Listeners Problem oracle11g R2 Data Guard RAC?

Hi,
I want to Static Register LISTENERDB in Data Guard RAC.
LSNRCTL> start listenerdb
Starting /u02/app/oracle/product/11.2.0/dbhome_1/bin/tnslsnr: please wait...
TNSLSNR for HPUX: Version 11.2.0.1.0 - Production
System parameter file is /u02/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Log messages written to /u02/app/oracle/diag/tnslsnr/drpdb1/listenerdb/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENERDB)))
TNS-01155: Incorrectly specified SID_LIST_listenerdb parameter in LISTENER.ORA
NL-00303: syntax error in NV string
Listener failed to start. See the error message(s) above...
LSNRCTL>
Listene.ora file: user Oracle
LISTENERDB=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENERDB)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENERDB=ON # line added by Agent
SID_LIST_LISTENERDB =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /u02/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = drpdb1)
(GLOBAL_DBNAME = drpdb.nblitd.com)
Please help
Thanks
Solaiman

Hi,
Please check below thread. Seems like same problem.
http://www.orafaq.com/forum/t/87764/2/
Cheers
Sush

Similar Messages

Steps for data guard RAC primary RAC standby

Hi,
I have some doubt in configuring data guard for rac DR to rac primary.
1) In RAC DR, physical standby will be in RAC before starting data guard for RAC Primary , right?.
2) While configuring RAC DR , should one node be down in standby?.
3) After creating the auxiliary database in standby, i mean restoring the rman backup from staging directory in DR,
Shall we have to register the services(database,instance,asm,etc..) to CRS(OCR)?. If yes ,Why?.
4) After DR configure over , Shall i shut/down one node?. Should all the nodes in DR be in up , while applying logs to
standby ?.
If anybody have made the setup and have the prepared document , requesting you to share with me.
Thank you very much,
Sunand

Hi Sunand,
Please follow the following My Oracle Support (MOS) Document ID:
MAA - Creating a RAC Physical Standby for a RAC Primary [ID 380449.1]
For further details, see the referred documents in previous post. Try practicing on VMWare because it will give you the flexibility for creating snapshots to save your work. Please see the answers for your question below:
Q1. In RAC DR, physical standby will be in RAC before starting data guard for RAC Primary , right?.
Answer: Yes, this is recommend but not mandatory. You can add a second node later on.
Q2. While configuring RAC DR , should one node be down in standby?
Answer: Yes, there are some database configuration commands that should be run in exclusive mode. You can start the remaining instance(s) after DB creation. Do not forget to set CLUSTER_DATABASE parameter to TRUE. Also, all instances except one should be close while performing switchover/failover.
Q3. After creating the auxiliary database in standby, i mean restoring the rman backup from staging directory in DR, Shall we have to register the services(database,instance,asm,etc..) to CRS(OCR)?. If yes ,Why?
Answer: Yes, this is recommended for RAC configuration to take advantage of high availability services.
Q4. After DR configure over , Shall i shut/down one node?. Should all the nodes in DR be in up , while applying logs to
standby ?
Answer: You can start up all the instances after DR creation. In this case if your one node goes down log apply services will continue to apply changes in DR.
Hope, this helps to clear your questions.
Regards,
Shahid

DB link problem between active Data Guard and report application database

My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
SQL> select name, database_role, open_mode from v$database;
NAME DATABASE_ROLE OPEN_MODE
ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
Problem detail is below
I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
Database link created.
But when I run a query using db link from my report application database I got this below error.
ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
ORA-02063: preceding line from DATADB_LINK
Then I check Active Data Guard database alart log file and get below error
ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
So is it a problem of DB link between active Data Guard and other database?

Fazlul Kabir Mahfuz wrote:
My database version in 11.2.0.2.0 and OS is Oracle Solaris 10 9/10.
I am facing a problem in my Active data guard Database for reporting purpose. Active Data guard information is as below.
SQL> select name, database_role, open_mode from v$database;
NAME DATABASE_ROLE OPEN_MODE
ORCL PHYSICAL STANDBY READ ONLY WITH APPLY
Problem detail is below
I have created a db link (Name: DATADB_LINK) between active data guard and report application database for reporting purpose.
SQL> create database link DATADB_LINK connect to HR identified by hr using 'DRFUNPD';
Database link created.
But when I run a query using db link from my report application database I got this below error.
ORA-01555: snapshot too old: rollback segment number 10 with name "_SYSSMU10_4261549777$" too small
ORA-02063: preceding line from DATADB_LINK
Then I check Active Data Guard database alart log file and get below error
ORA-01555 caused by SQL statement below (SQL ID: 11yj3pucjguc8, Query Duration=1 sec, SCN: 0x0000.07c708c3):SELECT "A2"."BUSINESS_TRANSACTION_REFERENCE","A2"."BUSINESS_TRANSACTION_CODE",MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'feature' THEN "A1"."TRANS_DATA_VALUE" END ),MAX(CASE "A1"."TRANS_DATA_KEY" WHEN 'otherFeature' THEN "A1"."TRANS_DATA_VALUE" END )
But the interesting point if I run the report query directly in Active Data Guard database, I never got error.
So is it a problem of DB link between active Data Guard and other database?
Check this note which is applicable for your environment
*ORA-01555 on Active Data Guard Standby Database [ID 1273808.1]*
also
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:8908307196113

Problem in 11g data guard

Hi all
i install 11g on two computers.
On primary database i run the follwing commands.
ALTER DATABASE FORCE LOGGING;
DB_NAME=orcl
DB_UNIQUE_NAME=orcl
CONTROL_FILES='D:\app\Administrator\oradata\orcl\control1.ctl', 'D:\app\Administrator\oradata\orcl\control2.ctl',
'D:\app\Administrator\oradata\orcl\control3.ctl'
LOG_ARCHIVE_DEST_1=
'LOCATION=E:\archive
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=orcl'
LOG_ARCHIVE_DEST_2=
'SERVICE=orcl ASYNC
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=orcl'
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=ENABLE
LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
LOG_ARCHIVE_MAX_PROCESSES=30
SQL> alter system set FAL_SERVER=orcl;
SQL> alter system set FAL_CLIENT=orcl;
SQL> alter system set STANDBY_FILE_MANAGEMENT=AUTO;
SQL> SHUTDOWN IMMEDIATE;
SQL> STARTUP MOUNT;
SQL> ALTER DATABASE ARCHIVELOG;
SQL> ALTER DATABASE OPEN;
SQL> SHUTDOWN IMMEDIATE;
SQL> STARTUP MOUNT;
SQL> ALTER DATABASE CREATE STANDBY CONTROLFILE AS 'c:\stanctl.ctl';
SQL> CREATE PFILE='c:\initstand.ora' FROM SPFILE;
i copy stanctl.ctl,initstand.ora on standby computer and run the follwing commands.
DB_NAME=orcl
DB_UNIQUE_NAME=orcl
CONTROL_FILES='D:\app\Administrator\oradata\orcl\stanctl01.ctl', 'D:\app\Administrator\oradata\orcl\stanctl02.ctl',
'D:\app\Administrator\oradata\orcl\stanctl03.ctl'
LOG_ARCHIVE_DEST_1=
'LOCATION=E:\archive
VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
DB_UNIQUE_NAME=orcl'
LOG_ARCHIVE_DEST_2=
'SERVICE=orcl ASYNC
VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)
DB_UNIQUE_NAME=orcl'
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=ENABLE
LOG_ARCHIVE_FORMAT=%t_%s_%r.arc
LOG_ARCHIVE_MAX_PROCESSES=30
SQL> alter system set FAL_SERVER=orcl;
SQL> alter system set FAL_CLIENT=orcl;
SQL> alter system set STANDBY_FILE_MANAGEMENT=AUTO;
SQL> SHUTDOWN IMMEDIATE;
SQL> STARTUP MOUNT;
SQL> ALTER DATABASE ARCHIVELOG;
STARTUP NOMOUNT;
ALTER DATABASE MOUNT STANDBY DATABASE;
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION;
i make spfileorcl.ora of initstand.ora and put it at
D:\app\Administrator\product\11.1.0\db_2\database
SQL> startup
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size 1334380 bytes
Variable Size 171967380 bytes
Database Buffers 356515840 bytes
Redo Buffers 5844992 bytes
Database mounted.
ORA-16004: backup database requires recovery
ORA-01245: offline file 1 will be lost if RESETLOGS is done
ORA-01110: data file 1: 'D:\APP\ADMINISTRATOR\ORADATA\ORCL\SYSTEM01.DBF'

The answer depends on the protection level are you using, If you are using maximum performance or maximum availability you can use 6 groups with 1 member in each group, in case of redo corruption the primary database will continue to function properly and you will have time to fix the corrupted redo. If you are planning to use maximum protection I would recommend at least 2 members in each group, to avoid primary crush in case of standby redo corruption.
Checkout [http://www.dbsnaps.com/articles/ora_active_standby] for step by step data guard configuration video.
Oded Raz
[www.dbsnaps.com]
[www.orbiumsoftware.com]

Oracle11g heterogenous data guard Linux-ASM primary, Windows-Filesystem standby

Is it possible to setup a standby database on (Windows 64bit) OS filesystem with 32GB datafile limit that syncs with a primary database on (Linux 64bit) ASM that has datafiles that are larger than 32GB.
There is a Linux-ASM standby in place, this will be an additional standby, to be used as a reporting database using Oracle11g snapshot standby
I have used datapump to export-import from Linux-ASM to Windows-filesystem by precreating additional 32GB datafiles in the Windows database, the import works, it takes too long to import for a reporting database
it's not clear to me how to synchronize the new standby without using RMAN full or incremental backup-restores
Any suggestions or suggested document IDs are welcome!
Thank you,
Drew Salisbury

Hi Drew,
Standby files have to be the same size/distribution as the primary - that can be differnet os, in ASM etc but they have to be the same number and size.
There are some ways to speed up import - parallel etc but in a big database there is always a lot of time lost in index building post data load.
How feasible is it to shrink the datafiles in wondows nack to 32GB......?
Can you set up ASM on windows?
You could use streams or something to replicate and keep the copy you created up to date rather than using physical standby?
Cheers,
Rich

Data Guard & Real Application Clusters

Hello, i have a problem with my data guard configuration. I am configuring data guard in a RAC
but i don'n know how to configured the redo sending to the standby database.
I would like any documentation about it.
thanks.

Here are some links:
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10g_RACPrimaryRACPhysicalStandby.pdf
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10g_RACPrimarySingleInstancePhysicalStandby.pdf
And of course there is the manual:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10700/toc.htm
Check out Chapter 3 and Appendices D and F.
Larry

How to configure Enterprise Manager in Active Data Guard?

Hi,
I have installed oracle 11g r2 rac with asm in two nodes. OS is hp-Unix.
I have installed oracle11g Active Data Guard using Single alone Database.
Both RAc and Active Data Guard works fine.
I have not configure Data Guard Broker.
Question: How to configure Enterprise Manager in Active Data Guard?
Thanks
Solaiman

http://www.gokhanatil.com/2012/04/manage-your-existing-data-guards-with.html

Oracle11g R2 Active Data guard using ASM Problem?

I have configured oracle11g r2 RAC on 2 notes using ASM Grid ( OS unix).
RAC is up and running.
Now I am configuring Active data Guard.
Under grid user instance +ASM and listener is running.
Under oracle user static listener is running.
All disk is mounted.
Oracle RAC and Data Guard directory and structure I have keeped same.
Now my problem is below:
$ ./rman target sys/HPinvent123nbl@dcpdb AUXILIARY sys/HPinvent123nbl@drpdb
Recovery Manager: Release 11.2.0.1.0 - Production on Wed Jan 16 16:28:32 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DCPDB (DBID=316773134)
connected to auxiliary database: DRPDB (not mounted)
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 16-JAN-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=5644 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u02/app/oracle/product/11.2.0/dbhome_1/dbs/orapwdcpdb1' auxiliary format
'/u02/app/oracle/product/11.2.0/dbhome_1/dbs/orapwdrpdb' ;
executing Memory Script
Starting backup at 16-JAN-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=1897 instance=dcpdb1 device type=DISK
Finished backup at 16-JAN-13
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 01/16/2013 16:28:48
RMAN-06136: ORACLE error from auxiliary database: ORA-00200: control file could not be created
ORA-00202: control file: '+data'
ORA-17502: ksfdcre:4 Failed to create file +data
ORA-15001: diskgroup "DATA" does not exist or is not mounted
ORA-15055: unable to connect to ASM instance
ORA-01031: insufficient privileges
RMAN>
Please help.\
Thanks
Solaiman

root@drpdb1 []# id oracle
uid=108(oracle) gid=700(oinstall) groups=701(dba)
root@drpdb1 []# id grid
uid=109(grid) gid=700(oinstall) groups=701(dba),702(asmdba)
Edited by: 876149 on Jan 16, 2013 3:19 AM

Oracle RAC / Logical Data Guard causing network problems on VMware

We have VMWare 5.0 cluster across the 12 blades (6 per chassis) running a mixture of Red Hat and Windows 2008 R2 vms. The Red Hat boxes are two times two node Oracle RAC (primary and secondary), also apache web servers and jboss application servers. The Windows servers are for AV/DC/Management/Monitoring.
The problem is that intermittent network connectivity to random Windows and Red Hat boxes occur when the Oracle RAC builds up archive logs and then ships / applies them to the secondary nodes, between ESX nodes either on different blades in the same chassis or across the chassis and even when all RAC nodes are on the same ESX host.
We are using NFS, Oracle 11g and Red Hat 6.2.
Sorry if this info is a bit vague, im not an Oracle expert! :-)
thanks,
Dave

Hi,
1.) The calculation for Standby RedoLogs is:
(Max Number of Logfiles per thread (Instance) +1) * Max Number of Threads (Instances))
So if you have 4 Redo Log Groups on your primary (which is 2 Redo Log Groups per Instance), then it ends up:
(2 +1) * 2 = 6
So actually you will only need 6 standby redo logs, not 8. But 2 more don't harm.
Your primary will need exactly the same number (6 or in your case 8). Which will be 3 per thread/instance or in your case 4.
2.) The SID List in the listener.ora is a listing of SIDs the Listener is listening on. It is not the listener name.
Hence it is not "lsnrctl guard_dgmgrl start" but only "lsnrctl LISTENER start", whereas the LISTENER is the default and "lsnrctl start" would be sufficient.
However since this is grid infrastructure with the listener running out of ASM home, be sure to have set your environment to GI Home not to DB_HOME for the listener.ora entries, but to DB_HOME for the tnsnames.ora entries necessary for data guard.
And since listener is running under clusterware you should use "srvctl stop listener" and start.
Last but not least the SID entries for dataguard have to use DGMGRL not dgmgrl.
3.) Here is the whitepaper you are looking for:
www.oracle.com/goto/maa
Also for client failover best practices.
(Here the direct link to the RAC whitepaper):
http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimarysingleinstance-131970.pdf
However since this is 10g you should combine this with the 11g RAC standy paper (e.g. SCAN Listener setup).
Sebastian

Data guard performance problem (rac to single instance)

i have a table it has GPS data, and gps table has too many data, 5 millions,
iam using RAC (2 nodes 11gr2). standby database is single instance data guard,
single instance database (standby)'s hardware cpu is lower than RAC machines. rac nodes have (15k) disks, standby has (7200rpm),
so i dont want to use GPS tables on data guard system, i dont want to run GPS table's DML commands (delete, insert), i think it may increase performance,
is it posible? what is your advise?
any feedback makes me happy,
best regards

it's not possible with data guard, but you can use streams or golgengate for this purpose. Have a look at dataguard performance tuning guide. Maybe there is something you can fix on the configuration to be faster.
[Data Guard Redo Apply and Media Recovery Best Practices|http://www.oracle.com/technetwork/database/features/availability/maa-wp-10grecoverybestpractices-129577.pdf]
[Redo Transport and Network Best Practices|http://www.oracle.com/technetwork/database/features/availability/maa-wp-11gr1-activedataguard-1-128199.pdf]
I don't know an 11g version for these docs but they would still help.

Data Guard Summary problem using Grid Control.

I setup data guard using Grid Control and after completion, the console of the standby database shows: "Unable to determine Data Guard information." under the Data Guard Summary section. The primary database is not showing the standby. I'm using Red Hat Linux Server 5.7 (64bit) and Oracle 10.2.0.5. This is a standalone (no RAC or ASM involved). When I run show configuration, the following comes up:
DGMGRL> SHOW CONFIGURATION;
Configuration
Name: PRODDB_ghph@ora01
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
ghph - Primary database
gsbh - Physical standby database (disabled)
Current status for "PRODDB_ghph@ora01":
SUCCESS
I tried searching online and metalink but nothing. Any help in solving this problem would be appreciated. TIA
Edited by: Gensis2001 on Jan 8, 2013 3:08 PM

Gensis2001 wrote:
Does this make any sense?
SYS@gsbh> SELECT * FROM V$ARCHIVE_GAP;
no rows selected
SYS@gsbh> select process, status, sequence# from v$managed_standby;
PROCESS STATUS SEQUENCE#
ARCH CLOSING 60353
ARCH CLOSING 60352
RFS IDLE 60354
MR(fg) WAIT_FOR_GAP 58673
4 rows selected.Currently standby is waiting for the sequence *58673* but the later on archives of series 60353... are already archived.
Can you confirm that only archive sequence * 58673* is missing or any more? If you have less number of archives are missing then see how the parameters you configured. like FAL_SERVER, LOG_ARCHIVE_CONFIG, LOG_ARCHIVE_DEST_n so on.
Check below command and see any errors with remote destinations
select severity,error_code,to_char(timestamp,'DD-MON-YYYY HH24:MI:SS') "timestamp" , message from v$dataguard_status where dest_id=2;Source: http://www.oracle-ckpt.com/dataguard_troubleshoot_snapper/
If the archives are missing so many and you do not have backup, then certainly you have to choose incremental roll forward to synchronize the primary database, then only you can see the configuration status of Broker as valid. You can refer this article to perform incremental roll forward http://www.oracle-ckpt.com/rman-incremental-backups-to-roll-forward-a-physical-standby-database-2/

Data guard setup for 2 node RAC primary to 2 node RAC standby

Hi All,
I am going to setup data guard for 2 node RAC primary to 2 node RAC standby on Oracle 10.2.0.4. in AIX5L.
Can you please provide the document on the above setup which is having all the steps (details).
Also, the documents on different scenarios like
1) If one node of standby goes down, how the redo logs will be applied. IS there any problem?
2) If both nodes of standby are failed, how to reciver them?
3) If one node of primary fails, is there any issue?
4) If two nodes of primary fails, is there any issue?
Thanks in advance,
Mahi

Have a look at the following location, you may find some similar documents:
http://www.oracle.com/technology/deploy/availability/htdocs/maa.htm
By
http://www.oraxperts.com

Problem with logminer in Data Guard configuration

Hi all,
I experience strange problem with applying of the logs in DataGuard configuration on the logical standby database side.
I've set up the configuration step by step as it is described in documentation (Oracle Data Guard Concepts and Administration, chapter 4).
Everything went fine until I issued
ALTER DATABASE START LOGICAL STANDBY APPLY;
I saw that log applying process was started by checking the output of
SELECT NAME, VALUE FROM V$LOGSTDBY_STATS WHERE NAME = 'coordinator state';
and
SELECT TYPE, HIGH_SCN, STATUS FROM V$LOGSTDBY;
but in few minutes it stoped and quering DBA_LOGSTDBY_EVENTS I saw the following records:
ORA-16111: log mining and apply setting up
ORA-01332: internal Logminer Dictionary error
Alert log says the following:
LOGSTDBY event: ORA-01332: internal Logminer Dictionary error
Wed Jan 21 16:57:57 2004
Errors in file /opt/oracle/admin/whouse/bdump/whouse_lsp0_5817.trc:
ORA-01332: internal Logminer Dictionary error
Here is the end of the whouse_lsp0_5817.trc
error 1332 detected in background process
OPIRIP: Uncaught error 447. Error stack:
ORA-00447: fatal error in background process
ORA-01332: internal Logminer Dictionary error
But the most useful info I found in one more trace file (whouse_p001_5821.trc):
krvxmrs: Leaving by exception: 604
ORA-00604: error occurred at recursive SQL level 1
ORA-01031: insufficient privileges
ORA-06512: at "SYS.LOGMNR_KRVRDREPDICT3", line 68
ORA-06512: at line 1
Seems that somewhere the correct privileges were not given or smth like this. By the way I was doing all the operations under SYS account (as SYSDBA).
Could smb give me a clue where could be my mistake or what was done in the wrong way?
Thank you in advance.

Which is your SSIS version?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

I have one problem with Data Guard. My archive log files are not applied.

I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!

Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap

Data Guard Related Problem

We are using oracle 9.2, i am facing a problem in the dataguard is that i want to know whether the log have been applied or not.....below are the outputs....
we are using manual data guard......
SELECT THREAD#, SEQUENCE#, APPLIED FROM V$ARCHIVED_LOG;
no rows selectedwhen i fire the above query it is not showing any result......
pls suggest me ..
SQL> show parameter stand
NAME                                 TYPE        VALUE
standby_archive_dest                 string      /arch/log
standby_file_management              string      MANUAL
SQL> SELECT THREAD#, MAX(SEQUENCE#) AS "LAST_APPLIED_LOG"
2 FROM V$LOG_HISTORY
3 GROUP BY THREAD#;
   THREAD# LAST_APPLIED_LOG
         1             1724
         2             1537
SELECT THREAD#, SEQUENCE#, APPLIED FROM V$ARCHIVED_LOG;
no rows selected

we are using a manual standby database.......
SQL> select DATABASE_ROLE, SWITCHOVER_STATUS,DATAGUARD_BROKER from v$database;
DATABASE_ROLE    SWITCHOVER_STATUS DATAGUAR
PHYSICAL STANDBY SESSIONS ACTIVE    DISABLED
SQL> show parameter stand
NAME                                 TYPE        VALUE
standby_file_management              string      MANUALso pls suggest me how would i know whether the archives have been applied or not.....
although i have posted the query which i was using for the same
and one more thing i am getting an error in alert log file also...
Sun Aug 10 12:28:09 2008
ORA-279 signalled during: ALTER DATABASE RECOVER    CONTINUE DEFAULT ...
Sun Aug 10 12:28:09 2008
ALTER DATABASE RECOVER    CONTINUE DEFAULT
Sun Aug 10 12:28:09 2008
Media Recovery Log /arch/log/1_1724.dbf
Sun Aug 10 12:31:09 2008
ORA-279 signalled during: ALTER DATABASE RECOVER    CONTINUE DEFAULT ...
Sun Aug 10 12:31:09 2008
ALTER DATABASE RECOVER    CONTINUE DEFAULT
Sun Aug 10 12:31:09 2008
Media Recovery Log /arch/log/1_1725.dbf
Errors with log /arch/log/1_1725.dbf
ORA-308 signalled during: ALTER DATABASE RECOVER    CONTINUE DEFAULT ...
Sun Aug 10 12:31:09 2008
ALTER DATABASE RECOVER CANCEL
Sun Aug 10 12:31:09 2008
Media Recovery Cancelled
Completed: ALTER DATABASE RECOVER CANCEL
Sun Aug 10 12:33:09 2008
alter database open read only
Sun Aug 10 12:33:09 2008
SMON: enabling cache recovery
Sun Aug 10 12:33:09 2008
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication fou
nd)
Completed: alter database open read only
#

Listeners Problem oracle11g R2 Data Guard RAC?

Similar Messages

Maybe you are looking for