Lightroom trial installs then fails to run
Downloaded and installed Lightroom 4.2 on Mac 10.7.5. Already successfully running Adobe CS5.5 suite but Adobe Lightroom fails.
LR opens but then it immediately displays this error message: "Error occurred when attempting to change modules." It isn't possible to get past the message because it won't close. I am able to ignore it and select options from the menu bar but none of the choices on the drop-down menus are selectable. LR simply doesn't respond.
I have uninstalled LR (and all of its associated files) and reinstalled it without success. Any advice would be greatly appreciated.
Try this technote: http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom.html
Similar Messages
-
Lightroom 5 installation keeps failing
Lightroom 5 installation keeps failing.
Solution mentioned here doesn't work, because my default installation language is English. The installation process stops and shows there's an error but doesn't actually show the error message. The system language on my laptop is Russian.
I had a trial installed previously and now need to activate it with my Creative Cloud membership but it's been about two weeks since I purchased it and it still doesn't work!Hi,
I’m sorry to hear that! Not sure why it worked for me but not for you. I’d like to check the steps you made just to make sure…
What OS or you using?
I removed Lightroom from Creative Cloud. – So there is no error showing.
I downloaded the: Lightroom_5_LS11_win_5_2 from the link.
Unpacked it to the desktop (any folder will do).
Then I navigated to the folder and installed Lightroom_5_LS11_win_5_2.
Re opened CC and clicked install. It then install the 5.3 update.
If you followed all these steps and still have no luck then A, let me know. And B, you may have to wait for Adobe to fix the issue.
I’ll troll the internet for you too.
There are still more things we can try, so don't give up!
I love Lightroom and feel your pain!
Thanks,
Mike -
Application express installation is failed while running apxdevrm.sql scrip
Hello Experts,
i am new to Oracle Application express. My installation is failed while running the script (apxdevrm.sql).
here is the command i ran as sysdba
@apexins xxxxx apex apex temp /i/
installation is exited with the following error :
REPORT:SYS> prompt Set Application ID...
Set Application ID...
REPORT:SYS>
REPORT:SYS> begin
2
3 -- SET APPLICATION ID
4 wwv_flow.g_flow_id := nvl(wwv_flow_application_install.get_application_id,4411);
5 wwv_flow_api.g_id_offset := nvl(wwv_flow_application_install.get_offset,0);
6 null;
7
8 end;
9 /
REPORT:SYS>
REPORT:SYS> --application/delete_application
REPORT:SYS>
REPORT:SYS> begin
2
3 -- Remove Application
4 wwv_flow_api.remove_flow(nvl(wwv_flow_application_install.get_application_id,4411));
5
6 end;
7 /
begin
ERROR at line 1:
ORA-20001: API operation includes calls that are incompatible with the current runtime.
ORA-06512: at "APEX_030200.WWV_FLOW_API", line 32
ORA-06512: at "APEX_030200.WWV_FLOW_API", line 247
ORA-06512: at line 4
here is my database version :
REPORT:SYS> select * from v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
OS version :
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.6 (Tikanga)
any one had this issue in the past?
your help is greatly appreciated.
Edited by: 892564 on Oct 20, 2011 4:15 PMHello experts,
is there any best way to trouble shoot the error which i got?
Thanks
!# Pavan -
WSUS reinstall on 2012 SCCM server post-installation task fails to run/finish
I had to re-install WSUS on a 2012 R2 SCCM server (Windows 2012), and am running into several issues re-installing. It may help to point out that the SCCM SQL server is remote, so this isn't a WSUS / SQL 2012 issue.
The sticky post at the top of the WSUS forum has helpful troubleshooting information, and I have tried going through this as well as many other threads on this very topic of re-installing WSUS.
1. Roles for WSUS and WID were removed successfully. The WSUS Website was manually deleted from IIS. As this is a SCCM server, removing the IIS role is not an option.
2. I removed the existing WID database files for SUSDB
3. After rebooting, I verified registry keys were gone, system files were cleaned up, and deleted the program files\update services directory
4. This isn't a permission issue, as I have clearly installed this before on this server.
5. Registry keys, system files, and susdb files no longer exist, and the server has rebooted cleanly.
6. I am able to add the WSUS role selecting WID, and this installs WID without any errors. At this point, simply clicking the post installation task fails, generates an empty .tmp file in my %appdata%\temp folder, and exits the MMC.
7. This file is blank. Absolutely empty, so I couldn't really troubleshoot any post installation tasks.
8. Further investigation shows that the 'C:\Program Files\Update Services\Tools\' directory is gone, and isn't being
generated.
9. Ok... DISM /online /Cleanup-Image /Scanhealth didn't return any issues, so I copied the wsusutil out of the windows\WinSxS directory.
10. Yey! wsusutil postinstall runs, but bombs out on the IIS portion. It generated the DB without an issue, but results
in an IIS generation error. So, I installed WSUS on a clean 2012 install, then copied over the program files\updateServices directory to reclaim the missing files.
The log files show --
2013-12-06 10:30:34 Configuring IIS...
2013-12-06 10:30:35 Start: ConfigureWebsite
2013-12-06 10:30:36 Configuring website on port 8530
2013-12-06 10:30:39 System.ComponentModel.Win32Exception (0x80004005): The system cannot find the file specified
at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.ExecuteIisCustomAction(String arguments)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.Install(Int32 portNumber)
at Microsoft.UpdateServices.Administration.UseCustomWebSite.InstallAndConfigure(IisConfiguration& iisConfiguration, Int32 newPortNumber)
at Microsoft.UpdateServices.Administration.PostInstall.ConfigureWebsite(Int32 portNumber)
at Microsoft.UpdateServices.Administration.PostInstall.Run()
at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
... ok - tripple checked that network service has permissions to .net and windows\temp folders.
netstat -a doesn't show anything running on port 8530 ( in case this was some weird port check in use)
Which goes back to the missing directory problem -- further net searches show that this is a reoccurring issue for some OOBE... sfc /verifyonly shows ... nothing.
What is left to be done at this point? The missing folders from the program directory seems to be a problem for some with some users right out of the box. I have read many other threads where users just formatted and started over. Not exactly a solution
- any help out there on this issue? Any suggestions to determine what file is missing, or generating the IIS issues?Part of the post install tasks wanted to download some items including the tools folder.
Can you expand on this please. The WSUS post-install tasks do not download anything, except what is acquired during the initial synchronization with Microsoft.
Because of my group policy the WSUS server was trying to download the updates from itself even though it was not setup yet.
What update(s) was the WSUS server trying to "download"?
In fact, if the WSUS Server was not setup yet (but you already had a GPO in place), then the first issue here was performing deployment steps out of order.
But still.... except for the actual installation binaries for the WSUS Server Role on a WS2008SP2/WS2008R2 system, there's nothing the WSUS server needs to get from either Windows Update or a WSUS server. This scenario is actually discussed hundreds of times
in this forum, but complicating matters, this thread isn't about installing WSUS V3.2 on a WS2008SP2/WS2008R2 system, it's about installing WSUS v65 on a WS2012 system, so I'm a bit confused as to what the actual installation environment is that we're discussing.
I changed the WSUS server to get it's windows updates from Microsoft and then the post install task succeeded.
I'd really like to get some more details about what exactly in the "post-install task" was dependent upon content from WU/WSUS.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
I am trying to install DPM 2012 R2 and one of the pre-reqs is to run 'DPM Remote SQL Prep' before kicking off the DPM installation. My SQL server is 2012 SP1 and when I select this option, I get an error straight away telling me 'System Center 2012
R2 DPM Support Files installation has failed'.
Not sure how to troubleshoot this as doing a search did not bring up anything.I am trying to install DPM 2012 R2 and one of the pre-reqs is to run 'DPM Remote SQL Prep' before kicking off the DPM installation. My SQL server is 2012 SP1 and when I select this option, I get an error straight away telling me 'System Center 2012
R2 DPM Support Files installation has failed'.
Not sure how to troubleshoot this as doing a search did not bring up anything.
Ignore this.
I launched the setup as Administrator and it worked! -
Photoshop Cs6 (TRIAL) - Installation failed - Encountered Errors.
Hi, Sorry I don't know if this question has been asked yet, so I'll have to ask.
Everytime I have tried to install the Photoshop CS6 trial, it says that my installation has failed and that it has encountered errors. Below is what my error report says.
Exit Code: 15 -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 1 error(s), 0 warning(s) ERROR: Media DB Error : 12
So, I'm not understanding what the error is.
I know I meet the system requirements because I'm running:
Microsoft Windows 7 (Home Premium)
4 GB RAM
585 GBs of Hard Drive.
It says 86x bit? I think?
I'm pretty sure that I have those met.
Other than that, I'm just not understanding why this isn't working.
Adobe Download Assist is installed just fine.
Hope someone can help!Did you have the Photoshop Beta installed? If yes, then you need to uninstall that one before you can install the trial.
Does your account have sufficient privileges? If not, you might need to log in as Admin.
Run the install again.
If the error recurs, then run CS Cleaner Tool and remove all products.
Reinstalling after that, should resolve the problem. Get the Cleaner tool here: http://www.adobe.com/support/contact/cscleanertool.html
Let us know how it goes. -
When Creative Cloud updated a few days ago (Win7) it reported I had no installed apps.
In Lightroom I keep getting messages that a new version is available. Installed it from CC and it installed without error, CC shows I installed it, but it simply fails to run.
How do I get CC to find apps installed under the previous version?
And how do I get Lightroom CC to run?
PeterI still don't know how to get CC to find that I have Photoshop CC installed, but running Creative Cloud, going to Preferences and signing out, then signing in again got Lightroom CC to work.
Since Photoshop CC is still working despite apparently not being installed things are now OK, at least for the moment. But I'm not feeling at all happy with Adobe. -
Trying to install photoshop CS6 trial, installer initializes then dissapears
I'm trying to install the photoshop CS6 extended version trial, and when I start the installer, it opens the initializer, the bar fills, then it dissapears and nothing happens. I'm recently upgraded to windows 8.1, the trial used to work fine on windows 7.
CaseyF are you attempting to use the same trial which was installed prior to upgrading to Windows 8.1? If so, and assuming the trial is not expired, then I would recommend reviewing your PDApp.log for the specific error causing the installer to fail to initialize. Please see Troubleshoot with install logs | CS5, CS5.5, CS6, CC - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to locate and interpret the PDApp.log. You are welcome to post any specific errors you discover in the log to this discussion.
-
Downloading flash installer hangs at 30% then fails every time
Hello, I am running a 2012 MBP retina. I download the latest version but the installer pauses for a minute while downloading (at the 30% mark), then fails. "Connection Failed. Unable to complete installation".
I have tried following the solution in this thread:
Flash Player Installer hangs at 95%
But I don't see the .pkg file inside the downloaded .app file. I am not running antivirus and I have rebooted. I have used the uninstaller as well. I am using Safari for this.
Any suggestions?
Thanks,
ChrisManaged to resolve this myself (see this thread: How to perform a "clean install" of Flash Player in Mac OS X)
Thanks for all the replies though -
11gR2 RAC installation in AIX fails while running root.sh on node2
Hi
We are in the process on installing 11gR2 RAC on AIX 6.1
But the installation is failing on node 2while running root.sh with the following error.
DiskGroup DATA creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-15017: diskgroup "DATA" cannot be mounted
ORA-15003: diskgroup "DATA" already mounted in another lock name space
Configuration of ASM failed, see logs for details
Did not succssfully configure and start ASM
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: XXXXX/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
Please help
RegardsHI,
the second node (second root.sh) should not want to "create" the diskgroup data, since it is already there.
This pretty much sounds like you tried to start both root.sh (on the first node and on the second node) at the same time, not waiting for it to finish on the first node.
It is important, that before you start the root.sh on the second node, it has to be finished successfully on the first node for the cluster to update the information.
Sebastian -
BlackBerry Desktop Software installs but then fails to open
Purchased BlackBerry today.
BlackBerry Desktop Software installs from distribution disc but then fails to open. Can see it in Windows Task Manager>Processes, as follows:
Windows Task Manager>Processes
Image Name: DesktopMge.exe CPU: 00 Mem Usage: 7,764 K
Windows Task Manager>Applications
Not listed!
I UNISTALLED previous installation of BlackBerry Desktop Software, including user settings.
Downloaded and installed the installation file for BlackBerry Desktop Software version 4.7, “470_b050_english.exe”, but with same result. Uninstalled it, too.
As suggest elsewhere in this forum, I made directory as follows: C:\INSTALL\Blackberry
Then extracted the downloaded installation file for BlackBerry Desktop Software version 4.7, “470_b050_english.exe”, into it.
Then started installation by clicking on “BlackBerrySetup.exe”.
However, the result is the same, as described above. BlackBerry Desktop Software installs but then fails to open.
Any help would be appreciated. I would like to make this software work.
Is there alternative software available?
Solved!
Go to Solution.http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
HOWTO : use your blackberry as a USB device
and then install the Desktop Manager as administrator.
and use it as administrator too.
The search box on top-right of this page is your true friend, and the public Knowledge Base too: -
Hi
DAG Failed then how to run e-mails in my organisation from another DAG.
means the another DAG work automatically or i will do something for outside the DAG.
Regards
Anil kumar GangwarHi,
In order to resolve the problem more efficiently, I need to clarify some information.
1. Do you have two AD sites in your environment?
2. If you have two AD site, do you have active users in these two AD sites?
3. Does each AD site have a DAG which is cross-site?
Best regards,
Belinda
Belinda Ma
TechNet Community Support -
Anyone out there that knows how to get past this? I´m using Adobe Application Manager and nothing else.
Installed Photoshop and Illustrator without problem, but as I try to install Lightroom 5 it is aborted.I am having the same problem, I am using win vista 64, and everything but LR 5 works,
{{ Third party payload installer Install Lightroom 5 CCM.exe failed with exit code: 1603 }}
any solutions out there?? -
When I double click run installation, then proceed to restart, I restart the computer, but when it loads back up, I get an error message, saying I need to restart, whats wrong?
I get an error message, saying I need to restart, whats wrong?
That is a "kernel panic".
Try here. Resolving Kernel Panics -
I downloaded a trial of photoshop. It runs for a minute or so, then a message displays saying that photoshop has stopped. No error codes, just the message. I have exhausted the "try this" stuff that I can find. Any other ideas would be appreciated. I would also like to know what some alternative applications might be. This trial does not give me confidence in Adobe's product.
I saw a similar question deeper into the forum right after I posted. I followed the fix steps and it took care of the problem.
Thanks for getting back to me. I am good to go.
Maybe you are looking for
-
Problem in Activation of the SFC after SFC serialization
Hi Experts, I am trying to do SFC serialization. I am able to do it.However after serialization , the old SFC became INVALID but new SFC is not becoming active at next operation. I am trying as follows in Activity Hook at PRE_START hook point. Split
-
Availability of material based on the shipping conditions
Dear Friends, Please mail to me how to configure the availability of material based on the shipping conditions? That is when we give the shipping condition in the sales order (va01) for example by air 1 day, by road 5 days and by water 6 days. The sy
-
Trouble send a message to XI via Proxy
Hi, I'm trying to send a message from R/3 System to XI via Proxy, but I just can see the message in the R/3 side (SXMB_MONI), the message has a Green Flag Status. When I activated a queue that the message belongs to it goes to Red Flag Status and I g
-
Hi, I am using BAPI 'BAPI_GOODSMVT_CREATE' to create goods receipt. I want to make goods movement for IS OIL materials - meaning those materials that carry a UoM group in the oil-specific view in the material master data, MARA-CMETH = 1 or 2. I have
-
Problem in displaying images...urgent
Hi, i have a table create table image_table ( filename varchar2(255) primary key, image blob); now from forms 6i using the code read_image_file( :image_table.filename, 'JPG', 'image_table.image' ); i insert an image into the database and now i try to