Loading characteristic from attribute 0NAME
Hi friends
Firstly, thanks a lot to everybody for taking some minutes to revised this question.
I've got a problem when I load a characteristic from an attribute.
The situation is describe following.
I've got two infocubes. In the first one I have the characteristic 0CUSTOMER. Inside of it, I've defined 0NAME as attribute.
I connect this infocube with the second one using an update rule. In the second infocube 0NAME is defined as a characteristic inside a dimension. So, in the update rule I populate 0NAME using "Master data attribute of Customer".
The problem is that when i visualize the infoobject 0CUSTOMER i see the number and the text, but when i load the second infocube the 0NAME text is empty.
I've checked the rule several times and I don't find where is the error.
Does anybody have an idea of what is happening?
Thanks
Francis.
Hi Francis,
Marco was correct in his statement. There is a difference between the attributes stored in an Infoobject and an attribute stored in an infocube. In an infocube no attribute is stored. All that is stored is a SID (more precisely a dimid refering to a sid), not the attribute. So you if you do a "MD attribute of" the BW will try to find a SID. If it does not find a SID, it will not fill the field.
To find a SID you have to fill "0NAME" with all possible Strings to load. This does not sound feasible to me. What I wonder is, why you have "0name" in the Infocube. If it is an attribute of 0CUSTOMER, you should avoid 0NAME as entry in the infocube and use the attribute of 0CUSTOMER instead. I don't think you will ever do a search via 0NAME in the Infocube, therefore it is not needed.
Kind regards,
Jürgen
Similar Messages
-
Hi guys,
is it possible to load data from attribute of InfoObject to text of the same InfoObject.
I have this requierement: the text (description long) of InfoObject should be filled defends on the content of one attribute of this InfoObject.
Is it possible via Update Rule? (we are using BW3.5)
And how?
Thanks in adance!
RegardsHI,
1st) activate your object as data target and do the assignment in the transfer or update rules.
--- How can I active my InfoObject (Text if the InofoObject)as data target?
Right Click your info area and choose " Insert characteristics as a Datatarget" and give your info object Id.
2) create a generic datasource on the p-table of your object and assign that datasource as text datasource to your object.
--- How can I create a generic datasource on the p-table of your object ?
For Eg: your info object name is like this
ZIO_CID
For this P table will be like this
/BIC/PZIO_CID
In RSO2 tcode Generic datasources create datasource based on this table .
Hope it helps
Regards,
Arun.M.D -
Help - Step by Step Material on How to load Data from flatfile to BI 7.0
Hi BI Experts,
Can any one send the document or a pdf file on how to load data from flat file to BI 7.0 in step by step process.
Thanks in Advance
Regards
Ramakrishna Kamurthy
+91-99631010731. On log on you will be placed in the SAP Easy Access Strategic Management/ Business Analytics
1. You see the screen divided in two segments.
2. Follow the left segment.
3. Click on the Business Information Warehouse.
4. Sub Menu  BW Administration.
5. You find various entries in it.
6. Now double click on UG_BW_RSA1-Administrator Workbench
2. Creation of Info Area
1. Click on InfoObjects.
2. Now in the right hand side screen select the InfoObjects (First item on the top). Right click the mouse and select Create InfoArea.
3. A dialog box pops up.
4. Give the InfoArea as ZIVY_Iarea.
5. Give the Long Description as ZIVY Info Area.
3. Create a Catalog:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_CHCAT
i. Description = ZIVY Character Catalog
ii. InfoObjectType: Check the Character. ( As we are creating the master data, check the Character)
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CUST and
i. Description Customer Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CUST: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP .
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_CUST, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_CITY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CITY and
i.
Description
Customer
City Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CITY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CITY, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_STATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_STATE and
i.
Description
Customer
State Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_STATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_STATE, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_CTRY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CTRY and
i. Description Customer Country Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CTRY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
1. Creation of Attributes and InfoObject from the ZIVY_CUST InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_CUST. Double click the InfoObject ZIVY_CUST.
6. You find the screen Change Characteristic ZIVY_CUST:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_CITY and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_STATE, ZIVY_CTRY.
11. Now, we will create another InfoObject ZIVY_TEL, from here.
12. So type ZIVY_Tel and enter the ENTER KEY.
13. A dialog box pops up, and request you If you want to Create an InfoObject
14. Select Create Attribute As Characteristic and click the check mark.
15. Another window pops up. Give the following:
i. In the General Tab:
1. Long Description: ZIVY Telephone Number
2. Short Description: ZIVY Telephone Number
3. DataType : NUMC
4. Length : 10
5. Uncheck Attribute Only
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies
iv. Now click the TICK MARK
1.
1. Click the ACTIVATE
2. A window pops up.
i. Select activate dependent InfoObjects.
ii. Click the Check Mark.
1. Creation of InfoObject: ZIVY_DATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_DATE and
i. Description ZIVY Date.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_DATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: DATS
2. Length: 8
ii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
2. Create ZIVY Application Component:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Right click the mouse pointer and select the entry Create Application Component
5. A window pops up.
i. Application Component: ZIVY_APPCOMP
ii. Long Description : ZIVY Application Component
iii. Click the check mark.
1. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_CUST
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the Customer Info Object.
2. Select the Customer Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_CUST
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_CUST,
3. Second field is ZIVY_CITY.
4. And so on.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_CUST,
4. Third field is 0TXTMD.
5. Click the Transfer Rule adjacent to 0LANGUAGE
6. A window pops up.
a. Check the CONSTANT and give the value as EN
b. Click the TICK MARK.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_CUST_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_CUST_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_ATTR.
ii. Select ZIVY_CUST_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_TEXT.
ii. Select ZIVY_CUST_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_MAT and
i. Description ZIVY Material Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_MAT: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 17).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_MAT, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_GROUP
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_GROUP and
i. Description ZIVY Material Group.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_GROUP: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_GROUP, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_COLOR
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_COLOR and
i. Description ZIVY Material Color.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_COLOR: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_COLOR, by clicking the icon ACTIVATE.
2. Creation of InfoObject from the ZIVY_MAT InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_MAT. Double click the InfoObject ZIVY_MAT.
6. You find the screen Change Characteristic ZIVY_MAT:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_GROUP and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_COLOR.
11. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_MAT
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Material Info Object.
2. Select the ZIVY Material Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_MAT
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_MAT,
3. Second field is ZIVY_GROUP.
4. Third field is ZIVY_COLOR.
5. Check the mapping. If you dont see the mapping.
6. Click on the empty row in the group Assign InfoObjectField, the box to the right.
7. Type ZIVY_GROUP, ZIVY_COLOR.
8. Check the transfer rules.
9. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_MAT,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_Material_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_Material_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_ATTR.
ii. Select ZIVY_MAT_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_Material_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_TEXT.
ii. Select ZIVY_MAT_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_MATERIAL_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SPER and
i. Description ZIVY Sales Person Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SPER: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 24).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_SPER, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_SREG
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SREG and
i. Description ZIVY Sales Region.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SREG: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_SREG, by clicking the icon ACTIVATE.
2. Creation of Attributes from the ZIVY_SPER InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_SPER. Double click the InfoObject ZIVY_SPER.
6. You find the screen Change Characteristic ZIVY_SPER:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_SREG and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_SPER
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Sales Person Info Object.
2. Select the ZIVY Sales Person Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_SREP
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_SPER,
3. Second field is ZIVY_SREG.
4. Check the mapping. If you dont see the mapping.
5. Click on the empty row in the group Assign InfoObjectField, the box to the right.
6. Check the transfer rules.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_SREP MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_SPER,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_SREP_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_SREP_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_ATTR.
ii. Select ZIVY_SPER_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_TEXT.
ii. Select ZIVY_SPER_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii.
Browse the data.
1. Creation of InfoObject Catalog with Key Figures:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_KEYCAT
i. Description = ZIVY Key Figures Catalog
ii. InfoObjectType: Check the Key Figures.
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_KEYCAT,which is ZIVY Key Figures Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_AMT and
i. Description ZIVY Amount Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Create Key Figure ZIVY_AMT: Detail.
2. In this screen the following fields have to be modified:
i. In the Type/ Unit Tab
1. DataType: Amount
2. Unit/ Currency = 0Currency
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_AMT, by clicking the icon ACTIVATE.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. -
Load master data attributes of 0BBP_VENDOR and 0GN_VENDOR in SRM
HI ,
We are in BI Content version 7.04 recently migrated .
I was told to load the attributes of 0BBP_VENDOR and 0GN_VENDOR.But when i collect them in BI content with dataflow before ,i could see only the infoobjects, update rules for 0gn vendor and only info object for 0bbpvendor.
So what could the reason for this or am i missing anything in installing? Please help me with all you inputs and suggestions.0BBP_VENDOR is a Reference Characteristic to 0BPARTNER so it won't have dataflow by itself... Once data is loaded into 0BPARTNER, it will have it too...
0GN_VENDOR is different, that's why you see update rules for it... It loads data from 0VENDOR, if I'm not mistaken... -
ERROR : "Exceptions in Substep: Rules" while loading data from DSO to CUBE
Hi All,
I have a scenario like this.
I was loading data from ODS to cube daily. everything was working fine till 2 days before. i added some characteristic fields in my cube while i didn't do any change in my key figures. now i started reloading of data from ODS to cubes. i got the following error "Exceptions in Substep: Rules" after some package of data loaded successfully.
I deleted the added fields from the infocube and then i tried toreload data again but i am facing the same error again "Exceptions in Substep: Rules".
Can any one tell me how to come out from this situation ?
Regards,
Komik ShahDear,
Check some related SDN posts:
zDSo Loading Problem
Re: Regarding Data load in cube
Re: Regarding Data load in cube
Re: Error : Exceptions in Substep: Rules
Regards,
Syed Hussain. -
Error in loading data from PSA to masterdataTables by using ProcessManually
Hello,
While loading Attribute master data to Masterdata tables, the data is loaded successfully to PSA but when I clicked process manually tab in the monitor screen to load the Attribute master data to Masterdata tables it is showing error.
Can anyone pls help me in solving this issue.
Thanks,
SoujanyaHi Soujanya,
If it is a SAP BI 7 data flow, in order to load data from PSA to the InfoObject master data tables, you have to run the corresponding DTP.
On the other hand, if it is a SAP BW 3.x data flow, the InfoPackage should be configured so as to update data to subsequent targets (that is to say, the InfoObject).
Finally, take into account that if the DataSource provides duplicate records, the DTP or the InfoPackage (depending on the dataflow version) should be configured in order to deal with it. Otherwise, you could receive error messages during data load.
I hope this helps you.
Regards,
Maximiliano -
Error when scheduling the infopackage for loading Master data attributes
Hi,
Iam getting the following error message when scheduling this Master data Attributes ZIP_0PLANT_ATTR_FULL..( Flexible update of Master data info objects)..
In Data load monitor error i got this following error message.
Error message when processing in the Business Warehouse
Diagnosis
An error occurred in the SAP BW when processing the data. The error is documented in an error message.
System response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
ThanksHI,
A caller 01, 02 or equal to or greater than 20 contains an error meesage This is an Idoc error. Please check the Idocs :
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Thanks,....
Shambhu -
Where to set lock while loading master data attributes
Hello Experts,
I have two different datasources from ECC which loads into 0CUST_SALES attributes. I'm using two different DTP & transformation which are loading data in the this infoobject attributes.
When i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".
Here what exactly LOCK means?
Thanks in advance.
Zakir Khan.Hi,
The lock means that some program is updating the master data (a table) and at the same time other program can not update that same master data. When the first program completes the updation it will release the lock so that the other program can update this.
In your case you and schedule the DTP one after another.
Thanks -
Help needed in loading data from BW(200) to APO(100).
Hi everybody,
I am trying to load a master data from BW(200) to AP1(100) , this is what i did.
1) created a InfoObject, with some fields (general-ebeln, Attributes- bukrs, werks,matnr).
2) created and activated communication structure.
3) Then went to BW(200) created data source(sbiw) and extracted datas from a particular info object, which had same fields and saved it, then went to RSA3 checked for data availability in data source , and it was available there too.
4) Came back to AP1(100), in the source system tab, opened BW(200) and replicated the datas. I was able to see the Data source name which is created in BW(200).
5) Create and activated the Transfer struct.
6) created a info package, and loaded the data, but the monitor says " NOT YET COMPLEATED" , "CURRENTLY IN PROCESS". and it also shows "0 of 0 RECORDS".
I want to know,
1) Is there any mistake in what i have done above ?
2) how long will it take to complete the process (i.e. the loading) ?.
Please help me through this problem.
Thanks,
Ranjani.Hi,
I am surprised with your steps. In APO, you want to load data from a particular infoobject from BW. Why did you create a specific extractor in SBIW???
You have just reinvented the wheel... It reminds me some people in the world ...
Here is what you should do:
- in BW, at the infosource level, you create a direct infosource based on the infoobject that you want to extract the data to APO (let's say 0MATERIAL)
- in BW, at the infosource level, you right click on the infosource itself and you choose 'GENERATE EXPORT DATASOURCE. That will create the datasources for you (attributes, texts, hierarchies) depending on the infoobject settings. The names of these datasources will begin with a 8 for the datamart
- in APO, you replicate the BW system. Now you find the datasources 80MATERIAL something
- in APO, you create the transfer rules to your infosource and you can load
Just give it a try
Regards -
Regarding Short Dump While loading data from DB Connect
Dear All,
We are having an issue of getting short dump while loading data from DB Connect to BW. We were able to load the data into BW Dev using the same data source without any problem. Whereas in Production, I am getting the following error:
Runtime Error PERFORM_CONFLICT_TAB_TYPE
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
What could be the reason for the error that I am gettinghi,
Refer Note 707986 - Writing in trans. InfoCubes: PERFORM_CONFLICT_TAB_TYPE
Summary
Symptom
When data is written to a transactional InfoCube, the termination PERFORM_CONFLICT_TAB_TYPE occurs. The short dump lists the following reasons for the termination:
("X") The row types of the two tables are incompatible.
("X") The table keys of the two tables do not correspond.
Other terms
transactional InfoCube, SEM, BPS, BPS0, APO
Reason and Prerequisites
The error is caused by an intensified type check in the ABAP runtime environment.
Solution
Workaround for BW 3.0B (SP16-19), BW 3.1 (SP10-13)
Apply the attached correction instructions.
BW 3.0B
Import Support Package 20 for 3.0B (BW3.0B Patch20 or SAPKW30B20) into your BW system. The Support Package is available oncenote 0647752 with the short text "SAPBWNews BW3.0B Support Package 20", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
Import Support Package 14 for 3.10 (BW3. 10 Patch14 or SAPKW31014) into your BW system. The Support Package is available once note 0601051 with the short text "SAPBWNews BW 3.1 Content Support Package 14" has been released for customers.
BW3.50
Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available once note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, has been released for customers.
The notes specified may already be available to provide advance information before the Support Package is released. However, in this case, the short text still contains the term "Preliminary version" in this case.
Header Data
Release Status: Released for Customer
Released on: 18.02.2004 08:11:39
Priority: Correction with medium priority
Category: Program error
Primary Component: BW-BEX-OT-DBIF Interface to Database
Secondary Components: FIN-SEM-BPS Business Planning and Simulation
Releases
Software
Component Release From
Release To
Release And
subsequent
SAP_BW 30 30B 30B
SAP_BW 310 310 310
SAP_BW 35 350 350
Support Packages
Support
Packages Release Package
Name
SAP_BW_VIRTUAL_COMP 30B SAPK-30B20INVCBWTECH
Related Notes
693363 - SAPBWNews BW SP03 NW'04 Stack 03 RIN
647752 - SAPBWNews BW 3.0B Support Package 20
601051 - SAPBWNews BW 3.1 Content Support Package 14
Corrections Instructions
Correction
Instruction Valid
from Valid
to Software
Component Ref.
Correction Last
Modifcation
301776 30B 350 SAP_BW J19K013852 18.02.2004 08:03:33
Attributes
Attribute Value
weitere Komponenten 0000031199
Thanks
(Activate ODS/Cube and Transfer rules again..) -
How to Load Hierarchies from flatfile in BI7
Hello Gurus,
How to load Hierarchies from flat file in BI7
As when creating datasource in BI7,
IT GIVES FOLLOWING OPTIONS
TRANSCTION DATA
MASTER DATA TEXTS
MASTER DATA ATTRIBUTES...
ALL THESE WE BRING TO PSA LEVEL BY INFOPACKAGE AND SEND DATATARGET BY DTP...
But how about Hierarchies...
Looking for reply
Regards
GuruLook at the below blog for step by step procedure :
Hierarchy Upload from Flat files
http://help.sap.com/saphelp_nw04/helpdata/en/fa/e92637c2cbf357e10000009b38f936/frameset.htm -
How to load data from info object to ODS
Hello BW Gurus,
Is their any way to load data from info object to ODS and I am unable to fine the Info source for that particulate info object master data.
For ex: we have 0PROFITCENTER as info object which is getting loaded everyday. We want same data in ODS too but I don't find any info source related to this info object to create update ruled.
Please advise me how to proceed with this,
Thanks,
Swathi.hi Swathi,
as mentioned, if you just need the master data text or attribute update, then it's sufficient to load 0PROFITCENTER master data. (don't forget to 'apply hierarchy/attribute change' - rsa1->tools)
if you are going to update attribute in ods with attribute from 0PROFITCENTER, you can choose look up master data attribute method in update rules.
if the requirement is really need 0PROFITCENTER to assign to update rules, then first you have to 'generate export datasource' for infoobject 0PROFITCENTER, right click the infoobject and 'generate export datasource', then do 'replicate datasource' from bw myself, after that it will available. to display it you may go to rsa1->infosource, and menu settings->display generated objects.
hope this helps. -
How to load hierarchy from file into InfoObject with compounding Attr & LN
Hi,
I have created an InfoObject called YCOSTC0 which has a compounding attribute 0CO_AREA. and Text is Lanugage dependent, hence the key is YCOSTC0, 0CO_AREA and LANGUAGE, now when i load hierarchy from flat file as mentioned below, it creates duplicate blank rows in master data table, becuase the flat file contains only the YCOSTC0 Info Object and this data gets loaded into 0CO_AREA column in master data table which is the first column. how can i load hierarchies from flat file into an InfoObject that has a compounding attribute and Language dependent. please provide me a sample file structure with data.
NodeID InfoObject Node Name Link Name Parent ID Language Short Text Medium Text Long Text
1 0HIER_NODE CC_HIER EN Cost Center Heirarchy Cost Center Heirarchy Cost Center Heirarchy
2 YCOSTC0 C001 1 EN CC 1 Cost Center 1 Cost Center 1
3 YCOSTC0 C002 2 EN CC 2 Cost Center 2 Cost Center 2
4 YCOSTC0 C003 2 EN CC 3 Cost Center 3 Cost Center 3
5 YCOSTC0 C004 3 EN CC 4 Cost Center 4 Cost Center 4
6 YCOSTC0 C005 3 EN CC 7 Cost Center 7 Cost Center 7
7 YCOSTC0 C006 4 EN CC 5 Cost Center 5 Cost Center 5
8 YCOSTC0 C007 4 EN CC 8 Cost Center 8 Cost Center 8
9 YCOSTC0 C008 4 EN CC 10 Cost Center 10 Cost Center 10
10 YCOSTC0 C009 7 EN CC 6 Cost Center 6 Cost Center 6
11 YCOSTC0 C010 6 EN CC 9 Cost Center 9 Cost Center 9
Thanks
Akila RHi -
Check the following link.
Hierarchy Upload from Flat files
Anesh B -
How to load images from BLOB to javascript?
hi, Guys:
I need to load thumbnail images from BLOB to multiple markers' infowindow in Google map . I have implemented Google map in APEX. I load the data suchas text for every marker's infowindow from Oracle database table with PL/JSON, and infowindow works fine. Could anyone give me a suggestion or example so I know how to load images to javascript?
Thanks a lot.
Database: Oracle 11g R2
APEX: APEX 4.1
Thanks.
Samlxiscas wrote:
hi, VC:
Thanks for your kind reply. I need to render these images out of APEX session, actually in javascript that is related to Google map markers' infowindow.
I checked the documents of APEX_UTIL.GET_BLOB_FILE_SRC, but my impression is I need to use it in APEX instead of javascript if my understanding is correct. I already implemented a procedure with PL/SQL to load images from a BLOB column in Oracle database. But the problem is, how can I pass it to javascript code out of APEX to javascript (I could pass text or number from APEX to javascript with PL/JSON though,But I assume that still google map will be within a valid apex session? if so you should be able to use the above api.
Basically what this api does is generates a kind of url to each blob in the database, not sure how google api's deal with this though. Why don't you give it a try?
The other option is to make your pl/sql procedure public and then you can generate the json to include the images urls such as:
"employees" : [{
"firstName" : "John",
"lastName" : "Doe",
"imgSrc" : "http://somewhere/db_schema.your_download_proc?p_file=#ID#",
"firstName" : "Anna",
"lastName" : "Smith"
"imgSrc" : "http://somewhere/db_schema.your_download_proc?p_file=#ID#",
"firstName" : "Peter",
"lastName" : "Jones"
"imgSrc" : "http://somewhere/db_schema.your_download_proc?p_file=#ID#",
}And then you can use this new attribute to populate the images in javascript using standard img tag
See this tutorial http://docs.oracle.com/cd/E14373_01/appdev.32/e13363/up_dn_files.htm
I did not find any method in PL/JSON to pass image object)? So far I only found example to load images from local files to javascript.Hmm..I don't think you should load image objects.
Vikram -
Loading data from flat file to ODS
Hi Experts,
I have a developed a report, in which Flat file is the datasource and data target as DSO.
Here I have one requriment to Increatment the counter value in TVARVC table after every load compleate.
Can this be done thru Process chain? I belive this can be done thru process chain by creating variable.
If this can be done thru Process chains can any experts send me sample examples code.
Thanks In Advance.
Sreedhar.MHi sridhar,
We have a similar scenario in which we will load data from flat file to datasource the file name (x_20081010.dat) of such format being fetched from the low value of the TVARVC table ... once successfully executed we had program to increment the value of low which increments by one day adn the next day the file with that will be placed in the application server...
U can create a abap program varaint and attribute for that and u can achieve that.... this is sample code which searches for the string and after some coding i.e once ur file has been loaded successful code u can write similar code to increment or counter values which u are asking for...
search s_tvarvc-low for '20'.
if sy-subrc ne 0.
sy-msgty = 'E'.
sy-msgid = 'ZWM1'.
sy-msgno = '000'.
sy-msgv1 = 'Unable to find DATE to increment'.
raise unable_increment.
else.
w_date = s_tvarvc-low+sy-fdpos(08).
w_nextdate = w_date + 1.
replace w_date with w_nextdate into s_tvarvc-low.
modify tvarvc from s_tvarvc.
endif.
Regards
vamsi
Maybe you are looking for
-
How do I combine already pdf files in pack?
How do I combine 2 pdf files in adobe pack?
-
ISE 1.1.2 failover - Syncronization issue
Hi everone, Scenário: I've deployed two Cisco ISE 1.1.2 nodes as follows: Node 1 as Primrary Admin, Policy Server and Monitoring Node 2 as Secondary Admin, Policy Server and Monitoring All configured roles works as expected. Problem: Once I promote t
-
Vendor and Material (MARA and LFA1) linking
Hi , I have created a view on top of mara marc and mard for one of my report requirements. Here I have mara-mfrnr field is mapping to manufacurer field in BW. Now I need to restrict the data in to this field by acct group which is available in 0vendo
-
CS4 never installs correctly or fully?
Hey everyone, A problem I have come across is that whenever I install CS4, at least 2 programs are not working at all. I have since uninstalled at least 6 times, done a format, and a bunch of other troubleshooting/solutions from the forums. Each ti
-
Small problem re: text entry
Hi all, I am having a strange problem with some text fields I am using. It can't be a big problem though. Basically, I am trying to take input from two text fields which are then used as parameters in a method when a button is clicked. Ie: private vo