Logging Standards and ADF Application Log File on Standalone WLS

Hi Experts,
I am using JDev - 11.1.1.5.0 and WLS - 10.3
Is ADF Logger the standard logger to be used in an ADF Application? If Yes, how to configure it?
During development I simply used "System.out.println" for log messages and I was able to see the log messages in the Integrated WLS Console in JDeveloper. Now, I am moving to deployment on Standalone WLS. Please let me know how to configure the logger to log these messages to some log file to be accessed from standalone WLS.
Thanks
Rathnam

Start with this 5 part series http://blogs.oracle.com/groundside/entry/adventures_in_adf_logging_part
http://blogs.oracle.com/groundside/entry/adventures_in_adf_logging_part1
http://blogs.oracle.com/groundside/entry/adventures_in_adf_logging_part2
http://blogs.oracle.com/groundside/entry/adventures_in_adf_logging_part3
http://blogs.oracle.com/groundside/entry/adventures_in_adf_logging_part4
For the UI
http://blogs.oracle.com/jdevotnharvest/entry/using_adf_logger_with_groovy
and For some more advanced usage
http://tompeez.wordpress.com/2011/09/23/adflogger-using-a-custom-formatter-class-to-print-log-messages/
Timo

Similar Messages

Application messages are in the system log instead of the application log

Hi SAP GURUS.
The standard output is created from the outbound delivery .
All the messages are hitting the system log instead of the application log .
This is after the upgrade from 4.6c to ECC 6.0 .
Please provide the details how to move the log to the application log since the output is the standard output (SAP provided output type ).

verzunof wrote:
Hello,
My system.log is filled with these messages, they repeat every second.
Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncReceive::waitForDMA - context not going inactive.
Jan 21 18:31:47 Maki-Mac kernel[0]: AppleFWOHCI_AsyncTransmit::waitForDMA - context not going inactive.
Do these messages indicate a problem? If so what that could be problem and the solution?
Can this contribute to the sleep/wakeup problem when iMac won't wakeup after being put to sleep manually and not sleeping according to Power Saving settings?
Thanks a lot.
verzunof wrote:
I'm not certain if those messages indicate a power issue but you can try *resetting the System Management Controller* and see if that helps. Here's how: http://support.apple.com/kb/HT1806
"The System Management Controller (SMC) is a chip on the logic board that controls all power functions for your computer. If your computer is experiencing any power issue, resetting the SMC may resolve it. The SMC controls several functions, including:
Telling the computer when to turn on, turn off, sleep, wake, idle, and so forth.
Handling system resets from various commands.
Controlling the fans."
Carolyn

I just downloaded an album but one song won't play instead a message that "This computer is not authorized" to play the song. The prompt has a log in and when I log in it tells me the computer is already authorized. What gives?

I just downloaded an album but one song won't play instead a message that "This computer is not authorized" to play the song. The prompt has a log in and when I log in it tells me the computer is already authorized. What gives? Specifically the album is Flying Lotus - Until the Quiet Comes and the song is DMT Song (feat. Thundercat). I purchased the entire album and it even played fine the first listen through.

Hi,
If you are in a country that permits redownloads, delete track and go to iTunes Store > purchased and redownload. http://support.apple.com/kb/HT2519
Jim

File not found error after log on to ADF application

Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.

Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.

EDI processing and the application log

All,
It is my understanding that when an EDI message is processed if there is more than one error the errors will be put in the application log.   If only one error it is not placed in the application log.
Does any one have any ideas why on occassion if there is one error the process will put it in the application log?
Thanks
Sandra

We discovered that if the idoc has several line item segments and they all have the same error that results in the error count being greater than one.   So the process will put the error on the application log - but it does not repeat the same error so it looks like it was only one error when in fact it was several.   For example:
the idoc has 3 line items all for GRbasedIV where the delivery is not done.
the idoc process will identify 3 errors (1 per line item missing a delivery)
the process will put the errors on the application log because the error count is greater than 1
because the error is the same only one of the 3 errors shows up on the application log.
Regards,
Sandra

Clone database with no archive log mode and downtime with new file structure

We need to clone database with following business requirements :
No downtime at all can be afford
databases are in no archive log mode
data-file locations need to be change to new mount points while cloning for space management factor
Please suggest the best possible methods for same ?

Can you post your version of oracle in 4 digits and OS for better understandig
I dont think you can move the No Archive database to a new location without shutting down.
You just want to move them to the new mount points is it?
1. How big are your datafiles are?
2.How do you backup this DB?
When you move the datafilles then it becomes inconsistent and you need redo logs and probably archive logs to be there to make the file consistent or else it would be prompting for recovery. The chances are your redolog will be overwritten and hence you wont be able to recover.
You need downtime.

Idocs and the application log

Hello there,
i have a general question. I am about to integrate idocs into an interface managing program and i wanted to know if idocs are known to use the application log for writing (error) messages.
I know they have the possiblity to do so, but i do not know if this is frequently used or even used at all. At least it is not on my system.
Thanks in advance for your answers.
Kind regards
Jonas Liebstückel

no, I am thinking this has to do with the IDOC-type - either you can flag the use of the application log somewhere in the IDOC-configuration or the processing funciton modules are doing it. I would have to dig around to find out, but so can you: just check along the WE* with MATMAS and look at the function modules that are behind the processing code ... WE41

Oracle BI and ADF application integration

Hi ,
I am trying to connect BI Presentation Service. but i am getting the following error.
Connection attempt failed.
java.lang.RuntimeException: Unable to retrieve logon token. This version requires a BI build that implements the version 7 SOAP interface. Please verify that you are using the correct BI version.
Sep 25, 2012 5:40:57 PM oracle.bi.presentation.soap.connection.impl.LogonTokenImpl
SEVERE: Perform impersonation was enabled for the BI Presentation Services SOAP connection, but there was no logged in user!
I am using Oracle BI 11.1.1.3 and Jdev 11.1.1.6.
With Regards,
WP

The report which you are trying to execute, can you see the security over there. I doubt that the security is creating a issue here while there is no relation between the BI version and ADF version.
ADF call BI using webservice only, and webservice does not have any version specific things.
--vipC

Logged out and unable to log back in

While working on my Mac the computer suddenly logged me out and I am now unable to log back in. When I try to log back on the system logs in for 1/2 seconds before kicking me out to the initial log in page and asking again for the password. I tried shutting down and restarting and safe boot mode but nothing works.
I am however able to log in the account I set up for my son (which is the one I am connecting from).
Anyone knows how to log back in the master account either directly or through my son's account?
Thanks

Hi mazde, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Let us know where that leaves us.
Is it a Filevault account?

Problem DB Trigger and ADF Application for update a field.

I again,
I have a Data Base table as following :
--Solicitudes*
id number not null,
extern_code integer,
delivery_date timestamp( 6 ),
... and more fields
And a Trigger as following :
create or replace trigger update_delivery_date
before update of on Solicitudes
for each row
begin
if ( :new.extern_code = 9 ) then -- I need update the "delivery_date" to the current date and timestamp
select systimestamp into :new.delivery_date from dual;
end if;
end;
The trigger works fine in the DB, but when I update the 'Solicitudes' data base table through the ADF Application, the 'delivery_date' field is updated to different current systimestamp , for example suppose right now is : 19-JUN-*2012** 10.45.30.773000000 PM -04:00 , it field should be update to this date, but it is not update to that date, it is update to : 10-DEC-*1989* 10.45.30.773000000 PM -04:00.
Why is this ?
I put in the SQL Developer's query editor : select systimestamp from dual; and it show me the correct date and time.
That problem occurs only when I update the table through my ADF Application.

Marco,
I don't see any issue with ADF in this. Just tried with a dummy table created with similar structure and tried updating it (have a similar trigger as well). It updated with proper timestamp (tried from SQL Developer, AppModule Tester and in jspx page - all same result).
Can you check the system date on the machine where your DB is hosted. I guess you are using different database for testing the query and the app is using a different db.
If not, try creating a simple testcase (as I mentioned in the first line) and see if you are able to reproduce the issue.
-Arun
P.S : I tried this in 11.2.0.1 DB & JDev 11.1.2.0.0

HAD A BALANCE OF $18 ACCIDENTLY LOGGED OUT AND WHEN I LOGGED BACK IN MY BALANCE HAS BEEN REMOVED??? WHERE IS MY MONEY

WHY HAS MY BALANCE OF MY GIFT CARD BEEN REMOVED FROM MY ACCOUNT , I HADNT EVEN USED IT ALL SILL A BALNCE OF $18 LEFT ??/

We are fellow users here on these user-to-user forums, we won't know. Did you have any pre-orders or auto-renewing subscriptions due ? Have you checked your account's purchase history : http://support.apple.com/kb/HT2727 ? If you can't see where it went (and you've tried logging out and back in again) then try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/
(For future info typing all in capitals is considered shouting, makes posts difficult to read, and may mean that people are less likely to reply.)

Pagelets not rendering in Fusion ADF application pages deployed on standalone weblogic server

HI All,
I am creating a Pagelet Producer connection, and dragging a pagelet on the page as iframe, with height auto. When I run the application in the integrated weblogic server, I am able to see the pagelet. However when I deploy the application on the standalone weblogic server, then the pagelet isn't rendered.
I am using fusion ADF application 11.1.1.7 and standalone weblogic server v 10.3.6.
Thanks in advance for yours assistance. Please I need a solution for this uregently. DO let me know, if you need any additonal information.
Regards,
Nikhil Mahto

Sorry for the wrong infromation. The correct scenario is:
I have an ADF application, in which I have a Pagelet producer connection, pages and taskflows. This ADF application is inlcuded in a Webcenter Portal Framework application, as a shared library. When the WCF application is deployed on the Weblogic server, the pagelets don't appear on the pages.
I tried the FRAMEBUSTING context parameter to never but it didn't help.
Regards,
Nikhil Mahto

HT5622 Can you sign out of your Apple ID if your device is getting sold? I don't want the person to log in and for all my files and data to be restored.

Are you able to log out of your apple if in order to sell your device? I don't want my photos etc to be restored.

Follow the directions here:
http://support.apple.com/kb/HT5661

When I go to my iMessage it has me log in, and I never logged out, but it takes me to where it says verifying and then will take me back to where I sign in with it saying nothing is wrong. how can I fix this?

When I go to my iMessage, it has me long in. I never logged out, but I can get to the part where it says "next" and I click that. then it will say verifying, but then take me back to the log in page and it doesn't tell my my username or password is wrong. how can I fix this?

iOS: Troubleshooting FaceTime and iMessage activation
FaceTime, Game Center, Messages: Troubleshooting sign in issues

4948 Logging events and exporting the logs

Good Day All
I have been tasked with finding out how to get a 4948 to log basically all events and have it off load to a box in which we can archive these logs. This is for PCI compliance and is new to me. I suppose my question is for the 4948 to log all events on the ports and it is only 3 being used. What is the CLI structure and is there a product that is available to load on a win dows boix I can direct these logs to to immediately be archived?
Scott Cummins

Scott,
You configure and enable syslog.

Logging Standards and ADF Application Log File on Standalone WLS

Similar Messages

Maybe you are looking for