Laptop consuming battery fast and a constant flow of heat from CPU

Question

Hello to all.
I'm having similar problems like this one, here using a Dell Vostro 3460, maybe is just some non-windows OS unfriendly hardware. Battery last like 5 or 6 hours on Windows, and just like 2 or 2 and a half on Arch. Will remove battery until there is a solution, and use the laptop only on my workplace.
I have to admit that, I don't know how to disable the discrete video card, I just blacklisted nouveau.
LCD is not hot, there is just constant flow of heat by the ventilation gap (maybe the CPU dissipator?) brightness settings are ok. On windows that heat flow sometimes just stops.
Any help is very appreciated.
Thanks.
sensors:
acpitz-virtual-0
Adapter: Virtual device
temp1: +49.0°C (crit = +106.0°C)
temp2: +49.0°C (crit = +106.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +56.0°C (high = +87.0°C, crit = +105.0°C)
Core 0: +56.0°C (high = +87.0°C, crit = +105.0°C)
Core 1: +53.0°C (high = +87.0°C, crit = +105.0°C)
Core 2: +51.0°C (high = +87.0°C, crit = +105.0°C)
Core 3: +56.0°C (high = +87.0°C, crit = +105.0°C)
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.3-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012
[ 0.000000] Command line: root=UUID=d82f8994-80dd-4a77-b412-e5c80ed3a648 init=/bin/systemd ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000091bff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091c00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a9b07fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a9b08000-0x00000000a9d09fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a9d0a000-0x00000000b8bbcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b8bbd000-0x00000000baeeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baeef000-0x00000000baf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000baf9f000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bf5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Dell Inc. Vostro 3460/0WCY8Y, BIOS A04 05/10/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1bf600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F80000000 write-back
[ 0.000000] 6 base 180000000 mask FC0000000 write-back
[ 0.000000] 7 base 1BF800000 mask FFF800000 uncachable
[ 0.000000] 8 base 1BF600000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff8800000f0100]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbaffffff]
[ 0.000000] [mem 0x00000000-0xbaffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xbaffffff @ [mem 0x1f5f7000-0x1fbd2fff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1bf5fffff]
[ 0.000000] [mem 0x100000000-0x1bf5fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x1bf5fffff @ [mem 0xb8bb5000-0xb8bbcfff]
[ 0.000000] RAMDISK: [mem 0x1fbd3000-0x1fffefff]
[ 0.000000] ACPI: RSDP 00000000000f0120 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000baffe170 0009C (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: FACP 00000000bafee000 000F4 (v03 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: DSDT 00000000baff1000 09EAA (v02 DELL IVB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000baf7c000 00040
[ 0.000000] ACPI: SLIC 00000000baffd000 00176 (v01 DELL QA09 00000002 LOHR 00000001)
[ 0.000000] ACPI: BOOT 00000000baffc000 00028 (v01 00000001 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000baffb000 00166 (v01 DELL PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 00000000baff0000 000A5 (v32 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: HPET 00000000bafed000 00038 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: APIC 00000000bafec000 00098 (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: MCFG 00000000bafeb000 0003C (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 00000000bafea000 00860 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bafe9000 00A92 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000bafe8000 0003E (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: UEFI 00000000bafe7000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: POAT 00000000bafe6000 00055 (v03 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: SSDT 00000000bafe5000 00DD4 (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000bafe4000 0027E (v01 DELL QA09 00000002 LOHR 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bf5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1bf5fffff]
[ 0.000000] NODE_DATA [mem 0x1bf5fc000-0x1bf5fffff]
[ 0.000000] [ffffea0000000000-ffffea0006ffffff] PMD -> [ffff8801b8c00000-ffff8801bebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1bf5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x00090fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xa9b07fff]
[ 0.000000] node 0: [mem 0xa9d0a000-0xb8bbcfff]
[ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x1bf5fffff]
[ 0.000000] On node 0 totalpages: 1539388
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3899 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 735227 pages, LIFO batch:31
[ 0.000000] Normal zone: 12248 pages used for memmap
[ 0.000000] Normal zone: 771624 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000091000 - 0000000000092000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000a9b08000 - 00000000a9d0a000
[ 0.000000] PM: Registered nosave memory: 00000000b8bbd000 - 00000000baeef000
[ 0.000000] PM: Registered nosave memory: 00000000baeef000 - 00000000baf9f000
[ 0.000000] PM: Registered nosave memory: 00000000baf9f000 - 00000000bafff000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff980000
[ 0.000000] PM: Registered nosave memory: 00000000ff980000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801bf200000 s83392 r8192 d23104 u262144
[ 0.000000] pcpu-alloc: s83392 r8192 d23104 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1510750
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=d82f8994-80dd-4a77-b412-e5c80ed3a648 init=/bin/systemd ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 5976800k/7329792k available (4635k kernel code, 1172240k absent, 180752k reserved, 4212k data, 756k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2095.199 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4192.99 BogoMIPS (lpj=6983996)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000029] Security Framework initialized
[ 0.000032] AppArmor: AppArmor disabled by boot time parameter
[ 0.000536] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002814] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003825] Mount-cache hash table entries: 256
[ 0.004001] Initializing cgroup subsys cpuacct
[ 0.004003] Initializing cgroup subsys memory
[ 0.004010] Initializing cgroup subsys devices
[ 0.004011] Initializing cgroup subsys freezer
[ 0.004013] Initializing cgroup subsys net_cls
[ 0.004014] Initializing cgroup subsys blkio
[ 0.004041] CPU: Physical Processor ID: 0
[ 0.004042] CPU: Processor Core ID: 0
[ 0.004047] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.004047] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.004468] mce: CPU supports 9 MCE banks
[ 0.004479] CPU0: Thermal monitoring handled by SMI
[ 0.004486] using mwait in idle threads.
[ 0.005585] ACPI: Core revision 20120320
[ 0.011701] ftrace: allocating 17956 entries in 71 pages
[ 0.021500] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054455] CPU0: Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz stepping 09
[ 0.159031] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.159037] ... version: 3
[ 0.159038] ... bit width: 48
[ 0.159039] ... generic registers: 4
[ 0.159040] ... value mask: 0000ffffffffffff
[ 0.159041] ... max period: 000000007fffffff
[ 0.159042] ... fixed-purpose events: 3
[ 0.159042] ... event mask: 000000070000000f
[ 0.179107] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.204011] CPU1: Thermal monitoring handled by SMI
[ 0.230505] CPU2: Thermal monitoring handled by SMI
[ 0.257129] CPU3: Thermal monitoring handled by SMI
[ 0.283776] CPU4: Thermal monitoring handled by SMI
[ 0.310396] CPU5: Thermal monitoring handled by SMI
[ 0.337033] CPU6: Thermal monitoring handled by SMI
[ 0.192329] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
[ 0.363659] CPU7: Thermal monitoring handled by SMI
[ 0.365735] Brought up 8 CPUs
[ 0.365738] Total of 8 processors activated (33536.98 BogoMIPS).
[ 0.373780] devtmpfs: initialized
[ 0.374895] PM: Registering ACPI NVS region [mem 0xbaeef000-0xbaf9efff] (720896 bytes)
[ 0.375626] NET: Registered protocol family 16
[ 0.375747] ACPI: bus type pci registered
[ 0.375822] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.375824] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.383503] PCI: Using configuration type 1 for base access
[ 0.384102] bio: create slab <bio-0> at 0
[ 0.384149] ACPI: Added _OSI(Module Device)
[ 0.384150] ACPI: Added _OSI(Processor Device)
[ 0.384152] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.384153] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.385637] ACPI: EC: Look up EC in DSDT
[ 0.387100] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.389537] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.390081] ACPI: SSDT 00000000bae8e018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.390462] ACPI: Dynamic OEM Table Load:
[ 0.390465] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.390752] ACPI: SSDT 00000000bae8fa98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.391161] ACPI: Dynamic OEM Table Load:
[ 0.391163] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.391295] ACPI: SSDT 00000000bae8dd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.391672] ACPI: Dynamic OEM Table Load:
[ 0.391674] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.394703] ACPI: Interpreter enabled
[ 0.394707] ACPI: (supports S0 S3 S4 S5)
[ 0.394729] ACPI: Using IOAPIC for interrupt routing
[ 0.399472] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.399631] ACPI: No dock devices found.
[ 0.399634] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.399955] \_SB_.PCI0:_OSC invalid UUID
[ 0.399956] _OSC request data:1 8 1f
[ 0.399960] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.400463] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.400465] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.400467] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.400470] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff]
[ 0.400499] PCI host bridge to bus 0000:00
[ 0.400501] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.400503] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.400504] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.400506] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.400514] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.400553] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.400586] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.400607] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.400618] pci 0000:00:02.0: reg 10: [mem 0xf1400000-0xf17fffff 64bit]
[ 0.400625] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.400631] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.400688] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.400712] pci 0000:00:14.0: reg 10: [mem 0xf1a00000-0xf1a0ffff 64bit]
[ 0.400788] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.400813] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.400835] pci 0000:00:16.0: reg 10: [mem 0xf1a15000-0xf1a1500f 64bit]
[ 0.400904] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.400941] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.400963] pci 0000:00:1a.0: reg 10: [mem 0xf1a1a000-0xf1a1a3ff]
[ 0.401059] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.401089] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.401105] pci 0000:00:1b.0: reg 10: [mem 0xf1a10000-0xf1a13fff 64bit]
[ 0.401178] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.401208] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.401338] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.401377] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.401462] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.401500] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.401523] pci 0000:00:1d.0: reg 10: [mem 0xf1a19000-0xf1a193ff]
[ 0.401619] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.401647] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.401780] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.401801] pci 0000:00:1f.2: reg 10: [io 0x4098-0x409f]
[ 0.401810] pci 0000:00:1f.2: reg 14: [io 0x40bc-0x40bf]
[ 0.401819] pci 0000:00:1f.2: reg 18: [io 0x4090-0x4097]
[ 0.401828] pci 0000:00:1f.2: reg 1c: [io 0x40b8-0x40bb]
[ 0.401836] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.401845] pci 0000:00:1f.2: reg 24: [mem 0xf1a18000-0xf1a187ff]
[ 0.401894] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.401915] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.401932] pci 0000:00:1f.3: reg 10: [mem 0xf1a14000-0xf1a140ff 64bit]
[ 0.401955] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.402021] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
[ 0.402029] pci 0000:01:00.0: reg 10: [mem 0xf0000000-0xf0ffffff]
[ 0.402037] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.402045] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.402051] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
[ 0.402057] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.408664] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.408668] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.408673] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.408679] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.408829] pci 0000:02:00.0: [8086:0887] type 00 class 0x028000
[ 0.408878] pci 0000:02:00.0: reg 10: [mem 0xf1900000-0xf1901fff 64bit]
[ 0.409114] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.415393] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.415401] pci 0000:00:1c.0: bridge window [mem 0xf1900000-0xf19fffff]
[ 0.415477] pci 0000:03:00.0: [1969:1091] type 00 class 0x020000
[ 0.415507] pci 0000:03:00.0: reg 10: [mem 0xf1800000-0xf183ffff 64bit]
[ 0.415522] pci 0000:03:00.0: reg 18: [io 0x2000-0x207f]
[ 0.415656] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.421985] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.421992] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.421999] pci 0000:00:1c.4: bridge window [mem 0xf1800000-0xf18fffff]
[ 0.422039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.422128] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.422157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.422191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.422264] \_SB_.PCI0:_OSC invalid UUID
[ 0.422265] _OSC request data:1 1f 1f
[ 0.422269] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.422308] \_SB_.PCI0:_OSC invalid UUID
[ 0.422309] _OSC request data:1 0 1d
[ 0.422312] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.422313] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.424783] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.424828] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.424869] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.424909] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.424949] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.424990] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.425029] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.425070] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.425144] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.425150] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.425152] vgaarb: loaded
[ 0.425153] vgaarb: bridge control possible 0000:01:00.0
[ 0.425154] vgaarb: no bridge control possible 0000:00:02.0
[ 0.425181] PCI: Using ACPI for IRQ routing
[ 0.426847] PCI: pci_cache_line_size set to 64 bytes
[ 0.426965] e820: reserve RAM buffer [mem 0x00091c00-0x0009ffff]
[ 0.426967] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.426968] e820: reserve RAM buffer [mem 0xa9b08000-0xabffffff]
[ 0.426969] e820: reserve RAM buffer [mem 0xb8bbd000-0xbbffffff]
[ 0.426971] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.426972] e820: reserve RAM buffer [mem 0x1bf600000-0x1bfffffff]
[ 0.427052] NetLabel: Initializing
[ 0.427053] NetLabel: domain hash size = 128
[ 0.427054] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.427065] NetLabel: unlabeled traffic allowed by default
[ 0.427081] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.427086] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.429098] Switching to clocksource hpet
[ 0.433798] pnp: PnP ACPI init
[ 0.433809] ACPI: bus type pnp registered
[ 0.434098] pnp 00:00: [bus 00-3e]
[ 0.434100] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.434102] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.434104] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.434106] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.434108] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.434109] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.434111] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.434112] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.434114] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.434115] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.434117] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.434119] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.434120] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.434122] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.434123] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.434125] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.434126] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.434128] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
[ 0.434131] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 0.434171] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.434183] pnp 00:01: [io 0x0000-0x001f]
[ 0.434185] pnp 00:01: [io 0x0081-0x0091]
[ 0.434186] pnp 00:01: [io 0x0093-0x009f]
[ 0.434187] pnp 00:01: [io 0x00c0-0x00df]
[ 0.434189] pnp 00:01: [dma 4]
[ 0.434208] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.434277] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.434297] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.434305] pnp 00:03: [io 0x00f0]
[ 0.434313] pnp 00:03: [irq 13]
[ 0.434331] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.434340] pnp 00:04: [io 0x002e-0x002f]
[ 0.434342] pnp 00:04: [io 0x004e-0x004f]
[ 0.434343] pnp 00:04: [io 0x0061]
[ 0.434345] pnp 00:04: [io 0x0063]
[ 0.434346] pnp 00:04: [io 0x0065]
[ 0.434347] pnp 00:04: [io 0x0067]
[ 0.434348] pnp 00:04: [io 0x0068]
[ 0.434350] pnp 00:04: [io 0x006c]
[ 0.434351] pnp 00:04: [io 0x0070]
[ 0.434352] pnp 00:04: [io 0x0080]
[ 0.434354] pnp 00:04: [io 0x0092]
[ 0.434355] pnp 00:04: [io 0x00b2-0x00b3]
[ 0.434357] pnp 00:04: [io 0x0680-0x069f]
[ 0.434358] pnp 00:04: [io 0x1000-0x1003]
[ 0.434360] pnp 00:04: [io 0x1004-0x1013]
[ 0.434361] pnp 00:04: [io 0xffff]
[ 0.434362] pnp 00:04: [io 0x0400-0x0453]
[ 0.434364] pnp 00:04: [io 0x0458-0x047f]
[ 0.434365] pnp 00:04: [io 0x0500-0x057f]
[ 0.434367] pnp 00:04: [io 0x164e-0x164f]
[ 0.434401] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.434403] system 00:04: [io 0x1000-0x1003] has been reserved
[ 0.434405] system 00:04: [io 0x1004-0x1013] has been reserved
[ 0.434407] system 00:04: [io 0xffff] has been reserved
[ 0.434408] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.434412] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.434413] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.434415] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.434418] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.434424] pnp 00:05: [io 0x0070-0x0077]
[ 0.434429] pnp 00:05: [irq 8]
[ 0.434447] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.434469] pnp 00:06: [io 0x0454-0x0457]
[ 0.434498] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.434500] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.434518] pnp 00:07: [io 0x0060]
[ 0.434519] pnp 00:07: [io 0x0064]
[ 0.434524] pnp 00:07: [irq 1]
[ 0.434542] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.434556] pnp 00:08: [irq 12]
[ 0.434577] pnp 00:08: Plug and Play ACPI device, IDs DLL0563 PNP0f13 (active)
[ 0.434663] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 0.434665] pnp 00:09: [mem 0xfed10000-0xfed17fff]
[ 0.434666] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 0.434668] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 0.434669] pnp 00:09: [mem 0xf8000000-0xfbffffff]
[ 0.434671] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 0.434674] pnp 00:09: [mem 0xfed90000-0xfed93fff]
[ 0.434675] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 0.434677] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 0.434678] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 0.434680] pnp 00:09: [mem 0xfffff000-0xffffffff]
[ 0.434692] pnp 00:09: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[ 0.434716] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.434718] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.434720] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.434724] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.434726] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.434728] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.434729] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.434731] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.434733] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.434735] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.434738] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.434873] pnp 00:0a: [irq 20]
[ 0.434908] pnp 00:0a: Plug and Play ACPI device, IDs SMO8810 (active)
[ 0.435037] pnp: PnP ACPI: found 11 devices
[ 0.435038] ACPI: ACPI bus type pnp unregistered
[ 0.441308] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.441343] pci 0000:01:00.0: BAR 6: assigned [mem 0xf1000000-0xf107ffff pref]
[ 0.441346] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.441348] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.441351] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf10fffff]
[ 0.441354] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.441357] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.441365] pci 0000:00:1c.0: bridge window [mem 0xf1900000-0xf19fffff]
[ 0.441376] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.441380] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.441385] pci 0000:00:1c.4: bridge window [mem 0xf1800000-0xf18fffff]
[ 0.441416] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.441417] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.441419] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.441421] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.441423] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.441424] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf10fffff]
[ 0.441426] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.441428] pci_bus 0000:02: resource 1 [mem 0xf1900000-0xf19fffff]
[ 0.441430] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.441431] pci_bus 0000:03: resource 1 [mem 0xf1800000-0xf18fffff]
[ 0.441455] NET: Registered protocol family 2
[ 0.441606] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.442253] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.443404] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.443530] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.443532] TCP: reno registered
[ 0.443545] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.443573] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.443649] NET: Registered protocol family 1
[ 0.443665] pci 0000:00:02.0: Boot video device
[ 0.443857] PCI: CLS 64 bytes, default 64
[ 0.443898] Unpacking initramfs...
[ 0.524594] Freeing initrd memory: 4272k freed
[ 0.525006] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.525009] software IO TLB [mem 0xb4bb5000-0xb8bb4fff] (64MB) mapped at [ffff8800b4bb5000-ffff8800b8bb4fff]
[ 0.525035] Simple Boot Flag at 0x66 set to 0x1
[ 0.525591] audit: initializing netlink socket (disabled)
[ 0.525605] type=2000 audit(1346890587.416:1): initialized
[ 0.537548] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.539121] VFS: Disk quotas dquot_6.5.2
[ 0.539160] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.539239] msgmni has been set to 11681
[ 0.539402] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.539428] io scheduler noop registered
[ 0.539429] io scheduler deadline registered
[ 0.539472] io scheduler cfq registered (default)
[ 0.539562] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.539781] intel_idle: does not run on family 6 model 58
[ 0.539802] GHES: HEST is not enabled!
[ 0.539845] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.540251] Linux agpgart interface v0.103
[ 0.540326] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.543170] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.543180] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.543280] mousedev: PS/2 mouse device common for all mice
[ 0.543339] rtc_cmos 00:05: RTC can wake from S4
[ 0.543469] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.543497] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.543504] cpuidle: using governor ladder
[ 0.543505] cpuidle: using governor menu
[ 0.543615] drop_monitor: Initializing network drop monitor service
[ 0.543681] TCP: cubic registered
[ 0.543775] NET: Registered protocol family 10
[ 0.543922] NET: Registered protocol family 17
[ 0.543929] Key type dns_resolver registered
[ 0.544034] PM: Hibernation image not present or could not be loaded.
[ 0.544041] registered taskstats version 1
[ 0.544624] rtc_cmos 00:05: setting system clock to 2012-09-06 00:16:27 UTC (1346890587)
[ 0.545879] Freeing unused kernel memory: 756k freed
[ 0.545973] Write protecting the kernel read-only data: 8192k
[ 0.549070] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.550319] Freeing unused kernel memory: 1496k freed
[ 0.552089] Freeing unused kernel memory: 616k freed
[ 0.558894] systemd-udevd[65]: starting version 189
[ 0.582757] ACPI: bus type usb registered
[ 0.582800] usbcore: registered new interface driver usbfs
[ 0.582936] usbcore: registered new interface driver hub
[ 0.582976] usbcore: registered new device driver usb
[ 0.583958] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.583964] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.583974] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.584030] SCSI subsystem initialized
[ 0.584086] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.584107] xhci_hcd 0000:00:14.0: irq 21, io mem 0xf1a00000
[ 0.584174] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 0.584419] xHCI xhci_add_endpoint called for root hub
[ 0.584420] xHCI xhci_check_bandwidth called for root hub
[ 0.584494] hub 1-0:1.0: USB hub found
[ 0.584502] hub 1-0:1.0: 4 ports detected
[ 0.584759] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.584766] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.584992] xHCI xhci_add_endpoint called for root hub
[ 0.584995] xHCI xhci_check_bandwidth called for root hub
[ 0.585094] hub 2-0:1.0: USB hub found
[ 0.585104] hub 2-0:1.0: 4 ports detected
[ 0.585499] libata version 3.00 loaded.
[ 0.588991] ahci 0000:00:1f.2: version 3.0
[ 0.589075] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 0.589349] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.602251] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xb impl RAID mode
[ 0.602269] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.602274] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.616023] scsi0 : ahci
[ 0.616092] scsi1 : ahci
[ 0.616153] scsi2 : ahci
[ 0.616214] scsi3 : ahci
[ 0.616273] scsi4 : ahci
[ 0.616332] scsi5 : ahci
[ 0.616538] ata1: SATA max UDMA/133 abar m2048@0xf1a18000 port 0xf1a18100 irq 42
[ 0.616542] ata2: SATA max UDMA/133 abar m2048@0xf1a18000 port 0xf1a18180 irq 42
[ 0.616543] ata3: DUMMY
[ 0.616546] ata4: SATA max UDMA/133 abar m2048@0xf1a18000 port 0xf1a18280 irq 42
[ 0.616547] ata5: DUMMY
[ 0.616548] ata6: DUMMY
[ 0.616617] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.616622] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 0.616643] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.616682] ehci_hcd 0000:00:1a.0: debug port 2
[ 0.620565] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 0.620581] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf1a1a000
[ 0.628855] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.629004] hub 3-0:1.0: USB hub found
[ 0.629007] hub 3-0:1.0: 2 ports detected
[ 0.629119] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.629123] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 0.629131] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.629158] ehci_hcd 0000:00:1d.0: debug port 2
[ 0.633029] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 0.633043] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1a19000
[ 0.642172] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.642305] hub 4-0:1.0: USB hub found
[ 0.642308] hub 4-0:1.0: 2 ports detected
[ 0.935078] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.935120] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.935143] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.935643] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 0.935747] ata2.00: ATA-8: SAMSUNG SSD PM830 mSATA 32GB, CXM12D1Q, max UDMA/133
[ 0.935750] ata2.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.936071] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 0.936178] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 0.936194] ata2.00: configured for UDMA/133
[ 0.936410] ata1.00: ATA-8: ST9500423AS, 0005DEM1, max UDMA/133
[ 0.936413] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 0.936930] ata4.00: ATAPI: Optiarc DVD+/-RW AD-7760H, 100A, max UDMA/100
[ 0.937576] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 0.937816] ata1.00: configured for UDMA/133
[ 0.937948] scsi 0:0:0:0: Direct-Access ATA ST9500423AS 0005 PQ: 0 ANSI: 5
[ 0.938109] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD PM83 CXM1 PQ: 0 ANSI: 5
[ 0.938398] usb 3-1: new high-speed USB device number 2 using ehci_hcd
[ 0.939037] ata4.00: configured for UDMA/100
[ 0.939846] scsi 3:0:0:0: CD-ROM Optiarc DVD+-RW AD-7760H 100A PQ: 0 ANSI: 5
[ 0.943656] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.943660] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.943681] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 0.943714] sd 0:0:0:0: [sda] Write Protect is off
[ 0.943718] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.943724] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.943727] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.943741] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.943747] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.944509] sdb: sdb1 sdb2
[ 0.945572] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 0.946927] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.946931] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.947081] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 0.963889] sda: sda1 sda2 sda3
[ 0.964204] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.062133] hub 3-1:1.0: USB hub found
[ 1.062211] hub 3-1:1.0: 6 ports detected
[ 1.168051] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 1.213226] device-mapper: uevent: version 1.0.3
[ 1.213424] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[ 1.276450] PM: Marking nosave pages: [mem 0x00091000-0x000fffff]
[ 1.276454] PM: Marking nosave pages: [mem 0x20000000-0x201fffff]
[ 1.276463] PM: Marking nosave pages: [mem 0x40004000-0x40004fff]
[ 1.276464] PM: Marking nosave pages: [mem 0xa9b08000-0xa9d09fff]
[ 1.276472] PM: Marking nosave pages: [mem 0xb8bbd000-0xbaffefff]
[ 1.276610] PM: Marking nosave pages: [mem 0xbb000000-0xffffffff]
[ 1.277660] PM: Basic memory bitmaps created
[ 1.291821] hub 4-1:1.0: USB hub found
[ 1.291868] hub 4-1:1.0: 8 ports detected
[ 1.304019] PM: Basic memory bitmaps freed
[ 1.339957] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.357933] usb 3-1.1: new full-speed USB device number 3 using ehci_hcd
[ 1.391312] systemd[1]: systemd 189 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 1.401880] systemd[1]: Inserted module 'autofs4'
[ 1.402170] systemd[1]: Set hostname to <terpsichore>.
[ 1.471937] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 1.472129] systemd[1]: Socket service syslog.service not loaded, refusing.
[ 1.507714] usb 3-1.3: new high-speed USB device number 4 using ehci_hcd
[ 1.508313] EXT4-fs (sdb2): re-mounted. Opts: data=ordered
[ 1.524185] Refined TSC clocksource calibration: 2095.240 MHz.
[ 1.524191] Switching to clocksource tsc
[ 1.604180] systemd-udevd[163]: starting version 189
[ 1.655435] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 1.657449] usb 3-1.5: new high-speed USB device number 5 using ehci_hcd
[ 1.658975] scsi6 : SCSI emulation for RTS5139 USB card reader
[ 1.659116] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 1.660458] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 1.660939] systemd-journald[190]: Successfully opened /dev/kmsg for logging.
[ 1.661078] usbcore: registered new interface driver rts5139
[ 1.661706] systemd-journald[190]: Fixed max_use=292.1M max_size=36.5M min_size=64.0K keep_free=146.0M
[ 1.661743] systemd-journald[190]: Reserving 66488 entries in hash table.
[ 1.662504] systemd-journald[190]: Vacuuming...
[ 1.662528] systemd-journald[190]: Flushing /dev/kmsg...
[ 1.683693] systemd-journald[190]: systemd-journald running as pid 190
[ 1.764293] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.764298] ACPI: Power Button [PWRB]
[ 1.764340] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.764343] ACPI: Sleep Button [SLPB]
[ 1.764383] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 1.764726] ACPI: Lid Switch [LID0]
[ 1.764772] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.764775] ACPI: Power Button [PWRF]
[ 1.765220] ACPI: Requesting acpi_cpufreq
[ 1.770962] Monitor-Mwait will be used to enter C-1 state
[ 1.770993] Monitor-Mwait will be used to enter C-2 state
[ 1.771014] Monitor-Mwait will be used to enter C-3 state
[ 1.771030] ACPI: acpi_idle registered with cpuidle
[ 1.800860] mei 0000:00:16.0: setting latency timer to 64
[ 1.800980] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[ 1.802850] mei 0000:00:16.0: wd: failed to find the client
[ 1.807828] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.807831] ACPI: Thermal Zone [TZ00] (59 C)
[ 1.808737] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.808742] ACPI: Thermal Zone [TZ01] (59 C)
[ 1.815513] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 1.815623] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 1.815628] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.854381] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 1.876263] Linux media interface: v0.10
[ 1.890511] usb 4-1.5: new full-speed USB device number 3 using ehci_hcd
[ 1.933059] Adding 1048572k swap on /dev/sdb1. Priority:1 extents:1 across:1048572k SS
[ 1.970336] ACPI: AC Adapter [ADP0] (off-line)
[ 1.987531] Bluetooth: Core ver 2.16
[ 1.987554] NET: Registered protocol family 31
[ 1.987557] Bluetooth: HCI device and connection manager initialized
[ 1.987560] Bluetooth: HCI socket layer initialized
[ 1.987562] Bluetooth: L2CAP socket layer initialized
[ 1.987567] Bluetooth: SCO socket layer initialized
[ 1.991833] usbcore: registered new interface driver btusb
[ 2.014246] ACPI: Battery Slot [BAT0] (battery present)
[ 2.015220] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 2.015226] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.015230] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 2.015234] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120320/utaddress-251)
[ 2.015237] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.015238] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.017332] Linux video capture interface: v2.00
[ 2.018232] cfg80211: Calling CRDA to update world regulatory domain
[ 2.020368] wmi: Mapper loaded
[ 2.020751] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 2.020817] Registered led device: dell-laptop::touchpad
[ 2.020838] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.021917] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 2.022214] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 2.022234] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 2.024342] [drm] Initialized drm 1.1.0 20060810
[ 2.025546] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_E4HD (0c45:648b)
[ 2.030462] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 2.035233] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 2.035235] iwlwifi: Copyright(c) 2003-2012 Intel Corporation
[ 2.035339] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[ 2.035340] iwlwifi 0000:02:00.0: pci_resource_base = ffffc900057b4000
[ 2.035341] iwlwifi 0000:02:00.0: HW Revision ID = 0xC4
[ 2.035459] iwlwifi 0000:02:00.0: irq 45 for MSI/MSI-X
[ 2.052021] input: Laptop_Integrated_Webcam_E4HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input6
[ 2.052208] usbcore: registered new interface driver uvcvideo
[ 2.052210] USB Video Class driver (1.1.1)
[ 2.068428] Adding 6291452k swap on /dev/sda2. Priority:2 extents:1 across:6291452k
[ 2.123628] iTCO_vendor_support: vendor-support=0
[ 2.125069] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.125159] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.125414] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.131861] input: Dell WMI hotkeys as /devices/virtual/input/input7
[ 2.131905] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[ 2.137598] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[ 2.138487] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[ 2.139457] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x12
[ 2.139824] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1
[ 2.140145] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 2.140146] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 2.140147] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 2.140148] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
[ 2.140150] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_P2P disabled
[ 2.140151] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 2.140246] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 2.140326] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x12
[ 2.140899] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x12
[ 2.141396] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x12
[ 2.142169] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 2.156973] iwlwifi 0000:02:00.0: device EEPROM VER=0x81c, CALIB=0x6
[ 2.156977] iwlwifi 0000:02:00.0: Device SKU: 0x150
[ 2.156981] iwlwifi 0000:02:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
[ 2.157005] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 2.157164] Registered led device: phy0-led
[ 2.160206] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.534478] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.541531] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
[ 2.563251] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.569980] hda_codec: CX20590: BIOS auto-probing.
[ 2.570943] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 2.579426] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.579647] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.579835] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.581548] i915 0000:00:02.0: setting latency timer to 64
[ 2.618193] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 2.618199] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.618200] [drm] Driver supports precise vblank timestamp query.
[ 2.618842] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.618843] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 2.738846] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 2.746529] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[ 2.789721] systemd-journald[190]: Received SIGUSR1
[ 3.009264] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 3.017266] iwlwifi 0000:02:00.0: Radio type=0x2-0x0-0x0
[ 3.099078] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.175354] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 3.238677] EXT4-fs (sdb2): re-mounted. Opts: data=ordered,commit=600
[ 3.321400] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=600
[ 3.328566] fbcon: inteldrmfb (fb0) is primary device
[ 3.328614] ata1: hard resetting link
[ 3.347779] EXT4-fs (dm-0): re-mounted. Opts: data=ordered,commit=600
[ 3.540518] Console: switching to colour frame buffer device 170x48
[ 3.546303] fb0: inteldrmfb frame buffer device
[ 3.546304] drm: registered panic notifier
[ 3.546637] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20120320/video-1149)
[ 3.546647] video: probe of LNXVIDEO:00 failed with error 5
[ 3.548193] acpi device:35: registered as cooling_device8
[ 3.548431] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.548633] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 3.548880] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.647764] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.649009] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.650611] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3.650834] ata1.00: configured for UDMA/133
[ 3.651101] ata1: EH complete
[ 3.651412] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.688734] ata2: hard resetting link
[ 4.007240] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.008028] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 4.008723] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 4.008889] ata2.00: configured for UDMA/133
[ 4.008996] ata2: EH complete
[ 4.009201] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 23.639935] wlan0: authenticate with e0:5f:b9:36:70:c0
[ 23.651690] wlan0: send auth to e0:5f:b9:36:70:c0 (try 1/3)
[ 23.654492] wlan0: authenticated
[ 23.657882] wlan0: associate with e0:5f:b9:36:70:c0 (try 1/3)
[ 23.660558] wlan0: RX AssocResp from e0:5f:b9:36:70:c0 (capab=0x431 status=0 aid=4)
[ 23.663848] wlan0: associated
[ 23.665104] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1015.614597] ACPI Warning: _BQC returned an invalid level (20120320/video-472)
Some devices reported in powertop, that I do not know what are doing:
The battery reports a discharge rate of 18.8 W
Usage Device name
32.2 ops/s GPU
4.8% CPU use
100.0% Radio device: btusb
100.0% Radio device: iwlwifi
205.7 pkts/s Network interface: wlan0 (iwlwifi)
9.8% Display backlight
100.0% Audio codec hwC0D3: Intel
100.0% Audio codec hwC0D0: Conexant
0.0% USB device: usb-device-8087-0024
0.0% USB device: EHCI Host Controller
0.0% USB device: Laptop_Integrated_Webcam_E4HD (CNFB183F3040100006Y2)
0.0% USB device: usb-device-8087-07da
0.0% Display backlight
100.0% PCI Device: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5
100.0% PCI Device: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port
100.0% PCI Device: Intel Corporation 3rd Gen Core processor DRAM Controller
100.0% PCI Device: Intel Corporation 3rd Gen Core processor Graphics Controller
100.0% USB device: EHCI Host Controller
100.0% USB device: usb-device-8087-0024
100.0% USB device: USB2.0-CRW (Generic)
100.0% PCI Device: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1
100.0% PCI Device: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2
100.0% PCI Device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller
100.0% PCI Device: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1
100.0% PCI Device: Intel Corporation HM77 Express Chipset LPC Controller
100.0% PCI Device: Intel Corporation 82801 Mobile SATA Controller [RAID mode]
100.0% PCI Device: Intel Corporation Centrino Wireless-N 2230
0.0% PCI Device: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller
0.0% USB device: xHCI Host Controller
0.0% USB device: xHCI Host Controller
0.0% PCI Device: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1
0.0% USB device: usb-device-138a-0011
Have played with laptop-mode, here is my config
egrep -v '^#|^$' laptop-mode.conf conf.d/*
laptop-mode.conf:ENABLE_LAPTOP_MODE_TOOLS=1
laptop-mode.conf:VERBOSE_OUTPUT=0
laptop-mode.conf:LOG_TO_SYSLOG=1
laptop-mode.conf:DEBUG=0
laptop-mode.conf:ENABLE_LAPTOP_MODE_ON_BATTERY=1
laptop-mode.conf:ENABLE_LAPTOP_MODE_ON_AC=0
laptop-mode.conf:ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED=0
laptop-mode.conf:ENABLE_AUTO_MODULES=1
laptop-mode.conf:MINIMUM_BATTERY_CHARGE_PERCENT=3
laptop-mode.conf:DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL=1
laptop-mode.conf:HD="/dev/[hs]d[abcdefgh]"
laptop-mode.conf:PARTITIONS="auto /dev/mapper/*"
laptop-mode.conf:ASSUME_SCSI_IS_SATA=1
laptop-mode.conf:LM_BATT_MAX_LOST_WORK_SECONDS=600
laptop-mode.conf:LM_AC_MAX_LOST_WORK_SECONDS=600
laptop-mode.conf:CONTROL_READAHEAD=1
laptop-mode.conf:LM_READAHEAD=3072
laptop-mode.conf:NOLM_READAHEAD=768
laptop-mode.conf:CONTROL_NOATIME=1
laptop-mode.conf:USE_RELATIME=0
laptop-mode.conf:CONTROL_HD_IDLE_TIMEOUT=1
laptop-mode.conf:LM_AC_HD_IDLE_TIMEOUT_SECONDS=20
laptop-mode.conf:LM_BATT_HD_IDLE_TIMEOUT_SECONDS=20
laptop-mode.conf:NOLM_HD_IDLE_TIMEOUT_SECONDS=80
laptop-mode.conf:CONTROL_HD_POWERMGMT="auto"
laptop-mode.conf:BATT_HD_POWERMGMT=1
laptop-mode.conf:LM_AC_HD_POWERMGMT=1
laptop-mode.conf:NOLM_AC_HD_POWERMGMT=254
laptop-mode.conf:CONTROL_HD_WRITECACHE=1
laptop-mode.conf:NOLM_AC_HD_WRITECACHE=1
laptop-mode.conf:NOLM_BATT_HD_WRITECACHE=1
laptop-mode.conf:LM_HD_WRITECACHE=0
laptop-mode.conf:CONTROL_MOUNT_OPTIONS=1
laptop-mode.conf:LM_DIRTY_RATIO=60
laptop-mode.conf:NOLM_DIRTY_RATIO=15
laptop-mode.conf:LM_DIRTY_BACKGROUND_RATIO=1
laptop-mode.conf:NOLM_DIRTY_BACKGROUND_RATIO=4
laptop-mode.conf:DEF_UPDATE=5
laptop-mode.conf:DEF_XFS_AGE_BUFFER=15
laptop-mode.conf:DEF_XFS_SYNC_INTERVAL=30
laptop-mode.conf:DEF_XFS_BUFD_INTERVAL=1
laptop-mode.conf:DEF_MAX_AGE=30
laptop-mode.conf:XFS_HZ=100
laptop-mode.conf:LM_SECONDS_BEFORE_SYNC=2
conf.d/ac97-powersave.conf:CONTROL_AC97_POWER="auto"
conf.d/ac97-powersave.conf:DEBUG=0
conf.d/auto-hibernate.conf:DEBUG=0
conf.d/auto-hibernate.conf:ENABLE_AUTO_HIBERNATION=1
conf.d/auto-hibernate.conf:HIBERNATE_COMMAND=/usr/sbin/s2disk
conf.d/auto-hibernate.conf:AUTO_HIBERNATION_BATTERY_CHARGE_PERCENT=1
conf.d/auto-hibernate.conf:AUTO_HIBERNATION_ON_CRITICAL_BATTERY_LEVEL=1
conf.d/battery-level-polling.conf:DEBUG=0
conf.d/battery-level-polling.conf:ENABLE_BATTERY_LEVEL_POLLING=0
conf.d/battery-level-polling.conf:BLACKLIST_IN_FLOCK=1
conf.d/bluetooth.conf:DEBUG=0
conf.d/bluetooth.conf:CONTROL_BLUETOOTH=1
conf.d/bluetooth.conf:BATT_ENABLE_BLUETOOTH=0
conf.d/bluetooth.conf:AC_ENABLE_BLUETOOTH=1
conf.d/bluetooth.conf:BLUETOOTH_INTERFACES="hci0"
conf.d/configuration-file-control.conf:DEBUG=0
conf.d/configuration-file-control.conf:CONTROL_CONFIG_FILES=0
conf.d/configuration-file-control.conf:CONFIG_FILES="/etc/syslog.conf /etc/syslog-ng/syslog-ng.conf /etc/rsyslog.conf"
conf.d/configuration-file-control.conf:CONFIG_FILE_SIGNAL_PROGRAMS="syslogd syslog-ng rsyslogd"
conf.d/configuration-file-control.conf:CONFIG_FILE_RELOAD_SERVICES=""
conf.d/cpufreq.conf:DEBUG=0
conf.d/cpufreq.conf:CONTROL_CPU_FREQUENCY="auto"
conf.d/cpufreq.conf:BATT_CPU_MAXFREQ=slowest
conf.d/cpufreq.conf:BATT_CPU_MINFREQ=slowest
conf.d/cpufreq.conf:BATT_CPU_GOVERNOR=conservative
conf.d/cpufreq.conf:BATT_CPU_IGNORE_NICE_LOAD=1
conf.d/cpufreq.conf:LM_AC_CPU_MAXFREQ=slowest
conf.d/cpufreq.conf:LM_AC_CPU_MINFREQ=slowest
conf.d/cpufreq.conf:LM_AC_CPU_GOVERNOR=conservative
conf.d/cpufreq.conf:LM_AC_CPU_IGNORE_NICE_LOAD=1
conf.d/cpufreq.conf:NOLM_AC_CPU_MAXFREQ=fastest
conf.d/cpufreq.conf:NOLM_AC_CPU_MINFREQ=slowest
conf.d/cpufreq.conf:NOLM_AC_CPU_GOVERNOR=performance
conf.d/cpufreq.conf:NOLM_AC_CPU_IGNORE_NICE_LOAD=0
conf.d/cpufreq.conf:CONTROL_CPU_THROTTLING=0
conf.d/cpufreq.conf:BATT_CPU_THROTTLING=maximum
conf.d/cpufreq.conf:LM_AC_CPU_THROTTLING=maximum
conf.d/cpufreq.conf:NOLM_AC_CPU_THROTTLING=minimum
conf.d/dpms-standby.conf:DEBUG=0
conf.d/dpms-standby.conf:CONTROL_DPMS_STANDBY="auto"
conf.d/dpms-standby.conf:BATT_DPMS_STANDBY=300
conf.d/dpms-standby.conf:LM_AC_DPMS_STANDBY=300
conf.d/dpms-standby.conf:NOLM_AC_DPMS_STANDBY=1200
conf.d/eee-superhe.conf:DEBUG=0
conf.d/eee-superhe.conf:CONTROL_SUPERHE="auto"
conf.d/eee-superhe.conf:
conf.d/eee-superhe.conf:BATT_SUPERHE=2
conf.d/eee-superhe.conf:LM_AC_SUPERHE=2
conf.d/eee-superhe.conf:NOLM_AC_SUPERHE=0
conf.d/ethernet.conf:DEBUG=0
conf.d/ethernet.conf:CONTROL_ETHERNET="auto"
conf.d/ethernet.conf:BATT_THROTTLE_ETHERNET=1
conf.d/ethernet.conf:LM_AC_THROTTLE_ETHERNET=1
conf.d/ethernet.conf:NOLM_AC_THROTTLE_ETHERNET=0
conf.d/ethernet.conf:THROTTLE_SPEED="slowest"
conf.d/ethernet.conf:DISABLE_WAKEUP_ON_LAN=1
conf.d/ethernet.conf:ETHERNET_DEVICES="eth0"
conf.d/ethernet.conf:DISABLE_ETHERNET_ON_BATTERY=0
conf.d/exec-commands.conf:CONTROL_EXEC_COMMANDS="auto"
conf.d/exec-commands.conf:DEBUG=0
conf.d/exec-commands.conf:BATT_EXEC_COMMAND_0="" # Enable power saving feature 0 here
conf.d/exec-commands.conf:LM_AC_EXEC_COMMAND_0="" # Enable power saving feature 0 here
conf.d/exec-commands.conf:NOLM_AC_EXEC_COMMAND_0="" # Disable power saving feature 0 here
conf.d/exec-commands.conf:BATT_EXEC_COMMAND_1="" # Enable power saving feature 1 here
conf.d/exec-commands.conf:LM_AC_EXEC_COMMAND_1="" # Enable power saving feature 1 here
conf.d/exec-commands.conf:NOLM_AC_EXEC_COMMAND_1="" # Disable power saving feature 1 here
conf.d/exec-commands.conf:BATT_EXEC_COMMAND_2="" # Enable power saving feature 2 here
conf.d/exec-commands.conf:LM_AC_EXEC_COMMAND_2="" # Enable power saving feature 2 here
conf.d/exec-commands.conf:NOLM_AC_EXEC_COMMAND_2="" # Disable power saving feature 2 here
conf.d/exec-commands.conf:BATT_EXEC_COMMAND_3="" # Enable power saving feature 3 here
conf.d/exec-commands.conf:LM_AC_EXEC_COMMAND_3="" # Enable power saving feature 3 here
conf.d/exec-commands.conf:NOLM_AC_EXEC_COMMAND_3="" # Disable power saving feature 3 here
conf.d/exec-commands.conf:BATT_EXEC_COMMAND_4="" # Enable power saving feature 4 here
conf.d/exec-commands.conf:LM_AC_EXEC_COMMAND_4="" # Enable power saving feature 4 here
conf.d/exec-commands.conf:NOLM_AC_EXEC_COMMAND_4="" # Disable power saving feature 4 here
conf.d/exec-commands.conf:BATT_EXEC_COMMAND_5="" # Enable power saving feature 5 here
conf.d/exec-commands.conf:LM_AC_EXEC_COMMAND_5="" # Enable power saving feature 5 here
conf.d/exec-commands.conf:NOLM_AC_EXEC_COMMAND_5="" # Disable power saving feature 5 here
conf.d/exec-commands.conf:BATT_EXEC_COMMAND_6="" # Enable power saving feature 6 here
conf.d/exec-commands.conf:LM_AC_EXEC_COMMAND_6="" # Enable power saving feature 6 here
conf.d/exec-

Answer 1

cfr wrote:
@lahwaacz,
Could you point me to documentation regarding bugs/problems with laptop-mode tools? I'm using that right now and it has always worked pretty well but I'm currently seeing higher temperatures (~10C higher on average) and trying to figure out why.
My fan operates continually but not, I think, very aggressively. But it has always done that so I assume it is normal for this laptop. (Have no idea really but it doesn't seem out of the way - it is a laptop, after all...)
I don't know anything about fan control, my laptop controls fan speed automatically, I can't even get current fan speed.
The main problem with laptop-mode-tools is that it's very huge, and the bigger the program is, the slower is the execution. Another problem is that it's connected to both battery and AC adapter ACPI events (see /etc/acpi/events/lm_{ac_adapter,battery}). On my laptop, those events are sent at the same time, resulting in running laptop-mode-tools twice. Most people once configure laptop-mode-tools to their liking and their hardware, so I think there is no need for such an extensive software like laptop-mode-tools, if something simpler does the same (or better) job.
Also laptop-mode-tools can conflict with pm-utils (which are installed on many systems as dependency for some packages):
https://wiki.archlinux.org/index.php/La … able_on_AC
https://bbs.archlinux.org/viewtopic.php?id=106989