Link error AIX 5.1 Ora 9.20 Perfstat library
I cannot install 9.2.0 on my AIX 5.1. The links fail looking for libperfstat. I have bos.perf.perstat installed. Does anyone know what is wrong here?
TIA,
Paul
I cannot install 9.2.0 on my AIX 5.1. The links fail looking for libperfstat. I have bos.perf.perstat installed. Does anyone know what is wrong here?
TIA,
Paul
Similar Messages
-
LINK ERROR AIX 5.2 ORACLE 9.2
I am getting the following error when oracle is going through the link phase of the installation:
$ make -f ins_rdbms.mk ctx_on
/bin/ar -X64 cr /u01/rdbms/lib/libknlopt.a /u01/rdbms/lib/kciwcx.o
ar: 0707-132 /u01/rdbms/lib/kciwcx.o is a discontinued XCOFF64 file.
ar: 0707-126 /u01/rdbms/lib/kciwcx.o is not valid with the current object file m
ode.
Use the -X option to specify the desired object mode.
make: 1254-004 The error code from the last command is 2.
===============================
the ar command is using -X64
oslevel is 5.2.0.0 AIX
HesamI dont think higher version especially 5.1-5.3 will make any difference but oracle 9.2.0.4 will definitely will have an issue. If i am not wrong you need to startup the database with startup MIGRATE option after moving all the files to the new server
May be password file (missed out, but you can always create one)
Init.ora file
make note on Entries in ORATAB -
Error creating Streams example - ORA-01729: database link name expected
Running 11gR1. Example from doc, "4 Single-Database Capture and Apply Example"
the database name is "11G3". when I run the Step 3 statement below, I get the error below. What am I doing wrong? Thanks!
DECLARE
iscn NUMBER; -- Variable to hold instantiation SCN value
BEGIN
iscn := DBMS_FLASHBACK.GET_SYSTEM_CHANGE_NUMBER();
DBMS_APPLY_ADM.SET_TABLE_INSTANTIATION_SCN(
source_object_name => 'hr.employees',
source_database_name => '11G3',
instantiation_scn => iscn);
END;
Error at line 1
ORA-01729: database link name expected
ORA-06512: at "SYS.DBMS_LOGREP_UTIL", line 742
ORA-06512: at "SYS.DBMS_APPLY_ADM", line 726
ORA-06512: at line 5The manual stated to be GLOBAL_NAMES compliant which means DBLINK=target DB_NAME and SID cannot start with a figure. I strongly suggest to pay a careful look to manuals as Streams has a lot of others tricks under the hat awaiting for you.
-
Hi Experts,
I'm finding the below mentioned error while I'm saving assignment with Salary Basis, Location and Payroll.
APP-PAY-06153: System Error : Procedure pay_us_emp_dt_tax_rules.insert_fed_tax_row - ORA-20001: &1 element does not exist or has not linked to pay at step 4.
Please note that I am able to save the record if I do not any one of Salary Basis, Location. Payroll. It is basically happening on creating default tax.
Can anyone pleas let me know if you have facing the above error and resolved?
GuruHi Guru,
Did you check -
Error Saving A Salary Basis - pay_us_emp_dt_tax_rules.Insert_fed_tax_row (Doc ID 302878.1)
Cheers,
Vignesh -
C++ linking error Undefined symbols AIX 5.3 xlC bdb 4.7
I am getting the following linking error while linking the MyCb example given in Berkley DB guide
xlC -bnoquiet -o /ra2/frt_bld/TMPBIN/BDBtest \
/ra2/frt_bld/TMPOBJ/DBAbs.o \
/ra2/frt_bld/TMPOBJ/MyDb.o \
/ra2/frt_bld/TMPOBJ/PPNum.o \
/ra2/frt_bld/TMPOBJ/PPNumStore.o \
/ra2/frt_bld/TMPOBJ/PPNumStoreDB.o \
/ra2/frt_bld/TMPOBJ/UTDbtest.o \
/ra2/frt_bld/TMPOBJ/UTPPNUm.o \
-lC_r ../../../ACE_wrappers/ace/libACE.so -ldb_cxx -L../../../db-4.7.25/build_unix -L/usr/local/ssl -L/../../../ACE_wrappers/ace -lcrypto -lpthread -lz -lm -o /ra2/frt_bld/TMPBIN/BDBtest
ld: 0711-318 ERROR: Undefined symbols were found.
The following symbols are in error:
Symbol Inpndx TY CL Source-File(Object-File) OR Import-File{Shared-object}
RLD: Address Section Rld-type Referencing Symbol
.Db::set_error_stream(std::basic_ostream<char,std::char_traits<char> >*) [1010] ER PR MyDb.cpp(/ra2/frt_bld/TMPOBJ/MyDb.o)
00003b50 .text R_RBR [148] .MyDb::MyDb(std::basic_string<char,std::char_traits<char>,std::allocator<char> >&,std::basic_string<char,std::char_traits<char>,std::allocator<char> >&)
.Db::open(DbTxn*,const char*,const char*,DBTYPE,unsigned int,int) [1012] ER PR MyDb.cpp(/ra2/frt_bld/TMPOBJ/MyDb.o)
00003b84 .text R_RBR [148] .MyDb::MyDb(std::basic_string<char,std::char_traits<char>,std::allocator<char> >&,std::basic_string<char,std::char_traits<char>,std::allocator<char> >&)
ER: The return code is 8.
ld: 0711-317 ERROR: Undefined symbol: .Db::open(DbTxn*,const char*,const char*,DBTYPE,unsigned int,int)
// File: MyDb.cpp
#include "MyDb.h"
#include <string>
#include <iostream>
// Class constructor. Requires a path to the location
// where the database is located, and a database name
MyDb::MyDb(std::string &path, std::string &dbName)
: db_(NULL, 0), // Instantiate Db object
dbFileName_(path + dbName), // Database file name
cFlags_(DB_CREATE) // If the database doesn't yet exist,
// allow it to be created.
try
// Redirect debugging information to std::cerr
db_.set_error_stream( static_cast<std::ostream *>(&std::cerr) );
// Open the database
db_.open(NULL, dbFileName_.c_str(), NULL, DB_BTREE, cFlags_, 0);
// DbException is not a subclass of std::exception, so we
// need to catch them both.
catch(DbException &e)
std::cerr << "Error opening database: " << dbFileName_ << "\n";
std::cerr << e.what() << std::endl;
catch(std::exception &e)
std::cerr << "Error opening database: " << dbFileName_ << "\n";
std::cerr << e.what() << std::endl;
//And then we need the implementation for the close() method:
// Private member used to close a database. Called from the class
// destructor.
void
MyDb::close()
// Close the db
try
db_.close(0);
std::cout << "Database " << dbFileName_
<< " is closed." << std::endl;
catch(DbException &e)
std::cerr << "Error closing database: " << dbFileName_ << "\n";
std::cerr << e.what() << std::endl;
catch(std::exception &e)
std::cerr << "Error closing database: " << dbFileName_ << "\n";
std::cerr << e.what() << std::endl;
Thanks
Anand Rathi
Edited by: user10127683 on Jun 10, 2009 9:02 AMHi Anand,
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/build_unix/aix.html <-- check FAQ #4.
Please use a "-D_LARGE_FILES=1" when building BDB on AIX.
Let me know how it works.
Thanks,
Bogdan Coman -
Database link error when compiling forms 6.0 and forms 6i.
Dear sirs,
We have a database link between two databases of the same version oracle 8.0.5.
Recently we have upgraded one of our databases to version 9.2.0.1 (the database where the database link was originally created ) and now we are having problems when compiling forms that have PL/SQL blocks using the database link.
The error message received when compiling the form is the following:
ORA-02068: Following severe error from dbproduc.world
ORA-00600: Internal error code, arguments: [No conversion op],[],[],[],[],[],[],[]
The forms did not present this error before, it began when we made the upgrade.
Is this a FORMS 6.0 problem ?
Is this an ORACLE 8.0.5 problem ?
Is this an ORACLE 9.2.0.1 problem ?
Can you please give me some advice to solve this problem ?
Thanks in advanceAs I see, when you use a non-oracle database the tables don`t appear, you must create the realation with the table manually, on the properties
-
Report suddenly showing ORA-20001: Error fetching column value: ORA-06502:
Hi,
Some reports in my applications are suddenly showing:
ORA-20001: Error fetching column value: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
instead iof the data they used to show.
In my development system I can fix this by:
1. changing the column alias in my sql
select 'a' alias1 from dual becomes
select 'a' alias2 from dual
2. SAVE CHANGES
3. change column alias back to original
select 'a' alias2 from dual becomes
select 'a' alias1 from dual
4. reorder columns back to original in the 'report attributes' tab
alias1 is now at the bottom of my colum list - i just bounce it up to column 4 using the up arrows
5. SAVE CHANGES
then everything starts working OK again.
There seems to be nothing wrong with my sql as I can make it works on a new page or after I run the above steps, so I guess something is breaking somewhere but I cannot work out what.
Has anyone else seen this? Does anyone know the cause? Does anyone have a fix for this that does not involve the above steps (plus redeployment to prodcution and all the work that involves)?
I am seeing this on version 2.3 and 3.0.
Thanks,
MartinHi Scott,
I think this is want you want (sorry it's not easy to read):
wp.suite_id - Database Column NUMBER - Report Column Based on LOV
wp.project_id - Database Column NUMBER - Report Column Based on LOV
wp.application_order wp_order - Database Column NUMBER - Report Column Standard
lpad(wp.work_package_id,5,'0')||' - '||wp.name wp_name - Database Column NUMBER/VARCHAR2 - Report Column Standard
pt.application_order pt_order - Database Column NUMBER - Report Column Standard
pt.name pt_name - Database Column VARCHAR2 - Report Column Standard
substr(pt.description,1,30) description - Database Column VARCHAR2 - Report Column Standard
pt.application_tier - Database Column VARCHAR2 - Report Column Based on LOV
pt.application_method - Database Column VARCHAR2 - Report Column Based on LOV
pt.TECH_LEAD_ID - Database Column NUMBER - Report Column Based on LOV
This report has no link columns and no derived columns.
Regards,
Martin -
Database Link Error: From Oracle to SQL Servre
Hi,
I am trying to create a database link from my Oracle database to SQL Server. Oacle is 11gR2 on windows 2012 64-Bit same is the OS for SQL Server.
When i execute the query using link, this is the error what i get:
*ORA-28545: error diagnosed by Net8 when connecting to an agent*
*Unable to retrieve text of NETWORK/NCR message 65535*
*ORA-02063: preceding 2 lines from PMS2KPI*
When i look for this error in *listener.ora* file, this is what i found
30-OCT-2014 09:51:48 * (CONNECT_DATA=(SID=pms2kpi)(CID=(PROGRAM=)(HOST=GARMCO\GRBHORDB01)(USER=GARMCO\PMS2Admin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=fe80::54d2:d482:edf0:8543%12)(PORT=52016)) * establish * pms2kpi * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
64-bit Windows Error: 2: No such file or directory
30-OCT-2014 09:51:48 * (CONNECT_DATA=(SID=pms2kpi)(CID=(PROGRAM=)(HOST=GARMCO\GRBHORDB01)(USER=GARMCO\PMS2Admin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.107.145.26)(PORT=52017)) * establish * pms2kpi * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
64-bit Windows Error: 2: No such file or directory
Thu Oct 30 09:52:58 201
When I look for the details in *alert.log* file, i find this
HS: Unable to establish RPC connection to HS Agent...
HS: ... Agent SID = (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(COMMUNITY=tcp.world)(PROTOCOL=TCP)(Host=GRBHORDB01.garmco.local)(Port=1521)))(CONNECT_DATA=(SID=pms2kpi))),
NCR error = 65535 Unable to retrieve text of NETWORK/NCR message 65535
Thu Oct 30 09:52:25 2014
My configuration seems to be ok....
*initpms2kpi.ora file*
#HS_FDS_CONNECT_INFO=[GRBHSQDB01.garmco.local]/KPI
HS_FDS_CONNECT_INFO="SERVER=GRBHSQDB01;DATABASE=KPI"
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=HS_RECOVERY
HS_FDS_RECOVERY_PWD=********
HS_FDS_TRANSACTION_LOG=HS_TRANSACTION_LOG
HS_FDS_TRANSACTION_MODEL=COMMIT_CONFIRM
HS_COMMIT_POINT_STRENGTH=0
*Listener.ora file*
(SID_DESC =
(SID_NAME = pms2kpi)
(ORACLE_HOME = C:\App\Oracle\product\11.2.0\dbhome_1)
(program = tg4msql)
*tnsnames.ora file*
pms2kpi =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (COMMUNITY = tcp.world) (PROTOCOL = TCP)(Host = GRBHORDB01.garmco.local)(Port = 1521))
(CONNECT_DATA =
(SID = pms2kpi)
(HS=OK)
How can I check if some firewall is blocking the connection, or its a port issue... or maybe something wrong in the configuration, but chances are very less for this.
Kindly help if you have gone thru such an error.
Regards, ImranHi,
In the listener.ora you have -
(program = tg4msql)
but with 11g gateways the executable name has been changed and you should change the entry to -
(program = dg4msql)
then stop and start the listener.
If you installed the gateway into an existing ORACLE_HOME then the gateway version must be the same version as the software already installed.
For example, if the existing software was 11.2.0.4 and you installed 11.2.0.1 gateway this will give you problems and most likely the gateway executable will be 0 (zero) in size.
Regards,
Mike -
DB Link Error !!!!!!!
LKM Oracle to Oracle DB link - Error ( Jan 5 2009)
It worked fine on the same day when it got some inputs frm this forum... !!
Hi ,
My Source and Target databases are Oracle...
Since my Source has around 2 million records.....it is taking too much of time in Load Data step....
Intially I was using LKM SQL to Oracle and IKM Oracle Increemental Update...
Looked in to ODI docs and FOrums...it seems LKM Oracle to ORacle (DB Link) would be the fastet way to load the data in target.....
I have a Dblink created between my source and target.... i tested with the SQL it looks fine.............
I created the Topology by mentioning the DBlink name ....
And I straight away ran my interface ......
I am getting this Error:
schema1 is my target schema name.....
When I am using a different LKM it works fine , takes time a lot .....
1917 : 42000 : java.sql.SQLException: ORA-01917: user or role 'schema1' does not exist
java.sql.SQLException: ORA-01917: user or role 'schema1' does not exist
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execSrcOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
I am getting the SAME ERROR again..... user is existing it has all the rights ...but when I run the interface I am getting the Error in the first step when it tries to create a View .........I tried skipping the first step ..it failed in synonymn creations ....
Any suggestions on this ..... ?Please post the details of the application release, database version and OS.
Please see these docs.
Invalid Package FII_AP_INV_PAYMTS_F_C ORA-04052 ORA-00604 ORA-01017 ORA-02063 [ID 888253.1]
How to validate FII Invalid Packages? [ID 1108214.1]
EDW related Invalid Objects [ID 554036.1]
ORA-04052 Error When Compiling HR_EDW_WRK_CMPSTN_F_C [ID 1150935.1]
Thanks,
Hussein -
LKM Oracle to Oracle DB link - Error ( Jan 5 2009)
Hi ,
My Source and Target databases are Oracle..._
Since my Source has around *2 million records*.....it is taking too much of time in Load Data step....
Intially I was using LKM SQL to Oracle and IKM Oracle Increemental Update...
Looked in to ODI docs and FOrums...it seems LKM Oracle to ORacle (DB Link) would be the fastet way to load the data in target.....
I have a Dblink created between my source and target.... i tested with the SQL it looks fine.............
I created the Topology by mentioning the DBlink name ....
And I straight away ran my interface ......
I am getting this Error:
schema1 is my target schema name.....
When I am using a different LKM it works fine , takes time a lot .....
1917 : 42000 : java.sql.SQLException: ORA-01917: user or role 'schema1' does not exist
java.sql.SQLException: ORA-01917: user or role 'schema1' does not exist
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execSrcOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
How can i proceed in this scenario..?
Thanks in advance
Ananda
Edited by: Ananda on Dec 22, 2008 5:15 PM
Edited by: Ananda on Jan 5, 2009 8:54 PMHi ,
I am getting the Same DB link ~Error again. I have granted all the access to the particular schema.
In the first step itself Interface getting failed...!!!!
Step 1. Create view view on source.
When I run an SQL query using DB link , DB link work fine. ( I had a doubt whether the DB link is an issue )
Any advice on this !!
Thanks
Ananda -
Hi All,
I have created a Heterogeneous link on windows ,
I am able to tnsping the SQL server DNS.
but when I am selecting table from SQL server Table ,
SQL> select * from sysusers@SODBL
2 ;
select * from sysusers@SODBL
ERROR at line 1:
ORA-12518: TNS:listener could not hand off client connection
==========================================================Error in alert file===========================================================================
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.60.146)(PORT=1522))(CONNECT_DATA=(SID=SQLSRVRDBLNK)(HS=OK)(CID=(PROGRAM=c:\oraclexe\app\oracle\product\11.2.0\server\bin\ORACLE.EXE)(HOST=TESTENVIROMENT)(USER=Administrator))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.2.0.2.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 11.2.0.2.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.2.0.2.0 - Production
Time: 23-JUL-2013 13:29:07
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
=======================================================================================================================================================
Please suggest me way out ,
Thanks ,
Manishmy TNS ENTRY
SQLSRVRDBLNK =(DESCRIPTION=(ADDRESS= (PROTOCOL= TCP)(HOST=192.168.60.146)(PORT=1522))(CONNECT_DATA=(SID=SQLSRVRDBLNK)(HS=OK)))
DB LINK CREATION SCRIPT :
create public database link SODBL connect to "SA" identified by "SA" using 'SQLSRVRDBLNK';
=================================================================================================================
LSNRCTL STATUS
C:\Documents and Settings\Administrator>lsnrctl
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 24-JUL-2013 12:18:45
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Welcome to LSNRCTL, type "help" for information.
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date 24-JUL-2013 11:54:55
Uptime 0 days 0 hr. 23 min. 55 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oraclexe\app\oracle\product\11.2.0\server\network\admin\listener.ora
Listener Log File C:\oraclexe\app\oracle\diag\tnslsnr\testenviroment\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.60.146)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\PNPKEYipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.60.146)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=testenviroment)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "SQLSRVRDBLNK" has 1 instance(s).
Instance "SQLSRVRDBLNK", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
=======================================================================================================
My Oracle(XE) and SQl(server 2005) server on same machine , Windows XP ,
-thanks
Manish -
Linking Error Compiling OCI Demos with Visual C++
First let me say that I am new to using Visual C++. But my problem is that I am getting a Linking Error when compiling cdemo81.c. The error I get is as follows:
Linking ...
cdemo81.obj: error LNK2001: unresolved external symbol _OCITransCommit
cdemo81.obj: error LNK2001: ...
Debug/cdemo81.exe: fatal error LNK 1120: 14 unresolved externals
Error executing link.exe
I think that the problem is that I am not linking in the OCI executable files correctly. So if someone could help me out, it would be greatly appreciated.Do you link oci.lib? Thats the only lib file you need actially.
If you are using MS VC++, you can add lib path from Tools>Options>Directories.Choose "Library files" from "Show directories for" dropdown list, adn then add you ora.lib path (usually $ORAHOME\oci\lib\).
You also need to add oci.lib in the project settings in the Object/library modules filed of Link tab. Do not forget to add oci.lib for both Debug end Release settings.
Cheers,
Tolkun. -
Linker Error during compiling ODBC WinCE C++_Sample Project
I am devloping a ODBC application for PocketPC2003 using OLite 10g Release 10.3.0.2. before that i am understanding the sample application provided with Olite.
I followed all the instructions provided in ReadMe.txt file available before using VC++ sample. After making all the settings and compiling i am getting following linker errors as mentioned below.
Any solution for this problem at the earliest will be appreciated, i have tried link all the libraries provided with WinCE armv4.
Linker Error Messages:
Error 1 error LNK2019: unresolved external symbol SQLExecDirect referenced in function "public: virtual __cdecl CSQLResult::~CSQLResult(void)" (??1CSQLResult@@UAA@XZ) dbaccess.obj
Error 2 error LNK2019: unresolved external symbol SQLFreeStmt referenced in function "public: virtual __cdecl CSQLResult::~CSQLResult(void)" (??1CSQLResult@@UAA@XZ) dbaccess.obj
Error 3 error LNK2019: unresolved external symbol SQLGetData referenced in function "public: class CRowObj const * __cdecl CSQLResult::Fetch(int)" (?Fetch@CSQLResult@@QAAPBVCRowObj@@H@Z) dbaccess.obj
Error 4 error LNK2019: unresolved external symbol SQLFetch referenced in function "public: class CRowObj const * __cdecl CSQLResult::Fetch(int)" (?Fetch@CSQLResult@@QAAPBVCRowObj@@H@Z) dbaccess.obj
Error 5 error LNK2019: unresolved external symbol SQLFreeEnv referenced in function "public: void __cdecl COLiteDB::Disconnect(void)" (?Disconnect@COLiteDB@@QAAXXZ) dbaccess.obj
Error 6 error LNK2019: unresolved external symbol SQLFreeConnect referenced in function "public: void __cdecl COLiteDB::Disconnect(void)" (?Disconnect@COLiteDB@@QAAXXZ) dbaccess.obj
Error 7 error LNK2019: unresolved external symbol SQLDisconnect referenced in function "public: void __cdecl COLiteDB::Disconnect(void)" (?Disconnect@COLiteDB@@QAAXXZ) dbaccess.obj
Error 8 error LNK2019: unresolved external symbol SQLConnect referenced in function "public: int __cdecl COLiteDB::Connect(void)" (?Connect@COLiteDB@@QAAHXZ) dbaccess.obj
Error 9 error LNK2019: unresolved external symbol SQLAllocConnect referenced in function "public: int __cdecl COLiteDB::Connect(void)" (?Connect@COLiteDB@@QAAHXZ) dbaccess.obj
Error 10 error LNK2019: unresolved external symbol SQLAllocEnv referenced in function "public: int __cdecl COLiteDB::Connect(void)" (?Connect@COLiteDB@@QAAHXZ) dbaccess.obj
Error 11 error LNK2019: unresolved external symbol SQLError referenced in function "public: class CSQLResult * __cdecl COLiteDB::Execute(wchar_t const *)" (?Execute@COLiteDB@@QAAPAVCSQLResult@@PB_W@Z) dbaccess.obj
Error 12 error LNK2019: unresolved external symbol SQLDescribeCol referenced in function "public: class CSQLResult * __cdecl COLiteDB::Execute(wchar_t const *)" (?Execute@COLiteDB@@QAAPAVCSQLResult@@PB_W@Z) dbaccess.obj
Error 13 error LNK2019: unresolved external symbol SQLNumResultCols referenced in function "public: class CSQLResult * __cdecl COLiteDB::Execute(wchar_t const *)" (?Execute@COLiteDB@@QAAPAVCSQLResult@@PB_W@Z) dbaccess.obj
Error 14 error LNK2019: unresolved external symbol SQLAllocStmt referenced in function "public: class CSQLResult * __cdecl COLiteDB::Execute(wchar_t const *)" (?Execute@COLiteDB@@QAAPAVCSQLResult@@PB_W@Z) dbaccess.objHi,
The OLITE forum (Database Mobile Server (inc. legacy Database Lite) would be a better place to post your issue. This forum deals with the ODBC driver that connects to a "normal" Oracle database.
Hope it helps,
Greg
Edited by: gdarling on Nov 12, 2008 8:31 AM -
Hi,
Please help me with this broken link error in Office Excel 2010. Thank you.
The problem is: a broken link cannot be removed from the file. The link was used in data validation, which refers to a list of values. After the path was corrected, it still shows there’s a broken link. Here are the details:
I have 4 files named “000TVA_Test – 3”, “000TVA_Test – 4”, “000TVA_Test – 5”, and “000TVA_Test – 6”. The posterior files were developed based on the previous files.
In Test-3, sheet “Template “, cell “L4”, “O4”, “R4”… were built as dropdown list using data validation. The list source is in the “Library” worksheet. There’s no problem so far.
Test-4 was firstly copied from Test-3. In this file I renamed the worksheet from “Library” to “Setting” and the link was broken from here. I can also fix the broken link in this file. (While I didn’t realize there was a broken link.)
In Test-5 I fixed the path, but every time when opening the file, the broken link still shows.
In Test-6 I’ve removed the data validations. The broken link is still there.
I tried to find solutions online. I tried common methods, cannot find anything in the files is still using links. I also tried the “findlink.xla” add-in, but it only worked for Test-4, and couldn’t find the link in other files.
Please help. Thank you!
I uploaded files here: https://onedrive.live.com/redir?resid=1A97736E0ABBAA41!113&authkey=!AF5wAd9rwUPnYyE&ithint=folder%2cxlsm
Thanks again!Hi,
Based on my tested the files downloaded, I found that Test-5 & Test-6 included the "A defined name that refers to an external workbook", Test-4 had not. (Please click Formula Tab>Name Manage, you'll see them.)
However, the Break Links command cannot break the following types of links:
A defined name that refers to an external workbook
A ListBox control with an input range that refers to an external workbook.
A DropDown control with an input range that refers to an external workbook.
http://support2.microsoft.com/kb/291984/en-us (It also applies to Excel 2010)
Thus, we'd better try the workaround: re-build the Test-5 & Test 6.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
ERROR at line 1:ORA-01012: not logged on
Hi ,i installed OID and the owner of the binaries and database(repository ) is Oracle and then i cahnged the permissions to 775 and now when i am trying to logon to a db(locally) using a different user x who is member of DBA group its saying not logged on .Is something wrong with permissions?
env|grep ORA
ORACLE_SID=oidtest
PS1=[${ME}:${UNAME}:${ORACLE_SID}] ${PWD} >
ORACLE_HOME=/amoidts1/OID
[amoidts1:panther:oidtest] /home/amoidts1 > sqlplus
SQL*Plus: Release 10.1.0.5.0 - Production on Wed Nov 21 19:24:37 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: / as sysdba
Connected.
SQL> select * from v$database;
select * from v$database
ERROR at line 1:
ORA-01012: not logged onWhat oracle version?
Probably there is not enough OS resources.
*Process J000 died, kkjcre1p: unable to spawn jobq slave process [ID 833613.1]*
Maybe you are looking for
-
Thanks to Gilad D67 for showing me how to have multiple drop down menu items appear in a separate text box. This stuff blows my mind. Is there any script I can use to make a new drop down menu item appear in the same text box, but on a new line below
-
JTextField in a FullScreen JWindow jdk1.4
I have a problem that must have a simple solution I hope. I have a JWindow wich I run in fullscreen mode, the contentPane of the JWindow contains a JPanel wich contains JButtons, JLabels and JTextFields I have no problem with the JButtons and JLabels
-
Cant print envelopes from mail merge
I am trying to print address on envelopes from a mail merge and my HP photosmart plus B210 keeps defaulting to the photo try even though I have selected main try and that is where the envelopes are. Please help, thanks!
-
Switching hosts to Adobe business catalyst...
I am looking to utilize the in-broswer editing feature via Adobe business catalyst, but my clients website is hosted from a different source. Is there a way I can switch over to Adobe Business Catalyst and keep the same URL? Looking to be able to pas
-
Hey everyone, I was wondering if forums are compatible with iweb. I want to create my own forums. If so what is recommended in making a forum. thank you