License in lic.txt and ubb
lic.txt:
[BEA TUXEDO]
DEVELOPERS=5
LICENSEE=XXX
SERIAL=...
TYPE=SDK
USERS=5
VERSION=9.1
SIGNATURE=...
[BEA JOLT]
LICENSEE=Customer
SERIAL=...
TYPE=RTK
USERS=1000000
VERSION=9.1
SIGNATURE=...
ubb:
*MACHINES
MAXWSCLIENTS=200
My question:
1. Above, USERS=5 in [BEA TUXEDO] stands for the limit of WSL and JSL? or only for JSL? or only for WSL?
2. Does USERS=1000000 in [BEA JOLT] have some relation with USERS=5 in [BEA TUXEDO]?
3. Some doc said that "MAXWSCLIENTS <= Tuxedo license". "Tuxedo license" stands for USERS in [BEA TUXEDO] or [BEA JOLT]? Does MAXWSCLIENTS=200 have some errors with [BEA TUXEDO] or [BEA JOLT]?
Thanks a lot for your kindly reply.
Edited by: bill on 2013-3-25 下午12:12
Hi Bill,
That is the number of Jolt users you are licensed for. I don't believe that changes the number of Tuxedo users you are licensed for. So I think you could be licensed for unlimited Jolt users, but only be allowed 5 actual users if your Tuxedo license limits you to 5 clients. Have you taken this up with your Oracle Account Executive?
Regards,
Todd Little
Oracle Tuxedo Chief Architect
Similar Messages
-
Tuxedo client was in idle status and lic.txt question
I found that my tuxedo client code didn't work till yesterday and it looks like idle status. There is not any error info written to client application log or ULOG(except "INFO: License file d:\tuxedo9.1\udataojb\lic.txt not found"). I check another Tuxedo client environment and nothing wrong was found in client application log or ULOG. What's wrong with it? Thanks for your kindly reply.
Hi Bill,
I'm afraid I'm not following what's happening. Are you saying your client stopped working yesterday? Or are you saying it wasn't working until yesterday?
In any case, clients are for the most part completely under the control of your application code. So my guess is you'll need to attach a debugger to the client process and try and figure out what the client is doing. Alternatively you could add logging statements into your application code to try and figure out where in your application the client process is waiting.
Regards,
Todd Little
Oracle Tuxedo Chief Architect -
Renew License Problem - Option NSP and J2E (7.0) Windows Not Available
Hi all,
I Download and instaled the :
- SAP NetWeaver 7.0 Java Trial Version - SP14SR3
- SAP NetWeaver 7.0 ABAP Trial Version - SP12
for Windows almost 90 days ago.
To Renew the license I went to link "SAP Sneak Preview License Key Request"
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/minisap/minisap.htm]
But at "System Id *" combobox the correspondent options for Windows intalations above are not available (J2EE and NSP).
Pls, how to proceed ? I remember I did it with older versions (< SP14/SP12) with no problem.
Best Regards and thanks for your help.>
Klaus Keller wrote:
> see my posting at SAP NetWeaver Application Server
>
> Rgds,
> Klaus
Hi Mr. Klaus Keller, first at all, thanks a lot for your help,
After your msg I requested the license renew for NSP and J2EE with success, but when I tried to instal the new license file NSP.txt (User=SAP* / Transaction=SLICENSE) I received the error msg:
"Error when installing permanent license key - This system's system number is "000000000310714511", but there is a license key for system number "000000000310994500" in the license key file."
In fact the System Number on SLICENSE transaction and NSP.txt are diferents.
Looking at installation documentation (start.html / Getting Started) it shows the screen to request the renew license and it has the option below wich is not available at actual screen:
System number [ _________________ ] (For prologation only)
I tried to change the System Number manually at NSP.txt but the license becames invalid.
I did not try with J2E.txt license cause I notice that the System Number is different too.
Thanks for your attention,
Walmir Catunda.
PS. As the thread [No longer able to renew licenses for SAP Netweaver 2004 Linux Testdrive?|No longer able to renew licenses for SAP Netweaver 2004 Linux Testdrive?; is closed (answered) I will keep this and put a note to this one -
How can I read a column of numbers saved as .txt and display as a wave?
Hi Tiano
LabVIEW General
Ask:
Please enter a one-line summary of your question
Resources
• Technical Support
• Development Library
• Measurement Encyclopedia
"data/time reading into chart"
"In the attached file, I am trying to read the first column of data, and the next column is the value on the x-axis I want it plotted at. How do I read two columns of different data? I have looked in the books I have access to and the help within Labview but am still having trouble.
Thank you,
Ellie"
data_set (Plain Text, 3K)
-posted by Ellie on 9/11/2001
markwysong on 9/11/2001 answered:
"Ellie,
The first thing you need to do is to read your file in as a spreadsheet file. Then, you display it in a chart.
That sounds simple, but looking at your dataset, there's a few things you should know. First, the "read from spreadsheet VI" is looking for data in columns, like your data set, but columns separated by tabs. Therefore, your data must be saved that way; currently, it doesn't seem that it is. Another thing; you must skip the header portion (labels) of your file when reading.
Next, it would be easier if your time was first, and your data was second in your columns, but that can be overcome. In the VI I am including, I have copied your data set into a file called data.txt, and I've removed the header and separated the columns with a tab. Then, I read in the data, and I break out each column so I can put the time first, and then I combine them again into a cluster so it can be displayed on an XY chart.
Take a look!
Mark"
Graph data from file (Binary Executable, 20K)
data.txt (Plain Text, 3K)
This answer has not yet been rated.
Rate this answer:
Mikael Garcia on 9/11/2001 answered:
"Ellie,
Here is one way of doing it. Take a look at this example (compatible with LabVIEW 4.1 and up) and post comments if you need further help. Basically, I read your file as text; split it; and make use of the Spread sheet string to Array function before I plot your data. Hope this helps./ Mikael"
ExtractAndPlot.vi (Binary Executable, 36K)
This answer has not yet been rated.
Rate this answer:
Ellie on 9/12/2001 commented:
"Thank you. I am trying to get the data from the text file into a string and am having some trouble. I am reading the file from a spreadsheet, and sending the output array to "Array to Spreadsheet String", but I'm not sure this is what I want to do. Is there another way to make an array into a string? Do I need to reformat my data?
Can you offer me any advice?
Thank you."
data_1 (Plain Text, 3K)
Mikael Garcia on 9/12/2001 commented:
"I noticed that you changed your file format according to what was said here. Yes, this new file of yours is easier to use but your original file does not have to be changed. Take a look at this example. I now added the file-read part. It will give you a dialog to locate your data file (use this VI with your original file with the header since this VI includes a string split function). Hope this helps. /Mikael"
ReadExtractandPlot.vi (Binary Executable, 35K)
Niko on 9/12/2001 answered:
"If you read this file with the "read from spreadsheet file.vi" you get you
data in a 2-D-array. Now it is easy with array- and cluster-functions to
handle the data the way you want.
hope that helps, Niko"
This answer has not yet been rated.
Rate this answer:
I intend to read from a .txt file that contains a column of numbers. After reading I want to display it as a waveform. In fact the numbers represent points along a waveform/graph of Flow vs. time. Thus I want to have this info in the chart or graph with flow in the y0axis and time in the x-axis. Can someone give me some detailed help please? Thank you in advance.
Attachments:
The_file.txt 18 KBAll you have to do is use Read From Spreadsheet File.vi that's on the File I/O palette. For your example .txt, set the Transpose input to true and wire the First Row output to a waveform graph. The only problem I see is that since your file doesn't contain any sampling info, the time axis will be relative. If have that information elsewhere, then you can put a build waveform function between the read and the graph. Wire the First Row output to the Y input Build Waveform and add t0 and dt values. I've attached an example.
Attachments:
Graph_from_text.vi 29 KB -
I am getting this response when I am trying to open a file: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.” What do I do? I have opened this up in the past without a problem.
Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
Whenever I try to view a PDF file, I'm getting the error message "Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser." I have the new Adobe Reader but am still getting this message.
Even after launching Reader and accepting the EULA? Most strange.
-
Adobe Acrobat 9 complains that licensing no longer works and repair doesn't help? Ideas?
Adobe Acrobat 9 complains that licensing no longer works and repair doesn't help. Ideas?
Problem ocurred on Windows XP, Acrobat 9 Standard. Believe error was 138:4 - licensing error
Solution using Windows XP, Administrative tools under Control Panel
Control Panel – Select
Administrative Tools – Double Click
Services – Double Click
FLEXnet Licensing Service (Right click and select Properties)
General Tab: Startup Type – change “Disabled” -> “Automatic” Press Apply.
Recovery Tab: 1st, 2nd, and Subsequent Failures – change “Take No Action” -> “Restart the Service” Press Apply
General Tab: Service Status – press “Start Button” Press Apply
Services window – check FLEXnet Licensing status = “Started”
Verify fix by starting Adobe Acrobat 9 (rebooting not required). -
My Acrobat 9 pro crashed on my PC using XP. I deleted it and tried to reinstall. It asked for my license for 9, 7 and 6. I put in the 9 & 7 license which I have. How do I get the version 6 license. Is there a live person at Adobe & how do I reach them??
You have the upgrade serial number for Acrobat 9that is why it is asking the previous qualifying serial number, I am sending you the serial number of Acrobat 6 & 7 by private messaging, you can your self find them by using Find your serial number quickly
Regards
Rajshree -
I was ALWAYS able to open Adobe Reader items on my IMAC but just recently it is giving me a message stating "Before Viewing PDF documents in this browser you must launch Adobe Reader and Accept the End User License Agreement, then quit and relaunch the browser. When I download Adobe Reader for MAC it does not give me an option to except and Agreement I am using OS 10.9 HELP ASAP!!
lindsey k wrote:
Before Viewing PDF documents in this browser you must launch Adobe Reader and Accept the End User License Agreement, then quit and relaunch the browser.
And... did you do what the message tells you?
lindsey k wrote:
When I download Adobe Reader for MAC it does not give me an option to except and Agreement
Nothing to do with the download; you need to open Adobe Reader once after the install is complete, and accept the EULA. -
Using Google Chrome, when attempting to open a PDF document, the following message appears:
Before viewing PDF documents in this browser you must first launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.
On my Mac, there is no way to just open Adobe Reader and accept the ELUA.Hi Wade Perkins,
Please refer cant view pdf in browser.
Thanks. -
Getting error: Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser. I just purchased and installed Adobe acrobat pro for the Mac today.
Hi Tbeirne,
If you just want to save a pdf opened in Safari to your machine use the save as option from within the Reader plugin window. Just click on any of the buttons highlighted in below screenshots to Save a pdf at any location on your machine.
or
To summarize the issue, if you had opened an Internet PDF in a browser plug-in, you must use the save feature in the plug-in, not the Safari File > PDF Export, or File > Save As...
Please let us know if this solution works for you and you are able to save and view PDFs files locally.
Regards,
Shashi -
Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser.
I have tried to relaunch adobe but still keep getting same message. I can however download file and then open it with preview but would like to get this sorted!!Back up all data.
If Adobe Reader or Acrobat is installed, there should be a setting in its preferences such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected. Otherwise do as follows.
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present. The same goes for a plugin called "iGetter," and perhaps others.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
i did download the new version of adobe but a massage showed all the time (Before viewing PDF documents in this browser you must launch Adobe Reader and accept the End User License Agreement, then Quit and relaunch the browser)
You downloaded Adobe... what? Adobe has tons of applications.
Which Adobe product did you download?
Clinton -
Presently using iMac: OS X 10.9.4 (13E28)
1. Open website; click drop-down and this appears:
Before viewing PDF documents in this browser you must launch Adobe reader and accept the end-user license agreement, then quit and relaunch the browser.
2. Using an iMac, open founder and click downloads
3. Click AdbeRdr1013_en_US-1.dmg Apr. 4 2012, 7:11 AM 73 MB Disk Image Feb 27, 2013, 10:00 AM
4. Screen indicates it is opening Adobe reader X installer.package
5. Click this icon
6. Open Adobe installer; double-click install Adobe reader; putting password to access; click next; Note: Application is already installed; click finish.
Screen indicates: thank you and enjoy Adobe reader. Click Return to Prior Website. Click install now: total size 99.1 MB
Initializing arises with the following information: to proceed, open your download folder and locate the Adobe reader installer file, named Adobe reader installer [ XXX].dmg
It takes me back to steps that have already taken of locating down load file double-click to mount the disk image; double-click install Adobe reader; agreed by clicking open; entering name and password and clicking okay.
Did this several times with no success.
11. www.forums.adobe.comSorry if I failed to mention, I have done this as well.
-
When I send a group txt and one of the reciepients replies it creates a new message. How do I keep all the replies in the same message?
If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."
Maybe you are looking for
-
I downloaded an app off the store which said it was free and part of the 5 year promotion. I've been charged for the app by the store. I don't want the app and there's no one to speak to about it. Who can I call? How can I get the app off my phone? H
-
Cheque printing report in Oracle Apps Payables
Hi friends. I am working on reports development.Initially i worked on R6i,currently i am working on XML Publisher.I have a requirement for cheque printing.Our client deals with many banks and i have to make a separate report for each bank.How is cheq
-
Hi All, I wanted a horizontal slider with dates . Can anybody help please. Thanks
-
Question about setting the background from an image over the internet.
Hello , If I want the background of my panel to be set from an image over the internet directly do I just add that URL right away like this : protected final static String imagePath = "http://www.engr.wisc.edu/2010/background.jpg"; icon = new Imag
-
Print preview for dunning notice
How to see the pritnt preview for dunning notice ? any body tell me the procedure pls... Regards, pandu.