Launch multiple web services with 1 click

Hi all,
I am looking into an extension of our ApEx solution. Current situation:
- ApEx is used to fill in information (descriptions on reports). BIP is used to save this information in a file with a certain lay-out
- works as follows: user adds/changes information, presses a button and a file is saved somewhere (webservice -> BIP -> FTP output)
The change that I want to implement:
some fields are used on multiple output files. I would like to update all outputs after changing 1 field. This would mean: if a description is changed, I need to go into each report that needs the output, and launch the web service manually. Of course this is a tedious job and very error-prone. I would like to automate this. Whenever a field is saved, launch the web service for each report containing this field.
The biggest problem I'm having is launching the web service inside some sort of loop? Any tips/hints?
Thanks!

Similar Messages

Combine multiple web services with the same SQL query into one

Hello,
I would like to ask a question regarding combine multiple similar web services into one. Can you please tell me if it is possible to combine 4-5 web services into one since they built on the same SQL query with 5 different criterias or condition so that the user can enter any of the 5 criterias to populate the data on the form instead of having 5 different web services?
e.g Query: Select appName, permit#, address, phone, description, type, section, from table where appName = can be 'appName, permit#, address, phone, or description' to populate the rest of the data to the form.
Does any one have ever done some thing like this in Workbench ES? If so please assist. I know it can be easier to build it in Visual Basic, C#, or dot.net but the requirement is to build it in workbench ES.
Thanks in advance,
Han Dao

If you are querying for Name, PhoneNumber, and SSN, and you queried for all people with a phone number that started with 867, you would have a potentially long list of people. So to keep track of all of the people, we store each record in XML complex elements. The root node is just any name you want, and the repeating element is the complex element name.
So using the example from above, I'm going to specify the following:
 Root Node: Result
 Repeating Element: Person
So now when I do a query, my resultXML will look like:
<Result>
 <Person>
 <Name>Alex</Name>
 <PhoneNumber>867-5309</PhoneNumber>
 <SSN>111-11-1111</SSN>
 </Person>
</Result>
If your query returned multiple results (like ours would probably), it would look like:
<Result>
 <Person>
 <Name>Alex</Name>
 <PhoneNumber>867-5309</PhoneNumber>
 <SSN>111-11-1111</SSN>
 </Person>
 <Person>
 <Name>Han</Name>
 <PhoneNumber>867-2169</PhoneNumber>
 <SSN>222-22-2222</SSN>
 </Person>
</Result>
So Result and Person is just to give a little bit of structure to the xml result (containers really). So you can name them whatever is helpful for you.
The column name mappings map the query columns (Name, PhoneNumber, SSN) to some node in the XML (Name, PhoneNumber, SSN). So you don't need to specify which field maps to what in the form. Just copy the column names to the element name so you have a 1-to-1 naming. If you want to manipulate the XML a bit though, you could do:
Column Name Element
Name YourName
PhoneNumber Phone
SSN Secret
which would then make your xml look like:
<Result>
 <Person>
 <YourName>Alex</YourName>
 <Phone>867-5309</Phone>
 <Secret>111-11-1111</Secret>
 </Person>
</Result>
It lets you change the XML element names to whatever you want. Otherwise by default they take on their column names.
In your form, you could bind to the WSDL through the Data Connections pane and point it to your web service. This will then create form elements that you can just drag and drop allowing you to have the information available when the service gets ran. Once the service is called, you can modify the field's data to get whatever information you need in order to populate other form fields.
If that is too confusing, feel free to send me your form (e-mail is on profile page) and I'll add comments to it to show you how to set up the form for the web service call (and also give me the link to your webservice)

Regarding multiple web service

Hi,
I am working on web services in EJB.
for securing the web service, we use jboss-wsse security.
Can i have multiple web services with few web services being secured and the others in-secured?
Thanks in advance.

Friends,
Can you please help me out with this logic? Thanks!

Web service with multiple out parameters

Hi Developers,
I have been playing around with som web services in the developer studio.
I can create a webservice from a normal ejb.
But i can only get one out parameter, which is the return parameter of the ejb.
I tried to make an object to use as return parameter, but then i couldn't use the method for the web service.
Can anyone tell me how to make a web service with multiple out parameters?
Br Rasmus

Hi Developers,
I have the same question, is it possible to have multiple outgoing parameters?
When not, does SAP Netweaver knows a IN-OUT parameter? Because I found on the internet that it is possible to have a IN-OUT parameter. But that was with the BEA Weblogic 8.x.
When not, is then the only solution to return a object? With in this object all the parameters you want.
Or otherwise is there a other workaround?
Thanks in advance,
Marinus Geuze

Is it possible to define multiple web services in one project?

I'd like to publish multiple components within one project as web services. but when I try to create it using the project New menu, it only prompts me and allows me to select one component . So does this mean only one web service can exist in one project?

Sunil
Thanks for the prompt reply.
I think I should have worded my question more clearly.
I have a project with multiple Java classes. I'd like to convert two of them into web services.
There are two ways to co this.
1. I right click on each class and select the Generate J2EE Web Service option. This will work correctly and allow multiple web services to be generated.
but this is not what I want to do .
What we are trying to do is to generate web services at the project level. I am following instructions in OTN web services tutorial :
http://www.oracle.com/technology/obe/obe1013jdev/ws/wsandascontrol.htm
So , this is what I do :
1. Right-click on my project and select New from the context menu.
2. In the New Gallery, expand Business Tier in the Categories list and select Web Services, then select Java Web Service from the Items list. Click OK.
3. In the Select J2EE Web Service Version dialog, select J2EE 1.4 (JAX-RPC) Web Service, then click OK.
4. Click past the welcome page
5. This brings me to the page where I can select the web service and class.
This is where I am stuck - it seems I can only select one web service here . Unless I am missing something.
Or should I just repeat the process multiple times - running the wizard once for each class ?
Thanks for the help.

Certificate error while connecting to multiple web service

I am having a web service test client through which I can connects and get reports from multiple web services.
In Development unix box, we are using "self-signed certificate" using keystore type JKS. In Production server, we are using certificate from CA.
The web service is running in Development and in Production.
Now I have developed single test client with a drop down selection for different web services. For example, if we select "Development", the request will go the development web service and if we select "Production", the request will go to Production web service.
Now while connecting to Develpment service, we are settings the below certificates details Because we are using the self signed certificate.
System.setProperty("javax.net.ssl.keyStore",keyStoreFileLocation);
System.setProperty("javax.net.ssl.keyStorePassword",keyStorePassword);
System.setProperty("javax.net.ssl.keyStoreType", keyStoreType);
System.setProperty("javax.net.ssl.trustStoreType",trustStoreType);
System.setProperty("javax.net.ssl.trustStore",trustStoreFileLocation);
System.setProperty("javax.net.ssl.trustStorePassword",trustStorePassword);
I am clearing the System properties using the System.clearProperty() while pointing to Production service. because in Production we are using the CA certificate from Thawte so these details are not required at all and our JRE (java 5) is pre configured to support that CA certificate.
I am using Resin-2.1.12, axis1.2 and java5.
Now the problem is
(1) for the first time, when I send the request to Production Service URL, the report gets generated. For the next time when we are running against Development, it's giving below certificate error.
sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
(2) Now restart resin and run the test client against Developemnt service URL, here report gets generated and for the next time, run the test client against Production, it's giving the certificate error.
So for the 2nd request, it always gives the error irrespective of the web service instance selected.
Please suggest ....thanks in advance.

Hi ,
No, due to the issue is happening only on one computer.
The error "(401) Unauthorized" usually indicates that the connection has been established but the permission check fails. InfoPath Form Services uses the application pool identity of the web
application to connect to resources.
Does the account which login the computer have permission to connect to User Profile Service Application?
For a workaround, you can go to IIS Manager , set the User Profile Application Pool to Anonymous Access and try again.
Also you can have a look at the blog:
http://sharepointconnoisseur.blogspot.in/2011/04/how-to-resolve-401-unauthorized-error.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

Calling Reporting Services Web Service with jQuery possible?

Hi,
is it possible to call the Reporting Services Web Service with jQuery? If yes, can someone post me a small example?
Background:
My plan is to create a html with a form which is also uploaded then into the reportserver. I open this html later by clicking a link in a report (with gotoURL open.window). The report opens the html inclusive the overtaken of some additional parameters
(reportname, reportdescription). These parameters I will use in the html-form as defaultvalues for the corresponding input-text-fields. Now the user can make some changes (i.e. the decription). With a click on a button I will send the new description to
the Reporting Services Web Service by using the SetProperties method, closing the html-window and reload the report. Important is that I want to upload the html also into the reportserver itself.
I have already found how to consume a web service via jQuery but with the Reporting Services Web Service I did not get it running in my tests.
I have referenced to the following jQuery.js: http://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js
Here you can see my tests I made with the results:
$.ajax({
type: 'POST',
url: 'http://<..>/ReportServer/ReportService2010.asmx/ListChildren',
data: {'ItemPath':'/','Recursive':false},
complete: function(xData, status) {
$('p').html($(xData.responseXML).text()); // result
$("#divStatus").text( status ); // status }
I got a NULL response with Status success. But where are the items?
Another test which should response only one value was that:
$.ajax({
type: "POST",
contentType: "text/xml; charset=utf-8",
url: "http://<..>/ReportServer/ReportService2010.asmx/GetItemType",
data: {"Item":"/Development"}, // Development is a Folder in my Reportserver-Root
dataType: "xml",
success: function (msg) {
$("#divResult").html(msg.responseXML);
error: function (data, status, error) {
$("#divResult").html("WebSerivce unreachable " + data.responseXML + " (" + error + ")");
Here I got an [object Error]
And here my last test:
var soapMessage = '<?xml version="1.0" encoding="utf-8"?>\
<soap:Envelope \
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" \
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" \
xmlns:xsd="http://www.w3.org/2001/XMLSchema">\
<soap:Body>\
<GetItemType xmlns="http://www.microsoft.com/sql/ReportingServer">\
<ItemPath>/Development</ItemPath>\
</GetItemType>\
</soap:Body>\
</soap:Envelope>';
$.ajax({
type: "POST",
contentType: "text/xml; charset=utf-8",
url: http://<..>/ReportServer/ReportService2010.asmx?wsdl,
data: soapMessage,
dataType: "xml",
success: processSuccess,
error: processError
function processSuccess(data, status, req) {
if (status == "success")
$("#response").text($(req.responseXML).find("Type").text());
function processError(data, status, req) {
alert(req.responseText + " " + status);
Here I got an "Undefined error"
Can anyone help me?
Thanks
René Illner

Hi Rene,
I have one vbscript class to call web services. May be if you need you can use it.
 dim ws
 set ws = new webservice
 ws.url = "http://servername/ReportServer/ReportService2010.asmx"
 ws.method = "MethodName"
 ws.parameters.Add "Parameter1", "Param1 Desc.."
 ws.parameters.Add "Parameter2","[email protected].."
 ws.execute
 set ws = nothing
'------web service calling class
class WebService
public Url
public Method
public Response
public Parameters
public function execute()
 dim xmlhttp
 Set xmlhttp = CreateObject("Microsoft.XMLHTTP")
 xmlhttp.open "POST", Url & "/" & Method, false
 xmlhttp.setRequestHeader "Content-Type", "application/x-www-form-urlencoded"
 xmlhttp.send Parameters.toString
 response = xmlhttp.responseText
 set xmlhttp = nothing
end function
Private Sub Class_Initialize()
 Set Parameters = new wsParameters
End Sub
Private Sub Class_Terminate()
 Set Parameters = Nothing
End Sub
End class
class wsParameters
public mCol
public function toString()
 dim nItem
 dim buffer
 buffer = ""
 for nItem = 1 to Count
 buffer = buffer & Item(nItem).toString & "&"
 next
 if right(buffer,1)="&" then
 buffer = left(buffer,len(buffer)-1)
 end if
 toString = buffer
end function
public sub Clear
 set mcol = nothing
 Set mCol = CreateObject("Scripting.Dictionary")
end sub
public sub Add(pKey,pValue)
 dim newParameter
 set newParameter = new wsParameter
 newParameter.Key = pKey
 newParameter.Value = pValue
 mCol.Add mCol.count+1, newParameter
 set newParameter = nothing
end sub
public function Item(nKey)
 set Item=mCol.Item(nKey)
end function
public function ExistsXKey(pKey)
 dim nItem
 for nItem = 1 to mcol.count
 if mCol.Item(nItem).key = pKey then
 ExistsXKeyword = true
 exit for
 end if
 next
end function
public sub Remove(nKey)
 mCol.Remove(nKey)
end sub
public function Count()
 Count=mCol.count
end function
Private Sub Class_Initialize()
 Set mCol = CreateObject("Scripting.Dictionary")
End Sub
Private Sub Class_Terminate()
 Set mCol = Nothing
End Sub
end class
class wsParameter
 public Key
 public Value
 public function toString()
 toString = Key & "=" & Value
 end function
end class
Regards, RSingh

Consuming a Web Service with ABAP in WAS 6.40 (SS3)

Hi Everyone,
     Has anyone successfully consumed a web service (based on an EJB) that is published to the J2EE engine of their WAS 6.40 server by creating a proxy from the ABAP layer?
     We are encountering the following problem: When executing method of the proxy to call the Web Service on the J2EE engine, the CX_AI_SYSTEM_FAULT exception is triggered with the message "Unallowed RFC-XML Tag (SOAP_EINVALDOC)".
     This same problem has occurred with multiple web services, even though the proxy generation seems to execute without a problem. Is there some system setting that could cause this? We have run the SOAP Runtime trace, but only receive the same basic information about the problem.
     If anyone has any thoughts at all, I'd be grateful to hear them.
     Thanks,
        --Greg

Hi,
We encountered problems when consuming a foreign WS. It seems to be that RPC style WSDL isn't supported by the WAS 6.4 WS proxy. An interesting reading on this is
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/the difference between rpc and document style wsdl.article
Eddy

Protecting a REST web service with Policy Agent

I have deployed a REST web service in Glassfish using Jersey Annotations. A UI in the same Glassfish instance is protected by a policy agent that forces users through a login page. I would like to protect the REST web service with BASIC Authentication using the same policy agent. Is this possible? Is there supporting documentation?

Hi Daniel,
When you publish a message through Rest, hope your Restful service will receive/process the posted message?
So
YourBizTalk -->(Post Message to)-->RestFulService
From the error message, "the published message could not be routed because no subscribers were found.", it seems like the this Restful service is a
wrapper (or service interface) for BizTalk at client end( where message has been posted thru Rest) and actual posted message is “processed” by BizTalk and the error "" is from BizTalk "after" Rest. This message says the message you posted
through rest is not found subscription at their end.
So
YourBizTalk -->(Post Message to)-->RestFulService -->Clients'BizTalk.
Here problem is at Clients'BizTalk as shown where the posted message to their BizTalk is not processed because no subscription has been found.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Consuming and Providing Web Service with JD Edwards ERP system

Hi,
I would like to create web services with c++ or java OR any other easier way .
I need to use that web services to use in Share point to interact with JD Edwards ERP system .
Pls Note : Since not having license for JD Edwards, I need to create and call from Sharepoint Web service to JD edwards.
and not from JD edwards web service.
Could anybody guide me in this.
Thanks in advance.

I had this error again so I thought I would post my solution:
The issue is SAP needs to know the certificates being used by the web site being called. These certificates are automatically installed in your browser but need to be manually installed in SAP. This is what I did:
How to find/install new certificates
Make sure you run Internet Explorer as an Administrator so you can export the certificates
Go to the web site that SAP is trying to call in Internet Explorer
Double click on the lock in the address bar
View certificates
Find the certificates that are being used
Tools --> Internet Options --> Content --> Certificates
Click on the “Trusted Root Certification Authorities” tab
Find the certificate identified in step iii
Export as a CER certificate
Click on the “Intermediate Certification Authorities” tab
Find the certificate identified in step iii
Export as a CER certificate
Go to STRUST in SAP
Import the Certificates in the “Anonymous” or “Standard” SSL client
Save
RESTART the ICM via t-code SMICM <-- Critical!!!
Test

Multiple Web Services in one Jdeveloper project

Hi all,
I'm currently trying to implement a series of web services, all relating to one application. I'm using the top-down approach, where I generate the web service from a WSDL file, and add my implementation to the generated classes. The WSDL file imports all sorts of XML Schemas (xsd-files) and Jdeveloper correctly generates all the necessary java-classes for me. Lets call the first web service I create WS-1.
This all works fine and I'm a happy panda. I can call the web service, it works, I can modif the wsdl and regenerate the web service to e.g. change the input etc. All this works.
Just until the point where I want to create a second web service (lets call this WS-2). This new web service doesn't use all the XML Schemas that the first web service does, it is more simple with regards to in-/output. The problem arises when I modify WS-2 and Jdeveloper regenerates the Web service files (.java and the files in the WEB-INF/wsdl-directory). When I do this, it deletes the imported xsd-files that WS-1 uses (removes them from WEB-INF/wsdl).
And when I regenerate WS-1 to get my xsd-files in again, then when I regenerate WS-2 it imports all the unnecessary xsd-files into the wsdl for WS-2.
Something tells me, that there is a connection or shared library between all web services in one Jdeveloper project. That they all imports and uses the xsd-files in WEB-INF/wsdl.
Is this true? Can't I have multiple web services (and wsdl-files) using different types (schema definitions) in the the same Jdeveloper project?
One solution I can think of, is to have all my web services in different projects under the same application. But is this really necessary?
I'm using Jdeveloper 10.1.3.3.0.

Hi,
pure from a coder instinct I think I would prefer them to be in separate projects for better reuse and clean separation. If I need project 1 to access aclass from Project 2, I can check the dependency check box in the project properties. Is there any business requirement that makes you think having all of these in a single project will help ?
Frank
Btw.: I agree that JDeveloper shouldn't constraint developers from doing what they want and if this is a limitation the feel free to file a bug

ABAP Web Service with tables

Hello,
 
 
We need to build a web service with a predefined message in our ERP (ABAP), without PI or WebAS JAVA.
 
 
We thought it should be a simple task, because we had no problem with many other applications and systems when building the same service, but were not able to build it with SAP ABAP, probably as a consequence of our lack of knowledge on ABAP SOAP runtime.
 
 
We have an external asynchronous process that delivers information to many other systems using web services (information diffusion). Concecuently, the web service call's structure is determined by the caller, so we have to fulfill this structure if we want to receive the info.
 
 
The owner of the process defined a very simple service call, in which one kind of "record" can be repeated 1 to n times:
 
 
 
 
 
 
<reglasSuscripcion>
 
 <!Zero or more repetitions:>
 
 <nombre>?</nombre>
 
 <valor>?</valor>
 
 <nombre>?</nombre>
 
 <valor>?</valor>
 
 <nombre>?</nombre>
 
 <valor>?</valor>
 
 
 <nombre>?</nombre>
 
 <valor>?</valor>
 
</reglasSuscripcion>
 
 
 
In order to receive this info, we have to implement an abap web service handler to accept this kind of call, the same way other applications/systems have already done.
 
 
We tried to build a RFC function call and create a web service with the wizard and it resulted in a web service with the following WSDL:
 
 
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:sap-com:document:sap:soap:functions:mc-style">
 
 
 
 
 <reglasSuscripcion>
 
 <!Zero or more repetitions:>
 
 <item>
 
 <nombre>?</nombre>
 
 <valor>?</valor>
 
 </item>
 
 
 
 
<item>
 
 <nombre>?</nombre>
 
 <valor>?</valor>
 
 </item>
 
 </reglasSuscripcion>
 
 
 
 
We found two main problems:
 
 
1.- When "wrapping" the RFC as a WS with the wizard, for a table datatype it automatically includes the <item></item> tag, so we break the predefined calling rules.
 
 
2.- The namespace is fixed by the wizard, and we would like to use a common namespace for all the "susbscribers", logically, the namespace fixed by the information diffusion service.
 
 
We also tried to find info on the outside-in approach for building a web service from the WSDL, but all the info we found required the ESR and we have no PI, just the ERP.
 
 
Any ideas on how to proceed?
 
 
Thanks in advance,
 
 
Joseba M. Iturbe
 
 
Edited by: Soporte Desarrollo on Mar 5, 2010 10:56 AM

#2. I've recently had to "zap" some namespaces in an ECC5 system because the calling (TIBCO) system didn't appreciate the default SAP "urn" default - something to do with multiple colons in the address. There were, I think, just three table this affected, all VEP* ones. I think I should have been able to change these via the virtual interface in SE80 except that the ECC5 code was a bit "light" in this respect, so you may be able to do this now in SOAMANAGER in ECC6 (btw, I also had to re-save the WS definition within WSCONFIG and re-activate the virtual interfaces after this "zap" to generated the associated handler class again).
#1. Given your "name / value" pairs represent a complex type, then it might be better practice to have them as "item" which is probably why SAP proposes it this way... what does your custom function module parameter list look like?
Jonathan

Exporting to Microsoft Excel from a DataView Web Part consuming a Web Service with Parameters

In Sharepoint Designer, I've developed a page displaying a DataView Web Part which consumes an XML Web Service with three parameters. These parameters are passed in from a simple Form Web Part containing three input fields. I am able to provide default values for the web service so the dataview is initially populated, and when I enter in new parameters, the web service goes back, grabs the requested data and displays in the dataview nice and slick.
The problem I'm having is this: In Internet Explorer 7, when I right-click on the DataView Web Part and select Export to Microsoft Excel, Excel opens up, says "ExternalData_1: Getting Data..." and returns the data from the web service which applies to the default parameter values each and every time, regardless of whether I have changed the parameters on the web page, and contrary to what the DataView Web Part displays on the screen.
Has anyone else run into this, and is there a solution to the problem?
Best regards,
Mark Christie

Hi Bullish35,
It's possible to provide single export button and export your 4 dataview webparts. Here's the modified code.
<Script Language="Javascript">
function isIE() // Function to Determine IE or Not
return /msie/i.test(navigator.userAgent) && !/opera/i.test(navigator.userAgent);
function exportToExcel() // Function to Export the Table Data to Excel.
var isIEBrowser = isIE();
if(isIEBrowser== false)
alert('Please use Internet Explorer for Excel Export Functionality.');
return false;
else
var strTableID1 = "detailsTable1", strTableID2 = "detailsTable2", strTableID3 = "detailsTable3", strTableID4 = "detailsTable4";
var objExcel = new ActiveXObject("Excel.Application");
var objWorkBook = objExcel.Workbooks.Add;
var objWorkSheet = objWorkBook.Worksheets(1);
var detailsTable = document.getElementById(strTableID1);
var intRowIndexGlobal= 0;
for (var intRowIndex=0;intRowIndex<detailsTable1.rows.length;intRowIndex++)
for (var intColumnIndex=0;intColumnIndex<detailsTable1.rows(intRowIndex).cells.length;intColumnIndex++)
if(intColumnIndex != 3)
objWorkSheet.Cells(intRowIndexGlobal+1,intColumnIndex+1) = detailsTable1.rows(intRowIndex).cells(intColumnIndex).innerText;
intRowIndexGlobal++;
for (var intRowIndex=0;intRowIndex<detailsTable2.rows.length;intRowIndex++)
for (var intColumnIndex=0;intColumnIndex<detailsTable2.rows(intRowIndex).cells.length;intColumnIndex++)
if(intColumnIndex != 3)
objWorkSheet.Cells(intRowIndexGlobal+1,intColumnIndex+1) = detailsTable2.rows(intRowIndex).cells(intColumnIndex).innerText;
intRowIndexGlobal++;
for (var intRowIndex=0;intRowIndex<detailsTable3.rows.length;intRowIndex++)
for (var intColumnIndex=0;intColumnIndex<detailsTable3.rows(intRowIndex).cells.length;intColumnIndex++)
if(intColumnIndex != 3)
objWorkSheet.Cells(intRowIndexGlobal+1,intColumnIndex+1) = detailsTable3.rows(intRowIndex).cells(intColumnIndex).innerText;
intRowIndexGlobal++;
for (var intRowIndex=0;intRowIndex<detailsTable4.rows.length;intRowIndex++)
for (var intColumnIndex=0;intColumnIndex<detailsTable4.rows(intRowIndex).cells.length;intColumnIndex++)
if(intColumnIndex != 3)
objWorkSheet.Cells(intRowIndexGlobal+1,intColumnIndex+1) = detailsTable4.rows(intRowIndex).cells(intColumnIndex).innerText;
intRowIndexGlobal++;
objExcel.Visible = true;
objExcel.UserControl = true;
</Script>
I haven't tested this. But it should work! :)Regards,
Venkatesh R
/* My Code Runs in Visual Studio 2010 */
http://geekswithblogs.net/venkatx5/

OWSM and Webservices -Define policies once for multiple web services

I thought that through using OWSM we had the possibility to use the same Policy Lines for multiple web services.
Mostly when web services are used/integrated within an application, the same rules need to be defined and I thought this requirement could be met when using OWSM.
But you need to define the policy requirements on each web service that's passing through a gateway or agent, why isn't it supported to define policy lines one level higher to be able to use the same requirements for multiple web services?

Nathalie,
For this purpose OWSM allows you to use Template Policy Pipelines.
For individual services, you can than replace the pipeline with the Template.
But I have to agree with you here: the templating functions are rough on the edges, e.g. limited editing capabilities.
Hope this helps.
Best regards, Sjoerd

Web services with controls

hi im trying to create a web service with this VI in the atachment, i tested the add example avaible in NI site and works fine, now i want to build a client that access the vout control, but when i launch this adress http://localhost/tzidws/add/5 the browser doenst show the xml code that i was expecting, it just keep saying waiting for localhost, am i doing samething wrong?
Márcio Ngolo
P.S.- Im using full labview 8.6
Attachments:
TZIDWrite.vi ‏22 KB
information.jpg ‏82 KB
urlmappings.jpg ‏84 KB

helloYann how are u tanks for answer-me, my intensions is to create a webservive using labview and PHP, i created a vi to control a positioner, the vi (tzidwrite.vi) control the positioner openning or closing the positioner, to do that all i did is give a tension value to the input of the positioner using labview and a SCB-68 aquisition board, the values of tension varies from 0v (totally closed) to 10v(totally open), the vi works fine and all system works fine, what i need now is to transform this vi into a web service, i follow the instructions in the help of labview 8.6 and i was expecting to see the XML web page in order to be able to control my positioner just changing the values of the tension in the vi webservice, but i believe im not doing the url mapping the right way, im sending the project files for verification.
Attachments:
TZID.zip ‏230 KB

Launch multiple web services with 1 click

Similar Messages

Maybe you are looking for