Lion Woes with TimeMachine

Despite installing LION twice to try to eliminate several problems, TimeMachine doesn't work with internal drive on my tower.
TimeMachine starts OK but fails after a while with error msg. " Unable to write to disc, maybe a temporary problem try again later "
I've tried deleting com.apple.timemachine.plist & lockfile same message...
Does anyone have any clues ?
thanks

I recently needed to restore an older version (by a few hours) of my AddressBook DB (on Lion Client) and Time Machine simply kept crashing! Finally, what I had to do to get it going was to quit AddressBook, delete the contents of ~/Library/Application Support/AddressBook, and then open that folder within Time Machine (via Finder), so as to only restore (an older version of) the "MetaData" folder within (and nothing else).
Hope this helps.

Similar Messages

Restore a user's Address Book on Lion Server with TimeMachine available

Has anybody found the solution to restore a single user's Address Book on Lion Server with TimeMachine available

I recently needed to restore an older version (by a few hours) of my AddressBook DB (on Lion Client) and Time Machine simply kept crashing! Finally, what I had to do to get it going was to quit AddressBook, delete the contents of ~/Library/Application Support/AddressBook, and then open that folder within Time Machine (via Finder), so as to only restore (an older version of) the "MetaData" folder within (and nothing else).
Hope this helps.

My (Snowleopard) MBP died, but I had it backed up externally with TimeMachine. I bought an Air and used Migration Assistant which worked to bring the data over. However, I've now got two versions of "me" on Air - I only want one with all my info. Help!

I know it's generally recommended (if you're going to bring data from one machine to another) to update the OS on the source computer before transfer. However, my MBP died unexpectedly and my information was backed up with TimeMachine in SnowLeopard. The Air I bought as a replacement runs Lion.
I was able to use Migation Assistant to bring my info/programs/etc over...but I've now got the user set up initially (in store) with Lion when I made the purchase - and I now have a second "persona" that contains all of my backed up information from the time capsule.
Given that the Airs have (relatively speaking) smaller amounts of memory, and that I dont' want to be bouncing back and fourth between profiles, I'm wondering if it's safe to delete the "new user profile" (ie the one set up via Lion while in store) and just use and keep the "me" I brought in from the time capsule.
I've never updated a MacOS before - let alone under these circumstances, so I've got a fair amount of trepidation around the whole process.
What is the best way to wind up with one user profile, keeping all the information from my old machine and deleting anything superfluous as part of a secondary profile?
Thanks in advance for any input you can provide surrounding this process!

Thank you!
I can't tell you how terrified I was when deleting the superfluous account...but it went just swimmingly!

I have a new macbook. How do I transfer all my files from the imac to the Macbook with timemachine?

I have a new macbook. How do I transfer all my files from the imac to the Macbook with timemachine?

The OS X Mountain Lion Up-to-Date Program

Lion Server and TimeMachine Error 13

Hello,
I have a problem with a Lion Server and TimeMachine service. I have enabled the service and selected a volume for it. The server creates the share and does not report aby errors. If I go to a client machine and open TM I can see the "Backups" share and select it. The users credentials are validated witout a problem but when the backup is started it will end with the error "Cannot create sparseimage error 13"
I have checked that the share is visible to the client machine and the client has write permissions for the share.
Any ideas why this is happening?
MM

Hello,
I have a problem with a Lion Server and TimeMachine service. I have enabled the service and selected a volume for it. The server creates the share and does not report aby errors. If I go to a client machine and open TM I can see the "Backups" share and select it. The users credentials are validated witout a problem but when the backup is started it will end with the error "Cannot create sparseimage error 13"
I have checked that the share is visible to the client machine and the client has write permissions for the share.
Any ideas why this is happening?
MM

OSX Lion Server/Clients TimeMachine Location

Dear Community,
I have a problem with Timemachine for OSX Lion Server on a MacMini and hope you can help me out. I have an attached TB drive (Pegasus R6, RAID5) and set up TM sharing for the clients of my small workgroup to this drive. The Backup folder location on the server is /Volumes/Backup-Volume/Shared\ Items/Backups. Everything fine so far, clients can backup into that folder with TM sparsebundles.
My Problem is that when switching "on" TM Backup for the Server itself, I am able to choose the Volume "Backup-Volume", but it backs up to /Volumes/Backup-Volume/Backups.backupdb as a folder, not a sparsebundle.
Don't beat me, I know this is just a cosmetic issue, but why ain't it possible to store them in the same folder, with an equivalent type of structure (sparsebundle/folder). I like to have my system clean and don't like to search on different locations for my backups.
Does anybody know a workaround to manually set the location for Backups, either for clients or server. I don't care which folder it actually is, /Volumes/Backup-Volume/Shared\ Items/Backups/xxx.sparsebundle or /Volumes/Backup-Volume/Backups.backupdb/..., both are fine but it should be consistent.
A different question in this context: If this works out, I will set the HDDs the following way:
Pegasus:
2*2TB RAID 0 as Share Point "Data-Volume" for fast access, backuped
4*2TB RAID 5 as Share Point "Backup-Volume" as the name indicates for backups :-)
Mac Mini:
1*500 GB for OS, backuped
1*500 GB as Share Point "Scratch-Volume" not backuped
Any objections regarding this setup?
Thanks, Alex

When you say 'manage', what do you mean?
If you're talking directory services where you're just sorting account credentials that clients use to authenticate, then... oh several thousand... or tens of thousands, because the server is only involved when a user logs in - it validates the user's credentials and passes back details about the user's account.
However, if the user's home directories are also on the server (so the client mounts the user's home directory when they log in) well now you have a file sharing component, and network bandwidth requirements when the user logs in, etc.
Assuming you have 100 active users and a perfect gigabit network (which never, ever happens) then each user is going to get an average of 10mpbs to the server (and to their home directory, for opening/saving files, etc.). Double that to 200 users and you're down to 5mbps each. Consider that most networks never work at more than about 50% efficiency (due to protocol overheads, etc.) and you're down to 2-3mpbs each. That could be an issue.
Of course, if you have 200 users in your directory, but there's only ever 10 or 20 people active at a time those numbers change, but the point is there IS no hard number as to how many clients you can support - it's dependent on multiple factors, and way more than you've listed here.
None of that is directly relevant to whether you need a second machine or not. I'd argue that with 80 users you absolutely need another machine, if only for redundancy's sake if not load. Consider the business impact f that server is offline for any reason and you don't have a spare server to carry the load.

After upgrading to Mavericks, I am having trouble with TimeMachine backups.

After upgrading to Mavericks, I am having trouble with TimeMachine backups. As the backups get close to completion, it suddenly increasing the amount of data being backed up. My 400GB data takes up about 700GB on the backup drive.
Tried reformatting the backup disk and had the same result.

After upgrading to Mavericks, I am having trouble with TimeMachine backups. As the backups get close to completion, it suddenly increasing the amount of data being backed up. My 400GB data takes up about 700GB on the backup drive.
Tried reformatting the backup disk and had the same result.

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8)

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now. Mail will no longer download on the MacBook Pro and keeps asking for my password.

Mail should still be usable with your machine - but you'll need to update the settings to conform to the requirements of your system. Check with your ISP (like ATT, etc.) for the settings that will work with your Mail. Once you've updated this, you should be able to email like before.
For example, my ISP required that I go to Mail Preferences/Accounts and make sure the details conform to your email settings.
I have no idea of what your ISP is or what the settings might be, but this is likely the source of the problem.

Macpro dual core xeon. Why can I not download Lion even with snow leopard 10.6.8 already as sysyem?

macpro dual core xeon January 2008 Why can I not download Lion even with snow leopard 10.6.8 already as sysyem?

If you need to purchase Lion call 1-800-692-7753 or 1-800-676-2775. Ask for a Sales Representative. They will check your Apple ID, and email you a code and instructions. The cost is $29.99 (as it was before) plus tax. It's a download.

Screen sharing to OS X Lion Server with non-admin account

I have set up a Lion Server with one admin (in addition to the root user) and several non-admin normal accounts. In Server.app, I have enabled remote login with ssh, and remote management via screen sharing. I am unable to use Screen Sharing to connect to the server from the non-admin accounts, but able to use the admin account. I've read that it is only enabled for admin users, but need to access from non-admin accounts, and I can't add these accounts to the admin group. Is there a way to do this with Workgroup Manager? I tried changing the Remote Management settings in System Preferences by adding the non-admin, but when selecting 'Observe' and 'Control' in the options for the user, they are not saved.

I resolved this issue by deselecting the "Enable screen sharing and remote management" in Server.app and going to System Preferences, Sharing Preferences, Screen Sharing, and allowing access for "All Users". If you have some users you want to allow VNC, you can create a group, add the allowed users to the group, and add the group under "Only these users".

I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

I would use Parallels or VMWare and use the second drive to hold the virtual machine. That way the VM only uses the space that it needs and you can still use the remainder of the drive for other things, not to mention that you would not need to reboot to run windows.
Also Time Machine does not back up a boot camp partition.

HT201364 I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either

I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either - can anyone help please?

Download the iPhoto upgrade from the App Store. It should be free.
iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

Is Mt. Lion compatible with Final Cut Pro 7?

I am currently running Lion (10.7.5) on a 27" iMac 3.4 Ghz.
Is Mt. Lion compatible with Final Cut Pro 7 and FCS 3? Will these programs still run or will they be not supported by the new OS as has been the case with past apps when a new OS is introduced?
Thanks,
Phil

I have a 2gig HD for backing up my system HD . The backup HD is partitioned into 20 - 1 gig partitions. I use the Carbon Copy Cloner app to make a clone copy of the system HD. Never had a problem. If I need to I can boot from one of the clone partition or copy file from.
(Just make sure your FPC media and video files are on a external HD (firewire for example) other than a USB 2 HD. FCP does't work properly with USB 2 drives.)

I'm having trouble with my iMessages registration. Has anyone had any problems after they downloaded the mountain lion King with that iMessages because mine is not linking to the computer and my phone

Is anyone else having trouble after thy downloaded Mountain lion x with iMessages mine isnt linking to my computer because it keeps saying i have a registration error. Has anyone else had this problem or know how to fix it

HI,
People who have had computer that has had the Logic/motherboard replaced during repair or refurbishment that has not has the Mac Serial Number Flashed to the board have found that iMessage in particular have not been able to "register".
A current purchase of Mountain Lion will tend to give you the latest version which as of Thursday (12 th Mar) is OS X 10.8.3
You can use System Information to find if the Serial Number is there as it appears under the Hardware section.
If it is missing you need to get to an Apple Store or Apple Authorised Service Provider who can flash the info to the board.
10:46 PM Saturday; March 16, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Is lion compatible with CS4 and C1Pro

Just wondering if Lion compatible with Photoshop CS4 and Capture 1 pro 6.2.x?

all Adobe products have more or less issues in Lion. The only one 99% compatible is CS5.x, the latest.
Everything before CS3 will not even run, because it is PowerPC and Lion does not run PPC apps anymore. CS3 and above are Intel compatible. CS5 introduced first 64bit support on Intels ( Lion is fully 64bit )
Adobe has a Website with issues on Lion : http://kb2.adobe.com/cps/905/cpsid_90508.html
Your other product I do not know, sorry.

Lion Woes with TimeMachine

Similar Messages

Maybe you are looking for