Ldap users import with access group

Hi,
I have callmanager 10.5 with LDAP. I want to import users and assign thse users to an access controll group (like ccm enduser etc)
I configure, I import the users, but they are not member of an access controll group and I have to do it still manual.
Not so much work, but why doesn't it work?
Any one else seen this?
JH

Did you add the Group information to the System > Ldap directory settings? In CUCM under the LDAP Directory you're sync'ing with you want to add the Standard CCM End Users to the "group information" for that directory before you sync.
If you sync first, then add the groups it it will only apply the groups to newly created users.

Similar Messages

Error while configuring external LDAP user store with weblogic

Hi,
I have weblogic 10.3 installed and I can access weblogic admin console using weblogic (admin) user. I want to use external ldap user store to access admin console with users present in external ldap.
To do this, I have configured authentication provider and provided all the required details to connect to ldap.
For example:
Base DN: cn=admin,cn=Administrators,cn=dscc (user with which we will connect to LDAP)
User DN: ou=People,dc=test,dc=com
Group DN: ou=Groups,dc=test,dc=com
This authentication provider is set to SUFFICIENT mode. I have deleted the default authentication provider.
In the boot.properties file I have given the user name and password of the user with which LDAP instance was created something like below.
password=xxxxxxx
username=admin
Now while starting the admin weblogic server, I am getting the below error:
<Jul 25, 2012 2:22:28 PM IOT> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Jul 25, 2012 2:22:28 PM IOT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:960)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1054)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User admin javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User admin denied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:261)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Jul 25, 2012 2:22:28 PM IOT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Jul 25, 2012 2:22:28 PM IOT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Jul 25, 2012 2:22:28 PM IOT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Can anyone please suggest how to resolve this problem? If, anyone can suggest the exact steps to configure external ldap store to manage admin console via ldap users.
Regards,
Neeraj Tati.

Hi,
Please refer the below content that I found for Oracle 11g in the docs.
"If an LDAP Authentication provider is the only configured Authentication provider for a security realm, you must have the Admin role to boot WebLogic Server and use a user or group in the LDAP directory. Do one of the following in the LDAP directory:
By default in WebLogic Server, the Admin role includes the Administrators group. Create an Administrators group in the LDAP directory, if one does not already exist. Make sure the LDAP user who will boot WebLogic Server is included in the group.
The Active Directory LDAP directory has a default group called Administrators. Add the user who will be booting WebLogic Server to the Administrators group and define Group Base Distinguished Name (DN) so that the Administrators group is found.
If you do not want to create an Administrators group in the LDAP directory (for example, because the LDAP directory uses the Administrators group for a different purpose), create a new group (or use an existing group) in the LDAP directory and include the user from which you want to boot WebLogic Server in that group. In the WebLogic Administration Console, assign that group the Admin role."
Now in my LDAP directory, setup is in such a way that Administrators is a group created under following heirarchy " cn=Administrators,ou=Groups,dc=test,dc=com" and there is one user added in this Administrators group.
The problem that I am having is when I modify the Admin role in which Administrators group should be added what exaclty I should give in Admin role. Whether I should give only Administrators or full DN: cn=Administrators,ou=Groups,dc=test,dc=com ???
When i give full DN, it takes every attribute as different, i mean cn=Administrators as different and ou=Groups as different and shows a message that cn=Administrators does not exist.
Here not sure what to do.
Also if external ldap authentication provider is the only provider then I need to give the user information in boot.properties file also for weblogic to boot properly. Now, what should I give there in user? still complete DN ??
Regards,
Neeraj Tati.

Is there an option to import with custom groups in PSE 9's organizer?

With the Organizer included with PSE7 (and earlier, as I recall), I always used the option Custom Groups (Advanced) in Create Subfolders. This allowed me to easily save imported photos into different folders and naming the files accordingly.
For example, on one media card I might have some family activities, some Kiwanis activities, and skiing activities. With Custom Groups, I could import them in small groups, with different base names, and so on.
How do I accomplish those same things in PSE9. It was such a useful feature, Please tell me they did not remove it.
Thanks!

As far as adding java script to the generated form you can add a pl/sql code having java script in it for eg below is a sample function
which has javaScript in it.
CREATE OR REPLACE FUNCTION sample_javaScript
RETURN varchar2 IS
l_string varchar2(1000);
l_char_en varchar2(1) := chr(38);
begin
l_string := '<script language="JavaScript1.1">'||chr(10)
||''||chr(10)
||'</script>'||chr(10);
return l_string;
end sample_javaScript;
Grant this to the schema of the form if they are in different schemas.
In the last sql section (Before Display of the form) you can simply call this function like this.
htp.p(schemaName.sample_javaScript);This will place java script at the form level.
You can similarly write what all javascripting you wish to do at the form level instead of
element level.For firing of Lovs also you can write code in the java script that will do the required action.

Sharing the LDAP user database with Cisco ASA5510

Hi all,
We have recently purchased a Cisco ASA5510 security appliance which acts as our VPN gateway. This device can authenticate using either Radius or TACACS protocols (or have its own internal data base).
Can we share in some way the internal LDAP users and authentication data base with our Cisco device?
Thanks,
Ziv

Good question! I am trying to do VPN authentication via Radius on our D-Link DFL-800. It worked well in 10.4 with a custom freeRadius, but now it's not working with the bundled freeRadius (it's not issuing MPPE keys). But yes, it does try to authenticate, I just added the firewall IP and shared secret in the Radius settings in SA.

New iMac 21.5". How can I set up a new user account with access to all the files of the original user account?

Running Mavericks on a 2013 iMac 21.5". I want to set up a second user account with different settings that meet the requirements of specific software. I need the files to be accessible by both users. I have made both the main and secondary accounts administrators. I have also enabled file sharing for both. Neither account can see the other's files in Finder.
How can I make all files accessible to both accounts? I read that administrator accounts automatically can see all files on the computer, but it is not working out that way. I have restarted the computer, to no avail.

Comcast only offers POP accounts, and one way to set up the account and enter all the settings before it connects to the mail server, might be to do it Offline:
https://support.mozilla.org/en-US/questions/991539#answer-547878
The server settings are given [http://customer.comcast.com/help-and-support/internet/setting-up-thunderbird/ here], but the method is for Online account setup.

Hierarical Query to build user menu with access

Hi All,
I am facing problem in populating user menus in hirarical against user access control.
I have table of menus in which i populate data as:
Menu
- Sub Menu 1
-- Form 1
-- Form 2
-- Form 3
- Sub Menu 2
-- Form 4
-- Form 5
-- Form 6
Now I have created hierarical query as:
SELECT -1, LEVEL, menu_name, NULL, id
FROM menu_opt
START WITH parent_id IS NULL
CONNECT BY PRIOR menu_id = parent_id
and menu_id in
(3, 4);
Note: where menu_id 3 = Form 1, Menu_id 4 = Form 2.
If I allow only menu ID 3 and 4 (not parents menus) then Hieraricy should be completed from top to bottom. What change i have to made to achieve my target?
Thankx

Do not duplicate posts.
Did you ask your question in the sql-forum as suggested?

BAPI to get a user list with access rights to particular objects

Hi Experts,
BAPI to get all user lists for input specific object, authorizations, profiles and values?
Any useful answer will be rewarded with suitable points.
Thanks,
Rohan

Hi Rohan
Use the BAPI:
BAPI_USER_GET_DETAIL
Regards,
Sree

User Exit with access to all line items in sales order

Hi,
Is there any user exit/BADI, where we have access to all line items at the same time?
Thanks
Kamal

In the Transaction is VA01/2/3 u can use program MV45AFZZ.
this is user exit for SO.
regards
Prabhu

BAPI to get all user lists with access rights to particular objects

Hi Experts,
Is there any BAPI to get all input related user lists for input specific object, authorizations, profiles and values?
Thanks,
Rohan

Hello,
BAPI_USER_DISPLAY Display users
BAPI_USER_GET_DETAIL Read User Details
Vasanth

Server App not seeing external LDAP users & groups

I have a clean 10.8.2 + Server install set up with our standard external LDAP directory (Novell's eDirectory in our case) configuration that is known to support Lion & Mountain Lion client LDAP authentication. With this same configuration on OS X 10.8.2 Server both Directory Utility and WGM can see all the LDAP users and groups as expected.
When I look for the external users & groups in the LDAP domain under the Server App "Accounts" heading I cannot see any entries in either users or groups lists. Should I be able to or is this a Server App quirk?
I can add individual LDAP users to a local group and enable access to individual services. How can I give access to services to all LDAP users without having to build & maintain a massive "All LDAP Users" local group?
Is there a published list of required LDAP attributes for users & groups for Mountain Lion Server? I suspect there are new requirements over and above those for 10.6 server but I have failed to find a good reference. I've noticed I get different behaviours for LDAP templates that includes a mapping for GeneratedUID to one which does not for example.
This is all so much more opaque than our superbly reliable Snow Leopard servers!
TIA

Ok, and again:
You want to see Users and Groups , which are stored in an third Party directory service like OpenLDAP, in your Server.app? This is what you have to do:
Connect the third party ldap to your server
Have all your external LDAP entries made so you can see them in the Workgroup Manager and are able to Login with them
When you see your LDAP-entry in the Directory Manager, change it from "From Server" to "RFC2307"
Edit the entry, add the following mapping to it:GeneratedUUID maps to apple-generateduuid
To your group and user entries in the external LDAP add the follwing attribute:apple-generateduuid gets the value taken from the output of "uuidgen"
Feel lucky
And there ist ist; now you are able to use The accounts taken from an external LDAP.

HT4837 3rd Party LDAP users in local groups aren't recognized by wiki

Having followed the KB article on setting up wiki webauth to allow 3rd party LDAP users to authenticate (http://support.apple.com/kb/HT4837) I have found that while individual users can be given permissions to access certain wikis, but LDAP users placed into local groups cannot. Is this a bug?
To be more specific:
- Directory Access setup to allow authentication from LDAP server (this works fine for all other services like File Sharing)
- Directions followed in the KB article which basically enables plain text authentication and turns off inline login window (http://support.apple.com/kb/HT4837)
- Local groups created in Server.app -- Accounts -> Groups
- LDAP users placed into those local groups
- Services like file sharing recognize proper permissions based on the groups the LDAP users are in
- Configure a wiki to allow access from a single LDAP user (Gear Icon -> Wiki Settings...) ... this works fine
- Configure a wiki to allow access from the local groups containing LDAP users (again, Gear Icon -> Wiki Settings) ... this appears like it is going to work, but it in fact will fail to give permissions to LDAP users of the respective group upon that user's login. A local user (Server.app -> Accounts -> Users) added to one of these local groups with LDAP people in it works fine and receives proper access to the wiki as expected.
Any ideas before I submit this as a bug?

Having followed the KB article on setting up wiki webauth to allow 3rd party LDAP users to authenticate (http://support.apple.com/kb/HT4837) I have found that while individual users can be given permissions to access certain wikis, but LDAP users placed into local groups cannot. Is this a bug?
To be more specific:
- Directory Access setup to allow authentication from LDAP server (this works fine for all other services like File Sharing)
- Directions followed in the KB article which basically enables plain text authentication and turns off inline login window (http://support.apple.com/kb/HT4837)
- Local groups created in Server.app -- Accounts -> Groups
- LDAP users placed into those local groups
- Services like file sharing recognize proper permissions based on the groups the LDAP users are in
- Configure a wiki to allow access from a single LDAP user (Gear Icon -> Wiki Settings...) ... this works fine
- Configure a wiki to allow access from the local groups containing LDAP users (again, Gear Icon -> Wiki Settings) ... this appears like it is going to work, but it in fact will fail to give permissions to LDAP users of the respective group upon that user's login. A local user (Server.app -> Accounts -> Users) added to one of these local groups with LDAP people in it works fine and receives proper access to the wiki as expected.
Any ideas before I submit this as a bug?

LDAP- When importing a Group it goes into Security Users and not Groups.

Hello,
I created a new LDAP Server
cn=GroupBI,OU=Groups,OU=Systems,OU=Milan,OU=Italy,OU=Countries,DC=u,DC=a,DC=g
Connection Test was ok.
The problem is on importing members of my group, on Security Import window instead of having the group drop-down list populated I have the user drop-down list populated with "GroupBI".
If I import this group (considered as a user by BI) it goes into Security > Users and not Security > Groups.
This does not make sense.
I'm sure this "GroupBI" is a group and not a user and the atribute type used is sAMAccountname
Any help?
Cheers

Let me tell how we did Authentication using LDAP
I havent imported any groups or users once the LDAP is set up and connection was successfull. I simply created the session variables USER DISPLAYNAME EMAIL and mapped to LDAP Variables uid, displayname, mail.
Authentication is done in this way by mapping the OBIEE variables to LDAP variables instead of importing the groups.
Now for Authorization I created the groups populated using some db tables and captured the group name and loglevel and applied filters on the group in the rpd for data level and permissions on the group in webcat for object level.
So just for Authentication purposes I think we can authenticate with out really importing groups as long as you map OB variables to LDAP
hope it helps
Prash

How to only synchronize one specific LDAP user group with SAP?

Hi,
Hopefully this is the correct forum to post this in. I want to have continuous one-way synchronization of users from my LDAP server to my SAP central system. I've started configure in SAP using transaction SM59 and LDAP. Can I somewhere set that only one specific LDAP user group shall be transferred to SAP (they do not need to be assigned to any specific group, profile, role in SAP) - or should this be done on the LDAP server side (or is it at all possible)?
Correct me if I'm wrong, but the User Group field in the report RSLDAPSYNC_USER only concerns SAP user groups right? This would therefore not be sufficient since I want to select the users to synchronize based on user groups in the directory.
Thanks, Oscar

We've used a repository constant to specify the LDAP filter for reading users / groups from the LDAP target.
E.g. LDAP_FILTER_USERS (&(objectCategory=person)(objectClass=user))
Then we also have a constant for the LDAP_STARTING_POINT
For our AD Group Initial Load we filter according to these settings:
LDAP_FILTER_GROUPS = (objectclass=group)
LDAP_STARTING_POINT_GROUPS = ou=IDMManagedGroups,ou=Groups,dc=cfstest,dc=le,dc=ac,dc=uk
The above example only reads AD groups starting at the specified OU
Then in a Job From LDAP Pass the LDAP URL looks like this:
LDAP://%$rep.LDAP_HOST%:%$rep.LDAP_PORT%/%$rep.LDAP_STARTING_POINT_GROUPS%?*?SUB?%$rep.LDAP_FILTER_GROUPS%
I hope this helps
Paul

LDAP user group

I have configured the LDAP to connect to the AD. I can see the required Roles in the "Roles to Map" Tab on LDAP user Configuration.
I am able to import the Users.
I am able to see the groups in the SAP xMII Menu -> Portal Services -> Navigation tab and also in SAP xMII Menu -> Security Services -> System Security.
But when i assign pages to the Roles and Login with the Users under the Role. The Navigation menu doesnt show the pages linked to the role. When i tried accessing the property using http://<server name>/Lighthammer/PropertyAccessServlet?Mode=List, It shows that the user doesnt belong to any roles(blank space in place of roles).
However, when i try to check the same using LDAP queries (Select Roles for User & Select Role by Distinguished Name) it shows that the user belongs to the group to which i assigned the pages in the SAP xMII Menu -> Portal Services -> Navigation Menu.
Does it have something to do with the Role mapping in the LDAP user configuration? I havent assigned any of the groups(including the one i want) to any of the default xMII roles.
I also tried assigning all the roles to all the services in xMII. It still shows that the user doesnt belong to any group. Manually if i assign to any group through SAP xMII Menu ->Security manager ->Roles ->Admin, it works fine. But, as the imported groups are not listed in the security manager I cannot manually assign these users to the groups(also i cannot do this for all the users, even if it was possible)
Any ideas?

I tried assigning the user to the Everyone group and also checked the Logs. Below are the results:
cmsseclogin.log
2007-11-28 17:12:04,097 [login] IP 64.240.152.5 - Successful login for user a0000, service url http://phixmiiqas01.sbs.int/Lighthammer/
2007-11-28 17:12:04,534 [login] IP 10.144.18.63 - Ticket has been validated for user a0000
cmssecurity.log
2007-11-28 17:12:04,472 [ServletExec: request: time=1196287924456, uri=/LHSecurity/validate] WARN Validate - Proxy URL requested [http://phixmiiqas01.sbs.int], is not a authorized proxy
no luck so far!!

LDAP Users and Groups

Hi,

I have configured an LDAP Authenticator for an external LDAP directory in the security realm of the samples portal. User Management is working, but when I try to access the Group Management for the LDAP Authenticator I get the following error:

com.bea.p13n.usermgmt.hierarchy.TreeNotBuiltException: State: UNINITIALIZED. Tree is uninitialized. Add provider GAAD to list of providers to build. Tree is uninitialized. Add provider GAAD to list of providers to build.


It seems that this needs to be setup. How do I do this?


Some general notes on LDAP:

I think that in a production environment it is of great value to manage users and groups in a LDAP directory. For instance we have a company directory which contains all users. It seems that users from LDAP can not been added to groups which are in the DB. LDAP also has the advantage of supporting dynamic groups.
As in previous weblogic releases the LDAP authenticator is read only. It would be great if the write functionality could be added as well. Actually managing LDAP users and groups in one place would be a tremendous improvement for us.

Another thing on my wishlist are examples for delegated administration and visitor entitlements. For the sample portal these are empty. But I think it would be nice to have some out of the box examples that show what is possible and help developers and business analysts to understand the concepts and create their own roles.

It would be interesting to read what Bea and other developer think about this.

Kind regards,

Kai


Marcus,
Yes, I am using 9.2 TP.
We are already using LDAP for user management with 8.1.
Now, I try to configure 9.2 as well. I am running 9.2 installations on different machines. When I click on Service Administration in the Admin Portal, I get the following error message for each installation:
java.lang.NullPointerException at com.bea.jsptools.serviceadmin.ads.ToolAdServiceBean.cloneFromAdServiceBean(ToolAdServiceBean.java:190) at com.bea.jsptools.serviceadmin.ServiceAdminTreeBuilder.buildAdContentProviderNodes(ServiceAdminTreeBuilder.java:769) at com.bea.jsptools.serviceadmin.ServiceAdminTreeBuilder.buildAdServiceBranch(ServiceAdminTreeBuilder.java:746) at com.bea.jsptools.serviceadmin.ServiceAdminTreeBuilder.createTreeElement(ServiceAdminTreeBuilder.java:184) at com.bea.jsptools.patterns.tree.TreeService$DefaultTreeServiceImpl.buildWholeTree(TreeService.java:234) at com.bea.jsptools.patterns.tree.TreeService$DefaultTreeServiceImpl.buildWholeTree(TreeService.java:235) at com.bea.jsptools.patterns.tree.TreeService$DefaultTreeServiceImpl.buildTree(TreeService.java:122) at util.tree.TreeController.constructTree(TreeController.java:142) at util.tree.TreeController.buildTree(TreeController.java:422) at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source) at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source) at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:852) at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:782) at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:456) at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:285) at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336) at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:48) at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:419) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:1984) at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:90) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2055) at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:224) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:535) at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:821) at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:625) at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:156) at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414) at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1178)
java.lang.NullPointerException
java.lang.NullPointerException
at com.bea.jsptools.serviceadmin.ads.ToolAdServiceBean.cloneFromAdServiceBean(ToolAdServiceBean.java:190)
at com.bea.jsptools.serviceadmin.ServiceAdminTreeBuilder.buildAdContentProviderNodes(ServiceAdminTreeBuilder.java:769)
at com.bea.jsptools.serviceadmin.ServiceAdminTreeBuilder.buildAdServiceBranch(ServiceAdminTreeBuilder.java:746)
at com.bea.jsptools.serviceadmin.ServiceAdminTreeBuilder.createTreeElement(ServiceAdminTreeBuilder.java:184)
at com.bea.jsptools.patterns.tree.TreeService$DefaultTreeServiceImpl.buildWholeTree(TreeService.java:234)
at com.bea.jsptools.patterns.tree.TreeService$DefaultTreeServiceImpl.buildWholeTree(TreeService.java:235)
at com.bea.jsptools.patterns.tree.TreeService$DefaultTreeServiceImpl.buildTree(TreeService.java:122)
at util.tree.TreeController.constructTree(TreeController.java:142)
at util.tree.TreeController.buildTree(TreeController.java:422)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Unknown Source)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:852)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:782)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:456)
at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:285)
at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:48)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:419)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:1984)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:90)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2055)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:224)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:535)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:821)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:625)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:156)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1178)

Ldap users import with access group

Similar Messages

Maybe you are looking for