List of tables in ECC 6.0

Can anyone guide me for the procedure to extract the list of all tables (PP,MM,FICO &SD) from ECC 6.0 to excel or provide the link for the same.
Thanks
Edited by: sapsarang on Jun 24, 2009 12:33 PM

Hi,
You can use table DD02VV, in this table all the table names are stored.
Regards,
prabu

Similar Messages

Find SAP table records given a list of tables

Dear all,
I have been given a list of table names that I require to provide a report a total record counts for these table.
given such codes I have can't proceed further as the field symbol that I use is invalid. Please advice how to complete this. Or perhaps any standard system reports to find the total record counts given a specified tables.
here's the code:
types : begin of w_dd02l,
           TABNAME type TABNAME,
           totalrec like sy-dbcnt,
        END OF w_dd02l.
data : wa_dd02l type STANDARD TABLE OF w_dd02l with HEADER LINE.
data : wr_dd02l type w_dd02l.
data : totalrecord like sy-dbcnt.
field-SYMBOLS : <f1> type ANY.
p_tab is a selection field.
select tabname from dd02l into CORRESPONDING FIELDS OF TABLE wa_dd02l where tabname in p_tab.
loop at wa_dd02l into wr_dd02l.
   assign wr_dd02l-tabname to <f1>.
   select count(*) from <f1> into totalrecord.
   wr_dd02l-totalrec = totalrecord.
write : wr_dd02l-tabname, wr_dd02l-totalrec.
ENDLOOP.
<f1> being a field symbol is not recognize as in ABAP dictionary. Here's where I can't proceed.. dear gurus please help.
Thanks and Regards,
Andrew

Pl. check, it's working
types : begin of w_dd02l,
          TABNAME type TABNAME,
          totalrec like sy-dbcnt,
        END OF w_dd02l.
data : wa_dd02l type STANDARD TABLE OF w_dd02l with HEADER LINE.
data : wr_dd02l type w_dd02l.
data : totalrecord like sy-dbcnt.
field-SYMBOLS : <f1> type ANY.
PARAMETERS: p_tab like dd02l-tabname.
* p_tab is a selection field.
select tabname from dd02l
               into CORRESPONDING FIELDS OF TABLE wa_dd02l
              where tabname = p_tab.
loop at wa_dd02l into wr_dd02l.
assign wr_dd02l-tabname to <f1>.
select count(*) from (<f1>) into totalrecord.      " use like (<f1>)
wr_dd02l-totalrec = totalrecord.
write : wr_dd02l-tabname, wr_dd02l-totalrec, <f1>.
endloop.

Problem with "Row-specific or Cascading Lists in Table Layout"

Hello, friends!
I have read article "Row-specific or Cascading Lists in Table Layout" written by Steven Davelaar. I have maked several table layouts with this technique and it worked fine.
But now I have one problem, and this problem is very strange. One of VOs for which I use this table layouts throw exception after commit changes on first LOV attribute (Deptno). First time it was error
(oracle.jbo.ReadOnlyAttrException) JBO-27008: for atribute mgrList
at oracle.jbo.AttrValException.<init>(AttrValException.java:112)
     at oracle.jbo.ReadOnlyAttrException.<init>(ReadOnlyAttrException.java:40)
     at oracle.jbo.server.ViewRowImpl.setAttribute(ViewRowImpl.java:815)
     at oracle.jbo.jbotester.JboTesterUtil.setData(JboTesterUtil.java:173)
Then I setted updateable property of MgrList attribute to always and now i have this error:
oracle.jbo.domain.DataCreationException: JBO-25009: Cannot create an object of type:java.util.List with value:[{}]
     at oracle.jbo.domain.TypeFactory.get(TypeFactory.java:721)
     at oracle.jbo.domain.TypeFactory.getInstance(TypeFactory.java:85)
I don't know why, but all worked fine yestarday. And same code works fine for another VOs. And article Test application works fine too.
Help me, please.
Thank you.

<table id="OsnovaniyaPrikazEnd" model="${jhsTableBindings.OsnovaniyaPrikazEnd_1B}" detailDisclosure="${uix.eventResult.detailData}" partialRenderMode="multiple" partialTargets="messageBox _uixState " proxied="true" alternateText="${nls.NO_ROWS_FOUND}" width="50%" rendered="${bindings.newGroup_end2Iterator.findMode!='true'}">
<tableFormat tableBanding="rowBanding"/>
<contents>
<formValue value="${uix.current.rowKeyStr}" name="rowKeyStr" id="${ui:concat('OsnovaniyaPrikazEnd:rowKeyStr:',uix.current.tableIndex)}"/>
<column>
<columnFormat displayGrid="true" cellNoWrapFormat="true" columnDataFormat="numberFormat"/>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OsnovaniyaPrikazEnd,'Id')}" text="Id" required="yes"/>
</columnHeader>
<contents>
<messageTextInput id="${ui:concat('OsnovaniyaPrikazEnd:Id:',uix.current.tableIndex)}" model="${ui:cond(uix.current.isNewRow,null,uix.current.newGroup_end2Id)}" text="${uix.current.OsnovaniyaPrikazEndId}" name="Id" promptAndAccessKey="&Id" rows="1" maximumLength="1" columns="1">
<onSubmitValidater>
<decimal/>
</onSubmitValidater>
</messageTextInput>
</contents>
</column>
<column>
<columnFormat displayGrid="true" cellNoWrapFormat="true" columnDataFormat="numberFormat"/>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OsnovaniyaPrikazEnd,'IdPrikaz')}" text="IdPrikaz"/>
</columnHeader>
<contents>
<messageTextInput id="${ui:concat('OsnovaniyaPrikazEnd:IdPrikaz:',uix.current.tableIndex)}" model="${ui:cond(uix.current.isNewRow,null,uix.current.newGroup_end2IdPrikaz)}" text="${uix.current.OsnovaniyaPrikazEndIdPrikaz}" name="IdPrikaz" promptAndAccessKey="&IdPrikaz" rows="1" maximumLength="1" columns="1">
<onSubmitValidater>
<decimal/>
</onSubmitValidater>
</messageTextInput>
</contents>
</column>
<column>
<columnFormat displayGrid="true" cellNoWrapFormat="true" columnDataFormat="numberFormat"/>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OsnovaniyaPrikazEnd,'IdOsnovanie')}" text="На основании"/>
</columnHeader>
<contents>
<messageChoice id="${ui:concat('OsnovaniyaPrikazEnd:IdOsnovanie:',uix.current.tableIndex)}" model="${ui:cond(uix.current.isNewRow,null,uix.current.IdOsnovanie)}" name="IdOsnovanie" promptAndAccessKey="&IdOsnovanie" selectedValue="${uix.current.newGroup_end2IdOsnovanie}">
<contents childData="${jhsTableBindings.Osnovaniya_not_viewVO_1T.rangeSet}">
<option value="${uix.current.Id}" text="${uix.current.Text}"/>
</contents>
<primaryClientAction>
<firePartialAction event="whenListChanged" formSubmitted="true" unvalidated="true" targets="${ui:cond(uix.current.isNewRow,'OsnovaniyaPrikazEnd', 'OsnovaniyaPrikazEnd')}"/>
</primaryClientAction>
</messageChoice>
</contents>
</column>
<column>
<columnFormat displayGrid="true" cellNoWrapFormat="true" columnDataFormat="numberFormat"/>
<columnHeader>
<sortableHeader model="${ctrl:createSortableHeaderModel(bindings.OsnovaniyaPrikazEnd,'IdMoves')}" text="IdMoves"/>
</columnHeader>
<contents>
<messageChoice rendered="${uix.current.ListLength>'1'}" id="${ui:concat('OsnovaniyaPrikazEnd:IdMoves:',uix.current.tableIndex)}"
model="${ui:cond(uix.current.isNewRow,null,uix.current.OsnovaniyaPrikazEndIdMoves)}" name="IdMoves" promptAndAccessKey="&IdMoves"
selectedValue="${uix.current.newGroup_end2IdMoves}">
<contents childData="${uix.current.MovesList.inputValue}">
<option value="${uix.current.Id}" text="${uix.current.Fam1}"/>
</contents>
</messageChoice>
</contents>
</column>
<column>
<columnFormat displayGrid="true" columnDataFormat="iconButtonFormat"/>
<columnHeader>
<text text="Удалить?"/>
</columnHeader>
<contents>
<checkBox name="deleteRow" value="ok"/>
</contents>
</column>
</contents>
</table>
Thank you.

If a User has select only on a table, it isn't listed in TABLES

I have a group of Users I want to be able to access a view of the table (select only).
I created a role and table/select privs. for those users. In SQL Developer they
do not see a list under TABLES for those tables they have SELECT Access to.
They can, however, enter a query (if they know the name) and select from the table,
but they have to know the table name and they are not listed.
Is there an Oracle priv. a user must have to have to view the TABLES (although they
only have select)?

Yes, I would think so. But for all the tables listed, when you click on the DATA tab you do not see any data. The only way to view is to go the SQL Worksheet and query *
from the table.
The user has SELECT on the tables.

How to update a Z-table in ECC for the data coming from CRM

Hi Experts,
I need to store the industry code and description from customer master from CRM into a Z-table in ECC.I have checked the BDOC segments is already there in CRM.This Z-table has to be updated each time when the user save the customer master.This Z-table will be non editable in ECC.
Thanks in advance.
Regards,
Sumit

Hello,
Do you synchronize CRM business partner with ECC business partner?
Because in standard industry code & description are replicated between both objects... so I don't really understand what you try to do.
Anyway, if you would like to save some information in a Z table each time a business partner gets replicated into ECC, you can register a function module in table COM_BUPA_CALL_FU on ECC to do the job.
Kind regards,
Nicolas Busson.

Create UDF for table not in the List of tables

Hi all,
I know that my question maybe easy or been asked before, but I couldn't find the answer.
To create a UDF in SAP B1 version 9.0 you should go Tools -> Customization Tools -> User-Defined Fields - Management...
which is ok and working perfect. but my question is:
If I want to create UDF for a table not in the list of tables there what should I do? I need to create 2 UDFs for table OMRC [Manufacturers], and can't find it in master data tables.
anyone had this issue before?
EDIT : Is it good to add the field by using sql server? I know it's possible, but will it be visible in SAP
thank you
Message was edited by: Samira Haroun

Hi Samira,
There is noit a simple link for this, I advise you to study the documentation for TB1300 SBO Development Certification.
Ypu should also have knowledge of .net, and C# or VB, because you have to make a small program/addon to add the fields
Kind regards
Ad Kerremans

How to find the list of Tables....

Hi
How to find the list of Tables associated with When a Goods Issue is done for a Process Order ??
Kindly tell me step-by-step procedure in browsing it.
cheers
MaruthiRam

Hi
goto SE16 Click F4, You have two options Information system & Sap Applications.
Click on SAP Applications & selec the application you wnat to see, for E.g Purchasing you can click on materials managemnt, Purchasing if you drill down you will see the list of tables....
reward points if useful
Thanks & Regards
Kiran

Query to find out the list of tables used in a package

hello,
can anyone please help me out with a query; i want to find out the list of tables used by a particular package.
thanks,
orton

orton607 wrote:
thanks for replying guys. But the thing is i am using dynamic sql execute immediate in my package, so i want those tables also and the schema name.
thanks,
ortonThis is not possible. The best you could do is to have a good guess.
Or how would you parse some dynamic statement as this:
   v_suffix := 'loyees';
   v_sql := 'Select count(*) from (select ''nonsense'' col1 from emp'||v_suffix||') where col1 = ''Y'''';
   execute_immediate(v_sql);
...What is the table name? How do you want to parse that?
Better rewrite all dynamic SQL statements into non dynamic ones. Or do the source control logic for those dynamic parts in an extra module. For example implement your own dependency table and force every developer to add there all dynamic parts.

How to see all the list of tables in APEX

Hi
COuld anyone of you help me find out how to see all the tables present in APEX ?
I can see all the list of tables when i give the command : select * from tab
But apart from finding like this , is there any way to find out all the list of tables ?
Regards,
Tasha

Hi Tasha,
For Apex 3.2 ;
select * from dba_tables where owner in
(select workspace from APEX_030200.APEX_WORKSPACES)
tab is a synonym for user_tables
http://www.oreillynet.com/pub/a/network/2002/10/28/data_dictionary.html
hope this helps you
regards
mozkavra

List of Tables used in IS Retail

Hi ,
I am currently desingning an adapter to integrate IS Retail and non SAP BI Solution. I need your help on the complete list of tables used in IS-Retails. It would be great if you could provide me the tcodes as well.
Expecting a prompt reply from experts.
Regards,
Raghu.
SAP Adapter Specialist.

Dear Raghavendra,
There are lot of SAP tables in IS Retail.
You can search all tables using transaction code SE16 or SE16N
For which transaction, you need SAP Table details?
Bye,
Muralidhara

Domain index on list-partitioned table?

Hi,
I have a list-partitioned table, and wanted to create a partitioned Oracle Text index on it. I keep getting an error, and am now wondering if it's possible to do. Here is my syntax:
CREATE INDEX SCHEMA1.IDX_ALL_TEXT_LOCAL ON SCHEMA1.TABLE1(ALL_TEXT)
INDEXTYPE IS CTXSYS.CONTEXT
LOCAL
(PARTITION PTN1 PARAMETERS('sync (on commit) storage ptn1'),
PARTITION PTN2 PARAMETERS('sync (on commit) storage ptn2'),
PARTITION PTN3 PARAMETERS('sync (on commit) storage ptn3'),
PARTITION PTN4 PARAMETERS('sync (on commit) storage ptn4'),
PARTITION PTN5 PARAMETERS('sync (on commit) storage ptn5'),
PARTITION PTN6 PARAMETERS('sync (on commit) storage ptn6'),
PARTITION PTN7 PARAMETERS('sync (on commit) storage ptn7'),
PARTITION PTN8 PARAMETERS('sync (on commit) storage ptn8')
PARAMETERS('section group my_group lexer new_lexer');
ERROR at line 1:
ORA-29850: invalid option for creation of domain indexes
Any advice would be much appreciated.
Thanks,
Nora

... will it spread the index across the tablespaces that are associated with each partition?No, as demonstrated below.
SCOTT@orcl_11gR2> CREATE TABLE table1
2      ( id         NUMBER(6),
3        all_text      VARCHAR2 (20)
4      )
5 PARTITION BY LIST (id)
6   (PARTITION ptn1 VALUES (2,4) TABLESPACE example,
7    PARTITION ptn2 VALUES (3,9) TABLESPACE example
8   )
9 /
Table created.
SCOTT@orcl_11gR2> INSERT ALL
2 INTO table1 VALUES (2, 'test2')
3 INTO table1 VALUES (3, 'test3')
4 INTO table1 VALUES (4, 'test4')
5 INTO table1 VALUES (9, 'test9')
6 SELECT * FROM DUAL
7 /
4 rows created.
SCOTT@orcl_11gR2> CREATE INDEX IDX_ALL_TEXT_LOCAL
2 ON TABLE1 (ALL_TEXT)
3 INDEXTYPE IS CTXSYS.CONTEXT
4 /
Index created.
SCOTT@orcl_11gR2> SELECT table_name, tablespace_name
2 FROM   user_tab_partitions
3 WHERE table_name = 'TABLE1'
4 /
TABLE_NAME                     TABLESPACE_NAME
TABLE1                         EXAMPLE
TABLE1                         EXAMPLE
2 rows selected.
SCOTT@orcl_11gR2> SELECT table_name, tablespace_name
2 FROM   user_tables
3 WHERE table_name LIKE '%IDX_ALL_TEXT_LOCAL%'
4 /
TABLE_NAME                     TABLESPACE_NAME
DR$IDX_ALL_TEXT_LOCAL$I        USERS
DR$IDX_ALL_TEXT_LOCAL$R        USERS
DR$IDX_ALL_TEXT_LOCAL$N
DR$IDX_ALL_TEXT_LOCAL$K
4 rows selected.
SCOTT@orcl_11gR2>

How to get a list of tables in an application

In version 6.0 I could do a simple join on views CI_TABLE_DEFINITIONS and CI_APPLICATION_SYSTEMS to get a list of table names given the name of the application system. The requisite columns to perform the join aren't there anymore in version 6i. How does on accomplish this?

Roger,
The link between containers (Folders and Application Systems) and the objects they own is recorded in a different fashion in Designer 6i. There is a new view SDD_FOLDER_MEMBERS that contains this link. It is an intersection between the containers on the one hand and all other PAC objects on the other.
The query you are after is now written as follows:
select tbl.name
, tbl.irid
from ci_application_systems app
, sdd_folder_members fm
, ci_table_definitions tbl
where app.name = 'APP NAME'
and app.irid = fm.folder_reference
and fm.member_object = tbl.irid
order
by tbl.name
Note: if you do not set the workarea context before running this query, you will get rows returned for all versions of the Application System times all versions of the Tables owned by the Application System. You can set the workarea context by executing this statement before executing the query:
begin
jr_context.set_workarea('Workarea Name');
end;

Parsing query and getting list of tables used

Hi All,
   I require to parse sql query (simple & complex as well) and to get the list of tables used in the query.
   And need to validate that, the list of tables against a whitelist to maintained in the file.
I tried to write my own parser, since there are lots possible ways to write complex queries, i am unable to cover all the scenarios.
I require a help, Is there any other ways to get the list of tables used in a query?
Thanks,
Mahendran..

user10279893 wrote:
Hi All,
   I require to parse sql query (simple & complex as well) and to get the list of tables used in the query.
   And need to validate that, the list of tables against a whitelist to maintained in the file.
I tried to write my own parser, since there are lots possible ways to write complex queries, i am unable to cover all the scenarios.
I require a help, Is there any other ways to get the list of tables used in a query?
Thanks,
Mahendran..
You'll never cover all scenarios by trying to parse a query.
For example, what about a query that queries views and those views query pipelined functions, and those pipelined functions query other views or tables or pipelined functions etc.
And what about a query that dynamically obtains the table names, such as...
SQL> select
2    table_name,
3    to_number(
4      extractvalue(
5        xmltype(
6 dbms_xmlgen.getxml('select count(*) c from '||table_name))
7        ,'/ROWSET/ROW/C')) count
8 from user_tables
9 where iot_type != 'IOT_OVERFLOW'
10 or    iot_type is null;
TABLE_NAME                      COUNT
DEPT                                4
EMP                                14
BONUS                               0
SALGRADE                            5
.. in this case the tables being accessed (to count their rows) are not even known within the code, they are dynamically generated queries at run-time, so the only way to know what tables are accessed is to actually run the query.
Of course, a well designed system, with proper documentation and version control would allow you to take any database object and know where and what is using it, and whether it's even being used.

Code To Update the Table in ECC from Webdynpro

Hi All,
I want to know, the table is dispalyed in the webdynpro browser when we calls the Adaptive RFC Model.
after i want to add one more row in the webdynpro and just clicking on add button the row will be updated in the ECC server(backend) for that how can i write the coding, regarding this issue can you please help me.
ThanX All,

Hi Sriram,
          Assuming you have a table filled with records by adding one by one, If you want to update a table in SAP ECC, follow these steps..   i think already you are triggering the action for the button in view(for table updation) to method in controller or created a custom controller and mapped the model node.
1. Initialize the main model node and bind the model node with the intialised object like
     Zbapi_MainModelNode_Input input = new Zbapi_MainModelNode_Input();
                       wdContext.nodeZbapi_MainModelNode_Input ().bind(input);
2. Now loop the table node and set the values with corresponding class in the generated model (from webdynpro explorer) and initialize like
        IPrivateControllerName.ITableElement myTab = null;
       for ( int i = 0; i < wdContext.nodeTable().size();i++)
                     myTab = this.wdContext.nodeTable().getTableElementAt(i);
     Bapi_structname name = new Bapi_structname();
                    name.setFieldName1(myTab.getFieldName1);
                    name.setFieldName2(myTab.getFieldName2);
                    input.addT_Bapi_(name);
Finally execute the BAPI..
   wdContext.currentZbapi_MainModelNode_Input tElement().modelObject().execute();
Hope this solves your issue - Update the Table in ECC from Webdynpro.
Regards,
Manjunath
Edited by: Manjunath Subramani on Nov 20, 2009 4:26 PM
Edited by: Manjunath Subramani on Nov 20, 2009 4:27 PM

How to get the list of tables having index in particular tablespace

HI
can anyone help me with this
i need to display the list of tables that are having indexes in a particular tablespace(let it be A)
and the list of tables that are not having indexes in tablespace A.
thanks in advance...

user8884944 wrote:
HI
can anyone help me with this
i need to display the list of tables that are having indexes in a particular tablespace(let it be A)
and the list of tables that are not having indexes in tablespace A.
thanks in advance...Use TABLESPACE_NAME, INDEX_NAME and TABLE_NAME columns of DBA_INDEXES view
[Kamran Agayev A. |http://kamranagayev.wordpress.com] (OCP 9i/10g)
Author of the upcoming book - *"Oracle Backup & Recovery: Expert secrets for using RMAN and Data Pump"*
http://www.rampant-books.com/book_1002_rman_backup_recovery.htm

List of tables in ECC 6.0

Similar Messages

Maybe you are looking for