992: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:18:31.992: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:18:31.989: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:18:31.989: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:18:31.984: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:18:31.984: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:18:31.979: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:18:31.979: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:17:49.474: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a6:d0
*May 02 15:17:49.474: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a6:d0
*May 02 15:17:49.472: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a4:40
*May 02 15:17:49.472: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a4:40
*May 02 15:17:49.470: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:98:40
*May 02 15:17:49.470: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:98:40
*May 02 15:17:49.468: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f1:b0
*May 02 15:17:49.468: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f1:b0
*May 02 15:17:49.465: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f0:d0
*May 02 15:17:49.465: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f0:d0
*May 02 15:17:49.460: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:e3:80
*May 02 15:17:49.460: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:e3:80
*May 02 15:17:49.457: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:17:49.457: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:17:49.456: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:17:49.456: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:17:49.452: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:17:49.452: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:17:49.447: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:17:49.447: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:17:49.443: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:17:49.443: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:17:49.440: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:17:49.440: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:16:24.677: %APF-1-DISCONECT_MOBILE_DUE_TO_WLAN_SW: apf_policy.c:541 Disconnecting mobile 00:21:6b:39:a1:ac due to switch of WLANs from 6(cisco_test) to 7(voip)
*May 02 15:14:20.572: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a6:d0
*May 02 15:14:20.572: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a6:d0
*May 02 15:14:20.571: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a4:40
*May 02 15:14:20.571: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a4:40
*May 02 15:14:20.571: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:98:40
*May 02 15:14:20.571: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:98:40
*May 02 15:14:20.569: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f1:b0
*May 02 15:14:20.569: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f1:b0
*May 02 15:14:20.569: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f0:d0
*May 02 15:14:20.569: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f0:d0
*May 02 15:14:20.568: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:e3:80
*May 02 15:14:20.568: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:e3:80
*May 02 15:14:20.568: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:14:20.568: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:14:20.568: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:14:20.568: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:14:20.567: %APF-3-SET_VAP_STATUS_FAILED: apf_api.c:15464 Could not Set the Status of Virtual Access point Entry.Encryption mode for static WEP does not match encryption mode for dynamic WEP on WLAN.Static WEP:1.Dynamic WEP:2. WLAN:'voip'
*May 02 15:14:20.566: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:14:20.566: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:14:20.564: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:14:20.564: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:14:20.562: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:14:20.562: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:14:20.560: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:14:20.560: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:08:45.139: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a6:d0
*May 02 15:08:45.139: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a6:d0
*May 02 15:08:45.137: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a4:40
*May 02 15:08:45.137: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a4:40
*May 02 15:08:45.135: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:98:40
*May 02 15:08:45.135: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:98:40
*May 02 15:08:45.134: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f1:b0
*May 02 15:08:45.133: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f1:b0
*May 02 15:08:45.132: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f0:d0
*May 02 15:08:45.132: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f0:d0
*May 02 15:08:45.131: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:e3:80
*May 02 15:08:45.130: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:e3:80
*May 02 15:08:45.129: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:08:45.129: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:08:45.128: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:08:45.128: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:08:45.126: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:08:45.126: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:08:45.124: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:08:45.124: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:08:45.122: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:08:45.122: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:08:45.120: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:08:45.120: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:08:43.623: %APF-1-DISCONECT_MOBILE_DUE_TO_WLAN_SW: apf_policy.c:541 Disconnecting mobile 00:21:6b:39:a1:ac due to switch of WLANs from 4(CGC-7FL-WLAN) to 6(cisco_test)
*May 02 15:07:35.339: %APF-1-DISCONECT_MOBILE_DUE_TO_WLAN_SW: apf_policy.c:541 Disconnecting mobile 00:21:6b:39:a1:ac due to switch of WLANs from 7(voip) to 4(CGC-7FL-WLAN)
*May 02 15:06:55.072: %AAA-3-EAPMETHOD_ADD_FAILED: localeap_db.c:2716 Unable to add method 'peap' to EAP profile for user 'test'. method already exist.
*May 02 15:06:55.072: %AAA-3-EAPMETHOD_ADD_FAILED: localeap_db.c:2716 Unable to add method 'tls' to EAP profile for user 'test'. method already exist.
*May 02 15:06:55.072: %AAA-3-EAPMETHOD_ADD_FAILED: localeap_db.c:2716 Unable to add method 'fast' to EAP profile for user 'test'. method already exist.
*May 02 15:06:55.072: %AAA-3-EAPMETHOD_ADD_FAILED: localeap_db.c:2716 Unable to add method 'leap' to EAP profile for user 'test'. method already exist.
*May 02 15:06:27.672: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2872 Max EAP identity request retries (3) exceeded for client 00:21:6b:39:a1:ac
*May 02 15:05:27.648: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2872I have tried with WPA-PSK and tried the notebook to join it is joining but the Phone is not joiining getting the same error.
connection failed.
*May 02 15:37:52.629: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:37:52.629: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:37:52.628: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:37:52.628: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:37:52.628: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:37:52.628: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:37:52.626: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:37:52.626: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:37:52.625: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:37:52.625: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:37:52.623: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:37:52.623: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:27:36.864: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:27:36.864: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:27:36.863: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:27:36.863: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:27:36.861: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:27:36.861: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:27:36.859: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:27:36.859: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:27:36.857: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:27:36.857: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:27:36.856: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:27:36.855: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:22:35.811: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:22:35.811: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:22:35.809: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:22:35.809: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:22:35.808: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:22:35.808: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:22:35.806: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:22:35.806: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:22:35.804: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:22:35.804: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:22:35.802: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:22:35.802: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:18:32.227: %APF-1-PROC_RSN_WARP_IE_FAILED: apf_80211.c:2235 Could not process the RSN and WARP IEs. station not using WPA or WPA2 on WLAN requiring WPA and/or WPA2.MobileStation: 00:21:6b:39:a1:ac, SSID:voip,AP: c4:7d:4f:4b:a4:40.
*May 02 15:18:32.082: %APF-1-PROC_RSN_WARP_IE_FAILED: apf_80211.c:2235 Could not process the RSN and WARP IEs. station not using WPA or WPA2 on WLAN requiring WPA and/or WPA2.MobileStation: 00:21:6b:39:a1:ac, SSID:voip,AP: c4:7d:4f:4b:a4:40.
*May 02 15:18:31.995: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:18:31.995: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:18:31.993: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:18:31.993: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:18:31.992: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:18:31.992: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:18:31.989: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:18:31.989: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:18:31.984: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:18:31.984: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:18:31.979: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:18:31.979: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:17:49.474: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a6:d0
*May 02 15:17:49.474: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a6:d0
*May 02 15:17:49.472: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a4:40
*May 02 15:17:49.472: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a4:40
*May 02 15:17:49.470: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:98:40
*May 02 15:17:49.470: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:98:40
*May 02 15:17:49.468: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f1:b0
*May 02 15:17:49.468: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f1:b0
*May 02 15:17:49.465: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f0:d0
*May 02 15:17:49.465: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f0:d0
*May 02 15:17:49.460: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:e3:80
*May 02 15:17:49.460: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:e3:80
*May 02 15:17:49.457: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:17:49.457: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:17:49.456: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:17:49.456: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:17:49.452: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:17:49.452: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:17:49.447: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:17:49.447: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:17:49.443: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:17:49.443: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:17:49.440: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:17:49.440: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:16:24.677: %APF-1-DISCONECT_MOBILE_DUE_TO_WLAN_SW: apf_policy.c:541 Disconnecting mobile 00:21:6b:39:a1:ac due to switch of WLANs from 6(cisco_test) to 7(voip)
*May 02 15:14:20.572: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a6:d0
*May 02 15:14:20.572: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a6:d0
*May 02 15:14:20.571: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a4:40
*May 02 15:14:20.571: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a4:40
*May 02 15:14:20.571: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:98:40
*May 02 15:14:20.571: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:98:40
*May 02 15:14:20.569: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f1:b0
*May 02 15:14:20.569: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f1:b0
*May 02 15:14:20.569: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f0:d0
*May 02 15:14:20.569: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f0:d0
*May 02 15:14:20.568: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:e3:80
*May 02 15:14:20.568: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:e3:80
*May 02 15:14:20.568: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:14:20.568: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:14:20.568: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:14:20.568: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:14:20.567: %APF-3-SET_VAP_STATUS_FAILED: apf_api.c:15464 Could not Set the Status of Virtual Access point Entry.Encryption mode for static WEP does not match encryption mode for dynamic WEP on WLAN.Static WEP:1.Dynamic WEP:2. WLAN:'voip'
*May 02 15:14:20.566: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:14:20.566: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:14:20.564: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:14:20.564: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:14:20.562: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:14:20.562: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:14:20.560: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:14:20.560: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:08:45.139: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a6:d0
*May 02 15:08:45.139: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a6:d0
*May 02 15:08:45.137: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a4:40
*May 02 15:08:45.137: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:a4:40
*May 02 15:08:45.135: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:98:40
*May 02 15:08:45.135: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:4b:98:40
*May 02 15:08:45.134: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f1:b0
*May 02 15:08:45.133: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f1:b0
*May 02 15:08:45.132: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f0:d0
*May 02 15:08:45.132: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:f0:d0
*May 02 15:08:45.131: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:e3:80
*May 02 15:08:45.130: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP c4:7d:4f:46:e3:80
*May 02 15:08:45.129: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:08:45.129: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e9:90
*May 02 15:08:45.128: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:08:45.128: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e8:b0
*May 02 15:08:45.126: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:08:45.126: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e5:c0
*May 02 15:08:45.124: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:08:45.124: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:0d:e2:50
*May 02 15:08:45.122: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:08:45.122: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:70
*May 02 15:08:45.120: %LWAPP-3-WLAN_ERR2: spam_lrad.c:20904 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:08:45.120: %LWAPP-3-WLAN_ERR2: spam_lrad.c:21261 Unable to find WLAN 7 to be deleted; AP 00:3a:98:08:2f:60
*May 02 15:08:43.623: %APF-1-DISCONECT_MOBILE_DUE_TO_WLAN_SW: apf_policy.c:541 Disconnecting mobile 00:21:6b:39:a1:ac due to switch of WLANs from 4(CGC-7FL-WLAN) to 6(cisco_test)
*May 02 15:07:35.339: %APF-1-DISCONECT_MOBILE_DUE_TO_WLAN_SW: apf_policy.c:541 Disconnecting mobile 00:21:6b:39:a1:ac due to switch of WLANs from 7(voip) to 4(CGC-7FL-WLAN)
*May 02 15:06:55.072: %AAA-3-EAPMETHOD_ADD_FAILED: localeap_db.c:2716 Unable to add method 'peap' to EAP profile for user 'test'. method already exist.
*May 02 15:06:55.072: %AAA-3-EAPMETHOD_ADD_FAILED: localeap_db.c:2716 Unable to add method 'tls' to EAP profile for user 'test'. method already exist.
*May 02 15:06:55.072: %AAA-3-EAPMETHOD_ADD_FAILED: localeap_db.c:2716 Unable to add method 'fast' to EAP profile for user 'test'. method already exist.
*May 02 15:06:55.072: %AAA-3-EAPMETHOD_ADD_FAILED: localeap_db.c:2716 Unable to add method 'leap' to EAP profile for user 'test'. method already exist.
*May 02 15:06:27.672: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2872 Max EAP identity request retries (3) exceeded for client 00:21:6b:39:a1:ac
*May 02 15:05:27.648: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2872 -
3502i APs not joining controller
So basically my infrastructure consists of four 4402 WLCs running on 7.0.235.3. I'm trying to get new access points to join to the environment, but I am having difficulty doing so. All currently joined APs work fine and are operating well. I'm getting a red, green, off blink code which means it's trying to join, but never does. The other one I get a constantly blinking green but it never joins either. I've setup option 43 in DHCP, added cisco-capwap-controller entries in DNS thinking it was because those are missing, and still cannot get these two access points to join. Can anyone think why it would not be joining?
The access points and WLC are all on the Same VLAN by the way.Hello,
In a Cisco Unified Wireless network, the LAPs must first discover and join a WLC before they can service wireless clients.
Originally, the controllers only operated in Layer 2 mode. In Layer 2 mode, the LAPs are required to be on the same subnet as the management interface and the Layer 3 mode AP-manager interface is not present on the controller. The LAPs communicate with the controller using Layer 2 encapsulation only (ethernet encapsulation) and do not Dynamic Host Configuration Protocol (DHCP) an IP address.
When Layer 3 mode on the controller was developed, a new Layer 3 interface called AP-manager was introduced. In Layer 3 mode, the LAPs would DHCP an IP address first and then send their discovery request to the management interface using IP addresses (Layer 3). This allowed the LAPs to be on a different subnet than the management interface of the controller. Layer 3 mode is the dominate mode today. Some controllers and LAPs can only perform Layer 3 mode.
However, this presented a new problem: how did the LAPs find the management IP address of the controller when it was on a different subnet?
In Layer 2 mode, they were required to be on the same subnet. In Layer 3 mode, the controller and LAP are essentially playing hide and seek in the network. If you do not tell the LAP where the controller is via DHCP option 43, DNS resolution of "Cisco-lwapp-controller@local_domain", or statically configure it, the LAP does not know where in the network to find the management interface of the controller.
In addition to these methods, the LAP does automatically look on the local subnet for controllers with a 255.255.255.255 local broadcast. Also, the LAP remembers the management IP address of any controller it joins across reboots. Therefore, if you put the LAP first on the local subnet of the management interface, it will find the controller's management interface and remember the address. This is called priming. This does not help find the controller if you replace a LAP later on. Therefore, Cisco recommends using the DHCP option 43 or DNS methods.
When the LAPs discover the controller, they do not know if the controller is in Layer 2 mode or Layer 3 mode. Therefore, the LAPs always connect to the management interface address of the controller first with a discovery request. The controller then tells the LAP which mode it is in the discovery reply. If the controller is in Layer 3 mode, the discovery reply contains the Layer 3 AP-manager IP address so the LAP can send a join request to the AP-manager interface next.
Note: By default both management and AP-manager interfaces are left untagged on their VLAN during configuration. In case these are tagged, make sure they are tagged to the same VLAN in order to properly receive discovery and join response from the WLC.
The LWAPP AP goes through this process on startup for Layer 3 mode:
The LAP boots and DHCPs an IP address if it was not previously assigned a static IP address.
The LAP sends discovery requests to controllers through the various discovery algorithms and builds a controller list. Essentially, the LAP learns as many management interface addresses for the controller list as possible via:
DHCP option 43 (good for global companies where offices and controllers are on different continents)
DNS entry for cisco-capwap-controller (good for local businesses - can also be used to find where brand new APs join)
Note: If you use CAPWAP, make sure that there is a DNS entry for cisco-capwap-controller.
Management IP addresses of controllers the LAP remembers previously
A Layer 3 broadcast on the subnet
Over the air provisioning
Statically configured information
From this list, the easiest method to use for deployment is to have the LAPs on the same subnet as the management interface of the controller and allow the LAP’s Layer 3 broadcast to find the controller. This method should be used for companies that have a small network and do not own a local DNS server.
The next easiest method of deployment is to use a DNS entry with DHCP. You can have multiple entries of the same DNS name. This allows the LAP to discover multiple controllers. This method should be used by companies that have all of their controllers in a single location and own a local DNS server. Or, if the company has multiple DNS suffixes and the controllers are segregated by suffix.
DHCP option 43 is used by large companies to localize the information via the DHCP. This method is used by large enterprises that have a single DNS suffix. For example, Cisco owns buildings in Europe, Australia, and the United States. In order to ensure that the LAPs only join controllers locally, Cisco cannot use a DNS entry and must use DHCP option 43 information to tell the LAPs what the management IP address of their local controller is.
Finally, static configuration is used for a network that does not have a DHCP server.You can statically configure the information necessary to join a controller via the console port and the AP’s CLI. For information on how to statically configure controller information using the AP CLI, refer to Manually Configuring Controller Information Using the Access Point CLI.
For a detailed explanation on the different discovery algorithms that LAPs use to find controllers, refer to LAP Registration with WLC.
For information on configuring DHCP option 43 on a DHCP server, refer to DHCP OPTION 43 for Lightweight Cisco Aironet Access Points Configuration Example.
Send a discovery request to every controller on the list and wait for the controller's discovery reply which contains the system name, AP-manager IP addresses, the number of APs already attached to each AP-manager interface, and overall excess capacity for the controller.
Look at the controller list and send a join request to a controller in this order (only if the AP received a discovery reply from it):
Primary Controller system name (previously configured on LAP)
Secondary Controller system name (previously configured on LAP)
Tertiary Controller system name (previously configured on LAP)
Master controller (if the LAP has not been previously configured with any Primary, Secondary, or Tertiary controller names. Used to always know which controller brand new LAPs join)
If none of the above are seen, load balance across controllers using the excess capacity value in the discovery response.
If two controllers have the same excess capacity, then send the join request to the first controller that responded to the discovery request with a discovery response. If a single controller has multiple AP-managers on multiple interfaces, choose the AP-manager interface with the least number of APs.
The controller will respond to all discovery requests without checking certificates or AP credentials. However, join requests must have a valid certificate in order to get a join response from the controller. If the LAP does not receive a join response from its choice, the LAP will try the next controller in the list unless the controller is a configured controller (Primary/Secondary/Tertiary).
When it receives the join reply, the AP checks to make sure it has the same image as that of the controller. If not, the AP downloads the image from the controller and reboots to load the new image and starts the process all over again from step 1.
If it has the same software image, it asks for the configuration from the controller and moves into the registered state on the controller.
After you download the configuration, the AP might reload again to apply the new configuration. Therefore, an extra reload can occur and is a normal behavior. -
AIR-CAP3502I-E-K9 does not join preferred controller
I have an AIR-CAP3502I-E-K9 AP that is configured for two WLAN controllers with preferred order. However the AP does not join the primary controller, but uses the secondary one instead. I have a bunch of these AIR-CAP3502I-E-K9s , majority work fine, but three of them not.
I have tried commands according to
https://supportforums.cisco.com/docs/DOC-24917
In the controller's GUI the order is properly configured. I also tried to use 'Clear All Config" option on the controller and configured the AP from the scratch, but this did not help.
Here is what I have
XXXX#sh capwap client config
configMagicMark 0xF1E2D3C4
chkSumV2 30883
chkSumV1 1073
swVer 7.2.111.3
adminState ADMIN_ENABLED(1)
name XXXX
location YYYY
group name
mwarName ZZZZ1
mwarIPAddress 192.168.1.1
mwarName ZZZZ2
mwarIPAddress 192.168.1.2
mwarName
mwarIPAddress 0.0.0.0
ssh status Enabled
Telnet status Enabled
numOfSlots 2
spamRebootOnAssert 1
spamStatTimer 180
randSeed 0xBAC2
transport SPAM_TRANSPORT_L3(2)
transportCfg SPAM_TRANSPORT_DEFAULT(0)
initialisation SPAM_PRODUCTION_DISCOVERY(1)
ApMode Local
ApSubMode Not Configured
AP Rogue Detection Mode Enabled
OfficeExtend AP [0] Disabled
OfficeExtend AP JoinMode[0] Standard
Discovery Timer 10 secs
Heart Beat Timer 30 secs
Led State Enabled 1
Primed Interval 0
AP ILP Pre-Standard Switch Support Disabled
AP Power Injector Disabled
Infrastructure MFP validation Disabled
Configured Switch 1 Addr 192.168.1.2
Configured Switch 2 Addr 192.168.1.1
non-occupancy channels:
Ethernet (Duplex/Speed) auto/auto
*Mar 1 00:14:23.001: %CAPWAP-3-ERRORLOG: Selected MWAR 'ZZZZ2'(index 1).
*Mar 1 00:14:23.001: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Aug 22 12:21:57.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.2 peer_port: 5246
*Aug 22 12:21:57.581: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.1.2 peer_port: 5246
*Aug 22 12:21:57.581: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.2
My primary one is 192.168.1.1 and secondary is 192.168.1.2, but the AP joins always the secondary one.
The lines above
Configured Switch 1 Addr 192.168.1.2
Configured Switch 2 Addr 192.168.1.1
seem to be suspicious, I would expect the reverse order, but do not know how the code did it.
The only guess is that in the very beginning the AP joined 192.168.1.2, and this was the controller I configured the AP initially from. The AP seems to maybe somehow remember this.
OS version is
swVer 7.2.111.3
Thanks,
VladYes, this is what I am trying all the time - configure the AP to point to the WLCs I want it to join.
Firstly I did through GUI, did not work.
Secondly I used 'Clear All Config" option on the controller and configured the AP from the scratch through GUI, did not work.
Thirdly I tried through command line on the AP, did not work.
I used these commands
XXXX#capwap ap primary-base ZZZZ1 192.168.1.1
XXXX#capwap ap secondary-base ZZZZ2 192.168.1.2
XXXX#sh capwap client config
configMagicMark 0xF1E2D3C4
chkSumV2 30883
chkSumV1 1072
swVer 7.2.111.3
adminState ADMIN_ENABLED(1)
name XXXX
location YYYY
group name
mwarName ZZZZ1
mwarIPAddress 192.168.1.1
mwarName ZZZZ2
mwarIPAddress 192.168.1.2
mwarName
mwarIPAddress 0.0.0.0
ssh status Enabled
Telnet status Enabled
numOfSlots 2
spamRebootOnAssert 1
spamStatTimer 180
randSeed 0xBAC2
transport SPAM_TRANSPORT_L3(2)
transportCfg SPAM_TRANSPORT_DEFAULT(0)
initialisation SPAM_PRODUCTION_DISCOVERY(1)
ApMode Local
ApSubMode Not Configured
AP Rogue Detection Mode Enabled
OfficeExtend AP [0] Disabled
OfficeExtend AP JoinMode[0] Standard
Discovery Timer 10 secs
Heart Beat Timer 30 secs
Led State Enabled 1
Primed Interval 0
AP ILP Pre-Standard Switch Support Disabled
AP Power Injector Disabled
Infrastructure MFP validation Disabled
Configured Switch 1 Addr 192.168.1.2
Configured Switch 2 Addr 192.168.1.1
non-occupancy channels:
Ethernet (Duplex/Speed) auto/auto
XXXX#sh log
Syslog logging: enabled (1 messages dropped, 8 messages rate-limited,
0 flushes, 0 overruns, xml disabled, filtering disabled)
Console logging: level debugging, 61 messages logged, xml disabled,
filtering disabled
Monitor logging: level debugging, 0 messages logged, xml disabled,
filtering disabled
Buffer logging: level debugging, 67 messages logged, xml disabled,
filtering disabled
Logging Exception size (4096 bytes)
Count and timestamp logging messages: disabled
Trap logging: level emergencies, 0 message lines logged
Logging to 255.255.255.255(global) (udp port 514, audit disabled, link down), 0 message lines logged, xml disabled,
filtering disabled
Log Buffer (1048576 bytes):
*Mar 1 00:00:09.424: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:09.434: *** CRASH_LOG = YES
*Mar 1 00:00:09.434: 64bit PCIE devicesSecurity Core found.
Base Ethernet MAC address: E0:5F:B9:A8:00:7F
*Mar 1 00:00:12.482: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:13.731: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:13.797: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:16.996: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:17.052: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1024 messages)
*Mar 1 00:00:17.068: status of voice_diag_test from WLC is false
*Mar 1 00:00:19.182: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3500 Software (AP3G1-K9W8-M), Version 12.4(25e)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 14-Sep-12 19:13 by prod_rel_team
*Mar 1 00:00:19.182: %SNMP-5-COLDSTART: SNMP agent on host XXXX is undergoing a cold start
*Mar 1 00:13:33.342: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:13:33.342: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:13:33.493: status of voice_diag_test from WLC is false
*Mar 1 00:13:33.632: %SSH-5-ENABLED: SSH 2.0 has been enabledlwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:13:33.956: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:13:34.343: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:13:34.343: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:13:36.029: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:13:41.484: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 192.168.1.21, mask 255.255.255.0, hostname XXXX
*Mar 1 00:13:51.981: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:14:01.997: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar 1 00:14:06.099: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:14:07.190: %LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:14:08.191: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:14:08.288: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:14:09.289: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:14:11.000: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar 1 00:14:23.001: %CAPWAP-3-ERRORLOG: Selected MWAR 'ZZZZ2'(index 1).
*Mar 1 00:14:23.001: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Aug 23 06:07:13.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.1.2 peer_port: 5246
*Aug 23 06:07:13.578: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.1.2 peer_port: 5246
*Aug 23 06:07:13.578: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.1.2
*Aug 23 06:07:14.025: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to down
*Aug 23 06:07:14.091: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Aug 23 06:07:14.094: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller ZZZZ2
*Aug 23 06:07:14.154: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
What I think might be the key to the problem is this
Configured Switch 1 Addr 192.168.1.2
Configured Switch 2 Addr 192.168.1.1
This is not changing no matter what I do.
Thanks,
Vlad -
3702i AP's not Joining WLC - Layer 3 discovery request not received on management VLAN
Hi Guys,
This is a follow up post to this thread: https://supportforums.cisco.com/discussion/12400481/3702i-not-joint-2504
Have been playing around with my AP's and made sure the time is correct on all the devices ( WLC and Switch). I have also moved the AP's to the same Vlan as the management IP of the WLC.
if I move the AP's to the same Vlan as the WLC they join and are happy, as soon as I move them to a different Vlan they cant join and there time goes back to the default plus they do not seem to save the WLC details to flash but still remember the test names I give them.
it appears that option 43 is working fine as I can see it look for the WLC IP and I have done some trouble shooting on the WLC and it looks like it see's the AP but doesn't except it.
please see below for the boot up of the AP and the WLC logs:
AP
IIOS Bootloader - Starting system.
*** deleted for breverity *****
Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1"...#########################
File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Montserrat Board
*** deleted for breverity *****
Boot CMD: 'boot flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1;flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1'
Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1"...###############################################
File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1" uncompressed and installed, entry point: 0x1003000
executing...
*** deleted for breverity *****
cisco AIR-CAP3702I-Z-K9 (PowerPC) processor (revision A0) with 376810K/134656K bytes of memory.
Processor board ID FGL1838X4T1
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 8.0.110.0
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: F4:4E:05:B7:1E:84
Part Number : 73-15243-01
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : FOC18343WPR
Top Assembly Part Number : 068-05054-03
Top Assembly Serial Number : FGL1838X4T1
Top Revision Number : A0
Product/Model Number : AIR-CAP3702I-Z-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:19.295: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
*Mar 1 00:00:19.755: Registering HW DTLS
*Mar 1 00:00:19.763: APAVC: Initial WLAN Buffers Given to System is 2500
*Mar 1 00:00:19.815: APAVC: WlanPAKs 42878 RadioPaks 42270
*Mar 1 00:00:22.127: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:26.055: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:26.167: Loading Power Tables from ram:/Q2.bin. Class = A
*Mar 1 00:00:26.167: record size of 3ss: 1168 read_ptr: 4F9698E
*Mar 1 00:00:31.207: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:31.251: Loading Power Tables from ram:/Q5.bin. Class = Z
*Mar 1 00:00:31.251: record size of vht: 2904 read_ptr: 4F9698E
*Mar 1 00:00:31.407: Wait until the stile protocol list is initialized.
*Mar 1 00:00:32.651: Start STILE Activation
*Mar 1 00:00:34.571: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 00:00:35.447: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3700 Software (AP3G2-K9W8-M), Version 15.3(3)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 19-Dec-14 11:20 by prod_rel_team
*Mar 1 00:00:35.447: %SNMP-5-COLDSTART: SNMP agent on host Test_1 is undergoing a cold start
*Mar 1 00:00:36.563: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:37.787: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to uplwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:37.939: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:37.939: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:47.567: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Mar 1 00:00:48.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
*Mar 1 00:00:50.431: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (2-16)
*Mar 1 00:00:50.431: DPAA Initialization Complete
*Mar 1 00:00:50.431: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Mar 1 00:00:51.431: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:53.435: %LINK-6-UPDOWN: Interface BVI1, changed state to up
*Mar 1 00:00:53.867: Currently running a Release Image
*Mar 1 00:00:54.287: Incorrect certificate in SHA2 PB !
*Mar 1 00:00:54.287: Using SHA-1 signed certificate for image signing validation.
*Mar 1 00:00:54.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:59.787: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.2, mask 255.255.255.0, hostname Test_1
*Mar 1 00:01:02.707: APAVC: Succeeded to activate all the STILE protocols.
*Mar 1 00:01:02.707: APAVC: Registering with CFT
*Mar 1 00:01:02.707: APAVC: CFT registration of delete callback succeeded
*Mar 1 00:01:02.707: APAVC: Reattaching Original Buffer pool for system use
*Mar 1 00:01:02.707: Pool-ReAtach: paks 42878 radio42270
%Default route without gateway, if not a point-to-point interface, may impact performance
*Mar 1 00:01:10.103: AP image integrity check PASSED
*Mar 1 00:01:10.187: Incorrect certificate in SHA2 PB !
*Mar 1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:01:11.591: %CDP_PD-4-POWER_OK: 15.4 W power - NEGOTIATED inline power source
*Mar 1 00:01:12.691: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:01:13.691: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:01:13.947: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:01:14.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:01:20.211: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 514 CLI Request Triggered
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:01:31.215: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
*Mar 1 00:02:11.599: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:02:11.603: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Mar 1 00:02:11.611: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:02:12.603: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:02:12.639: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:02:12.647: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Mar 1 00:02:12.655: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:02:13.639: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:02:13.647: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:02:13.699: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:02:14.699: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
Not in Bound state.
*Mar 1 00:02:44.719: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:02:49.839: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.3, mask 255.255.255.0, hostname Test_1
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:02:55.719: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
Not in Bound state.
*Mar 1 00:03:59.219: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:04:04.343: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.4, mask 255.255.255.0, hostname Test_1
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:04:10.223: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
WLC:
isco Controller) >show time
Time............................................. Tue Jan 27 17:44:47 2015
Timezone delta................................... 0:0
Timezone location................................ (GMT +8:00) HongKong, Bejing, Chongquing
NTP Servers
NTP Polling Interval......................... 3600
Index NTP Key Index NTP Server NTP Msg Auth Status
1 0 150.101.176.226 AUTH DISABLED
(Cisco Controller) >show ap join stats summary
Incorrect input! Use 'show ap join stats summary [all/<ap-mac>]'
(Cisco Controller) >show ap join stats summary all
Number of APs.............................................. 2
Base Mac AP EthernetMac AP Name IP Address Status
f4:4e:05:aa:a6:a0 f4:4e:05:94:c3:98 APf44e.0594.c398 10.1.1.22 Joined
f4:4e:05:b6:ce:f0 N A Test_1 10.1.20.7 Not Joined
(Cisco Controller) >show ap join stats detailed f4:4e:05:b6:ce:f0
Sync phase statistics
- Time at sync request received............................ Not applicable
- Time at sync completed................................... Not applicable
Discovery phase statistics
- Discovery requests received.............................. 45
- Successful discovery responses sent...................... 21
- Unsuccessful discovery request processing................ 24
- Reason for last unsuccessful discovery attempt........... Layer 3 discovery request not received on management VLAN
- Time at last successful discovery attempt................ Jan 27 17:45:49.705
- Time at last unsuccessful discovery attempt.............. Jan 27 17:45:49.705
Join phase statistics
- Join requests received................................... 0
- Successful join responses sent........................... 0
- Unsuccessful join request processing..................... 0
- Reason for last unsuccessful join attempt................ Not applicable
- Time at last successful join attempt..................... Not applicable
- Time at last unsuccessful join attempt................... Not applicable
Configuration phase statistics
--More-- or (q)uit
- Configuration requests received.......................... 0
- Successful configuration responses sent.................. 0
- Unsuccessful configuration request processing............ 0
- Reason for last unsuccessful configuration attempt....... Not applicable
- Time at last successful configuration attempt............ Not applicable
- Time at last unsuccessful configuration attempt.......... Not applicable
Last AP message decryption failure details
- Reason for last message decryption failure............... Not applicable
Last AP disconnect details
- Reason for last AP connection failure.................... Not applicable
- Last AP disconnect reason................................ Not applicable
Last join error summary
- Type of error that occurred last......................... Lwapp discovery request rejected
- Reason for error that occurred last...................... Layer 3 discovery request not received on management VLAN
- Time at which the last join error occurred............... Jan 27 17:45:49.705
AP disconnect details
- Reason for last AP connection failure.................... Not applicable
Ethernet Mac : 00:00:00:00:00:00 Ip Address : 10.1.20.7
(Cisco Controller) >show interface summary
Number of Interfaces.......................... 4
Interface Name Port Vlan Id IP Address Type Ap Mgr Guest
ap LAG 20 10.1.20.231 Dynamic No No
guest LAG 30 10.1.30.231 Dynamic No No
management LAG 10 10.1.1.231 Static Yes No
virtual N/A N/A 1.1.1.1 Static No No
SWITCH
witch#show run
Building configuration...
*** deleted for breverity *****
no aaa new-model
clock timezone AWST 8
system mtu routing 1500
ip routing
ip dhcp pool WAP_Pool
network 10.1.20.0 255.255.255.0
default-router 10.1.20.1
option 43 hex f104.0a01.01e7
ip dhcp pool Clients
network 10.1.30.0 255.255.255.0
default-router 10.1.30.1
dns-server 203.0.178.191
ip dhcp pool test
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
crypto pki trustpoint TP-self-signed-4082587776
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-4082587776
revocation-check none
rsakeypair TP-self-signed-4082587776
*** deleted for breverity *****
*** deleted for breverity ***** !
interface FastEthernet0/3
description *** WLC ****
switchport trunk encapsulation dot1q
switchport mode trunk
interface FastEthernet0/4
description **** AP *****
switchport access vlan 20
switchport mode access
spanning-tree portfast
interface FastEthernet0/5
description **** AP ****
switchport access vlan 20
switchport mode access
spanning-tree portfast
interface FastEthernet0/6
i*** deleted for breverity ***** !
interface Vlan10
description *** Managment ***
ip address 10.1.1.230 255.255.255.0
interface Vlan20
description *** WIRELESS APS ***
ip address 10.1.20.1 255.255.255.0
interface Vlan30
ip address 10.1.30.1 255.255.255.0
ip classless
ip route 0.0.0.0 0.0.0.0 10.1.1.1
ip http server
ip http secure-server
ip sla enable reaction-alerts
l*** deleted for breverity *****
ntp clock-period 36028827
ntp source FastEthernet0/1
ntp server 121.0.0.42
ntp server 202.127.210.37
end
I have also placed a Device in Vlan 20 and it is able to ping the WLC and the WLC can ping it s routing is working.
ThanksHey Scott,
I gave that a shot and still no luck, log's from AP boot up:
IIOS Bootloader - Starting system.
flash is writable
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 67 files, 9 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 20894208
flashfs[0]: Bytes available: 20264448
flashfs[0]: flashfs fsck took 20 seconds.
Base Ethernet MAC address: f4:4e:05:b7:1e:84
Ethernet speed is 100 Mb - FULL Duplex
Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1"...#########################
File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Montserrat Board
40MB format
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 67 files, 9 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 20894208
flashfs[0]: Bytes available: 20264448
flashfs[0]: flashfs fsck took 21 seconds.
flashfs[1]: 0 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 12257280
flashfs[1]: Bytes used: 1024
flashfs[1]: Bytes available: 12256256
flashfs[1]: flashfs fsck took 1 seconds.
Base Ethernet MAC address: f4:4e:05:b7:1e:84
Boot CMD: 'boot flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1;flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1'
Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1"...###############################################
File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1" uncompressed and installed, entry point: 0x1003000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3700 Software (AP3G2-K9W8-M), Version 15.3(3)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 19-Dec-14 11:20 by prod_rel_team
Montserrat Board
40MB format
Tide XL MB - 40MB of flash
Initializing flashfs...
flashfs[2]: 67 files, 9 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 40900608
flashfs[2]: Bytes used: 20894208
flashfs[2]: Bytes available: 20006400
flashfs[2]: flashfs fsck took 14 seconds.
flashfs[2]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 0 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
Copy in progress...CCCCC
Copy in progress...CCC
Copy in progress...CCCC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CCCCC
Copy in progress...CCCC
Copy in progress...CC
Uncompressing radio files...
...done Initializing flashfs.
Radio0 present 8764 8000 0 A8000000 A8010000 0
Rate table has 650 entries (20 legacy/224 11n/406 11ac)
POWER TABLE FILENAME = ram:/Q2.bin
Radio1 present 8864 8000 0 80000000 80100000 4
POWER TABLE FILENAME = ram:/Q5.bin
Radio2 not present 0 0 0 0 0 8
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP3702I-Z-K9 (PowerPC) processor (revision A0) with 376810K/134656K bytes of memory.
Processor board ID FGL1838X4T1
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 8.0.110.0
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: F4:4E:05:B7:1E:84
Part Number : 73-15243-01
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : FOC18343WPR
Top Assembly Part Number : 068-05054-03
Top Assembly Serial Number : FGL1838X4T1
Top Revision Number : A0
Product/Model Number : AIR-CAP3702I-Z-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:19.295: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
*Mar 1 00:00:19.755: Registering HW DTLS
*Mar 1 00:00:19.763: APAVC: Initial WLAN Buffers Given to System is 2500
*Mar 1 00:00:19.815: APAVC: WlanPAKs 42878 RadioPaks 42270
*Mar 1 00:00:22.127: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:26.055: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:26.167: Loading Power Tables from ram:/Q2.bin. Class = A
*Mar 1 00:00:26.167: record size of 3ss: 1168 read_ptr: 4F9698E
*Mar 1 00:00:31.207: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:31.251: Loading Power Tables from ram:/Q5.bin. Class = Z
*Mar 1 00:00:31.251: record size of vht: 2904 read_ptr: 4F9698E
*Mar 1 00:00:31.407: Wait until the stile protocol list is initialized.
*Mar 1 00:00:32.651: Start STILE Activation
*Mar 1 00:00:34.571: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 00:00:35.447: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3700 Software (AP3G2-K9W8-M), Version 15.3(3)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 19-Dec-14 11:20 by prod_rel_team
*Mar 1 00:00:35.447: %SNMP-5-COLDSTART: SNMP agent on host Test_1 is undergoing a cold start
*Mar 1 00:00:36.563: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:37.787: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to uplwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:37.939: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:37.939: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:47.567: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Mar 1 00:00:48.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
*Mar 1 00:00:50.431: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (2-16)
*Mar 1 00:00:50.431: DPAA Initialization Complete
*Mar 1 00:00:50.431: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Mar 1 00:00:51.431: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:53.435: %LINK-6-UPDOWN: Interface BVI1, changed state to up
*Mar 1 00:00:53.867: Currently running a Release Image
*Mar 1 00:00:54.287: Incorrect certificate in SHA2 PB !
*Mar 1 00:00:54.287: Using SHA-1 signed certificate for image signing validation.
*Mar 1 00:00:54.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:59.787: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.2, mask 255.255.255.0, hostname Test_1
*Mar 1 00:01:02.707: APAVC: Succeeded to activate all the STILE protocols.
*Mar 1 00:01:02.707: APAVC: Registering with CFT
*Mar 1 00:01:02.707: APAVC: CFT registration of delete callback succeeded
*Mar 1 00:01:02.707: APAVC: Reattaching Original Buffer pool for system use
*Mar 1 00:01:02.707: Pool-ReAtach: paks 42878 radio42270
%Default route without gateway, if not a point-to-point interface, may impact performance
*Mar 1 00:01:10.103: AP image integrity check PASSED
*Mar 1 00:01:10.187: Incorrect certificate in SHA2 PB !
*Mar 1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:01:11.591: %CDP_PD-4-POWER_OK: 15.4 W power - NEGOTIATED inline power source
*Mar 1 00:01:12.691: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:01:13.691: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:01:13.947: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:01:14.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:01:20.211: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 514 CLI Request Triggered
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:01:31.215: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
*Mar 1 00:02:11.599: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:02:11.603: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Mar 1 00:02:11.611: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:02:12.603: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:02:12.639: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:02:12.647: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Mar 1 00:02:12.655: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:02:13.639: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:02:13.647: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:02:13.699: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:02:14.699: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
Not in Bound state.
*Mar 1 00:02:44.719: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:02:49.839: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.3, mask 255.255.255.0, hostname Test_1
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:02:55.719: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
Not in Bound state.
*Mar 1 00:03:59.219: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:04:04.343: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.4, mask 255.255.255.0, hostname Test_1
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:04:10.223: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP -
i am trying to troubleshoot a 2125 WLC alongside a 1252 access point. The access point is not joining and the y both
have the same software image. See logs below:
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 5.2.193.0
RTOS Version..................................... 5.2.193.0
Bootloader Version............................... 4.0.191.0
Emergency Image Version.......................... 6.0.199.4
Build Type....................................... DATA + WPS
System Name...................................... Cisco_f4:f7:c0
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.828
IP Address....................................... 192.168.1.5
System Up Time................................... 6 days 2 hrs 42 mins 39 secs
System Timezone Location.........................
Current Boot License Level.......................
Next Boot License Level..........................
Configured Country............................... SI - Slovenia
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
--More-- or (q)uit
Internal Temperature............................. +49 C
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 3
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 0
Burned-in MAC Address............................ C8:4C:75:F4:F7:C0
(Cisco Controller) >show network summary
RF-Network Name............................. law school
Web Mode.................................... Disable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
Secure Shell (ssh).......................... Enable
Telnet...................................... Disable
Ethernet Multicast Mode..................... Disable
Ethernet Broadcast Mode..................... Disable
AP Multicast Mode........................... Multicast Address : 0.0.0.0
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Disable
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Enable
Mgmt Via Dynamic Interface.................. Enable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
Kindly advice what is missing?
many thanksConsole into the AP and post the output to the following commands:
1. sh version;
2. sh ip interface brief -
Hi all,
I could need a little help troubleshooting some AP issue.
For some reason some AP will not join the WLC. (WISMII)
I have several hundrede AP online, but still a few offline
This fails:
FRH-R06-L226-UX-G#sh cdp nei gi2/0/41 detail
Device ID: AP5057.a8a1.c632
Entry address(es):
IP address: 10.61.24.103
Platform: cisco AIR-CAP3502I-E-K9 , Capabilities: Trans-Bridge (why only Trans-Bridge mode and not Capabilities: Router Trans-Bridge)
Interface: GigabitEthernet2/0/41, Port ID (outgoing port): GigabitEthernet0
Holdtime : 161 sec
Version :
Cisco IOS Software, C3500 Software (AP3G1-RCVK9W8-M), Version 12.4(23c)JA3, RELEASE SOFTWARE (fc1) (yes recovery image I know)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Tue 18-Oct-11 15:02 by prod_rel_team
advertisement version: 2
Duplex: full
Power drawn: 14.500 Watts (will it change when AP come online?)
Power request id: 63919, Power management id: 2
Power request levels are:14500 0 0 0 0
Management address(es):
This works fine:
FRH-R06-L226-UX-G#sh cdp nei gi2/0/26 detail
Device ID: AP442b.03c2.638d
Entry address(es):
IP address: 10.61.24.84
Platform: cisco AIR-CAP3502I-E-K9 , Capabilities: Router Trans-Bridge
Interface: GigabitEthernet2/0/26, Port ID (outgoing port): GigabitEthernet0.1
Holdtime : 128 sec
Version :
Cisco IOS Software, C3500 Software (AP3G1-K9W8-M), Version 15.2(2)JB, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Mon 10-Dec-12 23:33 by prod_rel_team
advertisement version: 2
Duplex: full
Power drawn: 15.400 Watts
Power request id: 45452, Power management id: 2
Power request levels are:15400 14500 0 0 0
Management address(es):
Switchport config:
interface GigabitEthernet2/0/41
description .1X XG-B-41
switchport access vlan 552
switchport mode access
authentication control-direction in
authentication event fail retry 0 action next-method
authentication event server dead action authorize vlan 552
authentication event server dead action authorize voice
authentication host-mode multi-auth
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
mab
dot1x pae authenticator
dot1x timeout quiet-period 5
dot1x timeout tx-period 3
storm-control broadcast level 0.50
storm-control multicast level 0.50
storm-control action shutdown
storm-control action trap
spanning-tree portfast
spanning-tree bpduguard enable
end
I have no access to the console interface on the AP at the moment.
any suggestions
/FinnWell you need to take a look at the AP or console. There have been issues with the 3500's and the white light of death. If you can have someone confirm if the APs led is white or not, that will tell you right away if you need to RMA the ap or not. Other than that, you need to console into the AP and post the output when powering up the AP.
Sent from Cisco Technical Support iPhone App
Maybe you are looking for
-
How to recover a database with archive log
how to recover database with archivle log
-
V$sqlstats and elpased time
Hi all, I have a query executed with hint parrallel 8, SELECT /*+ PARALLEL( D 8) PARALLEL(N 8) PARALLEL(C 8) */ ... When I check the view v$sqlstats to get the elapsed time I found that it gets 14000 seconds to be executed but on real it get 1800 sec
-
Please help me!! As a teacher we use imacs in the school with applworks 6, my husband bought me a 2.4 macbook pro but when i try and install it, it says not supported by the system, the version is 6.0.4, after looking at the forums it appears i need
-
Is Software Update downloading in the background when tethered to an iPhone?
Often I use my laptop tethered to an iPhone 4 and surf the internet through personal hotspot. How can I be sure that Software Update is not downloading huge updates using iPhone's 3G expensive data plan? And if it does, can I prevent it? Thanks!
-
How to invoke a csi bean in an OAF
Hi, Could anyone please drop an idea how to invoke a Csi bean in an OA page. Early responses are appreciated. Thanks in advance. Regards Sudha