Logic required to count no of fecodes for a car

Hi,
    Kindly help me in deriving a logic for the below issue.
    I have 3 internal tables with data...
    itab1 contains 1 field (FECODE) and values are for eg: 11, 12, 13, 14, 15....
    itab2 contains 1 field (CARTYPE) and values are for eg: PA-1, PA-2, PA-3,PA-4,PA-5
    itab3 contains 2 fields(CARTYPE AND FECODE) values for eg : PA-1, 11; PA-1, 11; PA-1, 12; PA-1,13
    PA-2, 11; PA-2,14; PA-3,12; PA-3,15; PA-3,15 ...So on which means it contains duplicate records as well
TASK: my task is to count the no of occurance of FECODE for CARTYPES
SO THE RESULT SHOULD BE FECODE, CARTYPE, COUNT
for eg: IT WOULD BE: PA-1, 11, 2 :     PA-1,12,1    : PA-1,13,1 , PA-2,11,1...........PA-3,15,2.
You can use only the 3rd itab or combination or all of the itabs
Kindly help.
Your help is highly appreciated
Thanks and regards
Sujeer

Hi
Create a itab4 with similar structure of itab3 and with one extra field count of type i and change FECODE to character type.
loop at itab3.
itab4-cartype = itab3-cartype.
itab4-fecode = itab3-fecode.
itab4-count = 1.
collect itab4.
endloop.
your itab4 will have count
Regards
Madhan

Similar Messages

Logic required for Sort in ALV

Hi All,
I am dowloding the ALV report layout in excel sheet thorough mailing functionality.
I want to implenemnt the dynamic sort. Here I am writing this.but i want the logic for below code.
 CALL FUNCTION 'LT_DBDATA_READ_FROM_LTDX'
 EXPORTING
I_TOOL = 'LT'
 IS_VARKEY = W_VARKEY_EU
 TABLES
 T_DBFIELDCAT = IT_DBFIELDCAT_EU
 T_DBSORTINFO = IT_DBSORTINFO
 T_DBFILTER = IT_FILTER_LAYOUT
 T_DBLAYOUT = IT_DB_LAYOUT.
LIT_DBSORTINFO[] = IT_DBSORTINFO[].
 SORT LIT_DBSORTINFO[] BY KEY1.
 DELETE ADJACENT DUPLICATES FROM LIT_DBSORTINFO[] COMPARING KEY1.
 LOOP AT LIT_DBSORTINFO[].
 CLEAR: LW_SPOS,
 LW_UP,
 LW_DOWN,
 LW_SUBTOT,
 LW_COMP,
 LW_EXPA,
 LW_GROUP.
 CLEAR IT_DBSORTINFO[].
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'SPOS'.
 IF SY-SUBRC = 0.
 LW_SPOS = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'UP'.
 IF SY-SUBRC = 0.
 LW_UP = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'DOWN'.
 IF SY-SUBRC = 0.
 LW_DOWN = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'SUBTOT'.
 IF SY-SUBRC = 0.
 LW_SUBTOT = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'COMP'.
 IF SY-SUBRC = 0.
 LW_COMP = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'EXPA'.
 IF SY-SUBRC = 0.
 LW_EXPA = IT_DBSORTINFO-VALUE.
 ENDIF.
 CLEAR IT_DBSORTINFO.
 READ TABLE IT_DBSORTINFO WITH KEY
 KEY1 = LIT_DBSORTINFO-KEY1
 PARAM = 'GROUP'.
 IF SY-SUBRC = 0.
 LW_GROUP = IT_DBSORTINFO-VALUE.
 ENDIF.
 LOOP AT IT_ALV_DATA FROM W_LOOP_FROM_EU TO W_LOOP_TO_EU.
 LW_TABIX = SY-TABIX.
 READ TABLE IT_FIELDCAT INTO LW_FIELDCAT WITH KEY
 FIELDNAME = LIT_DBSORTINFO-KEY1.
 IF SY-SUBRC = 0.
 ASSIGN COMPONENT SY-TABIX OF
 STRUCTURE IT_ALV_DATA TO <LFS>.
 IF SY-SUBRC = 0.
 CLEAR LW_CHAR.
 LW_CHAR = <LFS>.
 IF LW_SPOS= 'SPOS'.
 LOGIC Required
 ENDIF.
 ELSEIF LW_OPTION = 'DOWN'.
 LOgic required
 ENDIF.
 ENDIF.
 ENDLOOP.
 ENDLOOP.
regards,
Ajay reddy

Hai,
Let
1)general data
2)all customers
3)company code data
4)sales organization data
are the check box names,Then
Just use the piece of code below:
IF general data = 'X'.
 COUNT = COUNT + 1.
ENDIF.
IF all_customers = 'X'.
 COUNT = COUNT + 1.
ENDIF.
IF company_code_data = 'X'.
 COUNT = COUNT + 1.
ENDIF.
IF sales_organization_data = 'X'.
 COUNT = COUNT + 1.
ENDIF.
Now check whether more than one Check Boxes are selected or not
IF COUNT GT 1.
"* Do the oprations what ever you want here
ENDIF.
Reward points if it helps you.
Regds,
Rama chary.Pammi

Error: The number of configured copies for database 'DB-1' (1) is less than the required redundancy count (2).

Hello , I think the below event alert 4113 is very common and is due to that only one database copy is present in DAG but is there any way we can stop this alert for the
specific database.
The message tells that there is only one copy of the database - create another copy and the warning message will go away but
we do not want to create another copy. So is there any way we can stop this event getting generated.
Database redundancy health check failed.
Database copy: DB-1
Redundancy count: 1
Error: The number of configured copies for database 'DB-1' (1) is less than the required redundancy count (2).
Name Status RealCopyQueu InspectorQue ReplayQueue CIState
 e
ue
DB-1\ Mounted 0 0 0
Healthy
MAILSRV2
===============
Full Status
===============
Identity : DB-1\MAILSRV2
Name : DB-1\MAILSRV2
DatabaseName : DB-1
Status : Mounted
MailboxServer : MAILSRV2
ActiveDatabaseCopy : MAILSRV2
ActivationSuspended : False
ActionInitiator : Unknown
ErrorMessage :
ErrorEventId :
ExtendedErrorInfo :
SuspendComment :
SinglePageRestore : 0
ContentIndexState : Healthy
ContentIndexErrorMessage :
CopyQueueLength : 0
ReplayQueueLength : 0
LatestAvailableLogTime :
LastCopyNotificationedLogTime :
LastCopiedLogTime :
LastInspectedLogTime :
LastReplayedLogTime :
LastLogGenerated : 0
LastLogCopyNotified : 0
LastLogCopied : 0
LastLogInspected : 0
LastLogReplayed : 0
LogsReplayedSinceInstanceStart : 0
LogsCopiedSinceInstanceStart : 0
LatestFullBackupTime :
LatestIncrementalBackupTime :
LatestDifferentialBackupTime :
LatestCopyBackupTime :
SnapshotBackup :
SnapshotLatestFullBackup :
SnapshotLatestIncrementalBackup :
SnapshotLatestDifferentialBackup :
SnapshotLatestCopyBackup :
LogReplayQueueIncreasing : False
LogCopyQueueIncreasing : False
OutstandingDumpsterRequests : {}
OutgoingConnections :
IncomingLogCopyingNetwork :
SeedingNetwork :
ActiveCopy : True
Thanks

That regex looks odd to me. I assume you have databases with names like "Mailbox Database <ten digit number>" (standard Exchange default name, in other words), "ABC-DB" and "HOME-DB". If this is the case, wouldn't
you want "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"? THis works if I run it from a prompt:
[PS] C:\Scripts>"Mailbox Database 0123456789" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
True
[PS] C:\Scripts>"Mailbox Database 123456789" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
False
[PS] C:\Scripts>"Mailbox Database 12345678910" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
False
[PS] C:\Scripts>"HOME-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
True
[PS] C:\Scripts>"ABC-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
True
[PS] C:\Scripts>"ABCD-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
False
[PS] C:\Scripts>"HOM-DB" -match "(?:Mailbox Database \d{10}$|^ABC-DB$|^HOME-DB$)"
False
I find it's easiest to test RegEx's from the prompt this way. If the above isn't your goal, let us know, and we'll see if we can come up with something better.

How to get logical JTextArea line count

Hi,
I would like to get the logical JTextArea line count. The existing
getLineCount method returns the line count based on "\n", which
is not what I want.
Any ideas?
Thanks,
Pin

I found the following solution in the forum and it works.
I haven't tested for all cases though...
public static int getLineCount (JTextArea _textArea)
boolean lineWrapHolder = _textArea.getLineWrap();
_textArea.setLineWrap(false);
double height = _textArea.getPreferredSize().getHeight();
_textArea.setLineWrap(lineWrapHolder);
double rowSize = height/_textArea.getLineCount();
return (int) (_textArea.getPreferredSize().getHeight() / rowSize);
Thanks,
Pin

ALV ...Logic required

Hi every body,
 I have one requirement like an alv report will display
output which contains a material number.
If i click On the material number it shud go to MM03...Accounting view
Logic required for this.I am a beginner ...Plz help me...
Thanks in advance.
Message was edited by: raja gurrala

Hi,
See the code sample,
INCLUDE <icon>.
* Predefine a local class for event handling to allow the
* declaration of a reference variable before the class is defined.
CLASS lcl_event_receiver DEFINITION DEFERRED.
DATA : o_alvgrid TYPE REF TO cl_gui_alv_grid ,
 o_dockingcontainer TYPE REF TO cl_gui_docking_container ,
 o_eventreceiver TYPE REF TO lcl_event_receiver,
 wa_layout TYPE lvc_s_layo ,
 wa_variant TYPE disvariant.
CONSTANTS : c_a(1) TYPE c VALUE 'A' , " All Layouts
 c_x(1) TYPE c VALUE 'X'.
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
 CLASS-METHODS:
* Hot Spot Click
 handle_hotspot
 FOR EVENT hotspot_click OF cl_gui_alv_grid
 IMPORTING e_row_id
 e_column_id
 es_row_no,
* Double Click
handle_double_click
 FOR EVENT double_click OF cl_gui_alv_grid
 IMPORTING e_row
 e_column
 es_row_no,
ENDCLASS. "lcl_event_receiver DEFINITION
* Implementation
CLASS lcl_event_receiver IMPLEMENTATION.
*& Method handle_hotspot
* This method is called when the user clicks on a hotspot to drill down.
* The following types are exported from the ALV
* LVC_S_ROW
* LVC_S_COL
* LVC_S_ROID
METHOD handle_hotspot.
* The hotspot processing coded in the form below.
 PERFORM f9900_handle_hotspot USING e_row_id
 e_column_id
 es_row_no.
ENDMETHOD. "handle_hotspot
*& Method handle_double_click
METHOD handle_double_click.
* The double click processing should be coded in the form below.
 PERFORM f9901_handle_double_click USING e_row
 e_column
 es_row_no.
ENDMETHOD. "HANDLE_DOUBLE_CLICK
FORM f9900_handle_hotspot USING p_row_id
 p_column_id
 p_row_no.
*Read internal table for proper value.
READ TABLE i_output
 INDEX p_row_id
 INTO wa_output.
* Call the transaction MMBE
SET PARAMETER ID 'MAT' FIELD wa_output-matnr.
CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN .
ENDFORM. " f9900_handle_hotspot
*& Form f9901_handle_double_click
* Double Click
FORM f9901_handle_double_click USING p_row
 p_column
 p_row_no.
READ TABLE i_output INDEX p_row INTO wa_output.
CASE p_column.
 WHEN 'MATNR'.
 IF NOT wa_output-matnr IS INITIAL.
 SET PARAMETER ID 'MAT' FIELD wa_output-matnr.
 CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN .
 ENDIF.
ENDCASE.
ENDFORM. " f9901_handle_double_click
U can use either hot spot or double click event.
If u r using hotspot set the hotspot = 'X' in fieldcatalog.
Hope this helps.
OR another method without oops concept
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
data:lv_matnr LIKE v_mmim_lc-matnr, "Material
read table i_output into w_output index rs_selfield-tabindex.
lv_matnr = w_output-matnr.
SET PARAMETER ID 'MAT' FIELD lv_matnr.
CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN .
Clear: lv_matnr.
ENDFORM.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER =
* I_BUFFER_ACTIVE = ' '
 i_callback_program = v_repid
 i_callback_pf_status_set = 'SET_PF_STATUS'
 i_callback_user_command = 'USER_COMMAND'
 i_background_id = 'ALV_BACKGROUND'
 IS_LAYOUT = I_LAYOUT
 it_fieldcat = i_fieldcat "field catalog
 I_SAVE = 'A'
 IS_VARIANT = G_VARIANT
 TABLES
 t_outtab = i_output "output table
 EXCEPTIONS
 program_error = 1
 OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Kindly reward points if this helps u, revert back with queries.
Message was edited by: Judith Jessie Selvi

Script to count number of emails for multiple users

I am needing a little help with my script. I have this working if I use just a single email address. I need to add a list of 8 emails addresses for this to scan. How would I modify this to send 1 email for all 8 users?
I have seen scripts that make a html file that displays everything in a nice table but those are ran against all users in exchange and I only needs this for a group of 8 users.
Add-PSSnapin Microsoft.Exchange.Management.PowerShell.E2010
#Powershell Garbage
$nl = [Environment]::NewLine
#Mailbox to gather stats on
$mailbox= "[email protected]"
#Get todays date twice
$startDate=Get-Date
$endDate=Get-Date
#Subtract 1 day from todays date (report ending day) and 7 days from todays date (report starting day)
$startDateFormatted=$startDate.AddDays(-7).ToShortDateString()
$endDateFormatted=$endDate.AddDays(-1).ToShortDateString()
#Who to send the e-mail report to.
#Multiple e-mail addresses should be in this format "<[email protected]>, <[email protected]>"
$emailFrom = "[email protected]"
$emailTo = "[email protected]"
$subject = "Weekly e-mail report for $mailbox for $startDateFormatted - $endDateFormatted"
$smtpServer = "mail.domain.com"
# Sent e-mails
$sendCount = Get-TransportService | Get-MessageTrackingLog -Start "$startDateFormatted 00:00:00" -End "$endDateFormatted 23:59:59" -Sender $mailbox -resultsize unlimited | select-object -unique MessageId
# Received e-mails - This works but not on generic accounts
$receiveCount = Get-TransportService | Get-MessageTrackingLog -Start "$startDateFormatted 00:00:00" -End "$endDateFormatted 23:59:59" -Recipients $mailbox -resultsize unlimited | select-object -unique MessageId
$sendCountString = $sendCount.count
$receiveCountString = $receiveCount.count
$body = "Mailbox stats for: $mailbox $nl
Report date range: $startDateFormatted 00:00:00 - $endDateFormatted 23:59:59 $nl
Total e-mails sent: $sendCountString $nl
Total e-mails received: $receiveCountString"
$smtp = new-object Net.Mail.SmtpClient($smtpServer)
$smtp.Send($emailFrom, $emailTo, $subject, $body)

Could you elaborate a little bit more? I have not done a lot with powershell in exchange.
Would this be correct?
$mailbox= "[email protected]"
for each ($mailbox in $mailboxes)
#Get todays date twice
$startDate=Get-Date
$endDate=Get-Date
etc.

I recently got my ipod replaced and i have its serial number. now i used to play a game on it which requires me to have its UDID for account transfer so how do i get its UDID when i dont have the ipod now. i have a new one now.

i recently got my ipod replaced and i have its serial number. now i used to play a game on it which requires me to have its UDID for account transfer so how do i get its UDID when i dont have the ipod now. i have a new one now.

I would try contacting Apple.
http://www.apple.com/support/ipodtouch/contact/

Unable to get the row count of supplier site for each supplier

Hi,
In the sourcing module, suppliers page is having an advanced table in which there is a field 'supplier' and another filed 'supplier sites' (supplier field is of type picklist).Now, how can i get the count of 'supplier sites' for each supplier???

Hi sumit,
Thanks for the reply, can u please help in writing the code to loop through the VO...
I was trying to get the first row and then finding the count of supplier sites, but in each iteration of for loop(for each row) i am getting the same count value for each and every row...
Code :
int j=vo.getrowcount();//count of no. of rows
for (int i=0;i<j;i++)
row=(xxVORowImpl)rowsetiterator.getRowAtRangeIndex(1);
int a=am.getSupplierSitesVO.getRowCount();//this is the view object in the pick list
oapagecontext.writeDiagnostics(this,"value of a is :"+a,1);
this code is giving row count of last row of supplier.
How to get the count for each and every row of supplier sites ?
Thanks.

Acrobat 7 requires admin password at every launch for non admin users?

acrobat 7 requires admin password at every launch for non admin users?
any one with a solution or similar problem?
thanks for any help.

I've been avidly following all of the threads regarding this issue...yet none of the solutions have worked for me. I've got 11 Mac users that do not use the Creative Suite..only Acrobat, Quark, etc. I've tried installing and re-installing through both Admin and User accounts, I've tried the AdobeBib XML change, I've tried enabling Root and installing, changing permission on the Acrobat folder, etc. all to no avail. I still get asked for Admin Authentication every time Acrobat and Distiller are opened (except on the Admin account side). This is happening on one particular Mac (G4, 1GB Ram, OS 10.4.3) for both Acrobat Standard 6 and 7 as well. The biggest issue that also happens in tandem with the Acrobat installs is the inability to print from Quark. I get the following error when printing: "The process "pictwpstops" terminated unexpectedly on signal 6." Because of the necessity to print Quark documents, I have uninstalled all Acrobat on the machines until we can get a fix. This resolves the printing problem with Quark. The only option left is to set up all users as Admin accounts - which I really do not want to do. Any other suggestions out there? I've got more information available if needed.

Count characters in Word for Mac

Hi Guys, does sb know how can I count characters in Word for Mac? Pls help me... THX a lot!

If you select the text you want a count of (or if you want the entire document, you can just leave nothing selected) and then go to the Tools menu and select Word Count you will get a dialog that includes the character count.
I am using Word 2011, other versions may vary.

How to find the count of tables going for fts(full table scan in oracle 10g

HI
how to find the count of tables going for fts(full table scan) in oracle 10g
regards

Hi,
Why do you want to 'find' those tables?
Do you want to 'avoid FTS' on those tables?
You provide little information here. (Perhaps you just migrated from 9i and having problems with certain queries now?)
FTS is sometimes the fastest way to retrieve data, and sometimes an index scan is.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:9422487749968
There's no 'FTS view' available, if you want to know what happens on your DB you need, like Anand already said, to trace sessions that 'worry you'.

How to get count from new enhanced for loop

Is there a better way to determine the count when new enhanced for loop is used as follows:
String[] test = new String[]{"1","2","3"};
int count = 0;
for(String i: test)
count++;
system.out.println("count: "+count);
}

There are cases where I need to use the count inside
the for loop. I can keep track of the count by using
the increment. But, then I would rather using the old
for loop. Go ahead and use it. Are you under the assumption that the old form should be avoided?
There is no saving in term of efficiency and readability.If there is any added efficiency in the "for each" form of the loop, it is on the micro level, and you would never notice it.
As far as readability, look at some of the crazy solutions you've been given to avoid the general for loop, then reconsider which is more readable.

We have a requirement to print the w2 forms for employees using java application, how can i implement this. Please give some suggestion.

We have a requirement to print the w2 forms for employees using java application, how can i implement this. Please give some suggestion.

Anyone any ideas to help please?

Requirements to work on Web DynPro for ABAP

hi all,
what is it required to work on Web DynPro for ABAP. i have got ECC 5.0 installed in my system but i dont find "WebDynpro Comp/Intf" under the "Repository Browser" in SE80(ABAP WorkBech).
How should i proceed further??
waiting for replies...
Regards,
Ajay

Hi,
for Web Dynpro ABAP you need NW2004s and AS ABAP, see http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm
Regards, Heidi

Hello, my email is connected to Lotus Notes. When I updated my iPad to iOS 6, it REQUIRED that I have a password for the iPad or else my email wouldn't work or synchronize with Lotus Notes (on my work laptop). This is really frustrating, please help.

Hello, my email is connected to Lotus Notes. When I updated my iPad to iOS 6, it REQUIRED that I have a password for the iPad or else my email wouldn't work or synchronize with Lotus Notes (on my work laptop). This is really frustrating, because I cannot disable the password under General<Passcode. Thanks!

This would almost certainly be a setting that is being enforced by your company. You'll need to talk to them about this.
Regards.

Logic required to count no of fecodes for a car

Similar Messages

Maybe you are looking for