Layers-fixed width and/or embeding in a table

I have been setting up a site and am trying to use one, the
other or both techniques. For a specific design I wanted to use
layers with a fixed width. I assign the width in the properties but
when I enter text it does not wrap, instead the layer expands. Then
I thought I could keep the layer from expanding by embeding it in a
table cell. The layer does not seem to care that it is in a table
cell. The layer expands regardless of anything I have done so far.
Is there anybody that can help with this issue or am I out of
luck?
Thanks in advance.

> I assign the width in the properties but when I enter
text it does not
> wrap
Try adding a space to the text you enter.
> Then I thought I could keep the layer from
> expanding by embeding it in a table cell.
Never put a layer directly into a table cell. You will get
browser
rendering differences when you do this.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"layers" <[email protected]> wrote in
message
news:e9o95u$gv8$[email protected]..
>I have been setting up a site and am trying to use one,
the other or both
> techniques. For a specific design I wanted to use layers
with a fixed
> width.
> I assign the width in the properties but when I enter
text it does not
> wrap,
> instead the layer expands. Then I thought I could keep
the layer from
> expanding by embeding it in a table cell. The layer does
not seem to care
> that
> it is in a table cell. The layer expands regardless of
anything I have
> done so
> far.
>
> Is there anybody that can help with this issue or am I
out of luck?
>
> Thanks in advance.
>

Similar Messages

Switching from delimited to fixed width and had to retype 115 column names

Hi we run 2012 enterprise. I just changed a delimited flat file over to fixed width and had to retype all 115 column names. Is there a way to preserve at least some of what ssis already knows (eg col names) in the flat file connection when
this kind of changeover is occuring?

Thx Mike. I appreciate your help so dont take this the wrong way.
Lets be honest. This kind of behavior and some of the others I've posted recently when it comes to switching in and amongst flat file formats (fixed,unicode,unnecessary data type conversion etc etc) in ssis cannot possibly be by "design".
You might think I'm arrogant but hear me out.  As a graduate from one of the better engineering schools in the US and having earned a BSCS from that school, my thinking is that even a first year college student would design this little part of
ssis in a more flexible fashion. And the sad part is that legacy mainframe technologies from way way back baked this kind of flexibility into their products without add ins.  SSIS is purportedly .net technology and as such should follow the
most fundamental rules of OO which include flexibility and reusability.
We should be more careful about the term "by design". I believe this is actually a limitation which I'm sure would have been dealt with had there been more time, money and experience invested. One of my other posts cites a recommendation (from
ssis) that displays along with one of these flat file errors and has something to do with dt_ntext. But the recommendation actually doesnt work. So are we going to say that a recommendation that doesnt work is also by design? I dont think
so. By design infers "for valid reasons".   And I dont believe there are any valid reasons for this/these behaviors.   If there are , pls share.

Fix width and height of accordion

Hi All
I am building an application using jquery accordion on region 3 of page 0. In each subregion I have a treeview and when a node is choosen shows details about this node. My issue is how to fix width and height of accordion. I tried with jquery tabs instead of accordion and I put this on region header 'style=\"overflow-x:auto;display:block;max-width:340px;min-width:340px;overflow-y:auto;max-height:450px;min-height:450px;";" ', and closing tag at region footer and it worked.
Any idea?
Thanks a lot.
Ricardo
Theme: 13
EPG
Version: 4.0.2.00.06

Hi Jitu
Thank you for your replay but it didn't work as I need.
I made the following test. I put on region attribute \style="width:350px;". When each subregion of accordion has only a treeview, it didn't work. When I created another subregion into accordion with a simple report, it worked fine.
I don't know what is going on and also how to fix it.
Any other idea?
Ricardo

Setting a fixed width and a changing height for a component within a panel

Alright guys here's my next question. I'm now having trouble trying to figure out how to only resize the height of a JTabbedPane yet keep the width fixed. In other words, as the JPanel its in changes in size, I'd like to have the width of my tabbed pane stay a certain value yet let the height of it adjust to the panel's height as it changes. Is there a way to somehow extract the panel's height into a int or something and then when using the setPreferredSize() function simply implement this retrieved value into the function's height parameter? I've tried messing around with Dimensions and getHeight() functions and the sort but to no success. For instance, within the constructor of one of my JFrames using System.out.println(this.getHeight()); prints 0, when of course this is not the case in reality for the frame's height. The panel's changing size is due to the user resizing the window its in. In one of my previous threads in this forum I learned how to use a GridLayout (it was 2 rows and 1 column in size) to keep the height of the top area in a BorderLayout fixed, yet as the user resized the window, the layout would stretch the area width-wise accordingly. However, that was because I had 2 cells in the layout to control, and I know this wouldn't work with only 1. Any ideas?

You still apparently haven't read the tutorial on using Layout Managers to understand the capabilites of each Layout Manager.
For instance, within the constructor of one of my JFrames using
System.out.println(this.getHeight()); prints 0, when of course this is not the case in reality for the frame's heightComponents don't have a size until the GUI is visible on the screen. That is until you've done a pack(), or a setVisible( true ). You should never be using setSize().
Layout Managers use setPreferredSize() ,setMinimumSize() and setMaximumSize() as suggestions for determining the layout. Although most layout managers don't use all the suggestions, which is why you need to read the tutorial to find out how the layout managers work.
I'm now having trouble trying to figure out how to only resize the height
of a JTabbedPane yet keep the width fixedWell, I don't understand the requirement. The preferred size of a tabbed pane is equal to the preferred size of the largest tab added to the tabbed pane. So I don't understand the concept of artificially changing the vertical height.
Anyway reread the tutorial on "How to Use the Border Layout". Two of the 5 areas respect the width of the component but alter the height to fill all the available space.
If you need further help then you need to create a [url http://homepage1.nifty.com/algafield/sscce.html]Short, Self Contained, Compilable and Executable, Example Program that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
And don't forget to use the [url http://forum.java.sun.com/help.jspa?sec=formatting]Code Formatting Tags so the code retains its original formatting.

Prob with fixed column widths and word wrapping in viewer

i have a report where each record has a very long paragraph of text in it.
In desktop and plus, the text column is at a fixed width and the text just wraps nicely according to the column width.
But in Viewer, the column widths do not stay fixed, the text does not wrap, and the long text is displayed in a single line that completely stretches the column width off the page and requires a horizontal scroll bar.
is there anyway to fix the column width in viewer, have the text naturally wrap, and prevent the column stretching. All word wrapping settings are on, but seem to have no effect. I can't seem to find any solution to this.
Thanks...

Hi Pritam,
Per my understanding that you can't see the vertical scrollbar of the ReportViewer controls 2012 to scroll for the grid rows, but can see the vertical scrollbar of the web application, you also can't fix the headers while scrolling, right?
I have tested on my local environment and can't reproduce your issue, but you have an alternative way to add some css to the web form's source code to display the vertical scrollbar.
Details information below for your reference:
Please check below properties setting of the reportviewer which control the visibility of the scrollbar:
AsyncRendering="true"
SizeToReportContent="false"
Please check if this problem also occur on other version of IE and other type of browser.
Please check if you have done correct setting of the Fix data to freeze the table header as the step of below:
http://technet.microsoft.com/en-us/library/bb934257(v=sql.100).aspx
If step1 doesn't work, please click the source of webform.aspx and add below CSS to add the vertical scrollbar manually:
#ReportViewer1 {
overflow-y: scroll;
Run the application you will see it display as below:
Similar thread for your reference:
https://social.msdn.microsoft.com/forums/sqlserver/en-US/f96b3b56-e920-411b-82ea-40467c922e66/reportviewer-control-vertical-scroll-bars
If you still have any problem, please feel free to ask.
Regards
Vicky Liu

How to set a fixed width for a box

Hi there,
Struggling here.... must admit.
I need a solution whereby I can set a fixed width for a box that is grouping two buttons. I suppose generally, I want to know how to set a fixed width for anything element.
See the picture below. I want the two buttons to stay the same distance apart, and I want the grouped buttons to stay the same distance from the right edge of the window, even as a user resizes the window.
This is what happens when you reduce the size of the window .....
I would like to stop this from happening.
I can't figure out how accomplish keeping the parent div a fixed width, and a fixed position from the right side of the window, so the buttons won't overlap.
Perhaps I'm doing the whole thing wrong.
I mean, is there a way to accomplish this without grouping the buttons? That is, make the buttons fixed width, fixed distance apart from each other, and fixed distance from the right side of the window, even as the user resizes the page?
I am trying to accomplish this using the Min/Max width settings, but given that there are so many different units to choose from, and the fact that when I place a button or box on the screen, it seems to be creating that button or box with a percentage-based width, I don't know how many pixels to set it to.... sigh....
Many thanks in advance for your help.
Sam

Okay after much futzing I figured out at least part of the solution I need, but if someone knows of a more efficent way to do this please let me know.
I set a fixed minimum width in pixels for both of the buttons at 156px.
I then made the left button float left and the right button float right.
I then made the parent div for the buttons float right.
That made the buttons stay the same size.
The only thing I need to figure out how to do now is make the parent div stay a consistent distance in pixels from the right. I tried setting a right margin but that didn't work. As you size the window down, the div gets closer to the edge, until it passes it.

Fixed width or 100%

Hi, I've recently got hold of a template which I've
succesfully managed to modify. I have an html page which loads the
falsh movie. Currently it has a fixed width and height and I know
on certain PC's such as laptops, the flash movie doesn't fit on the
page. I know that I'm able to change this to 100% on each. I'm just
wondering if there is any issue with this?
Thanks in advance

Issues are if your setting the width and height to 100%...
- Some screens may be widescreen so your movie will be
stretched differently.
- Having your flash movie stretch beyong initial proportians
can distort non-vector based images. There are ways to make your
flash movie 100% x 100% and specify certain parts within your flash
movie to not scale on resize.

JTable fixed Row and Column in the same window

Hi
Could anyone tip me how to make fixed row and column in the same table(s).
I know how to make column fixed and row, tried to combine them but it didnt look pretty.
Can anyone give me a tip?
Thanks! :)

Got it to work!
heres the kod.. nothing beautiful, didnt clean it up.
* NewClass.java
* Created on den 29 november 2007, 12:51
* To change this template, choose Tools | Template Manager
* and open the template in the editor.
package tablevectortest;
* @author Sockan
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.table.*;
import javax.swing.event.*;
public class FixedRowCol extends JFrame {
Object[][] data;
Object[] column;
JTable fixedTable,table,fixedColTable,fixedTopmodelTable;
private int FIXED_NUM = 16;
public FixedRowCol() {
    super( "Fixed Row Example" );
    data = new Object[][]{
        {      "","A","A","A","",""},
        {      "a","b","","","",""},
        {      "a","","c","","",""},
        {      "","","","d","",""},
        {      "","","","","e",""},
        {      "","","","","","f"},
        {      "","b","","","",""},
        {      "","","c","","",""},
        {      "","","","d","",""},
        {      "","","","","e",""},
        {      "","b","","","",""},
        {      "","","c","","",""},
        {      "","","","d","",""},
        {      "","","","","e",""},
        {      "","","","","","f"},
        {      "I","","W","G","A",""}};
    column = new Object[]{"A","B","C","D","E","F"};
    AbstractTableModel fixedColModel = new AbstractTableModel() {
      public int getColumnCount() {
        return 1;
      public int getRowCount() {
        return data.length;
      public String getColumnName(int col) {
        return (String) column[col];
      public Object getValueAt(int row, int col) {
        return data[row][col];
      public boolean CellEditable(int row, int col) {
        return true;
    AbstractTableModel    model = new AbstractTableModel() {
      public int getColumnCount() { return column.length-2; }
      public int getRowCount() { return data.length - FIXED_NUM; }
      public String getColumnName(int col) {
       return (String)column[col+1];
      public Object getValueAt(int row, int col) {
        return data[row][col+1];
      public void setValueAt(Object obj, int row, int col) {
        data[row][col+1] = obj;
      public boolean CellEditable(int row, int col) {
        return true;
    AbstractTableModel fixedTopModel = new AbstractTableModel() {
      public int getColumnCount() { return 1; }
      public int getRowCount() { return data.length - FIXED_NUM; }
      public String getColumnName(int col) {
       return (String)column[col];
      public Object getValueAt(int row, int col) {
        return data[row][col];
      public void setValueAt(Object obj, int row, int col) {
        data[row][col] = obj;
      public boolean CellEditable(int row, int col) {
        return true;
    AbstractTableModel fixedModel = new AbstractTableModel() {
      public int getColumnCount() { return column.length-2; }
      public int getRowCount() { return FIXED_NUM; }
      public Object getValueAt(int row, int col) {
        return data[row + (data.length - FIXED_NUM)][col+1];
    table = new JTable( model );
    table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
    table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    fixedTable = new JTable( fixedModel );
    fixedTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
    fixedTable.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    fixedColTable= new JTable(fixedColModel);
    fixedColTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
    fixedColTable.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    fixedTopmodelTable = new JTable(fixedTopModel);
    fixedTopmodelTable.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
    fixedTopmodelTable.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
    JScrollPane scroll      = new JScrollPane( table );
     scroll.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
     scroll.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
    JScrollPane fixedScroll = new JScrollPane( fixedTable ) {
      public void setColumnHeaderView(Component view) {}
    fixedScroll.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
    fixedScroll.setHorizontalScrollBarPolicy(JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
    JScrollBar bar = scroll.getVerticalScrollBar();
    JScrollBar dummyBar = new JScrollBar() {
      public void paint(Graphics g) {}
    dummyBar.setPreferredSize(bar.getPreferredSize());
    scroll.setVerticalScrollBar(dummyBar);
    final JScrollBar bar1 = scroll.getHorizontalScrollBar();
    JScrollBar bar2 = fixedScroll.getHorizontalScrollBar();
    bar2.addAdjustmentListener(new AdjustmentListener() {
      public void adjustmentValueChanged(AdjustmentEvent e) {
        bar1.setValue(e.getValue());
    JViewport viewport = new JViewport();
    viewport.setView(fixedColTable);
    viewport.setPreferredSize(fixedColTable.getPreferredSize());
    fixedScroll.setRowHeaderView(viewport);
    fixedScroll.setCorner(JScrollPane.UPPER_LEFT_CORNER, fixedColTable
        .getTableHeader());
    JViewport viewport2 = new JViewport();
    viewport2.setView(fixedTopmodelTable);
    viewport2.setPreferredSize(fixedTopmodelTable.getPreferredSize());
    scroll.setRowHeaderView(viewport2);
    scroll.setCorner(JScrollPane.UPPER_LEFT_CORNER, fixedTopmodelTable
        .getTableHeader());
    scroll.setPreferredSize(new Dimension(600, 19));
    fixedScroll.setPreferredSize(new Dimension(600, 100));
    getContentPane().add(     scroll, BorderLayout.NORTH);
    getContentPane().add(fixedScroll, BorderLayout.CENTER);
public static void main(String[] args) {
    FixedRowCol frame = new FixedRowCol();
    frame.addWindowListener( new WindowAdapter() {
      public void windowClosing( WindowEvent e ) {
        System.exit(0);
    frame.pack();
    frame.setVisible(true);
}

How can i change standard font and fixed-width font in ipad 2?

i need to change standard font and fixed-width font in my ipad 2, but i can not find safari setting menu. it is alower me to change that?

Sorry, the font is not user selectable in Safari on iPad, like it might be on a desktop. You can change the font size, but not the actual font.

Fixed width file outgoing with header,detail and trailer in one map

we have a scenario where in we have to create an output file. the file is fixed width with three different kinds of records namely header, details and trailer. if the specification of the metadata of the file is specified how will we incorporate the creation of the file in one map since the map produces only one call to UTL_FILE and writes it.
there is a work around in a crude way where in we can define the file as a CSV and pass everything in an appanded string in one column. but i wanted to know how we can get the three logical records in one map..
thanks
kamal

The problem is not with generating the records.. i mean header , detail and trailer.
it is how we put them into a fixed width sampled file. if we look at the code generated we will see only one call being made to generate the file.

Finished my composition but it's too big, I need to scale to a fixed height and width - help?

Hi everyone,
This is quite urgent - I've finished my project in Edge Animate, but it is too large and needs to be scaled down. I tried to place it in a separate DIV element in the HTML and scale it down with the CSS but this doesn't work.
I want to scale it from the 1024px wide it currently is down to a fixed width of 800px. Can anyone help me do this? All of the tutorials I have found are to do with making the composition responsive to the user resizing the browser, and this isn't what I need at the moment.
Any help would be greatly appreciated! Thanks!

Can you explain a bit further what you need this for? Are you just trying to center the Stage on your page?
Asking because when writing out this script I ran into some weird browser issues setting the transform origin to the center (IE and FF IIRC). You can give it a shot though by changing the transform origin in the code to:
“transform-origin”:”50% 0″, (for all prefixed instances)
Not guaranteeing results, but you can try
Sarah

[svn] 4793: Fix bug SDK-17734 Path with width and height set different than path data has incorrect bounds

Revision: 4793
Author: [email protected]
Date: 2009-02-02 11:20:06 -0800 (Mon, 02 Feb 2009)
Log Message:
Fix bug SDK-17734 Path with width and height set different than path data has incorrect bounds
Fix: When calculating the bounds position we should take into account the implicit scaling factor actualSize/naturalSize. Also did some refactoring, getting rid of the protected method calculateTopLeft.
QE Notes: None
Doc Notes: None
Bugs: SDK-17734
Reviewer: Ryan
tests: mustella gumbo/layout/GraphicElement
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17734
http://bugs.adobe.com/jira/browse/SDK-17734
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/Ellipse.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/Path.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/graphicsClasses/GraphicElement.a s

Thank you so much for replying.
Yes I have removed and reinstalled WMP.
I had good results with the PD6 application installed on the default path onto the C: drive with the one exception that if the application was launched by accident and the user data path was not available, the PD6 application would blow away my custom user path registry settings. Now that I know what they are I have made a .reg file to repair my registry to my desired user data paths.
Installing the application on the removable drive appeared to help prevent me from launching the application by accident and overwriting my registry with default user paths.
So which is the less of the two evils?
If the application directory is not available, windows media player still tries to launch the .msi for installing PD6.
If I install the application to the C: drive but the user data to the removable drive, launching the PD6 application without the user data drive will still corrupt my registry settings for a user data path.
Both these issues seem like a logical (if not easy) fix that should be done in the PD6 application and installation package. I mean really, cannot anyone tell me why windows media player is checking the PD6 application directory? Why in PD4 did we have an option control for setting the user data path from the PD4 application? Why is this option not in the PD6 application, just the installer?
I am given a choice during installation to move the user data to another non default location. Why else would this be provided if not to accommodate my kind of request to store the user data into an alternate location other than “My Document”. Certainly Palm is not trying to force the users on how to protect and store their personal data?
Post relates to: Centro (Verizon)

[svn:osmf:] 10085: Fixing video width and height getting reset when there' s no true dimensional change reported by 'onMetaData'.

Revision: 10085
Author:   [email protected]
Date:     2009-09-09 07:39:54 -0700 (Wed, 09 Sep 2009)
Log Message:
Fixing video width and height getting reset when there's no true dimensional change reported by 'onMetaData'.
Modified Paths:
    osmf/trunk/framework/MediaFramework/org/openvideoplayer/video/VideoElement.as

hi their i have tried your last code but their is a problem with it on my pc that when i click the send video button it gives the error related to vector,
Vector deviceList = CaptureDeviceManager.getDeviceList()
di = (CaptureDeviceInfo)deviceList.firstElement();
returns zero.
please help my email address is [email protected]
kindly send me an email regarding the solution of my problem. i am using 'creative web cam' over XP windows.

Fix Height and Width - List Mobile

Gotta leave the width and height of each fixed position in the list, without becoming adifferent, I would like to know how to do it. Thank you.

Hi ,
You can suppress the warning message by adding the entry "SuppressIncompatibleBrowserMessage = 1" in "AdobeCaptivate.ini" file .
This file is present in Adobe Captivate installation folder .
Also , add the line of text at line 2 or line 3 of the ini file .
Thanks,
Phani Shekhar M
Example contents of modified "AdobeCaptivate.ini" file :
VistaWin7StartupMessage = 1
SuppressIncompatibleBrowserMessage = 1
LowDiskSpaceMessage = 1
SystemAudioDriver =Soundflower (2ch)
EquationEditorPathWin =\MathMagic for Captivate\MathMagic for Captivate.exe
EquationEditorPathMac =/Applications/MathMagic for Captivate.app
UserPathForLayoutsAndInteractions = ""
[TRUE STRINGS]
USE_INTELLIGENCE = 1
STRINGS = True;Correct;Right;Yes;T;Y;Wahr;Verdadero;Vrai;Vero;○;참;Verdadeiro

Deployment in browser: setting width and height to 100% (or any %)

According to http://docs.oracle.com/javafx/2.0/deployment/deployment_toolkit.htm for deploying a browser embedded JavaFX application, you can set the width and heigth properties to either a fixed value or a percentage value (or, assumedly, any value the browser can accept).
>
width and height
Dimensions used to reserve space for an embedded application. Could be absolute or relative (for example, 50 or 50%). (Required for embed().)
>
However, when I try to set a percentage value (e.g. 100%) from the Netbeans "Run" properties dialog, I get the following exception:
java.lang.NumberFormatException: For input string: "100%"
     at java.lang.NumberFormatException.forInputString(NumberFormatException.java:65)
     at java.lang.Integer.parseInt(Integer.java:492)
     at java.lang.Integer.valueOf(Integer.java:582)
     at com.sun.javafx.tools.ant.DeployFXTask.execute(DeployFXTask.java:103)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)As can be seen, the exception happens in the DeployFXTask.execute method. It seems that this method requires the values to be integers.
So the question, how can I set the embedded application dimensions to a percentage value? (Without having to edit the HTML file manually after the build - which is a workaround.)
Edited by: Knut Arne Vedaa on 21.feb.2012 21:06

As a workaround, in the meantime, look at the build file in the source of the Ensemble sample application (http://www.oracle.com/technetwork/java/javafx/downloads/devpreview-1429449.html) which will patch a generated html file using a custom post processing ant task - this would not work out of the box using the NetBeans generated ant build files though. You could file an issue with NetBeans to ask them to support the workaround in their generated build scripts, but they may just decide to wait until a fix is available in the core platform. As there is a workaround though, I don't think this would be classified as a showstopper issue - just a pretty annoying thing.

Layers-fixed width and/or embeding in a table

Similar Messages

Maybe you are looking for