Local machine using - expecting remote machine

Any advice on this one? I did modify the security / firewall to except IChat
2009-01-04 19:42:44 -0600: No data has been received for the last 10 seconds.
Audio channel info: local machine using 10.0.1.200:16402, expecting remote machine to send to 68.179.174.46:41078
Video channel info: local machine using 10.0.1.200:16402, expecting remote machine to send to 68.179.174.46:41078

Ok,
Most Cable Modems do not router.
It means that they pass the Public IP to the Router (Or any computer that might be directly connected if you only have one).
This also means it is not doing DHCP (so no two lots of DHCP in this case most likely)
Telling us the Make and Model of the modem will help to confirm this.
Alternatively you can check if it is in this List (Very new models tend not to be included yet. They work on people sending in info, so not all devices are listed either.)
Also tell us which version and what firmware the Base Station is Running.
The set up pages for this can be accessed with Airport Utility in the Applications/Utilities folder.
This presents you with a list of the Airport Devices it can find in a list on the left.
Click on yours.
Click on the Internet icon.
This pane is essentially in two parts.
The top is how you are getting connected to the Internet.
It normally tells you the IP you are getting.
If it is the same as when you go here the modem is not routing.
At the Bottom is whether the Base Station is set to DHCP (Share an IP) to the computers (LAN).
Tell us what you find out.
If it is a Public IP you see quote it as 90.66.xxx.xxx (Or put some xxx's in somewhere).
Pic of Internet Pane with Public IP
Older firmware and Base Stations have slightly different Access methods where you get a little Pop Up window to log on by IP first.
(I don't have Pics of that at the moment)
8:04 PM Monday; January 12, 2009

Similar Messages

  • Linked server problem, its works locally but not from remote machine

    Hi,
    i am using the application NAV and have written the query in the application. am using automation variable to link to the SQL Server.
    The problem is that , the query which i have written executes only when i am working on local machine .
    I mean when i want to execute the same query from remote machine through my app Dynamics NAV then its not getting executed.
    Thanks in advance

    Depends on what you are trying to do and what security you are using.
    What error did you get?
    If you are using windows authentication then take a look at delegation
    http://www.databasejournal.com/features/mssql/article.php/3696506/Setting-Up-Delegation-for-Linked-Servers.htm
    Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

  • Can't connect to windows 7 machine using microsoft remote desktop connection

    I am unable to connect from my home network to the Windows 7 Professional machine at my office, using either Microsoft Remote Desktop Connection (2.1.1) for Mac or the open source CoRD program.
    When connected to the office network (which is running MS Small Business Server 2011 Standard) both CoRD and MS RDC will connect to my desktop machine just fine! (My MacBook Pro runs Mountain Lion.)
    From my home network, MS RDC will complain that it cannot find the Windows computer if I just use the Windows computer name. If I use the Windows machine's iPV4 address, it works on it for a minute and then tosses up this error message:
    Using the IP address of the Windows machine, CoRD just grinds away for a minute or so and then times out.
    I should add that using Internet Exporer under Parallels from home, I can get a little closer to success (after fidding around with ActiveX controls for a bit). I will get to the Windows login screen, but then I am told that my user password is wrong (which makes no sense at all)!
    Okay, geniuses, have at it, and thanks in advance!!

    The genius for Microsoft products an be found onthe Microsoft forums for their Mac software:
    http://answers.microsoft.com/en-us/mac

  • How to execute a shell script which is present in remote machine using ODI

    I have requirement of executing a batch (shell script) which is present in the remote machine.
    i have an ODI agent in remote machine as well. I have created agent locally by using the remote machine IP and port.
    I am able to test the agent successfully. But when i am executing the package using that agent it is failing with the following error
    errorODI-1226: Step Execution of the Scenario REMOTE_DEMO version 001 fails after 1 attempt(s).
    ODI-1241: Oracle Data Integrator tool execution fails.
    Caused By: oracle.odi.runtime.agent.invocation.InvocationException: HTTP/1.1 500 ODI-1423: Warning connecting to Agent localagent: work repository WORKREP1 is not bound to the master
    My Work Repository Name is : WORKREP1
    Remote Work Repository Name is:WORKREP_LOCAL.
    Could anyone please help me regarding this.
    I can't download shell script and run it locally this needs to be run on that remote machine only.
    Thanks
    senthilkumar

    This is the code.
    1. we can declare types dynamically
    2. Internal table dynamically
    3. Select querry dynamically
    just copy paste this code
    Here is the code for your question
    DATA:v_fieldname
    TYPE fieldname,
    l_PROG TYPE string,
    v_mess TYPE string,
    l_sid TYPE string,
    wa_ddfields TYPE dntab.
    DATA i_tab TYPE STANDARD TABLE OF string.
    DATA:l_str TYPE string,
    l_str1 TYPE string.
    PARAMETERS matnr type marc-matnr.
    end-of-SELECTION.
    *build the subroutine pool
    APPEND 'PROGRAM subpool.' TO i_tab.
    APPEND `LOAD-OF-PROGRAM.` TO i_tab.
    APPEND `DATA i_tab1 TYPE TABLE OF vbak.`      TO i_tab.
    APPEND `DATA l_rows TYPE i.`      TO i_tab.
    APPEND `select * into table i_tab1 from vbak.` To i_tab.
    append 'DESCRIBE TABLE i_tab1 LINES l_rows.' to i_tab.
    append 'Write :  l_rows .' to i_tab.
    GENERATE SUBROUTINE POOL i_tab NAME l_PROG
    MESSAGE v_mess
    SHORTDUMP-ID l_sid.
    IF sy-subrc = 0.
    PERFORM ('LOOP_AT_TAB') IN PROGRAM (l_PROG) IF FOUND.
    ELSEIF sy-subrc = 4.
    MESSAGE v_mess TYPE 'I'.
    ELSEIF sy-subrc = 8.
    MESSAGE l_sid TYPE 'I'.
    ENDIF.
    Edited by: vijay wankhade on Jan 1, 2009 5:34 PM
    Edited by: vijay wankhade on Jan 1, 2009 5:34 PM

  • Copying Files From a Remote Machine through "rcp" command not working.

    Hi All,
    I'm a new comer to this famous forum. I was trying to go through the PDF "Solaris Advanced User's Guide" .So in chapter 9-"Using the network" i came across "Copying Files From a Remote Machine". And the syntax was "rcp machinename:source destination" . And i got another note. It is like
    "The rcp command enables you to copy files from one machine to another. This command uses the remote machine's /etc/hosts.equiv and /etc/passwd files to determine whether you have unchallenged access privileges. The syntax for rcp is similar to the command syntax for cp.".
    But i maintained remote machine's IP address in my system's /etc/hosts file. But still i am unable to do the rcp from remote system to my system or vice versa.
    Always i am getting error message " **Connection refused**".
    Therefore please some one guide me how to perform the " Copying Files From a Remote Machine" through rcp command.
    Reghards
    Kartik

    Hi
    The inconvenience of using scp is that you have to type the password every time you stablish a connection. You can work around this, adding a key into the remote hosts_allow file. This implies in more maintenance.
    From the rcp man page:
    +rcp does not prompt for passwords. It either  uses  Kerberos authentication which is enabled through command-line options or your current local user name must exist on  hostname  and allow remote command execution by rsh(1).+
    From the rsh man page:
    + If you omit command, instead of executing a single command, rsh logs you in on the remote host using rlogin(1).+
    By default, rlogin is disabled on Solaris 10
    [SunOS 5.10/bash] root@wgtsinf01:/store/sun/operating-systems
    # svcs -a|grep -i rlog
    disabled       May_11   svc:/network/login:rloginSo, to use rcp you have to enable the rlogin service and set up all the configuration files. Particularly, as already suggested, I too suggest you to use scp. :)
    Cheers
    -- Andreas
    Edited by: Bank_Of_New_Zealand on 15/06/2009 13:09

  • ODM not displaying system objects from remote machine

    Hi,
    When I connect to OID using ODM in the local machine, I was able to see the system objects. It seems everything is working. But when I access using a remote machine with same userid(orcladmin), I was able to connect to the machine but I cant see the system objects. Only menu available is Operation & crate objects which are under this menu.
    Any hints!!!
    Thanks

    Hi,
    Have a look:
    http://blogs.technet.com/b/askperf/archive/2012/04/18/task-scheduler-error-a-specified-logon-session-does-not-exist.aspx
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/a7853ac3-6c48-4615-896a-e306067ab804/net-use-via-powershell-returning-a-specified-logon-session-does-not-exist-it-may-already-have-been?forum=winserversecurity
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • Since upgrading to OSX 10.6.8, I am unable to use scp on a remote machine to copy files into my iMac.

    Any suggestions?
    However, I can use scp to copy files out from my iMac (10.6.8) .
    I can ssh into the iMac OK.
    I created a .profile in my iMac home directory with the single line "export TERM=xterm-color".
    This makes a difference to how scp behaves when attempting to copy into the iMac, but it still fails.
    Thanks in advance for any help.  Peter R
    Here is the scp debug output (on the remote machine that I'm copying a file from, to the iMac):
    ===
    Executing: program /usr/bin/ssh host molika.ucsd.edu, user prowat, command scp -v -t Desktop/FromPelican/Outs201201.pdf
    Sun_SSH_1.1.3, SSH protocols 1.5/2.0, OpenSSL 0x0090704f
    debug1: Reading configuration data /etc/ssh/ssh_config
    debug1: Rhosts Authentication disabled, originating port will not be trusted.
    debug1: ssh_connect: needpriv 0
    debug1: Connecting to molika.ucsd.edu [137.110.243.133] port 22.
    debug1: Connection established.
    debug1: identity file /home/nona/.ssh/identity type -1
    debug1: identity file /home/nona/.ssh/id_rsa type -1
    debug1: identity file /home/nona/.ssh/id_dsa type -1
    debug1: Remote protocol version 1.99, remote software version OpenSSH_5.2
    debug1: match: OpenSSH_5.2 pat OpenSSH*
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-Sun_SSH_1.1.3
    debug1: use_engine is 'yes'
    debug1: pkcs11 engine initialized, now setting it as default for RSA, DSA, and symmetric ciphers
    debug1: pkcs11 engine initialization complete
    debug1: Failed to acquire GSS-API credentials for any mechanisms (No credentials were supplied, or the credentials were unavailable or inaccessible
    Unknown code 0
    debug1: SSH2_MSG_KEXINIT sent
    debug1: SSH2_MSG_KEXINIT received
    debug1: kex: server->client aes128-ctr hmac-md5 none
    debug1: kex: client->server aes128-ctr hmac-md5 none
    debug1: Peer sent proposed langtags, ctos:
    debug1: Peer sent proposed langtags, stoc:
    debug1: We proposed langtags, ctos: i-default
    debug1: We proposed langtags, stoc: i-default
    debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
    debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
    debug1: dh_gen_key: priv key bits set: 124/256
    debug1: bits set: 1007/2048
    debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
    debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
    debug1: Host 'molika.ucsd.edu' is known and matches the RSA host key.
    debug1: Found key in /home/nona/.ssh/known_hosts:1
    debug1: bits set: 1043/2048
    debug1: ssh_rsa_verify: signature correct
    debug1: newkeys: mode 1
    debug1: set_newkeys: setting new keys for 'out' mode
    debug1: SSH2_MSG_NEWKEYS sent
    debug1: expecting SSH2_MSG_NEWKEYS
    debug1: newkeys: mode 0
    debug1: set_newkeys: setting new keys for 'in' mode
    debug1: SSH2_MSG_NEWKEYS received
    debug1: done: ssh_kex2.
    debug1: send SSH2_MSG_SERVICE_REQUEST
    debug1: got SSH2_MSG_SERVICE_ACCEPT
    debug1: Authentications that can continue: publickey,keyboard-interactive
    debug1: Next authentication method: publickey
    debug1: Trying private key: /home/nona/.ssh/identity
    debug1: Trying private key: /home/nona/.ssh/id_rsa
    debug1: Trying private key: /home/nona/.ssh/id_dsa
    debug1: Next authentication method: keyboard-interactive
    *** Password requested & supplied
    debug1: Authentication succeeded (keyboard-interactive)
    debug1: fd 5 setting O_NONBLOCK
    debug1: fd 6 setting O_NONBLOCK
    debug1: fd 7 setting O_NONBLOCK
    debug1: channel 0: new [client-session]
    debug1: send channel open 0
    debug1: Entering interactive session.
    debug1: ssh_session2_setup: id 0
    debug1: channel request 0: env
    debug1: Sending command: scp -v -t Desktop/FromPelican/Outs201201.pdf
    debug1: channel request 0: exec
    debug1: channel 0: open confirm rwindow 0 rmax 32768
    ~
    debug1: channel 0: read<=0 rfd 5 len 0
    debug1: channel 0: read failed
    debug1: channel 0: close_read
    debug1: channel 0: input open -> drain
    debug1: channel 0: ibuf empty
    debug1: channel 0: send eof
    debug1: channel 0: input drain -> closed
    debug1: channel 0: write failed
    debug1: channel 0: close_write
    debug1: channel 0: output open -> closed
    debug1: channel 0: rcvd eof
    debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
    debug1: channel 0: rcvd close
    debug1: channel 0: almost dead
    debug1: channel 0: gc: notify user
    debug1: channel 0: gc: user detached
    debug1: channel 0: send close
    debug1: channel 0: is dead
    debug1: channel 0: garbage collecting
    debug1: channel_free: channel 0: client-session, nchannels 1
    debug1: fd 0 clearing O_NONBLOCK
    debug1: fd 1 clearing O_NONBLOCK
    debug1: fd 2 clearing O_NONBLOCK
    debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.9 seconds
    debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
    debug1: Exit status 0

    On looking at the secure.log on the iMac with OSX10.6.8, I see these entries at each attempt to scp into the iMac:
    Dec 29 11:06:20 molika sshd[7248]: in pam_sm_authenticate(): Failed to determine Kerberos principal name.
    Dec 29 11:06:26 molika sshd[7246]: Accepted keyboard-interactive/pam for prowat from 137.110.243.132 port 35571 ssh2
    Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 created
    Dec 29 11:06:26 molika com.apple.SecurityServer[26]: Session 0x236a14 attributes 0x20
    Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 dead
    Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Killing auth hosts
    Dec 29 11:06:27 molika com.apple.SecurityServer[26]: Session 0x236a14 destroyed
    I don't know what to make of this.
    Peter R

  • Not able to access database from a remote machine using SQL Server Management Studio

    Hi,
    I have a DB_BOX with SQL Server 2008 R2 installed. I can access the databases on the local machine using SQL Server Management Studio but it is not accessible from other machines, though the machines are in same domain.
    I have remote enabled on SQL Server box, TCP enabled, firewall off. I checked with IP Address too, all SQL Server services are running.
    The SQL Server log shows the message
    The requested service has been stopped or disabled and is unavailable at this time. The connection has been closed.
    I get the below message in SSMS from remote machine.
    Details of error message are
    ===================================
    Cannot connect to DB_BOX.
    ===================================
    A connection was successfully established with the server, but then an error occurred during the login process. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) (.Net SqlClient Data Provider)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=64&LinkId=20476
    Server Name: DB_BOX
    Error Number: 64
    Severity: 20
    State: 0
    Program Location:
       at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
       at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
       at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
       at System.Data.SqlClient.TdsParserStateObject.ReadByte()
       at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
       at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
       at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
       at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
       at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
       at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
       at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
       at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()

    Sorry, missed the message from the errorlog in the original post. You shouldn't have included that big .Net dump that hid the important facts. :-)
    My first Google attempt on that message (which I have never seen before) suggests that the TCP Enpoint is stopped, so try this:
    ALTER ENDPOINT [TSQL Default TCP]
    STATE=STARTED;
    Erland Sommarskog, SQL Server MVP, [email protected]
    This solves the problem. Thanks...

  • Steps to setup and configure Node Manager on local and remote machine

    Hello,
    I am using WLS 10.3 on Windows.
    I have two machines, One cluster and two managed servers (one on each machine) created under a domain. I have used configuration wizard to create the domain.
    I have gone through documents on Node Manager and found what to configure. But I have not found when to configure. In other words I want to know what is the sequence of steps if I have to set Node Manager on my local machine (in which domain exists) and on remote machine.
    Please let me know the sequence of steps I need to follow to set and configure the Node Manager on local and remote machine. I want to use Java Node Manager (not the Script node manager).
    Thanks,
    Sanjay

    Hello,
    Ok, let me tell you what I have done till now.
    1) Installed WebLogic 10.3 on machine A (local machine, on which I have created domain and my Admin Server is running. Also Managed Server 1 is created on this machine).
    2) Installed WebLogic 10.3 on machine B (remote machine, on which Managed Server 2 will be created).
    3) On machine A I used the configuration wizard and create a domain. While creating the domain I did the following:
    i) Created two managed servers.
    ii) Created a cluster
    iii) Assigned Servers to cluster.
    iv) Created two machines.
    v) Assigned servers to machines (Admin Server and MS_1 to machine A and MS_2 to machine B).
    4) Sarted Admin Server.
    5) On the Admin Console I made some configurations for the Node Manager on Machines -> Machine A -> Node Manager. Assigned the values:
    i) Type (SSL)
    ii) Listen Address (IP_Address of machine A)
    iii) Listen Port (5556)
    6) Similarly did for Machine B.
    So till now phsically the managed server (MS_2) directory and configuration is not there on Machine B (its only configured on machine A because I created the domain on Machine A).
    Now I want install/configure/setup NM on both the machines. Start my both the managed servers using Admin Console (which will use the node managers).
    What are the sequence of steps I need to follow my task?
    Any help and suggestions are welcome with warm regards.
    Thanks,
    Sanjay

  • How to create a file on a remote machine using PrintStream

    I want to create an HTML file on a remote machine connect via LAN the path is "\\vineet\akh\" akh is folder where I want to save the HTML file. Now in PrintStream i can give only a local file. Please help how to do it

    .. You can do this in two ways!!
    1) easy way
    2) hard way
    1) EASY WAY
    .. as you know for write to a remote dir you must
    a) have shared remote dir
    b) have write permit on remote dir
    if you have point a) and b) the way to follow it's simple as the other user explained to you!!
    2) HARD WAY
    the hard way is to use RMI (Remote Method Invokation)
    i mean to create a service on a remote machine that give to you a remote method that make you write without share anything..!!!
    check it out
    http://tns-www.lcs.mit.edu/manuals/java-api-1.1beta2/guide/rmi/
    i hope i'm been clear!!
    SORRy My english!! (please)
    Alessandro

  • Creating a directory on a remote machine using a UNC path

    Hi all,
    Is it possible to create a directory on a remote machine using a UNC path such as \\Server\Share\Directory?
    If so, how would i go about this? (Sorry for the newbie question, that's exactly what I am!)
    Thanks,
    Rob

    The tables on your pages are images. Not very convenient if the visitor wants to copy the information and use it.
    Read this how to use tables :
    http://www.wyodor.net/blog/archives/2010/01/entry_297.html
    http://www.wyodor.net/blog/archives/2010/01/entry_298.html
    Samples :
    http://www.wyodor.net/mfi/Maaskant/Seabreeze.html
    http://www.wyodor.net/mfi/Maaskant/Experiment.html
    http://www.wyodor.net/mfi/roodhout/Prices.html
    And here's a non-iWeb page with a sortable table :
    http://www.wyodor.net/htmlegg/TallCard/TallAjax.html?pg=tablesorter
    Or use a database on the server with MySQL and make tables with PHP :
    http://www.google.com/search?q=create+html+table+with+data+from+mysql+database
    Here's a very simple way to do it :
    http://home.wyodor.net/w3school

  • When I try to connect to a remote machine using IPSecuritas, am getting the following error

    When am trying to connect to remote machine using IPSecuritas, I am getting the following error and hence not able to establish connection. Imported the security policy and when I start IPSec,  I get this error.
    Info     APP  IKE daemon started
    Info     APP  IPSec started
    Error    IKE  Foreground mode.
    Info     IKE  @(#)ipsec-tools CVS (http://ipsec-tools.sourceforge.net)
    Info     IKE  @(#)This product linked OpenSSL 0.9.7l 28 Sep 2006 (http://www.openssl.org/)
    Info     IKE  Reading configuration from "/Library/Application Support/Lobotomo Software/IPSecuritas/racoon.conf"
    Info     IKE  Resize address pool from 0 to 255
    Error    IKE  failed to bind to address 192.168.1.2[4500] (Address already in use).
    Info     APP  IKE daemon terminated
    Error    IKE  failed to bind to address 192.168.1.2[500] (Address already in use).
    Error    IKE  no address could be bound.
    Info     APP  IPSec terminated
    Please help me in fixing this issue. Thanks in advance!!..
    Thanks,
    RV

    Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore.  I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere?  Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

  • Creating Error log files using UTL_FILE package on a remote machine

    Database Version: 10g Release2
    OS Platform: Sun Solaris
    I have been asked to log errors to OS files rather than tables. So, i wanted to use UTL_FILE package. But the client doesn't want to store these files on the same server where the database is running(as specified in UTL_FILE_DIR). Is there a way i could get these files created on a remote machine(client).

    I believe what others are suggesting is that your stored procedure continues to log to a table and a separate process be created that runs on the machine you want the file to be created on which reads the log table and writes to a log file.
    If that is not an option, can you expose the directory on the remote machine you want to write the file to as a file share that can be mounted by the database server? If you can, you could write errors there using UTL_FILE. However, it would probably be a bad idea. If you're logging an error already, that implies that something has gone wrong. Making an error logging process dependent on a remote server being available and properly mounted with appropriate privileges at the instant the error occurs just creates more sources of failure that would prevent you from logging an error, which would prevent you from being able to debug the problem or even know it existed without a report from a user.
    Justin

  • Using MS Access as Database from Remote Machine

    Hi All
    I am trying to use MS access as Data base, I have done the following.
    1. I have Added the mdb file on a remote machines DSN.(Control Panel->Admin Tools->ODBC->System Tools)
    2. In xMII data services->Data Servers, Copied the Default IDBC Server, renamed it and updated the ServerURL as  jdbc:inetdae:<IP of Remote machine>:1433?database=<DB Name>&sql7=true.
    With these things done, I am not able to get the Data Server Accesible.
    Please correct what mistake I have made.
    Thanks and Regards
    Rupesh

    Rupesh,
    First Access is not a very good database... I would suggest using MSSQL, MySQL, or some other 'real' database. But I digress...
    The only supported way to get the data you want from Access is by... you guessed it... the <b>xMII OLEDB UDS</b>. Sure you could try the JDBC - ODBC bridge, but this seems to be shaky.
    Martin - seriously... I'm trying to get the UDSs out to all of you!

  • How to test oracle is up and running in remote machine using shell script

    Hello,
    I need help to write an linux script.
    I have a java application server running on machine 192.168.5.20 and our oracle 10g standard 1.0.2 is running on machine 192.168.5.21.
    I have found script to start oracle when computer is turned on.
    But I cannot start my application server automatically since it depends on whether oracle is up and running or not on the remote machine.
    Therefore, in case of power failure or maintenance, our client has to call us to start application server.
    I would be grateful if someone can help me "How can I write script to check oracle is up and running in machine 192.168.5.21 from machine 192.168.5.20.
    For your information, I have no oracle installed in application server. So tnsping won't work.
    What I want is when power is back, application server script automatically and tesing for oracle server is up and running. If it is up, script will start application server.
    Thanking you.

    Hi,
    It's not failover or experimental. My application server uses JBOSS and JBOSS needs database name to start up. My enviroment is LAN. My database is in different machine as I mentioned before. So In case of power failure, I need to start my application server (JBoss) manually, because I need to confirm that oracle is already running before start app server.
    I want an automated script (when power is just on) to start my application server which will wait to check if the datbase server is up I will start application server.
    The scripts given above It works if appserver and db server in the same machine (my development machine).
    But when I test the script in my production applicaiton server, It shows sqlplus command not found (my app server does not have any oracle client installed).
    About hostname yes My applicaiton server hostname is hostapp1 and dabase server hostname is hostdat1.
    Do you think Is it possible to test the script without oracle client not installed. or It has to be done writing code like java program and test using jdbc connection.
    Best regards.

Maybe you are looking for