Load sharing in IOS XR

Hi all,
How can I change the CEF load balancing method to per-packet in IOS XR 4.0.1 (12000GSR)
Thanks,
Arun Mohan

Hi,
you can use below command to acheive load balancing across equal cost links.
cef load-balancing fields L3/L4 ###L3 is default

Similar Messages

Preference Error: Could not load sharing preference pane

For some reason my second computer (iMac 27) is no longer showing up on the left pane of any finder window on my MBP. The iMac is running Yosemite and the MBP is running Mavericks. So I open System preferences to see if there is a problem with "Sharing" on the MBP. I'm getting a Preference Error: Could not load sharing preference pane. Do I need to install the update to fix this? I'm not ready to commit to Yosemite completely. I build apps for iOS and Mac and really need to test in both OS environments.

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.systempreferences.plist. Move the .plist to your desktop.
Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

MP-BGP and MPLS multipath load sharing

Hi,
I am trying to PoC MPLS multi path load sharing by using per-PE-per-VRF RDs in the network.
I have a simple lab setup with AS65000 which consists of SITE1 PE1&PE2 routers (10.250.0.101 and 10.250.0.102), route reflector RR in the middle (10.250.0.55) and SITE2 PE1&PE2 routers (10.250.0.201 and 10.250.0.202). PE routers only do iBGP peering with centralized route reflector and passing route to 10.1.1.0/24 prefix (learned from single CE router) with 100:1 and 100:2 RDs for specific VRF.
Route reflector gets routes with multiple RDs, makes copies of these routes in order to make local comparison to RD 55:55 configured, uses these routes and install multiple paths into its routing table (all PE routers and RR have "maximum-paths eibgp 4" configured):
RR#sh ip bgp vpnv4 all
BGP table version is 7, local router ID is 10.250.0.55
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
   Network          Next Hop            Metric LocPrf Weight Path
Route Distinguisher: 55:55 (default for vrf VRF-A) VRF Router ID 10.250.0.55
* i10.1.1.0/24      10.250.0.102             0    100      0 65001 i
*>i                 10.250.0.101             0    100      0 65001 i
Route Distinguisher: 100:1
*>i10.1.1.0/24      10.250.0.101             0    100      0 65001 i
Route Distinguisher: 100:2
*>i10.1.1.0/24      10.250.0.102             0    100      0 65001 i
RR#sh ip route vrf VRF-A
<output omitted>
     10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
B       10.1.1.0/24 [200/0] via 10.250.0.102, 00:45:52
                          [200/0] via 10.250.0.101, 00:46:22
BUT, for some reason RR doest reflects routes with multiple RDs down to SITE2 PE1&PE2 - its own clients:
RR#sh ip bgp vpnv4 all neighbors 10.250.0.201 advertised-routes
Total number of prefixes 0
RR#sh ip bgp vpnv4 all neighbors 10.250.0.202 advertised-routes
Total number of prefixes 0
Here comes RR BGP configuration:
router bgp 65000
no synchronization
bgp router-id 10.250.0.55
bgp cluster-id 1.1.1.1
bgp log-neighbor-changes
neighbor 10.250.0.101 remote-as 65000
neighbor 10.250.0.101 update-source Loopback0
neighbor 10.250.0.101 route-reflector-client
neighbor 10.250.0.101 soft-reconfiguration inbound
neighbor 10.250.0.102 remote-as 65000
neighbor 10.250.0.102 update-source Loopback0
neighbor 10.250.0.102 route-reflector-client
neighbor 10.250.0.102 soft-reconfiguration inbound
neighbor 10.250.0.201 remote-as 65000
neighbor 10.250.0.201 update-source Loopback0
neighbor 10.250.0.201 route-reflector-client
neighbor 10.250.0.201 soft-reconfiguration inbound
neighbor 10.250.0.202 remote-as 65000
neighbor 10.250.0.202 update-source Loopback0
neighbor 10.250.0.202 route-reflector-client
neighbor 10.250.0.202 soft-reconfiguration inbound
no auto-summary
address-family vpnv4
neighbor 10.250.0.101 activate
neighbor 10.250.0.101 send-community both
neighbor 10.250.0.102 activate
neighbor 10.250.0.102 send-community both
neighbor 10.250.0.201 activate
neighbor 10.250.0.201 send-community both
neighbor 10.250.0.202 activate
neighbor 10.250.0.202 send-community both
exit-address-family
address-family ipv4 vrf VRF-A
maximum-paths eibgp 4
no synchronization
bgp router-id 10.250.0.55
network 10.255.1.1 mask 255.255.255.255
exit-address-family
SITE1 PE1 configuration:
router bgp 65000
no synchronization
bgp router-id 10.250.0.101
bgp log-neighbor-changes
neighbor 10.250.0.55 remote-as 65000
neighbor 10.250.0.55 update-source Loopback0
neighbor 10.250.0.55 soft-reconfiguration inbound
no auto-summary
address-family vpnv4
neighbor 10.250.0.55 activate
neighbor 10.250.0.55 send-community both
exit-address-family
address-family ipv4 vrf VRF-A
neighbor 10.1.101.2 remote-as 65001
neighbor 10.1.101.2 activate
neighbor 10.1.101.2 soft-reconfiguration inbound
maximum-paths eibgp 4
no synchronization
bgp router-id 10.250.0.101
exit-address-family
SITE1 PE2 configuration is similar to SITE1 PE1. They both do eBGP peering with dualhomed CE router in AS65001 which announces 10.1.1.0/24 prefix into VRF-A table.
My question is: clearly, the issue is that RR doesn't reflect any routes to its clients (SITE2 PE1&PE2) for 10.1.1.0/24 prefix with 100:1 and 100:2 RDs that dont match it's locally configured RD 55:55 for VRF-A, although they are present in its BGP/RIB tables and used for multipathing. Is this an expected behavior or some feature limitation for specific platform or IOS version? Currently, in this test lab setup I run IOS 12.4(24)T8 on all the devices.
Please, let me know if any further details are needed to get an idea of why this well known and widely used feature is not working correctly in my case. Thanks a lot!
Regards,
Sergey

Hi Ashish,
I tried to remove VRF and address family configurations completely from RR.
router bgp 65000
no synchronization
bgp router-id 10.250.0.55
bgp cluster-id 1.1.1.1
bgp log-neighbor-changes
neighbor 10.250.0.101 remote-as 65000
neighbor 10.250.0.101 update-source Loopback0
neighbor 10.250.0.101 route-reflector-client
neighbor 10.250.0.101 soft-reconfiguration inbound
neighbor 10.250.0.102 remote-as 65000
neighbor 10.250.0.102 update-source Loopback0
neighbor 10.250.0.102 route-reflector-client
neighbor 10.250.0.102 soft-reconfiguration inbound
neighbor 10.250.0.201 remote-as 65000
neighbor 10.250.0.201 update-source Loopback0
neighbor 10.250.0.201 route-reflector-client
neighbor 10.250.0.201 soft-reconfiguration inbound
neighbor 10.250.0.202 remote-as 65000
neighbor 10.250.0.202 update-source Loopback0
neighbor 10.250.0.202 route-reflector-client
neighbor 10.250.0.202 soft-reconfiguration inbound
no auto-summary
address-family vpnv4
neighbor 10.250.0.101 activate
neighbor 10.250.0.101 send-community both
neighbor 10.250.0.102 activate
neighbor 10.250.0.102 send-community both
neighbor 10.250.0.201 activate
neighbor 10.250.0.201 send-community both
neighbor 10.250.0.202 activate
neighbor 10.250.0.202 send-community both
exit-address-family
After this, RR doesn't accept any routes at all from S1PE1&S1PE2 routers, thus not reflecting any routes down to its clients S2PE1&S2PE2 as well:
S1PE1#sh ip bgp vpnv4 all
BGP table version is 6, local router ID is 10.250.0.101
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
   Network          Next Hop            Metric LocPrf Weight Path
Route Distinguisher: 100:1 (default for vrf VRF-A) VRF Router ID 10.250.0.101
*> 10.1.1.0/24      10.1.101.2               0             0 65001 i
S1PE1#sh ip bgp vpnv4 all neighbors 10.250.0.55 advertised-routes
BGP table version is 6, local router ID is 10.250.0.101
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
   Network          Next Hop            Metric LocPrf Weight Path
Route Distinguisher: 100:1 (default for vrf VRF-A) VRF Router ID 10.250.0.101
*> 10.1.1.0/24      10.1.101.2               0             0 65001 i
Total number of prefixes 1
S1PE2#sh ip bgp vpnv4 all
BGP table version is 6, local router ID is 10.250.0.102
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
   Network          Next Hop            Metric LocPrf Weight Path
Route Distinguisher: 100:2 (default for vrf VRF-A) VRF Router ID 10.250.0.102
*> 10.1.1.0/24      10.1.201.2               0             0 65001 i
S1PE2#sh ip bgp vpnv4 all neighbors 10.250.0.55 advertised-routes
BGP table version is 6, local router ID is 10.250.0.102
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
   Network          Next Hop            Metric LocPrf Weight Path
Route Distinguisher: 100:2 (default for vrf VRF-A) VRF Router ID 10.250.0.102
*> 10.1.1.0/24      10.1.201.2               0             0 65001 i
Total number of prefixes 1
RR#sh ip bgp vpnv4 all
RR#sh ip bgp vpnv4 all neighbors 10.250.0.101 routes
Total number of prefixes 0
RR#sh ip bgp vpnv4 all neighbors 10.250.0.102 routes
Total number of prefixes 0
Any feedback is appreciated. Thanks.
Regards,
Sergey

Cat3560 ip load-sharing per-packet

What IOS for the cat3560 have on interface configuration mode command:
ip load-sharing per-packet ?
On my cat3560 with IOS c3560-ipservicesk9-mz.12.2-25.SEB4.bin
I have only:
Switch_A(config-if)#ip load-sharing ?
per-destination Deterministic distribution
<cr>
Thanks in advance.

none, the platform does not support per packet load-sharing at all. Same with higher end catalyst switches.
Please rate helpful posts.

Load sharing in CISCO 12000 XR

Hi All,
How can I change the load sharing algoritham to per-packet in 12000 GSR IOS XR 4.0.1
Thanks,
Arun Mohan

Hi,
you can use below command to acheive load balancing across equal cost links.
cef load-balancing fields L3/L4 ###L3 is default

Error while loading shared libraries: librt.so.1: cannot open shared object

error while loading shared libraries: librt.so.1: cannot open shared object
I cant run my apache server v2.2.3.
Can someone help me?
thanks in advance

That could be an accessibility issue. Check the user with whom you installed Apache server. Check the user has permissions to access the libraries.
-Mahendra.

Error while loading shared libraries

error while loading shared libraries
I just installed 10g . on a Fedora Core 4 machine and after a reboot I tried to run sqlplus and got this type of error. I also got the same error when trying to lsnrctl status ...
[oracle@localhost ~]$ sqlplus
sqlplus: error while loading shared libraries: /apps/oracle/product/10g/lib/libnnz10.so: cannot restore segment prot after reloc: Permission denied
[oracle@localhost ~]$
declare -x CLASSPATH="/apps/oracle/product/10g/JRE:/apps/oracle/product/10g/jlib:/apps/oracle/product/10g/rdbms/jlib"
declare -x EDITOR="vi"
declare -x G_BROKEN_FILENAMES="1"
declare -x HISTSIZE="1000"
declare -x HOME="/home/oracle"
declare -x HOSTNAME="localhost.localdomain"
declare -x INPUTRC="/etc/inputrc"
declare -x KDEDIR="/usr"
declare -x LANG="en_US.UTF-8"
declare -x LD_LIBRARY_PATH="/apps/oracle/product/10g/lib:/lib:/usr/lib"
declare -x LESSOPEN="|/usr/bin/lesspipe.sh %s"
declare -x LOGNAME="oracle"
declare -x LS_COLORS="no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:"
declare -x MAIL="/var/spool/mail/oracle"
declare -x OLDPWD="/home/oracle"
declare -x ORACLE_BASE="/apps/oracle"
declare -x ORACLE_HOME="/apps/oracle/product/10g"
declare -x ORACLE_SID="TST2"
declare -x ORACLE_TERM="xterm"
declare -x PATH="/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/apps/oracle/product/10g/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin"
declare -x PWD="/home/oracle"
declare -x QTDIR="/usr/lib/qt-3.3"
declare -x SHELL="/bin/bash"
declare -x SHLVL="1"
declare -x SSH_ASKPASS="/usr/libexec/openssh/gnome-ssh-askpass"
declare -x SSH_CLIENT="::ffff:192.168.1.152 2503 22"
declare -x SSH_CONNECTION="::ffff:192.168.1.152 2503 ::ffff:192.168.121.8 22"
declare -x SSH_TTY="/dev/pts/2"
declare -x TERM="xterm"
declare -x TMP="/home/oracle/tmp"
declare -x TMPDIR="/home/oracle/tmp"
declare -x USER="oracle"
[oracle@localhost ~]$
Any input would be highly appreciated.
Thanks
Ambrosius

yap. got it..
disabled SELinux then run it.
I didn't get any errors and have it up and running. Here is what I did:
Full Fedora Core 4 install with SELinux enabled (default settings). Then, after install, disable SELinux in the /etc/selinux/config file.
Thanks
Ambrosius

How do I consolidate all this at this point: Icloud Drive, Itunes Match, Local iTunes Library, Local iPhoto, Local Aperture, Photo stream, Familly sharing, sharing on iOS, music sharing on iOS, music sharing on mac etc.

I am trying to grasp all the possibilities for consolidating my stuff and my family's stuff from multiple devices and multiple accounts from multiple sources but I cant.
I have been reading many instructions and FAQ regarding iCloud Drive, iCloud Sharing, iTunes Match, Familly Sharing, file size limitations on iCloud Drive, app sharing on iOS, Backup vs Sync vs cloud sharing, storing iWork documents on iCloud drive, storing iTunes library on iCloud Drive, storing iPhoto library on iCloud Drive, storing Aperture library on the iCloud, the Photos app on iOS with iCloud and many others.... but I feel like I need a systems admin course from apple to manage all of it.
This is what I and my family currently have:
Hardware: Multiple iPhones, Multiple Macs, Apple TV (with hard drive), Multiple iPads.
Operating systems: Everything is upgraded to the latest iOS and Yosemite.
Libraries:
1) Multiple iTunes Libraries locally stored on Macs and IPhones with lossless CD music and iTunes purchased music. What I want to do:
a) Have a main family shared iTunes library across ALL devices that contains our Lossless music and purchased music. so that it can be played across ALL devices. With the ability to have private music for each individual (Not shared).
b) Purchase new music and add it to the family share or purchase music and make it private (Not shared).
2) Multiple iPhoto Libraries macs (With photo stream from iPhones) and ONE Aperture Library on my mac. What I want to do:
a) Have a main family shared photo library that every one can deposit to and view.
b) Store individual iPhoto libraries on iCloud Drive(s)? So that everyone can have their own library and edit it across THEIR devices.
c) Store and use my Aperture Library on iCloud Drive?
Other documents:
iWork files, PDFs etc. What I want to do:
a) Have a main family shared area (on iCloud Drive i suppose) where we can share documents.
b) Sync private documents across ALL individuals devices (Available locally and on iCloud).
c) Store private documents (One instance) on iCloud drive and make them available on ALL individuals devices.
d) Backup of local documents?
Apps:
iOS apps:
a) Share purchased apps?
b) Not share private apps.
Storage:
What do I purchase to accomplish the above:
a) iCloud storage for everyone?
b) iTunes Match for everyone?
c) All of the above?
Conclusion:
It would be great for Apple to explain all this with all the options in one concise document instead of hunting down individual documents and sections all over the place.
Thank you for your help.

Hey there!
You and I are data soulmates. I have been having this trouble for a while and have yet to get my head around it. Our problem is that we've cycled through multiple macs and the "home" or "host" for all the stuff that's now been moved or moving to the Cloud is very scattered. It drives me crazy... almost to the point where I'm thinking about starting a brand-new iCloud account and beginning from scratch.
If you have any experiences or recommendations you could share about your strategy, I would love to hear it.

Error in loading shared libraries

Hi there,
I installed Oracle 8.1.5 on RH 6.1 and I'm getting the following error when trying to run 'dbstart'
svgmgrl: error in loading shared libraries: /opt/oracle/8i/u01/app/oracle/product/8.1.5/lib/libclntsh.so.8.o: undefined symbol: nnflboot
I checked that the library was there but maybe it's corrupt?
Has anyone come across this before?
Cheers,
Michael Gannon.

this is because there is a lot of bug in oracle instalation.
the linux.sh scripts or the patches, i don't remenber, lose this file. You have to get it fron the instalation CD.
as root you have to do:
cd /var/tmp
unzip [oracle instalation home]/stage/Componets/oracle/networking/netclt/8.1.5.0.0/1/DataFile/LIB.0.1.jar
unzip [oracle instalation home]/stage/Componets/oracle/rdbms/8.1.5.0.0/1/DataFile/LIB.0.1.jar
cd $ORACLE_HOME/lib
cp /var/tmp/libdsbtsh8.so .
cp /var/tmp/ntcontab.o .
chmod 644 libdsbtsh8.so ntcontab.o
chown oracle.dba libdsbtsh8.so ntcontab.o
the lib you have missed is due to oracle patches rename the bin oracle. When you try to run dbstart, oracle don't exists.
review the LD_LIBRARY_PATH too.
null

While booting linux VM getting error "error while loading shared libraries

Hi Expert,
while booting Oracle linux Virtual Machine getting error "error while loading shared libraries: libpopt.so.0 cannot open shared object file" no such file or directory
Now i am unable to boot linux, any help appreciated.
Note: Its Oracle Linux 5.8 x86_64 under Oracle VirtualBox
Edited by: IgnitedMind on Apr 30, 2013 7:12 AM
Edited by: IgnitedMind on May 1, 2013 12:04 AM
Edited by: IgnitedMind on May 1, 2013 12:06 AM

Without knowing what you have installed or what modifications you have done it is not possible to say what goes wrong. Like I previously mentioned, you may have installed an incompatible version of a core system library. Sorry, I'm not going to read any installation manual to find out what you might have done wrong. You may need to reinstall the complete system or just the popt installation package.
Based on my experience people sometimes seem to misunderstanding the concept of software version requirements, which are always minimum version requirements and does not mean, for instance, software made for gcc 4.1.10 does not work under 4.1.12. You cannot simply upgrade or downgrade core system libraries without affecting the installed system. Using YUM to install software will check this and prevent you from breaking your system. RPM does not check any dependencies and hence can break your system beyond repair.

Oracleorcl: error while loading shared libraries: libaio.so.1: cannot open

Hi,
I installed Oracle 10g on RHLinux AS4. I created a initOEMREP.ora file
in $ORACLE_HOME/dbs.
my .bash_profile file is,
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
unset USERNAME
#Added on 05-feb-2008
#For oracle1g db installation
export ORACLE_SID=OEMREP
export ORACLE_BASE=/home/app/oracle10gdb
export ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1
export PATH=$ORACLE_HOME/bin:$PATH:.
export LD_LIBRARY_KERNEL=$ORACLE_HOME/lib
export TNS_ADMIN=$ORACLE_HOME/network/admin
export TMP=/home/tmp
export TMPDIR=/home/tmp
While
$sqlplus "/as sysdba"
I am getting
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Feb 6 21:27:08 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
oracleorcl: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
Please help me to solve this.
Regards,
Mathew

Hi,
THank you for the replay. Where will I get this package?
Regards,
Mathew.

Sqlplus: Error while loading shared libraries: libsqlplus.so:

Hi
The Error is as follows:
sqlplus: Error while loading shared libraries: libsqlplus.so: cannot open shared object file: no such file or directory
Installed R12 with RUP2.
User Oracle already exists.
I tried to create a user appsdev as follows:
#adduser appsdev
#passwd appsdev
#cd /home
#chmod 500 appsdev
login as user appsdev/appsdev
run the env file from $ORACLE_HOME
$sqlplus
sqlplus: Error while loading shared libraries: libsqlplus.so: cannot open shared object file: no such file or directory
if run the env file and sqlplus from user ORACLE.i don't get the error.
but from the appsdev user i get the error.
what should i do to execute sqlplus successfully from appsdev user.
regards,
charan

if run the env file and sqlplus from user ORACLE.i don't get the error.
but from the appsdev user i get the error.Is the "appsdev" user the owner of the application tier? If so, source the env file under %APPL_TOP% and check then.
Did you specify the dba group as the primary group for "appsdev" user?

Awk: error while loading shared libraries: libdl.so.2: cannot open shared

I got the following error
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.4681/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
Tuxedo 9.1 base installation complete
when tried to install Tuxedo 9.1 on unbreakable Linux 5. I am trying to install Peoplesoft.
I found this error is pretty common, not necessary appear when installing Tuxedo. I am searching around and a lot of people saying to comment out the line
export LD_ASSUME_KERNEL
The problem is I don't know which in which file I need to do it. Has anyone have the encountered the similar problem before? Thanks.

After reading the installation script, I figure out which is the evil file. I just post it here so if someone get into this problem in the future, he can fix it.
Here is the solution:
Assume you are at the directory where the install.sh is. Do the following:
-bash-3.1$ cd linux/sles9/base
-bash-3.1$ cp tuxedo91_32_SLES_9_x86.bin tuxedo91_32_SLES_9_x86.bin.bak
-bash-3.1$ cat tuxedo91_32_SLES_9_x86.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" >tuxedo91_32_SLES_9_x86.bin
-bash: tuxedo91_32_SLES_9_x86.bin: Permission denied
-bash-3.1$ cat tuxedo91_32_SLES_9_x86.bin.bak | sed "s/export LD_ASSUME_KERNEL/#xport LD_ASSUME_KERNEL/" >tuxedo91_32_SLES_9_x86.bin
Then run the installation script
sh install.sh and be happy as I am now!!!!

Lsnrctl: error while loading shared libraries: libclntsh.so.9.0:

Hi
I copied across an /opt folder from a Redhat 9 server that has Oracle 9.2.0 to a Redhat AS 4. I then set the oracle variables, hoping after that I can get the database up and running. However I get this error, when trying to start the listener or sqlplus:
lsnrctl: error while loading shared libraries: libclntsh.so.9.0: cannot open shared object file: No such file or directory
Is this library part of a certain RPM? Where can I get this RPM or this lirary?
Thanks.

I copied across an /opt folder from a Redhat 9server that has Oracle 9.2.0 to a Redhat AS 4.
So you are saying that you copied the whole
ORACLE_HOME to a new server?? Are you using same
username/group on new server?? Did you relink the
binaries after copying it? What is the output of ls
-l on ORACLE_HOME dir and as what user you are
running lsnrctl command??
Daljit SinghYes I copied the folder that has Oracle_Home and datafiles.
i have created the oracle user.
How do I relink the binaries?
I run it as oracle.

Proc: error while loading shared libraries: libwtc9.so

Hi,
I have a server with RHAS 3.0, and installed 10g database and 10g Forms and Reports.
Now, I try to compile my ProC but I receive the following error:
"[sustore@teste01 src]$ ./comp_all
conv_scci.pc
conv_scci.pc
proc: error while loading shared libraries: libwtc9.so: cannot open shared object file: No such file or directory
make: *** [conv_scci] Error 127
COMPILE_ERROR IN conv_scci.pc
COMPILE_ERROR IN conv_scci.pc
help_eaf.pc
" etc...
Can anyone help me?
Thanks,
Carlos

ry to do this:
find / -name libwtc9.so
will be appear path where is placed this library
and/or without firts step define following ENV var:
if already declared LD_LIBRARY_PATH
export source LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:<path where is placed you library>
if not declared LD_LIBRARY_PATH
export source LD_LIBRARY_PATH=/usr/lib:/user/sbin/lib:<path where is placed you library>

Load sharing in IOS XR

Similar Messages

Maybe you are looking for