Leopard 10.5.2 can't find Epson Stylus C86 printer driver

I installed Leopard and now when I try to print the dialogue says no printer selected.
When I go to Print/Fax preferences and select Epson Stylus C86, which is on the list,
the working wheel appears and it says searching for new drivers .
But it keeps searching and never stops. I can't print anything.

Thank you for your help. I discovered the answer in Print & Fax preferences by choosing "Default Printer".

Similar Messages

  • Epson stylus 3850 printer driver

    am looking to switch to an imac from a pc but have an epson stylus 3850 and cannot find any mac drivers? HELP!!!

    I would second Greg's opinion. If you are tied to all the capabilities and interface of the Epson supplied drivers for Windows, the Gutenprint drivers may not fulfill your needs. If you are a professional that needs exacting color matching, you may have a hard time zeroing in on that with the Gutenprint drivers.
    On the other hand, if you want to use the printer on a network, even if Epson supplied drivers they would not work in a network environment. The Gutenprint drivers will work on a network.
    One other possibility not previously mentioned are the commercial PrintFab drivers <http://printfab.com>. They may provide results that you feel are better than the Gutenprint drivers even if they are just a tad short of the quality of the output of Epson drivers.
    Matt
    Mac Mini G4; B&W G3/300    

  • I can't find HP LaserJet 1100 printer driver.

    I got My Mac to "see" my PC's shared folder and I'm so excited. Then I tried to print but it didn't have my print driver: the HP LaserJet 1100. Is there some way to get it or some other way to make it work?
    Thanks.

    No I am. I started to answer a different question. Sorry. If I could delete my post I would have.

  • HT4356 I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc.  How do I print just 1 page out of 14 pages .  I don't see any settings on my iPod and can't find settings on the printer .   Can someone help with this

    I'm using my iPod and an Epson XP-810 printer to print pages from websites and emails and etc. 
    How do I print just 1 page out of 14 pages . 
    I don't see any settings on my iPod and can't find settings on the printer .  
    Can someone help with this problem

    Google show that you have to cut what you want to print and then paste it into a new app and print from that app.
    http://www.ipadforums.net/new-member-introductions-site-assistance/63145-printin g-one-page-ipad-2-a.html

  • My mac snow leopard 10.6.8 can not find my 3050a printer wireless

    My mac snow leopard 10.6.8 can not find my 3050a printer even though i have added the printer bonjour to my print list, even though the blue and white light s are on on the printer panel.
    I have good signal strength
    the printer ip is 192.168.1.8
    Help

    OK, using these instructions: https://www.broadbandadvice.org.uk/Website/Routers/HG532.htm  change the channel to 11.
    Now, if and when the printer is connected with a vaild IP address, let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

    i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

    Care to share which OS you are using?

  • I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say install to Applications but it's not there. How do I find it and can I put it in my dock?

    I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say it would install to Applications, but it's not there. How do I find it and can I put it in my dock?

    In Safari's preferences:
    Look in the folder displayed where you see the arrow. The actual Downloads folder is found in your Home (user) folder.

  • How can one find out how much hard drive space the apps and media are using?

    how can one find out how much hard drive space the apps and media are using?

    See Here  >  Where did my Disk Space go?
    And Here  >  The Storage Display

  • RT: Remote desktop says "can't find a suitable device for drive C"

    Hello,
    there is a french post on exactly the same topic, but I can't apply the solution given there.
    My problem is the following: I have a remote desktop prepared to work as RT target. It has been checked for compatibility, the hard drive has been formatted in FAT32 format, it has been found by my host and has been assigned a static ip address. I have installed the software I need ( LabView 9.0 RT) using MAX. Now, when I try to boot it with the option "boot using software installed into the hard drive", all I get is the message
    "Can't find a suitable device for drive C"
    I have reseted the BIOS, have tried formatting the hard drive in the other format, uninstalled and reinstalled the software, tried to start the target pc without the usb stick, but nothing seems to work.
    Do you have any ideas about what is going wrong?
    Thank you,
    Samuel
    Solved!
    Go to Solution.

    So you've got a IDE (and not SATA) hard drive? That should be supported anyway.
    That would only confirm my experience... it's hard to find hardware compatible with LV RT. Before buying you cannot know if it's compatible. Once you have it the evaluation tool might tell you it's supported but still it might not work. I tried several motherboards in the last years, most of them did not work.
    Your best bet might be to use relatively old hardware.

  • Printer Driver for Epson Stylus R800 Printer Included with OS X 5 Leopard

    How many faulty drivers may there be included with OS X 5 Leopard?
    After installing OS X 5 Leopard I found that when using my Epson Stylus PHOTO R800 printer photograph prints and ordinary lettering were extremely feint and unusable.
    From the list of printers installed with OS X 5, as given in Apple "K"base Documents, I checked the version number of the driver for the Stylus Photo R800 and it was given as "SPR800 3.09 app"
    I next checked the latest driver specified by Epson on their website---it too was given as
    "SPR800 3.09 app".
    Despite this information I downloaded the "SPR800 3.09 app" from Epson and installed it and the problem was solved.
    I am writing this to inform others that despite the driver included with OS X 5 being specified as
    "SPR800 3.09 3.09" it certainly is not!!!
    The only answer is to use the latest version provided on the Epson website.

    Dear scb
    Many thanks for taking the time to reply to my post, you are so right in your remarks.
    Although I've been on Macs for around 25 years I hadn't come across something as blatant as this before---maybe I've been lucky!
    Your comment regarding the avoidance of software included with the product is very relevant particularly at the present time, so soon after the release of OS X 5 Leopard. There must be thousands of printers and the like which are being sold right now with software applicable to OS X 4 Tiger included with them.
    DLS

  • Where can I find a sql server 2000 driver which supports JDBC 2.0?

    Where can I find a sql server 2000 driver which supports JDBC 2.0?
    Thanks!
    Paul.

    Here is another.
    http://www.datadirect-technologies.com/download/downloadindex.asp
    The JDBC 3.0 driver will work in a JDBC 2.0 environment (i.e with J2SE 1.2 or 1.3)
    provided you use only JDBC 2.0 features of the driver
    "Sree Bodapati" <[email protected]> wrote:
    >
    >
    http://msdn.microsoft.com/downloads/default.asp?URL=/downloads/sample.asp?ur
    l=/msdn-files/027/001/779/msdncompositedoc.xml&FinishURL=%2Fdownloads%2Frele
    ase%2Easp%3FReleaseID%3D38312%26area%3Dsearch%26ordinal%3D1%26redirect%3Dno
    Microsoft.com downloads :)
    http://www.inetsoftware.de/English/Produkte/JDBC_Overview/ms.htm
    www.inetsoftware.de
    are a couple.
    sree
    "pronane" <[email protected]> wrote in message
    news:[email protected]..
    Where can I find a sql server 2000 driver which supports JDBC 2.0?
    Thanks!
    Paul.

  • Where can i find windows 7 64 bit driver for macbook pro 8,1 ?

    Where can i find windows 7 64 bit driver for macbook pro 8,1 ?

    Boot Camp Assistant 4.x in Lion
    Apple Boot Camp Support

  • I have Fujitsu scanner Gi-5110c that came with acrobat 7 standard. I just purchased new desktop computer but I can't find my acrobat 7 standard driver cd. I like to know how I can download the driver to my computer.

    I have Fujitsu scanner Gi-5110c that came with acrobat 7 standard. I just purchased new desktop computer but I can't find my acrobat 7 standard driver cd. I like to know how I can download the driver to my computer.

    Because it was valuable software it was never downloadable; also it was a special "OEM" version that could I think only be installed from that CD.
    Acrobat 7 doesn't work properly on Windows 7 and later anyway.

  • MacBook Air can not find canon f8500 series printer on network.

    MacBook Air running OS X Yosemite can not find Canon MF8500 series printer on wireless network. AirPrint is turned on at printer. iPhone iOS 8.2 can not AirPrint to printer as well. Recently switched from Verizon to Comcast for internet service, no issues before switch. Tried to add printer via IP address, it was located but could not print to printer.

    If you haven't done so already, try resetting the printing system.
    OS X Mavericks: Reset the printing system  also Yosemite
    Try setting it up as something other than AirPrint. I have seen several posts where that was the problem.

  • Airprint can not find my HP C4599 printer

    Unable to print document after downloading printer pro app from Apple store. Airprint can not find my HP C4955 printer!

    The sales message for Printer Pro says...  (Generally all sales are final in the app store)
    TRY BEFORE YOU BUY - just download free Printer Pro Lite to check how our application works with your printer.

Maybe you are looking for

  • Setting Office 2013 on Windows 8x in Pre-Production Mode

    Hello We are in the process of evaluating ADRMS for protecting documents. Currently, I have ADRMS running on a Windows Server 2012 x64. I have 2 other machines which talk to this - one with Office 2013 installed on a windows 8.1 set in production mod

  • Business Connector - JRE memory problem

    Hi, We have an Business Connector v4.0.1 under win2000 that uses IBM jvm 1.3.0 and due to the DST change we upgarde the JVM to SUN JRE 1.3.1_19, The problem that we have is that the Xmx limit for Sun JRE 1.3.1_19 is limited to arounf 1.7 M. However b

  • Renaming a Product in SLD

    Hi All, I have two products in the SLD, Product1 and Product2, Product1 has SW1 and SW2. All the development is done in the SoftwareComponents of Product1. I need to get the same with Product2, i.e something like assign SW1 and SW2 of Product1 to Pro

  • Lightroom 5 (5.3) not able to import about half of Nikon NEF files

    I have a Nikon d700 with SanDisk 32GB memory. Tried to import in lightroom 5.3 and got error message at the end saying many hundreds of files couldn't be imported. Ideas? Everything seemed to be working fine last week...no system changes or crashes .

  • Technical Help: Get linked Objects to CASE

    Hi forum, during runntime of CRM IC webclient I have the GUID of the Case. My requirement: Read all linked objects to this Case/Case GUID. If a linked object (e.g. internal task) is open, the agent should not be able to close the case -> Raise Error