Linking to a document saved in KM via Job Posting Overview in EREC 300

Hello Gurus,
An attachment was added to a requisition as a part of the normal process of creating a requisition (in EREC 300) . I would now like to access this attachment as a link from within the Job Publication / Posting Instance Overview . In order to achieve this ,I proceeded as follows:
1. I read the Document ID from the table T77RCF_DOCID for the Infotype 5134 and field name 'ATTACHMENT'.
2. Next got the attachment URL using the following code
CALL METHOD cl_hrrcf_hrkwf_storage=>get_url_for_bsp
 EXPORTING
 doc_id = l77rcf_docid-docid
 hrobject = ls_req_object
 version = lv_version
 IMPORTING
 url = attachment_url.
3. Next I added this URL as a link to my Overview Smartform.
When I now try to click on this link from within the E-Recruiting ( on the Job Publication Overview) it gives me this error:
SSF error: Decoding not possible
The URL for the link was found to be:
http://loki.shef.ac.uk:1080/sap/bc/contentserver/220?get&pVersion=0046&contRep=HR_KW_CONT&docId=464842A311AB2785E10000008FA70117&compId=Wagetype%20Reporter%20for%20Period%20010405-310306%20for%20emp-3531803.txt&accessMode=r&authId=CN%3DDR3&expiration=20070517163938&secKey=MIHxBgkqh
What is the best way of reading this custom link (which is stored in the KM)? Please note all standard links (say in the Requisition Overview Smartform and Job Posting Overview Smartform) seems to be working just fine.
Any idea would be welcome!

Hi Rajeev,
The below FM works now, actually when u execute this FM it does not give the whole complete URL , so in the debug mode of FM try to get the the whole URL link with the full 32/64 bit (guid) and then check the url in browser with http protocal , it should work.
Regards
Jignesh

Similar Messages

How to get documents saved in Icloud via my Ipad

I know this should be easy, but I can't seem to master it. I have save a document in ICloud via my computer (my computer saves it in Word). Now I want to access it from my Ipad. I have my Doucments & Data setting to "On". I have pages on my IPad. I've pulled that up and can't find the document. Where will the document be on my Ipad so I can access it?

Welcome to the Apple Community.
How did you save the document and where did you save it to on your Mac, did you save it through Pages or iCloud.com.

Hi i recently created a document on iwork pages via my icloud account however when i click on the document now it doesnt seem like it saved the latest version? can anyone help with this?

Hi i recently created a document on iwork pages via my icloud account however when i click on the document now it doesnt seem like it saved the latest version? can anyone help with this?

Welcome to the Apple Community.
Are you also trying to re-open it on the same device as you edited it.

SCCM QUERY or VB SCRIPT to find Free Diskspace/ No of documents saved/last logon details (who and when)

Can we please get a report showing all company laptops and the following information
1. Disk space in use/Free and number of files/documents saved (doesn't matter if its Word or PDF, just give me the numbers)
2. Whether they have any PST files stored on them
3. The last login details (who and when)<o:p></o:p>
I don't mind if its a VBscript or .batch file (but that should also extract the result in excel file) or i have SCCM 2012 server in place, and i can
utilize this to get the result via querying.
<o:p>I am Fairly new to SCCM2012 so please be nice if i ask any silly questions.</o:p>
Thanks in advance,<o:p></o:p>

1a: Disk space in use/Free: there are some default reports on your ConfigMgr 2012 site in the folder "Hardware - Disk"; those may be what you want.
1b: number of files/documents saved: by default out of the box (unless you've changed it), "file inventory", also known as software inventory, is not enabled. This is for various technical and practical reasons. However, if for your specific
company you are required to scan for *.doc, *.xls, *.docx, *.xlsx, *.pdf, etc--you can certainly enable that feature. Once enabled, you will be able to create custom reports to "count" the number of files on each computer.
2: similar to 1b above, you could enable scanning for files which happen to be named *.pst. This link is more advanced; but it's a more granular way of detecting who is using pst files, and where they are--whether or not they are local-->
http://www.mnscug.org/blogs/sherry-kissinger/249-pstfinder
3: "last login details who and when"--that is "sort of" recorded and available. But I want to be cautious about telling you that it's available--because really it's your Active Directory domain controllers that *really* know when
a username last logged in. Remember, ConfigMgr is NOT meant to be an up-to-the-second reporting mechanism. The reason last login details are recorded from a configMgr point of view is simply to assist in determining who the primary user of a machine
is. It's not, and is never meant to be, to help you see the exact time Bob logged into ComputerX. It's more so that over weeks, the ConfigMgr Client can determine "hey, Bob is the one with the most console minutes on ComputerX, he's probably
the primary user of ComputerX".
Standardize. Simplify. Automate.

Creating a new "Link to a Document" opens Word document or upload document dialog - plus more!

The Link to Document content type seems to be corrupted at root. When I attempt to create a new Link, either Word opens with a blank document or the "Upload" document dialog opens. It's been changing as I investigate.
One things I've noticed is that the "Link to a Document" Content Type on the parent site collection now shows it's parent as Document. this explains why the Word document opens, but not why the Upload dialog does.
While writing this question, I decided to check further and it seems that the other document types, Audio, Video etc. all now have Document as the parent and are opening a blank Word document.
Has anyone seen this behavior? How do I fix this?
This is on SharePoint 2010.
Thanks in advance.
Barry Cohen
Barry Cohen

Well, I spoke too soon. The process worked for all the custom content types, but the default Document type was still messed up. I probably should have fixed that one first, but...
Anyhow, the Document type had no template going to the Upload File dialog rather than the blank Word document it's supposed to go to. I followed the same procedure I'd followed for the other content types, checking what worked on another site and using that
template which in this case was a blank field:
So, I went opened Document, Document Content Type and went to advanced settings. The template field was empty, which matched the working site, so thinking that if I saved, it would match up with the working site. I saved the Document content type and when
after several minutes the save failed with an incredibly long list of locations where that were being perceived as "read only" plus several hidden content types that were listed as sealed. This snapshot shows a few of they many pages of content types. (I poorly
struck through confidential info):
Besides this gigantic error, which would require going to hundreds of locations on the site to change read access settings, which are, as far as I can tell actually not "read only" or are inaccessible, such as the hidden "System Page Layout' and so forth
which shouldn't be based upon the default document type anyway and therefor not fixable, I need to understand why this is happening and what to do about it. I don't want to spend the next two days going over all of these libaries and content types and ending
up back where I started with all the content types still screwed up. Afterall, I've spent about a day creating all these custom Content Types only to have the default Document content type loose its settings and corrupting everything and another day fixing
it and having it happen again.
This is a highly unacceptable behavior on the part of SharePoint and I would really like to fix this.
Help is sorely needed.
Thanks in advance
Barry Cohen

How to create a 'Link to a Document' Item in a SharePoint Document Library using power shell?

Hi,
I have a document library with "Link to a document" content type. And, I have to add some links into that library using powershell. I have searched enough regarding approachs for adding a link into the library in powershell but i did not get anything yet.
Please provide some approaches and code samples to solve this problem.
Thanks,
Lalit Kumar Mishra

Adding Site Columns To Content Types Using PowerShell
Adding Site Columns To Content Types Using PowerShell
The below PowerShell script will allow you to add a metadata field that is either contained at the Site Collection level, Site level, or library level, to the specified Content Type.
It also contains some optional lines that you might choose to include or exclude, such as
Setting the visibility of the column in the edit form to hidden
Setting the status of the column to require values
01
function Add-SPContentTypeField
02
03
 <#
04
 .Synopsis
05
 This function will allow you to add a library field to a Content
Type
06
 .Description
07
 This function will add the nominated site column/ library column to a nominated Content
Type within all of the 'Document Libraries'
in the given Site Collection
08
 .Example
09
 C:\PS>Add-SPContentTypeField
–SiteUrl “http://yourdomain.com/sites/Finance –FieldName
"myField" -CTypeAddedTo "myContentType"
10
 .Notes
11
 Name: Add-SPContentTypeField
12
 Author: Petro Margaritis
13
 Last Edit: 19/07/2012
14
 Keywords: Fields, Site Columns, Content Types
15
 .Link
16
 http://thesharepointproject.com/
17
 #>
18
19
 Param (
20
 [parameter(Mandatory=$true)][string]$SiteUrl,
21
 [parameter(Mandatory=$true)][string]$FieldName,
22
 [parameter(Mandatory=$true)][string]$CTypeAddedTo
23
24
25
 $site = Get-SPSite
$SiteUrl
26
27
 # Walk through each site in the site collection
28
 $site | Get-SPWeb
-Limit all | ForEach-Object {
29
30
 write-host
"Checking site:"$_.Title -Foregroundcolor
Green
31
32
 # Go through each document library in the site
33
 foreach
($list in $_.Lists | where
{ $_.BaseTemplate -eq "DocumentLibrary" })
34
35
36
 # Check to see if the library contains the content type we are looking for
37
 if (($list.ContentTypes |
where { $_.Name -eq $CTypeAddedTo
}) -eq $null)
38
39
 Write-Host
"The Content:" $CTypeAddedTo "does not exist in the library:"
$list.Title -Foregroundcolor Red
40
41
 else
42
43
 # Check to see if the library contains the field we are looking for
44
 if (($list.Fields |
where { $_.Title -eq $FieldName
}) -ne $null)
45
46
 # Get the content type you want to add the field to
47
 $ct
= $list.ContentTypes[$CTypeAddedTo]
48
 # Get the column you want to copy
49
 $field
= $list.Fields[$FieldName]
50
 # Add the column to the content type
51
 $ct.Fieldlinks.Add($field)
52
 $ct.update()
53
54
 # Add additional column settings
55
 $ctFieldLinks
= $ct.FieldLinks | Where
{$_.Name -eq $field.Title}
56
 # OPTIONAL: This will set the column to hidden so that it is not viewable in the edit form
57
 $ctFieldLinks.Hidden =
$true
58
 # Set Field to require value
59
 $ctFieldLinks.Required =
$true
60
 $ct.Update()
61
 Write-Host
"The Field:" $field.Title "has been successfully added to the library:"
$list.Title -Foregroundcolor Cyan
62
63
 else
64
65
 Write-Host
"The Field:" $FieldName "does not exist in the library:"
$list.Title -Foregroundcolor Yellow
66
67
68
69
70
 # Dispose of the site object
71
 $site.Dispose()
72
Simply copy and paste the above into Notepad and save it as a PowerShell file with the name
Add-SPContentTypeField.ps1
view sourceprint?
1
# To run the above function you'll need to do the following - go into the saved location
2
Cd C:\scripts\
3
# Then call it using the dot prefix - note that there is a space between the dots, ..\
4
. .\Add-SPContentTypeField.ps1
5
# Now we can happily run the script like so
6
Add-SPContentTypeField –SiteUrl “http://yourdomain.com/sites/Finance –FieldName
"myField" -CTypeAddedTo "myContentType"

Document text now linked to another document - how to remove?

I admit I am new to InDesign and am learning through the proverbial firehose. I have been selecting, copying, and pasting content from one InDesign document into my current working document. Because the new document uses different Character and Paragraph Styles from the old one, I delete the ones that get copied over from the previous document and reassign all the copied text with the current ones. Up until now, this worked without problems. The last time I did this, somehow the imported content linked my current document to the old document I copied it from. So every time I try to modify it in the new document, even the smallest thing like deleting some text, it has to go back and open the old document before it can make the change in the new one. This really slows things down to practically being unusable. How can I break this link to the old document? Thanks! Phil

Hi Peter. I think I have a better understanding of what happened, although I'm not sure why it caused a problem. The best part is, I think I've found a workaround that stops the problem from happening. I had been working with all my InDesign files on a remote network drive, but was unhappy with the file transfer speed. So I copied the whole folder, with all the Documents, Books, Links, and everything, to a local hard drive and started working on them there. I think that is when the problem started happening.
After moving the files to my local drive, the file speed still seemed slow, but I didn't realize until this morning that even when I open the Book on the local drive, it is still pointing to all the documents on the network drive. I only realized this when I looked at the Documents on my local drive, and they were still earlier versions, all the updated documents were still on the network drive. So, suspecting that the problem had something to do with confusion of file locations, I did two things. First, I copied the whole folder AGAIN from the remote drive to my local drive. Then I opened the offending Document directly (not via the Book) and deleted the last section I had copied and pasted from the old Document. This seemed to cure the problem of it always looking for the old Document it was copied from. Then I deleted the Book itself, and am in the process of reconstructing it using all the Documents on the local hard drive folder.
This raises a few questions about the best way to work.
1) Is it better to edit individual documents of a Book by opening them from within the Book, or should I edit them individually, and then update the Book when I am all done? I'm starting to think the latter would give faster response, because the Book would not always have to update all the Documents with every change you make in one of them.
2) When I'm done with the Book, I then want to move the whole package (Book, Documents, Links, Fonts, etc.) to a network drive for access by other users. Will I need to delete and rebuild the Book after I have moved it to the network drive, since otherwise it would still be pointing to the Documents on my local drive? Or is there an easier way?
Also, if you can recommend a good reference with this kind of information, it would be much appreciated. I do have InDesign CS5 Classroom in a Book, but it doesn't have this kind of information.
Phil

Custom Content type based on "Link to a Document" does not open new folder in a dialog

Hi,
We have created a custom Content Type based on "Link to a Document" (0x01010A) into a document library. When I use the New Document button on the ribbon, the "Link to a document" form appears on the same window, not as a dialog. If we
use the "link to a document" content type it works fine.
This issue occurs when creating the content type from the SharePoint UI as well as via XML (provisioning the content type).
Is it a SharePoint bug or are we missing something?
Thanks!
Sergio

Hi S3rgiones,
I can reproduce your issue, when create a custom content type based on “Link to a Document” content type, create item using the content type, it will open the NewLink.aspx page in the same window not the modal dialog.
In this situation, you can try to custom the content type and customize the form page for it, specify it in the content type customization, if this doesn’t work, you may need to custom the content type not inherit from the default link to
a document, but customize it yourself.
Thanks,
Qiao Wei
TechNet Community Support

External Link to Word document question

Hello, fellow RoboHelpers!
I have a quick question that I am hoping someone can answer
for me. :-)
I am using RoboHelp X5 and use Microsoft HTML Help (.CHM) as
my file output. I would like to link a Word document to one of my
topics, so when a user clicks the link, they will be prompted to
open/save the Word document.
The following are the steps I use to do this:
1) I type the text that I want the to use for the hyperlink,
highlight it, and select the Hyperlink tool (or press CTRL+K).
2) In the Hyperlink dialog box, I select "File" from the
"Link To:" section and select my Word document.
3) I select "Yes" to add the Word document to my project
folder.
4) In the Hyperlink diaglog box, I select OK, and the link
has been created.
5) I generate my Help project and test the link.
6) When I click the hyperlink, I receive a "File Download -
Security Warning" box asking me if I want to Open or Save the Word
document.
Problem #1 -- it appears that I can save the Word document by
clicking "Save" without any problems, but clicking "Open" does not
open the Word document in Microsoft Word. Why?
Problem #2 -- The warning box displays three criteria: the
file name, what type of file it is, and "From". I have issues with
the "From" line. While the .CHM file is attempting to call the Word
document from within the .CHM file, which is what I expected it to
do ... the path is, well, ugly looking :-P
mk:@MSITStore:C:\Program%20Files\RoboHelp%20Office\
RoboHTML\HTMLMicrosoftHTML\VRHelp.chm::/ICBA.doc
Is there any way that I can clean up this path? If I could at
least get rid of that mk:@MSITStore, that would be a good start.
If anyone has some suggestions, I am all for it!
Thank you very much,
--Jessica

quote:
Originally posted by:
johnmccallum
Jessica,
The "mk:@MSITStore:" is the protocol for extracting from a
.chm file, much like an "http:" precedes a web address. I'm afraid
that just is part of the path if the Word document is embedded in
the help file.
Ahh, I am sorry to hear that that is the case. Thanks for the
information!
quote:
Originally posted by:
johnmccallum
I don't know why your "Open" doesn't work. Does it open the
document within the browser window, or just not open it at all? Are
you adding the Word document as a baggage file? I don't know if
RHX5 does this automatically with your steps as I use an older
version.
John
Yes, the Word document is added as a baggage file. If I click
"Open", the Security Warning box disappears and nothing happens
(unfortunately).
In the Hyperlink properties, I realized that I had the link
opening in the "same window", so I changed it to display in a "New
Window". Now, when I generate/click the link, the Word document
tries to open in Internet Explorer (path and all). I get the same
message box as before asking me if I want to Open or Save the
document. Still, clicking "Open" will not open the Word document in
Microsoft Word. When I press Open, the box simply disappears and
the path remains in the Internet Explorer address bar. If I select
the path in the message bar and press Enter to bring up the
Open/Save prompt again, I can save the document ... but I cannot
Open it.
A thought just occurred to me while I was typing this: Would
the fact that I am using Microsoft Word 2007 have anything to do
with why the file will not open? I remember hearing that Office
2007 is not compatible with RoboHelpX5, so perhaps that is why the
document is not opening. Still, RoboHelpX5 doesn't seem to have a
problem saving the file to your harddrive regardless of the
filetype, and the Word document I am working with is a .doc file
anyway, compatible with Word 97-2003, not a .docx.
quote:
Originally posted by:
Peter Grainge
The opening of Word documents is described on my site under
Snippets.
I took a look at your site, which says:
Opening a Word document
From time to time people ask how to open a Word document from
the help.
COMPILED CHM HELP - Rick advises that you can use an HTML
Help Shortcut control to accomplish the goal.
You simply specify the file name where you would normally
specify the application.
I tried to create a HTML Help shortcut by doing the
following:
1. I click the Insert Navigation Control button, then HTML
Help Controls > Shortcut
2. In the Button options box, I enter a text description for
the button and click Next.
3. In the Shortcut Selection, the first prompt says, "Program
to run when shortcut is activated." I search for my Word document
from within my Project Folder, select it, and press Next.
4. I leave the Font options the way they are.
5. I click Finish, and the button is created.
When I generate the project and test the button, nothing
happens when I click it. If I do specify the application (ex.
WINWORD.EXE), Word
does open when I click the button. How can I get it to call
a specific Word document?
Thanks for your time, guys!
--Jessica

Cannot open numbers document saved on USB

cannot open numbers document saved on USB

Have you tried to locate them via Spotlight? If no success, try Easy Find. That occasionally works when Spotlight fails.
http://www.devontechnologies.com/download/products.html
Ciao.

Link to Blueprint documents

Hello all,
during the testing a lot of tester had the need to check the blueprint documents. As I know within the test (TA: STWB_WORK) it is not possible to "jump" to the blueprint documentation (TA: SOLAR01/02) of a Business Scenario, Business Process or Step.
Does anybody know how to assure a direct "jump" from a test case to the linked documentation?
Thanks in advance!

Hello Manfred,
if you "create" a Test Case within SOLAR02 with Test Case Type "Manual Test Case" or "Testdocument" and then join "link to a Solution Manager Document" within pop-up "Add Document", you should manage to link to a document (i.e. located at "Proj. Documentation") of any project (even the same you add this Test Case to). After generating Test Plan and Test Package tester will find a link within stwb_work to refer to this document.
I'm sorry to say that obviously the document only can be read (or saved as local copy) that way. I found no way until yet to edit those documents from this link "back into" Test (Case) Document as it is possible when Test Plan was generated from file-server instead from bbp-structure.
See also
regards
Andi
Andreas Küstermann
- Berater Collaboration + Processmanagement -
Cellent AG
Industries Solutions & Services
Geschäftsstelle Neu-Ulm
Edisonallee 1 - 3
89231 Neu-Ulm
Telefon 0731 / 954 487 - 55
Mobil 0174 / 922 84 45
Telefax 0731 / 954 487 99
mailto: [email protected]
http://www.cellent.de

Production Order Co01 enhancement to link the Material Documents from Mater

Hi Friends,
I have a reqirement I need to link the Material documents in the Production order, for Header material & Component material based on some condition, can any one tell which Enhancements will work for this.....
Thanks,
Ravi

Hi Ravi,
If you want to change the header field values during saving of the production order, Function Exit EXIT_SAPLCOZV_001 can be implemented of enhancement PPCO0007.
Regards,
Surender Yadav

Link Between Activity Document and Campaign

Hi,
We currently have configuration that generates activity documents from an e-mail campaign when the campaign is executed.
however I can see not link to the Campaign i.e. the Campaign ID is not stored anywhere in the activity document.
Can anyone tell me whether there is a way ofl inkin the activity document to the campaign via the camapaign ID?
Many thanks
David

Hi David,
By creating a project you have first of all to define a package and then you have to create a Workbench Order/Task (request) and a Customizing Order/Task (request). I think you have missed this step. Try to create again a new project.
After that you can create your extension.
Regards,
Roula

How to Link an Alternative Payee to a Supplier via API - R12

Hi,
I want to know how to link an alternative Payee to a Supplier via API.
Below is the business scenario which we require,
Supplier Creation:_
Vendor Name: Supplier A
Site1 : SITE 1
Site2 : SITE 2
Supplier Relationship Creation:_
Relationship is set to for 'Supplier A', SITE2 with
Remit To Supplier Name : Supplier A
Remit To Supplier Site : SITE 1
and marked as Primary.
Invoice Creation:_
Invoice Num: Tst_Inv_1
Tst_Inv_2
Tst_Inv_3
Tst_Inv_4
Scenario:_
Before creating the relationship between SITE1 & SITE2,
The payment for Invoice 'Tst_Inv_1' created under SITE 1 is made to SITE 1 as expected.
The payment for Invoice 'Tst_Inv_2' created under SITE 2 is made to SITE 2 as expected.
After creating the relationship between SITE1 & SITE2,
The payment for Invoice 'Tst_Inv_3' created under SITE 1 is made to SITE 1 as expected.
The payment for Invoice 'Tst_Inv_4' created under SITE 2 is made to SITE 1 as expected as the Remit-To Supplier name and Remit-To Supplier Site is set 'Supplier A' and SITE 1.
Is there anyway to achieve this scenario via API.
I found one API (IBY_EXT_PAYEE_RELSHIPS_PKG) which will just tell whether any relationship is existing between those two suppliers, But not to create new relationships.
Regards,
Mano Pratheep

Hi,
Creat the following internal table
DATA: i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
Pass the values to this internal table as follows
i_reclist-receiver = '<give ur mail id>'. "SAPoffice: Name of the recipient of a document (also ext.)
i_reclist-rec_type = 'U'. "Specification of recipient type
*U = INTERNET ADDRESS,
*B = SAP USER,
*P = PRIVATE DISTRIBUTION LIST,
*O = SAPOFFICE USER,
*R = SAP user in another SAP System
*X = X400 ADDRESS
*C = SHARED DISTRIBUTION LIST
APPEND i_reclist.
Pass the internal table to the Tables parameter of 'receivers'
receivers = i_reclist
Regards,
Chandu

How do i sign a document that was sent via email?

I need to sign a document that was sent via email and i dont know to much about computers so i dont know what to do or how t do it. I do know that i need to sign it There is a place for my signature. It came from another country and i am having a hard time comtacting them. I downloaded alot of the adobe products in hopes that i downloaded the right one to help whith what i need done. PLEASE HELP ME!!!!

Hello,
If you are opening the document in Adobe Reader to fill and esign, you can go through this link for help:
http://helpx.adobe.com/echosign/kb/send-via-reader.html
Let us know if you need any further help!
Regards,
-Rijul

Linking to a document saved in KM via Job Posting Overview in EREC 300

Similar Messages

Maybe you are looking for