Listing and customer orders

Hi everyone.
Has anybody experience with listing and customer orders in IS-Retail?
SAP Help says:
"Using assortments, you have...
- the ability to associate customers with assortments when creating customer orders or deliveries by having the system check the article listings. You can have the system control whether the customers can receive only those articles in their assigned assortments, or any articles in the entire assortment, or have the checking take place through a user exit."
I have created an assortment and have assigned a customer. As "basic listing rule", I have assigned "1 - Can only order the assortment assigned". After that, I have listed an articel into that assortment.
But if I create a customer order via transaction VA01 for this customer, nothing happens. I can still put every article in the customer order and there is no check of the article listings.
Does anybody have an idea, which setting(s) I am missing?

>
Tobias K. wrote:
> Hi Joe,
>
> basically, you can use the standard SD Listing check.
> The difference in IS-R is that it checks against Retail Listing conditions (entries in table WLK1).
> So, you have to do the following steps:
>
> - create assortments and list the articles according to your requirements
> - customize the SD Listing check (define a listing type and assign it to your sales document type)
> - assign the customers to the assortments (transaction WSOA2, tab assortment user)
> - the basic rule listing in the assignment has to be 1 ("can only order the assortment assigned")
>
> Now, in the customer order (sales document type as customized) the system should check against WLK1 if the customer is allowed to purchase this article.
>
> Regards
> Tobias
Hi,
How did you customized customer order should check against WLK1.
Thanks in advance
regards
Vijai Jain

Similar Messages

KMAT and customer order classification

Hi,
Is the usage of material type "KMAT" a MUST to use customer order classification ?
Carsten

No it is not. Even though all the documentation states that a configurable is of type KMAT, you really want to use either FERT or HALB, and just flag the material as "configurable" in the material master.
KMAT is the "old school" material type and I heard rumour that SAP doesn't even use it and may fade it out.
For ease of searching, reporting, etc, we usually create a new material type ZMAT, created from FERT or HALB. and always use that, but this part is not a hard requirement by any means.

Link Chart between New Listing and Custom OrgChart

Hello,
I created a new Listing and a Custom Org Chart. They're works fine.
When I'm editing my Listing in General Settings -> Link Configuration, I marked View In OrgChart and selected my custom orgchart.
So, when i login as user in OrgCHart, in My new Listing, I search for a Object and in Actions section I can see only Profile Option.
I can't See View In OrgChart.
What i forgot to do?
Thanks Again.

Hi João,
Sometimes this doesn't work - you need to edit the linkconfiguration that is named after your custom orgchart/search details panel(s). Without seeing the file I wouldn't know what to change, so if you can paste it here that will be helpful.
Best regards,
Luke

Sharepoint list and custom add attachment form

Hello.
Is it some how possible to dynamically create a custom form, in an iFrame, with the action as "/_layouts/attachFile.aspx?ListId={12345678-1234-1234-1234-123456789012}&;ItemId=2" to add an attachment to a list item?
I tried different things but nothing seems to actually attach the file.
Or, can I override UploadAttachment() so when the user clicks a button it shows the file selector dialog directly and after they are done I get notified so I can do something?
Any ideas?
Use Case:
I have a list. The list has a title, description (memo), an image path, and a "read more" path. The image and "read more" path are single line of texts. The user would do one of two things: provide the URL to a file that is already online,
or click "browse" to select a file to be attached to the item.
It is that last part I need help with. I can edit the NewForm.aspx to add a "<input type='file'..." but I can't figure out what I need to do then.
I can't use the default attach item because I need to know what file is for what, image or "read more". Which is why I want a button for "image" and "read more" so that after the user selects a file I can store some details that
will later let me identify what file is what.
My plan was to override the "save" button so that my code runs instead of the default.
Then I would use SPServices to create the item.
Then:
- I can't use FileReader so I cannot use the AddAttachment web service
- I can't use the existing "/_layouts/attachFile.aspx" because it won't let me dynamically set the file path
- I can't seem to create my own form dynamically that would attach the file
- I can call "UploadAttachment()" but that changes screens after the user clicks "OK" I won't know so I can't save the details I need

Hi,
According to your description, you might want to add a button “browse” in the NewForm/EditForm, when clicking it, users will be able to select a file to be attached
the current item.
If this is the case, you can add the script below with the <a> tag into the NewForm/EditForm, then when user clicks the <a> tag, the OOTB file browse dialog
will show up:
<script type="text/javascript">
function AttachFile()
SP.Ribbon.PageManager.get_instance().executeRootCommand("Ribbon.ListForm.Edit.Actions.AttachFile", null, null, null);
</script>
<a onclick='javascript:AttachFile();'>browse</a>
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Production List and Sales Order list on the basis of Sales Forecast - MRP

Hi all,
One of our user wants to use MRP. what he wants is that he puts sales forecast in the system and in the basis of that sales forecast, 2 reports should be generated from system , one will tell that when production should be started to meet sales forecast for every finished good and 2nd report will tell that when sales orders should be created for raw materials to achieve sales forecast for every finished good.
Is that possible?? Please tell me in steps that how I should I proceed? what changes should be done in SPRO and in master data?
Please respond.
Best Regards,
AI.

Hi AL,
As such, this is a basic functioanlity of MRP.
Once you enter a forecast & take a MRP run system proposes, when to start the production based on the production leadtime & purc.reqns for the raw materials based on the procurement lead time.
And the same can be viewed from various reports..FOr example MD04.
For this to work the MRP configurations should be valid.
Could you please confine your question to a specific query..?
Thanks & regards
Mahesh

Need help on Picking due list and Transfer order.

Hi Folks,
In our current process, the deliveries are taken from picking duelist (VL06O)and the transfer order is created manually. Now we want to automate this process. I know that it can be done by a batch job.
Could some one tell me the program that should be used in the batch job which takes the delivery numbers from picking duelist and creates transfer orders?
Points rewarded.
Regards,
Krishna

Hi
you can use this program WS_MONITOR_OUTB_DEL_PICK
or
In transaction VL06P you can give the selection criteria & click on Create TO in background. You can schedule this job as per your requirement.
Thanks & Regards
Kishore

Territorywise Customer List and Balance

Hi All,
How I can check Territorywise customer list and customer balance??
Regards

Hi,
You can see Customer wise - Sales employee wise Balance but not Territorywise report.
Check Sales Analysis report in Sales Reports.
Try this query ....
SELECT T0.[CardCode], T0.[CardName],T1.[descript],T0.[Balance],T0.[OrdersBal],T0.[DNotesBal],T2.[slpName]
FROM OCRD T0 INNER JOIN OTER T1 ON T0.Territory = T1.territryID
INNER JOIN OSLP T2 ON T0.slpcode = T2.slpcode
Thanks
Sachin

How to find the list of custom reports?

Hello All,
I am trying to get a list of all the custom reports that we have by responsiblity in 11.5.10.2. This to identify and move them into the our newly upgraded R12 instance.
Is there a query that can be written against the FND tables to get this listing?
Pls. help
Thanks,
Monkey.

I am trying to get a list of all the custom reports that we have by responsiblity in 11.5.10.2. This to identify and move them into the our newly upgraded R12 instance.
Is there a query that can be written against the FND tables to get this listing?There is no direct way to get the list of custom reports unless you followed the naming convensions when you created those reopports (i.e. your object/file name starts with XX_%).
https://forums.oracle.com/forums/search.jspa?threadID=&q=List+AND+Custom&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
In this case, you can query FND_CONCURRENT_PROGRAMS_TL/FND_CONCURRENT_PROGRAMS/FND_CONCURRENT_PROGRAMS_VL -- Search the forum for those objects and you will find many helpful queries.
Thanks,
Hussein

Display list of sales orders for one particular customer using BAPI in WD

Friends,
i want to display list of sales orders for one particular customer, the materials ordered, quantity ordered, goods issue date of that particular order and contact information about that particular customer, using Webdynpro.
Please somebody send me related info,blogs,help links , to complete this task, this is very urgent.
Please help
Peter

Find the WD tutorials here...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/web%20dynpro%20sample%20applications%20and%20tutorials.htm">Tutorials</a>

I want to order files (e.g., photos) in a particular order (not necessarily an order that is an option in MacOS. Ie, my own custom order, and I want them STAY in that order until I change the order. Is this possible?

I want to order files (e.g., photos) in a particular order (not necessarily an order that is an option in MacOS. Ie, my own custom order, and I want them STAY in that order until I change the order. Is this possible?

Custom sort order is not a typical option in the list view of any desktop computing systems I know of. The way you're seeing it work is also how it works in Windows and other systems.
There is no "None" sort order. What you're seeing is a "None" option under "Arrange By." Arranging is not the same as sorting; arranging is how the files are grouped in the window. For example, you can arrange (group) files by Kind while sorting by Name. You'll notice that if you are in List view and you choose Arrange By "None," in the window there is still a sort triangle next to the column name that it's sorting by.
If Arrange is set to None, the files appear in one big group (the traditional view) that is controlled by the Sort order (where there is no None option).
I didn't even know the difference between Sort and Arrange until I saw your question and did a little research! This Macworld article helped:
How to arrange and sort files in Lion Finder (also applies to later OSs like Mavericks)
As for your main question, how to do a custom sort order in the Finder, you can only rearrange files manually in Icon view. As with other operating systems, if you want to create a custom sort order for photos there are other ways:
Use a photo organizer application like iPhoto or Lightroom. Some let you have custom sort orders in folders, but others only let you have a custom sort inside a different container like an "album" or "collection". Having those additional container types is part of why photos are often best managed in an organizer application and not on the desktop.
Rename the files. You can use a renaming utility program to rename the photos with numbers that will enforce your sort order when sorted by name on the desktop, like
01 Photo.jpg
01 Photo.jpg
01 Photo.jpg
or
Photo 01.jpg
Photo 02.jpg
Photo 03.jpg

Get billing list by customer purchase order

Hi Experts:
                 Is there any standard T-code which can get billing list by customer purchase order ?
                Billing contains delivery-related and order-related,
                one po can has several sales order,and one sales order has several DN or Billing.
               Pls give me some advice.
                                                                                Thank you very much.

Dear Friend,
There is no standard Tcode for your requirement.There is two way to get so,
1. Either go for Abap Developed report.
2. Or try to get the some through Table.
Regards
AJIT K SINGH

Why does cutting and pasting ordered lists no longer preserve the line numbers

I often cut and paste ordered lists from web sites (track listings) to put with my downloaded tracks. Until the last update (not sure which version I was using with ubuntu 8.04 but it would have been the latest for that distro.) the line numbers were copied along with the ordered list, but they are not any more, so I have to type them all back in manually, which is a pain.
I have uninstalled firefox 9 to try to downgrade, but don't know which version would still work.

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Customer Returns and Replacement Orders

Hi,
What processes are involved with Customer Returns? How do we create a replacement order, and what should we do if a replacement is not issued?
Thanks,
Rathul.

Hi,
PGI (Post Goods Issue) may be cancelled by Transaction code VL09. The accounting document is just the reverse of the original PGI document.
In my company, we use project stock (movement type 601 Q for PGI). VL09 creates the movement type 602 Q. But rather than VL09, the generally accepted method in my company for the reverse items is to use the movement type 653, "back to the to the storage location." The accounting document takes the cost "from" the project and moves it back "to" the storage location.
The movement types are entered in the schedule lines in customizing, which are then assigned to the item categories. However, in this process, "no invoice" takes place. If you have a delivery related invoice, it should be cancelled beforehand.
If you do not give replacement, the Customer Account needs to be credited.
Please do not forget to create a Billing document (Formally Return Credit Memo) with reference to return delivery. It is very important in order to close the cycle. If you do not create a return credit memo, your delivery will keep appearing in the "Billing Due" list and with status "Being processed". When you create a return order type RE, the billing type is picked up as RE (Return Credit Memo) automatically.
When you are creating a replacement, you can create a replacement order, delivery, and billing. To create the replacement order, you can define an order type by copying from order type OR. In the copy control, you can define the relevant item categories from RE to OR. You can make reference Mandatory for this order type. The delivery type for this replacement order type will be LF and billing type F2.
Reward points if found helpfull..
Cheers,
Chandra Sekhar.

SP Designer 2010 - Saving custom list form impacts other list and other custom list form

Hi,
I have a source list, with custom display, edit and new forms all of them created in SP Designer 2010. These do nothing fancy, just for presentation purposes, fields were re-arranged in 2 columns.
Then I created a target list by saving the source list as template, the template brought over all customizations, all seemed to work fine. So I started to modify the target custom list forms.
Now here's the problem:
After a while making changes to the target list I realized that somehow the custom list forms on the source list had been modified... so I opened the source list in designer and noticed that the out of the box forms: NewForm.aspx, DispForm.aspx, EditForm.aspx
were now the default forms for the source list, and I couldn't pick my custom list forms to be the default forms for the source list anymore, they were not on the listbox. I could still see them by going in designer to All Files > Lists > SourceList
> and if I previewed them, they were empty.
I believe that somehow source and target list are linked, but why would designer allow making changes to the source list? like resetting the default forms, and breaking up the custom list forms that were in place?
I've verified list id's in the custom list forms of the target list and they belong to the GUID of the target list. I don't see anything else that could potentially point to the source list.
SharePoint Designer 2010 version: 14.0.7007.1000 SP2 14.0.7015.1000 I don't think this matters much because I've tried with other SP Designer 2010 versions and the error is the same.
thanks for your reply!

Hi alec,
When I create a custom EditForm1.aspx and set as default for a source list, then save this list as a template, then the newly created the target list based off this saved template, the source list still uses the custom EditForm1.aspx form as default
form, from SharePoint designer, I can see these two lists have different listID, so they have no connection when I edit any one of them.
Please recreate a new list with custom form page and save as template, then create a new list see if this issue could be reproduced, or we can create a new list instead if it is an isolate issue.
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support

Wht r the standard tables for vendor customer and sales order report/

Hi wht r the standard tables for vendor and customer reports and is how in normal we cannot use them for vendor reporting and etc ?

Hi
Customer is related to Sales Module
So for a customer we fetch the reports of Sales orders , Deliveries and Billing doc's
CUstomer and Vendor related tables with important fields:
KNA1: Customer Master-General(KUNNR,NAME1,LAND1)
KNB1: Customer Master(Company Code)(KUNNR,BUKRS,PERNR)
KNC1: Customer Master Data (Transaction Figures)(KUNNR,BUKRS,GJAHR)
KNVK: Customer Master Contact Partner(PARNR,KUNNR,NAME1)
KNVV: Customer Master sales data(KUNNR,VKORG,VTWEG,KDGRP)
KNBK: Customer Bank Details(KUNNR,BANKS,BANKL,BANKN)
KNVH: Customer Hierarchy (HITYP,KUNNR,VKORG,VTWEG,SPART)
KNVP: Customer Master Partner Functions(KUNNR,PARVW,KUNN2)
KNVS: Customer Shipment data(KUNNR,VSTEL,TRANS)
KNVI: Customer Tax data(KUNNR,ALAND,TATYP)
LFA1: Vendor Master-General (LIFNR,NAME1,ORT01)
LFB1: Vendor Master(Company Code)(LIFNR,BUKRS,PERNR)
LFC1: Vendor Master (Transaction Figures)(LIFNR,BUKRS,GJAHR)
Sales related Tables for a customer
VBAK: Sales Document(Header Data) (VBELN, KUNNR)
VBAP: Sales Document(Item Data) (VBELN,POSNR,MATNR,ARKTX,CHARG)
      Enquiry, Quotation, Sales Order are differentiated based on Doc.
      Type(VBTYP field) in VBAK,VBAP Tables( for Enquiry VBTYP = A,
      for Quotation 'B' & for Order it is 'C'.)
LIKP: Delivery Table (Header Data)(VBELN,LFART,KUNNR,WADAT,INCO1)
LIPS: Delivery Table (Item Data)(VBELN,POSNR,WERKS,LGORT,MATNR,VGBEL)
      (LIPS-VGBEL = VBAK-VBELN, LIPS-VGPOS = VBAP-POSNR)
VTTK: Shipment Table (Header Data)(TKNUM)
VTTP: Shipment Table (Item Data)( TKNUM,TPNUM,VBELN)
      (VTTP-VBELN = LIKP-VBELN)
VTFA: Shipping Document Flow(TKNUM,VBELV,VBELN)
VTPA: Shipping Partners data(VBELN,PARVW,KUNNR,PERNR)
VTTS: Stages in Shipment(TKNUM,TSNUM,TSTYP)
VTSP: Transport Stage/Shipment Item Allocation(TKNUM,TSNUM,TPNUM)
VEKP: Handling Unit: Header(Packing)(VENUM,VSTEL)
VEPO: Handling Unit: Item (Packing)(VENUM,VEPOS,VBELN)
VBRK: Billing Table(Header Data)(VBELN,FKART,BELNR)
VBRP: Billing Table(Item Data)(VBELN,POSNR,FKIMG,NETWR,VGBEL,VGPOS)
      (VBRP-AUBEL = VBAK-VBELN, VBRP-VGBEL = LIKP-VBELN)
      Apart from these tables there are lot of other tables which starts with
      V, but we use the following tables frequently.
VBUK: All Sales Documents status & Admn. Data(Header)(VBELN,VBTYP)
      VBTYP= C(Sales Order) VBTYP=J(Delivery) VBTYP=M(Invoice)
VBUP: Sales Documents status & Admn. Data(Item)(VBELN,POSNR)
VBEP: Sales Doc. Schedule Lines Data(VBELN,POSNR,EDATU,WMENG)
VBKD: To get sales related Business data like Payment terms etc.(VBELN,ZTERM)
VBFA: sales document flow data(VBELV,VBELN,POSNV,VBTYP)
VBPA: Partner functions Data(VBELN,PARVW,KUNNR,LIFNR)
VEDA: Contract Data(VBELN,VPOSN)
VEDAPO: Contract Data(VBELN,VPOSN)
Vendor related MM tables
EBAN-- Pur.Reqn. Data (BANFN,BNFPO,BADAT,MATNR)
EBKN-- Purchase Requisition Account Assignment(BANFN,BNFPO,VBELN)
EINA- Purchase Info.Record (General Data)(INFNR,MATNR,LIFNR)
EINE-- Purchase Info.Record (Pur.Orgn Data )(INFNR,EKORG)
ELBK-- Vendor Evaluation Header Data(LIFNR,EKORG,KLASS)
EKKO-- Purchase Order Data (Header)(EBELN,BSTYP,BSART)
EKPO-- Purchase Order Data (Item)(EBELN,EBELP,MATNR)
       RFQ and PO are differentiated by Doc Type(BSTYP)in EKKO table.
       For RFQ it is A and for PO it is F.
MKPF-- GRN Data (Header) (EBELN,BLDAT,BUDAT,XBLNR,BKTXT)
MSEG-- GRN Data (Item)(MBLNR,BWART,LIFNR,MATNR,EBELN)
       Apart from this there are lot of tables which begin with 'M'& 'E', but we
       use the following very often.
EKBE--PO History Data (EBELN,EBELP,BELNR,BLDAT,MATNR,VGABE)
EKBZ--PO History with delivery Costs(EBELN,BELNR,LIFNR,XBLNR)
EKET--Schedule lines data of a PO (EBELN,EINDT,SLFDT)
EKES--Vendor Confirmations Data(EBELN,EBTYP,EINDT,XBLNR)
Reward points if useful
Regards
Anji

Listing and customer orders

Similar Messages

Maybe you are looking for