Linux meminfo very high slab
Hi,
we face a problem with on of our linux SLES Database Server. The kernel is consuming 80% of the memory for the slab.
SLES 11.3
Linux 3.0.101-0.21-default
MemTotal:
12195516 kB
MemFree:
219028 kB
Slab:
9364632 kB
SReclaimable:
6859668 kB
Normally the SLAB is reclaimable by kernel itself or by command
#>echo 2 > /proc/sys/vm/drop_caches
But in our case the kernel do not free the space. So the databases are swapping blocks to the hard disk.
Does anyone see some behavior like this in the past ?
Does this maybe a kernel bug ?
Is it possible to limit the slab ?
Thanks a lot !!!
Re Dude,
here are the output.
#> sysctl vm.swappiness
vm.swappiness = 60
#> df /dev/shm
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 6097756 244 6097512 1% /dev/shm
#> ipcs -um
------ Shared Memory Status --------
segments allocated 9
pages allocated 415
pages resident 63
pages swapped 154
Swap performance: 0 attempts 0 successes
#> cat /proc/meminfo
MemTotal: 12195516 kB
MemFree: 614656 kB
Buffers: 1304 kB
Cached: 91512 kB
SwapCached: 207964 kB
Active: 505684 kB
Inactive: 154976 kB
Active(anon): 486100 kB
Inactive(anon): 87416 kB
Active(file): 19584 kB
Inactive(file): 67560 kB
Unevictable: 21948 kB
Mlocked: 19904 kB
SwapTotal: 2096476 kB
SwapFree: 1048424 kB
Dirty: 2836 kB
Writeback: 0 kB
AnonPages: 540516 kB
Mapped: 14804 kB
Shmem: 1208 kB
Slab: 8721500 kB
SReclaimable: 6802156 kB
SUnreclaim: 1919344 kB
KernelStack: 10464 kB
PageTables: 27392 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 8194232 kB
Committed_AS: 7583852 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 533156 kB
VmallocChunk: 34359149900 kB
HardwareCorrupted: 0 kB
AnonHugePages: 83968 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 246064 kB
DirectMap2M: 12335104 kB
Thanks for the help
Similar Messages
-
Which perspectives I should consider about Av Rd(ms) is very high just for
db version: 11.1.7
os: RH linux 5.5
I was seeing i/o stats from AWR generated for one hour, and all the value of Av Rd(ms) for files i/o stats are under around 10, however except for one file, the Av Rd(ms) just for one data file is very high(38325.25), even Av Rd(ms) of the others data files which are on same mount point with that one file are also normal, so I think this should be caused by application, however I can not find out clue.
so could you please give me some perspectives to be considered and to be researched? thanks so much!RLUO wrote:
db version: 11.1.7
os: RH linux 5.5
I was seeing i/o stats from AWR generated for one hour, and all the value of Av Rd(ms) for files i/o stats are under around 10, however except for one file, the Av Rd(ms) just for one data file is very high(38325.25), even Av Rd(ms) of the others data files which are on same mount point with that one file are also normal, so I think this should be caused by application, however I can not find out clue.
so could you please give me some perspectives to be considered and to be researched? thanks so much!Look at the v$event_histogram report for anything to to with file reads. It's possible that you will find that a single read request got an extremely high time - I've seen odd glitches occasionall, with a single block read taking (apparently) several weeks to complete - and that you can ignore the side effects .
Regards
Jonathan Lewis -
Very high resolution after update
I just finished update after 2-weeks holiday, and... X start it very high resolution: 2048x1536. I have 1024x768 in the /etc/X11/xorg.conf, log shows that this file is used. How it is possible that higher mode is initialized? I use Linux for about 10 years but it's first time I see something like this.
PS. this is probably related to xf86-video-ati update, I use Radeon 9800 Pro.does it happen in the login page? cuz i have the same problem (my monitor doesnt even show image because of the ress being so high)
but i have a x1650pro so shouldnt be a card problem.. -
Very high cpu utilization with mq broker
Hi all,
I see a very high cpu utilization (400% on 8 cpu server) when I connect consumers to OpenQ. It increase close to 100% for every consumer I add. Slowly, the consumer comes to a halt, as the producers are sending messages at a good rate too.
Environment Setup
Glassfish version 2.1
com.sun.messaging.jmq Version Information Product Compatibility Version: 4.3 Protocol Version: 4.3 Target JMS API Version: 1.1
Cluster set up using persistent storage. snippet from broker log.
Java Runtime: 1.6.0_14 Sun Microsystems Inc. /home/user/foundation/jdk-1.6/jre [06/Apr/2011:12:48:44 EDT] IMQ_HOME=/home/user/foundation/sges/imq [06/Apr/2011:12:48:44 EDT] IMQ_VARHOME=/home/user/foundation/installation/node-agent-server1/server1/imq [06/Apr/2011:12:48:44 EDT] Linux 2.6.18-164.10.1.el5xen i386 server1 (8 cpu) user [06/Apr/2011:12:48:44 EDT] Java Heap Size: max=394432k, current=193920k [06/Apr/2011:12:48:44 EDT] Arguments: -javahome /home/user/foundation/jdk-1.6 -Dimq.autocreate.queue=false -Dimq.autocreate.topic=false -Dimq.cluster.masterbroker=mq://server1:37676/ -Dimq.cluster.brokerlist=mq://server1:37676/,mq://server2:37676/ -Dimq.cluster.nowaitForMasterBroker=true -varhome /home/user/foundation/installation/node-agent-server1/server1/imq -startRmiRegistry -rmiRegistryPort 37776 -Dimq.imqcmd.user=admin -passfile /tmp/asmq5711749746025968663.tmp -save -name clusterservercom -port 37676 -bgnd -silent [06/Apr/2011:12:48:44 EDT] [B1004]: Starting the portmapper service using tcp [ 37676, 50, * ] with min threads 1 and max threads of 1 [06/Apr/2011:12:48:45 EDT] [B1060]: Loading persistent data...
I followed step in http://middlewaremagic.com/weblogic/?p=4884 to narrow it down to Threads that was causing high cpu. Both were around 94%.
Following is the stack for those threads.
"Thread-jms[224]" prio=10 tid=0xd635f400 nid=0x5665 runnable [0xd18fe000] java.lang.Thread.State: RUNNABLE at com.sun.messaging.jmq.jmsserver.data.TransactionList.isConsumedInTransaction(TransactionList.java:697) at com.sun.messaging.jmq.jmsserver.core.Session.detatchConsumer(Session.java:918) - locked <0xf3d35730> (a java.util.Collections$SynchronizedMap) at com.sun.messaging.jmq.jmsserver.core.Session.detatchConsumer(Session.java:810) at com.sun.messaging.jmq.jmsserver.data.handlers.ConsumerHandler.destroyConsumer(ConsumerHandler.java:577) at com.sun.messaging.jmq.jmsserver.data.handlers.ConsumerHandler.handle(ConsumerHandler.java:422) at com.sun.messaging.jmq.jmsserver.data.PacketRouter.handleMessage(PacketRouter.java:181) at com.sun.messaging.jmq.jmsserver.service.imq.IMQIPConnection.readData(IMQIPConnection.java:1489) at com.sun.messaging.jmq.jmsserver.service.imq.IMQIPConnection.process(IMQIPConnection.java:644) at com.sun.messaging.jmq.jmsserver.service.imq.OperationRunnable.process(OperationRunnable.java:170) at com.sun.messaging.jmq.jmsserver.util.pool.BasicRunnable.run(BasicRunnable.java:493) at java.lang.Thread.run(Thread.java:619) Locked ownable synchronizers: - None
"Thread-jms[214]" prio=10 tid=0xd56c8000 nid=0x566c waiting for monitor entry [0xd2838000] java.lang.Thread.State: BLOCKED (on object monitor) at com.sun.messaging.jmq.jmsserver.data.TransactionInformation.isConsumedMessage(TransactionList.java:2544) - locked <0xdbeeb538> (a com.sun.messaging.jmq.jmsserver.data.TransactionInformation) at com.sun.messaging.jmq.jmsserver.data.TransactionList.isConsumedInTransaction(TransactionList.java:697) at com.sun.messaging.jmq.jmsserver.core.Session.detatchConsumer(Session.java:918) - locked <0xe4c9abf0> (a java.util.Collections$SynchronizedMap) at com.sun.messaging.jmq.jmsserver.core.Session.detatchConsumer(Session.java:810) at com.sun.messaging.jmq.jmsserver.data.handlers.ConsumerHandler.destroyConsumer(ConsumerHandler.java:577) at com.sun.messaging.jmq.jmsserver.data.handlers.ConsumerHandler.handle(ConsumerHandler.java:422) at com.sun.messaging.jmq.jmsserver.data.PacketRouter.handleMessage(PacketRouter.java:181) at com.sun.messaging.jmq.jmsserver.service.imq.IMQIPConnection.readData(IMQIPConnection.java:1489) at com.sun.messaging.jmq.jmsserver.service.imq.IMQIPConnection.process(IMQIPConnection.java:644) at com.sun.messaging.jmq.jmsserver.service.imq.OperationRunnable.process(OperationRunnable.java:170) at com.sun.messaging.jmq.jmsserver.util.pool.BasicRunnable.run(BasicRunnable.java:493) at java.lang.Thread.run(Thread.java:619) Locked ownable synchronizers: - None
"Thread-jms[213]" prio=10 tid=0xd65be800 nid=0x5670 runnable [0xd1a28000] java.lang.Thread.State: RUNNABLE at com.sun.messaging.jmq.jmsserver.data.TransactionList.isConsumedInTransaction(TransactionList.java:697) at com.sun.messaging.jmq.jmsserver.core.Session.detatchConsumer(Session.java:918) - locked <0xe4c4bad8> (a java.util.Collections$SynchronizedMap) at com.sun.messaging.jmq.jmsserver.core.Session.detatchConsumer(Session.java:810) at com.sun.messaging.jmq.jmsserver.data.handlers.ConsumerHandler.destroyConsumer(ConsumerHandler.java:577) at com.sun.messaging.jmq.jmsserver.data.handlers.ConsumerHandler.handle(ConsumerHandler.java:422) at com.sun.messaging.jmq.jmsserver.data.PacketRouter.handleMessage(PacketRouter.java:181) at com.sun.messaging.jmq.jmsserver.service.imq.IMQIPConnection.readData(IMQIPConnection.java:1489) at com.sun.messaging.jmq.jmsserver.service.imq.IMQIPConnection.process(IMQIPConnection.java:644) at com.sun.messaging.jmq.jmsserver.service.imq.OperationRunnable.process(OperationRunnable.java:170) at com.sun.messaging.jmq.jmsserver.util.pool.BasicRunnable.run(BasicRunnable.java:493) at java.lang.Thread.run(Thread.java:619) Locked ownable synchronizers: - None
Any ideas will be appreciated.
--Thanks ak, for the response.
Yes, the messages are consumed in transactions. I set imq.txn.reapLimit=200 in Start Arguments in jvm configuration.
I verified that it is being set in the log.txt file for the broker:
-Dimq.autocreate.queue=false -Dimq.autocreate.topic=false -Dimq.txn.reapLimit=250
It did not make any difference. Do I need to set this property somewhere else ?
As far as upgrading MQ is concerned, I am using glassfish 2.1. And I think MQ 4.3 is packaged with it. Can you suggest a safe way to upgrade to OpenMQ 4.5 in a running environment. I can bring down the cluster temporarily. Can I just change the jar file somwhere to use MQ4.5 ?
Here is the snippet of the consumer code :
I create Connection in @postConstruct and close it in @preDestroy, so that I don't have to do it everytime.
private ResultMessage[] doRetrieve(String username, String password, String jndiDestination, String filter, int maxMessages, long timeout, RetrieveType type)
throws InvalidCredentialsException, InvalidFilterException, ConsumerException {
// Resources
Session session = null;
try {
if (log.isTraceEnabled()) log.trace("Creating transacted session with JMS broker.");
session = connection.createSession(true, Session.SESSION_TRANSACTED);
// Locate bound destination and create consumer
if (log.isTraceEnabled()) log.trace("Searching for named destination: " + jndiDestination);
Destination destination = (Destination) ic.lookup(jndiDestination);
if (log.isTraceEnabled()) log.trace("Creating consumer for named destination " + jndiDestination);
MessageConsumer consumer = (filter == null || filter.trim().length() == 0) ? session.createConsumer(destination) : session.createConsumer(destination, filter);
if (log.isTraceEnabled()) log.trace("Starting JMS connection.");
connection.start();
// Consume messages
if (log.isDebugEnabled()) log.trace("Creating retrieval containers.");
List<ResultMessage> processedMessages = new ArrayList<ResultMessage>(maxMessages);
BytesMessage jmsMessage = null;
for (int i = 0 ; i < maxMessages ; i++) {
// Attempt message retrieve
if (log.isTraceEnabled()) log.trace("Attempting retrieval: " + i);
switch (type) {
case BLOCKING :
jmsMessage = (BytesMessage) consumer.receive();
break;
case IMMEDIATE :
jmsMessage = (BytesMessage) consumer.receiveNoWait();
break;
case TIMED :
jmsMessage = (BytesMessage) consumer.receive(timeout);
break;
// Process retrieved message
if (jmsMessage != null) {
if (log.isTraceEnabled()) log.trace("Message retrieved\n" + jmsMessage);
// Extract message
if (log.isTraceEnabled()) log.trace("Extracting result message container from JMS message.");
byte[] extracted = new byte[(int) jmsMessage.getBodyLength()];
jmsMessage.readBytes(extracted);
// Decompress message
if (jmsMessage.propertyExists(COMPRESSED_HEADER) && jmsMessage.getBooleanProperty(COMPRESSED_HEADER)) {
if (log.isTraceEnabled()) log.trace("Decompressing message.");
extracted = decompress(extracted);
// Done processing message
if (log.isTraceEnabled()) log.trace("Message added to retrieval container.");
String signature = jmsMessage.getStringProperty(DIGITAL_SIGNATURE);
processedMessages.add(new ResultMessage(extracted, signature));
} else
if (log.isTraceEnabled()) log.trace("No message was available.");
// Package return container
if (log.isTraceEnabled()) log.trace("Packing retrieved messages to return.");
ResultMessage[] collectorMessages = new ResultMessage[processedMessages.size()];
for (int i = 0 ; i < collectorMessages.length ; i++)
collectorMessages[i] = processedMessages.get(i);
if (log.isTraceEnabled()) log.trace("Returning " + collectorMessages.length + " messages.");
return collectorMessages;
} catch (NamingException ex) {
sessionContext.setRollbackOnly();
log.error("Unable to locate named queue: " + jndiDestination, ex);
throw new ConsumerException("Unable to locate named queue: " + jndiDestination, ex);
} catch (InvalidSelectorException ex) {
sessionContext.setRollbackOnly();
log.error("Invalid filter: " + filter, ex);
throw new InvalidFilterException("Invalid filter: " + filter, ex);
} catch (IOException ex) {
sessionContext.setRollbackOnly();
log.error("Message decompression failed.", ex);
throw new ConsumerException("Message decompression failed.", ex);
} catch (GeneralSecurityException ex) {
sessionContext.setRollbackOnly();
log.error("Message decryption failed.", ex);
throw new ConsumerException("Message decryption failed.", ex);
} catch (JMSException ex) {
sessionContext.setRollbackOnly();
log.error("Unable to consumer messages.", ex);
throw new ConsumerException("Unable to consume messages.", ex);
} catch (Throwable ex) {
sessionContext.setRollbackOnly();
log.error("Unexpected error.", ex);
throw new ConsumerException("Unexpected error.", ex);
} finally {
try {
if (session != null) session.close();
} catch (JMSException ex) {
log.error("Unexpected error.", ex);
Thanks for your help.
Edited by: vineet on Apr 7, 2011 10:06 AM -
Very high memory usage with Yahoo Mail
After using Yahoo Mail for an hour or so my memory usage increases to a very high level.
Just now, after reading and deleting about 50 e-mails (newsletters etc.) I noticed Firefox 17 running slowly and checked the memory usage in Windows Task Manager (I am using XP) and it was 1.2 Gb. My older laptop only has 2 Gb of RAM. Yahoo Mail was the only thing open at the time.
I never notice this problem with Gmail which I mainly use. However I use Yahoo Mail for quite a few newsletters etc. that are less important and which I only check once a week or so.
I found the following bug report about 3 years old which almost exactly describes my problem.
https://bugzilla.mozilla.org/show_bug.cgi?id=506771
But this report involves a much earlier Firefox version, and at the end it seems to say that the problem was fixed. However it well describes my current issue with Firefox 17, especially the continual increase in memory while using the up/down arrow keys to scroll through Yahoo e-mails.
Is this normal to have to shut down and reopen Firefox every hour or so to clean out the memory? For some reason I only notice this when using Yahoo Mail. After using many other sites and having multiple tabs open for several hours I rarely reach that kind of memory usage. About the highest I've seen with other sites after a couple of hours is 600 Kb which is roughly when I start notice slower response times.See also:
*https://support.mozilla.org/kb/firefox-uses-too-much-memory-ram
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Very High messages not forwarded to SAP out of the Business Hours
Dear Gurus,
I work for a SAP partner and we have the Solution Manager 7.0 + EHP1, SP stack 24, running under a Windows Server Machine with MS Sqlserver Data Base and we're facing the following problem:
In between the business hours we are able to forward messages to SAP manually, however, after the business hours, messages set as 'very high' priority aren't being forwarded automatically to SAP.
We have already triple checked the configs listed on the SAP Notes 1084744, as well ran the Z-Report included in the note 1225682, however no success at all.
Would you kindly please shed a light on this matter?
Thank you in advance.
Everton.Hello Everton,
If you are a var Customer using the transaction type ZLFN and action profile ZSLFN0001_ADVANCED, the action profile should be AI_SDK_STANDARD.
I don't now if that is the case.
If your issue persists, please trigger a message in SV-SMG-SUP.
Best regards,
Guilherme -
Over the last few months my Mac has developed a worrying habit.
Within the first few minutes of starting it up (perhaps on average about 50% of the time) it will completely lock up. This may happen at the Log In screen (if I start up the Mac & then leave it for a while) or during normal use.
Often the first symptom is a very high pitched (but quiet) whining noise that seems to come from the loud speaker on the front of the Mac. The pointer may freeze at this point, or it may still be moveable for 5 or 10 seconds before it freezes. It sometimes turns into the spinning beach ball during this. Once locked up the only way I can restart the Mac is to hold down the power button on the front for a few seconds to completely reboot the machine.
Once the Mac has restarted, it usually behaves normally, almost always for the rest of the day. The initial lock up & resulting restart only normally seem to happen the first time I use the Mac that day.
The only peripherals attached to the Mac (apart from the display, keyboard & mouse) are an ADSL modem, a USB printer and a pair of Apple Pro speakers, and this setup hasn't changed since long before the problems started, so I'm confident that I can discount the peripherals causing problems. I doubt that unplugging the speakers, for example, would have any effect.
I've run Disc Utility, OnyX and DiscWarrior without anything major cropping up. My instincts (I've been troubleshooting Mac problems for 16 years) tell me that I have a fundamental hardware problem, possibly with one of the 4 RAM DIMMs installed.
The RAM configuration is shown in the attached screen grab.
I'm considering removing one DIMM, running with 1.5GB of RAM rather than 2GB for a while, and repeating with a different DIMM removed each time until I can hopefully isolate the dodgy DIMM.
Do people feel this is a sensible approach, or should I try something else first?
Many thanks.Sometimes visual inpection will show bulging tops/sides., my guess is if it is it's most likely in the PSU.
Possible cheap fix, You can convert an ATX PSU for use on a G4...
http://atxg4.com/mdd.html
http://atxg4.com/ -
I have just bought a hdmi tv and would like to view very high quality images, using apple tv, stored on my external hard drive. I also have blue ray movies stored on my external hd. will i be able to stream these to my tv and view them in 1080p?
sorry, why isn't correct?
i try convert video with quick time to apple tv, import in itunes( that's ok) but is impossible to synchronize my apple tv ( unsupported file).
where I wrong?
please could you explain me the correct procedure?
i have some video ( holiday movie an photo movie in mpeg2 full HD) to convert for apple tv, and from 2 years some video editing with imovie.
normally I prepare my video with Imovie, create a file .mov full hd (like master) and with roxio convert file for apple TV.
apple world is new for me, after 25 years with microsoft!
thank so much
mauro -
iPhone 4 OS 7.1.2 (11D257) display normal when switching on, turns to very high contrast with bright primary colours only, no tonal graduation.Initially problem arose every time I switched the Camera on, but has worsened such that any application can cause it. In Camera, after a short time screen goes black. Also, Wifi no longer works.
You're welcome
In case you don't want to buy a new iPhone, Apple will replace the whole unit if you are willing to pay the service fee of 149$ for the iPhone4.
Out-of-warranty repair service
If your repair isn’t covered by Apple’s One Year Limited Warranty, AppleCare+, or AppleCare Protection Plan, your iPhone might be eligible for out-of-warranty service. For example, liquid damage isn’t covered by warranty but might be eligible for out-of-warranty service. Some damage isn’t eligible at all, for example if your device has been broken into multiple pieces. See Apple’s Repair Terms and Conditions for complete details.
Read Apple’s Repair Terms and Conditions
Model
Out-of-warranty service fee
Battery service*
iPhone 6 Plus
$329
$79
*available only if battery
fails Apple’s diagnostic test
iPhone 6
$299
iPhone 5s, iPhone 5c, iPhone 5
$269
iPhone 4s
$199
iPhone 4, iPhone 3GS, iPhone 3G,
Original iPhone
$149
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing and may be less than the service fee listed above. Pricing and terms vary for service through an Apple Authorized Service Provider.
copied from Service Answer Center - iPhone -
G5 Dual 2.5GHz freezes with a very high pitch sound
Hi
My G5 Dual 2.5GHz freezes with a very high pitch sound from inside the comp. It happens occasionally after a few days of everything running smoothly. Someone can help ?
PowerMac G5 Dual 2.5 GHz Mac OS X (10.4.9)Hi Phil Brayshaw-
What does the little white power light do? This should be helpful: About the Power Mac G5 (Late 2005) diagnostic LEDs
Although it sounds to me like you have tried most of the troubleshooting steps, this document is a good overall reference to address this particular problem: Power Mac G5: What to do if you see black, white, or no video at start up
Have you tried another monitor and/or double-checked your cable and its connections? If everything else is working as expected that would certainly be a major suspect.
Luck-
-DP -
firefox is working my system too hard and the system is revving very high.
== This happened ==
Every time Firefox opened
== today ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7Does this start right when you start firefox or after you've loaded some pages? Are there specific pages that cause this problem?
-
Final Cut Pro X 's process is very high.
Final Cut Pro X process is very high and its use higest memory..what can i do to decress and how to incress speed?
when i use Final Cut Pro X then my MacBook Pro working very slow.I'm taing pics now...for some reason I have version 10.1?? My memory is good, but I recall there being not a 1 there...
-
I have an imac 27 inch O SX 10.6.8. using iphoto 11 Version 9.1.5. I have scanned some photos at very high resolution with each photo being about 45MB. They're saved to desktop. How can I reduce the size of the scanned photo's they are crashing iphoto.
What format are they? Tiif? Jpeg? You can compress them with a lot of apps - including Preivew and just about any graphics editor out there. I'm not sure that 45mb would crash iPhoto thogh, are yo sure that's the cause? I know that some folks have mentioned pixel dimensions causing issues, as can color profiles.
Regards
TD -
Rendering very high-resolution image sequence
I'm in the process of rendering a very high-resolution image sequence (8k, 2:1 aspect ratio). Yes, in this case it really is necessary to render such a large image.
Not entirely surprisingly, I'm getting an error during rendering. "Unable to allocate space for an 8000x4000 pixel image buffer."
I have a relatively powerful machine (Mac Pro, 8 cores, 16gb ram, plenty of hard drive space)
How should I tune the memory settings for this process? Also, are there any "under the hood" tweaks that I can make in AE to optimize it for rendering these large files.
Thanks!We get questions like this often around here and I, too, will be interested by the destination for this rendering.
Such a mosaic cannot be displayed from a single device so it's not necessary at all to render it as a complete frame. If you are going to a digital signage system, there are workarounds for importing the source video that should be provided by the signage driver's mfr. If you're going out to several synced display systems, render them as individual movies.
bogiesan -
I am receiving bills from my carrier with very high data usage. I read books from apple store. Do ibooks use gb once purchased?
To reduce data usage, you should put iPad on Aeroplane Mode to stop all background activities when not using iPad.
Message was edited by: Diavonex
Maybe you are looking for
-
Hi Guys, I have have this horror issue with my PC. I have even changed the hardware configuration and the problem still persists. My PC fails to display the desktop correctly after using highly RAM intensive applications, especially Chrome, but even
-
Runtime error...plz help me .ful amrks wud be given
Hi gurus.. m running a user defined transaction ZV48cji which includes all standard Programs..it gives short dump after running it..the description is as follows. An exception occurred that is explained in detail below. The exception, which is assign
-
Apex_util.set_session_state issue
Hi In order to try and workaround the issue reported in Translate substitutions I have been trying to set application item values using apex_util.set_session_state but this doesn't appear to be working. The problem in the thread was that when the adm
-
PCUI Howto Jump from Accounts app to Activities app and pass Ship-To-Party
Hi, In the Account Management screen (Application CRMM_ACCOUNT) I created a button in the Toolbar Group ACC_OIC01. Im using the existing event FUP_ACTIVITY This button should take you to the Activities application and populate the Ship-
-
Satellite A500 BIOS 1.70 (PSAM3E) Download link not working
The link: http://support1.toshiba-tro.de/tedd-files2/0/bios-20100413111848.zip Type: A500