LEAP with CKIP Encryption?

Is it possible, to use LEAP with CKIP Encryption?
At the moment I use 802.1X with LEAP Authentication, but then only Static WEP is available as encryption.
I read somewhere in the documentation that at the moment only static CKIP is available.
Does this mean, that 802.1X (LEAP) with CKIP will be available in a future release?
At the moment I use 4402 with 4.0.179.8
Regards,
Christian...

LEAP with CKIP requires security combination requires 12.2(11)JA or later.It is supported on Windows 95/98, Me, NT, 2000, XP, Windows CE, Mac OS X, Linux, DOS.Refer URL
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_configuration_guide_chapter09186a00804e7d09.html

Similar Messages

Can anyone recommend a portable USB 3.0 drive with hardware encryption, compatible with OSX and Windows 7. I need it for my MacBook Pro 13", 2012, running Mountain Lion

Can anyone recommend a portable USB 3.0 drive with hardware encryption, compatible with OSX Mountain Lion and Windows 7. I need it for my MacBook Pro 13”, 2012, running Mountain Lion & Windows 7 Ultimate - BootCamp. I’ve heard that the Buffalo MiniStation Encryption does not work with OSX, is that true..? I'd like it to work with both operating systems, using the built in hardware encryption. Thanks

This article may help: A flashing question mark appears when you start your Mac.

Win 7 dual boot with SafeBoot encryption halfway there!

EDIT: Sorry for changing the title. It used to be Need those knowledgeable with Windows (esp. 7) for dual boot input, but I had some success and didn't want to start a whole new post. See the last comment for the update!
Hi,
Disclaimer: please don't feel compelled to issue warnings regarding doing this on a work computer. I'm aware of the risks, have talked about what I do on my computer (such as wiping it and installing Linux only over my Win issued encrypted system) with a higher-up in IT that I know well, and I have spoken with IT reps about my running Linux. They don't care; they just don't support it or help. I even have an online community for Linux users at work. I'm searching for a work-around that will allow me dual boot while fully maintaining the protection my company seeks by issuing encrypted systems (i.e. replacing a proprietary encryption tool with an open source one).
I'm in a tricky situation. At work I'm issued a computer with SafeBoot, a full-disk encryption tool. On my last computer, I simply installed Arch over everything because dual booting was not possible. I really need Windows, but since I had a desktop as well for CAD usage, I used that for Win and just had Linux on the laptop. My lease just came up and I was issued a new laptop for the next three years. In addition, they upgraded the laptop so I can run CAD from it and they'll be taking my Windows desktop.
So... I'm on a mission to try to find a dual boot solution. I used to run Linux from a flash drive, but sharing data was impossible since I still can't even mount the Win partition and the flash drive isn't big enough to hold anything useful besides the OS itself (8gb). Here's my hope forward:
- Make a bootable clone of Win 7 while it's running with the hope that it's not encrypted
- Test it quite repeatedly to make sure I can boot from it
- Wipe the drive and create a partition for Win and one for Arch
- Use TrueCrypt (or some other cross-platform encryption system) for Win 7
- Restore Win 7 from my bootable clone back onto the encrypted partition on the laptop HD
- Install Arch with LUKS/dm-crypt
- Be extremely happy and celebrate.
Does anyone know if the first steps in particular are feasible? I have used Carbon Copy Cloner on my Mac and it can make a bootable clone while the system is running. It's actually quite awesome because you have an incremental backup solution that youc an also boot from in a pinch in case you need to do something to your HD that can't be done when it's mounted. Much faster than booting from the OS X install disk.
I've been looking for an equivalent on Win and not happy so far. Macrium sounded promising, but when running it, it seems to want to backup to some kind of image file, not simply do a file copy of everything on the drive. Perhaps this will work... I'm just not sure. I also looked at DriveImageXML, but am not sure about that either. I'm using the built-in Win backup tool right now and will see if that works.
Does anyone know of a tool that will do this? CloneZilla or any Linux tool will not work because a literal clone (like dd) made while the computer is off is worthless. I need a decrypted backup.
Lastly, any other general input? Does this seem feasible?
Thanks!
Last edited by jwhendy (2011-04-15 22:02:07)

Wow! I can't believe this is working. The rough gist of it is that I think I've found a method that won't require virtualization or fiddling with SafeBoot or having to jump through hoops to either clone while running (to have a decrypted clone), or try to do something like THIS (this is terrifying, since it involves making a clone with dd while it's encrypted and then restoring the SafeBoot encrypted mbr somewhere else later). The gist is like so:
- Use Win7 built in partition editor to shrink it down as far as possible. For me, this was down to about 130G (out of ~230G)
- Use same tool to creat two additional partitions: one for Arch and one for TrueCrypt
- Used Partition Wizard Home Edition to change the type to 0x83 (very necessary)
- Reboot, install Arch to /dev/sda2
- Install grub to /dev/sda2, not to the MBR!
- Reboot into Windows and used EasyBCD to add an archLinux entry to the Win7 boot options
- Rebooted and tried it out!
- I'm logged into Arch right now!
This is actually quite incredible. I think this is about the best I could have asked for. I get to avoid any issues with replacing SafeBoot with something else (even though I'm not sure my IT group really cares [1]), I get a dedicated Linux install, which runs much better and cleaner than virtualizing, and I can share all my stuff via the TrueCrypt partition [2].
I'll keep everyone posted and will probably end up adding this to the wiki. I think this is a win-win situation. [3]
Footnotes:
[1] For example, users are permitted to use their personal Macs at work... but they're not encrypted. People just bring them in and use them. They're obviously not protected, so why would IT care if my computer is encrypted with TrueCrypt vs. SafeBoot when they let people run around with no encryption? Not to mention, as said above, I've talked about my doings with an IT higher-up and he's never said anything of caution about not having encryption -- just suggested I routinely run ClamAV. I did get some strong words of caution on SuperUser. I guess everyone can be happy this way.
[2] I have yet to set this up, but think it will be far easier than what I just went through!
[3] The only thing I'm bummed about is that Win7 couldn't be resized any smaller because of unmovable safeboot related files during defrag. It's only using 30G of space right now, but wouldn't shrink below 129G. It doesn't really matter -- I have 30G for Linux and about 80G for my storage. My storage isn't more than 11G for all my work documents right now, so I don't really anticipate blowing through another 70G anytime soon.

How to compare Entering Password with existing encrypted pasword in APEX4.1

Hello everyone,
In my application am using the following package,
create or replace PACKAGE BODY app_security_pkg
AS
PROCEDURE login
           p_uname IN VARCHAR2
          ,p_password IN VARCHAR2
          ,p_session_id IN VARCHAR2
          ,p_flow_page IN VARCHAR2
IS
lv_goto_page NUMBER DEFAULT 1;
BEGIN
-- This logic is a demonstration of how to redirect
-- to different pages depending on who successfully
-- authenticates. In my example, it simply demonstrates
-- the ADMIN user going to page 1 and all other users going
-- to page 2. Add you own logic here to detrmin which page
-- a user should be directed to post authentication.
IF UPPER(p_uname) = 'ADMIN'
THEN
lv_goto_page := 1;
ELSE
lv_goto_page := 2;
END IF;
APEX_UTIL.SET_SESSION_STATE('FSP_AFTER_LOGIN_URL');
wwv_flow_custom_auth_std.login
p_uname => p_uname,
p_password => p_password,
p_session_id => p_session_id,
p_flow_page => p_flow_page || ':' || lv_goto_page
EXCEPTION
WHEN OTHERS
THEN
RAISE;
END login;
PROCEDURE add_user
p_username IN VARCHAR2
,p_password IN VARCHAR2
AS
BEGIN
INSERT INTO app_users (username, PASSWORD)
    VALUES (UPPER (p_username),
        get_hash (TRIM (p_username), p_password));
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
RAISE;
END add_user;
-- Function to Perform a oneway hash of the users
-- passwords. This cannot be reversed. This exmaple
-- is a very week hash and if been used on a production
-- system, you may want to use a stronger hash algorithm.
-- Read the Documentation for more info on DBMS_CRYPTO as
-- this is the supported package from Oracle and
-- DBMS_OBFUSCATION_TOOLKIT is now depricated.
FUNCTION get_hash (p_username IN VARCHAR2, p_password IN VARCHAR2)
RETURN VARCHAR2
AS
BEGIN
RETURN DBMS_OBFUSCATION_TOOLKIT.md5 (
input_string => UPPER (p_username)
                || '/'
                || UPPER (p_password));
END get_hash;
PROCEDURE valid_user2 (p_username IN VARCHAR2, p_password IN VARCHAR2)
AS
v_dummy VARCHAR2 (1);
BEGIN
SELECT '1'
INTO v_dummy
FROM app_users
WHERE UPPER (username) = UPPER (p_username)
AND PASSWORD = get_hash (p_username, p_password);
EXCEPTION
WHEN NO_DATA_FOUND
THEN raise_application_error (-20000, 'Invalid username / password.');
END valid_user2;
FUNCTION valid_user (p_username IN VARCHAR2, p_password IN VARCHAR2)
RETURN BOOLEAN
AS
BEGIN
valid_user2 (UPPER (p_username), p_password);
RETURN TRUE;
EXCEPTION
WHEN OTHERS
THEN RETURN FALSE;
END valid_user;
END app_security_pkg;Here the ADD_USER Procedure will convert the password and stores into the app_users Table in encrypted form.
In my application the users can change their password,
so I need to compare the entering password in the Current_password field with the Encrypted password in the app_users table,
so I used the following code,
declare
l_x varchar2(30);
begin
select username into l_x
        from app_users
    where upper(username) = upper(:P7_USERNAME)
      and password = :P7_CURRENT_PASSWORD;
return (true);
exception
when no_data_found then
    return (false);
end;This code is working fine when the password is stored without encryption,but after encryption it showing error,
because the entering password is simply password and not encrypted so both are different even if the user enters right password,
Please tel me how to encrypt the entering password to compare with existing encrypted password.
Thank you,
Regards,
gurujothi.

Dear Sunil and vdotcherukuri     ,
Thank you for your reply as per your suggestion I tried the following code and its working fine.
declare
l_x varchar2(30);
begin
select username into l_x
        from app_users
    where upper(username) = upper(:P7_USERNAME)
      and password = app_security_pkg.get_hash (TRIM (:p7_username), :P7_CURRENT_PASSWORD);
return (true);
exception
when no_data_found then
    return (false);
end;Thank you,
Regards,
Gurujothi.

File to SOAP (Synchronous) with certificates Encryption and Descryption

Hi,
Can anybody advice me how can I develop the scenario file to SOAP (Synchronous Process) with certificates encryption and descryption.
Thanks,
Naidu.

For file to soap sync scenario without using BPM, you need to use the following adapter modules.
http://help.sap.com/saphelp_nw04/helpdata/en/45/20c210c20a0732e10000000a155369/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/45/20cc5dc2180733e10000000a155369/content.htm
For applying certificates, you need to configure SSL on java stack.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/197e6aec-0701-0010-4cbe-ad5ff6703c16
Regards,
Prateek

MacBook Pro now works with wireless encryption

I am offering my two cents. After spending a morning on the phone with TDS and part of the afternoon with apple yesterday, today I finally have my MacBook Pro talking wireless with an encryption key.
My MBP would connect without an encryption key but would not with an encrytion key. The MBP is 2.16GHz model, with 10.4.9 plus all updates; the GW is an Actiontec GT704-WG.
My original encryption key which did not work was 128bit key 112233445566778899aabbccdd. When this key was in the router and entered onto the MBP it would not connect.
When I changed to 64bit encryption and entered an ASCII ABCDE on the router, then on the MBP entered a 64bit key of 4142434445 (the equivalent hexcodes), everything connected.
I have not tried this method with a 128 bit encryption key.
I hope this helps those who can connect without encryption but not with encryption.
Bruce Kaiser

iCloud technically starts working with Lion, but I recommend Mavericks, because it is a free upgrade (and a more recent one).

Ap521 - 802.1x LEAP - with IAS ?

Hi there,
I wanted to do 802.1x PEAP with my AP521 in standalone access-point. unfortunetely.. in the data sheet it seems to support only LEAP with AP521.
http://www.cisco.com/en/US/prod/collateral/wireless/ps7306/ps7319/ps7338/product_data_sheet0900aecd8060c220.html
LEAP
Dynamic-WEP
Open-EAP Network-EAP
So, as I have Microsoft IAS, I was trying to figure out if LEAP is supported ... it seems that officialy not :
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_q_and_a_item09186a00805e8297.shtml
and from microsoft also
http://technet.microsoft.com/en-us/library/cc785368(WS.10).aspx
But, some people on forum said there is some things you can do to make it work...
https://supportforums.cisco.com/message/1295984#1295984
By default, the access point sends reauthentication requests to the authentication server with the service-type attribute set to authenticate-only. However, some Microsoft IAS servers do not support the authenticate-only service-type attribute. Changing the service-type attribute to login-only ensures that Microsoft IAS servers recognize reauthentication requests from the access point. Use the dot11 aaa authentication attributes service-type login-only global configuration command to set the service-type attribute in reauthentication requests to login-only.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_guide_chapter09186a00802091b1.html
What Do you Think ?? did you guys done that ?
thanks

Phillippe,
PEAP is supported through the APs which is most likely what you will use in a Microsoft environment. This is covered under the Open-EAP heading.
--Jesse

Sum Encrypt does not recognize a copy of a file through linux. How decrypt this file with Sum Encrypt?

Sum Encrypt does not recognize a copy of a file through linux to Mac 0S9. How decrypt this file with Sum Encrypt?

Hello, and welcome to Apple Support Communities!
I am not familiar with the program that you list, however files in OS 9 use things called Resource Forks (rather than file extensions) for filetype and creator.
If you sent a file through Linux these resource forks probably got stripped and now the file is nothing to your Macintosh.
It is best to BinHex your files (.hqx) before leaving the HFS file system so that their resource forks are preserved.
Regards,
Ryan

How to compare the texted password with the encrypted password of dba_users

Hi,
I have Oracle 10g in my system. I know dba_users table has information of all the created users of the oracle, along with their encrypted passwords.If I want to make a login page based on this table ,how could I compare the password in that case?
In above situation, I am getting the username with the regular texted password for authentication check. How can we checked this texted password with the encrypted password of dba_users, for the respective username?
Your input would be appreciated.

Try use the username/password from login page to create an connection to database.

Key Lenght too short error with dbms_crypto.encrypt

Hi Friends,
I am getting above mentioned error with dbms_crypto.encrypt.
I had created a thread in technology --> security forum but i am not getting any help from there.
ORA-28234 Key Length too short with dbms_crypto.encrypt
Appreciate if anyone help me resolve this issue.
Thanks
AT

Hi Warren,
Yes function is compiled without any compilation error.
Thanks
AT

Help With ASE Encryption

Hello friends,
Can anyone out there tell me or point me to information on how to set up the ASE_ENCRYPTION option for version 15.7?
I have an existing ASE installation for testing purposes. I want to install the encryption option there but I cannot locate any
step-by-step documentation on how to do that. The ASE 15.7 Encrypted Columns Users Guide simply states:
"Install the license option ASE_ENCRYPTION. See the Adaptive Server Enterprise Installation Guide."
and when I go to the ASE Installation Guide it refers me to the SySam User's Guide...
and when I go to the SySam User's Guide it gives no instructions on *how* to install the encryption option.
So, to summarize:
1.) Do I need to generate a license file that includes the ASE_ENCRYPTION option and start ASE with this license file? I was
told by someone at SAP that there should be a way to get and use this option for thirty days (grace license) while we test
and evaluate.
2.) If above is true, will this work with the Developer's Edition of ASE or do I have to get a Enterprise Edition SR or SV
license? (By the way, I do have an available SV license for Enterprise. I generated the license file and it shows that this license includes
a package of Components= ASE_CORE Options=SUITE)
Any help with this will be appreciated.

Thanks for your help Ajit,
I believe you are correct. I was told that the ASE_ENCRYPTION option was already packaged with the software so all I had to do was "turn it on". For some reason I was thinking it had to be installed via a script or something.
Anyway, I have successfully "turned on" the option using :
sp_configure "enable encrypted columns", 1
go
I will now attempt to create an encryption key and go forward with data encryption.
Thanks again for your input

Sharing Internet with AirPort - Encryption doesn't work

Hi!
With my new iMac, I try to share my internet connection but I want it to be encrypted so my neighbors can't use it! I am using a 128-bit WEP encryption with a 13-character ASCII key. However, my Windows PC can't seem to connect to the network, while it can when the network is unencrypted. It can also manage it with other encrypted networks. I'm new to Macs, so maybe someone can tell me if I'm doing something wrong? If it's important, I have a D-Link Wireless 802.11 b/g 108 Mbits USB Adapter. Thanks in advance,
Mac_swede

This will not solve why you are having your problem, but, have you tried setting up the encrypted network on the Windows PC and then tried to join it from the imac? I am not sure, but you may also need to have sharing active to allow other compters onto your network. Also, as an afterthought, for further protection, we don't have our router broadcasting the network name. So in order to join, one must know both the name of the network and the encrypted password to get in. The last thing I can think of is that on my network setup (mac os X 10.3.9) there are more than one WEP encryption setting. You may need to use the one that is compatible with the Windows PC.
I am just shooting in the wind here, so take my words with a grain of salt.
Travelrn
ibook Mac OS X (10.3.9)

[SOLVED] Installation with LUKS encryption--ok to grub, then black s..

Installation with LUKS encryption--ok to grub, then black screen
I'm trying to install ArchLinux onto an existing Luks encrypted HDD, formerly dual boot with Fedora 17.
First,I left the Windows partition unchanged and erased the root partition. Then I booted to the ArchLinux, mounted and decrypted the LVM encrypted volume group partitions and followed along with the Beginner's Guide Installation Instructions. This progressed without a hitch; near as I can tell. I can boot to grub select kernel interface, but no further.
So I forgot something...the encrypted volume. I found the archLinux page dm-crypt with LUKS and tried my best to follow along encouraged by the first line, "The installation of a LUKS-encrypted system is largely the same as installing an unencrypted system."
And that's where I stand. I edited the grub.cfg to boot to run level 3, but the kernel doesn't seem to load at all and never starts to give me the chance to enter the password. So now I'm not sure if its the LUKS encryption after all. (maybe its my _next_ problem)
Any ideas?
Last edited by xtian (2013-09-17 22:03:48)

Sure, here's the layout,
# lsblk -fa
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 vfat xxxx-xxxx
├─sda2 ext4 xxxxxxxxxxxxxxxxxxxxx /boot
└─sda3 crypto_L xxxxxxxxxxxxxxxxxxxx
└─luks-93xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx (dm-0) LVM2_mem xxxxxxxxxxxxxxxxxxxxxxx
├─cryptVG-root (dm-1) ext4 xxxxxxxxxxxxxxxxxxxxxxxxxxxx /
├─cryptVG-swap (dm-2) swap xxxxxxxxxxxxxxxxxxxxxxxxxxxx [SWAP]
├─cryptVG-home (dm-3) ext4 home xxxxxxxxxxxxxxxxxxxxxxxxxxxx /home
└─cryptVG-local (dm-4) ext4 local xxxxxxxxxxxxxxxxxxxxxxxxxxxx /usr/local
I left sda1 alone. Reinstalled on sda2 (/boot) and sda3 (cryptVG-root). I also remade swap. I didn't see an opportunity to set /usr/local, so I may simply free up this space after copying the data. But for home I set up a sub directory for the new install and left the old user in place (something I've been wanting to accomplish for some time as anaconda is not so nice to old user files).

Hello, I have a WRT54G FW 2.02.7 with WPA-encryption. I...

Hello,
I have a WRT54G FW 2.02.7 with WPA-encryption.
I received from my company a WRE54G.
On the back, it says only Model No. WRE54G,
Serial No. MGB004A25987.
They bought this article in Nov 2004.
Can I still upgrade the Firmware so I can use WPA-encryption.
tia.

yes .. you can upgrade the firmware of the wre54g...

Suspecting Crucial Momentum Cache incompatible with Symantec Encryption (PGP)

Hi... My Windows 7 x64 has beening geting BSOD with error code STOP:0x0000007F PGPwded.syswith some random file corruption 2-4 times a day. I'm suspecting that Crucial Momentum Cache is not compatible with Symantec Encryption (PGP)because after I disabled the Momentum Cache then no more BSOD at all for almost 2 weeks now.

Hi Kanuki,
Thanks for your question.
First of all I'm sorry to hear that Momentum Cache is not working with your encryption. I have looked in to this and this is not something that we have come across before. Due to this I have passed your comments on to our tech lab to investigate it further.
Once they get back to me with a reply I will update you on this thread. I am sorry for the delay but as it's a rare situation I wanted to get it fully investigated. If you do have any other questions at all, please don't hesitate to ask and I would be more than happy to help.

LEAP with CKIP Encryption?

Similar Messages

Maybe you are looking for