Launching SWF file within the project - Video Avatar and Calculator

Hi There, I am somewhat new to Captivate so please bear with me. I am using Captivate 6.0 and have basic coding knowledge. I have a question about how to launch SWF files within my project. There are 2 things I am trying to accomplish.
1. I have a video avatar that I want to use within my project. When a user clicks an icon or button on certain screens I want the appropriate video to launch within the same window. My video is an swf file but it can be another file type if that is better. Is this something that I can accomplish with Captivate 6.0?
2. I have built a basic flash calculator - also an swf file - that I want the user to be able to launch on certain screens. When the user clicks a calculator button, the calculator would launch for the user to use, then the user would be able to close the calculator and return to the screen they were on.
Could someone direct me to some resources on how to accomplish this? If there are any widgets that would make this easier that would be great - but if I need to write some code I can try and do this if someone can direct down the right road. I have spent hours looking for information on this topic but can't find any (at least any that I understand)
Please, and thank you!!!

Rory,
Your Video is 720 x 480 @ 1.212 PAR, according to your screen-cap. In Photoshop (PS), go to Image New (Ctrl+N) and choose the NTSC 720 x 480 Widescreen 16:9 PAR 1.2. Once done, choose Image>PAR and Custiom, change 1.2 to 1.212 (this was a change in PrPro, and might not have yet made it into PS yet). Now, Open your full rez image. Ctrl+A (Select All), Ctrl+C (Copy), and then bring focus to your New Image. Hold Shift and Ctrl+V (Paste). This will put your image on a New Layer, Layer 1, in an Image with the correct dimensions and PAR. You can the Ctrl+T (Free Transform) and adjust the size of your Layer 1 image to suit. Holding down Shift while dragging the Handles of the Bounding Box will constrain the Aspect Ratio. Note, you might be cropping some of that image to fit the Aspect Ratio of your New Image. Anything outside of the Image boundries will effectly be cropped off. Note: you are NOT using the Crop Tool here, but letting the New Image Aspect Ratio effectively do the cropping (note no capitalization) for you. When satisfied with the result, you Delete the Background Layer (not necessary, but I do this to clean things up a bit), and Save_As .PSD to the proper folder.
With Scale to Fit turned OFF, Import_As Footage, this image and drag to the Timeline, making sure that Scale to Fit is OFF. It should be perfect then. Hope that this works for you and gets rid of the problem.
Good luck,
Hunt

Similar Messages

Flash SWF file within Swing JFrame

I was wondering whether its possible to open a Flash swf file within a JFrame
I am looking for a solution similar to the usage of Flash Activex control in .NET
thanks in advance
Vikas

I have read the forum link and other such entries in this forum. I have found the following:
1.) JFlash - a java based flash player. https://jflash.dev.java.net/
Could'nt find the app or the official site
2.) a few projects on sourceforge.org :
java flash bridge where you embed the flash inside an Integrated Browser Component
3.) SWT Flash integration.
I do not find any of these solutions satisfactory.except the SWT/Flash integration which I havent tried.
My question is that isnt there an easier and simpler way to :
Embed Flash into Swing app where actionscript and java can communicate.
I am aware of Remoting and web services. But It is a desktop app I am talking about.
Can anyone suggest anything?
thanks in advance..
from a very frustrated programmer....

Open 2 Web Browser and play a .swf File within each

Hello,
we are trying to implement a Screen Recording Functionality
under Linux.
The Recording will be done by vnc2swf. Then we have a .swf
File with the Video.
Now I want to play Back the recording within a Web Browser.
That's shoudnt be the problem till now. But the difficult
thing is that we have 2 Monitors connected to the Linux PC with
their own display connection, therefore we get 2 .swf File each for
each Screen.
No I want to play back these two .swf Files each in one Web
Browser on each Screen.
Is this possible by programming this with Action Script 2/3 ?
Thanks Richard

When I go here, I can see the slide show fine.
http://www.lvpaiutetribe.com/golf/home_slideshow.swf
What's the url to the problem page?
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"GrayFox32" <[email protected]> wrote in
message
news:g1n9rc$t99$[email protected]..
> I have a swf file that i want to apply to my website, i
have done it
before but
> for some reason it doesnt want to work for this page.
When i open the page
> locally it plays the movie file but when i view my
website online i cant
see
> the flash movie. The file is on my web host server and
its mapped directly
to
> the file but it still doesnt work.
>
> Please Help, Thank You.
>
> <script type="text/javascript">
> AC_FL_RunContent(
>
'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.
cab#
>
version=9,0,28,0','width','612','height','284','title','home_slideshow','src
','h
>
ttp://www.lvpaiutetribe.com/golf/home_slideshow','quality','high','pluginspa
ge',
>
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=Shockw
aveF
> lash','movie','
http://www.lvpaiutetribe.com/golf/home_slideshow'
); //end
AC
> code
> </script><noscript><object
> classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
>
codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.ca
b#ve
> rsion=9,0,28,0" width="612" height="284"
title="home_slideshow">
> <param name="movie"
> value="
http://www.lvpaiutetribe.com/golf/home_slideshow.swf">
> <param name="quality" value="high">
> <embed
> src="
http://www.lvpaiutetribe.com/golf/home_slideshow.swf"
quality="high"
>
pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Ve
rsio
> n=ShockwaveFlash" type="application/x-shockwave-flash"
width="612"
> height="284"></embed>
> </object></noscript>
>

Can I change original source files in the project?

I have a project which has become very disorganized over the last year of editing due to PPs poor ability to effectively share sequences/projects across multiple computers. My assistant editor used a different computer and so the links in the sequences point to multiple "source" files in the project (some in imported folders). However, there is ultimately only one original video clip. The problem is that Premiere Pro won't allow me to delete the nested versions of the source files without also REMOVING the clips in each of the sequences that uses them. For example, the project folder looks like this:
- Original File Folder
-- videoClip-001.mov
- Imported File Folder (imported on one of the many exchanges between editor and assistant editor)
-- videoClip-001.mov
- Sequence version 1 (Uses the second video clip, not the first - although they are ultimately the same video file)
If I delete the Imported File Folder, which only has a mirrored reference to the same video file as in the Original File Folder, then the clip in Sequence Version 1 dissapears. What I expect, rather, is to see a "missing media" message in the sequence so I can reconnect it to the version in the Original File Folder. But I can't. BIG HOLE in Premiere Pro CC.
Why do I want to do this? In a large project with hundreds of video clips, keeping order is very important. With the sequences using multiple "versions" of the same video clip, that order goes down the tubes and it becomes impossible to work.
Thanks for your help.

I don't know of any way to clean up this project, but in the future, don't import the project, just import the sequence. That will not create duplicates.

LabWindows/CVI 2013 SP2 stops working when I try to open a file using the project file menu.

I have windows 7 on my system and sometime late last year I starrted getting a Windows dialog telling me that LabWindows/CVI has stopped working when I try to open a file from the project file menu. I also get an error when I run a project debug mode and use a selectFilePopup in the code. The error says, "The program has suspended execution at address 0x75D5025E. No source line information is available." I've tried removing and reinstalling CVI to no avail. Any suggestions?

Constantin,
Thank you for your response. I've attached screnshots showing the version details for kernal32.dll and ntdll.dll. I also looked at the updates to see which might have been installed when the problem started. Unfortunately there are 15-20 updates every month. I didn't take note of when the error started to occur. At first it only affected my ability to open files from within the project (i.e. file->open->Source, etc). Then I went back to modify a project that had a SelectFilePopup and found that that wouldn't work either.
Attachments:
ntdll.dll version.jpg ‏15 KB

Import wmv file to the project -Premier CS5.5. I got a half screen black!!

Hi I tried to import a wmv file to the project as i do everyday with Premier CS5.5. I got a half screen black!! Is anyone know the reason for that? Thanks!!!

It appears that Microsoft has issued the fixed update:
https://technet.microsoft.com/en-us/security/bulletin/ms13-057
See the "Update FAQ" section:
"Why was this bulletin revised on August 13, 2013?
Microsoft revised this bulletin to rerelease the 2803821 update for Windows 7 and Windows Server 2008 R2.
The rereleased update addresses an application compatibility issue in which WMV encoded video could fail to properly render during playback. Windows 7 and Windows Server 2008 R2 customers should install the rereleased update."

How to view long file names and sort files within folders/projects?

Hello, like so many people here, I am a new mac user, but certainly not computer illiterate. I have been a professional photographer for 10 years and recently change to mac and have been slowly trying to adapt my work flow accordingly.
However I have become increasingly frustrated with Aperture 3 and after reading posts here it looks like I am certainly not the only person. While in my case I am sure it is because of my inexperience with mac systems so any guidance or assistance is much appreciated.
Hopefully my questions are simple. I have been importing my images and re-naming images as I do so. A very simple combination of date, custom name, and counter. However, when I look at the images once the import has completed, they are not in any logical order within the 'project'. I have tried to sort them by file name, orientation, file size, etc, both ascending and descending, but they will not list in the correct order. eg the file '2010-03-09 Lyon France 001', continually falls between '2010-03-09 Lyon France 022' and '....021'.
This has also lead me to a further question. While my file names can generally be read when the image is a landscape format, on the portrait images the file name it too long for me to read the whole name, and I can not find anyway to read the file name, eg browser, split screen, viewer, or full screen.
Im sorry for all the details, and I am sure it is just my lack of experience, so appreciate your help.
PS. On a separate note, I notice on another thread from the frustrated user 'ultratechy' that he got a reply from Tony who stated 'Also after installing any application you should always run disk utility and repair permissions....' Now as I am completely new to mac, I had no idea about this. Any other tips that I should always be aware of? Thanks again.

Thanks for your reply Calx. If it makes you feel better, I am actually a New South Welshman - just living in the sunshine state!
You are correct, I am trying to get my head around a new way of working and thinking, but I suppose it will all become clearer as time goes by. I have re-visited the manual many times, and been doing loads of research online, but just trying to put it all into practice now, so any tips or advice is always appreciated.
At the moment, I am just working with a small part of my library until I do get my head around things before moving onto the bulk of my images. I have my images stored and backed up on multiple external hard drives. I am trying to import my images into aperture from an external drive as I have been slack over the years with keywording, metadata, organising, etc etc, so I figure from what I have read that aperture may assist me with making these time consuming tasks a bit quicker and easier.
I have put a bit of thought into my filing structure, but I am sure that with further use and understanding, this may change in the future, but I hope not. To give you an example of how I am thinking and working - I have used folders for my regular clients, eg, Ray White, and then made another level of folders within 'Ray White' for the date, and then in each 'date folder' I place my projects and name them with the address of the property I have photographed. I select and edit images from each project and place them in albums under each project. Not sure if this is the most perfect structure, but any advice is welcome.
Keywords is always an issue with me. Over the years I have compiled a number of list for each client and each 'type' of photography. For example, real estate images have there own list, I just simply manually add keywords for specific jobs, eg the address and any specific location or features.
Again, advice and guidance always welcome and I would appreciate how you go about these topics? And maybe you can help explain something that I have pre-emted may be a problem, and it may happen when I move onto my larger library, and I am not sure how to explain this as it may show my lack of management previously. When I worked on my PC, I used PS4, Adobe Bridge and Camera RAW pretty much exclusively. For my landscape images for example, I might have 2 or 3 variations of the one images, eg, black and white, sepia, and color for instance. But the file name remained the same, I just stored them in different folders indicating what version of the image was stored there. Now I am thinking that when I import images in Aperture, I will come across difficulties because Aperture will think the I am importing duplicate images because I will in fact have 3 images with the same file name, even though the adjustments I have made to them are different. Is this the case? Will I have to make adjustments again? Will I have to change the name of the files prior to importing? If so, any advice or tips?
Well, I should stop there. Im sorry to bombard you with some much text, but as mentioned, I am new, and finding my feet, so thanks for your time.

Launching swf files with Director

I recently obtained Adobe Director 11.5 to create a menu for launching a series of Flash CS4 files. I worked through Dean Utian’s excellent tutorial and found the following script to program a button to launch another Director file. However, I can’t figure out how to get it to launch a swf file. If someone could tell this poor soul how to get Director to launch swf files I would really appreciate it. Thatch
on mouseUp me
play movie "FileName”
end

I don’t know if anyone else will ever need to do this, but just in case I thought I should share the final protocol we developed. This will embed a Flash SWF file into a Director DIR, so it can be published in a form that can be opened directly, without the multiple clicks required to open an swf with Windows Explorer (or the MAC equivalent). It has been tested with Director 11.5 and Flash CS4. I hope my shorthand is clear. Dean Utian, Sean Wilson and James Newton all helped me with this, and support their support was far above and beyond the call of duty.
1.) Resize the Director stage to match the Flash stage
Click the Director stage > Windows > Property Inspector > Stage Size > 550 x 400
(alternatively you can compose the Flash file with a stage that matches Director’s.   640 x 480 is the default)
2.) Embed the SWF into Director
File > Import > Browse to File > Import
Drag cast member from cast window to stage
ctrlK > distribute horizontal across stage > distribute vertical across stage
3.) Type a pause script into the script channel of the score
on exitFrame
go to the frame
end
4.) Open the movie script window (Ctrl + Shift + U) and type in stretcher script (this allows the SWF cast member to resize if the final window is maximized)
on resizeWindow
aw = _player.activeWindow
awRect = aw.rect
aw.drawRect = awRect.offset(-awRect.left, -awRect.top)
end
on zoomWindow
resizeWindow()
end
5.) Set publication settings
File > Publish Settings > Projector > Shockwave
                                                      > Center stage in monitor
                                     > Shockwave > Allow movie scaling
                                     > Html > Template > Shockwave Default
                                                > Stretch Style > Preserve Proportions
                                                > Stretch Position > Horizontal Align
                                                > Stretch Position > Vertical Align
                                                > Dimensions > Percentage of Browser Window
                                                > Width > 100
                                                > Width > 100
                                     > Formats > Windows Projector (Creates an exe for Windows)
                                                      > Macintosh Projector (Creates an app for MACs)
                                                      > HTML (Creates an htm and dcr for Windows or MACs)
6.)Publish the movie
File > Publish
The Windows Projector will create a single exe file that can be opened by double clicking the icon. If your SWF has addChild script, it will launch a second SWF, but the second SWF must be in the same folder as the exe.
The Macintosh Projector will create an app application that can be opened by double clicking the icon. However this application actually consists of a folder with several subfolders and files. You will not see this with the MAC file directory, but you will if you try to E-mail the application. If your SWF has addChild script, it will launch a second SWF, but the second SWF must be in the same folder as the app.
The HTM Projector will create a htm file and a dcr shockwave file. Both must be in the same folder, and the user must double click the htm icon to open the dcr. If your SWF has addChild script it will not launch a second SWF.

Can I combine two methods of code to load various SWF files into the same location

I presently have a set up where a large SWF file brought on the stage by clicking small icons from the scrollable thumbnail menu on the bottom of the stage. All of it happens at the same frame with .xml loading file.
Here is the code for constructing the ImageLoader(for thumbnails) and SWFLoader for (bigger SWF files)
[CODE]
   function _xmlCompleteHandler(event:LoaderEvent):void {
   _slides = [];
   var xml:XML = event.target.content; //the XMLLoader's "content" is the XML that was loaded.
   var imageList:XMLList = xml.image; //In the XML, we have <image /> nodes with all the info we need.
   //loop through each <image /> node and create a Slide object for each.
   for each (var image:XML in imageList) {
    _slides.push( new Slide(image.@name,
          image.@description,
          new ImageLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/thumbnails/appThmb_imgs/" + image.@name + ".jpg",
               name:image.@name + "Thumb",
               width:_THUMB_WIDTH,
               height:_THUMB_HEIGHT,
               //centerRegistration:true,//messes up the code as places SWFLoader in the upper left corner which is 0,0 coordinates
               //x:260, y:320,//doesn't work here but works in line 69
               scaleMode:"proportionalInside",
               bgColor:0x000000,
               estimatedBytes:13000,
               onFail:_imageFailHandler}),
          new SWFLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/images/" + image.@name + ".swf",
                name:image.@name + "Image",
                width:_IMAGE_WIDTH,
                height:_IMAGE_HEIGHT,
                //centerRegistration:true,//messes up the code as places SWFLoader in the upper left corner which is 0,0 coordinates
                x:0, y:144,
                scaleMode:"proportionalInside",
                bgColor:0x000000,
                estimatedBytes:820000,
                onFail:_imageFailHandler})
[/CODE]
Here is what I would like to resolve. I have another section on the site with an image collage. Every image is a button. I want to script this each image on click to go to the label with ImageLoader and SWFLoader AND TO OPEN A UNIQUE SWF (ASSOCIATED WITH AN IMAGE CLICKED) ON THAT PAGE
Previously this is what I did to achieve it. I would specify a String:
[CODE]
var sourceVar_ProductsPopUps:String;
[/CODE]
and then all my buttons will have their unique SWF assigned for them which opens at another labeled section ("prdctsPopUps" in this example):
[CODE]
function onClickSumix1PopUp(event:MouseEvent):void {
sourceVar_ProductsPopUps="prdcts_popups/sumix1-popup_tl.swf";
gotoAndPlay("prdctsPopUps");
[/CODE]
Then in the "prdctsPopUps" section I would specify that var string to bring up SWF files. The value of sourceVar_ProductsPopUps allows to load mulitple SWFs from the previous page.
[CODE]
loaderProductPopUps = new SWFLoader(sourceVar_ProductsPopUps,
[/CODE]
But I need both of them to be working at the same time. First there is a sectionA from where a user can navigate to specifically targeted SWF to section B's SWFLoader. Then in the section B a user has an option to bring up other SWF files into SWFLoader from the scrollable thumbs menu. Is there a way to combine these two lines into one:
[CODE]
          new SWFLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/images/" + image.@name + ".swf",
[/CODE]
and
[CODE]
new SWFLoader(sourceVar_ProductsPopUps,
[/CODE]

Thanks for looking into my issue.
Unfortunatelly I am not so advanced in AS and do not complitely understand the logic of the problem. I will try to decribe my set up more precise.
So, my main flash file is broken into labeled sections on the main time line.
One of the sections is "Applications" It has an animated collage of images. Each image acts as a button and once clicked brings a user to a section called "ApplicationsPopUps".
"ApplicationsPopUps" section has small image thumbnails scroll menu at the bottom of the screen and a large SWFLoader in the middle of the screen. User can click on an image in the thumbnails scroll menu and a corresponding SWF file will load in the middle of the screen in SWFLoader. User can click on left/right navigation buttons and preceeding/following SWF file will load in SWFLoader.
Everything works fine (with your previous help)
Here is the working code for the ImageLoader and SWFLoader (please let me know if you need additional code on the page):
function _xmlCompleteHandler(event:LoaderEvent):void {        _slides = [];       var xml:XML = event.target.content; //the XMLLoader's "content" is the XML that was loaded.        var imageList:XMLList = xml.image; //In the XML, we have nodes with all the info we need.        //loop through each node and create a Slide object for each.       for each (var image:XML in imageList) {         _slides.push( new Slide(image.@name,               image.@description,               new ImageLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/thumbnails/appThmb_imgs/" + image.@name + ".jpg",               {                    name:image.@name + "Thumb",                    width:_THUMB_WIDTH,                    height:_THUMB_HEIGHT,                    //centerRegistration:true,//messes up the code as places SWFLoader in the upper left corner which is 0,0 coordinates                    //x:260, y:320,//doesn't work here but works in line 69                   scaleMode:"proportionalInside",                    bgColor:0x000000,                    estimatedBytes:13000,                    onFail:_imageFailHandler}),                 new SWFLoader("loadingAssets/appThumbnails/slideshow_image scroller greenSock_mine/assets/images/" + image.@name + ".swf",                   {                     name:image.@name + "Image",                     width:_IMAGE_WIDTH,                     height:_IMAGE_HEIGHT,                     //centerRegistration:true,//messes up the code as places SWFLoader in the upper left corner which is 0,0 coordinates                   x:0, y:144,                     scaleMode:"proportionalInside",                     bgColor:0x000000,                     estimatedBytes:820000,                     onFail:_imageFailHandler})
Thumbnails in the section "ApplicationsPopUps" and images in the image collage in the section "Applications" represent the same photographs. So when a user clicks on one of the images in "Applications" section it would be natural that that image will load in the "ApplicationsPopUps" section. However "ApplicationsPopUps" section presently has a working code (as sampled above) It looks too complex for me and I do not know hot to implement this feature. I do want to keep the functionality of the thumbs image scroller in section "ApplicationsPopUps" as it is now. But I want to add that when a user click on an image from section"Applications" then that particular SWF file will load in SWFLoader in section "ApplicationsPopUps" and then the present functionality can as well be exectuted. Presently it just opens on a first image in xml order.
P.S. I see that you had a download link in your answer. How did you do it? I could also upload a small sample file with my problem. This way you could see all the set up right away.

I have photos that are rotated within a photo stream created from a project even though the photo displays properly within the project. How can I get the photos to have the proper rotation within the photo stream?

I have a photo stream that was created from a subset of photo from a rather large Aperature project. Some of the photos show up rotated within the photo stream but are not rotated within the project. Why is this happening and how do I fix the rotation within the photo stream? I do have the latest version of Aperature and have all of the necessary updates applied to my devices used to view the photo stream. The photos do show up rotated within the photo stream segment of Aperature, so I am sure it is not an issue with the output device (iPad and Apple TV). I do know that I cannot edit photos within a photo stream, but no amount of editing within the project allows the photos to be properly rotated within the photo stream. All help would be greatly appreciated.

That will work, but it is the long way 'round.
As Frank noted, Book Albums are just specialized Albums. Albums can show any Image in your Library, regardless of where the Album is located on the Library Inspector, and regardless of which Project contains the Image. You can put your Albums anywhere (in a Folder called "Books" for example). You can put Images from anywhere in your Library in any Album.
The easy way 'round:
- Make a new Book Album
- Select Images you may want to put in your Book. Flag them.
- Select some more. Flag them.
- Go to the "Flagged" container (listed near the top of the Library Inspector), select all, and drag-and-drop them to your Book Album.
- Repeat as needed, or just drag-and-drop directly into the Book Album.
Note that you can remove any Image from any Album (including Books) by selecting and hitting the "{Delete}" key. This _does not remove the Image from the Project that contains it, or from the Library.
Note, too, that once the Images are in your Book Album, you then put them in the Book you are creating for publication. The Book Album contains the superset of Images with which you populate the Book itself. The Book Album also holds the Book.
A good (imho ) introduction to the parts of Aperture can be found in this short guide I wrote.
The User Manual is helpful. Here is
the chapter on making Books.
From that chapter, here is
the section detailing how to create and populate a Book Album.

How to add class file to the project in netbean

Hi,
I am not sure if it is the right place to put the question. I just cannot find the way to add my existing java class file into the project in net bean.
Anyone can help?
Thanks a lot

Look at the "classpath" entry on the Index tab in NB's Help. There are entries there that explain how to add existing classes and libraries to a project.

Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?

Upon entering a LV project file into VSS, all files in the project are left out. Only the project shell and settings enter VSS. Any idea why?
Solved!
Go to Solution.

Chuck72352,
Hello! It is my understanding that you need to add the individual files to the Source Code Control along with the .lvproj file.
Here is a great deal of information on Source Code Control Practices in LabVIEW.
Ben Sisney
FlexRIO V&V Engineer
National Instruments

I had a windows laptop, and I save files like photos, documents, videos and other things on an external hard drive, and now I want to move those files to the Mac book Pro, and then move those files again to another external hard drive 1T. My question is:

I had a windows laptop, and I save files like photos,documents, videos and other things on an external hard drive, and now I want tomove those files to the Mac book Pro, and then move those files again toanother external hard drive 1T. My question is: Is it possible? Doing this willnot affect the files that I had in windows? No information is lost? or how cani do it?

Connect the external drive to your Mac and drag the files from it to your Mac's internal drive. Then dismount and disconnect the external drive, connect the 1TB external drive, and drag the files from the internal drive onto the external. Nothing will have been deleted from any of the drives up to this point; the files will only have been copied. Verify that the files are readable. There's no reason they shouldn't be; this is just a precaution.
Now if you wish to delete the files from any of the drives, drag them to the Trash, and Empty the Trash while the drive from which they came is still connected. If you disconnect the drive before emptying the Trash, the files you were trying to remove from it won't be deleted. They'll remain in the Trash and continue to take up space on the drive.
Note that if your external drives are in NTFS format, you won't be able to write anything to them or delete anything from them, though you will be able to read and copy the files they contain. The NTFS disk format is read-only to the Mac OS, unless you have a third-party NTFS driver installed. To make your drives cross-platform readable and writable, you must reformat them in the FAT32 or ExFAT format.

Opening SWF Files in the Application window

Hello Everyone,
We have a problem in opening .swf files in our application.
We had quick time movies(.mov) which we used to open and
play inside the application window, using QuickTime Framework APIs
in the code.
Presently we had converted these quicktime movies(.mov) into
.swf files and we are unable to open the same using Quick Time
Framework in MacOSX.
Can you please suggest me as how should I proceed, i.e which
framework should I use in the code to open and play .swf files in
the application window?
It will be better, if you can send me a small sample code to
use in my application for MacOSX.
Awaiting for your kind reply,
Thanking you,
With Best regards,
Anil.

Hi Vaibhav,
I need to display the serarch results in the same window.
I have followed the steps mentioned by you in the thread
<i> Search Results in the Same Window..as we have in SDN</i>
Even after making changes to 2 PAR files mentioned in the above thread, on click
of Search button nothing happens.
It will be great if you can send me your modified PAR files, to identify where i am
going wrong. My mail id is [email protected]
Thanking you,
Vikas

Is it possible to read Prezi files within the iOS app?

Hello,
I want to implement Prezi into my iOS app. I am totally unaware that "Is it possible to read Prezi files within the iOS app?".
If Yes, please provide some tutorial link, so that I can implement into my application.
Thanks & regard.

You will get a better answer in
Developer Forums
Use your Developer credentials to log in there.

Launching SWF file within the project - Video Avatar and Calculator

Similar Messages

Maybe you are looking for