Limit to recards through sql loder

Hi to all,
I am loading records through sql loader which have more then 10000 records but i want to lode only 500 records how can i please help.....

Hi
You can frame a Control File in this way
<filename>.ctl
options load=500
load data
infile *
insert into table <table_name>
col1,
col2,
coln...
begindata
<your_data>
Regards
Nakul Venkataraman

Similar Messages

Error While executing a SSIS package which contains a script task through SQL Server Agent job

Hi,
I have a SQL Server 2012 SSIS package with a script task along with other tasks [data flow, execute sql tasks ]. When I manually executed the job through BIDS, its completed successfully.
Then I have automated the execution of the package through SQL Server Agent Job. But when I executed the package through SQL Agent job, it runs successfully for all the tasks except script task. When it comes to execute the Script Task, it is getting failed
with the below error message.
"Error: 2012-08-29 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
I have installed the SSIS on the 64-bit environment and SSIS service is running. Also I tried to run the job through 32 bit [job option] but I am getting the above error in all cases.
Any help will be greatly appreaciated !
Thanks,
Navin
- naveen.reddy

Hi Arthur,
My script task access the excel files in a network share, refresh them all and save them. When I execute the ETL manually or thru DTEXEC, it is executing successfully. I am facing the issue when I am executing thru SQL Agent Job only. Logging also showing
the same error.
"Error: 2012-08-23 12:45:14.67
Code: 0x00000001
Source: Script Task
Description: Exception has been thrown by the target of an invocation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:45:10 PM
Finished: 12:45:14 PM
Elapsed: 4.353 seconds
- naveen.reddy

Issue in creation of group in oim database through sql query.

hi guys,
i am trying to create a group in oim database through sql query:
insert into ugp(ugp_key,ugp_name,ugp_create,ugp_update,ugp_createby,ugp_updateby,)values(786,'dbrole','09-jul-12','09-jul-12',1,1);
it is inserting the group in ugp table but it is not showing in admin console.
After that i also tried with this query:
insert into gpp(ugp_key,gpp_ugp_key,gpp_write,gpp_delete,gpp_create,gpp_createby,gpp_update,gpp_updateby)values(786,1,1,1,'09-jul-12',1,'09-jul-12',1);
After that i tried with this query.but still no use.
and i also tried to assign a user to the group through query:
insert into usg(ugp_key,usr_key,usg_priority,usg_create,usg_update,usg_createby,usg_updateby)values(4,81,1,'09-jul-12','09-jul-12',1,1);
But still the same problem.it is inserting in db.but not listing in admin console.
thanks,
hanuman.

Hanuman Thota wrote:
hi vladimir,
i didn't find this 'ugp_seq'.is this a table or column?where is it?
It is a sequence.
See here for details on oracle sequences:
http://www.techonthenet.com/oracle/sequences.php
Most of the OIM database schema is created with the following script, located in the RCU distribution:
$RCU_HOME/rcu/integration/oim/sql/xell.sql
there you'll find plenty of sequence creation directives like:
create sequence UGP_SEQ
increment by 1
start with 1
cache 20
to create a sequence, and
INSERT INTO UGP (UGP_KEY, UGP_NAME, UGP_UPDATEBY, UGP_UPDATE, UGP_CREATEBY, UGP_CREATE,UGP_ROWVER, UGP_DATA_LEVEL, UGP_ROLE_CATEGORY_KEY, UGP_ROLE_OWNER_KEY, UGP_DISPLAY_NAME, UGP_ROLENAME, UGP_DESCRIPTION, UGP_NAMESPACE)
VALUES (ugp_seq.nextval,'SYSTEM ADMINISTRATORS', sysadmUsrKey , SYSDATE,sysadmUsrKey , SYSDATE, hextoraw('0000000000000000'), 1, roleCategoryKey, sysadmUsrKey, 'SYSTEM ADMINISTRATORS', 'SYSTEM ADMINISTRATORS', 'System Administrator role for OIM', 'Default');
as a sequence usage example.
Regards,
Vladimir

Getting error while trying to upload the data in excel from SSIS package through sql agent job

We are getting below errors.
Error:
The Microsoft Jet database engine cannot open the file '\\serversdev\Documents\QC Files\Prod.xls'. It is already opened exclusively by another
user, or you need permission to view its data.
Please suggest ASAP
Regards,
Ramu
Ramu Gade

Hi Dikshan Gade,
According to your description, you want to upload data from excel to database, when you call ssis package through SQL Server Agent job, you got the error message.
To troubleshoot the problem, please refer to the following steps:
Validate that the account has permissions on the file and the folder.
Verify that the file and the data source name (DSN) are not marked as Exclusive.
Make sure SQL Server Agent Services service account has the permission to access the database.
We can check SQL Server Agent’s activity logs, Windows Event logs and SSIS logs to get more clues. Also the tool Process Monitor is helpful to track the cause of registry or file access related issues. For more information about the issue, please refer to
the following KB article:
http://support.microsoft.com/kb/306269
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Error: Failed to acquire connection while exporting a file using SSIS package through SQl Server Agent job.

Hi Team,
I am running a sql server job which is loading data to a sharepoint document library.File is an excel format and is getting loaded
when executed through SSDT solution .But when i am using an SQL Agent job to pick up the file it doesnt get the path and agent job fails with the error "Failed to acquire connection".I have deployed the SSIS Package through SQL Server 2012 deployment
methodologies.
I am not able to trace the error of loading data from a sharepoint library.library. Sql agent jobs works fine when i give local path.The
account which is running the sql agent job is the same who has access to document library.I also tried to run the job through proxy account. I am using a xml configuraion to store my credentials.I am able to palce the same file to a network drive in the same
server through sql server agent job. The only problem is when I am trying to load the file to a sharepoint folder.
Thanks,
Arsa..

Is that the WebDAV method that you are suggesting here to map the n/w drive?
Its kind of webdav but you will be using windows nw drive to store data
yes, I am able to create the file to D: , but didn't check with the C:.
Try with c:, as c: require special permisssions
If this helped you resolve your issue, please mark it Answered

SSIS package give an error if execute through SQL server agent

I have created a SSIS package in BIDS 2012. If i execute this package through sql server agent it gives the below error:
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 11:19:47 AM Error: 2015-01-20
11:19:47.83 Code: 0xC0016016 Source: Sub_Hadoop_aggregation Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.".
You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2015-01-20 11:19:47.94 Code: 0xC0016016 Source:
Sub_Hadoop_aggregation Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error
occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2015-01-20 11:19:48.04 Code: 0xC0016016 Source: Sub_Hadoop_aggregation Description: Failed to
decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct
key is available. End Error Error: 2015-01-20 11:19:48.92 Code: 0xC00291EC Source: alter_keys Execute SQL Task Description: Failed to acquire connection "mstr_warehouse". Connection may not be
configured correctly or you may not have the right permissions on this connection. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:19:47 AM Finished: 11:19:48 AM Elapsed: 1.42 seconds.
The package execution failed. The step failed.
so i have change some properties in our package like protectionlevel change from encrypted to dontsavesensitive. After that i have created configuration file for the package and use that configuration file. It executes the package through sql server agent
smoothly.
Thanks
Azhar Khan

Hi selfdestruct80,
According to your description, you created SSIS package and it works fine. But you got the error message when the SSIS package was called from a SQL Server Agent job.
According to my knowledge, the package may not run in the following scenarios:
The current user cannot decrypt secrets from the package.
A SQL Server connection that uses integrated security fails because the current user does not have the required permissions.
File access fails because the current user does not have the required permissions to write to the file share that the connection manager accesses.
A registry-based SSIS package configuration uses the HKEY_CURRENT_USER registry keys. The HKEY_CURRENT_USER registry keys are user-specific.
A task or a connection manager requires that the current user account has correct permissions.
According to the error message, the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword as ArthurZ mentioned. To solve the problem, you need to go to Command Line tab, manually specify the paassword in SQL Agent Job with the command like below:
/FILE "\"C:\Users\xxxx\Documents\SQL Server Management Studio\SSIS\Package.dtsx\"" /DECRYPT somepassword /CHECKPOINTING OFF /REPORTING E
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

Fetch SSIS error through SQL Server Agent JOB

Hi,
I am trying to fetch eventmessages from catalog.eventmessages view in SSISDB inside a sql job which executes a package. This utility is supposed to send an email with the description of failure reason and step whenever the JOB fails. But I could not find
a way to reference a package in SSISDB with the corresponding JOB through SQL query.
sysjobsteps stores the step info, but how can I refer to the SSIS package using the info from this table or any other table. Please provide an expert view for this problem.
Regards
Mohit

sysjobsteps stores the step info, but how can I refer to the SSIS package using the info from this
table or any other table
Can you try like this?
SELECT e.package_name,e.message
FROM msdb.dbo.sysjobsteps js
inner join SSISDB.catalog.event_messages e
On js.command collate database_default like'%\' + e.package_name collate database_default + '%'
--WHERE e.event_name ='OnError'
Uncomment the WHERE clause if you want to specifically look for errors
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Error while executing Multiple Stored Procedure through .sql file

Hi Guru's.
I am new to ORACLE. I am facing problem while creating Stored Procedure through .sql file.
I have one test.sql file with Stored Procedure is like,
CREATE OR REPLACE PROCEDURE skeleton1
AS
BEGIN
DBMS_Output.Put_Line('skeleton1');
END skeleton1;
CREATE OR REPLACE PROCEDURE skeleton2
AS
BEGIN
DBMS_Output.Put_Line('skeleton2');
END skeleton2;
Now when i try to execute this test.sql file through SQL PLUS it gives me Error like this
I am opening test.sql file from SQL PLUS,
SQL>
1 CREATE OR REPLACE PROCEDURE skeleton1
2 AS
3 BEGIN
4 DBMS_Output.Put_Line('skeleton1');
5 END skeleton1;
6 /
7 CREATE OR REPLACE PROCEDURE skeleton2
8 AS
9 BEGIN
10 DBMS_Output.Put_Line('skeleton2');
11* END skeleton2;
SQL> /
Warning: Procedure created with compilation errors.
SQL> show errors;
Errors for PROCEDURE SKELETON1:
LINE/COL ERROR
6/1 PLS-00103: Encountered the symbol "/"
SQL>
Please suggest how to create multiple CREATE PROCEDURE using single .sql script file....
Regards,
Shatrughan

Hi,
Try this
CREATE OR REPLACE PROCEDURE skeleton1
AS
BEGIN
DBMS_Output.Put_Line('skeleton1');
END ;
CREATE OR REPLACE PROCEDURE skeleton2
AS
BEGIN
DBMS_Output.Put_Line('skeleton2');
END;
/Save the file and call it.
Regards,
Bhushan

WARNING:Could not lower the asynch I/O limit to 224 for SQL direct I/O. It is set to -1

Hi,
We have recently upgraded single instance database to 10.2.0.5 patch set 4 on windows server 2003 64 bit
After upgrading we are facing issue of number of warnings in trace files (bdump)
WARNING:Could not lower the asynch I/O limit to 224 for SQL direct I/O. It is set to -1
I know this is bug 9772888 and oracle suggest to upgrade to 11.2.x but we can't upgrade it now on early basis.
According to oracle it is useless warning and can be ignored but these traces are consuming more than 500MB space per day and we are unable to delete trace files as oracle countinously using those file for writting
it is production database kindly suggest solution other than upgrade.
trace files sid_sxxx_XXX.trc
if we set max_dump_file_size to XXXM or G will it resolve our problem?
or is there any way to flush warnings to new file and delete old one.
Please suggest
Thanks
shah

duplicate thread.
I suggest you don't multipost.
I also suggest you upgrade from Windows 2003 (10 years old and probably desupported)
and 10gR2 (desupported for a few years)
Sybrand Bakker
Senior Oracle DBA

Help needed in Exporting tables data through SQL query

Hi All,
I need to write a shell script(ksh) to take some of the tables data backup.
The tables list is not static, and those are selecting through dynamic sql
query.
Can any body tell help me how to write the export command to export tables
which are selected dynamically through SQL query.
I tried like this
exp ------ tables = query \" select empno from emp where ename\= \'SSS\' \"
but its throws the following error
EXP-00035: QUERY parameter valid only for table mode exports
Thanks in advance,

Hi,
You can dynamically generate parameter file for export utility using shell script. This export parameter file can contain any table list you want every time. Then simply run the command
$ exp parfile=myfile.txt

WARNING:Could not lower the asynch I/O limit to 1056 for SQL direct I/O.

Hi ,
I am getting below warnings in the user dump after upgrading to 10.2.0.5 from 9.2.0.1 on windows server (32 bit)
WARNING:Could not lower the asynch I/O limit to 1056 for SQL direct I/O. It is set to -1
Kindly let me know as to why these warnings are generated in the user dump.
SQL> show parameter synch
NAME TYPE VALUE
disk_asynch_io boolean TRUE
tape_asynch_io boolean TRUE
Thanks,
Sachin

Welcome to the forums !
This seems to be a known issue - pl see these MOS Docs
https://supporthtml.oracle.com/ep/faces/secure/km/BugDisplay.jspx?id=9772888&bugProductSource=Oracle
9772888.8 - Bug 9772888 - "WARNING:Could not lower the asynch I/O ... It is set to -1" messages
Seems to be fixed on 11.2.0.2 (or 10.2.0.5 patch 1 for Windows - see MOS Doc 342443.1 (10.2.0.x Oracle Database and Networking Patches for Microsoft Platforms))
Pl open an SR with Support to verify if this is a cause for concern, as it is not clear from these docs whether this causes any corruption
HTH
Srini

How do I migrate views from MS SQL 2008 to Oracle 11g through SQL Developer

Is there any way to migrate the views from MS SQL 2008 to Oracle 11g through SQL Developer? Please give me some detail steps. Thanks for your help.
Kevin

Hi Kevin,
user13531850 wrote:
Hi Turloch,
When I use migrate to oracle, I got a problem, the migrate tool create a new schema for me in my case (AZTECA_KSMMS), it migrates all the stuffs under that schema (AZTECA_KSMMS). However my application need the all the Oracle data under schema AZTECA instead of AZTECA_KSMMS. Is there any way to specify specific schema (AZTECA) for target oracle database? Schema remapping is available:
First Capture (separately) then during right click convert on the captured model there is a Specify the conversion options with a Object Naming tab where the schema (and other) name changes are editable.
I have not used this recently.
Also during the migration process, when I choose repository, there is a check box for truncate to reset repository to empty state, Do I need to check that truncate Check Box so the repository will be cleared from last migration?The repository can hold multple migration attempts. Check truncate to get rid of previous attempts information. This cleans up the repository - not the destination database.
There are also online database and offline database options during the migration process, what are the difference between these two choices? After I migrated to Oracle, all my views has a red cross icon next to it. Does that mean the view migration is failed or not? Please give me your comments. Thanks for your help.offline: for big (amount of data) databases with simple data types,
uses bcp + files + scripts + sqlldr.
online: for small (amount of data) databases (easier),
uses (Java) jdbc.
The view is likely to be broken - recompiling it may help.
The Oracle schema is created using a .sql file - see under generated in the directory you gave originally in the wizard. There is a .out file that contains the result of running this script including any errors. During conversion there are also likely to be warnings displayed on the UI.
There may be a single issue that is causing multiple issues - if viewa depends on functionb, and functionb is broken, viewa will also fail.
>
Kevin-Turloch
SQLDeveloper Team

WARNING:Could not lower the asynch I/O limit to 160 for SQL direct I/O.

I have some traces with WARNING:Could not lower the asynch I/O limit to 160 for SQL direct I/O. It is set to -1, The OS is windows server 2008 R2 Service pack 164 bits and Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production, How i can solve this warning???

Welcome to OTN
Also Read MOS Note :
Warning:Could Not Increase The Asynch I/O Limit To XX For Sql Direct I/O [ID 1302633.1]
Bug 9772888 - Needless "WARNING:Could not lower the asynch I/O limit to .. for SQL direct I/O It is set to -1" messages [ID 9772888.8]
"WARNING:Could not lower the asynch I/O limit to 224 for SQL direct I/O. It is set to -1" After Upgrading To 10.2.0.5 [ID 1155445.1]

Importing oracle.sql.BLOB through SQL Loader

Hello,
Currently the system we have creates .sql files and executes them. This takes a long time, so we're attempting to change to using SQL Loader. The one problem I'm having that I can't seem to fix is finding out how to imitate the behavior of this SQL statement through SQL Loader:
INSERT INTO KRSB_QRTZ_BLOB_TRIGGERS (BLOB_DATA,TRIGGER_GROUP,TRIGGER_NAME)
VALUES (oracle.sql.BLOB@515263,'KCB-Delivery','PeriodicMessageProcessingTrigger')
I tried creating a lobfile and placing the text oracle.sql.BLOB@515263 within it this way
INTO TABLE KRSB_QRTZ_BLOB_TRIGGERS
WHEN tablename = 'KRSB_QRTZ_BLOB_TRIGGERS'
FIELDS TERMINATED BY ',' ENCLOSED BY '##'
TRAILING NULLCOLS
tablename FILLER POSITION(1),
TRIGGER_NAME CHAR(80),
TRIGGER_GROUP CHAR(80),
ext_fname FILLER,
BLOB_DATA LOBFILE(ext_fname) TERMINATED BY EOF
However, as expected, it merely loaded the text "oracle.sql.BLOB@515263" into the database. So does anyone have any ideas of how to imitate that insert statement through SQL Loader? The only information I have available is the string "oracle.sql.BLOB@515263", no other files or anything to aid with actually getting the binary data.
When the .sql file is run with that insert statement in it, a 1.2kb BLOB is inserted into the database versus a 22 byte BLOB that contains nothing useful when done through SQL Loader.
Alex

My preference is DBMS_LOB.LOADFROMFILE
http://www.morganslibrary.org/reference/dbms_lob.html
did you try it?

Error connecting oracle 11g through SQL Developer

i am using SQL Developer to connect to oracle 11g which is installed to another machine in same network
means i am using a client machine to get connected to oracle installed to host machine through SQL Developer
iam getting this error
network adapter could not establish the connection
vendor code 170002
my listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = his-zoheb.PCSTECH.COM)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
my tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = his-ansari.pcstech.com)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
iam not understanding what is problem
please somebody help

I would say it's vendor code 17002 (not 170002). And such a message is thrown by SQL Developer , unfortunately very generic for any kind of connection problems.
Start sqlplus and try to connect, very likely you get a better error message.
Recently I had such a connection problem and the reason was - No Listener.
Werner

Limit to recards through sql loder

Similar Messages

Maybe you are looking for