Link to download Sql Server 2012 "Standard Edition"
We have purchased Sql Server 2012 “Standard” edition license. Looking for the link to download of installation software for 2012 “Standard” edition. Have tried
a lot but could only found - the “enterprise” evaluation copy.
Looking for urgent help on this. Thanks.
Thanks for the update.
1. Would like to check if it is possible to download Sql Server 2012 “Standard" Edition straight away rather than doing a two step install?
2. Assuming we do a two step install - during upgrade once we specify the license key, would it ask whether we need to change edition to standard/ enterprise or it automatically determines the edition based on the value of the license key?
Hi,
1.Do you have MSDN subscription ? You can download from MS link directly if you have one. Please ask the vendor who provided you with License he would be best person to call.
2. On license page you just have to enter license key that's it , after that SQL Server just knows what it has to do. It does not asks you anything about license it just proceeds
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP
Similar Messages
-
Where can i download SQL Server 2012 Standard Edition?
Hello everyone!
I have bought 2 open licenses for SQL Server 2012 Standard Edition for my application.
I want to download from microsoft site the SQL Server 2012 Standard Edition software in order to install it to my servers but as i searched in microsoft's site, i can't find
Stanard edition for downloading. I only find Express and Evaluation.
Can you please help me?
- Thanks -Hello,
Please try to download the Evaluation Edition from the following link and provide the Standard Edition key on the Product
Key page of SQL Server setup.
http://www.microsoft.com/en-us/download/details.aspx?id=29066
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Hi
I have recently bought a Virtual Machine from a data center and installed a Windows Server 2012 Standard Edition on it. As I tried to install the SQL Server 2012 Standard Edition, the data center administrator denied me to do this telling me it is not possible
to install any licensed Microsoft software on a Windows installed on virtual machine created by Hyper-V. It was really strange for me! I wanna know if this is true.
Thanks EverybodyHi Farid,
For SQL server running on virtual server please refer to following article :
http://blogs.technet.com/b/peeyusht/archive/2010/03/19/sql-licensing-under-virtualization.aspx
In addition , for license issue we still recommend you to contact MS Activation Center:
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
I can't seem to find any clear answers to the implications of installing SQL Server 2012 standard edition vs. enterprise in regards to SharePoint 2013.
I understand that to get many of the features you need Enterprise edition of SQL 2012; but, what I can't figure out is if the backend SharePoint SQL 2012 is standard; but, the PowerPivot/SSRS server is Enterprise will we still get the features?
If we have 3 tier SharePoint farm, one of those tiers is for the SQL Server database backend. If that SQL instance is 2012 standard and we add another server to the farm w/ SQL 2012 Enterprise to handle the tabular models, PowerPivot, and SSRS in integrated
mode will we still get the features?
Or, can we (should we) install Enterprise 2012 as the SharePoint database backend and let that instance triple down as also the PowerPivot and SSRS instance?
The Degenerate DimensionHi MMilligan,
SQL Server 2012 Standard is not supported PowePivot for SharePoint . In addition, SQL Server 2012 Standard is also not support some Reporting Services Features.
For more information, please refer to Features Supported by the Editions of SQL Server 2012:
http://msdn.microsoft.com/en-us/library/cc645993.aspx.
Install SQL Server BI Features with SharePoint 2013 (SQL Server 2012 SP1):
http://msdn.microsoft.com/en-us/library/jj218795.aspx.
If you have any problem, please feel free to let me know.
Thanks.
If you have any feedback on our support, please click
here.
Maggie Luo
TechNet Community Support -
Is Cross Subnet Failover supported in SQL Server 2012 Standard edition?
Hi,
I'm trying to find out if Cross Subnet Failover is support in SQL Server 2012 Standard edition? From the documentation I can find it appears that AlwaysOn Failover Cluster Instances is supported for two nodes but there is no definitive answer regarding Cross
Subnet failover. Just trying to figure out if it is possible or if I need enterprise or move my replication nodes on the same subnet.
Thanks DavidSorry chaps, found the answer :-(
Licensing SQL Server for High Availability
SQL Server software can be configured so that if one server fails, its processing will be picked up, recovered
and continued by another server. All editions of SQL Server 2012 provide basic high availability features
including backup log shipping, database mirroring and two-node failover clustering. Advanced (AlwaysOn)
high availability features in SQL Server 2012 Enterprise Edition include enhanced support for multiple, active
(readable) secondary servers and support for multi-site failover clustering. -
Download sql server 2012 developer edition
where to download sql server 2012 developer edition
On MS site everything goes to 2014 or std, ent editions onlyYou can purchase sql server 2012 developer edition at Amazon:
http://www.amazon.com/SQL-Server-Developer-Edition-2012/dp/B007RFXQAM/ref=sr_1_1?ie=UTF8&qid=1403791371&sr=8-1&keywords=sql+server+2012+developer+edition
It used to be around $49. Now price varies since it is out of print.
You can purchase SQL Server 2014 developer edition for $53:
http://www.amazon.com/Server-Developer-Edition-2014-English/dp/B00JKMY8KC/ref=sr_1_1?ie=UTF8&qid=1403791445&sr=8-1&keywords=sql+server+2014+developer+edition
Kalman Toth Database & OLAP Architect
SQL Server 2014 Design & Programming
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
What licenses and how many should be taken for SQL Server 2012 Standard Edition
Hi,
Could you help me please with my problem: what licenses (per core or Server + CAL) should I take for SQL Server 2012 Standard Edition for the following environment:
SQl Server will be installed on VM with 1 core.
Physical processor is Intel Xeon CPU E7-4830, 2.13 GHz, 2131 Mhz.
Few people will have an access to the VM but SQL server is used for a web-application for about 200 users from Active Directory.
Great thanks in advance,
LenaHello,
Since the question is a license issue, you can call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly
to a Microsoft licensing specialist. You can also visit the following site for more information and support on licensing issues:
http://www.microsoft.com/licensing/mla/default.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
How to download Sql Server 2012 Standard verison
We have purchased a Sql Server 2012 license. How can I download the installation media? Only download I found was the evaluation copy. Should I download this, install it and update the license?
We have purchased a Sql Server 2012 license. How can I download the installation media? Only download I found was the evaluation copy. Should I download this, install it and update the license?
You can download
SQL Server 2012 enterprise evaluation edition.
After download is finished locate setup file and right click on it and select run as administrator when you reach page where you have to select Evaluation edition or enter Key for licensed edition please enter the license key and continue with installation.
After installation completes you would get standard edition
run below to check
select @@Version
select serverproperty('productversion'),
serverproperty('edition')
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
How to download SQL Server 2012 Standard Trial Version?
Hello,
I would like to try Standard Edition of SQL Server 2012. Where I can download it?
I followed this link www.microsoft.com/en-us/sqlserver/get-sql-server/try-it.aspx and downloaded and installed. But when I check in SQL Server Management Studio (Mangement Studio->Server->Properties->Generals->Product), it shows "Microsoft
SQL Server Enterprise Evaluation (64-bit)".
As I don't need Enterprise Edition for my project, I would like to test with Standard Edition for few days before purchasing.
Please advise.
Thanks in advanced.Hello,
There is no edition specific to evaluation edition.Its same as enterprise but you can use it maximum for 6 months and you cnanot use it in production.Use below link for Eval edtn
http://www.microsoft.com/en-gb/download/details.aspx?id=29066
Now there is no standard evaluation edition.If you want to specifically test on Stand. edition you need to buy a license copy.But i guess you want to test some non enterprise features so you need to by stand for it.
Can you tell me what you want to test specifically I will tell you whether stand or ent will make any differnce or not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
SQL Server 2012 standard edition on 2 node cluster
I have an environment with three SQL instances running an application. Two of the instances are enterprise edition and one is standard. I am looking to move all instances up to SQL Server 2012 and hoping to put them on a 3 node Windows Failover Cluster.
I understand that standard edition is limited to two nodes. What I want to know is what my options are?
Can install standard edition on the cluster but only on two of the three nodes?
Do I need to create a second Windows Cluster? Is this even possible?
Regards, Matt Bowler MCITP, My BlogCan install standard edition on the cluster but only on two of the three nodes?
Yes. That's possible. SQL Setup would block you to add third node. It doesn't check how many nodes we have in windows cluster.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle -
Role based Measures in SQL Server 2012 Standard Edition
my use case: user 1 should have access only to Unit/Qty Measures and user 2 should have access to both - Qty AND $$ Amt measures. I CANT use Perspectives since im on Standard Edition.
Is there a workaround to hide a Measure based a user Role?Step1 - Create new role for User 1
Step2 - Check then enable read permission box on the Cell Data tab in the role editor
Step3 - Enter the following expression into the Allow Reading of Cube Content box
[Measures].CurrentMember IS [Measures].[Unit/Qty] -
Unable to install SQL Server 2012 Standard: Error code 0x851A0019
Hi All,
I am trying to install sql server 2012 standard edition on windows server 2008R2 but at the end of the installation it is giving me the following error message:
"The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes."
And in the log file I got the following error message:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
(I have posted part of the log file)
Need your help to resolve this issue.
Thanks,
MKNayeemHi,
Thanks for your reply.
I have already followed that article. I have changed the user to local account user, but it did not work.
Like you said the sql server is installed, but it is not starting the services. Following is the error log file message:
2015-03-16 10:12:15.27 Server Microsoft SQL Server 2012 - 11.0.2100.60 (X64)
Feb 10 2012 19:39:15
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
2015-03-16 10:12:15.27 Server (c) Microsoft Corporation.
2015-03-16 10:12:15.27 Server All rights reserved.
2015-03-16 10:12:15.29 Server Server process ID is 5724.
2015-03-16 10:12:15.29 Server System Manufacturer: 'VMware, Inc.', System Model: 'VMware Virtual Platform'.
2015-03-16 10:12:15.29 Server Authentication mode is MIXED.
2015-03-16 10:12:15.29 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\Log\ERRORLOG'.
2015-03-16 10:12:15.29 Server The service account is 'NT Service\MSSQL$BNG1SECISO'. This is an informational message; no user action is required.
2015-03-16 10:12:15.29 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\mastlog.ldf
2015-03-16 10:12:15.29 Server Command Line Startup Parameters:
-s "BNG1SECISO"
2015-03-16 10:12:15.57 Server SQL Server detected 2 sockets with 1 cores per socket and 1 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-03-16 10:12:15.57 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-03-16 10:12:15.57 Server Detected 16383 MB of RAM. This is an informational message; no user action is required.
2015-03-16 10:12:15.57 Server Using conventional memory in the memory manager.
2015-03-16 10:12:15.67 Server This instance of SQL Server last reported using a process ID of 2452 at 16-03-2015 07:03:13 (local) 16-03-2015 01:33:13 (UTC). This is an informational message only; no user action is required.
2015-03-16 10:12:15.67 Server Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2015-03-16 10:12:15.69 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-03-16 10:12:15.69 Server Software Usage Metrics is disabled.
2015-03-16 10:12:15.70 spid6s Starting up database 'master'.
2015-03-16 10:12:15.78 Server CLR version v4.0.30319 loaded.
2015-03-16 10:12:15.82 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-03-16 10:12:17.36 spid6s Error: 824, Severity: 24, State: 2.
2015-03-16 10:12:17.36 spid6s SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:377; actual 261:2228225). It occurred during a read of page (1:377) in database ID 1 at offset 0x000000002f2000 in
file 'C:\Program Files\Microsoft SQL Server\MSSQL11.BNG1SECISO\MSSQL\DATA\master.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and
must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Thanks
MKNayeem -
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Upgrade SQL Server 2008 R2 enterprise edition to SQL server 2012 slandered edition
Hi everyone,
Need help on below concern.
I have SQL Server 2008 R2 enterprise edition installed. Which contains SSAS cubes, SSIS packages and SSRS Reports.
I need to upgrade it to SQL Server 2012 Standard edition.
How can I achieve this ??
And I don't have much idea in SSIS package migrations.
Please help me to achieve this.
Thanks,
RohitHi,
Please follow side by side approach for upgrade.Get a new windows box and install SQL server 2012 on it
Move databases from SS2008 R2 to SS 2012 by backup restore mechanism.
Move
jobs and logins by Scripting out and running it on SQL SS 2012.See links as well
Please refer to
this link for SSIS package migration
For SSAS please post question in SSAS forum
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
For the captioned issue, is it possible? We have successfully created linked server between 2 MS SQL server 2008 standard edition, but failed for the standard and express edition. Is there any trick to setup? Thanks.
Hello,
SQL Server Management Studio Express Edition may not allow to create a linked server, but the workaround is to use the T-SQL. You can use sp_addlinkedserver and sp_addlinkedsrvlogin.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Maybe you are looking for
-
Missing G/L in sales order
Dear all, This error occurred when I created sales order. http://lh3.ggpht.com/_9kUvjBH2L9A/TQXMndoUBZI/AAAAAAAABNI/ncrXnKhddRA/IMG_004.jpg I already checked in VKOA but G/L accounts are already defined. I have no clue when looking in the analysis sc
-
How much data does MobileHot Spot use? Pandora?
I use mobile hotspot when i am in my room. Not much.. usually very quickly. Data? and I use Pandora while driving.. data?
-
Is it possible to identify orphans using Dreamweaver on a remote server?
I haven't used the Orphans option on Dreamweaver before. I usually create my pages, upload them, and then remove them from my local system (the website I work on is far too large to have on my local machine). The problem I've run into is there are a
-
Standalone Projector won't work on a Mac when output from Mac Flash 8 Pro
Standalone Projector won't work on a Mac when output from Mac Flash 8 Pro I'm outputting a Mac projector file that will work on my mac computer. However, when I upload it to FTP and download it my mac or another mac, it won't work! What's going on? I
-
Hi i've recently setup a RODC for a branch office without DNS server role; however now i need to add the role how should i setup the DNS so it is able to retrieve from a RWDC with AD integrated DNS. Thks for any info