Line item attachments were missing for the documents in FB03

Hi all ,
i had an issue that within the transaction FB03,  attachments for line items were missing for all the documents that were posted from zprogram (artist statement) but attachments for the header items were displayed .
Is there any clue why these attachments are missing.
help me out of this.................!

Check that that document key has been specified correctly. How are you storing the attachments??

Similar Messages

  • PO Line item attachments going along with the PO o/p to Vendor!

    Hi all,
    We are on SRM 5.0 ECS SP 13.
    I had one question regarding the attachments in the PO line items.If I attach documents at the PO Line item and sent the PO o/p to vendior through e-mail,then all the attachments at the PO line item also go along with the o/p..Is this is  a  std behaviour in SRM 5.0?
    Also if i need to avoid sending of the PO line item attachments along with the PO o/p to the vendor,then I guess the "Internal" indicator for the documents need to be set rt?Is there any way the documents at the PO line item can be set as "INTERNAL"?
    I know this is achived in SRM 6.0 and above and there is an OSS note which mentions that.
    Has anybody worked on something similar?Please share your eperiences/suggestions.
    Thanks!

    HI，Rads:
         I think you should do the inhancements in this situation. I met this question in my last case .Follow is my suggestions ,maybe helpful .
        The   BADI NAME：BBP_OUTPUT_CHANGE_SF（Document Output）
      YOU should chage the code .If you do 't  send the attachment to the vendor ,you should set "Space ",jut like this :
      WHEN 'BUS2200'.
          CV_SMARTFORM = 'ZBBP_BID_INVITATION'.
          CV_SMARTFORM_MAIL = 'ZBBP_OUTPUT_COVER'.
          "exclude attachment
          CS_PARAMETERS-ATTACH_IND = SPACE.
       Then  the attachment will not been sent out ,you can try .
    Alex !
    Bestregards

  • 'Some images are missing because they were deleted from the document'

    Hi,
    I created a document in Pages v5.2 last week and have just opened it and received the following message:
    'Some images are missing because they were deleted from the document'
    When I try and replace the missing images I get the following message:
    'The image "filename" couldn't be inserted.'
    When I try and reimport the original image I get the following message:
    'The image "filename" couldn't be inserted. This image is of an unsupported type.'
    If I try and insert an image that was not in the document before, in the same file format, it goes in fine.
    If I insert the original image into a blank Pages document it goes in no problem.
    I would also like to point out that the data folder still contains lots of versions of images in the document, but does not seem to have any of the ones I am actually using, which I guess is where the problem is. However I have no idea how or why these specific images have been deleted.
    Any light on how this problem has come about, and the best possible way to fix it would be greatly appreciated.
    Alex

    I have Pages v5.2.2 on OS X 10.9.4. I can not reproduce your stated issues with images in this version of Pages. I don't have a solution for you. See my test in the third paragraph. If I were experiencing this behavior, I would perform a Safe Boot to clear out System caches, and try again, before kicking Pages v5+ to the curb.
    The Safe Boot would be pressing and holding the shift key at boot chime, and until a horizontal progress bar shows on the screen. At the eventual login screen, after you type your password — press and hold the shift key — press the right arrow to login, and release the shift key after the Finder menu bar appears. Then reboot normally.
    I have created a new document. Dragged and dropped an image into it and saved. Exited Pages. Reopening worked fine. Deleted the image, and proceeded through the following steps, punctuated by save, exit, reopen, and deliberate image removal. Different .jpg image each time. About mid-way through the following item list, I rebooted the MBA just to throw some "spin" into the process. I did not perform a Safe Boot prior to this series of tests.
    Toolbar > Media insert
    Insert > Choose jpg into document
    Text Box image fill
    Shape image fill

  • IDoc message Document or line item does not exist for invoice reference

    Hello,
    We activated IDoc message type FIDCC2. When cancelling documents which were created before the activation date the cancellation documents aren't posted in the receiving system. Message 'Document or line item does not exist for invoice reference' appears. How can I process these items (the reference document can't exist in the receiving system so the only option is to remove it from the IDoc?)?
    Regards, Jan

    This is just a guide.  Adapt it to your situation.  I get this kind of error message where in the case, someone has marked for deletion a line item in the purchase order.  In this regard, the IDoc errors out because the line item number being referenced is marked for deletion.
    You can either delete the IDoc or have the deletion flag taken off the line item number in the PO or document number to enable you reprocess the IDoc number in question.
    Elias

  • Error M8-688 - Creation of several vendor line items is not possible for document type RN.

    Hello All,
    We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
    Thanks,
    Chandu.

    I dont think that there is any way because it is a hardcoded error message.
          IF NOT t003-xnetb IS INITIAL.
            MESSAGE e688 WITH pi_rbkpv-blart.
          ENDIF.
    SAP is checking the customizing for net/gross posting per document type in table T003
    And if it is set up as net, then it is a hard error.

  • Alert 'There were problems downloading some purchased items' won't clear for the same 6 songs.

    Alert 'There were problems downloading some purchased items' won't clear for the same 6 songs (see screenshot). Every time I download something new this alert comes up, yet when I check for available downloads there aren't any (see second screenshot). Also the 6 songs that are being flagged as having problems are already downloaded to my library, so literally it's just the alert/ notification that seems to be stuck. I've tried signing in and out of iTunes, re-installing itunes, re-starting the computer, emptying the cache etc, and but everytime I sign back in or re-open itunes the alert comes straight back up and it's driving me insane.
    Can anyone help either clear the alert or stop it so that it doesn't pop up every time I try and download something else??

    P.S the error message i got during the download is (err = - 5000)
    Thanks in advance

  • Few line items are not coming at the time of creation of delivery

    Dear Experts,
    When the user creating the delivery few line items are not picking in the delivery document
    the following checks i verified,
    Stock is available
    shpping condition is differ from sold to party and sales document
    Plants are same for all the line items
    why the few line items are not coming in the delivery document creation,
    please help me to sort out this issue
    Thanks and Best Regards,
    Muralidharan S

    Hi,
    Check below points.
    Point 1:
    When you create a delivery document, you create it for a Shipping Point.
    So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
    Others got a different shipping point and that's why it didn't come to the same delivery document.
    Shipping point determined based on below criteria
    - Shipping Condition - From customer master
    - Loading Group - Material
    - Plant  - Delivery Plant of the sales order line item
    You assign a proffered shipping point for above combination in configuration.
    If that combination is not find, those line items are not going in to the delivery.
    You can check the log of the delivery document for more information as well.
    Point 2:
    Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
    Al  Requested delivery dates has to be on or before the  "Selection Date" you entered in the VL01N screen.
    Those line items which has a date more than that will dropped in the delivery.
    Best regards,
    Anupa

  • Page footer information is missing for the first page alone.

    Hi All,
    After exporting to text format, Page footer information is missing for the first page alone. Any reasons?
    Thanks for any help !!
    Rgds,
    Shriram

    If you search the Business Objects Articles (see the link to the left on this page) for Export Limitations documents you'll see that page footers/headers are not supported when exporting to Text format (same for Page N of M.
    If you open up a text file in Notepad - you'll notice that there is no Insert | Page Break (as there is in MS Word).
    CR can't possibly know in advance where the page breaks will occur in a text document (or the application in which the document is opened) so most anything in CR having to do with pagination is not supported when exporting to Text.
    The Export Limitations document is a handy item if you do a lot of exporting.

  • Line item and header records in the same infopackage

    Gurus,
    I wanted to check how can I make sure that I get all the line item documents in the same package with the header document record in the same infopackage? Is there some setting for that? If I am writing a custom extractore how can I make sure of this in ABAP?
    Thanks
    AK

    Dear AKBW,
    This is not very clear why you want to use same infopackage for line-item as well as header data. Normally there are 2 different datasources for line item and for header data.
    Say you are woking with Sales Order Data in ECC.
    So Line-item datasource for sales order data - 2LIS_11_VAITM
    and Header datasource for sales order data - 2LIS_11_VAHDR.
    Now as they are 2 different datasource, so you must need 2 different infopackages.
    Now if you have created one custom datasource in ECC, then just check if its extracting line-item level or header level data. Normally when we create any custom datasource, we try to make it line-item level, to have all the itemwise detail. Though its not mandatory.
    So if you have 2 different datasources (SAP or Custom), you definitely need 2 different infopackages.
    Please let me know, if you still have any more doubt. You can also give me the other detail of the custom datsource you are creating.( type, fields, what it is supposed to extract etc)..

  • "could not get an output file for the document (error RWI 00314)"

    Hi
    We are getting the following error when running the Webi Reports "could not get an output file for the document (error RWI 00314)". The issue seems to be related to Tomcat Memory Heap size, our Tomcat Java heap Size is 1024MB. We were able to resolve  the issue by restarting the Tomcat. We cannot restart the Tomcat in Prod if this is happening frequently.
    Can some one please suggest  any other solution other than restarting the Tomcat frequently, our platform is BOBJ XI 3.1 SP3 with FP 3.1 our Wndows OS is 32 Bit.
    Thank's for your help

    Hi Sreeram,
    Earlier i also faced same kind of problem.
    To solve this kind of problems you need to shutdown the server.
    second thing is when patches missed that time also you will get this kind of problem.
    check j2ee connection is it properly working or not?
    Regards,
    samar reddy.

  • Error " Data missing for the entry check while creating a new waste code

    Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
    This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
    I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
    I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
    I have checked everything several times watching for typos or looking for a missing step.
    I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
    I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
    Phrase set to Z_EHS_WA_WASTE_CATALOG.
    enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
    After matching up the master data It should work fine but I might be missing something to get it running ok.
    ¿Any idea?
    Regards,
    Alvaro

    Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
    1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
    2. Create a copy of the 5 characteristics included in this class.
    SAP_EHS_1024_001_WASTE_CATALOG
    SAP_EHS_1024_001_WASTE_CODE
    SAP_EHS_1024_001_WA_SUBCATEG
    SAP_EHS_1024_001_WA_CATEGORY
    SAP_EHS_1024_001_REMARK
    change the name by
    Z_EHS_WA_WASTE_CATALOG
    Z_EHS_WA_WASTE_CODE
    Z_EHS_WA_SUBCATEG
    Z_EHS_WA_CATEGORY
    Z_EHS_WA_REMARK.
    I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
    I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
    3. Create phrase sets for each new category. with same name.
    4. Match up the master data.
    5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
    I think I have followed all the steps, but for some reason it doesn't find the catalog
    The phrase for the catalog is EWC in english and LER in spanish.
    Regards
    Alvaro.

  • Line items are not appearing for some users

    Hi
    In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
    Regards
    John.

    Hi,
    What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
    Please clarify your issue.
    Regards,
    RS

  • PO Line Item wise gross value for combination of WBS and Material Group

    Hello,
    Our requirement is to get report for PO Line Item wise gross value for combination of WBS and Material Group. Standard report ME2J gives net price but not gross value for Material Line items. Please let me know if any standard report( or ME2J) will suffice this requirement.
    Regards,
    Milind Dumbre

    Dear Milind
    No standard report available to get the PO Line Item wise gross value for combination of WBS and Material Group. Please go for development by taking reference ME2J.
    Warm regards
    Ramakrishna

  • Need a Suggestion For implementing the Digital Signature For the Documents

    Hi,
    Currently I am working in a Document Management System. I need a Good Suggestion for how to implement a Digital Signature For the Documents.
    Thanks in Advance
    Sabarish V

    Hmm, if you are not using Oracle Payroll, what are you using for payroll? I am wondering why you could not use your payroll system, whatever it is, to handle this reimbursement program.
    Well, you may want to talk to Oracle support about how to handle this in Oracle iExpense. You can certainly handle advances for Expense Reports. You would then apply the advance to the expense report items. The catch is I don't think you can stop expense item entry after the adavance is satisfied. You would have to set up a work flow process of some kind to have the expense reports reviewed and only approve expenses that are applied to the advance, is what I am thinking. Not your ideal solution, but something to think about. It could be the Oracle folks might know of a sneaky way to handle this. What you are trying to do is unusual. Employee advances are common, but the idea of not being able to exceed the advance amount is what unusual about this. Normally you will accept any expenses over the advance amount and reimburse the employee for those extra amounts not advanced.
    Good luck.
    John Dickey

  • How can I get INSTID_B for the documents which are stored using Store Business Document functionality

    Dear experts,
    I had activated the functionality of Store Business document and successfully stored documents in external server.
    My client have a custom function module which is used to send emails.In that FM they used SO_DOCUMENT_READ_API1, SO_DOCUMENT_SEND_API1 function modules.They passed Instance Ident(SRGBTBREL->INSTID_B)(eg: FOL33000000000004EXT39000000000026) as export parameter to the FM 'SO_DOCUMENT_READ_API1' and get the attachment details and content.
    Here my problem is I do not have entries in the table SRGBTBREL for the documents which are stored using the Store Business Document functionality and without INSTID_B I am unable to use the FM 'SO_DOCUMENT_READ_API1' to get the document details and content. Please help me to find INSTID_B for documents which are stored using Store Business Document functionality or please let me know if there is any other way to use FM 'SO_DOCUMENT_READ_API1' for documents which are stored using Store Business Document.
    Thanks in advance.
    Regards,
    Kiran

    Hi Kiran,
    You can use the following method to get the information. For example if you want to get BO documents for a customer
    CALL METHOD cl_binary_relation=>read_links
       EXPORTING
         is_object           = ls_lpor
         it_relation_options = lt_relat
       IMPORTING
         et_links            = lt_links.
    then fill  ls_por-instid with a customer number (KUNNR), ls_por-typeid = 'KNA1' and ls_por-catid = 'BO'.
    Table  lt_relat should contain a line option  for each document type (for example 'I' 'EQ' 'NOTE', 'I' EQ 'ATTA', 'I' EQ 'URL', ...
    In table lt_links you will get your information.
    Maybe some other methods of class CL_BINARY_RELATION may also solve your issue.
    Regards,
    Klaus

Maybe you are looking for