Ld segmentation fault generating output file
I have a fairly large executable that is being compiled on Solaris 8 with gcc 3.2.3 configured with the Solaris 64 bit ld. ld is failing with a segmentation fault during the output file generation phase.
A stack track of ld at the time of the seg fault look like the following:
update_osym
update_outfile
ld_main
main
One of the registers referenced in the affending assembly instruction is suspiciously close
to 64K.
The .o's have been compiled with the -g option which generates quite a bit of debug information.
Has anyone seen this problem and is there any workaround other than not compiling with -g ?
A few (sort of obvious) things to check:
1) Are you running the latest linker patch? It seems to be updated fairly often. For solaris 8, the current revision is 109147-26
2) Are you invoking ld directly, or letting gcc invoke it for you? In general it is much better to let the compiler binary drive ld.
Similar Messages
-
Customized Seeded report to XMLP report but its not generating output file?
I want to customize "Dunning Letter Print from Dunning Letter Generate" Report, which is called from "Dunning Letter Generate" Report
Steps i followed to Customize reports are.
1. Changed output format to xml for "Dunning Letter Print from Dunning Letter Generate" Report.
2. Ran report to generate xml data and using xml data created RTF file
3. Registered data definition and template with code and short name same which is ARDLP_NON_SRS
Now while i am running report its completing normal, but its not generating output file giving Error like –
"Unable to find Published Output for this request"
“No Output File Exist for Request No - xxxxx”
No Idea why its not picking template, Can anyone help me in this?
Using:
Oracle Applications : 10.0.5.2,
MS Word 2007
Thanks,I am not giving the solution, providing you a hint..
This is the query you need to satisfy,
SELECT NVL(R.DESCRIPTION ,CP.USER_CONCURRENT_PROGRAM_NAME)
FROM FND_CONCURRENT_REQUESTS R, FND_CONCURRENT_PROGRAMS_VL CP,XDO_DS_DEFINITIONS_B XDS
WHERE ( ( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'U'
AND R.REQUESTED_BY = :$PROFILES$.USER_ID ) or
( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'R'
AND R.RESPONSIBILITY_ID = :$PROFILES$.RESP_ID ) )
AND R.PROGRAM_APPLICATION_ID = CP.APPLICATION_ID
AND R.CONCURRENT_PROGRAM_ID = CP.CONCURRENT_PROGRAM_ID
AND XDS.APPLICATION_SHORT_NAME=
( SELECT APPLICATION_SHORT_NAME
FROM FND_APPLICATION
WHERE APPLICATION_ID=CP.APPLICATION_ID)
AND XDS.DATA_SOURCE_CODE = CP.CONCURRENT_PROGRAM_NAME
AND R.OUTPUT_FILE_TYPE='XML'
AND R.STATUS_CODE not in ('E', 'D', 'T', 'X')
ORDER BY R.REQUEST_ID DESC
Go to system profiles and query for 'Concurrent:Report Access Level', responsibility you need and modify the profile name accordingly.... -
In RoboHelp 11 Responsive HTML5, is it possible to have 2 different language outputs in one generated output file, similar to WebHelp where the use can select the language from a drop-down list? In Webhelp output you could create multiple Content categories. Is there something similar with the responsive output, or am I forced to have a completely separate set of output files for each language (for example, English, Japanese, Chinese, Korean, and Arabic)?
As Rick, mentions, there's no default way.
Having said that, there's nothing stopping you from doing it yourself. You can add a kind of language selector to the layout and set that for every html5 output. With some JavaScript, you can have the user switch between your outputs. It would look like content categories, but you'll have build it yourself. -
ALV Grid to be run in background & to generate output file in Excel format
I use REUSE_ALV_GRID_DISPLAY in my program for the ALV output
My Requirement is Program to be run in a background since it is getting timed out when executed in foreground and also to generate the output file in Excel format. And we are using 4.6 C version.
how do i attain this?Hello,
One alternate solution can be :
Execute your report in background and then send the data to Spool .
From this spool , you can download the data in excel file.
SUBMIT xyz TO SAP-SPOOL
SPOOL PARAMETERS gt_print_parameters.
Regards,
Sandeep -
How to generate output file of a certain report in a specified directory
Hello everyone,
I wanna know how to generate the output file of a certain report in a specified directory.
Now, the output file directory = /produits/OA/OAS/production/prodcomn/admin/out/PROD_us15k1bp/
I wanna to generate the output file of a report in this directory
/produits/OA/OAS/production/prodcomn/admin/out/PROD_us15k1bp/FACTCLIENT
Cause the output of this report is very large, so I don't wanna to put it in the output drectory standard which reduce the performance.
Could you help me?
Thanks a lot,
KinkichinHi,
I wanna know how to generate the output file of a certain report in a specified directory.See (Note: 158088.1 - Is Possible to Redirect the Concurrent Processes Output to a Specific Directory for a Specific Responsibility?).
Cause the output of this report is very large, so I don't wanna to put it in the output drectory standard which reduce the performance.There should be no performance issues you place the output file in the same directory where other concurrent request output files are located.
Regards,
Hussein -
Process with RenderPDFForm using Java API not generating output file
I have a short-lived process that renders a PDF/HTML form based on input parameters. It also takes a .xdp file as input. This works just fine from with
in Workbench (9.0). I have created a Java client to invoke this process. When I invoke the process from the Java Client,
it is not creating the output file. When I look at the invocation response, I see the output parameter (output file) name, but it is null.
Here is my code.
Properties connectionProps =
new Properties();
connectionProps.setProperty(
"DSC_DEFAULT_SOAP_ENDPOINT", "http://hostname:8080");connectionProps.setProperty(
"DSC_TRANSPORT_PROTOCOL","SOAP");
connectionProps.setProperty(
"DSC_SERVER_TYPE", "JBoss");
connectionProps.setProperty(
"DSC_CREDENTIAL_USERNAME", "username");
connectionProps.setProperty(
"DSC_CREDENTIAL_PASSWORD", "password");
//Create a ServiceClientFactory object
ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
//Create a ServiceClient object
ServiceClient myServiceClient = myFactory.getServiceClient();
//Create a Map object to store the parameter value
Map params =
new HashMap();
File file =new File("C:/test1/test.xdp");File ofile =
new File("C:/TestProcess.pdf");
//String formName = "RD410-4.xdp";
InputStream inFile =new FileInputStream(file);OutputStream oFileStream =
new FileOutputStream(ofile);
byte[] cData = "".getBytes();
Document inputData =
new Document(inFile);
// Document outputData = new Document(oFileStream);
inputData.passivate();
params.put("Form", inputData);params.put(
"FormId", "12");params.put(
"RevId", "12");params.put(
"OutputType", "PDF");params.put(
"targetSubmission", "http://localhost:8090/LCWebProject/HandleData");params.put(
"param1",1);
InvocationRequest invokeRequest = myFactory.createInvocationRequest(
"MyApplication10/Processes/RenderForm", //Specify the short-lived process name
"invoke", //Specify the operation name
params,
//Specify input values
true); //Create a synchronous request
InvocationResponse invokeresponse = myServiceClient.invoke(invokeRequest);
Document encryptDoc = (Document) invokeresponse.getOutputParameter("outputFile");
//Save the encrypted PDF document returned by the process
//Save the password-encrypted PDF document
File outFile =new File("C:\\test1.pdf");encryptDoc.copyToFile (outFile);
I see the output parameter "outputFile" in the invokeresponse object. But it is null.
Can anyone guide me in the right direction ?
Thanks,
JyothiI am not giving the solution, providing you a hint..
This is the query you need to satisfy,
SELECT NVL(R.DESCRIPTION ,CP.USER_CONCURRENT_PROGRAM_NAME)
FROM FND_CONCURRENT_REQUESTS R, FND_CONCURRENT_PROGRAMS_VL CP,XDO_DS_DEFINITIONS_B XDS
WHERE ( ( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'U'
AND R.REQUESTED_BY = :$PROFILES$.USER_ID ) or
( FND_PROFILE.VALUE('CONC_REPORT_ACCESS_LEVEL') = 'R'
AND R.RESPONSIBILITY_ID = :$PROFILES$.RESP_ID ) )
AND R.PROGRAM_APPLICATION_ID = CP.APPLICATION_ID
AND R.CONCURRENT_PROGRAM_ID = CP.CONCURRENT_PROGRAM_ID
AND XDS.APPLICATION_SHORT_NAME=
( SELECT APPLICATION_SHORT_NAME
FROM FND_APPLICATION
WHERE APPLICATION_ID=CP.APPLICATION_ID)
AND XDS.DATA_SOURCE_CODE = CP.CONCURRENT_PROGRAM_NAME
AND R.OUTPUT_FILE_TYPE='XML'
AND R.STATUS_CODE not in ('E', 'D', 'T', 'X')
ORDER BY R.REQUEST_ID DESC
Go to system profiles and query for 'Concurrent:Report Access Level', responsibility you need and modify the profile name accordingly.... -
Diplaying segment name in output file using receiver FCC
Hi,
we have a idoc to file scenario. we are using FCC at the receiver. the flat file generated should have the segment names before the values .
for example, if the structure is something like this
<root tag>
<serment1>
field1
field2
<segment2>
field1
field2
<segment2>
field1
field2
the output should be in the below format
segment1 field1value,field2value
segment2 field1value,field2value
segment2 field1value,field2value
can some one guide me how to achieve the same. Also if the segment repeats, in the output also it shoukld appear
Best Regards
DeepikaIn mapping, output structure, create an extra field at the beginning and
map that field to a constant value same as the source segment name.
In Receiver FCC, use following configuration.
Recordset Structure: segment1,segment2(specify all segments seperated by comma)
segment1.fieldSeparator : , (it is comma)
segment1.endSeparator :'nl'
segment2.fieldSeparator : ,
segment2.endSeparator :'nl'
specify the same fieldSeparator and endSeperator for the other segments also -
Receiver SFTP adapter giving spaces between characters in the Output file
Hi PI Experts,
My Scenario is: Paymul (EDI file ) ECC -> PI -> SFTP server.
Source Sender File adapter able to pickup this Paymul D96A file and able to send messages to target SFTP server using SFTP receiver adapter.
But, Generated Output file having single space between each character. I am not using any content conversion modules in Receiver SFTP adapter.
Also not having any mappings to transform the messages. it is just pass through interface.
I have attached example Output file. I have changed the .Dat file to .txt just to attach here.
Could any one try to help me on this. Please let me know incase need any more details.
Thanks,
Govindu.Hi Govindu,
Please see if the below Endcoding settings wont resolve your issue.
File Type - Text
File Encoding - ISO-8859-1
Regards,
Jannus Botha -
Generate PDF file using form parameters
how to generate output file like PDF while parameters pass thru form builder. i dont want output on screen.
i just want to pass parameters thru form builder and report builder will automatically generate output file like PDF onto my hard drive.Dear all,am new to oracle report and oracle forms and i know the
basics how to generate the report and to create the form, Now my doubt is, like generating report
from oracle report how to generate the report from oracle from,should i add any command button? and where
to add the coding and what coding ? when i click that command button the report should be generated like oracle
report,what should i do?Please help me to learn.
my table name is 'student' and it has the following columns,
sid,sname,grade,result.
Am using oracle from 10.1.2.0.2 version and
oracle report version is 10.1.2.0.2.
Please give step by step procss.
Thank you. -
Hi All,
I am using Oracle Developers Suite 10g. I want to generate output file of the Report Developer with time stamp like report01_19-03-2007_17-45-20.rtf
What to do? I am using the following script to generate the report but its generating only like report01.rtf file. Please help so that instead of report01.rtf I can have report01_19-03-2007_17-45-20.rtf file (this is with current date+time).
At desname I have put ?????? if I don't put any thing it generates report01.rtf file.
C:\DevSuiteHome_1\bin\rwrun.exe userid=username/password@DB
report=C:\scm\reports\repfiles\oracle\report01.rep
distribute=no
destype=file
desname=
desformat=rtf
p_countrycode=GB
p_languagecode=en
ThanksSuggestion -
Improve script
Let include dinamic desname in
desname=
Or use/rename somehow (by script)
report01.rtf
filename with accordance to file timestamp...
( if report01.rtf is not overwritten )
As well maybe for some ideas look "Destinations" http://download-west.oracle.com/docs/cd/B10464_05/bi.904/b13673/pbr_dist.htm#i1006607 -
Submitting xml publisher not producing output file when submiting from Oracle Procedure
When Running XML publisher program from Oracle Procedure, Program not generating output file, but same XML publisher program running from Concurrent program runs and produces the output file.
Here is the code
CREATE OR REPLACE PROCEDURE apps.wmmgd_sepa_formats (
p_return_msg OUT VARCHAR2,
p_return_code OUT NUMBER,
p_payment_batch IN VARCHAR2 ---,
--- p_bank_name in varchar2
IS
name: wmmgd_sepa_formats
purpose: this procedureis to create SEPA payment formats
revisions:
ver date author description
1.0 6/11/2013 V Gongireddy Created the Procedure
l_ret BOOLEAN;
l_req_id NUMBER;
v_org_id NUMBER;
v_cntr NUMBER;
v_file_name fnd_concurrent_requests.outfile_name%TYPE;
v_language VARCHAR2 (20);
BEGIN
SELECT fnd_profile.VALUE ('ORG_ID')
INTO v_org_id
FROM DUAL;
fnd_file.put_line (fnd_file.LOG, 'org id ' || v_org_id);
fnd_file.put_line (fnd_file.output, 'Start org id ' || v_org_id);
FOR i IN 1 .. 10000
LOOP
v_cntr := v_cntr + 1;
END LOOP;
l_ret :=
fnd_request.add_layout ('SQLAP',
' WMMGDSEPAFORMATXSL',
'en',
'US',
'XML'
IF l_ret = TRUE
THEN
BEGIN
fnd_file.put_line (fnd_file.output,
'Payment batch ' || p_payment_batch
l_req_id :=
fnd_request.submit_request ('SQLAP',
'WMMGDSEPAFORMAT',
FALSE,
p_payment_batch
v_cntr := 0;
FOR i IN 1 .. 10000
LOOP
v_cntr := v_cntr + 1;
END LOOP;
p_return_msg := 'Request submitted. ID = ' || l_req_id;
p_return_code := 0;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
p_return_msg :=
'Payment Request set submission failed - unknown error: '
|| SQLERRM;
p_return_code := 2;
fnd_file.put_line (fnd_file.LOG,
'the_request_id ' || l_req_id || p_return_msg
END;
END IF;
END wmmgd_sepa_formats;
Thanks in advanceAnd metalink note 1100253.1 states that this issue (java.lang.StackOverflowError) might be caused by a too large set of data to be sorted in the layout file. Recommendation is to removed the sort from the layout file and instead sort the data already in the data definition.
regards,
David. -
I have an Oracle database and need to generate output files that contain the results of queries. The output files must be in xml format. I have the dtd's and I need to ensure that the xml files are in the defined format. I have limited experience of using xml. How should I go about this?
I am looking into using the XSQL utility to produce xml pages. I have looked at the documentation but I still have some questions as follows:
I have dtd's already and I am wondering
- how the format of the xml pages is determined?
- will XSQL use the dtd's for the purpose of formatting?
- with what versions of the oracle database is this feature available? -
Gcc is not running executing output file
Hi Guys,
I have complied C program using gcc compiler on my MAC OSX 10.8.3, Xcode 4.6.3 and GCC 4.2.1
It generated output file but when I am trying to execute output file it is showing below error and not showing output.
Can somebody help me on this please?
Prashants-Mac-mini:scripts appdev$ ./first.o
-bash: ./first.o: Malformed Mach-o fileYou skipped the linking step:
gcc first.o -o first -
Segmentation fault when calling gpctr function from matlab mex file
I am trying to write a simple mex file for square wave generation using counter1 of PCI-6035E. I am using matlab's native compiler to compile and link with the nidaq32 library, ver.6.9.3, with no errors. When the mex function is called from a matlab script, however, the program crashes at the first call, to reset the counter. (I can generate a square wave with the test panel.)
Sorry for the delay in responding. I got caught up in other stuff. I am attaching my little program as requested. As you can see, I have just wrapped a mexFunction call round the example code for square wave generation. After I posted this, I tracked down a copy of BorlandC++, installed it on my computer and recompiled using that compiler and *b.* libraries. And would you know it, the program works. The question remains, though, why it doesn't work with Matlab's native lcc compiler. Plus, I have limited disk space, so if I can do without BorlandC, I can use the extra room. The runtime error was a Segmentation fault that I traced to the first call to GPCTR_Control.
Attachments:
pulsegen.c 4 KB -
When I Generate PDF file(In Hindi Word) then Output is Blank only Englis
Hi,
When I Generate PDF file(In Hindi Word) then Output is Blank only English is coming.
So can u suggest me ,How to show PDF file in Hindi word.I am using jasper report and Jasper report internally Jasper viewer output is showing all format.But PDF is not showing..
I am using jasper report 4.0.1.
Plz help me..
Thanks
AnupHi,
searched your post for keywords "JDeveloper" "ADF" "JSF" but could not find them. So are you sure you are posting to the right forum?
If you have an issue with MS WOrd and PDF then Microsoft and Adobe are the ones to call for help. Jasper Reports also is not owned by Oracle, which is another area you want to investigate
Frank
Maybe you are looking for
-
Grouping compilations no longer works after adding artwork..!
Until yesterday I had never bothered with adding artwork to my itunes library as I had a gen 3 iPod that would not show it anyway. I have a new ipod so last night I decided to add artwork, this I did by getting what I could from Gracenote, the rest I
-
Mac Mini + DVI- HDMI + Toshiba 42RV530U = black screen
Hi all, I have a new Intel Mac Mini 2GHz and a Toshiba 42RV530U REGZA HDTV that I'm trying to connect, with only a black screen so far. I believe the DVI output on the Mini is working - I can at least get a picture with a DVI-S-Video cable, but it's
-
10.3.9 - 10.4 Migration failed! Server lost! - How to set DHCP info?
Today we tried to migrate our Xserve from 10.3.9 to 10.4 We've chosen to start the update from a PowerBook and attached our Xserve in FireWire Target Mode. Update/Install ran smoothly, BUT ON RESTART WE LOST CONTACT TO OUR XSERVE In system.log it say
-
Mavericks, change resolution of headless Mac Mini
After updating to Mavericks I have have problems at changing the resolution of my headless Mac mini. After changing the display resolution my VNC/Screen Sharing sessions kept blacking out and I couldn't see anything. Any solution? Thanks, Andrea
-
2 Repeating Frames based on the same group
I have this report which contains 3 groups, I have the requirement to break the 2nd group so that I create a 'footer' based on the 2nd group. I have created 2 repeating frames (one which holds the account number, payment terms, currency) and the 2nd