Loading file of BMPs into one array

Hi,
For some reason I am having trouble loading a batch of BMP files into one 2D array. I have attached the VI I have been messing with for some time now... (as well as a couple sample BMPs if someone wants them)
I want to take each BMP in a folder, extract the 2D array and put it into one array. Each new image's 2D array goes on the row after the previous image.
Any help for this seemingly simple problem?
Solved!
Go to Solution.
Attachments:
loadBMPs.vi ‏13 KB
DataBMP.zip ‏3 KB

1) You are correctly finding the filenames... but what are you doing with the single path? That's only going to store the last one in the loop... and you don't connect it to the BMP vi.
2) You should just do everything in the for loop.

Similar Messages

I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them.

I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them on the computer?

Hi Craig
Unfortunately, in your case, there isn't really a way to separate them as far as I can think.
You could try restoring from a backup, and choosing an older backup perhaps
Cheers

Problem generating manifest. Could not load file or assembly or one of its

Dear all,
i am using visual studio 2008 on windows7 (32 bit). my project was running very fine but today i received the following error when i build my project
"Problem generating manifest. Could not load file or assembly or one of its dependencies. An attempt was made to load a program with an incorrect format"
i have deleted all the refrences and then added all one by one , all refrences added successfully, but when i added "CrystalDecisions.ReportSource" and build the application i found the above error. '
i will be very thankfull if anyone could help me
Regards.

What version of Crystal Reports?
- Ludek

How to load file with 500M into noncontiguous memory and visit them

My data file consist of a serial of 2d images. Each image is 174*130*2 butes and the total images in the file is up to 11000, which takes almost 500M bytes. I hope to load them into memory in one turn since I need to visit either image many times in random order during the data processing. When I load them into one big 3d array, the error of "out of memory" happended frequenctly.
First I tried to use QUEUE to load big chunk of data into noncontiguous memory. Queue structure is a good way to load and unload data into noncontiguous memory. But it dosn't fit here since I may need to visit any of the all the images at anytime. And it is not pratical if I dequeue one image and enqueue it into the opposite end, since the image visited may be not in sequential order.
Another choice is to put the whole file into multiple small arrays. In my case, I may load the data file into 11000 small 2d arrays and each array holds the data of one image. But I don't know how to visit these 2d array and I didn't get any cues in the posters here.
Any suggestion?
PC with 4G physical memory, Labview 7.1 and Win XP.
Thanks.

I'll try to get the ball rolling here -- hopefully there's some better ideas than mine out there.
1. I've never used IMAQ, but I suspect that it offers more efficient methods than stuff I dream up in standard LabVIEW. Of course, maybe you don't use it either -- just sayin'...
2. Since you can't make a contiguous 11000-image 3D array, and don't know how to manage 11000 individual 2D arrays, how about a compromise? Like, say, 11 3D arrays holding 1000 images each?   Then you just need ~50 MB chunks of contiguous memory.
3. I'm picturing a partially hardcoded solution in which there are a bunch of cloned "functional globals" which each hold 1000 images of data.  This kind of thing can be done using (A) Reentrant vi's or (B) Template vi's.  You may need to use VI Server to instantiate them at run-time.
4. Then I'd build an "Action Engine" wrapper around that whole bunch of stuff. It'd have an input for image #, for example, image # 6789. From there it would do a quotient & remainder with 1000 to split 6789 into a quotient of 6 and remainder of 789. Then the wrapper would access function global #6 and address image # 789 from it.
5. Specific details and trade offs depend a lot on the nature of your data processing.  My assumption was that you'd primarily need random access to images 1 or 2 at a time.
I hope to learn some better ideas from other posters...
-Kevin P.
P.S. Maybe I can be one of those "other posters" -- I just had another idea that should be much simpler. Create a typedef custom control out of a cluster which contains a 2D image array. Now make an 11000 element array of these clusters. If I recall correctly, LabVIEW will allocate 11000 pointers. The clusters that they point to will *not* need to be contiguous one after the other. Now you can retrieve an image by indexing into the array of 11000 clusters and simply unbundling the 2D image data from the cluster element.

I would like to get only specific channels from several .csv files and concatenate into one group.

Hello,
I am working with other groups and getting the data in daily .csv files. When I use the "concatenate groups" script along with a script on importing files, I end up getting a huge file that takes about an hour to concatenate. In order to reduce the amount of time and memory that this takes, I was hoping that someone could help me modify the script so that I could just list the channel name that I am interested in and concatinating only those channels rather than all of them.
For example, if voltage, temperature, pressure and time data are taken daily for 30 days, I would like to import only the temperature and time data (from .csv format) and concatenate into one group.
I have attached the .vbs files that I use.
Thanks in advance,
Alan
Attachments:
Import and concatenate files.zip ‏9 KB

Hi Alan,
Actually, the feature you're asking for is already in the code of mine that you sent back. Look on line 11 of the main VBScript: ChannelSet = "" ' "" or "1-" (DataPlugin) or "Sheet1" (EXCEL Wizard)
If this "ChannelSet" parameter is set to something other than "" or "1-" then it is used in line 78:
Call DataFileLoadSel(FilePaths(i), DataPlugin, ChannelSet)
Yo can specify the channel indices to load with an expression like this:
ChannelSet = "[1]/[1],[3]"
Let me know if you have further questions,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Load files from bridge into photoshop lagers

I am trying without success to load (two) files from bridge to Photoshop as layers.

I am not exactly sure what you are asking, but I know you can create stacks in Bridge by simply selecting the desired files and pressing ctrl G on the PC (command G on MAC?) I believe there is a forum dedicated to Bridge scripting. You might have better luck there.

Multiple files, same structure into one message without BPM

Hi,
Is it possible to read multiple files (each with single row) as one message without BPM by some configuration in channel?
For example:
input files placed simultaneously in input folder:
file1: a,b,c
file2: f,g,h
file3: k,l,m
after adapter picks files, xml message:
<Message_type>
 <RecordSet>
 <file>
 <A>a</A>
 b
 <C>c</C>
 </file>
 <file>
 <A>f</A>
 g
 <C>h</C>
 </file>
 <file>
 <A>k</A>
 l
 <C>m</C>
 </file>
 </RecordSet>
</Message_type>

Bond,
Yes Bond. You can read the pattern what you have given.
First Read the whole line in the file as one record. Now take the substring or write udf in mapping. This entirely depends upon your requirement.
Regards,
---Satish

How to gather several scanned file type document into one pdf file?

I don't know if I make myself clear...
anyway, thank you in advace for your answers!
leya
tiger Mac OS X (10.4.4)

Hi, leya.
I presume the scanned documents have been saved as individual PDFs.
To combine PDFs:
• If you have Adobe Acrobat, either Standard or Professional Edition, you can combine PDFs by opening one of the PDFs and then using Document > Insert Pages to add additional PDFs to the first you have opened, then save the combined PDF either replacing the first PDF or using File > Save As... to save the combined PDF with a different file name.
• If you do not have Acrobat, you can download and use any of the these third-party tools. In particular, Combine PDFs is both freeware, popular, and highly rated.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

10GR2 - How can I load multiple row values into one field?

Hi
Can anyone please help with a problem I'm having with merging data.
The source table has multiple entries for the same Id e,g,
ID Code
1 123
1 234
2 123
2 567
The output should only have one row per ID e.g.
ID Code_List
1 123;234
2 123;567
Do you know what operator I could use that would allow me to do this? I've looked at unpivot but I think I would need multiple output fields (one for each Code). I have to concatinate the codes and separate with a semi-colon.
Thanks
GB

Q) Input data
=============
COL_0,COL_4
1235,"G0123,G124,G25,G6"
1236,"G01,G23,G124,G25,G6"
1237,"G0123,G1,G24,G25,G6"
1238,"G,G0123,G124,G25,G6"
1239,"G0123124,G256"
Output
======
TEST_ID,TEST_VAL
1235,G0123
1235,G124
1235,G25
1235,G6
1236,G01
1236,G23
1236,G124
1236,G25
1236,G6
1237,G0123
1237,G1
1237,G24
1237,G25
1237,G6
1238,G
1238,G0123
1238,G124
1238,G25
1238,G6
1239,G0123124
1239,G256
I wrote this procedure...
declare
rcd_cnt number;
test_id123 number;
junk_1 number;
cd_occurences number;
child_count number;
str_abc varchar2(200);
char_pos     number default 0;
cd_temp_str varchar2(50);--:= 'G0123,G124,G25,G6';
begin
select nvl(count(col_4),0) into rcd_cnt from test_ee where col_4 is not null;
for aa in 1 .. rcd_cnt loop
select col_0,rownum rn,nvl(trim(col_4),0) into test_id123,junk_1,cd_temp_str from (select col_0,rownum rn,col_4 from test_ee where col_4 is not null) where rn = aa;
--dbms_output.put_line('...I am in for loop...' || cd_temp_str);
     --dbms_output.put_line('===================' || rcd_cnt || '.................' ||aa);
cd_occurences := length(cd_temp_str) - length(replace(cd_temp_str,','));
dbms_output.put_line(cd_temp_str || '...Str Occurences are ...'||cd_occurences ||'**************'||test_id123);
child_count :=0;
for z in 1..length(cd_temp_str)+1 loop
child_count := child_count+1;
     if(instr(cd_temp_str,',') > 0) then
     char_pos := instr(cd_temp_str,',',1,1);
          str_abc := substr(cd_temp_str,1,char_pos-1);
     dbms_output.put_line('..Partial String of..'|| z ||'..is.....' || str_abc);
          insert into test_xx(test_id,test_val) values(test_id123,str_abc);
     end if;
     cd_temp_str := substr(cd_temp_str,char_pos+1,length(cd_temp_str));
     if(cd_occurences=child_count) then
     dbms_output.put_line('..Partial String of..is.....' || cd_temp_str);
          insert into test_xx(test_id,test_val) values(test_id123,cd_temp_str);
     end if;
end loop; -- close for of z */
--dbms_output.put_line('...I am in end for loop...');
     end loop; -- close for of aa
end;
instead of procedure,is there any way from sqlqery.

Reading a pdf file from URL into Byte array/ByteBuffer in an applet.

I'm trying to figure out why this particular snippet of code isn't working for me. I've got an applet which is supposed to read a .pdf and display it with a pdf-renderer library, but for some reason when I read in the .pdf files which sit on my server, they end up as being corrupt. I've tested it by writing the files back out again.
I've tried viewing the applet in both IE and Firefox and the corrupt files occur. Funny thing is, when I trying viewing the applet in Safari (for Windows), the file is actually fine! I understand the JVM might be different, but I am still lost. I've compiled in Java 1.5. JVMs are 1.6. The snippet which reads the file is below.
public static ByteBuffer getAsByteArray(URL url) throws IOException {
        ByteArrayOutputStream tmpOut = new ByteArrayOutputStream();
        URLConnection connection = url.openConnection();
        int contentLength = connection.getContentLength();
        InputStream in = url.openStream();
        byte[] buf = new byte[512];
        int len;
        while (true) {
            len = in.read(buf);
            if (len == -1) {
                break;
            tmpOut.write(buf, 0, len);
        tmpOut.close();
        ByteBuffer bb = ByteBuffer.wrap(tmpOut.toByteArray(), 0,
                                        tmpOut.size());
        //Lines below used to test if file is corrupt
        //FileOutputStream fos = new FileOutputStream("C:\\abc.pdf");
        //fos.write(tmpOut.toByteArray());
        return bb;
}I must be missing something, and I've been banging my head trying to figure it out. Any help is greatly appreciated. Thanks.

Keshav.. wrote:
I too was going through the same problem but I found for some pdfs it worked fine.I didnt get ur solution.Please explain bcoz it may work for every pdfThis thread is over 3 years old and dead. Please open a new thread which provides details of the problem you are having. Link to this thread if you think it is necessary.
I shall lock this thread.

How to merge pdf files into one pdf file?

In E-Rec we need the capability to mass printing for correspondance. There i want to merge pdf files for candidates into one pdf file. I am doing the following:
Data: lv_document1           TYPE rcf_s_cs_document_content.
LOOP AT activity_object_tab INTO ls_activity_object.
    lo_act_corr ?= ls_activity_object-activity.
     CALL METHOD lo_act_corr->process_document
       EXPORTING
         channel = 'FRONTEND'
       IMPORTING
         document = lv_document1.
ENDLOOP.
Now lv_document1 contains the pdf file in lv_document1-DOCUMENT_X which is of type RAWSTRING.
This works for one candidate, in this case the pdf for last candidate will be displayed.
But how would i append in the loop or what would i need to do display all candidates in one pdf.
Any help will be appreciated.
Thanks

File>Create PDF>From File.
Please post followups in the Acrobat forum.
Bob

Could not load file or assembly because runtime is newer than currently loaded run time

I have recently upgraded to TestStand 2010 and Visual Studio 2010 from TestStand 4.2.1 and Visual Studio 2008. I am now getting the following error in the sequence analysis for all calls to my .net dlls.
"Module for Step 'My_StepType' not Loadable. Could not load file or assembly or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded."
I do not know what runtime it is referring to. It all worked previously. I have tried to browse to the dll again but that doesn't make any difference.
Any ideas?
Thanks.
Solved!
Go to Solution.

Hi,
By default the TestStand Sequence Editor targets .NET 2.0 and the .NET adapter can call assemblies built in .NET 2.0-3.5. This is because those versions of .NET all share the same CLR version. .NET 4.0 however moved to a new CLR, meaning that if you want to call .NET 4.0 assemblies you will need to make the Sequence Editor target .NET 4.0 as well. You can do this by creating an app config file for SeqEdit.exe.
Without going into too many details, just create a file named "SeqEdit.exe.config" and put the following text in it:
<configuration>
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
</configuration>
Then place this file in the same directory as SeqEdit.exe. I believe we have an article explaining this in more detail. I'll try and find it. Your other option is to target an earlier framework with your .NET assemblies (this is just a project setting in VS 2010).

Reading one line from a text file into an array

i want to read one line from a text file into an array, and then the next line into a different array. both arays are type string...i have this:
public static void readAndProcessData(FileInputStream stream){
     InputStreamReader iStrReader = new InputStreamReader (stream);
     BufferedReader reader = new BufferedReader (iStrReader);
     String line = "";
     try{
     int i = 0;
          while (line != null){
               names[i] = reader.readLine();
               score[i] = reader.readLine();
               line = reader.readLine();
               i++;
          }catch (IOException e){
          System.out.println("Error in file access");
this section calls it:
try{
     FileInputStream stream = new FileInputStream("ISU.txt");
          HighScore.readAndProcessData(stream);
          stream.close();
          names = HighScore.getNames();
          scores = HighScore.getScores();
     }catch(IOException e){
          System.out.println("Error in accessing file." + e.toString());
it gives me an array index out of bounds error

oh wait I see it when I looked at the original quote.
They array you made called names or the other one is prob too small for the amount of names that you have in the file. Hence as I increases it eventually goes out of bounds of the array so you should probably resize the array if that happens.

Loading data from two flat files into one table

Hi All,
I want to load few fields from one file and few fields from another file and load the data into one table in the database.
For Ex: I have two flat files file1.csv and file2.csv and file1.csv containes 25 columns and file2.csv containes 12 columns, i want to load 20 columns from file1.csv and 7 columns from file2.csv into the table
how to combine the columns from both the files and load them into one table at a time?
Any help is appriciated
Thanks
R.G

Use external tables.
If using Oracle9 or higher connect both your csv with database as separate external tables and load the requited fields in new/requited table.

Loading multiple XML files into one XMLList

I am working on an app where I will load a list of recipes. Each recipe is an XML file. I would have an XML file that lists the filenames that need to be loaded. I am assuming in can use one HTTPService and loop through this list, and set the url and do myService.send() until all the xml files have been loaded and concatenated into one xml list. True?
My main question here is how do I load each XML file and add it to the same XMLList?
Assume each XML file's root tag is <recipe>. I want to create an XMLList with the root <recipes> with each <recipe> as a first child.
Thanks.

Why don't you use the Data centric workflows which will help you to deal with multiple XML files as AS objects? Something like this
1. Create a HTTPService using Data menu -> Connect to HTTPService
2. create a operation getRecipe and enter your URL example URL: http://myserver/recipe?name=recipename
3. Use Configure Return Type to tell that this method returns a Recipe class
4. Use DataBinding to bind the result of this to a DataGrid
Call the following in a loop and
recipeName = myRecipes+ // All of your recipe names, Recipe is a ArrayCollecition
Recipe.setAt(i) = Svc1.getRecipe(recipeName);
At the end you would have a Recipe[]
This is one of the ways you could work instead of having a XMLListCollection and use e4x etc. to go through your collection.
Let us know if this helps, or you are looking for something else.
Thanks
-Sunil

Loading file of BMPs into one array

Similar Messages

Maybe you are looking for