Lightroom CC Smart-Sammlung: Selektion nach "noch nicht exportiert"

Hallo,
man kann bei der Erstellung von Smart-Sammlungen viele Parameter auswählen. Mir fehlt die Möglichkeit solche Bilder zu selektieren, die nach dem letzten Export wieder bearbeitet wurden.
Habe ich das nur übersehen, oder gibt es diese Auswahlmöglichkeit tatsächlich nicht?

So... das sind alle Infos die ich brauche; obwohl es nicht 100% die Antwort auf Ihre Frage ist 
Aus meiner Sicht ist die Lösung dieses Problems ein Veröffentlichungsdienst auf die gewünschte Festplatte (Mediencenter). In diesen Veröffentlichungsdienst können Sie dann Ihre Bilder direkt auf die Festplatte ausgeben lassen. Wenn Sie dann ein schon veröffentlichtes Bild wieder bzw. anders in Lightroom bearbeiten erkennt Lightroom, dass dieses Bild noch nicht in der aktuellen Einstellung auf Ihrer Festplatte liegt. Danach können Sie es einfach neu veröffentlichen. Somit ist die Version auf der Festplatte immer aktuell.

Similar Messages

  • Iphone 4 Tage nach Support-Anfrage immer noch nicht abgeholt? ist das normal bzw. wann wird denn das iphone abgeholt?

    Iphone 4 Tage nach Support-Anfrage immer noch nicht abgeholt? ist das normal bzw. wann wird denn das iphone abgeholt?
    nicht dass nur abgewartet wird, bis die Garantie ausläuft... wer hat Erfahrung damit?
    danke und lg

    Das mit dem Telefonsupport betrifft, glaube ich, nur den Fall mit technischen Problemen und der Beratung durch einen Techniker von Apple Support. Auf jeden Fall wird bei einer telefonischen Anfrage auf anfallende Kosten hingewiesen bevor sie entstehen.
    Generell könnte es je nach Anzahl der Anfragen für einen Austausch und Versandart schon mal länger gehen.
    Daher kostet "Express" ja auch extra, ich hoffe aber, dass die Mühlen für uns normale User nicht so langsam arbeiten

  • Illustrator startet nach Neuinstallation nicht

    Hallo zusammen.
    Ich habe ein Problem mit der Installation der Creative Suite CS6 nach Windows-Neuinstallation.
    Während des Setups kam die Meldung:
    "Der Installer hat festgestellt, dass möglicherweise ein Computerneustart erforderlich ist. Beenden Sie den Installer, starten Sie den Computer neu und versuchen Sie die Installation erneut."
    Daraufhin habe ich den PC zweimal neu gestartet, bis alle Windows-Updates erledigt waren, da ich dies für den Grund hielt.
    Die Meldung kam aber anschließend wieder und da habe ich durch "Ignorieren" die Software installiert.
    Photoshop funktioniert. Aber wenn ich Illustrator starten will kommt folgende für mich verwirrende Meldung:
    "Der Prozedureinsprungpunkt "?AcquireVarient@ImageInterface@drawbot@dvaui@@QEBA?BV?$intrusive_ptr@UImageInterface@dra wbot@dvaui@@@boost@@V?$rational@J@5@@Z" wurde in der DLL "dvaui.dll" nicht gefunden.
    Ich würde mich sehr freuen, wenn mir jemand bei diesem Problem helfen kann, damit ich Illustrator wieder nutzen kann.
    Danke

    Die DLL-Datei (dvaui.dll) ist vorhanden im Illustrator-Ordner unter support files\contents und im Ordner von InDesign sowie Media Encoder.
    Mein System ist Windows 7 Professional 64 Bit. Wie gesagt wurde das System erst kürzlich neu eingerichtet und es ist außer einigen Windows-Updates und Installation von ein paar Tools wie Firefox oder auch Steam noch nicht viel passiert.
    Welche Informationen würden denn helfen?

  • LR5 startet nach Erstinstallation nicht

    LR5 Vollversion startet nach Eingabe aller erforderlichen Daten zur Erstinstallation nicht. Es erscheint immer nur erneut das Fenster für die Eingabe der Daten für die Erstinstallation. Nach klicken auf "fertig stellen" passiert nichts mehr und das Fenster erscheint und fordert erneut die schon eingegebenen Daten. Die Trial Version war Installiert und lief ohne Probleme. System: Mac OS X 10.7.5  64bit, Intel Core i5, 8GB DDR3 RAM.

    Die DLL-Datei (dvaui.dll) ist vorhanden im Illustrator-Ordner unter support files\contents und im Ordner von InDesign sowie Media Encoder.
    Mein System ist Windows 7 Professional 64 Bit. Wie gesagt wurde das System erst kürzlich neu eingerichtet und es ist außer einigen Windows-Updates und Installation von ein paar Tools wie Firefox oder auch Steam noch nicht viel passiert.
    Welche Informationen würden denn helfen?

  • Die Funktion "PicExport​" ist z.Z. noch nicht aktiviert.

    Diadem 2012 meldet: Die Funktion "PicExport("\\Rechner\Freigabename\Unterordner\Unterordner\Unt​erordner\Unterordner\Unterordner\Unterordner\Unter​...\Kennwerte_tabelle.wmf","wmf",1,2000,2666)" ist z.Z. noch nicht aktiviert.
    Dieser Fehler scheint verstärkt auf Rechner aufzutreten auf denen man remote arbeitet. Der Zugang erfolgt über mstsc wobei die Zwischenablage und Drucker etc nicht verbunden sind.
    Ich kann den Fehler nicht eindeutig reproduzieren.
    Mal tritt er auf , mal nicht.
    Ich werte imme die selben Messungen aus.
    Parallel dazu taucht auch die Fehlermeldung
    Die Funktion "PicPrint("WinPrint")" ist z.Z. noch nicht aktiviert.
    Vermutlich ist der Fehlergrund für beide Befehle identisch.

    Hallo Lars
    Wir haben mehrere Scripte (ca.200 Dateien) die je nach Messaufgabe verschiedene Auswertung durchlaufen. In einem Batchbetrieb laufe ich durch viele Messaufgaben durch. Somit befinde ich mich natürlich in einer Schleife. Da es sehr wichtig ist dass die Auswertung nicht abbricht, werden mögliche Fehler abgefangen und später im Log dargestellt. Und die Fehlermeldung die von Diadem kommt ist "Die Funktion "PicPrint("WinPrint")" ist z.Z. noch nicht aktiviert." , allerdings dargestellt in einem eigenen Dialog.

  • Lightroom 6 zeigt RAW-Files von Sony nicht an

    Habe heute den Lightroom-Update auf Version 6 installiert. Seitdem werden mir im "Entwickeln"-Modul meine ARW-Dateien nicht mehr angezeigt. Kommt Lightroom 6 mit dem RAW-Format von Sony nicht zurecht? Mit dem letzten Release hatte es noch funktioniert. Hat jeman ähnliche ERfahrungen gemacht?

    Hallo Bernd,
    ich arbeite auch dienstlich mit CS2 und konnte dafür gerade noch das RAW-Plugin (3.7) bekommen, das die D80 unterstützt. Für die D3/D300 ist meines Wissens ein neueres Plugin nötig, das wohl mit PS CS3 und PSE 6 läuft, aber nicht mehr unter CS2 (so weit mein Kenntnisstand).
    Trostpflaster: Mit dem kostenlosen Adobe-DNG-Konverter können die neueren NEF´s auch für Photoshop CS2 zugänglich gemacht werden. Halt etwas umständlicher - und ich habs noch nicht getestet.
    Viel Erfolg beim Ausprobieren
    Bernhard

  • How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp

    How can I edit lightroom 5 smart previews on mac book pro (mbp) when the lightroom 5 master image files are on my external hard drive is disconnected from the mbp? So far when I try to disconnect the external HD from the mbp, I get the following pop up window: The disk "external hard drive A" couldn't be ejected because "Lightroom" is using it. Quit that application and try to eject this disk again. When I do that and restart Lightroom 5, the Adobe Photoshop Lightroom - Select Catalog screen pops up but doesn't list my external hard drive A as a choice.
    I've reviewed Adobe's Lightroom Help | Smart Previews Lightroom 5 web page and still haven't been able to figure what I'm doing wrong. Any help would be appreciated.

    Your internal HDD. by default, is named 'Macintosh HD'. From what information you supplied, it looks like there is already a Lightroom catalog installed on you local (internal) HDD using the standard naming convention Adobe uses as well as a Lightroom catalog on your external drive which you created. To be sure of which catalog Lightroom is loading when it starts up, To do this, start Lightroom as you normally would. After it starts, select the Lightroom menu item, then select the Catalog Preferences item and finally, navigate to the General tab. The Location information will tell you exactly what catalog Lightroom is opening by default. This will likely be the Photography Mac Book Pro Versions catalog on your external HDD. Once that is confirmed, you are ready to proceed. As an additional test/verification, you can shut down Lightroom and, this time, start Lightroom while holding down the ALT/OPTION key. This will cause Lightroom to pause and display a screen which will allow you to chose a different catalog to open. Navigate to the /Users/[user name]/Pictures/Lightroom folder and select the Lightroom 5 Catalog.lrcat file. When Lightroom comes up, there should be no previews or folders as this catalog should be empty. Now you can be certain which catalog is being used and which catalog has all your data and you are ready to migrate your current catalog. Shut down Lightroom.
    To migrate your current catalog, use Finder to locate your Photography Mac Book Pro Versions folder on your external drive. Select the folder and select COPY from the context menu. Next, use Finder to navigate to the /Users/[user name]/Pictures/Lightroom folder on you internal HDD. You can start at the Macintosh HD level and work your way down by opening each level (Macintosh HD/Users/[user name]/Pictures). Select the /Pictures folder and then select PASTE... from the context menu. When the COPY/PASTE is complete, you should see the following files on the Macintosh HD:
    Macintosh HD/Users/[user name]/Pictures/Lightroom/ and
    Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions
    The Macintosh HD/Users/[user name]/Pictures/Lightroom folder will contain the empty default catalog the Adobe created when Lightroom was installed and Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions will contain a copy of the catalog you created on your external HDD.
    You are almost done now. Make sure your external drive is still attached for this step. Restart Lightroom using the ALT/OPTION key again. When the Select Catalog screen appears, select the Choose a Different Catalog button (lower left side). When you do, a Finder window will open to allow you to navigate to a catalog of your choosing. Navigate to Macintosh HD/Users/[user name]/Pictures/Photography Mac Book Pro Versions and select the file Photography Mac Book Pro Version.lrcat. This is the copy you just created. Select the Open button and Lightroom should start. You should see all of your previews and settings just as before. Also, in the left hand panel, all of your folder should show up and none of them should be dimmed and none of your previews should display a small exclamation point badge. Either a dimmed folder name or an exclamation point badge indicates that Lightroom can't find the associated image file. If everything looks good, go to the Lightroom menu, select Preferences and then select the General tab. Under Default Catalog, select an option to either load the LAST catalog opened or select the Users/[user name]/Pictures/Photography Mac Book Pro Versions catalog from the drop down. Shut down Lightroom and then restart it normally. This time, when Lightroom starts, you should be viewing the new copy of your catalog. You can confirm this by looking at the General tab on the Catalog Preferences screen (Lightroom/Catalog Preferences menu items). Shut down Lightroom once again and this time, eject your external drive before restarting. This time, your folders in the left hand panel will be dimmed but you should be able to work with your smart previews. If Lightroom should display a Select Catalog screen with the external drive detached, double check your settings as it indicates Lightroom is still looking at the copy of the catalog on the external drive rather than the new copy you made.
    Finally, if you are seeing dimmed folders and/or exclamation point badges with the external drive attached, this indicates a problem. You can select any folder and select Update Folder Location from the context menu. This will allow you to navigate to the copy on the external drive and select it. Lightroom will then update the catalog (select to synchronize the content). This will not only clear the dimmed folder problem but also remove the exclamation point badges for all photos in that missing folder. However, it may indicate that not all went well with the copy of the catalog so make sure to verify all went well. You can use the Get Info option on the two folders. You should see the same number of files/folders for both the copy on the internal drive as well as on the external drive but you can't rely on the byte count because of the possibility of differences between the geometry of the two drives. Hope this all helps!

  • Adobe Premier Elements 12 lässt sich nach Installation nicht öffnen.

    Adobe Premier Elements 12 lässt sich nach Installation nicht öffnen. Der Startbildschirm erscheint zwar, aber beim Versuch ein neues Projekt zu öffnen erscheint kurz der Laufbalken, der dann kurz darauf wieder verschwindet ohne das ein Projekt geöffnet wird - der Startbildschirm bleibt. Auf einem anderen Rechner, auf dem ich die gleichen Windows Updates installiert habe funktioniert es ohne Probleme. Ein Deinstallation und Neuinstallation brachte keinen Erfolg - das Problem bleibt. Bitte dringend um Hilfe!!!

    Macht es Ihnen keine Fehlermeldung beim Öffnen PSE-Editor?
    Hat seine jemals gearbeitet?
    Sie erwähnten, dass Sie Nik haben, haben Sie überprüft Entfernen Nik und dann öffnet PSE-Editor?

  • IPod gestohlen. Gekaufte Ware noch nicht synchronisiert. Was tun?

    Mein IPod Touch wurde gestohlen und bereits gekaufte Ware wurde noch nicht in die Mediathek übertragen. Nun möchte ich ein Hörbuch wieder laden, geht aber nicht da das System sagt ich hätte das schon gekauft. Gibt es hierfür eine Lösung? Danke für Euere Hilfe.

    Goolge translate:
    My iPod Touch was stolen and already purchased goods has not been transferred into the library. Now I want to load an audiobook again, but will not because the system says that I have already bought. Is there a solution? Thanks for your help.
    Redownload the purchases by
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    However, free downloads are not allowed in all countries. If not allowed in your country yo will have to pay again.

  • 10.8 kann sich fensterposition nach neustart nicht merken

    10.8 kann sich fensterposition nach neustart nicht merken
    obwohl ich in den systemeinstellungen das häckshen gesetzt habe, sind nach dem neustart alle fenster geschlossen. zudem ist immer wieder der sortierte fensterinhalt (nach name) verschwunden und alle ordner liegen wild durcheinander im fenster.
    kann jemand helfen?

    Hallo Jacqueline,
    das war kein Update. 10.8.5 ist voller Fehler. Schlimmer geht's nimmer. Am besten über die amerikanische Seite unter Feedback das Problem schildern.

  • Wenn ich im apple store bin und mir ein app installieren will, kommt eine meldung: diese apple ID wurde noch nicht im iTunes store verwendet. tippen sie auf überprüfen um sich anzumelden, und überprüfen sie dann ihre account-daten. wieso?

    wenn ich im apple store bin und mir ein app installieren will, kommt eine meldung: diese apple ID wurde noch nicht im iTunes store verwendet. tippen sie auf überprüfen um sich anzumelden, und überprüfen sie dann ihre account-daten. wieso?

    Google translate:
    when I'm in the apple store and wants to install an app, comes a message: This Apple ID has not been used in the iTunes store. they type check to register, and then they check their account data. why?
    Apple is just verifying your iTunes account and payment method.

  • Hi weiss jemand wie ich mein Iphone 4 wieder aktivere denn hab denn code zu oft eingeben und kann deshalb nicht mehr rein ein Sim Karte ist noch nicht drinne und Icloud hab ich auch nicht weiss jemand was

    Hi weiss jemand wie ich mein Iphone 4 wieder aktivere denn hab denn code zu oft eingegeben und kann deshalb nicht mehr rein ein Sim Karte ist noch nicht drinne und Icloud hab ich auch nicht weiss jemand was??

    Hi weiss jemand wie ich mein Iphone 4 wieder aktivere denn hab denn code zu oft eingegeben und kann deshalb nicht mehr rein ein Sim Karte ist noch nicht drinne und Icloud hab ich auch nicht weiss jemand was??

  • Elements 10 Organizer funktioniert - auch nach Neuinstallation - nicht mehr.

    Elements 10 Organizer funktioniert - auch nach Neuinstallation - nicht mehr. Was kann man tun?

    Hallo..
    Vielen Dank für Ihre Tipps.
    Nachdem mir auch die Vorschläge vom  Adobe Support nicht helfen konnten, dass mein Elements 10 Organizer funktioniert, wurde
    mir vom Adobe Support geraten Elements 10 neu zu installieren. Bei dem Installationsversuch wurde das bisher verwendete fehlerhafte Elements 10 Programm gelöscht.
    Die Neuinstallation des Programms funktionierte auch nicht.
    Die Installation des Editors und Organizers funktionierte, dann erschien folgender Hinweis: " Die Installation wurde abgebrochen bevor Elements10 vollständig installiert werden konnte. Die folgende Anwendung konnte nicht installiert werden. "Gemeinsame Technologien.”
    Ich habe dann Photoshop Elements 10 auf meinem Netbook erfolgreich installiert. Das Programm scheint in Ordnung zu sein. Der Fehler muss deshalb bei meinem PC liegen
    Wo ist der Fehler auf meinem PC?
    Kann mir jemand einen Tipp geben?
    MfG.  J. Marx

  • Ich habe eine Apple ID, kann mich jedoch nicht damit anmelden! Ich bekomme immer die Meldung: Die Apple ID wurde noch nicht im iTunes Store verwendet. Was kann ich da machen???

    Ich habe eine Apple ID, kann mich jedoch nicht damit anmelden! Ich bekomme immer die Meldung: Die Apple ID wurde noch nicht im iTunes Store verwendet. Was kann ich da machen???

    Ich habe mich an den Support gewendet, weiß nicht, welche technischen Informationen weitergeholfen hätten: keine Proxies und keine Firewall, Internetverbindung funktioniert, Abo ist ein Jahresabo der Creatice Suite for Teams, ich nutze bei der Arbeit einen Windows-Rechner und zu Haus beim zweiten Platz einen Mac.
    Gelöst hat sich das Problem mit dem Löschen aller "Adobe-Einträge" in der Host-Datei, danach war endlich eine Aktivierung der Programme im Abo nur mit der Adobe-ID ohne Seriennummer möglich.
    Gruß Gesine

  • Anmeldung und Nutung nach Neuinstallation nicht möglich

    CS6 musste komplett vom PC entfernt und neu installiert werden. Nun geht nichts mehr. Die Registrierung schlägt ständig fehl. Und wenn der Anmeldevorgang übersprungen wird passiert gar nichts.

    Sorry, blutiger Adobe -Anfänger …
    Hier die Systeminformationen:
    Lenovo-ThinkPad E520
    Windows 7 Professional 64 Bit
    Adobe Design Std CS6 6.0 MLP AOO License D (65163298)
    Das Programm wurde nicht deaktiviert und über die Systemsteuerung deinstalliert.
    Nach der Neuinstallation lässt sich das Programm nicht anmelden. Wenn der Anmeldevorgang übersprungen wird, bricht der Programmstart ab.
    Beschreibung: Beschreibung: JuBi_Logo-Klein  Dirk Schoppmeier
    Ev. Jugendbildungsstätte & Erwachsenenbildung
    im Evangelischen Kirchenkreis Tecklenburg
    Sonnenwinkel 1, 49545 Tecklenburg
    Tel.: 0 54 82 - 68 135
    Email:  <mailto:[email protected]> [email protected]
    Von: Mylenium [email protected]
    Gesendet: Freitag, 21. Juni 2013 18:24
    An: JuBiDSchTe
    Betreff: Anmeldung und Nutung nach Neuinstallation nicht möglich [92.5%]
    Re: Anmeldung und Nutung nach Neuinstallation nicht möglich
    created by Mylenium <http://forums.adobe.com/people/Mylenium>  in Creative Suites - View the full discussion <http://forums.adobe.com/message/5435940#5435940

Maybe you are looking for