Lenovo T410 - issue with i5 520M integrated graphics

Hi,
I recently installed Arch on a Lenovo T410. Following the guides in various wikis (Archwiki, ThinkWiki) I was able to configure everything without too much troubles...
But I have the feeling that the the integrated graphics chipset is not perfectly handled. I get this feeling when I run glxgears:
$ glxgears
307 frames in 5.0 seconds = 61.224 FPS
298 frames in 5.0 seconds = 59.490 FPS
299 frames in 5.0 seconds = 59.688 FPS
299 frames in 5.0 seconds = 59.688 FPS
These are the relevant outputs of lshw:
$ lshw -class display
*-display
description: VGA compatible controller
product: Core Processor Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 02
width: 64 bits
clock: 33MHz
capabilities: vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:32 memory:f2000000-f23fffff memory:d0000000-dfffffff(prefetchable) ioport:1800(size=8)
$ lshw -class processor
*-cpu
product: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz
vendor: Intel Corp.
physical id: 1
bus info: cpu@0
size: 1199MHz
capacity: 1199MHz
width: 64 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt aes lahf_lm ida arat tpr_shadow vnmi flexpriority ept vpid cpufreq
And this is my xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "ServerFlags"
Option "DontZap" "false"
Option "AutoDevices" "true"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "extmod"
Load "glx"
Load "dri"
Load "dbe"
Load "dri2"
Load "synaptics"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Core Processor Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 24
Modes "1440x900"
EndSubSection
EndSection
Any ideas or suggestions will be welcome, also I would like to know if there are any relevant resources on the internet concerning integrated chipsets and the implementation status of the linux drivers.
Thanks,

If your hardware is bleeding edge it's very likely to not yet be fully supported. In the case of Clarkdale/Arrandale i believe support is added in 2.6.33.
I suppose you could find that information by searching the forum for clarkdale, by browsing http://kernelnewbies.org/Linux26Changes or asking in irc / forums / usenet. But tbh i can't find much information about Clarkdale either.
For comparison though, i have ~800 fps on my Thinkpad X200s and 1100 fps on my i3-530 machine (Clarkdale) with kernel 2.6.32.10. Kernel 2.6.33.2-1 (testing repository) gives me ~800 - 900 fps.
Regards,
demian
Last edited by demian (2010-04-08 11:21:49)

Similar Messages

  • Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

    Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
     What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
    Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
    I have tried these:
    1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
    2. I tried putting back my old 2.5" and nothing but black screen.
    Thoughts and suggestions?
    Solved!
    Go to Solution.

    Hi Autoexit173,
    Welcome to Lenovo Community!
     As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
    As you have mentioned that the system not booting, please try to remove the RAM and  turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
    Click here for the steps to remove the RAM and refer page number 40.
    Hope this helps. Do post back if issue persists!
    Best regards,       
    Ashwin.S
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • No DVI output with T420 on integrated graphics card and Mini Dock Series 3

    Because of some application problems I have to set my new T420 to only use the integrated graphics card (disabling the NVidia Optimus feature). In this configuration I seem to be unable to use the DVI port on the Mini Dock Series 3, there is simply no signal and Windows reports that no monitor could be found. The VGA output works but the picture quality is quite bad.
    Is this a known design limitation or do I deal with a driver issue?
    Thanks
    Dan

    Yes, that works but there is the drawback of battery life. In the course of the day I often undock the laptop to go to meetings and using the discreet graphics card uses a lot more power and significantly reduces the time i can work without power. I would have to restart the laptop and change the setting in the BIOS after I undock, which is just not practical. For what I do I don't need the graphics power of the discreet card.

  • Authentication issue with Xcelsius/Portal integration

    I am facing an issue with the way we have integrated our Xcelsius dashboard with our corporate portal. I know this probably is more of a SDK question than Administration, but I figured I will ask it here anyway since Tim and some others are diverse enough in their knowledge base. This might be LONG post but please advise if anyone has any good pointers.
    We have an Xcelsius dashboard that needs to be served up via our corporate intranet (based on MS Sharepoint 2007). Now we are NOT using the MS Sharepoint Portal Integration Kit, but just doing a basic integration of the SWF call within a web part on Sharepoint. All this means is that within a portlet (web-part) on Sharepoint, I am making a HTTP call to the openDocument URL to invoke the SWF file. So the SWF is actually served up from our Tomcat App Server, and displayed onto this frame within the portal. That is the basic idea.
    To achieve this, what I did was write some custom code using the Java SDK to modify the openDocument a little bit. By doing so, I was able to insert some behind-the-scenes-login code wherein no matter who the portal user (Win AD-based) is, he is logged in to BOE as a generic "dashboard-user" and the dashboard is served up. This worked fine for the first dashboard where all we had was SWF and some WebI linking using openDocument (no full-InfoView access).
    But in this second dashboard now, what we also have is a hyperlink for users to get to InfoView to do Ad-hoc reporting. What this does is open a child browser window from within the portal (dashboard) --- and it remembers the BOE session for the generic user id "dashboard-user" and logs the end-user in to InfoView using that. But what I actually want is that the end-users, on this new window, should only be prompted at the traditional InfoView logon screen where they can manually enter their Windows AD password and get in. Thus, I would like to keep the dashboard SWF page session separate from the InfoView ad-hoc session, which I cannot seem to do because of the browser relationship and session maintenance.
    I am trying to find a way where I can simulate a single sign-on for dashboard viewers on the portal, but at the same time let them jump off to InfoView as themselves.
    Any thoughts on how I can do this?
    Notes:
    We DO NOT have Single Sign-On enabled for InfoView
    We are using Windows AD authentication (manual, no SSO)
    We are on Tomcat

    Sarang Deshpande wrote:
    1) If the InfoView app on Tomcat (desktoplaunch) is configured with Vintela, openDocument calls from the portal with automatically work using behind the scenes SSO, correct?
    in XIR2 everything that falls under infoview should SSO when infoview is setup for SSO (not the case in XI 3.x)
    Sarang Deshpande wrote:
    2) What is the best practice when it comes to the service accounts needed? I have implemented Windows AD manual auth already so I have a service account that use for that. Should I be using the same on and making vintela/SSO-specific changes to it...or should I have a separate vintela service account and deal with two different ones..each for a diff purpose?
    There is no best practice per se but the less service account the lower your chances to duplicate an SPN, functionally everything seems to work just as well with multiple as it does with 1 (of course with 1 there is less management work) If you click the SSO link in my forum sticky post I have a section explaining this with some suggested methods of deploying a service account(s)
    Sarang Deshpande wrote:
    3) Other than some minor browser configurations that might be required, is there anything else that I should communicate to the team about what might be required to be "pushed" to users' PCs?
    Using the default config nothing should be required on the client machine (unless SSO has been disabled in the browser or you intend to use a url that contains a period ..... (i.e. FQDN or IP) with hostname URL (the default) it should just work.
    To note if you have XP SP2 or older there is a microsoft spnego bug you may need to apply a fix if you aren't patched to SP3 (about 5% of our customers run into this).
    Regards,
    Tim

  • Issue with Office 365 integration module

    I have an issue with the Office 365 integration module on one of my customer's Windows Server 2012 Essentials servers.
    Recently they switched to a new Office 365 plan, but the integration module still thinks the customer is on the old plan. This doesn't seem to affect functionality at all, so I think it's just cosmetic. On the Office 365 tab of the Windows Server Essentials
    dashboard, under Subscription it lists the old plan and says the subscription has expired. Under Licenses it says "your subscription includes 0 licenses" and "0 licenses are assigned to user accounts."
    Steps I've tried to resolve this issue:
    Created a new Office 365 test user account (after switching plans) and then on the Windows Server 2012 Essentials dashboard clicked 'Change the Office 365 administrator account.' This made no difference.
    Uninstalled and then reinstalled the Office 365 integration module. Again, this made no difference.
    I suspected there might be an issue in the Office 365 back-end, where the customer's Office 365 account was somehow still associated with the old plan, but they said that wasn't the case.
    I opened a service request with Office 365 support about the issue with the server dashboard, but this was their response: "As we are online service support team, we provide limited support on local application extension...you may need to contact the
    Windows Server support team for further help."
    As it seems to be just a cosmetic issue, I'm not going to open a paid service request with the Windows Server support team, but I'm interested to know if anyone on the forum has struck this issue before or has any suggestions.

    Not seen this issue myself, you may be right in that it Is just a cosmetic issue, and I would be surprised if a fix was forthcoming even if you opened a case (or we opened a case for you) due to resources having shifted to the Windows 10.
    You could grab the OIM logs from programdata\windowsserver\logs and we can see if there is anything obvious in there.
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Issue with SIEBEL - XI Integration with SOAP

    Hi,
    I have an issue with the integration of SIEBEL and XI via SOAP.
    In the scenario Siebel calls a synch Web Service on XI. The provided WSDL was implemented on Siebel and when Siebel calls the Web Service the message is received correctly by the XI SOAP Sender Adapter and I can see the message in the Message Monitoring (SXMB_MONI).
    The issue is during the mapping as the payload does not seem to comply with the structure XI expects in the message interface. When I load the payload of the SOAP Request send by Siebel into the Message Mapping Test Tool, all fields below the Message Type are in red. I found out that the problem lies in the way the namespace is addressed.
    The payload I receive from Siebel that is not working in the mapping looks like this:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <MT_KUNDE_CRM xmlns="http://www.xyz.de/ariva/Kunden" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    - <KUNDE>
    - <Account>
      <CRM_Account_ID>1-S3YU</CRM_Account_ID>
      <Customer_Segment>Other Account</Customer_Segment>
      <Target_Market>Other Markets</Target_Market>
      <Currency>DEM</Currency>
      <Inactive_Account>N</Inactive_Account>
      <Country />
      <Account_Name>ATK Test Company 1</Account_Name>
      </Account>
    - <Account_Address>
      <Country>England</Country>
      </Account_Address>
      </KUNDE>
      </MT_KUNDE_CRM>
    The structure that works looks like this:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <kun:MT_KUNDE_CRM xmlns:kun="http://www.xyz.de/ariva/Kunden" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    - <KUNDE>
    - <Account>
      <CRM_Account_ID>1-S3YU</CRM_Account_ID>
      <Customer_Segment>Other Account</Customer_Segment>
      <Target_Market>Other Markets</Target_Market>
      <Currency>DEM</Currency>
      <Inactive_Account>N</Inactive_Account>
      <Country />
      <Account_Name>ATK Test Company 1</Account_Name>
      </Account>
    - <Account_Address>
      <Country>England</Country>
      </Account_Address>
      </KUNDE>
      </kun:MT_KUNDE_CRM>
    The ony difference between the two is that the second messages uses a prefix (kun) for the namespace while the first does not use it, although it is correct from an XML syntax perspective.
    Can anybody help?
    Thanks in advance.
    Alex

    Hi
    Why don't you try and create a schema (XSD) which will prefix kun to the input, instead of using the message type created by XI.
    Just a suggestion.
    regards
    Sameer

  • Problem with nvidia and integrated graphics

    I'm having graphics problems with my notebook. I installed the latest Nvidia 820m drivers but still 3d apps are very slow.m Also inside dxdiag it shows that the integrated graphics has only 265mb. Is there something wrong? I just bought the machine. [url=http://postimg.org/image/hj4rk182d/][img]http://s10.postimg.org/hj4rk182d/image.jpg[/img][/url]

    lovelaze wrote:
    karol wrote:Have you tried https://wiki.archlinux.org/index.php/Bumblebee ?
    Thanks. I will give it a try tomorrow.
    Is it meant to have both the Intel and Nvidia drivers installed?
    Sort of. You don't install the regular nvidia drivers package but the bumblebee one.

  • Photoshop CS5 OpenGL support with latest Intel integrated graphics?

    Intel's latest "Sandy Bridge" CPUs (Core i5 2500, Core i7 2600, etc.) included much-improved integrated GPUs, thus allowing for systems that do not require a discrete graphics card.  Although not suitable for high-end gaming, the specs appear to be more than enough for Photoshop CS5's GPU acceleration needs.  Can anyone confirm or deny that CS5 will be able to take advantage of the new Intel HD 2000 and HD 3000 graphics?  The driver specs say it supports OpenGL 3.0 and Shader Model 4.0, both of which satisfy the minimum requirements of OpenGL 2.1 and Shader Model 3.0 for Photoshop CS5.
    I'm 99% sure the latest hardware is supported, as Adobe's own document mentions "Intel HD Graphics", just not the specific model numbers.  The document was also last updated in November 2010, before the current series of CPUs were released to the public.
    http://kb2.adobe.com/cps/404/kb404898.html
    Comments?

    function(){return A.apply(null,[this].concat($A(arguments)))}
    BrianTao wrote:
    Surely those won't stress an OpenGL implementation that is aimed to work in scientific visualization apps, model rendering, 3D games, and so on?
    Having implemented my own OpenGL applications over the past several years, I can tell you that it's absolutely not that simple.  The word "surely" cannot be applied here.
    Photoshop, in displaying 2D things with a 3D system, is NO DOUBT using OpenGL differently than any other application has ever used OpenGL.  It's the nature of the beast.  What they put in which type of buffers at what time in which mode using what calls in which order and using what performance features are all open choices.  The software itself makes choices at run time about what parts to use based on OpenGL version and advertised capabilities.  Plus they're using Shaders (on-GPU programming), and there are a bunch of different ways to get that done as well.
    In order for a system to run perfectly, the applications and video driver / GPU subsystem have to get things exactly right all the time every time, and not just for Photoshop but for all the other apps (and Aero) as well.  Though Intel and the others may do plenty of testing, what might work on a test bench might not work when combined dynamically with other things in ways that only happen on an end-user system.  Note the number of video game bugs fixed in each driver release.
    However complex you think OpenGL is, multiply that by 100 or more and you may be getting into the ballpark.
    -Noel

  • Issue with EP KM integration with Business Objects

    Hi,
    We have integrated BOBJ with EP KM and are able to view the Business object repository (Inbox, MyFavorites & Root Folder) in KM.
    The issue is when a webi document is added to My Favourites in Business object Infoview, the same is not reflecting in the EP KM. It takes around 30 mins to show the latest content in KM
    Any clue on this.? While configuring BOBJ repository manager in KM, we dont specify any cache or pull mechanism to fetch the latest webi documents from BOBJ. Am I missing some configuration from portal end.?
    Thanks,
    Siva

    Any clue on this. I am still facing this issue and haven't got any work around.

  • T410 issues with docking station USB on XP

    Hello all
    we are deploying the T410 with the docking stations and we are finding that many are getting blod, or freezing when they are docked and are booting up. When they have a USB device plugged in. 
    I can't locate the issue specifically, as it's happening with USB printers, wireless mice, external monitors using the DVI->USB adapters.
    I see there are drivers for USB in vista on the drivers download page, but none for xp
    thoughts or directions here.
    thanks

    hey redfox707,
    which docking station would this be ?
    also this does not happen if there is no usb devices plugged in ?
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Microsoft OEM Software(MLK) from Lenovo Fulfillment Issues with DDNi

    I ordered Microsoft Office Small Business 2010 W/MS Office Professional 2007 license through Lenovo for my Ideapad.  Only a trial Key shipped, it looked like a credit card with the 25 digit key, shipped from DDNi(fulfillment) but no other key came.  DDNi tells me something shipped and it is their experience that the end user just misplaced it.  DDNi's solution is to tell me via an anonymous customer support email to take it up with UPS. Who can I talk to to correct this?  DDNi tells me to talk to UPS.  They don't hold onto license key records and can't simply give me my 25 license key code. Microsoft is pointing me back to Lenovo.  Meanwhile, my 60 day license is expired and I'm losing all productivity.  With the run around I'm getting from DDNi and MicroSoft support, I'm looking at downloading freeware to replace what I've legitimately paid for.

    I ordered Microsoft Office Small Business 2010 W/MS Office Professional 2007 license through Lenovo for my Ideapad.  Only a trial Key shipped, it looked like a credit card with the 25 digit key, shipped from DDNi(fulfillment) but no other key came.  DDNi tells me something shipped and it is their experience that the end user just misplaced it.  DDNi's solution is to tell me via an anonymous customer support email to take it up with UPS. Who can I talk to to correct this?  DDNi tells me to talk to UPS.  They don't hold onto license key records and can't simply give me my 25 license key code. Microsoft is pointing me back to Lenovo.  Meanwhile, my 60 day license is expired and I'm losing all productivity.  With the run around I'm getting from DDNi and MicroSoft support, I'm looking at downloading freeware to replace what I've legitimately paid for.

  • Issue with FDM Import Integration script

    Hi,
    I need to pull records from Oracle DB and load in FDM. have created Import Integration script for this. But,I reciev 'Data access error' when I execute the script.
    The line of error is Set rsAppend = DW.DataAccess.farsTable(strWorkTableName)+ .When I review log, I see 'strWorkTableName' is Invalid table name.
    ERROR:
    Code............................................. -2147467259
    Description...................................... ORA-00903: invalid table name
    Procedure........................................ clsDataAccess.farsTable
    Component........................................ upsWDataWindowDM
    Below is the script:*
    Dim cnSS 'ADODB.Connection
    Dim strSQL 'SQL string
    Dim rs 'Recordset
    Dim rsAppend 'tTB table append rs object
    'Initialize objects
    Set cnSS = CreateObject("ADODB.Connection")
    Set rs = CreateObject("ADODB.Recordset")
    Set rsAppend = DW.DataAccess.farsTable(strWorkTableName)
    'Connect to Oracle database
    cnss.open "Provider=OraOLEDB.Oracle.1;Data Source= FDMDB;Database= FDMDB;User ID= FDM;Password= xxxx"
    'Create query string
    strSQL = "Select ACCOUNT,ENTITY,AMOUNT FROM BALANCES"
    'Get data
    rs.Open strSQL, cnSS
    'Check for data
    If rs.bof And rs.eof Then
    RES.PlngActionType = 2
    RES.PstrActionValue = "No Records to load!"
    Exit Function
    End If
    'Loop through records and append to tTB table in location’s DB
    If Not rs.bof And Not rs.eof Then
    Do While Not rs.eof
    rsAppend.AddNew
    rsAppend.Fields("PartitionKey") = RES.PlngLocKey
    rsAppend.Fields("CatKey") = RES.PlngCatKey
    rsAppend.Fields("PeriodKey") = RES.PdtePerKey
    rsAppend.Fields("DataView") = "YTD"
    rsAppend.Fields("CalcAcctType") = 9
    rsAppend.Fields("Account") = rs.fields("Account").Value
    rsAppend.Fields("Entity") = rs.fields("Entity").Value
    rsAppend.Fields("Amount") = rs.fields("Amount").Value
    rsAppend.Update
    rs.movenext
    Loop
    End If
    'Records loaded
    RES.PlngActionType = 6
    RES.PstrActionValue = "Import successful!"
    'Assign Return value
    SQLIntegration = True
    End Function
    ===========================
    Also, Is the below string correct to connect to Oracle DB:
    cnss.open "Provider=OraOLEDB.Oracle.1;Data Source= FDMDB;Database= FDMDB;User ID= FDM;Password= xxxx"+
    Thanks in advance
    Edited by: 995155 on Mar 20, 2013 12:45 PM

    I am assuming you originally tried to run the script in workbench. for these type of scripts this is not possible as you get the error you highlighted.
    If it ran successfully (albeit without pulling any data,) then it might just be the SQL string that is incorrect.
    What i would try is:
    1. Add some error handling after the connection to the DB and display the error if it occurs
    2. display the SQL string you are using to make the Selection on, to ensure the format is ok.
    Edited by: user10757003 on 21-Mar-2013 01:34

  • Issue with Essbase adapter Integration

    Hi Experts,
    I have installed & configured Essbase adapter ES11X-G4-H in Workbench client. I am able to map the Taget Dimensions in workbench but when I move to FDM webclient >Activities>Map>TargetEBAccount and browse for target values I recieve "Error: Essbase API Procedure: [EsbInit] Threw code: 1030803 - .At Line: 124"
    Variable values:
    Path:
    E:\Oracle\Middleware\EPMSystem11R1\bin-32;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Server;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Client;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Common;E:\Oracle\Middleware\EPMSystem11R1\common\SAP\bin;F:\app\client_64bit\11.2.0\bin;E:\app\sunaina.taneja\product\11.2.0\client_32bit\bin;E:\app\oracle\product\11.2.0\dbhome_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\PROGRA~2\PROACT~1\Agent\server\bin;E:\Oracle\Middleware\ohs\bin;E:\Oracle\Middleware\ohs\opmn\bin;E:\Oracle\Middleware\ohs\opmn\lib;E:\Oracle\Middleware\ohs\perl\bin;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\common\JRE\Sun\1.6.0\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient-32\bin
    ESSBASEPATH: E:\Oracle\Middleware\EPMSystem11R1/common/EssbaseRTC/11.1.2.0
    I am working on version 11.1.2.1. Please suggest the possible resolution.
    Thanks
    Shipra
    Edited by: user10491593 on Oct 17, 2012 10:31 AM

    Thanks for your reply. As you suggested
    On 64bit system
    <EPM_Oracle_Home>\bin-32;%ESSBASEPATH%\bin;<EPM_Oracle_Home>\Products\Essbase\EssbaseClient-32\bin
    Path variable set accordingly as I mentioned in my first post:
    starting with:E:\Oracle\Middleware\EPMSystem11R1\bin-32;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0\bin
    ends with: E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient-32\bin
    Please let me know if I am getting this wrong.

  • Issue with WEBGUI while integrating transaction 'UCMON' in EP7.0

    Hi,
    I have created a transaction iView to web enable BCS TCODE 'UCMON'.I am able to connect to the BI System and see the webgui in my portal.But my entire UCMON functionality depends on the context menu which i am not able to get when i right click on one of the columns in the webgui.
    I am using EP7.0 along with BI 7.0 and have already applied basis SP 14.Is this a limitation with WebGUI,if yes,how can i replicate this TCODE functionality in portal??Also is it possible to get the TOP Menu from the SAP GUI to web gui??
    Thanks,
    Manu
    Edited by: Manu Khetan on Apr 21, 2008 8:39 AM

    If you already have the header, I don't see the problem. The Edit and Goto menus appear in the drop down menu called Menu.
    Right clicking should work fine as well.
    If you don't see the Menu.....menu, then you are not getting the full header.
    You should set the parameter I mentioned previously in the webgui service in ICF. To do this, go to t-code SICF - just hit execute. Browse to default_host > sap > bc > gui > sap > its > webgui. You can set the parameter when you click on the GUI Configuration button.

  • Issues with Excel files containing graphics

    I have a large excel 2013 spreadsheet containing several 3D graphs.  It is 79 pages long.  I am using Adobe Acrobat 9 on windows 7.
    When attempting to convert to PDF, once Acrobat reaches page 23 it stops working.  Pages 23-79 come out blank.
    When I look at the page preview, I can see all pages just fine.  I also have not manually inserted any page breaks within my excel document.  I've read somewhere that manual page breaks may cause Acrobat to act buggy.
    I've also attempted to converting on other computers:
    Windows 7
    Acrobat XI
    Windows 8
    Acrobat 8
    All combination of versions and systems are procuding the same result.  Possibly a memory time-out issue?  All of my computers have at least 4 gigs od RAM and 3 GHz processors.  One is 32-bit, the other two are 64-bit
    I've used the method of choosing the Adobe PDF Printer, printing within Excel and Printing Directly from Adobe Acrobat Distiller... all attempts have failed.

    >Ever since I upgraded my OS to Mavericks
    Adobe/Jive have a BAD title for the SEARCH THIS FORUM function
    Go to http://forums.adobe.com/community/premiere and, in the area just under Ask a Question, type in
    maverick
    or
    mavericks
    You may now read previous discussions on this subject... be sure to click the See More Results at the bottom of the initial, short list if the initial list does not answer your question

Maybe you are looking for