Link Server SQL 2012 a 2000

Hola a todos por favor necesito urgente ayuda.....
Necesito crear un link server en SQL 2012 para que se conecte SQL 2000 plissssss

Kevin, gracias por responder... por lo que pude investigar en algunos foros dicen que se puede pero debo instalar un Cliente 10.0 y despues crear un ODBC
y traves de este script crear el Link server
-- Re-create LinkedServer [NorthWind2000] by using the ODBC connection:
EXEC master.dbo.sp_addlinkedserver @server = N'NorthWind2000', @srvproduct=N'', @provider=N'MSDASQL', @provstr=N'DRIVER={SQL Server};SERVER=NorthWind;Trusted_Connection=yes;'
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'NorthWind2000',@useself=N'True',@locallogin=NULL,@rmtuser=NULL,@rmtpassword=NULL
GO
despues del script crea el link pero al realizar un test de conexion me da el error de abajo
TITLE: Microsoft SQL Server Management Studio
The linked server has been updated but failed a connection test. Do you want to edit the linked server properties?
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The OLE DB provider "ODBCSQL10" has not been registered. (Microsoft SQL Server, Error: 7403)

Similar Messages

Linked Server : SQL 2012 to 2000 error - Microsoft Distributed Transaction Coordinator (MS DTC) has stopped this transaction.

Hi all,
If any one has worked around this error and can help ?
Msg 8522, Level 16, State 3, Line 1
Microsoft Distributed Transaction Coordinator (MS DTC) has stopped this transaction.
I am trying to connect from sql 2012 to 2000 server. Established linked server using native client 10. I am able to see catalogs and database and table. Just when I am trying to query i am getting above error.
any help is really appreciated.
Thanks
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach

Hi Logicinisde,
What the new error message do you get after using the workarounds in this
blog? Please post it for analysis.
Besides, as SQL Server 2012 has stopped connecting to SQL Server 2000 via linked servers, personally I recommend you upgrade SQL Server 2000 to a higher version to make your queries or ETLs efficient.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Linked Server SQL 2008 64 bit Windows Server 2008 64 bit

Hello there,
I'm trying to access my customers Oracle database with a SQL Linked Server. The error I get is:
Cannot create an instance of OLE DB provider "OraOLEDB.Oracle" for linked server...
I did the following steps:
1. Installed Oracle client 10g with a custom installation and selected everything.
2. Created a tnsnames.ora
dev =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dijkora01)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = dev)
3. Tested this with tnsping dev, which said that the connection is OK.
4. Activated 'Allow inprocess' for my OraOLEDB.Oracle provider for the linked servers in my SQL Server Management Studio.
5. Created a new linked server with:
Linked Server: IAP
Provider: Oracle Provider for OLE DB
Product name: Oracle
Data source: dev
In the security tab I activated 'Be made using this security context'. When I now press 'OK' I get the above error message.
Can someone help me with this?

Windows 7 Enterprise 32-Bit
Installed the version 12 for 32 bit ODAC and it worked. The key is to Install as Administrator once it is unzipped.
Was able to set up Listener then
Was able to set up ODBC using the ODAC. Connect MS Access 2010 to the Oracle views.
Then, tried to install the 64 Bit onto Windows 2008 Server.
It locked up during installation both times.
Installed ODAC without an error.
However, the ODBC setup will not provide a list of the servers in the ODBC TNS Service Name listbox for Server 2008.
In Windows 7, it populates the TNS Service Name.
The list box in Windows 2008 is empty.
Do you know what would cause that?
The .ORA file scrips look the same on Windows 2008 as they do on Windows 7 except it does not have the (server = Dedicated) argument.
Thanks.

Linked Server - SQL Server 2008 R2

I want to use AD groups which I have given access to SQL Server to utilitize a linked server but it does not allow this. It gives "Anonymous Login not allowed". I have checked the box - "Be made using the login's current security
context". The group is setup on both servers (Running SQL Server 2008).
Any help is appreciated!

Please check below link:
http://www.sqlservercentral.com/Forums/Topic807231-1526-1.aspx
None of the parameters are accepting windows group.
from BOL also:
[ @locallogin = ] 'locallogin'
Is a login on the local server. locallogin is sysname, with a default of NULL. NULL specifies that this entry applies to all local logins that connect tormtsrvname.
If not NULL, locallogin can be a SQL Server login or a Windows login. The Windows login must have been granted access to SQL Server either directly, or through its membership in a Windows group granted access.
[ @rmtuser = ] 'rmtuser'
Is the remote login used to connect to rmtsrvname when @useself is FALSE. When the remote server is an instance of SQL Server that does not use Windows Authentication, rmtuser is
a SQL Server login. rmtuser is sysname, with a default of NULL.
Best Wishes, Arbi; Please vote if you find this posting was helpful or Mark it as answered.

ISSUE Sharepoint 2013 databases for reporting services on the second server SQL 2012

Hello,
I have server A: Operating system windows 2012 standard, SQL server 2012 standard
instance: Sharepoint contains data for sharepint
instance: Reporting should be contain databases for reporting
Server B:
Windows server 2012 standard contains installation Sharepoint 2013
Sharepoint works (without reporting services), it is OK - databases are located on server A:
My issue is:
When I have installed reporting services on server B, I have already installed SQL server 2012 on server B, it works.
I am able to create report in report builder adn place it in to sharepoint.
But I would like to use only one full SQL machine on server A:
When I reconfigure repoting settings on server A in central administration - manage service aplications,
On the SQL server A in instance reporting , there is automatically created databases. It is no problem.
But the first difference is, when I want to manage service aplication for reporting in
Provision Subscriptions and Alerts, there is information
SQL Server Agent state cannot be determined
When I want to create report in report builder, I have issue:
server A-7380mw016\reporting it means server A with full SQL server:
The Test of connection was successful
Then I have clicked test connection
I have recieved this screen with fail: Logon faild for user NT Authority\anonymous logon
My account belongs to SQL admin on server A (A-7380mw016\reporting) I do not know it is not possible to create report, when it is possible to test connection in the first step and in the second step, there is problem...
Please, can somebody help me?

Hi,
Since you are getting an Anonymous Logon error, it appears there may be a problem passing your credentials to the SQL Server Agent Service. This would indicate a Kerberos issue. See this thread for details:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/46b7c773-6a77-435d-b471-cb9a6ec41c43/has-anyone-else-upgraded-reporting-services-to-denali-2012
Microsoft Virtual Academy: Breakthrough Insights using SQL Server 2012 : Analysis Services and Credible, Consistent data (Module 2) - Configuring and Securing Complex BI Applications in a SharePoint 2010 Environment with Microsoft SQL Server 2012
http://technet.microsoft.com/en-us/video/Video/hh858469
Tips from the video:
We are connecting to Reporting services using Kerberos when using Reporting Services in SharePoint integrated mode
For the account using reporting services, we just need a dummy SPN. We go to Attribute editor tab in AD for RS account. And then we will be enabled with Delegation tab.
In Delegation tab. I we are using claims to windows token, we need to use "Trust this user for delegation to specified services only"
There you have 2 options: "Use Kerberos only": It means I only want to delegate in the situation where the service that is doing the delegation actually has the Kerberos ticket to start with
"Use any authentication protocol" When we need protocol transition (like from NTLM to claims for intra farm communication)
We need to delegate this to SQL server.
Please check out these articles as well:
How to configure SQL Reporting Services in SharePoint Server for Kerberos authentication
http://support.microsoft.com/kb/2723587
Configure Kerberos authentication (Office SharePoint Server)
http://blogs.technet.com/b/mbiswas/archive/2009/07/10/configure-kerberos-authentication-office-sharepoint-server.aspx
Thanks.
Tracy Cai
TechNet Community Support

Linked Server from SQL 2008 to Connect to 2012 read only replica never works

I have two Production Database Servers
1. SQLServer2008 (2 Nodes Cluster)
2. SQLServer2012 with 2 read only replica (3 Nodes Cluster)
I would like to draw a line here, We have routing table and URL working perfectly fine.
We have tested LINKED Server from 2012 Box to production Server by Specifying APPLICATIONINTENT = ReadOnly; it works perfectly fine, the routing is being used.
When we create linked server from SQL Server 2008 Box (Please note we have installed SQL Server 2012 Client tools on this box and Restarted the Servers) using the below script
USE [master]
EXEC master.dbo.sp_dropserver @server=N'AGL1', @droplogins='droplogins'
GO
EXEC master.dbo.sp_addlinkedserver @server = N'AGL1'
,@datasrc='AGL1'
,@provider='SQLNCLI11'
,@provstr='ApplicationIntent=ReadOnly;Database=AdventureWorks2012'
Linked Server is created, Now when I run the Query
exec ('select @@servername') at AGL1
It always brings the Primary READ/WRITE node name only, after lots of research I found that, this linked Server is always using SQL Native Client 10.0 only, even after creating Linked Server using SNC 11, That is the reason it is not going to routing
table. Its always connecting to Primary node.
Below is the way I found it, on 2012 Production Server I executed below Query
SELECT session_id, protocol_type, driver_version =
CASE SUBSTRING(CAST(protocol_version AS BINARY(4)), 1,1)
WHEN 0x70 THEN 'SQL Server 7.0'
WHEN 0x71 THEN 'SQL Server 2000'
WHEN 0x72 THEN 'SQL Server 2005'
WHEN 0x73 THEN 'SQL Server 2008'
ELSE 'SQL Server 2012'
END,client_net_address ,client_tcp_port,local_tcp_port ,T.text
FROM sys.dm_exec_connections
CROSS APPLY sys.dm_exec_sql_text(most_recent_sql_handle) AS T
The help is taken from msdn (Link Provided below) for the above Query
https://msdn.microsoft.com/en-us/library/dd339982.aspx
and I found it always uses SQL Server 2008 SNC.
My Question is, is there a way to force SQL Server to use SQL Server Native Client 11.
Has anyone tried this setup?
Thank you in advance.

Unfortunately no, there is no other way of forcing it without restart. The SQL Server stack has no idea of the existing Native Client as it booted prior its installation. And you cannot force "DLL reload" without proper service restart.
Ivan Donev MCT and MCSE Data Platform

Sql 2012 server for SCCM 2012 - Agent not starting

Hi ,
In our environment we have a Sql 2012, and it was working fine till now. but after installation of RDP role and subsequent installation of certificates for remote desktop in the SCCM server ( SQL 2012 is
installed in it)
we are facing the issue - Sql server management studio not connecting ( windows authenticaltion)
1) A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)A
2) I tried starting the sql agent service in services.msc and the below error came
The SQL Server Agent (MSSQLSERVER) service on Local Computer started and then stopped.
Some services stop automatically if they are not in use by other services or programs.
3) In the Sql Server configuration manager also tried starting the sql agent but
The request failed or the service did not respond in a timely fashion.
Consult the event log or other applicable error logs for details.
The widows event logs show this error
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection.
The TLS protocol defined fatal error code is 20. The Windows SChannel error state is 960.
We have removed the certificate and the RDP role in that .
Can anyone please help on this
Anand M

I would check for error messages in the SQL Server ERROLOG file and also Agent's SQLAGENT.OUT file.
Tibor Karaszi, SQL Server MVP |
web | blog

Query via linked server to DB2/NT gives different results

I have a DB2 9.7 database I need to query. I'm testing from four separate SQL Servers.
ServerA - SQL 2012 SP2
ServerB - SQL 2012 SP1
ServerC - SQL 2012 SP1 CU1
ServerD - SQL 2012 SP1
I set up a linked server from ServerA. I run QueryA, and am happy with the results.
I create a linked server from ServerB. I run QueryA and get the message, "Error converting data type DBTYPE_DBDATE to datetime."
I did the same test on ServerC. It works fine.
If, inside OPENQUERY, I convert the datetime to a varchar, call it QueryB, it mostly works, but will be missing a small percentage of datetime values from that converted column when run on ServerB. If I run QueryB on the on ServerA, those missing
values are there. Same for ServerC.
At this point, I can think only that the main difference is the service pack and CU level. I can't find any documentation on updates that are relevant, but doesn't mean much.
Then, I did the same test on ServerD. ServerD is at the same SP/CU level as ServerB. ServerD worked just fine. Apparently it's not the service pack or cumulative update level making the difference.
My setup: On each server I loaded MS OLE DB Provider for DB2 Version 4.0. I used the same sp_addlinkedserver script with the same connection string on each server. QueryA and QueryB both used OPENQUERY. They were identical except for the CAST to varchar
for a datetime field. This CAST became a call to a function VARCHAR on the DB2 server in later tests with the same result.
Of course, the only place I actually need this working is ServerB.
tia,
Steve

Sure, with some obfuscation and shortening.
On each server, (except the first where I had to figure it out), I went through the same process.
Load MS OLE DB Provider for DB2 Version 4.0 version 9.0.1390.0
Run the Create Linked Server query
Run QueryA.
Only on ServerB has this been a problem.
--Create Linked Server
EXEC sp_addlinkedserver
@server='LinkedServer',
@srvproduct='Microsoft OLE DB Provider for DB2',
@catalog='DBName',
@provider='DB2OLEDB',
@provstr='Provider=DB2OLEDB;User ID=Username;Password=Password;Initial Catalog=DBName;Network Transport Library=TCPIP;Host CCSID=1252;PC Code Page=1252;Network Address=127.0.0.1;Network Port=50000;Package Collection=MSDB2COL;Process Binary as Character=False;Units of Work=RUW;DBMS Platform=DB2/NT;Use Early Metadata=False;Defer Prepare=False;DateTime As Char=False;Rowset Cache Size=0;Datetime As Date=False;AutoCommit=True;Authentication=Server;Decimal As Numeric=False;Derive Parameters=True;LoadBalancing=False;Persist Security Info=True;Cache Authentication=False;Mode=Read;Connection Pooling=False;'
--QueryA
SELECT * FROM OPENQUERY(LinkedServer,'
SELECT [ARRIVAL]
      ,[ACCT_CODE]
      ,[ACC_EVENT_ID]
      ,[TRANS_DATET]
      ,[AVAIL_DATE]
      ,[AVAIL_STATUS]
FROM [DBName].[UserName].[TableName]
') AS TableNameLink
--QueryB
SELECT * FROM OPENQUERY(LinkedServer,'
SELECT [ARRIVAL]
,[ACCT_CODE]
,[ACC_EVENT_ID]
, CAST([TRANS_DATET] AS VARCHAR(26)) TRANS_DATET
,[AVAIL_DATE]
,[AVAIL_STATUS]
FROM [DBName].[UserName].[TableName]
') AS TableNameLink
--QueryC
SELECT * FROM OPENQUERY(LinkedServer,'
SELECT [ARRIVAL]
,[ACCT_CODE]
,[ACC_EVENT_ID]
, VARCHAR([TRANS_DATET]) TRANS_DATET
,[AVAIL_DATE]
,[AVAIL_STATUS]
FROM [DBName].[UserName].[TableName]
') AS TableNameLink

Error 25109 - APP-v & SQL 2012

Hello,
I have a question about the installation of the APP-V management server. I Have a TEST LAB with the following setup:
VM: DC W2k8 R2;
VM: APP-v 4.5SP2 managent server
SQL 2012 installed on APP-v server
I Constantly get the following error message when i try to install the management server: "Error 25109. The installation program could not create the configuration data store. Please see the installation log file file for more information."
I've tried different things:
Used the domain admins group for installing the managent server;
tried domainname\domain admins group for installing the managent server;
Uninstalled frame Work 4.*
Does anyone have an idea?
Martin

Have you confirmed that you can actually connect to the remote SQL Server?
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer"
if a marked post does not actually answer your question). This can be beneficial to other community members reading the thread.

SQL 2000 LINKED SERVER ERROR 7303 WITH SQL 2012 ON WINDOWS SERVER 2012 R2

Hi all,
I have a problem with SQL Server 2012 and a linked server for SQL 2000 database.
System specification:
Windows server 2012 64 bit
SQL SERVER 2012 64 bit
REMOTE SERVER SQL 2000 32 bit
I've installed sql native client 32bit,create a SYSTEM DSN odbc connection with "SQL Server" driver named "MYSERVER".
Create a linked server with the query below in SQL 2012:
EXEC master.dbo.sp_addlinkedserver @server =N'MYSERVER', @srvproduct=N'MYSERVER', @provider=N'MSDASQL', @datasrc =N'MYSERVER', @location=N'System';
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'MySERVER',@useself=N'True',@locallogin=NULL,@rmtuser=NULL,@rmtpassword=NULL
GO
but when i browse the linked server i receved error 7303.

You need 64-bit MSDASQL. It is the bitness of the server you are connecting from that matters. 64-bit executables cannot hook into 32-bit DLL.
However, I suspect that you will not get things to work anyway. At least I have not seen anyone this far who has been able to set up a linked server from SQL 2012 to SQL 2000. I know that when I tried this, the following providers had this result:
SQLNCLI11 - does not support connections to SQL 2000.
SQLNCLI10 - failed with some obscure message that I don't recall.
SQLNCLI - Don't recall that the problem was here.
SQLOLEDB - SQLOLEDB is always replaced with the most recent version of SQLNCLI, so this fails because of lack of support.
I don't think I got through all version of the ODBC drivers, though.
Erland Sommarskog, SQL Server MVP, [email protected]

SQL server 2012 link server 2000

I am trying to link an SQL Server 2000 to SQL Server 2012.
From the management studio i am giving the configuration below
Other data source
Provider --> SQL Server Native Client 10.0
Product name: SQLSERVER
Data Source: machines_ip/Servername
Provider string: (null)
Catalog: (null)
Security Tab
Be made using this security context: (credentials)
Server Option Default except of changing RPC out to True
I get the error 7302 but and help returns no results:
There is no additional information about this issue in the Error and Event Log Messages or Knowledge Base databases at this time. You can use the links in the Support area to determine whether any
additional information might be available elsewhere.
What am i missing?

can check with
In SQL Server Enterprise Manager, open \Server Objects\Linked Servers\Providers, right click on the provider, select
properties and check the "Allow inprocess" option and set 1. Recreate your linked server and test again.
13down
vote
In SQL Server Enterprise Manager, open \Server Objects\Linked Servers\Providers, right click on the OraOLEDB.Oracle provider, select properties and check the "Allow inprocess" option. Recreate your linked server
and test again.

SQL 2012 Linked Server connection from SQL 2000

Hi,
Does anyone know if it's possible to create a linked server connection in SQL 2000 to a SQL 2012 instance?
If so, which provider should I use?
Many Thanks,
Phil

Hi Shanky,
I'm afraid you misunderstood my Q. The above posts show how to create a linked server connection FROM SQL2012 --> SQL 2000.
I'm trying to create a linked server connection FROM SQL 2000 --> SQL 2012.
Does anyone know if it's possible?
Many Thanks,
Phil
I guess you dont read posts patiently below link ,which i also posted in my first reply, has details about the same
http://social.msdn.microsoft.com/Forums/en-US/2e02c603-e28d-49eb-b073-548c59732b5d/linked-server-from-sql2012-to-sql2000?forum=sqlsetupandupgrade
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Memory leak issue with link server between SQL Server 2012 and Oracle

Hi,
We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue. For more context please refer to the link.
http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012. I could not find any article that talks about if this issue was fixed by Microsoft in later version.
We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
We wanted to know if this fixed in SQL Server 2012 ?

So your question is more of a information type or are you really facing OOM issue.
There can be two things for OOM
1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used. Did you made sure that you are using latest version.
What is Oracle version you are trying to connect(9i,10g, R2...)
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Linked Server unable to Connect in SQL Server 2012 after Restarting SQL Server Service it works fine. Why?

I have created a Linked Server to Access Database of 64 MB in Size located in Remote System to SQL Server 2012.In Start for Some time it works fine and after it is giving the Error
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Previously I thought it as Permission Issue. By trying some fixes proposed in forums it not fixed. But, after restarting the SQL Server Services without changes to the linked Server it works perfectly. How could i fix it. I don't want restart the SQL Server
Service it leads to Some other process failures.
RehaanKhan. M

After all the Errors, When I am restarting the SQL Server its working correctly.
Whats the problem it is clearing itself after restarting of SQL Server. Why ?. I can't find anything regarding this in SQL Server .
The following are the Errors i got connecting to SQl Server.
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.".
Msg 7303, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
Error-2:
Executed as user: RMS\Administrator. Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST". [SQLSTATE 42000] (Error 7303) OLE DB provider
"Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" returned message "Cannot open a database created with a previous version of your application.". [SQLSTATE 01000] (Error 7412). The step failed.
After unchecking the Allow In Process in OLEDB.ACE Provider Properties.
Msg 7399, Level 16, State 1, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST" reported an error. Access denied.
Msg 7301, Level 16, State 2, Procedure Insert_Records_Into_Actual_Calls_History, Line 29
Cannot obtain the required interface ("IID_IDBCreateCommand") from OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "LANDLINE_TEST".
for to fix above error i have followed the instructions in the following link,
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2010/08/19/permissions-needed-to-set-up-linked-server-with-out-of-process-provider.aspx
This also failed to work. I Restarted SQL Server and make the Linked Server Properties Default to my Configuration and it works fine.
Can you suggest me a solution for this issue. Every time i don't want to restart SQL Server Services as it effects other jobs and Processes.
Thank you.
RehaanKhan. M

Linked Server error: Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON' between sql server 2005 32 bit and sql server 2012 64 bit

Hi All,
Here the linked server is created between sql server 2012 64 bit and sql server 2005 32 bit. I am getting the below error when i try to access linked server from third server. I have created linked from Instance 1 to Instance 2. When i access it from
instance 3 i am getting the below error. SPN setting has been done between these 2 servers. Also the option 'Trust the delegate' is enabled for the both the service account.
'Login Failed for user 'NT AUTHORITY\ANONYMOUS LOGON'
Appreciate your quick response.
Vikas.M.S

Hello,
Please read the following resources:
http://www.databasejournal.com/features/mssql/article.php/3696506/Setting-Up-Delegation-for-Linked-Servers.htm
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ea26de43-4c6b-4991-86d7-e1578f107c92/linked-server-login-failed-for-user-nt-authorityanonymous-logon?forum=sqldataaccess
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Link Server SQL 2012 a 2000

Similar Messages

Maybe you are looking for