Limitations devices for share folios by Adobe Viewer

Hi,
The limitation about use the same Adobe ID with Adobe Viewer for 25 devices start now? with V25. I didn´t find this information in this link - What’s new in this release
Regards
__Felipe

I believe Felipe is referring to the recent eseminar where Zeke said that starting with r26 they are going to start limiting folio access to 25 devices per ID when using the Adobe Content Viewer.  The reason stated was because the internal Adobe security department thought that it was risky for lots of folks to have access to the same folio and would make it more likely that a folio would be altered/corrupted.  Some folks in the eseminar immediately objected in the chat area and John Metzger asked for people to send their use cases to him via email so they could understand why this might be a problem.  John responded to my use case e-mail saying that, "we are examining our initial thoughts around imposing a limit based on customer feedback and some very valid use cases."
So currently it is planned but they may change their minds and find another solution to solve the potential security issue.  This limitation won't happen for another 8 weeks or so (when r26 is released) if it does happen.  That's how I understand the current situation, Adobe folks please feel free to correct me or provide further details.
Andrew

Similar Messages

  • App binary file does not correspond to folios in Adobe Viewer

    I created an app in several different language versions, all connected to the same multi-layer/lingual InDesign files. In Adobe Viewer they look and work fine, however Apple just approved the English language binary update and the app is entirely in Spanish. I tried re-exporting the .ipa file from a previous version (one that was already published in English albeit with bugs- hence the update submission)  and this too shows in Spanish. I tried re-saving all InDesign files with the English language layer turned on and exporting a new version, but once again it shows in Spanish. My client is understandibly very upset as the app is time-sensitive and if we have to wait another week for Apple approval we are in big trouble.
    What is going on and how can I fix it?

    Ok, I'll try it, but I don't understand why this happened in the first place. The English app was ready to be exported before the Spanish version had been sent to "create app," and so in my understanding the exported file should have coincided with what I see in the viewer.
    Melanie De Jesus
    Mobile: +39 392 9932197
    SAY DESIGN s.a.s.
    Il giorno 21/lug/2013, alle ore 16:10, Neil Enns - Adobe <[email protected]> ha scritto:
    Re: App binary file does not correspond to folios in Adobe Viewer
    created by Neil Enns - Adobe in Digital Publishing Suite - View the full discussion
    Are you making a Single Edition application? If so simply changing the layer state and redownloading the application isn't enough. You have to go to the Create App menu item again and go through the App Builder wizard for it to pick up the changed files.
    Neil
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5524671#5524671
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5524671#5524671
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5524671#5524671. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Digital Publishing Suite by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Problem with "small black line in right margin" with Folio Builder / Adobe Viewer in Ipad. Id CC.

    Hi there,
    When I create a Folio Builder and I check my Id project in the Adobe Viewer (It happens in the Ipad App and in the Desktop Viewer), I can see a black line in the right margin (maybe 4 px). And I can't adjust my background (It's an object with a colour) to use the "full resolution available for the app in the ipad", and yes, I'm using rules and I can see that my background object it's 1024 x 768. I have tryed several projects and upgraded the project to the "30 version".
    But I'm a new user with ID/DPS. So, is this a reported bug? Or I'm doing sth wrong?
    And for me, the most important question, will this problem be solved when I send my project to the applestore and DPS transform my Folio to the Store? Or what I see now it's what I will see?
    Thanks!

    Sorry! I have found an answer here in the discussion:
    http://forums.adobe.com/message/5835960#5835960
    So, the problem will be solved in the final app, and it's just the scroll in the Viewer.
    Thanks!

  • Error in Adobe Viewer for iPad

    Hello, guys!
    When trying to dowload a new folio from Adobe Viewer from iPad, the following error paperers: "Ensure that each articles has the same orientation setting, all portrait, all landscape or all dual"
    Any clues on what could be making this error appearing?

    A folio can only either have all article in single orientation (portrait/landscape) or both. Check to make sure all article share the same oreitnation flow throughout

  • Looking for opinions on best new laptops for design work using Adobe Creative Cloud

    Any thoughts on purchasing this device for design work with Adobe Creative Cloud?...HP 15-g077nr 15.6" Notebook with AMD A6-6310 Processor & Windows 8.1

    erinf48698046 wrote:
    4 GB DDR3 SDRAM system memory
    Gives you the power to handle most power-hungry applications and tons of multimedia work
    No. That's wrong. Whatever website you're looking at is out of date. I wouldn't suggest people run AE on less than 16 GB of RAM...
    Anyway, you're not asking about After Effects!
    For Photoshop, 8 GB is recommended. It will run on 4, but...8 is recommended. See this page: System requirements | Photoshop
    Same with InDesign: System requirements | InDesign
    Illustrator, on the other hand, runs just fine with 4 GB: System requirements | Illustrator
    Any other system requirements can be found here: System requirements | Creative Cloud

  • How do I view folios in Adobe Content Viewer on device?

    Hello,
    I have just upgraded to the Creative Cloud. In my newly created folio, I see the icon for Local Folio. How can I get that folio to the cloud, so I can have it downloaded to my device in the Adobe Content Viewer?

    Hi Jo,
    When you create your folio you can preview it by:
    1) Opening the Folio Builder window and clicking Preview > Preview on Desktop at the bottom left
    2) Opening the Folio Builder window and clicking Preview > Preivew on Jo’s iPad at the bottom left (only works if you have Adobe Content Viewer installed and open on a plugged in iPad)
    To actually compile your app and install the development ipa file on your iPad:
    1) Select your Folio in the Folio Builder window
    2) From the top, right flag pull down select “Create App”
    3) This will launch the Digital Publishing Suite App Builder that takes you through the steps to create the ipa file

  • Wrong folio shows in Adobe viewer for windows

    We have produced a folio for ipad 1024x768 and same(almost) folio for iphone 960x640.
    Ipad version (1024x768) will also be published on Windows and Android. When I check in the Adobe Content Viewer on Windows it shows the iPhone version (960x640)
    How can I control that it becomes Ipad version who will open the windows and Andoid viewer?
    We have a folio, 1024x768px for iPad, Windows and Android.
    We have a 969x640 folio that will only be published on the iphone
    We have a enterprise app with custom store front
    How do we solve it
    regards
    Ake

    I'm looking in Adobe content viewer for Windows
    /Ake
    Skickat från min iPhone
    18 sep 2014 kl. 16:49 skrev Neil Enns - Adobe <[email protected]>:
    wrong folio shows in Adobe viewer for windows
    created by Neil Enns - Adobe in Digital Publishing Suite - View the full discussion
    Are you looking in Adobe Content Viewer or a custom app? If so, what’s your custom app name?
    Neil
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6741464#6741464
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Digital Publishing Suite by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Sorry to ask again... sharing folio in Adobe Content Viewer

    First, I'm very impressed with the Adobe Content Viewer and CS 5.5.  IT WORKS JUST GREAT!
    I've uploaded my files and have been able to see my interactive content.
    Thanks for making the viewer a free app, because, according to the posts I've seen, I will be able to share my app, as I test it.
    HOW DO I DO THAT, short of sharing my password to my free acrobat.com account?  I don't want to do that!
    How do I share, without giving everyone my password to my account?
    I realize that they sign up for the free viewer--and their own acrobat account.  But how do they get to my content?  Where do you put THAT address?  Is there a button I'm missing in the content viewer that points to 'other' content?
    I know I'm missing a step...and sure could use a very simple explaination.
    THANKS!
    ADOBE ROCKS, almost all the time!
    nancy

    See the "Share folios" section of this article:
    http://help.adobe.com/en_US/digitalpubsuite/using/WS9293e1fb3b977c5c7b1f65ad12f28224932-7f ff.html#WS9293e1fb3b977c5c7b1f65ad12f28224932-7ffb

  • Folio not showing on Ipad Adobe Viewer

    Is the second time I have a folio not showing up on my ipad adobe viewer.
    This has happened after i delete 4 or more articles from the folio, after deleting them it stops showing in my ipad viewer.
    I researched here before and the solution was to check for the size, (that it was a size made for ipad) and yeah, i checked the size and the size is totally fine 768x1024
    but still doesnt appear.
    what I have to do is to create a new folio and click "copy to" each article to the new folio (from the old one), but the option copy to has to be done one by one, which is very annoying and time consuming. Once all articles are copied the new folio shows up but the old one doesnt.
    Anyone knows why this happens? how can it be solved faster?

    i had this problem once, in the folio producer have you given the folio a name, number and description?
    also in the viewer on the ipad they are not nessecarily in the right order - so scoot about on it
    if all else fails, delete the folio and re-upload, we had a glitch once and the only solution was to re upload
    Tim

  • Can't download folio from Staging Server from Adobe Viewer

    Hello:
    I have uploaded a new publication (235 MB) to the Staging Server (NOT the Distribtuion Server) but when I'm trying to donwload it from the Adobe Viewer, I'm not able to do it. Even the bar shows me "0 MB of 235 MB downloaded", but it never moves. I have a ~100MB HTMLResources.zip file attached with that publication but nor result so far...
    Any suggestions on what could be happening?
    Saludos,
    Leo

    Hello John:
    Thanks for your reply.. I did Publish the folio and I CAN download it really fast on the Distribution Server and watch it fine on the iPad but when I try to download it the same folio on the Staging Server, no luck yet, even both have the same size (and HTMLResourcez.sip file either)
    Any further ideas??

  • How to reset a folio in Adobe Content viewer / Android ?

    I am using a folio in Adobe Content Viewer on a Kobo (android tablet), and I want to reset pages. In the iPad, I tap Three times on the name of the folio. The same action doesn't work in the kobo. Do you know how I can catch it ?
    Thank you for your answer, a lot !

    My fingers must be different than yours
    As soon as I hit the second tap its jumping to the 1st page.
    What is the timing?
    I am working with a Nexus 10 and V29 of the DPS viewer App.

  • Adobe DPS Folio and Content Viewer Query

    Hello,
    I am currently creating folios using the Foilo Overlays and Folio Builder and then previewing them on the Content Viewer on the iPad. My question is after the 1st May will I still have the ability to do this? I don't create app just preview them on my iPad to see how they work. If anyone can give me an answer it would be much appreciated.
    Regards,
    Alan

    Yes, after May 1, you'll still be able to create, edit, and share folios, and you can use Adobe Content Viewer to view folios. You just won't be able to build single-folio apps using a Single Edition or Creative Cloud license.

  • Share folio only in vertical view

    Hi
    I'm sharing a folio that only has the vertical view version but when I share it the users can not download it because the adobe viewer   shows only the horizontal view of the App ( Little icon blue on the left corner of the App cover ). Any help with this issue ??

    I’ve seen cases where that icon didn’t change right away but that has nothing to do with the folio.
    Bob

  • Folio issue - not showing in Adobe Viewer iPad 1

    I have a Folio created at 1024 x 768. It is loaded through the Folio Builder and everything is filled on in the Folio Producer.
    When I log into the Adobe Viewer on an iPad 1, it does not show up.
    My Adobe Viewer is up-to-date.
    The Folio is created for Viewer 20.
    Our Branded Viewer is updated to Viewer 20.
    I also have another version uploaded at 2048 x 1536, it shows up in the Adobe Viewer on iPad 3.
    Anyone have any ideas why is will not show on an iPad 1?

    I am not sure exactly what happened. One of the articles imported, but it wqas scaled down 50%. Due to the size difference it would not load to the Viewer.
    Reloading into the Folio did not work. I created another Folio with that article, loaded it. Then I copied from one folio to another in the Folio Producer.
    Go figure?

  • Hi Apple Team, my iphone can't share files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it becoming difficult for me to share.

    Hi Apple Team, my iphone can't share bluetooth files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it difficult for me to share bluetooth files from my mac bookpro to my iphone, unless i attached it through email.
    We need it to be acceptable to all devices.
    Thank you!

    You can tell Apple directly at the link below.
    http://www.apple.com/feedback/iphone.html

Maybe you are looking for