LO Extraction 2LIS_02_ITM Problem

Hi guys,
Me again. I tried using V3 updating to extract data for business content cube 0PUR_C01. I also installed only one of the 4 update rules (the one that uses 2LIS_02_ITM as its datasource) for this cube.
Everything went fine, up to the point wherein i was supposed to perform the [Delete set-up tables / perform extraction] part of the process.
This is what the procedure i used (please tell me if i did something wrong):
1. Maintained extract structure for 2LIS_02_ITM (LBWE)
2. transfered datasource 2LIS_02_ITM using tcode RSA5
3. Checked transfer in RSA6
4. Maintained datasource 2LIS_02_ITM in LBWE
5. replicated datasource in BW
6. installed business content cube 0PUR_C01 with all dependent InfoObjects but with only 1 update rule (the one that uses 2LIS_02_ITM as its datasource).
7. Assigned infosource 2LIS_02_ITM to datasource 2LIS_02_ITM
8. chacked activated business content cube 0PUR_C01 and update rules. (although not all key figures where activated, some of them, those without attached routines from the business content, did not have assigned key figures.
9. Activated datasource in LBWE
10. set parameters for job control in LBWE
11. Chose V3 serialized update as the update mode in LBWE
12. Created an infopackage for datasource and infosource 2LIS_02_ITM.
13. Started scheduling.
An error in the monitoring came up. It said that:
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Therefor, no data could be seen in the infocube. Please do help me! I don't know what i did wrong.
In need of help,
Peter

Roberto Negro,
While filling setup table by using T-code OLI3BW (Purchasing) it is taking very long time.
Please let me is there any way to rerduce this time.
We are at BW 7.3 version.
Regards,

Similar Messages

Extraction Pack Problem in Integration of DataStage 7.5.1 with BI 7.0

Hi,
I am facing problem in loading data using DataStage Extraction Pack. I am using DataStage version 7.5.1A and BW pack 4.2.1. The Load Pack is working fine.
In Extraction Pack properties, The InfoSpoke "xxxxxxxx" is appearing in the search, while trying to select the InfoSpoke the system is showing 'The InfoSpoke "xxxxxxxx" was not found'.
Can you please help me in over coming the issue. Any input is much appreciated.
Thanks in advance,
Kindest Regards
Surya.

Hello,
But the problem is that when I close the terminal all connection are lost and given error "The requested URL could not be retrieved" That's not very surprising, as APEX Listener is running in Standalone Mode in your current scenario. If you close the terminal session that the JVM is running in you kill the JVM and hence APEX Listener.
You could use a tool like "nohup" to detach the process you start from your terminal session. But using the Standalone Mode for a (long running) production scenario is not recommended anyway, and...
I want to configure listener with EBS .When I start instance automatic start apex listener... obviously not your actual aim.
So, EBS shall be your target. Shoudn't be a huge problem, as EBS comes with an OC4J Container and OC4J is one of the Containers officially supported by APEX Listener. I'm not sure if your EBS already ships with the JDK version needed, but as soon as it runs at least 1.6.0_20 it should work.
As I've already replied to your question in {thread:id=1118604} there is a working approach described in {message:id=10069317}.
Did you try that one? If so and it didn't work out, could you please describe the problems you've encountered?
Thanks,
Udo

No purchasing date in delta extraction (2LIS_02_ITM, 2LIS_02_SCL)

Hi.
We have been experiencing some issues with delta extraction of purchasing data, using 2LIS_02_ITM and 2LIS_02_ITM.
In particular, the posting date's field (BUDAT) is not always filled: for example, I noticed that when users set the final delivery flag even if the purchase delivered quantity does not correspond to the whole order's quantity or the flag has been set later than the change of the delivery date, the field (BUDAT) in the delta queue is not filled.
By this way, the field may be overwritten: however, we need to keep the posting date value.
I am wondering whether I am correct and, in this case, it is possible to keep that value: however, it seems that the only way is to use a full extraction of data.
Thanks a lot

Roberto Negro,
While filling setup table by using T-code OLI3BW (Purchasing) it is taking very long time.
Please let me is there any way to rerduce this time.
We are at BW 7.3 version.
Regards,

Extract Audio Problems

I am having a frustrating problem with iMovie. I am trying to make a video with sound playing over still images, bu every time i try to extract audio from the video i have, it will not work. It loads, taking 7-12 minutes, and then when i substitute the video clip for the photo, the sound does not show up. Why is this happening? The video footage, by the way, was shot with the built in iSight.

I'm not quite certain, from your description, of exactly what you're trying to do..
If you want to insert still photos in place of some of your video, first do what Bengt suggests, in order to extract all the audio from your video, which will put the audio in the Audio Track underneath the video.
Then, if you want to insert a photo which is in your 'Clips Pane' within the "media" section on the right-hand side, do the following:
(a) Choose the photo from your Library, and you can choose whether to tick the 'Ken Burns' box or not (..ticking it will apply a "zoom" effect to your photo..) then click the 'Apply' button. That generally adds your photo to the end of your movie.
(b) With the photo still Selected (..i.e; it has a blue highlight over it..) hold down the Apple key and press 'C' to Copy the photo.
(c) Position your Playhead where you want the photo to be inserted, and on the top-line menu choose 'Advanced' and 'Paste Over at Playhead' ..or just hold down the Shift and Apple keys and jab 'V' to Insert.
The photo will now be inserted to replace the same duration of the original material in your video track, and the original, extracted, audio will be preserved.
If - on the other hand - you're trying to insert some video to replace a photo, just do the same steps, but Copy, position the Playhead, and then 'Paste Over' the video clip to replace the previous photo.
Using those steps, the amount of original material which is cut out, to be replaced by the new material, is automatically calculated by iMovie, and you don't have to worry about making sure that you've chopped out exactly the right amount to match whatever you're replacing it with.
The audio, benath in the Audio Track, should be entirely unaffected.
NOTE, though ..that if you then apply any transitions [except 'Overlap'] between the original material and the newly-inserted shots - this applies to adding transitions in any circumstances - then the entire video track will be shortened by the same duration as the duration of the transition(s), so if you're trying to keep the picture synchronised to the audio, then, er, sorry, but it'll drift out of sync!

2LIS_02_ITM problems with 0deliveries

Hi friends!
I'm having problems with 2LIS_02_ITM specifically with cancellations of goods receipts.
If there where a goods receipt canceled I get a record for the GR and a record for the cancellation but the last one doesn´t delivers negative values so the total quantities are wrong.
In the other hand, If I run that datasource for a document with just an item and a good receipt I get more than one record, some of them with 0REVERSEDOC = X and we can´t understand why if there is no cancellation
It's a bit difficult to explain but I hope some of you had work with this source and had the same problem.
In case it´s useful if you check query 0PUR_C01_Q01 you will get wrong values for 0DELIVERIES if the purchase order in the cube has a cancellation.
I hope you understand!
Thnaks a lot!

Hi! me again...
may be this helps, see note 381267
we are on that scenario and we must get reversals and returns to discount 0DELIVERIES
for example
1. Goods receipt: ALIEF: 1
2. Reversal GR: ALIEF: 0
3. Goods receipt: ALIEF: 1
but also we need to decrease received quantity. One main problem is that there is no data available on 2LIS_02_ITM indicating that certain record means a reversal or a cancelation record. If it were the case we could reverse values "by hand"...but not.
Please some advice!
Thanks really thanks!!!
Best regards.

BW GENERIC EXTRACTION DELTA PROBLEM

I have a problem for extracting delta from R/3 to BW.
Init data is loaded from R/3 to BW system for ZST_ORDER datasource.
Repair full request and selection parameter is created on date August 1st 2007 to August15th 2007.
During the delta extraction - A lot of records around 500,000 records are getting extracting from R/3 to BW.
R/3 side - There is only 5 entries available in AUFK table.
It should extract delta only less than 35 entries.
ZST_ORDER is generic datasource . Delta captured field is DATUM -New status changed record value 2.
Advance Thx for your help. The code looks like
FUNCTION ZST_ORDER.
""Local Interface:
*" IMPORTING
*" REFERENCE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" REFERENCE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" REFERENCE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE DEFAULT 1000
*" REFERENCE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" REFERENCE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE ZST_ORDEROPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER
TABLES: AUFK, "Order master data
TJ02T, "System status texts
TJ30T, "Texts for user status
JSTO. "Status object information
DATA DECLARATION
DATA: L_DATE TYPE DATS,
L_STATUS TYPE J_STATUS,
L_LINES TYPE SY-TABIX,
L_CHANGED(1) TYPE C.
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
Another data objects
Service Order Data
DATA: BEGIN OF LT_AUFK OCCURS 0,
AUFNR LIKE AUFK-AUFNR,
AUART LIKE AUFK-AUART,
ERDAT LIKE AUFK-ERDAT,
AEDAT LIKE AUFK-AEDAT,
STDAT LIKE AUFK-STDAT,
AEZEIT LIKE AUFK-AEZEIT,
ERFZEIT LIKE AUFK-ERFZEIT,
IDAT1 LIKE AUFK-IDAT1,
IDAT2 LIKE AUFK-IDAT2,
IDAT3 LIKE AUFK-IDAT3,
LOEKZ LIKE AUFK-LOEKZ,
OBJNR LIKE AUFK-OBJNR,
END OF LT_AUFK.
Individual Object Status
DATA: BEGIN OF LT_JEST OCCURS 0,
OBJNR LIKE JEST-OBJNR,
STAT LIKE JEST-STAT,
INACT LIKE JEST-INACT,
CHGNR LIKE JEST-CHGNR,
END OF LT_JEST.
***Change Documents for System/User Statuses (Table JEST)
DATA: BEGIN OF LT_JCDS OCCURS 0,
OBJNR LIKE JCDS-OBJNR,
STAT LIKE JCDS-STAT,
CHGNR LIKE JCDS-CHGNR,
USNAM LIKE JCDS-USNAM,
UDATE LIKE JCDS-UDATE,
UTIME LIKE JCDS-UTIME,
INACT LIKE JCDS-INACT,
CHIND LIKE JCDS-CHIND,
END OF LT_JCDS.
DATA: BEGIN OF LT_JSTO OCCURS 0,
OBJNR LIKE JSTO-OBJNR,
STSMA LIKE JSTO-STSMA,
END OF LT_JSTO.
STATIC FIELDS
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
S_COUNTER_DATAPAKID LIKE SY-TABIX,
cursor
S_CURSOR TYPE CURSOR.
User-defined Ranges
RANGES: L_R_AUFNR FOR AUFK-AUFNR ,
L_R_ERDAT FOR AUFK-ERDAT.
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Check DataSource validity
CASE I_DSOURCE.
WHEN 'ZST_ORDER '.
WHEN OTHERS.
RAISE ERROR_PASSED_TO_MESS_HANDLER.
ENDCASE.
Copy selection criteria for future extractor calls (fetch-calls)
APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
S_S_IF-REQUNR = I_REQUNR.
S_S_IF-DSOURCE = I_DSOURCE.
S_S_IF-MAXSIZE = I_MAXSIZE.
S_S_IF-INITFLAG = I_INITFLAG.
APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.
First data package -> OPEN CURSOR
IF S_COUNTER_DATAPAKID = 0.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT
WHERE FIELDNM = 'AUFNR'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_AUFNR.
APPEND L_R_AUFNR.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT
WHERE FIELDNM = 'ERDAT'.
MOVE-CORRESPONDING L_S_SELECT TO L_R_ERDAT.
APPEND L_R_ERDAT.
ENDLOOP.
LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT
WHERE FIELDNM = 'DATUM'.
L_DATE = L_S_SELECT-LOW.
ENDLOOP.
OPEN CURSOR WITH HOLD S_CURSOR FOR
SELECT AUFNR AUART ERDAT
AEDAT OBJNR AEZEIT
STDAT ERFZEIT IDAT1
IDAT2 IDAT3 LOEKZ
FROM AUFK
WHERE AUFNR IN L_R_AUFNR AND
ERDAT IN L_R_ERDAT.
ENDIF.
Fetch records into interface table LT_AUFK
FETCH NEXT CURSOR S_CURSOR
APPENDING CORRESPONDING FIELDS OF TABLE LT_AUFK
PACKAGE SIZE S_S_IF-MAXSIZE.
IF SY-SUBRC <> 0.
CLOSE CURSOR S_CURSOR.
RAISE NO_MORE_DATA.
ENDIF.
Determining the number of lines of the table LT_AUFK .
L_LINES = LINES( LT_AUFK ).
IF L_LINES IS NOT INITIAL.
Sort the internal table LT_AUFK
SORT LT_AUFK BY OBJNR ASCENDING.
Selecting the records from JCDS depending upon the entries in LT_AUFK.
SELECT OBJNR STAT CHGNR USNAM
UDATE UTIME INACT CHIND
INTO TABLE LT_JCDS
FROM JCDS
FOR ALL ENTRIES IN LT_AUFK
WHERE OBJNR EQ LT_AUFK-OBJNR
AND ( CHGNR EQ '001'
OR UDATE >= L_DATE ).
Sort the internal table lt_jcds.
SORT LT_JCDS BY OBJNR STAT CHGNR ASCENDING.
Select records from table JEST depending upon the entries in LT_AUFK.
SELECT OBJNR STAT INACT CHGNR
INTO TABLE LT_JEST
FROM JEST
FOR ALL ENTRIES IN LT_AUFK
WHERE OBJNR = LT_AUFK-OBJNR.
SELECT OBJNR STSMA
INTO TABLE LT_JSTO
FROM JSTO
FOR ALL ENTRIES IN LT_AUFK
WHERE OBJNR = LT_AUFK-OBJNR.
SORT LT_JSTO BY OBJNR.
ENDIF.
LOOP AT LT_JEST.
CLEAR: LT_AUFK,
l_changed.
CLEAR L_CHANGED.
CLEAR LT_JSTO.
READ TABLE LT_JSTO WITH KEY OBJNR = LT_JEST-OBJNR BINARY SEARCH.
IF SY-SUBRC EQ 0.
E_T_DATA-STSMA = LT_JSTO-STSMA.
ENDIF.
*End**
Read the data from LT_AUFK.
READ TABLE LT_AUFK WITH KEY OBJNR = LT_JEST-OBJNR BINARY SEARCH.
E_T_DATA-AUFNR = LT_AUFK-AUFNR.
E_T_DATA-AUART = LT_AUFK-AUART.
E_T_DATA-ERDAT = LT_AUFK-ERDAT.
E_T_DATA-AEDAT = LT_AUFK-AEDAT.
E_T_DATA-AEZEIT = LT_AUFK-AEZEIT.
E_T_DATA-ERFZEIT = LT_AUFK-ERFZEIT.
E_T_DATA-IDAT1 = LT_AUFK-IDAT1.
E_T_DATA-IDAT2 = LT_AUFK-IDAT2.
E_T_DATA-IDAT3 = LT_AUFK-IDAT3.
E_T_DATA-LOEKZ = LT_AUFK-LOEKZ.
E_T_DATA-INACT = LT_JEST-INACT.
E_T_DATA-CHGNR = LT_JCDS-CHGNR.
e_t_data-datum = lt_aufk-erdat.
READ TABLE LT_JCDS WITH KEY OBJNR = LT_JEST-OBJNR
STAT = LT_JEST-STAT
CHGNR = '001'
BINARY SEARCH.
IF SY-SUBRC EQ 0.
E_T_DATA-UDATE = LT_JCDS-UDATE.
E_T_DATA-AEDAT = LT_JCDS-UDATE.
E_T_DATA-UTIME = LT_JCDS-UTIME.
E_T_DATA-AEZEIT = LT_JCDS-UTIME.
E_T_DATA-CHIND = LT_JCDS-CHIND.
E_T_DATA-USNAM = LT_JCDS-USNAM.
e_t_data-chgnr = lt_jcds-chgnr.
IF LT_JCDS-UDATE GE L_DATE
AND L_DATE IS NOT INITIAL.
L_CHANGED = 'X'.
ENDIF.
IF LT_JEST-CHGNR NE '001'.
CLEAR LT_JCDS.
READ TABLE LT_JCDS WITH KEY OBJNR = LT_JEST-OBJNR
STAT = LT_JEST-STAT
CHGNR = LT_JEST-CHGNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
L_CHANGED = 'X'.
E_T_DATA-AEDAT = LT_JCDS-UDATE.
E_T_DATA-AEZEIT = LT_JCDS-UTIME.
E_T_DATA-CHIND = LT_JCDS-CHIND.
E_T_DATA-USNAM = LT_JCDS-USNAM.
e_t_data-chgnr = lt_jcds-chgnr.
ENDIF.
ENDIF.
IF LT_JEST-STAT(1) EQ 'I'.
E_T_DATA-ISTAT = LT_JEST-STAT.
ELSEIF LT_JEST-STAT(1) EQ 'E'.
E_T_DATA-ESTAT = LT_JEST-STAT.
ENDIF.
IF L_CHANGED EQ 'X'
AND L_DATE IS NOT INITIAL.
APPEND E_T_DATA.
ELSEIF L_DATE IS INITIAL.
APPEND E_T_DATA.
ENDIF.
ENDIF.
CLEAR: LT_AUFK,
E_T_DATA.
ENDLOOP.
CLEAR LT_JEST.
REFRESH LT_JEST.
next data package
S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF. "Initialization mode or data extraction ?
ENDFUNCTION.

hi,
for that quantity SALK3 is referring a different table in the reference field for your table fields. check that field and refer the correct table for that field in table view.
table join has a problem in that. i think your joined some other table with that field. replace the field assignment or create a new view.
hope this help you
regards
harikrishna N

Slo-Mo Extracted Audio Problem

Hey all. Thanx for reading. My problem is such - I'm running a forty minute flick in iMovie 4.0.1. The other laptop I'm working on is a 1.33 GHz PowerPC G4 (10.2.7). Now, a few of the clips I have I've put in slow motion. Because the movie is so long, I have to extract the audio from the whole thing or else the sound immediatly lags when I burn to a DVD. However, wherever the clip is slowed down, the audio sounds like those parts in The Matrix when they are getting sucked through the telephone - all choppy and digitized. I'm out of ideas. I tried saving the audio clip and slowing it down - nothing. I've tried extracting the audio before I slow it down - can't slow it down by itself. Even when I put it on this laptop and my sister's "dome" mac, (don't know the proper name,lol) it does the same thing. Please, anyone, help. TIA! Matt.

Well, the back and forth using the camera worked - but it was a lot of labor. First I erased the two hundred or so other clips other than the five I wanted to work with. UN-extracted the audio, with the clips still in Slow Motion, and exported to the camera (which functioned, luckily). Quit iMovie, did not save the changes, and opened her back up, and re-imported the clips. Worked like a charm. Just like you said, it tricked iMovie into thinking the slow motion clip was just how the regular clip played. Stupid computer, haha.
Lastly, just to clear it up. I was attempting to slow the clip AND the audio down the same, so, for instance, like when someone yells "Noooooo," it makes the voice deeper and longer. It's funny. But when I would extract the audio from the clip, it would go all Matrix and funky on me. No big deal anymore.
And what the heck are you doing up at 4:45 in the morning? lol. Anyway, thanx for your input and time - I really appreciate it. All seems well. Thanks again, Matt.

Extracted Audio Problem

Hello, I'm having a problem with my current project in iMovieHD. I learned through bitter experience that it was a good idea to extract/lock my audio back when I was using iMovie 4. Since using iMovieHD I have continued this practice, even though people tell me the shifting audio problem is no longer an issue. Anyway, today I extracted & locked the audio before I burned the DVD, and I find that the audio has been corrupted. It just makes random popping noises. When I put it in "View Waveform" mode, I can clearly see that the audio is still there. It just won't play now. Any suggestions as to what I can do to fix this problem. I can't go back to unextracting the audio now - too late for that. HELP!

Well, the back and forth using the camera worked - but it was a lot of labor. First I erased the two hundred or so other clips other than the five I wanted to work with. UN-extracted the audio, with the clips still in Slow Motion, and exported to the camera (which functioned, luckily). Quit iMovie, did not save the changes, and opened her back up, and re-imported the clips. Worked like a charm. Just like you said, it tricked iMovie into thinking the slow motion clip was just how the regular clip played. Stupid computer, haha.
Lastly, just to clear it up. I was attempting to slow the clip AND the audio down the same, so, for instance, like when someone yells "Noooooo," it makes the voice deeper and longer. It's funny. But when I would extract the audio from the clip, it would go all Matrix and funky on me. No big deal anymore.
And what the heck are you doing up at 4:45 in the morning? lol. Anyway, thanx for your input and time - I really appreciate it. All seems well. Thanks again, Matt.

Delta reocrds are not getting extracted . Problem with delta Quaue

Hello friends .
Could you please help me in this scenario ?
Its related to delta load from application 12 , - 2LIS_12_VCITM.
Some how data is not getting transferred from LBWQ to RSA7 . There are more than 200000 entries in LBWQ , but the job is not able to transfer any entries to RSA7.
For rest other application , data is going correctly .
The job status showing is correct , like XXXXX LUW are transferred there is no error in Job log , it technically correct .
I have found one notes , in SAP service market place , but still it doesnt match with my job status . My job status is NOTESID ..where as per the notes it should WKEDPI*** ( something like this ) .
I have taken below steps to solve this problem but still it doesnt work .
1.     Removed job from schedule ( the job for LBWQ to RSA7 ) and Executed the job manually .
2.     Executed Program RMSBW12.
3.     Deleted the Delta Q from RSA for application 12 and regenerated the same once again by running the infopackage , early delta initialization with out data transfer , . Once Delta Q is generated , run the job once again .
I hope , I tried with all correct way ..but still I could not able to transfer the data .
But with all above steps , still data is not transferred . Daily infopackage is running as per the schedule , and bringing only 0 record . If it still doesnt work then I have to do Re-initilization . and this is big cost for us . as we have to lock the sys for users and so on .
Could you please give me some tips , that how can I transferr the data from LBWQ to delta Q ( RSA7) . If it works then definitely , I will save my lot of time .
Please suggest me , how can I proceed . Please save me from this situation.
Many many thanks in advance.
Regards,

Hi Akshay,
Go to SMQ1 and check MCEX12 Queue. If your delta records are piling up in SMQ1 and not being transfered to RSA7, you need to check your back gound job control option once again.
The back ground collector job will collect the recrords from SMQ1 and push to RSA7.
Try to execute RMBWV312 program in SE38 and manully push all the recrods to RSA7. Once all the records are available in RSA7 you will find the MCEX12 queue will be cleared in SMQ1.
Cheers
Praveen

Extracting dates problem

customer table
===========
customer_id varchar2(6)
st_dt date
ed_dt date
dop varchar2(7)
data
===
customer_id st_dt ed_dt dop
429100 2005/02/23 2006/03/20 0000007
customer1 table
============
customer_id varchar2(6)
st_dt date
ed_dt date
dop varchar2(7)
dt date
insert into customer1(customer_id, st_dt, ed_dt, dop, dt)
select a.customer_id, a.st_dt, a.ed_dt, a.dop, a.st_dt+b.tita
from customer a, (select rownum-1 tita from user_objects) b
where a.st_dt+b.tita <= a.ed_dt
and instr(a.dop, decode(to_char(a.st_dt+b.tita, 'd')-1,0,7,to_char(
a.st_dt+b.tita,'d')-1))>0
order by a.customer_id,a.st_dt+b.tita
The purpose of thie query is to extract all the dates in the customer table st_dt to ed_dt fields based on the field dop, 0000007 indicates Sunday, if the value is 1004007, it indicates monday, thursday and sunday. The results will insert into customer1 table, however the results are different if I execute the same query on different machine, they both run on oracle 10g database.
If i change st_dt to 2005/02/23 and ed_dt to 2005/03/20, it returns the right result, it seems that the ed_dt doesn't work if I change the year to 2006.
what's wrong with this query ? or is there something to do with the date settings in my database ?
thanks.

(select rownum-1 tita from user_objects) bInteresting way of creating a counter :)
Anyways, I guess you should not pick a date range that span more days than you have objects in your schema. You can possibly extend the range by selecting from all_objects instead :-)))))

Extracting Audio Problem

I have a video in .mpg format that I want to extract the audio from to listen to on my iPod.
However, the option to extract the audio isn't available for this file, so I tried converting it to a different video file first.
But when I convert it to a different video file, the audio goes missing.
Any help?
I have the newest version of QT, v7.1.5

QT will not export the sound from mpegs, as this Apple article details:
QT Mpeg Limitations
There is a freeware that will export both sound and video from mpg to various Quicktime formats:
Mpeg StreamClip</A

OBIU Extract Multithread problem.

We have come across a problem in our ETL. Some batch programs when multi-threaded, such as C1-RECTD, produce duplicate files. Does anyone know which of base batch programs have this problem ? Thank you.

We have come across a problem in our ETL. Some batch programs when multi-threaded, such as C1-RECTD, produce duplicate files. Does anyone know which of base batch programs have this problem ? Thank you.

Extract structure problem

Hi - The standard 2LIS_11_VAITM infosource has two fields (0RECORDMODE & 0LOGSYS) which I am unable to map to any fields in the 2LIS_11_VAITM datasource. Can someone please tell me what are the possible mapping values for these or how should we go about mapping for these fields ?
Thanks.

Hi,
For 0RECORDMODE I think no need to map, it tells us that it supports the delta methods based on the record modes..
0LOGSYS it is nothin but client number for this also no need to map if ur system is over 3.0b version other wise u have to maintain the mapping...
Regards
Siddhu

In Which R/3 Table, the Extraction Date should be RESET to Limit DELTA ???

Hi all,
We have a daily delta extraction setup for DataSource 0FI_GL_4 from R/3 into ODS. I think there is a table on R/3 side where we could RESET the extraction date (?) to limit the delta reload incase something goes wrong with delta process. Without this reset, it may take 2-3 WEEKS for us.
Is any one has any idea about this table , PLEASE....
Thanks.

hi Venkat,
check oss note 485958-BW-BCT-FI: Repeating delta extractions
Symptom
This note provides the option of repeating delta extractions under certain conditions.
The note is valid for the DataSources listed below:
0FI_AP_4 - Accounts Payable: Line Items
0FI_AR_4 - Accounts Receivable: Line Items
0FI_GL_4 - General Ledger: Line Items
0FI_TX_4 Taxes: Line Items
0FI_AP_6 Accounts Payable: Transaction Figures Using Delta Extraction
0FI_AR_6 Accounts Receivable: Transaction Figures Using Delta Extraction
0FI_GL_6 - General Ledger: Transaction Figures Using Delta Extraction
0FI_AP_7 - Accounts Payable: Special G/L Transaction Figures Using Delta Extraction
0FI_AR_7 - Accounts Receivable: Special G/L Transaction Figures Using Delta Extraction
0FI_GL_7 - General Ledger: Cost of Sales Accounting Ledger Using Delta Extraction
0FI_AR_8 - Accounts Receivable: Credit Management: Central Data Using Delta Extraction
0FI_AR_9 - Accounts Receivable: Credit Management: Control Area Data Using Delta Extraction
0FI_AR_10 - Accounts Receivable: Payment History Using Delta Extraction
Other terms
BWOM2_TIMEST, TIMESTAMP, BWOM_SETTINGS, LAST_TS, delta, init
Reason and Prerequisites
For test or correction purposes you require a function to repeat delta extractions.
In the standard system, you can repeat the delta extractions for the last sixty days.
The number of days is defined by the 'DELTIMEST' parameter in the BWOM_SETTINGS table.
For all DataSources mentioned above you can repeat the delta extraction without problems because all DataSources use an ODS object. The system automatically filters out data that is selected several times.
Solution
The solution consists of resetting the time stamps used for the delta extraction in the BWOM2_TIMEST table to a certain date.
To do this, you must reset the 'X' marker in the 'LAST_TS' column for the last successful delta extraction.
The next delta extraction then loads all data created or changed as of this date to the BW system.
To reset the 'X' marker in the 'LAST_TS' column, use the 'BWOM2_TIMEST' report. If the report is not yet available in you system, you can install it as described in Note 836288.
Caution - important note
If you repeat several delta extractions in a run using this note, the number of the extracted records will in most cases be smaller than the total of the individual delta extractions.
This can happen in the following cases:
If documents are contained in several individual delta extractions due to document changes. The system selects these documents only once.
If you have set parameter BWFIOVERLA = X in the BWOM_SETTINGS table. (See Note 485958)
In this case, the upper limit of the period for the data selection is not, as usual, 23:59:59 of the previous day. The system also extracts all existing documents of the current day. These documents are also contained in the following delta extraction.
1. If you can load the expected data volume in one delta extraction, proceed as follows:
Execute the 'BWOM2_TIMEST' report for the relevant DataSource.
Remove the marker in the entry of the last delta extraction.
In the columns for the date of the time stamp and the time of the time stamp, you can see up to when the individual data extractions have extracted data.
Select the entry up to which the data in your BW system is still correct.
Save the changes.
Do not make any further changes in the BWOM2_TIMEST table.
              The next delta extraction uses the date + 1 of the selected entry as a lower limit for the data selection and the current date - 1 for the upper limit.
2. If you must load the expected data volume in several parts, proceed as follows:
Caution: There are the following two cases:.
a) The 'BWFIOVERLA' parameter in the BWOM_SETTINGS table is not set.
           Execute the 'BWOM2_TIMEST' report for the relevant DataSource.
           Remove the marker in the entry of the last delta extraction.
           In the columns for the date of the time stamp and the time of the time stamp, you can see up to when the individual data extractions have extracted data.
Select the entry up to which the data in your BW system is still correct.
           Save the changes.
Do not make any further changes in the BWOM2_TIMEST table.
               The next delta extraction uses the date + 1 of the selected entry as a lower limit for the data selection.
You can control the upper limit for the data selection by changing the ' BWFISAFETY' parameter in the BWOM_SETTINGS table. The upper limit is determined using the current date minus the value of the 'BWFISAFETY' parameter (default = 1).
If you want to extract the data of the last twenty days in four parts, for example, set the parameter as follows in Transaction SE16:
before the 1. delta extraction > > BWFISAFETY = 15
before the 2. delta extraction > > BWFISAFETY = 10
before the 3. delta extraction > > BWFISAFETY = 5
before the 4. delta extraction > > BWFISAFETY = 1 (= default)
b) The 'BWFIOVERLA' parameter in the BWOM_SETTINGS table is set (=X).
           First, deactivate the 'BWFIOVERLA' parameter in the BWOM_SETTINGS table. This is necessary because if you do not do this, the system ignores the settings of the 'BWFISAFETY' parameter.
           Execute the 'BWOM2_TIMEST' report for the relevant DataSource.
           Remove the marker in the entry of the last delta extraction.
           In the columns for the date of the time stamp and the time of the time stamp you can see up to when the individual data extractions have extracted data.
Do NOT select the entry up to which the data in your BW system is still correct, rather select the entry before that.
           Save the changes.
Do not make any further changes in the BWOM2_TIMEST table.
               The next delta extraction uses the date + 1 of the selected entry as a lower limit for the data selection.
You can control the upper limit for the data selection by changing the ' BWFISAFETY' parameter in the BWOM_SETTINGS table. The upper limit is determined using the current date minus the value of the 'BWFISAFETY' parameter (default = 1).
If for example you want to extract the data of the last twenty days in four parts, set the parameter in Transaction SE16 as follows:
before the 1. delta extraction > > BWFISAFETY = 15
before the 2. delta extraction > > BWFISAFETY = 10
before the 3. delta extraction > > BWFISAFETY = 5
before the 4. delta extraction > > BWFISAFETY = 1 (= default)
                and parameter BWFIOVERLA = X to return to the originaldelta mode.

Error on extracting process: 'SDMKIT.JAR. The file is corrupt'

Hi,
I have both files (NW04SneakPrevJavaSP11.part1.rar and NW04SneakPrevJavaSP11.part2.rar) in the same directory but when I start the extracting process I got those messages:
D:\SAP_portal\NW04SneakPrevJavaSP11.part1.rar:
Unexpected end of archive
D:\SAP_portal\NW04SneakPrevJavaSP11.part1.rar:
CRC failed in NW04SneakPrevJavaSP11\NWSneakPreviewSP11\SneakPreviewContent\SDM\SDMKIT.JAR. The file is corrupt
D:\SAP_portal\NW04SneakPrevJavaSP11.part1.rar:
Cannot create NW04SneakPrevJavaSP11\DeveloperStudioSP11\J2EE-
RUNT-CD\IDE\eclipse\plugins\com.sap.tc.ap\comp\CAF\DCs\sap.com\caf\runtime\connectivity\impl\_comp\gen\default\public\com.sap.caf.mp.core.svc\90549cee3a85b8105ec24698da254123.HASH
Total path and file name length must not exceed 260 characters
I wonder to know what happend and how can I fix it.
Appreciate your help,
Luis.

Hi Luis,
I dont't know about a mirror. I downloaded the files and extract without problems.
In the following thread is an instruction how to uncompress:
How can I extract files of kind .rar?
Do you use Winrar? Do you select both files if you extract? Try to rename the directory SAP_portal to NW4 (or an other very short name)
Hope that helps!
Best regards
Renald

LO Extraction 2LIS_02_ITM Problem

Similar Messages

Maybe you are looking for