LOADS of problems with 5.1.1 Update on IPhone 4!

Gonna try and keep it fairly simple...
Checked my phone, found out there was an update, so I plugged it into the wall, downloaded the newest iTunes on my laptop(mine was a few upgrades behind) then downloaded the Software Update for my iPhone.
-First, I apparently didnt have enough battery, so I left it plugged in for half an hour before trying again.
-All went pretty smoothly... Got the new iTunes. etc.
-Check my phone an hour or so later and it tells me to plug into iTunes, so I do.
-Im then told to upgrade iTunes again, so I do, this time with the phone plugged in.
-Im then told my phone is in 'Recovery Mode' and that I must restore all the settings and cant do anything with it until I do so.
-Obviously, I do this. I last backed up a month ago, so yeah I'll loose some files, but I couldnt access them on my phone to back up - leaving me with no choice.
-Once this has run, I've now got a screen on the iPhone saying 'IPhone' with the 'Slide to Set Up' option.
-When I slide, I 'Enable Location Services' > Connect to my home Wi-Fi > Im then given the option to 'Set up as new IPhone', 'Restore from iCloud' or 'Restore from iTunes'.
-I select 'Restore from ITunes' and end up with the 'Connect to iTunes picture-thing.
-On my laptop through iTunes I restored it, dragged all of my music in, re-arranged all of my apps, and prepared to sync all my photos back onto my phone.
-I click 'Sync' and it seems to run okay, then Im told it couldnt complete the sync.
PLEASE HELP!
I only want my phone to work as it should!

chrisfromgastonia wrote:
Again, there are plenty of people giving bogus information ie. BMG Big Mouth Guy, ( Fitting )if you read the problem and understood the issue, then you wouldnt be posting android problems in the iphone forum.
Chris... Your just an idiot... plain and simple..  you have NEVER seen me post a single thing about Androids unless someone asked about it, and I told them how horrible of a phone they are... You want to talk about reading the problem and understanding the issue??  REALLY?!?!  if your so **** smart, why are you giving bogus information??  There's a thread with over 1200 replies on the issue, and your trying to tell ppl to trouble shoot something that can't be fixed... And in case you havent noticed, there have been DOZENS of ppl who have told you that your wrong, and EVEN MORE that have commented back and said your solution didnt work...

Similar Messages

  • Problem with latest OS X update.  10.10.2.   Grey screen.    .??

    Problem with 10.10.2 update.  Getting grey screen.  Have tried safe boot but got same result.

    Mac OS X- Gray screen appears during startup
    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    b. Boot drive's directory has been corrupted - Repair with Disk Utility.
    c. Critical system files are damaged or deleted - Reinstall OS X.
    d. The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Looking for a site that shows problems with windows patches or updates.

    Looking for a site that shows problems with windows patches or updates...so I know what not to install.
    Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
    that does it with expertise.
    Which forums would be best to look for such problems.
    Thanks in and advance for suggestions

    Hi,
    I agreed with Cyber and Rick.
    Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
    Although there might be some problems when installing it, Windows update is not the one to blame.
    For troubleshooting Windows updates, if needed:
    Fix Microsoft Windows Update Issues
    http://support2.microsoft.com/gp/windows-update-issues
    Best regards
    Michael Shao
    TechNet Community Support

  • I am having problems with my burst mode on my iphone 6 plus it is slower than  the facetime camera after i updated to ios 8.3 apple please fix this issue i am fed up with all your mistakes

    i am having problems with my burst mode on my iphone 6 plus it is slower than  the facetime camera after i updated to ios 8.3 apple please fix this issue i am fed up with all your mistakes

    Gerald
    If you had taken time to read the Terms of Use you agreed on joining this Community today you would have realised that Apple is not here
    neither reading nor responding on this User Community
    http://www.apple.com/feedback/

  • A problem with Nokia 5530 wirmware updating! Help!

    Hi all,
    I have meat the problem with Nokia 5530 firmware updating: updating allways finish with the message "Downloading of the variant package failed.Most probably there is non-commercial software in your device."
    Is there any solution for that problem?
    Thanks and regards,
    Alexander

    first its ok
     then
    translation:
    For a better connection please insert the usb-cable directly in to the computer and not trough a usb-hub or -keybord or a dockingstation of a laptop.
    Nokia Software Updater has tried downloading the software, but this is failed 4 times.
    Its posible that it can be caused by a bad, slow or instable internet connection.
    This failure can also occur because we have maybe a problem with our servers.
    try later again
    i tried it on 2 PCs one with vista and one with XP plz help me
    Message Edited by progunnl on 13-Mar-2009 02:50 PM

  • Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • Has ayone experienced any problems withe latest apple tv update

    who has experienced problems withe latest apple tv update???

    Welcome to the Apple community.
    There are always a few that experience some problem or other after an update. Exactly what problems are you having please.

  • Has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    has anyone else had a problem with data? after updating my phone to the new update, i have all this data, and keep getting notifications that my data is getting high. i never had this problem before.

    fair enough.  No need for any unnecessary posts either.  You issue had been addressed ad nauseum already in this forum had you bothered to search this forum (as forum etiquette would dictate) before posting.
    In any case, I hope that your problem was solved.

  • Problem with CC desktop app update

    Anybody has Problem with CC desktop app update?

    Hi boloco
    here are some soultions, which helped me out on my first trouble:
    CC desktop lists applications as "Up to Date" when not installed
    Good luck (I have new problems today which could not be solved by one of those)

  • HT5047 Having problem with the iOS7 verifying update what should I do?

    Having problem with the iOS7 verifying update what should I do?

    Several other users have reported this same problem. Unplug the charger and then replug. It should resume to 100%.
     Cheers, Tom

  • Having problem with my camera after updating 8.1.3

    having problem with my camera after updating 8.1.3.. how will you fix this

    Try Resetting your phone: hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons. If this does not work Restore your iPhone in iTunes.

  • I have a Iphone 4S and i update a new version 6.1, and i have a problem with wifi from i update this version. What is this problem? thanks Andres

    I have a Iphone 4S and i update a new version 6.1, and i have a problem with wifi from i update this version. What is this problem? thanks Andres

    Move or Copy the ENTIRE iTunes folder from the old computer or the backup of the old computer to the new computer.

  • Problem with AUTO PUBLISH nd update NEW POLICY to Client .

    To : who may concern , which really need urgent help .
    after few days of setting up the ZESM , but then i was unable to find is there any setting which can "AUTO PUBLISH " into the Client side . Without the Client need to use the manual "UPDATE POLICY " button ?
    Because , we find it that to make it silent update without the CLIENT side need to manually click the UPDATE POLICY , so i would wonder is there any way to have the AUTO UPDATE the policy from SERVER side ?
    thank alot first .
    From : NX ( which this few days has been keep on try and explore the ZESM 3.5 , 4.0 , 4.1IR )
    Which really need help in here , due to we are almost to the end of the setup server and the IT infrastructure .

    I would recommend that you READ and UNDERSTAND the Installation and Administration guides from the Documentation (somebody took the job to write those, so be kind enough to read it)
    Main Doc
    http://www.novell.com/documentation/zesm41/
    Your question is answered here:
    http://www.novell.com/documentation/...a/bnk7bdx.html
    See "Update Interval".
    Lastly, this is a public support forum, served on a best-effort basis from the community. As such, there's no guarantee that you'll get an answer, and if you get one, that works and is correct. So, if you have un urgent or important issue, go ahead an open a support ticket with Novell Technical Services in order to be served by professional support engineers backed up by the engineers who wrote the code.
    http://support.novell.com/contact/
    >>>
    From: nxgame<[email protected]>
    To:novell.support.zenworks.endpoint-security-management
    Date: 12/11/2010 3:06 pm
    Subject: problem with AUTO PUBLISH nd update NEW POLICY to Client .
    To : who may concern , which really need urgent help .
    after few days of setting up the ZESM , but then i was unable to find
    is there any setting which can "AUTO PUBLISH " into the Client side .
    Without the Client need to use the manual "UPDATE POLICY " button ?
    Because , we find it that to make it silent update without the CLIENT
    side need to manually click the UPDATE POLICY , so i would wonder is
    there any way to have the AUTO UPDATE the policy from SERVER side ?
    thank alot first .
    From : NX ( which this few days has been keep on try and explore the
    ZESM 3.5 , 4.0 , 4.1IR )
    Which really need help in here , due to we are almost to the
    end of the setup server and the IT infrastructure .
    nxgame
    nxgame's Profile: http://forums.novell.com/member.php?userid=99703
    View this thread: http://forums.novell.com/showthread.php?t=427947

  • Dear i have a problem with the fingerprint after updating to ios 7.1 when plugged in electricity works like a charm

    dear sirs.
    i am an apple customer since first iphone but right now i am having problems with fingerprint sensor after updating to ios 7.1.
    when plugged to electricity it works but when unplugged sometimes work.
    please solve this issue by a quick update and thanks.

    I have been on the phone twice today with my carrier. They reset it the first time, it worked for an hour then messed up again. They reset it a SECOND time.. It worked for 6 hours, then messed up again. I don't know if this is a software issue or what but if ANYONE has any insight, I would appreciate it greatly.

  • Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!

    Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!

    OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
    Reset Password starting from Recovery HD
    Start the computer,then press and hold down command and R keys to start into recovery partition.
    When you see the Apple logo, release the keys.
    Wait until  OS X Utilities window shows up.
    Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
    from the drop down.
    Terminal window will appear.
    Type in   resetpassword   and press enter on the keyboard.
    Leave the Terminal window open.
    Reset Password Utility window will open with Macintosh HD selected.
    Select the user account from the popup menu box.
    Enter a new password.
    Reenter the new password for the user.
    Enter a hint.
    Click the "Save" button.
    Click  in the menubar and select Restart.
    Log in.
    If Keychain dialog box appears, select “Create New Keychain”.

Maybe you are looking for