Lightroom 5. I've reinstalled it on a macbook pro but when I click "Develop" it states the module is disabled and I need to purchase a licence but I've got a full licence and it's running on another machine. How do I fix it?

Lightroom doesn't launch or returns "Develop module is disabled" error after 5.5 update

Similar Messages

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

I'm trying to reinstall Mavericks on used Macbook Pro. When I log in to my Apple ID, it says it was not the same ID used to purchase Mountain Lion. I need to change user/admin as a lot of the folders and apps are in Chinese!

The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model. Look it up on this page to see what version was originally installed.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
Once booted from the disc or in Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, buy it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able toauthorize it under your ID. In that case, contact iTunes Support.

HT1657 I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

See this previous discussion:
https://discussions.apple.com/message/16962474#16962474

I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album.

I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album as a proper image. Besides, I have also experiences the camera working a bit wiered (slow and often blanks out the moment I am ready to take a photo). Any help on this pls?

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

On my MacBook Pro, sometimes when I click to close tabs in Safari the button will not work. I have to click on some other part of the screen and then it will. This happens in other programs like Word/Excel for changing font, etc. Solution/Suggestions?

Start up in Safe Mode.
http://support.apple.com/kb/PH4373

I have added more songs to my library. Half of the library has selected ticks but when I click on any of the others to select them the whole song disappears from the list. Why and what can I do to fix?

I have added more songs to my library. Half of the library has selected ticks but when I click on any of the others to select them, the whole song disappears from the list. Why and what can I do to fix?

Hey Paul,
If I understand correctly, it sounds like iTunes is not grouping the songs from a particular CD together. The cause could be something as minor as a misspelling or slight variations. For more information, see the following resource:
Why aren't songs with the same album art grouped together?
http://support.apple.com/kb/TS1468
Thanks,
Matt M.

I used my adobe code, but when i try to install my programms it still says that i need to buy it. But i already did and i used my code.

i used my adobe code, but when i try to install my programms it still says that i need to buy it. But i already did and i used my code.

Are you getting " buy " on Creative Cloud App?
If yes then sign out from Creative Cloud App and sign back
Sign out, Sign in | Creative Cloud Desktop app
If you are getting the same status then check your hosts file entries once
Sign in, activation, or connection errors | CS5.5 and later

Sarari icon shows but when I click on it with the mouse a question mark appears and it won't open

The safari icon shows but when I click on it to open a questionmark appears and safari will not open?

I am guessing that the library may reference some content which was not on the same drive - maybe it references some picture or music pulled from an iphoto or itunes library on another mac?
It does load the library, right? Can you skim or play the clips in there? Do some fail to play or show a warning yellow sign?
And, by the way 'SAN' stands for "storage area network" - don't worry about it, it does not apply.

I have set up iCloud on my iPhone and Macbook Pro. When I go to the iCloud site, I sign in, but when I click on any of the apps (Contacts, Calendar, etc), I get a pop up message telling to enable said app by setting up iCloud. Help?

Hi,
I have set up iCloud on my iPhone and Mac. When I go to iCloud on the web, sign in, and click on one of the apps (Calendar, contacts, etc.), I get a message telling me to enable the app on my iOS device - which I've already done. Any idea why it's not working for me? Thanks!

This is presumably because you are running an earlier system than Lion. (Please always post your system when you have a question.)
The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
If you are running Leopard on an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further.

How do I log in to my macbook pro if when logging in, it stops at the apple logo and won't move?

I logged out of my mac book pro to transfer some files from my hard drive. When logging back in, the computer is not logging in at all... it just get stuck at the white screen at the log in apple, and keep twirling.... and just wont log in... what do I do?

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

My old laptop broke. Now I have a MacBook Pro. When I click on Purchases on the iTunes Store I can't see my Purchased music. Just Apps and Books. I have authorised my Mac but still can't download my music. How can I get my music back?

Help

Downloading past purchases from the App Store, iBookstore, and iTunes Store
(the music feature currently works in the US only)

My adobe premiere pro Cs4 was working since 2008 but now i can load one project but when i click to anyone menu the screen become white and cs4 not reply?why?

pourquoi lorsque je charge un projet sur cs4 il apparait,mais dés que je clique sur une fonction mon écran devient blanc et le logiciel ne répond plus?je travaille avec ce logiciel depuis 2008.Merci de bien vouloir m'éclairer.André

Nobody can tell you anything without proper system information and other details.
Mylenium

My itunes works, but when I click to go to the store, it says windows has stopped working and itunes closes out all together and i cant figure out why

please help

I'm expreriencing the same conditions with the same environment. Windows 8, iTunes-64 11.1.2.32, iTunes Store with a processing bar up to 80 +/- and the POPUP MESSAGE OF "iTunes stopped working. The error ...."
I UNINSTALLED, iTUNES WITH NO POSITIVE RESULT. I CHECKED THE FIREWALL AND IS THE SAME DEFINITION AS THE PREVIOUS ITUNES VERSION.
My iTunes StoreS from my iPhones ARE OK.
I'm spending a lot of time of research for WINDOW'S iTUNE with no solutions....

While using Google to find a website, the catagories appear, but when I click on one of the links, it takes me to a different website. Most of the time the sites seem to be like larger versions of pop-ups, and are all advertising or trying to sell somethi

When using Google to find a website, Google lists the various sites, but when I click on them, the take me to a larger version of a pop-up. Most are advertising sites that are trying to seel something
== This happened ==
Every time Firefox opened
== A few days ago

Maybe these will help:
https://discussions.apple.com/message/17677533#17677533
https://discussions.apple.com/message/18324129#18324129
https://discussions.apple.com/message/18203126#18203126

I've built a header/nav bar, for a website I'm designing, in Edge Animate but when I click on one of the links it opens the URL in the header/nav bar and not the whole web page? How do I fix this so the links open the URL when click on the whole page?

I'm designing the website in Adobe Muse, using the .OAM file from Edge Animate. Please help.

Sounds like you may need to set the target url to _parent
See reference: HTML a target Attribute
Darrell

Lightroom 5. I've reinstalled it on a macbook pro but when I click "Develop" it states the module is disabled and I need to purchase a licence but I've got a full licence and it's running on another machine. How do I fix it?

Similar Messages

Maybe you are looking for