Layout, spacing and exporting

When I try exporting my work from Adobe Story - let's say I export to a word document - when I open the exported document, the layout is wrong. The spacing is off and I can't seem to set it right. I compared - when I look at my work in Story, there is only ONE space between paragraphs, but when I look at the exported file in Word, there are THREE spaces between paragraphs. What is going on and how can I fix it?
I want to be able to export my work so that it looks the same as it does in Story.

Hi,
Correct me if I am wrong, but I believe what you must be doing is exporting you script to .txt file and then copying the whole thing in word.
Because of different line spacing in the two, this might result in some difference in layout and spacing.
What I would suggest is that instead of copying, open your .txt file in word. (File-> Open-> Type in the name of your .txt file).
Please try this and let us know if this solves your problem. You may also try .pdf export for even better results.
Thanks
Rashi- Story team

Similar Messages

Indesign CS3 text frame parameters and export PDF

could use some help with the following:
I need to edit and export a large number (7000) Indesign documents (one page)
1. check for locked text frames and unlock
2. group all text frames
3. set grouped text frames at x=8 millimeters, y 10 milimeters
4. export the documents to PDF in a subfolder called "Out"
5. save and close the documents in the same subfolder as an Indesign CS3 document (orig is CS2)
This is what I've been trying soo far:
Now only checking one text frame - should be all text frames
"close document 1 saving yes" doesn't work because the originals are from CS2
I get a PDF called "Adobe Indesign SC3"
set processFolder to choose folder with prompt "Choose a folder that contains Innd Docs to process"
tell application "Finder"
if not (exists folder "OUT" of processFolder) then
make new folder at processFolder with properties {name:"OUT"}
end if
set the destination_folder to folder "OUT" of processFolder as alias
end tell
tell application "Finder"
try
set listFiles to (files of contents of processFolder) as alias list
on error
set listFiles to (files of contents of processFolder) as alias as list
end try
repeat with thisFile in listFiles
tell application "Adobe InDesign CS3"
with timeout of 120 seconds
activate
set properties of view preferences to {horizontal measurement units:millimeters, vertical measurement units:millimeters, ruler origin:page origin}
open thisFile
set myDoc to document 1
set docName to name
tell myDoc
set transform reference point of layout window 1 to top left anchor
set myBox to text frame 1 of page 1
set properties of myBox to {locked:false}
move myBox to {8, 10}
end tell
export document 1 format PDF type to (destination_folder as string) & docName & ".pdf" using PDF export preset "[Drukwerkkwaliteit]" without showing options
close document 1 saving yes
tell application "Finder" to move thisFile to destination_folder with replacing
end timeout
end tell
end repeat
end tell
end
end
Any help is greatly appreciated - Doing this manually is a lot of work!!!!!
Peter

You're asking for the name of the application, not the document -- you need to do it after your "tell myDoc". You could also get the name from the alias you open, rather than the open document, something like: repeat with thisFile in listFiles set oldDelims to AppleScript's text item delimiters set AppleScript's text item delimiters to {":"} set docName to text item -1 of (thisFile as Unicode text) set AppleScript's text item delimiters to oldDelims You should also move your "set properties of view preferences" line to after your "tell myDoc". -- Shane Stanley <[email protected]>

Convert pdf files into wiki pages, and export wiki pages as word and pdf files

I am working on an enterprise wiki site collection inside my SharePoint server 2013. And there was a requirement to automatically generate wiki pages from word documents. As I read that the built-in service within SharePoint does not support importing the
pictures within the word documents. So I looked into 3rd party tools and I settle on the “Kaboodle Word to Wiki” link
which will manage to convert word docs into wiki pages, with only minor layout problems.
But I want to know if there are additional tools which support the following:-
Converting pdf files to SharePoint wiki pages.
Exporting SharePoint wiki pages into pdf and word documents?
Regards

I haven't seen any third party tool converting pdf files to SharePoint wiki pages and and exporting SharePoint wiki pages into pdf and word files.
You need to write custom feature where you can use iTextSharp pdf for pdf conversion. you can also check below blog which shows the export of SharePoint Wiki to Word/PDF without 3rd party tools:
http://blogs.msdn.com/b/thomsven/archive/2011/09/09/export-sharepoint-wiki-to-word-pdf-without-3rd-party-tools.aspx
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.
the link you posted is a manual process for converting wiki to pdf ,, i was looking for a tool which allow converting wiki to pdf ?

ABAP program to take input parameter from variant, execute KSB1 and export

Hi Friends,
My client asking change request in CO
The Change request is "ABAP program to take input parameter from variant, execute KSB1 and export the output into an excel sheet and park the document in a designated location"
Pls let me know actually i am a FICO consultant what i can do in this change request
Thanks,
Santi

Hi
First I dont you would need to create a ABAP to generate the report in Excel.
You can look at this option. Execute the report Go to->Change Layout, Click on the view option, On the Preferred View Select Microsoft Excel, Save the layout, provide a layout name with /XYZ.
Now when you want to execute KSB1 with excel, just execute KSB1 with /XYZ layout, it would open in Excel, export to which ever location you want.
Or just simply save the report as Excel using the Excel button on the tool bar.
Regards,
Suraj

Apply formatting in a JEditorPane and export the content in HTML.

Hi,
I'm writing, a program to allow the user to enter a formated text and even add images in a JEditorPane.
Here is a simple sample of the code:
import javax.swing.*;
import javax.swing.text.*;
import java.awt.*; //for layout managers and more
import java.awt.event.*; //for action events
import java.net.URL;
import java.io.IOException;
public class EditorPane extends JPanel{
 private String newline = "\n";
 private JPanel buttonPanel;
 private JPanel textPanePanel;
 private JEditorPane myEditorPane;
 private JButton boldButton;
 private JButton colorButton;
 private JButton imgButton;
 private JButton saveButton;
 public EditorPane() {
 createGUI();
 private void createGUI() {
 buttonPanel = new JPanel();
 boldButton = new JButton("Bold");
 boldButton.addActionListener(new java.awt.event.ActionListener() {
 public void actionPerformed(java.awt.event.ActionEvent evt) {
 boldButtonActionPerformed(evt);
 colorButton = new JButton("Color");
 colorButton.addActionListener(new java.awt.event.ActionListener() {
 public void actionPerformed(java.awt.event.ActionEvent evt) {
 colorButtonActionPerformed(evt);
 imgButton = new JButton("Image");
 imgButton.addActionListener(new java.awt.event.ActionListener() {
 public void actionPerformed(java.awt.event.ActionEvent evt) {
 imgButtonActionPerformed(evt);
 saveButton = new JButton("Save");
 saveButton.addActionListener(new java.awt.event.ActionListener() {
 public void actionPerformed(java.awt.event.ActionEvent evt) {
 saveButtonActionPerformed(evt);
 buttonPanel.setLayout(new GridLayout(1, 4));
 buttonPanel.add(boldButton);
 buttonPanel.add(colorButton);
 buttonPanel.add(imgButton);
 buttonPanel.add(saveButton);
 textPanePanel = new JPanel();
 textPanePanel.setLayout(new BorderLayout());
 myEditorPane = this.createEditorPane();
 JScrollPane paneScrollPane = new JScrollPane(myEditorPane);
 textPanePanel.add(paneScrollPane, BorderLayout.CENTER);
 this.setLayout(new BorderLayout());
 this.add(buttonPanel, BorderLayout.NORTH);
 this.add(textPanePanel, BorderLayout.CENTER);
 public static void main(String[] args) {
 javax.swing.SwingUtilities.invokeLater(new Runnable() {
 public void run() {
 JFrame frame = new JFrame("TextSamplerDemo");
 frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
 EditorPane newContentPane = new EditorPane();
 //newContentPane.setOpaque(true); //content panes must be opaque
 frame.setContentPane(newContentPane);
 frame.pack();
 frame.setSize(300,300);
 frame.setVisible(true);
private JEditorPane createEditorPane() {
 JEditorPane editorPane = new JEditorPane();
 editorPane.setEditable(true);
 java.net.URL helpURL = TextSamplerDemo.class.getResource(
 "simpleHTMLPage.html");
 if (helpURL != null) {
 try {
 editorPane.setPage(helpURL);
 } catch (IOException e) {
 System.err.println("Attempted to read a bad URL: " + helpURL);
 } else {
 System.err.println("Couldn't find file: simpleHTMLPage.html");
 return editorPane;
 private void boldButtonActionPerformed(java.awt.event.ActionEvent evt) {
 System.out.println("boldButtonNextActionPerformed");
 //myEditorPane
 // TODO add your handling code here:
 private void colorButtonActionPerformed(java.awt.event.ActionEvent evt) {
 System.out.println("colorButtonActionPerformed");
 // TODO add your handling code here:
 private void imgButtonActionPerformed(java.awt.event.ActionEvent evt) {
 System.out.println("imgButtonActionPerformed");
 // TODO add your handling code here:
 private void saveButtonActionPerformed(java.awt.event.ActionEvent evt) {
 System.out.println("saveButtonActionPerformed");
 String newStr = new String("this is the new String");
 //newStr.setFont(new java.awt.Font("Tahoma", 0, 14));
 this.myEditorPane.replaceSelection("sdfsdfsd");
 // TODO add your handling code here:
}and the HTML Code of simpleHTMLPage.html is
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<title>Untitled Document</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>
<body>
Simple text
Bold text
Italic text
Center text
Color text
image here : <img src="images/Pig.gif" width="121" height="129">
 
</body>
</html>By pressing the Save button I can change the selected text.
I don�t know the way to get and apply the format (size, color �) to only the selected text and display the selected image in real time in the EditorPane. Like if you press the Bold button, the selected text font will be change to bold.
I would like to get or save the HTML code of the content of the EditorPane by pressing the Save button, How to make it?
I can apply the formatting on the selected text in a JTextPane, but I don't know the way to save or export the content in HTML. By doing that it could fix my problem too.
So any help to do that will be much appreciated.
Thanks.

Hi,
Tks for your answer. That one I can do it. I would like to display the selected text in bold instead of adding the tag in the JEditorPane. If I get you right, you get the hole content of the JEditorPane and save it. How did you get it ? And before saving that in the database, did you fing the keysWord to convert the HTML tag in the corresponding entities ?
Bellow you have a sample of code to make the formatting in the JTextPane.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.text.*;
import javax.swing.text.Highlighter;
import javax.swing.event.*;
import java.util.*;
import javax.swing.text.*;
import javax.swing.text.BadLocationException;
public class MonJTextPane extends JFrame implements CaretListener, ActionListener
 * Attributs :
 private JTextPane monTextPane;
 private JLabel monLabel;
 private JButton monBouton;
 private StyleAide style; // class qui defini les effets de style de l'editeur
 * Constructeur :
 public MonJTextPane ()
 { super ("Aide");
 // construction du composant Texte
 this.style = new StyleAide (new StyleContext ());
 this.monTextPane = new JTextPane ();
 this.monTextPane.setDocument (style);
 this.monTextPane.addCaretListener (this);
 // construction de la fenetre :
 this.getContentPane ().setLayout (new BorderLayout ());
 this.setBounds (150,150,600,550);
 this.setDefaultCloseOperation (JFrame.EXIT_ON_CLOSE);
 this.monLabel = new JLabel ("Auncune ligne saisie...");
 this.monBouton = new JButton ("change de style");
 this.monBouton.addActionListener (this);
 JPanel panel = new JPanel ();
 panel.setLayout (new GridLayout (1,2));
 panel.add (monLabel);
 panel.add (monBouton);
 this.getContentPane ().add (panel, BorderLayout.SOUTH);
 this.getContentPane ().add (this.monTextPane, BorderLayout.CENTER);
 this.setVisible (true);
 * Methodes :
 private int getCurrentLigne ()
 { return ( this.style.getNumLigne (monTextPane.getCaretPosition ())+1 );
 public int getCurrentColonne ()
 { return ( this.style.getNumColonne (monTextPane.getCaretPosition ())+1 );
 * Methodes CaretListener:
 // ecoute les deplacements du curseur d'insertion
 public void caretUpdate(CaretEvent e)
 { int debut = java.lang.Math.min (e.getDot (), e.getMark ());
 int fin = java.lang.Math.max (e.getDot (), e.getMark ());
 this.monLabel.setText ("Ligne numero : "+ this.getCurrentLigne ()+" Colonne : "+this.getCurrentColonne ()+" (debut : "+debut+", fin : "+fin+")");
 * Methodes ActionListener:
 public void actionPerformed (ActionEvent e)
 { int start = monTextPane.getSelectionStart();
 int end = monTextPane.getSelectionEnd();
 int debut = java.lang.Math.min (start, end);
 int fin = java.lang.Math.max (start, end);
 int longueur= fin - debut;
 this.style.changeStyleSurligne (debut, longueur);
 // lance le tout ....
 public static void main (String argv [])
 { new MonJTextPane ();
// la Classe DefaultStyledDocument correspond a la classe utilise comme Model pour les
// composant Texte evolue comme : JTextPane ou JEditorPane
// en derivant de cette derniere nous pouvons donc redefinir les methodes d'insertion afin de personnalise
// le style d'ecriture en fonction du texte et creer une methode permettant de modifier le style utilise pour
// une partie de texte deja ecrite.
class StyleAide extends DefaultStyledDocument
 * Constructeur :
 public StyleAide (StyleContext styles)
 { super (styles);
 initStyle (styles);
 * Methodes :
 // redefini pour choisir l'effet de style a utiliser
 public void insertString(int offs, String str, AttributeSet a) throws BadLocationException
 { try
 { // si le texte insere est egale a HELP le texte s'ecrit avec le style "styleOp"
 if ( str.equals ("HELP") )
 { super.insertString (offs, str, getStyle ("styleOp"));
 else // sinon le texte est ecrit avec le style "styleNormal"
 { super.insertString (offs, str, getStyle ("styleNormal"));
 catch (BadLocationException e)
 { System.out.println ("Tuuuttt erreur Insere");
 // modifie le style d'ecriture d'un texte deja ecrit compris
 public void changeStyleSurligne (int positionDepart, int longueur)
 { setCharacterAttributes (positionDepart, longueur, getStyle ("styleKeyWord"), true);
 // le Model d'un composant texte est enregistre sous form d'un arbre
 // cette methode permet de recuperer le noeud root de l'arbre
 private Element getRootElement ()
 { return this.getDefaultRootElement ();
 // methode permettant d'obtenir la ligne correspondant a un offset donnee
 public int getNumLigne (int offset)
 { Element eltR = getRootElement ();
 int numLigne = eltR.getElementIndex (offset);
 Element elt = eltR.getElement (numLigne);
 if ( offset != elt.getEndOffset () )
 { return numLigne;
 else
 { if ( numLigne != 0 )
 { return numLigne+1;
 return 0;
 public int getNumColonne (int offset)
 { Element eltR = getRootElement ();
 Element elt = eltR.getElement (eltR.getElementIndex (offset));
 int numColonne = offset-elt.getStartOffset ();
 return numColonne;
 // Defini les differents styles
 private static void initStyle (StyleContext styles)
 { // definition du style pour le texte normal (brute)
 javax.swing.text.Style defaut = styles.getStyle (StyleContext.DEFAULT_STYLE);
 javax.swing.text.Style styleNormal = styles.addStyle("styleNormal", defaut);
 StyleConstants.setFontFamily (styleNormal, "Courier");
 StyleConstants.setFontSize (styleNormal, 11);
 StyleConstants.setForeground(styleNormal, Color.black);
 javax.swing.text.Style tmp = styles.addStyle("styleKeyWord", styleNormal);
 // Ajout de la couleur blue et du style gras pour les mots cle
 StyleConstants.setForeground(tmp, Color.blue);
 StyleConstants.setBold(tmp, true);
 tmp = styles.addStyle("styleOp", styleNormal);
 // Ajout de la couleur rouge pour le style des operateurs
 StyleConstants.setForeground(tmp, Color.red);
}But it hard for me to convert it in the corresponding HTML document.
Did you have and idea
Tkks

When I design with Muse and export as HTML Dreamweaver doesn't attach the style sheets. Any answers?

When I design with Muse and export as HTML Dreamweaver doesn't attach the style sheets when I open the files with Dreamweaver. Essentially when I design with Muse the files don't render the same with Dreamweaver. Is this a bug? Any work arounds?

Then you will have to install a local server and use live view. It's not that DW isn't rendering it or isn't attaching it, it's that Muse decided to use server-side processing to include it which is ok for a CMS practice when you are combining stylesheets for better caching, but it really isn't ideal for a single style sheet. This is a shortcoming of Muse and one of the reasons many professionals don't back the product at the moment. That and you can't actually buy Muse, so unless you are on a subscription you don't have it. It's trying to fill a void for those who don't want to invest in the professional design tools like Fireworks or Photoshop or Dreamweaver, but want a cross between them to make designs. If you have invested in the subscription though and want a better way to make layouts I highly recommend coding it yourself and using Fireworks or Photoshop to do the layout for you. There is an excellent tutorial on the devnet (3 parts) to show you how its done ( http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html ). Once you start using Fireworks or Photoshop you will realize just how limited Muse is in design.

Splitting of text fields when using multiple fonts within a text field and exporting it to XFL.

Hi All,
I have been trying out InDesign and exported files to XFL for use in Flash. If I use a single font for a text box then everything looks fine in flash, but if I use multiple fonts for the same text box its split into multiple text boxes. For making this more clear I have attached an image.
Any help to resolve this!!!

Paragraph styles are tied to the paragraph, not the page.
You don't say which version you are using, but here's something you could try in CS3 or CS4. Set up a baseline grid in the preferences to match the main pages. The spacing should match the leading of the body text. Make a special paragraph style (you can base it on the body text style) that you will apply to text onthe chapter start page, and as part of that style set it to align to baseline grid. Now for the trick. Select the text frame onthe start page and define a custom baseline grid with the spacing you want. Save it as an object style, too, while you're at it. The strating text should align to the custom grid on the start page and the documetn grid on the next page.
Peter

Aspect Ratio Sort and Export (File Naming)

When I crop my photos, I sometimes find that some photos work best in the 4x5/8x10 crop and others in a 2x3/4x6 aspect ratio.
Issue #1) How can I sort and find all of my images with a specific aspect ratio?
When in the Library module and setting up a filter (ctrl+f), I don't see any way to filter and sort out my aspect ratio. In the "Metadata - Label" filter fields, there is an "Aspect Ratio" value however the only options are Portrait and Landscape. (more of a photo/page layout than 'aspect ratio' to me)
** Feature Request: Please add "Aspect Ratio" options (just as presented with "r" is pressed for resize) in the Library Filter Metadata. **
Issue #2) How can I include the aspect ratio of the image (e.g. 4x5) in the exported file name?
I don't see any way to to do this either, so I have to manually find all of the images with the same aspect ratio first, then set a Custom Name field for export and export each ratio at a time.
** Feature Request: Please add "Aspect Ratio" options to the file naming fields available for selection when exporting images. Values like "4x5" and "4x6" would be great to be able to include in the filename of my images.
Regards,
Brian

Thank you John! I've found and posted them here:
http://feedback.photoshop.com/photoshop_family/topics/sorting_by_aspect_ratio
http://feedback.photoshop.com/photoshop_family/topics/need_aspect_ratio_field_for_filename _export

Capture and Export of Mono Audio in FCP HD

I have just upgraded to FCP HD from FCP 3. My problem is all of my audio needs to be Mono only. In v3 this was simple I just chose Mono from the capture settings and Mono for Export.
On FCP HD I can't find any way to capture and export as Mono. When I record Voice Over in FCP all I get is the right channel and even when I set it to pan centre it still only comes out the right speaker after export.
If I've got to manually duplicate tracks everytime it will take me forever.
Anybody know a simple way to capture and export Mono only (the same for both Ch 1 + 2)
G4 DP 1.25 Mac OS X (10.4.6)

This might seem the long way 'round but it may save a ton of time in the end.
Do your FCP mix in stereo as Colin suggests, then take the final audio track into STP or Peak and do a "mix to mono" and then save a new AIFF file with the resulting mono clip.
Then bring that back into FCP on a new audio track, line it up with the stereo, then either disable or delete the stereo tracks. This will give you a true mono audio track.
But where are you going with this content that will handle mono audio? DVDs require a stereo AC3 files. Are you sure you really need a mono sound track?

Urgent help needed!! Layout table and Draw layout cell dissapeared.

I need some urgent help. I'm using CS3 but for a while my
Layout Table and Draw Layout Cell icons appear greyed and can't use
them at all. Is there any kind soul out there who knows how to fix
this? I'm going nuts trying all the possible options but none seem
to work.
Help please!!!!!!

> How would you about designing a page without using html?
You don't. But I don't recall suggesting that you not use
HTML. I just
suggested that you use best-practice HTML, no? Or maybe you
meant to ask
how you would go about building your site without learning
HTML? In that
case, I think you are outta luck. Using DW without knowing
HTML is a very
punishing experience, I'm afraid.
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
I'd prefer Cristal, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Untersberg" <[email protected]> wrote in
message
news:g4tj9a$m5o$[email protected]..
> Ahhhhhh!!!!! They came up!!!! They came up again!!
> I was on standard mode. Now going back to your
suggestion, which I really
> appreciate. How would you about designing a page without
using html? I'm
> just
> redesigning my website at the moment and need it to get
going urgently,
> hence
> the reluctance to start learning HTML at the moment.
I'll do after but I
> need
> to get this up and running fairly quickly.
>
> Cheers.
>
> PS: A virtual box of 12 bottles of Moet Chandon is
already on your way!!
>

Importing and Exporting Data with a Clob datatype with HTML DB

I would like to know what to do and what to be aware of when Importing and Exporting data with a Clob Datatype with HTML DB?

Colin - what kind of import/export operation would that be, which pages are you referring to?
Scott

Using Powershell Script Run simple query in MS Access 2007 and export the results of query to Excel

Hi Experts,
I have a Access 2007 DB file and 2 Big tables inside that (bigger than the size that can be easily handled by MS Excel 2007).
My requirement is automate using powershell scripts the below things.
1. Create a SQL query in Access DB and save that in access DB
2. Run the saved query and export the result in excel sheet where I can create the charts and Pivots. Thanks in advance
Prajesh

Do you have to use the Access query, couldn't you just recreate the query in Powershell? Here's a link with good info that references an existing script for querying an Access database:
http://blogs.technet.com/b/heyscriptingguy/archive/2009/08/13/hey-scripting-guy-can-i-query-a-microsoft-access-database-with-a-windows-powershell-script.aspx
Once you have your dataset you can pipe it to
Export-Csv -NoType c:\pathtofile\output.csv

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

Problem with Import and Export Data Wizard

Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
to use.
After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
How can I correct this problem?

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

How can I digitalize a document text in PDF and export it to WORD?

Anthony
How can I digitalize a document text in PDF and export it to WORD?

If you already have a PDF document, ExportPDF can help you with this task. https://www.acrobat.com/exportpdf/en/convert-pdf-to-word.html
On the other hand, if you have a physical document, you'll need to scan it into a PDF document first.
Depending on what you need to do you may require different tools & services, so please help us out with more details.
Vlad

Layout, spacing and exporting

Similar Messages

Maybe you are looking for