Last entry in BDC table

hi wht is the fieldvalue of last entry in the bdc table ? is it '/11' or F11.

Hi Pavan,
It is based on the T-code also. If the t-code is SP01 then ok-code is /ECBAC. If t-code is FB65 then ok-code is =YES. Mostly it will be /11. It will chage some times but action is the same.
Hope this helps you. Reply for queries, shall post the updates.
Regards.
Kumar.

Similar Messages

Unable to delete last entry in Custom table

Hi,
I have one custom table which allows only some specific entries to be maintained in the table.I have used a standard table as a check table for dis.I found no issue while maintaining entries in the table.But when i try to delete the last entry in the table i get the message "No entry exist".Long textNo entries were found when importing data from the database.
Kindly help.

Hi,
If it is not possible through table maintainence then write a small Z program to delete the entries in devlopment system and then if then if you want you can transfer those to other systems.
delete from ZTABLE where {give your condition for the last record}.
Regards,
Sandipan

Select a count using the last entry of a table

I have a huge project for which I am trying to learn some PL/SQL.
Context:
Entry gets put into the Orders table. What I want to do is create a trigger( out of scope for this question) that takes the last entry's product ID number and performs a count of all the PID's that match it. Then I want to compare that number with a number in the ProductTransaction table.
I.e.
Orders ProductTransaction
OID TID
PID PurchaseCount
o_TID Price
etc.....
Last entry that gets put in contains
OID PID TID
4 100 2
ProductTransaction
TID PurchaseCount Price
2 10 100.00
What I want to do is if the last entry into the Orders table was the OID 4 then I want to count all PID=100 and determine if the PurchaseCount has been reached yet.
The only thing I can think of is the following, but it doesn't ensure that the last PID is what we are counting:
declare
v_countpid number;
begin
select
count(pid) into v_countpid
from
orders
where OID = (select last(oid) from orders);
dc
Im thinking something like the above which populates the v_countpid
and then taking another variable which is a select into which takes the last TID entered and comparing them in an if statement of some sort
Let me know your thoughts on this....

They you both for your replies. I was pushing myself to stay up late last night and I guess I didn't included everything.
Here it goes.
The concept is to have someone buy a product lets say at 10 dollars and it will take 10 other people for you to finally get your product released to you.
So when I purhcase PRODUCT A and put the entry into the orders table it will be something like this:
OID = 1
PID = 101
TID = 2
TIMEOFPURCHASE=<timestamp>
etc........
Now once that is entered into the table I am going to have a trigger as an after insert that will count the total PID's in the table that match what I just put into it, as in this case it was PID=101. The count of PID=101 will then be matched against the ProductTransaction PurchaseCount field to determine if that product should be released to the person with the lowest timestamp.
So....
ProductTransaction
TID=2
PRICE=$10
PurchaseCount=10
ORDERS
OID PID TID TOP
1 101 2 3 am
2 101 2 5 am
3 30 1 12 pm
4 101 2 4 pm
Example. The last entry was OID=4 so it will count up the number of PID=101 and then that number is compared against ProductTransaction purchase count. If hasn't exceeded then nothing happens. If the number is matched then OID=1 is moved into the shipping table for processing.
Let me know if this still doesn't clarify, or if there is a better way to do this....

Mismatch in last entry in OJDT table and Nextval in series numbering setup

Dear Support Team,
We are getting FIRST DEFINE THE NUMBERING SERIES IN THE ADMINISTRATION MODULE ERROR ON ADDING ANY DOCUMENT.
We checked for authorisation , group and posting periods. Everything in it's place.
There is a mismatch in the last transid of OJDT table and the Nextval generated in document numbering series setup.
How do we correct this.
Any help would be greatly appreciated.
Thanking you
Pradnya

Hi,
We solved it by locking the erroneous series and by creating a new one. But your suggestion was more right and practical.
Thanks for the valuable suggestion. We will keep this in mind.
Thanking you
Pradnya

BDC Table Controler

hi friends,
Could u please tell me what BDC TABLE CONTROLER
in which cases we can use the bdc Table Contorler
Regards
srinu y

Hi srinu,
Check this link
http://www.sap-basis-abap.com/abap/handling-table-control-in-bdc.htm
How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
Reward with points if it is helpful
Cheers
Alfred

BDC table control using Excel sheet upload

Hi All,
I am working BDC table control.I want to upload the From excel sheet.I am using the FM ALSM_EXCEL_TO_INTERNAL_TABLE to upload the the data into my internal table.The data is populating in the internal table.
Now i have problem tat how to populate this excel sheet data to the Bdc table control.
Can nybody help me out.\[removed by moderator\]
Thanks,
Swapna.
Edited by: Jan Stallkamp on Jul 25, 2008 10:57 AM

after fetching data from EXCEL sheet, each column data (in excel sheet) will be uploaded to individual record into your internal table along with row number and column number, loop through that internal table and collect all your excel data into record format.pls refer the below code.
data:
 i_excel type alsmex_tabline occurs 0 with header line,
 l_row type i value 1.
data:
 begin of x_data occurs 0,
 kunnr like RF02L-KUNNR,
 klimk(17) type c,
 CTLPC like knkk-CTLPC,
 end of x_data,
 begin of x_data1 occurs 0,
 data(106),
 end of x_data1.
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 exporting
 filename = p_fname
 i_begin_col = 1
 i_begin_row = 1
 i_end_col = no.of columns in your excel file
 i_end_row = no.of rows in your file
 tables
 intern = i_excel.
if sy-subrc = 0.
 loop at i_excel.
 if l_row <> i_excel-row.
 append x_data.
 clear x_data.
 endif.
 case i_excel-col.
 when 1.
 x_data-kunnr = i_excel-value.
 when 2.
 x_data-klimk = i_excel-value.
 when 3.
 x_data-CTLPC = i_excel-value.
 endcase.
 l_row = i_excel-row.
 clear i_excel.
 at last.
 append x_data.
 endat.
 endloop.
endif.
then loop through the internal table X_DATA, pass the data to your table control like.
tbl_control-field1(1) = x_data-field1.
tbl_control-field2(1) = x_data-field2.
tbl_control-fieldn(1) = x_data-fieldn.
Regards,
Sreeram.

How to delete the NULL entries in nest table

Hi,
After I used a loop and open/fetch cursor populated the object table
I found there are random NULL entries in my object table (nest table)
The data look like this
NULL NULL NULL
NULL NULL NULL
123 03-MAY-04 ACTIVE
NULL NULL NULL
NULL NULL NULL
234 21-MAY-04 ACTIVE
NULL NULL NULL
345 11-MAY-04 ACTIVE
NULL NULL NULL
How can I get rid of those NULL entries in my nest table? So it can become
123 03-MAY-04 ACTIVE
234 21-MAY-04 ACTIVE
345 11-MAY-04 ACTIVE
Additional info:
create type myType as object
(id NUMBER (10,0),
eff_date date,
status VARCHAR2(17)
create type myNestTab as table of myType;
I have tried Delete procedure in following two ways.
Version 1:
FOR i IN l_my_nest_tab.FIRST..l_my_nest_tab.LAST
LOOP
IF l_my_nest_tab(i).id IS NULL THEN
l_curr_event_tb.DELETE(i);
 END IF;
END LOOP;
Version 2:
FOR i IN l_my_nest_tab.FIRST..l_my_nest_tab.LAST
LOOP
IF l_my_nest_tab(i) IS NULL THEN
l_curr_event_tb.DELETE(i);
 END IF;
END LOOP;
Both of them give me the error no data found. And only left me the first NOT NULL entry in the table.
123 03-MAY-04 ACTIVE
Thanks in avdance.

Hi Vishnu,
u can write a report program for this and in that use the event :
AT NEW <field-name> ( use primary key)
your statements
ENDAT
for eg.
loop at itab ( herfe itab must be of type of table for which u want to track new entries)
at new matnr
write:/ new record
endat
endloop.
schedule this report in background to run in every 5 or 10 mins as per your requirement and hence changes can be tracked.
regards
Vinod

What are the fields in BDC table

hi
what are the fields in BDC table. what is the last entry

hi,
BDC table structure
FIELD                     TYPE                            DESCRIPTION
Program                CHAR (8)                      Program name of transaction.
DynPro                   CHAR (4)                      Screen number of transaction.
DynBegin               CHAR (1)                      Indicator for new screen.
Fnam                     CHAR (35)                     Name of database field from screen.
Fval                       CHAR (80)                     Value to submit to field.
Hope this is helpful, Do reward.

Last Entry Date for Each Quarter

Hi,
I want to find out the last entry date for each quarter. The query I am using is this:
SELECT
Country.Name as Country,
CONVERT(DATE,MAX([CreationDate])) as LastDateOfClipEntry,
DATEPART(Year,([CreationDate])) as Year,
DATEPART(Quarter,([CreationDate])) as Quarter
FROM
[dbo].[Clip]
JOIN Office on Office.Code = Clip.Office
JOIN Country on Country.Code = Office.Country
WHERE YEAR(CreationDate) IN (@YEAR)
GROUP BY Country.Name,DATEPART(Year,([CreationDate])) ,DATEPART(Quarter,([CreationDate]))
ORDER BY Country.Name
Now based on the column group I added in my report the result is coming correct but not properly formatted as I want.
Below is the snapshot how its coming now:
I don't want the extra blanks coming for each occurrence. There should be only one line for Australia and in the single line it should show the last entry date for that quarter. How can I achieve that ? Below is the snapshot showing current config:
Thanks a lot in advance. Any help would be appreciated.
Vivek Kamath

Hi Vik2907,
According to your description, you have a matrix which shows you those unexpected cells. Right?
In this scenario, the reason caused this problem is the group setting. Mostly, you set the row group on a wrong field. As we tested in our local environment, if you set the row group on LastDateOfClipEntry, it will render the data as the screenshot you post.
Please check both Row and Column Group setting, make sure they are group on proper field.
Reference:
Tables, Matrices, and Lists (Report Builder and SSRS)
Understanding Groups (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Fetch last record from database table

hi,
how to fetch last record from database table.
plz reply earliest.
Regards,
Jyotsna
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Dec 11, 2009 9:44 AM

abhi,
just imagine the table to be BSEG or FAGLFLEXA... then what would be performance of the code ?
any ways,
jyotsna, first check if you have a pattern to follow like if the primary key field have a increasing number range or it would be great if you find a date field which stores the inserted date or some thing..
you can select max or that field or order by descending using select single.
or get all data.. sort in descending order.(again you need some criteria like date).
read the first entry. using read itab index 1

Who have made the entry in Z table

Hi Friends,
Can anyone tell me - how to find out who have made the entry in Z table ?
Sonal

Hi sonal,
I want to say that if logging of tables is on in your server and you have also make log on in Technical settings of the table then you will be able to see the log using 'SE14'.
First consult with basis about the setting of server and if they have set logging of tables ON
THEN
goto se11 and give your table name.
open the table and click on 'Technical Settings'
in last their is a check box 'Log data Changes'
Check if this is on or not.
If both condition are ok then you can check the log of your table in SE14
using 'Object Log' button in application tool bar.
Regards,
Wasim Ahmed

BDC table contrlols

Can anyone explain me difference betweeon Normal BDC and BDC Table Controls.
I know they use SPLIT and CONCATENATE for table controls.But they actually do i dono.
Plz tell me.

Hi Shilpa Priya
In normal BDC we jus handle all the perform statements and no coding
but in BDC with table controls we need to handle the table control records specially by commenting the perform statements related to table controls
if u see the below program u can understand
jus see this program it is fine working
i have done this in ecc5
first of all go for SHDB for recording
select new recording
provide name for recording and Tcode for which u need to do recording ex xk01
choose start recording
provide some dummy data in all the screens
at last screen save so that u can refer it for future use
go back
u will be at first screen
now select the recording name which u have done using SHDB
and go for create new program
give a name for program
provide attributes and save
now choose source code
now u will be in editor with almost 70% code
now u need to handle table control fields and perform statements
jus go through the program which i have posted before
and refer the glat file that is to be created with tab delimited and exact field length
Program which i have executed and got the correct output
REPORT Z_XK01_REC_PRG_MUL_CTRL_FIELDS
NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES: RF02K,LFA1,LFBK,LFB1,LFM1.
DATA: BEGIN OF IT_ITAB OCCURS 0,
LIFNR LIKE RF02K-LIFNR,
BUKRS LIKE RF02K-BUKRS,
EKORG LIKE RF02K-EKORG,
KTOKK LIKE RF02K-KTOKK,
NAME1 LIKE LFA1-NAME1,
SORTL LIKE LFA1-SORTL,
LAND1 LIKE LFA1-LAND1,
BANKS(6) TYPE C,
BANKL(17) TYPE C,
BANKN(19) TYPE C,
AKONT LIKE LFB1-AKONT,
FDGRV LIKE LFB1-FDGRV,
WAERS LIKE LFM1-WAERS,
END OF IT_ITAB.
DATA: BEGIN OF BANKS OCCURS 0,
BANKS LIKE LFBK-BANKS,
END OF BANKS.
DATA: BEGIN OF BANKL OCCURS 0,
BANKL LIKE LFBK-BANKL,
END OF BANKL.
DATA: BEGIN OF BANKN OCCURS 0,
BANKN LIKE LFBK-BANKN,
END OF BANKN.
DATA : FLD(20) TYPE C,
CNT(2) TYPE N.
INCLUDE BDCRECX1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'Z:/SS/MUL_REC_TAB.TXT'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE = VIRUS_SCAN_PROFILE
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH = FILELENGTH
HEADER = HEADER
TABLES
DATA_TAB = IT_ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM OPEN_GROUP.
LOOP AT IT_ITAB.
REFRESH BDCDATA.
REFRESH: BANKS,BANKL,BANKN.
SPLIT IT_ITAB-BANKS AT ',' INTO TABLE BANKS.
SPLIT IT_ITAB-BANKL AT ',' INTO TABLE BANKL.
SPLIT IT_ITAB-BANKN AT ',' INTO TABLE BANKN.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF02K-LIFNR'
IT_ITAB-LIFNR.
PERFORM BDC_FIELD USING 'RF02K-BUKRS'
IT_ITAB-BUKRS.
PERFORM BDC_FIELD USING 'RF02K-EKORG'
IT_ITAB-EKORG.
PERFORM BDC_FIELD USING 'RF02K-KTOKK'
IT_ITAB-KTOKK.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'LFA1-NAME1'
IT_ITAB-NAME1.
PERFORM BDC_FIELD USING 'LFA1-SORTL'
IT_ITAB-SORTL.
PERFORM BDC_FIELD USING 'LFA1-LAND1'
IT_ITAB-LAND1.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
*perform bdc_field using 'LFBK-BANKS(01)'
'DE'.
*perform bdc_field using 'LFBK-BANKS(02)'
'DE'.
*perform bdc_field using 'LFBK-BANKL(01)'
'11111111'.
*perform bdc_field using 'LFBK-BANKL(02)'
'10010010'.
*perform bdc_field using 'LFBK-BANKN(01)'
'534634634'.
*perform bdc_field using 'LFBK-BANKN(02)'
'986678443'.
*perform bdc_dynpro using 'SAPMF02K' '0130'.
MOVE 1 TO CNT.
LOOP AT BANKS .
CONCATENATE 'LFBK-BANKS( ' CNT ' ) ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKS-BANKS.
CNT = CNT + 1.
ENDLOOP.
MOVE 1 TO CNT.
LOOP AT BANKL .
CONCATENATE 'LFBK-BANKl( ' CNT ' ) ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKL-BANKL.
CNT = CNT + 1.
ENDLOOP.
MOVE 1 TO CNT.
LOOP AT BANKN .
CONCATENATE 'LFBK-BANKN( ' CNT ' ) ' INTO FLD.
PERFORM BDC_FIELD USING FLD BANKN-BANKN.
CNT = CNT + 1.
ENDLOOP.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0210'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'LFB1-AKONT'
IT_ITAB-AKONT.
PERFORM BDC_FIELD USING 'LFB1-FDGRV'
IT_ITAB-FDGRV.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0215'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0220'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0310'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'LFM1-WAERS'
IT_ITAB-WAERS.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0320'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_DYNPRO USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=YES'.
PERFORM BDC_DYNPRO USING 'SAPMSRD0' '0102'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RSRD1-TBMA_VAL'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BACK'.
PERFORM BDC_FIELD USING 'RSRD1-TBMA'
'X'.
PERFORM BDC_TRANSACTION USING 'XK01'.
ENDLOOP.
PERFORM CLOSE_GROUP.
notepad : (flat file )
bScdefgh 0001 0001 0001 sangeethachintakOMALI sss DE DE,DE 11111111,10010010 534634634,986678443 62130 A3 AUD
with tab delimited
all the best

Manage a new entry into V_T020R table for RFEBBECODA00 program

Hello SDN,
For the bank statement integration with the Belgium format Coda 2.1, I need to use a new conversion program so called RFEBBECODA00. This program is an update of RFEBBE00.
The customizing table V_T020R (OT61 transaction) allows to manage a dedicated variant for FEBC user transaction and the program used for file conversion to Multicash.
I do not need to use anymore RFEBBE00 program, but I am not able to manage a new entry into V_T020R for the new program RFEBBECODA00.
Any idea on how too update V_T020R in order to keep using FEBC transaction ?
Many thx for your help.
Regards,
Aurelien

Guess you have completed all the manual activities specified in the attachmet to the following SAP Note.
https://service.sap.com/sap/support/notes/1035142
In the attachment titled "Manual_Activities_Required_FI.doc" to the above SAP Note, the last step to add an entry to table T020R. I was just wondering if completing the manual activities is a prerequisite to add a new entry to the table T020R. As such, if you go to OT61 transaction, you don't see the 'New Entries' button.
The attachment to the above SAP Note has the following text as a last step.
Also maintain the following entry in Table T020R:
MANDT TCODE REPID VARIANT NSHOW
000 FEBC RFEBBECODA00
Activate the table. Now run transaction FEBC and check if the program RFEBBECODA00 is being displayed.
As per the Note, complete the manual activities, then apply the correction instruction in the Note, activate the program and then maintain the text symbols and selection text a shown in the document. Just check the note in the above link and follow the instructions. Let me know if you finally succeed in maintaining this entry in table T020R. I'll be happy to hear a 'yes' from you!

Unable to display data no entry in the table without using Model clause

Hi,
I've an urgent requirement described below :
The previously posted Question has been answerted using Model Clause:
Is there any way out to solve it without using Model clause:
I've a table named as "sale" consisting of three columns : empno, sale_amt and sale_date.
(Please ref. The table script with data as given below)
Now if I execute the query :
"select trunc(sale_date) sale_date, sum(sale_amt) total_sale from sale group by trunc(sale_date) order by 1"
then it displays the data for the dates of which there is an entry in that table. But it does not display data for the
date of which there is no entry in that table.
If you run the Table script with data in your schema, then u'll see that there is no entry for 28th. Nov. 2009 in
sale table. Now the above query displays data for rest of the dates as its are in sale table except for 28th. Nov. 2009.
But I need its presence in the query output with a value of "sale_date" as "28th. Nov. 2009" and that of "total_sale" as
"0".
Is there any means to get the result as I require?
Please help ASAP.
Thanks in advance.
Create table script with data:
CREATE TABLE SALE
EMPNO NUMBER,
SALE_AMT NUMBER,
SALE_DATE DATE
SET DEFINE OFF;
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('12/01/2009 10:20:10', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/30/2009 10:21:04', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/29/2009 10:21:05', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/26/2009 10:21:06', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE('11/25/2009 10:21:07', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 5000, TO_DATE('11/27/2009 10:23:06', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 4000, TO_DATE('11/29/2009 10:23:08', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 3000, TO_DATE('11/24/2009 10:23:09', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 2000, TO_DATE('11/30/2009 10:23:10', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 7000, TO_DATE('11/24/2009 10:24:19', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 5000, TO_DATE('11/25/2009 10:24:20', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 3000, TO_DATE('11/27/2009 10:24:21', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 2000, TO_DATE('11/29/2009 10:24:22', 'MM/DD/YYYY HH24:MI:SS'));
Insert into SALE
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 1000, TO_DATE('11/30/2009 10:24:22', 'MM/DD/YYYY HH24:MI:SS'));
COMMIT;
Any help will be needful for me
Regards,

select sale_date,sum(sale_amt) total_sale
from
select empno,0 sale_amt,(sale_date + ao.rn) sale_date
from
select empno,sale_amt,sale_date ,(t.nxt_dt - t.sale_date) diff
from
select empno
,sale_amt,trunc(sale_date) sale_date
,trunc(nvl(lead(sale_date) over (partition by 1 order by sale_date),sale_date)) nxt_dt
from sale
) t
where (t.nxt_dt - t.sale_date) >1
) rec,(select rownum rn from user_objects where rownum<=200) ao
where ao.rn <=(rec.diff-1)
union all
select empno,sale_amt,trunc(sale_date) sale_date
from sale
group by sale_date
order by 1;
~~~~Guess this will serve the purpose...
Cheers Arpan

Fields in a BDC table

hai gurus....
What are the fields in a BDC table???
Thanks
Pavan

hi,
i hope this answer will helps you..........,
the BDCDATA table contains fields are...
BDCDATA-PROGRAM-----> this field describes the module pool program name which we are used for vaidating and updating the data.
BDCDATA-DYNPRO----
> this field describes the currently active screen.
BDCDATA-DYNBEGIN-------> this field describes the default or initial screen.
BDCDATA-FNAM----
> this field describes the field name which we are used in validations.
BDCDATA-FVAL----
> this field describes the field value which we are used in validations.
by using the above table we perfome the mapping logic in BDC for validating and updating the legacy system data.
regards,
Ashok Reddy
Message was edited by:
Ashok Reddy

Last entry in BDC table

Similar Messages

Maybe you are looking for