Large file doesn't work in a message-splitting scenario

Hello,
I'm trying to measure the XI performance in a message-splitting scenario by having the file adapter to pull the xml file below and send it to XI to perform a simple "message split w/o BPM" and generate xml files for each record in another folder. I tried 100, 500, 1000 records and they all turned out fine. Once I tried the 2000-records case, the status of that message is WAITING in RWB and I checked sxmb_moni, the message is in "recorded for outbound messaging", I couldn't find any error.
Is there some kinda of threshold that can be adjusted for large files? Thank you.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MultiXML xmlns:ns0="urn:himax:b2bi:poc:multiMapTest">
 <Record>
 <ID>1</ID>
 <FirstName>1</FirstName>
 <LastName>1</LastName>
 </Record>
</ns0:MultiXML>

Hello,
The Queue ID is "XBTO1__0000". I double-clicked it, it took me to the "qRFC Monitor (Inbound Queue) screen, and showed a XBT01_0000 queue with 3 Entries.
I double-clicked on that, and it took me to another screen that showed a queue with same same and "Running" in Status.
I double-clicked on that, and i saw three entries. For the latest entry, its StatusText says "Transaction recorded".
I double-clicked on that, it took me to Function Builder:Display SXMS_ASYNC_EXEC.
What do I from here?

Similar Messages

Read From Binary File doesn´t work on MCB2400 in LV2009 Embedded ARM

Hello,
I try to read a Binary File from SD-Card on my MCB2400 Board with LV2009 Embedded for ARM.
But the output is always 0, if I use my VI on the MCB2400. If use the same VI on the PC it works fine with the same binary file.
The
access to the SD-Card on the MCB2400 works in other cases finde, if I
try to read from a text-file it works without any problems.
Are thre any constraints for the "Read From Binary File"-Node in Embedded in comparison to the same node on PC ?
I have noticed that there is also a problem
with the reading of textfiles. If the sice of the file is about 100Byte
it doesn´t work anymore, too. I can´t understand it, because I read
always just one Byte. And even if the implementation in Labview is so
bad that it allways reads the total file in the ram it sould work. The
MCB2400 has 32MegaByte RAM, so 100Byte or even a few MegaByte should
work.
But this doesn´t seem to be the Problem for the Binary-Problem. Because even a 50byte Binary-File doesn´t work.
bye & thanks
amin
Solved!
Go to Solution.
Attachments:
SD_Card_Read-test.vi ‏12 KB

Hello,
thank you for your Help.
But I just want to read a Binary File, which is build by another program. And this is coded with 8Bit (like a normal Binary File) and not just with 7Bit (ASCII). So the workaround doesn't work in my case.
I posted the Test-VI in my first post (here once again as picture). And it works fine on the PC, but if I try it on my MCB2400 the "Read Form Binary File" Node doesn't work.
And it is also possible to open the Bin file with the "Read Text File" Node and see the cryptic content of the Bin-File. So the Problem seems to be in the "Read Form Binary File" Node.
bye & thanks again
amin
Message Edited by aminat on 09-30-2009 03:28 AM

[svn] 3610: Fixing bug SDK-17173: Setting rotate to a large number doesn' t work anymore.

Revision: 3610
Author: [email protected]
Date: 2008-10-13 17:33:25 -0700 (Mon, 13 Oct 2008)
Log Message:
Fixing bug SDK-17173: Setting rotate to a large number doesn't work anymore.
The Flash Player clamps rotate between -180 and 180. We should do the same now that we're doing some of the calculations ourselves. This clamping logic was added to CompoundTransform.as. Also, clamping logic was added to UIComponent. This is because FP10 doesn't handle values greater than 2^15-1; FP 9 used to handle these values fine. I filed a FP bug for this (FP-749).
QE: Yes - Please look out for any rotation failures
Doc: No
Bugs: SDK-17173
Reviewer: Ely
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17173
http://bugs.adobe.com/jira/browse/FP-749
http://bugs.adobe.com/jira/browse/SDK-17173
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/geom/CompoundTransform.as

Can we now assume that the touch SDK has been abandonned by Adobe? It's now a year after "should be updated soon", and currently if you try to download the touch SDK from this page you get the Photoshop 3 SDK instead!!!
I ask as I'm about to remove Touch support from my app; the very few people that use touch are now having problems e.g., timeouts, with the latest version of Photoshop.
Sandy

Jar file doesn't work

I am quite new to java so I hope my question is not stupid.
I used bluej to realize an application.It works when executing the main method in bluej,but when I create the jar file,it simpy doesn't work.I have included the main class when creating the jar file.When double-clicking on the jar file, it makes the typical error sound of windows,but it doesn't show any message.
What is the problem?

Welcome to the Sun forums.
Subject: My Applet Jar file doesn't work !! .
1) Note that one '!' denotes exclamation, whereas 2 or more often denotes a dweeb.
2) Since you are on your first post, I will point out that applets are an advanced topic, and should not be attempted by newbies.
3) "doesn't work" is very vague. It is likely to produce a reply like "maybe the applet is lazy - try flogging it".
Amera wrote:
..I have written this java applet :When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the formatting and indentation of the sample. To use the code tags, select the sample and click the CODE button.
Also note that the most preferred form of code is an SSCCE *(<- link).* In an SSCCE, your would remove all but one button (if the actionPerformed fails with 6 or 7 buttons, trim it down to fail with just one or two.
i made a jar file :So does the applet work before you make the Jar file? Your post so far suggests the Jar file is the problem.
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!So you get 'no output in the console & no effect in the applet'?
What is the URL where I can see your applet failing?
As an aside, since Sun does not guarantee that applet clients will act on the showDocument command, even if it does not work, it would not be a 'bug'.
Edited by: AndrewThompson64 on Dec 28, 2009 11:18 AM

Am unable to install CS5 on mac running yosemite. Tried installing JavaFor OSX, it still doesn't work. Error message reads "inconsistency in the installer database"

Am unable to install CS5 on mac running yosemite. Tried installing JavaFor OSX, it still doesn't work. Error message reads "inconsistency in the installer database"

remove your caps database. this shows the location for cs3. make the obvious changes for cs5.
Error "...Installer Database is Corrupt..." when you install Adobe Creative Suite 3 products

JSP referencinc taglib.tld in JAR file doesn't work.

I have some custom tags which work fine under Weblogic 5.1 when I do a
 normal deployment of files, including the taglib.tld. However, when I
 try to reference the taglib.tld located in a JAR file, then weblogic
 throws an error saying that it cannot resolve into a valid tag library.
 I am only doing this because I am testing the same site agains both
 iPlanet Web Server and Weblogic. iPlanet will only find the taglib.tld
 when it is in a JAR file.
 Can anyone shed some light on referencing the taglib.tld in a JAR file.
 This should work, as it is covered in the JSP 1.1 specification.
 FYI - the jar file is in the same location as the JSP which references
 it. The URI to the JAR file (in the JSP) is from the root of the site.
 Thanks for any help.
 -Scott Edwards


Welcome to the Sun forums.
Subject: My Applet Jar file doesn't work !! .
1) Note that one '!' denotes exclamation, whereas 2 or more often denotes a dweeb.
2) Since you are on your first post, I will point out that applets are an advanced topic, and should not be attempted by newbies.
3) "doesn't work" is very vague. It is likely to produce a reply like "maybe the applet is lazy - try flogging it".
Amera wrote:
..I have written this java applet :When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the formatting and indentation of the sample. To use the code tags, select the sample and click the CODE button.
Also note that the most preferred form of code is an SSCCE *(<- link).* In an SSCCE, your would remove all but one button (if the actionPerformed fails with 6 or 7 buttons, trim it down to fail with just one or two.
i made a jar file :So does the applet work before you make the Jar file? Your post so far suggests the Jar file is the problem.
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!So you get 'no output in the console & no effect in the applet'?
What is the URL where I can see your applet failing?
As an aside, since Sun does not guarantee that applet clients will act on the showDocument command, even if it does not work, it would not be a 'bug'.
Edited by: AndrewThompson64 on Dec 28, 2009 11:18 AM

Examine and repair iphoto library files doesn't work?

examine and repair iphoto library files doesn't work?

As a Test:
In the Source account - create a new library and try share it instead.
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

My Applet Jar file doesn't work !!

hello ,
I have written this java applet :
import java.awt.*;
import javax.swing.*;
import java.applet.Applet;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.net.URL;
public class test4 extends Applet implements ActionListener{
 private static final long serialVersionUID = 1L;
 private JButton B1 =new JButton("Forward ");
 private JButton B2 =new JButton("Backward");
 private JButton B3 =new JButton("Left");
 private JButton B4 =new JButton("Right");
private JPanel P1 = new JPanel();
private JPanel P2 = new JPanel();
private JPanel P3 = new JPanel();
private JPanel P4 = new JPanel();
private JPanel P5 = new JPanel();
private JPanel P6 = new JPanel();
private JLabel L3 = new JLabel(" ");
private JLabel L4 = new JLabel(" ");
private JLabel L5 = new JLabel(" ");
private JLabel L6 = new JLabel(" ");
private JLabel L7 = new JLabel(" ");
JSplitPane sppSplitPane0 = new JSplitPane( );
 public test4()
 JFrame.setDefaultLookAndFeelDecorated(true);
 sppSplitPane0.setDividerLocation( 250 );
 P3.add(L4);
 P3.add(B1);
 P3.add(L5);
 P5.add(B3);
 P5.add(L3);
 P5.add(B4);
 P4.add(L6);
 P4.add(B2);
P4.add(L7);
 P1.setLayout(new BorderLayout());
 P1.add("North",P3);
 P1.add("Center",P5);
 P1.add("South",P4);
 P2.setLayout(new BorderLayout());
 P2.add("North" , P1);
 B1.addActionListener(this);
 B2.addActionListener(this);
 B3.addActionListener(this);
 B4.addActionListener(this);
 sppSplitPane0.setLeftComponent(P2);
 sppSplitPane0.setRightComponent(P6);
 public void actionPerformed(ActionEvent e) {
 try {
 if (e.getSource() == B4) {
 URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?R");
 System.out.println("URL = " + myNewURL);
 getAppletContext().showDocument(myNewURL,"blank");
 else
 if (e.getSource() == B3) {
 URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?L");
 System.out.println("URL = " + myNewURL);
 getAppletContext().showDocument(myNewURL,"blank");
 else
 if (e.getSource() == B2) {
 URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?B");
 System.out.println("URL = " + myNewURL);
 getAppletContext().showDocument(myNewURL,"blank");
 else {
 URL myNewURL = new URL("http://amera/cgi-bin/test.cgi?F");
 System.out.println("URL = " + myNewURL);
 getAppletContext().showDocument(myNewURL,"blank");
 } catch (Exception err) {
 System.err.println("Error!\n" + err);
 showStatus("Error, look in Java Console for details!");
 public static void main(String[] args) {
 test t=new test();
 JFrame frame =new JFrame();
 frame.add(t.sppSplitPane0);
 frame.setSize(1100,700);
 frame.setVisible(true);
i made a jar file :
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!
please help me .
Edited by: Amera on Dec 27, 2009 2:51 PM

Welcome to the Sun forums.
Subject: My Applet Jar file doesn't work !! .
1) Note that one '!' denotes exclamation, whereas 2 or more often denotes a dweeb.
2) Since you are on your first post, I will point out that applets are an advanced topic, and should not be attempted by newbies.
3) "doesn't work" is very vague. It is likely to produce a reply like "maybe the applet is lazy - try flogging it".
Amera wrote:
..I have written this java applet :When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags help retain the formatting and indentation of the sample. To use the code tags, select the sample and click the CODE button.
Also note that the most preferred form of code is an SSCCE *(<- link).* In an SSCCE, your would remove all but one button (if the actionPerformed fails with 6 or 7 buttons, trim it down to fail with just one or two.
i made a jar file :So does the applet work before you make the Jar file? Your post so far suggests the Jar file is the problem.
i created a file and named it MANIFEST.MF .i wrote inside it :
Main-Class: test
Then i placed it in a folder with the test.class .I created jar file using command line.
I entered the test.class path and then wrote this command :
jar cvfm myjar.jar MANIFEST.MF *.class
Then the jar file "myjar.jar" is created .
it's executed but this function "public void actionPerformed(ActionEvent e) " won't wrok.
i keep pressing the buttons but nothing is happening !!So you get 'no output in the console & no effect in the applet'?
What is the URL where I can see your applet failing?
As an aside, since Sun does not guarantee that applet clients will act on the showDocument command, even if it does not work, it would not be a 'bug'.
Edited by: AndrewThompson64 on Dec 28, 2009 11:18 AM

I have installed 0S5 but restoring the backup doesn't work. the following messages appear: An error accurred while restoring this iphone (-20) because the backup was corrupt or not compatible with iphone being restored (my iphone 3GS)

I have installed 0S5 but restoring the backup doesn't work. the following messages appears: An error accurred while restoring this iphone (-20), followed by another message: because the backup was corrupt or not compatible with iphone being restored (my iphone is 3GS), I tried restoring the factory settings and then restore the backup, but the same problems and I have lost all my contacts, pictures etc

Hi Ckuan,
Thanks a lot for your advice.
Deleting the correupted back up means to delete the information of one month since the last back up I made is one month ago.....right?
This back up I made right before I restored my iphone. During the restore however my OS was upgraded to 5.1.1. and reading the comments on the internet it seems I am not the only one whom experience this problem.
Can it be that if I downgrade my OS back to 5.1. the back up will not be considered as corrupted? If so, how do I downgrade the iphone?
Thanks in advance.

Save As... Duplicate lvproj file doesn't work correctly with lvlibs/lvclasses

I am trying to save a copy of a project with all dependencies so that I can sent a subset of our code to NI technical support for another issue. I have been unable to do this successfully and have isolated this to limitations of "Save As..." --> "Duplicate .lvproj file and contents (Include all dependencies)" when handling lvlibs and lvclasses. I am wondering if I am doing something wrong or if there is a workaround.
I am using LabView 8.6.1 under Windows. A sample project displaying this issue is attached. To repro the problem I am having,
Open library.lvproj. This is simple project with one library (SimpleLibrary.lvlib) and two VIs that are member of that library. (Add.vi and Subtract.vi).
File -> Save As... -> Duplicate .lvproj file and contents (Include all dependencies)
Pick a new location in your filesystem somewhere.
The save starts, then LabView puts up a dialog box "Cannot save library 'SimpleLibrary.lvlib'. Another library in memory is already loaded from that path." (Note that this is not true; the library is loaded from the original project path; nothing has as of yet been saved to the new project path.)
LabView it gives you a file dialog in the target location. If you click OK (opting to save it to the new location in the same relative path as in the original project), it returns to the "Cannot save library" dialog box. If you create a new folder (i.e. "New Folder") in the target and descend into the target, then the save is allowed, but when you re-open the project it looks for the library at the old location (relative to the new copy of the project), and it opens it as conflicted. The conflicts must be resolved manually.
The manual move-and-unconflict process is tolerable with a simple project containing one library, but it is impractical in a large project with dozens of lvlibs and classes.
Can anyone suggest a workaround for this behavior so that a project can be exported with all of its dependencies and without path corruption?
Thanks,
Rob
Message Edited by Rob Calhoun on 08-24-2009 03:10 PM
Attachments:
libraryproject.zip ‏9 KB
cant-save-lvlib.png ‏7 KB

I loved Ben's suggestion because it promised to be a low-effort workaround, but, alas, I get the same problem: "lvlib is already loaded from this path...".
I tried Olivia's workaround for CAR 124214. It worked great for the simple lvproj that is posted above. (Hooray!) It didn't work so well in my real project, that has about 30 lvlibs and lvclasses. About 3/4 of the way through the save, I got a compiler error and LabView crashed. (Boo!) I submitted the crash log on this, but it's hard to imagine how anyone in R&D could make any progress debugging this without the source code. (And I can't submit the source because I can't export a copy of it!)
Anyway, thank you very much Ben and Olivia for your suggestions. I have lvclasses embedded in lvlibs (primarily for organizational reasons) and since LabView tanked while saving one of those, perhaps the workaround doesn't work in this case. I may try again after removing the lvclasses from the lvlibs so that the hierarchy is flatter.
-Rob

ActiveDirectory mapping file, doesn't work for login

The mapping file below works.
Logged in as administrator, in the SAP NP administrator web tool,
I can see and edit users in the datasource (Active Directory).
However, when users in the AD try to login to the portal, they get "User authentication failed".
Default trace log show:
Authentication failed on LDAP server: back end message [LDAP: error code 49 - 80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 775, vece]
and
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key DS_AD_I
Any ideas on what in the configuration file below,
that could cause these errors ?
====================================
Configuration file
====================================
<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE dataSources SYSTEM "dataSourceConfiguration.dtd">
<dataSources>
 <dataSource id="PRIVATE_DATASOURCE"
 className="com.sap.security.core.persistence.datasource.imp.DataBasePersistence"
 isReadonly="false"
 isPrimary="true">
 <homeFor>
 <principals>
 <principal type="group"/>
 <principal type="user"/>
 <principal type="account"/>
 <principal type="team"/>
 <principal type="ROOT" />
 <principal type="OOOO" />
 </principals>
 </homeFor>
 <notHomeFor/>
 <responsibleFor>
 <principals>
 <principal type="group"/>
 <principal type="user"/>
 <principal type="account"/>
 <principal type="team"/>
 <principal type="ROOT" />
 <principal type="OOOO" />
 </principals>
 </responsibleFor>
 <privateSection>
 </privateSection>
 </dataSource>
 <dataSource id="AD_I"
 className="com.sap.security.core.persistence.datasource.imp.LDAPPersistence"
 isReadonly="false"
 isPrimary="true">
 <homeFor/>
 <responsibleFor>
 <principal type="account">
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="j_user"/>
 <attribute name="logonalias"/>
 <attribute name="j_password"/>
 <attribute name="userid"/>
 </attributes>
 </nameSpace>
 </principal>
 <principal type="user">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="firstname" populateInitially="true"/>
 <attribute name="displayname" populateInitially="true"/>
 <attribute name="lastname" populateInitially="true"/>
 <attribute name="fax"/>
 <attribute name="email"/>
 <attribute name="title"/>
 <attribute name="department"/>
 <attribute name="description"/>
 <attribute name="mobile"/>
 <attribute name="telephone"/>
 <attribute name="streetaddress"/>
 <attribute name="uniquename" populateInitially="true"/>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.usermanagement.relation">
 <attributes>
 <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE"/>
 </attributes>
 </nameSpace>
 <nameSpace name="$usermapping$">
 <attributes>
 <attribute name="REFERENCE_SYSTEM_USER"/>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 <principal type="group">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="displayname" populateInitially="true"/>
 <attribute name="description" populateInitially="true"/>
 <attribute name="uniquename"/>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.usermanagement.relation">
 <attributes>
 <attribute name="PRINCIPAL_RELATION_MEMBER_ATTRIBUTE"/>
 <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE"/>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.bridge">
 <attributes>
 <attribute name="dn"/>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 </responsibleFor>
 <attributeMapping>
 <principals>
 <principal type="account">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="j_user">
 <physicalAttribute name="samaccountname"/>
 </attribute>
 <attribute name="logonalias">
 <physicalAttribute name="samaccountname"/>
 </attribute>
 <attribute name="j_password">
 <physicalAttribute name="userPassword"/>
 </attribute>
 <attribute name="userid">
 <physicalAttribute name="null"/>
 </attribute>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 <principal type="user">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="firstname">
 <physicalAttribute name="givenname"/>
 </attribute>
 <attribute name="displayname">
 <physicalAttribute name="displayname"/>
 </attribute>
 <attribute name="lastname">
 <physicalAttribute name="sn"/>
 </attribute>
 <attribute name="fax">
 <physicalAttribute name="facsimiletelephonenumber"/>
 </attribute>
 <attribute name="uniquename">
 <physicalAttribute name="samaccountname"/>
 </attribute>
 <attribute name="loginid">
 <physicalAttribute name="null"/>
 </attribute>
 <attribute name="email">
 <physicalAttribute name="mail"/>
 </attribute>
 <attribute name="mobile">
 <physicalAttribute name="mobile"/>
 </attribute>
 <attribute name="telephone">
 <physicalAttribute name="telephonenumber"/>
 </attribute>
 <attribute name="department">
 <physicalAttribute name="ou"/>
 </attribute>
 <attribute name="description">
 <physicalAttribute name="description"/>
 </attribute>
 <attribute name="streetaddress">
 <physicalAttribute name="postaladdress"/>
 </attribute>
 <attribute name="pobox">
 <physicalAttribute name="postofficebox"/>
 </attribute>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.usermanagement.relation">
 <attributes>
 <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE">
 <physicalAttribute name="memberof"/>
 </attribute>
 </attributes>
 </nameSpace>
 <nameSpace name="$usermapping$">
 <attributes>
 <attribute name="REFERENCE_SYSTEM_USER">
 <physicalAttribute name="sapusername"/>
 </attribute>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 <principal type="group">
 <nameSpaces>
 <nameSpace name="com.sap.security.core.usermanagement">
 <attributes>
 <attribute name="displayname">
 <physicalAttribute name="displayname"/>
 </attribute>
 <attribute name="description">
 <physicalAttribute name="description"/>
 </attribute>
 <attribute name="uniquename" populateInitially="true">
 <physicalAttribute name="cn"/>
 </attribute>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.usermanagement.relation">
 <attributes>
 <attribute name="PRINCIPAL_RELATION_MEMBER_ATTRIBUTE">
 <physicalAttribute name="member"/>
 </attribute>
 <attribute name="PRINCIPAL_RELATION_PARENT_ATTRIBUTE">
 <physicalAttribute name="memberof"/>
 </attribute>
 </attributes>
 </nameSpace>
 <nameSpace name="com.sap.security.core.bridge">
 <attributes>
 <attribute name="dn">
 <physicalAttribute name="null"/>
 </attribute>
 </attributes>
 </nameSpace>
 </nameSpaces>
 </principal>
 </principals>
 </attributeMapping>
 <privateSection>
 <ume.ldap.access.server_type>MSADS</ume.ldap.access.server_type>
 <ume.ldap.access.context_factory>com.sun.jndi.ldap.LdapCtxFactory</ume.ldap.access.context_factory>
 <ume.ldap.access.authentication>simple</ume.ldap.access.authentication>
 <ume.ldap.access.flat_group_hierachy>true</ume.ldap.access.flat_group_hierachy>
 <ume.ldap.access.user_as_account>true</ume.ldap.access.user_as_account>
 <ume.ldap.access.dynamic_groups>false</ume.ldap.access.dynamic_groups>
 <ume.ldap.access.ssl_socket_factory>com.sap.security.core.server.https.SecureConnectionFactory</ume.ldap.access.ssl_socket_factory>
 <ume.ldap.access.server_name>machine.company.com</ume.ldap.access.server_name>
 <ume.ldap.access.user>[email protected]</ume.ldap.access.user>
 <ume.ldap.access.server_port>389</ume.ldap.access.server_port>
 <ume.ldap.access.base_path.user>OU=Users,OU=Company,DC=company-tst,DC=local</ume.ldap.access.base_path.user>
 <ume.ldap.access.password>$ume.ldap.access.additional_password.1</ume.ldap.access.password>
 <ume.ldap.access.base_path.grup>OU=Groups,OU=Company,DC=company-tst,DC=local</ume.ldap.access.base_path.grup>
 <ume.ldap.access.objectclass.user>User</ume.ldap.access.objectclass.user>
 <ume.ldap.access.objectclass.uacc>User</ume.ldap.access.objectclass.uacc>
 <ume.ldap.access.objectclass.grup>Group</ume.ldap.access.objectclass.grup>
 <ume.ldap.access.naming_attribute.user>cn</ume.ldap.access.naming_attribute.user>
 <ume.ldap.access.auxiliary_naming_attribute.user>samaccountname</ume.ldap.access.auxiliary_naming_attribute.user>
 <ume.ldap.access.naming_attribute.uacc>cn</ume.ldap.access.naming_attribute.uacc>
 <ume.ldap.access.auxiliary_naming_attribute.uacc>samaccountname</ume.ldap.access.auxiliary_naming_attribute.uacc>
 <ume.ldap.access.naming_attribute.grup>cn</ume.ldap.access.naming_attribute.grup>
 <ume.ldap.unique_user_attribute>samaccountname</ume.ldap.unique_user_attribute>
 <ume.ldap.unique_uacc_attribute>samaccountname</ume.ldap.unique_uacc_attribute>
 </privateSection>
 </dataSource>
</dataSources>

<?xml version="1.0" encoding="UTF-8" ?>
<web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
<display-name>WebApp</display-name>
- <welcome-file-list>
<welcome-file>login.html</welcome-file>
</welcome-file-list>
- <error-page>
<error-code>404</error-code>
<location>/Error.html</location>
</error-page>
<jsp-config />
</web-app>
This is a very simple war with no component and an error page is defined. But this doesn't work. When I type something like /loginnnn.htmllll, it doesn't give me the error page. That is my problem. Any idea???

Link to a file doesn't work anymore

I repeteadly made this experience: I link some text to a file and upload it via .mac. However, when I change the file, the link doesn't work anymore. Even if I set up the whole thing again and upload it, it doesn't work.
Seems like I get one chance per link and that's it.
Does anyone know how to get the link working again?
Message was edited by: Christian Stahl

I just started using iWeb last night for the first time and ran into the same (or similar) problem. I did it kind of backwards but that shouldn't matter I wouldn't think. I also came across another problem with text which was not supposed to be a hyperlink but ended up being one and one I couldn't turn off.
I created a text field, typed in some text, then made the text an active hyperlink and attached the link to a file. That first one worked OK. Then I copied and pasted that text field about ten times, changed the text slightly and set each text field to another different file link. I then published and tried the links using Safari. The first few links worked fine and the files were automatically downloaded to my downloads folder. However, clicking on the last few links downloaded files from the other previous text links instead of the ones they were supposed to even though the inspector shows the correct files. I even tried doing new text fields and new links but they still don't work correctly.
The other problem is that I created some more text fields to be used as descriptions for the file downloads by copying a hyperlinked text field. I realized after the copies were made and I had spent some time changing the text that these text fields carried over the linked hypertext attribute. Since I didn't want to type everything out again from scratch, I just turned off the hypertext link attribute in the inspector. However, after I saved the web site and then published the site, I discovered that the text was still linked to a file download. I went back into iWeb and that hypertext checkbox was now checked. I turned it off several times but every time I publish, it turns it back on by itself.
I am going to create the entire page over again from scratch and try the method of dragging files from the finder to initially create the link (got that from the help file).
Also it would be nice to have better/more file download features in iWeb such as being able to access a file picker where the web user could select files s/he wanted to download instead of requiring one button per file. Also, some way to automatically compress into one download a selection of several files.
-R

XPath: doesn't work for SOAP message?

My method
 * Get value of the node specified by an XPath.
 * @param item The starting context (e.g. document, node, node list).
 * @param xPath XPath to select single node value (e.g. "/root/data/value[1]/text()")
 * @return Result of xPath (the node's value) or null if failed.
 * @throws XPathExpressionException if xPath is wrong.
 static public String getXPathValue(Object item, String xPath) throws XPathExpressionException {
 String result = null;
 if (item != null && xPath != null) {
 try {
 result = XPathFactory.newInstance().newXPath().evaluate(xPath, item);
 } catch (NullPointerException npe) {
 //XPathFactory.newInstance() throws NullPointerException when called from ActiveX bean
 if (item instanceof Document) {
 result = getXPathValueApache((Document) item, xPath);
 }//else: input values not available
 return result;
 }//getXPathValue()works good enough for plain XML files (no namespaces). Now I have a SOAP XML message and my XPath doesn't work with this code - but it works with other XPath tools or my old Apache method:
 * Get value of the node specified by an XPath.
 * @param document Document to get node value of.
 * @param xPath XPath to select single node value (e.g. "/root/data/value[1]/text()")
 * @return Result of xPath (the node's value) or null if failed.
 * @throws org.w3c.dom.xpath.XPathException if XPath result object is not of type XPathResult.
 * @see <a href="http://www.w3schools.com/xpath/default.asp">XPath Tutorial</a>
 static private String getXPathValueApache(Document document, String xPath) throws org.w3c.dom.xpath.XPathException {
 String result = null;
 if (document != null && xPath != null) {
 org.w3c.dom.xpath.XPathEvaluator evaluator = new org.apache.xpath.domapi.XPathEvaluatorImpl(document);
 Object o = evaluator.evaluate(xPath, document, evaluator.createNSResolver(document), org.w3c.dom.xpath.XPathResult.FIRST_ORDERED_NODE_TYPE, null);
 if (o != null) {
 if (o instanceof org.w3c.dom.xpath.XPathResult) {
 org.w3c.dom.xpath.XPathResult xpResult = (org.w3c.dom.xpath.XPathResult) o;
 Node node = xpResult.getSingleNodeValue();
 if (node != null) {
 result = node.getNodeValue();
 } else {
 throw new org.w3c.dom.xpath.XPathException(org.w3c.dom.xpath.XPathException.TYPE_ERR, "XPath '"+xPath+"' didn't return an object of type XPathResult!");
 }//else: no result for XPath
 }//else: input values not available
 return result;
 }//getXPathValue()The XPath is quite simple and I also had it in 2 ways: short and long:
//rsp:SessionId[1]/text()
/SOAP:Envelope/SOAP:Header/rsp:Response/rsp:SessionId/text()
Why doesn't this work with the standard
XPathFactory.newInstance().newXPath().evaluate(xPath, item)
?

Hi,
I have cancelled your Export PDF subscription for the order no.AD013879714.
Your refund no.is 66181172.
You will get the refund in 7 business days.
Regards,
Florence

Create AAC from Wav file doesn't work

I've converted many WAV files to AAC and it worked fine. The last few times I've tried it it isn't working. I hear the bleep which I think indicates it's been converted but I can't find it anywhere so assume it didn't happen.
I have Windows XP. I am running iTunes 10.3.1.55
Any ideas would be appreciated.
Thanks,
Ginny

Hello,
thank you for your Help.
But I just want to read a Binary File, which is build by another program. And this is coded with 8Bit (like a normal Binary File) and not just with 7Bit (ASCII). So the workaround doesn't work in my case.
I posted the Test-VI in my first post (here once again as picture). And it works fine on the PC, but if I try it on my MCB2400 the "Read Form Binary File" Node doesn't work.
And it is also possible to open the Bin file with the "Read Text File" Node and see the cryptic content of the Bin-File. So the Problem seems to be in the "Read Form Binary File" Node.
bye & thanks again
amin
Message Edited by aminat on 09-30-2009 03:28 AM

Converting a Keynote document to Powerpoint file doesn't work

I tried to convert Keynote documents to PowerPoint files that can be viewed and edited by PowerPoint users on Windows or Mac OS computers. All I got was a error. Can any one tell me how to make this work.I did every thing that was in the instructions.
To create a PowerPoint slideshow:
Choose File > Export and then click PowerPoint.
Click Next.
Type a name and choose a location for the file, and then click Export.

Hy Kyn, thank you for answering.
Every slide on my presentation has animated objekts. And every slide is linked (by hyperlink) to every slide on the presentation. So I want to give the user the chance to interrupt and to go to next slide. Therefore is an arrow to klick on, which has a hyperlink to next side (or do go to start, or to go back) - during the slide-animation is working.
That works fine in keynote, but it doesn't work after the export in QT. In QT it is not possible to interrupt the sequence of the animation. When the sequence is (performed) finalized, the klick on the arrow works, and I can go to next slide.
But interruption is not pssible.
Tanks in advance for your answer!
Best regards - Renate

Large file doesn't work in a message-splitting scenario

Similar Messages

Maybe you are looking for