Logical standby database keeps displaying ORA-16768

I have a logical standby database setup on a remote host to accept cascaded logs from a physical standby. Everything was working fine until yesterday when I get the above error and log apply services stopped. When I go into Grid Control to Data Guard I see the error and it displays the failed SQL statement which is a create index statement. I have the option of clicking the SKIP button. When I click SKIP it appears to have processed it as the error goes away but then a few minutes later the error comes back, log apply stops and the failed SQL statement is the same create index statement. I guess the Skip doesn't mean Skip, it means Retry... My question is how do I get past this? Logs have been piling up.

Hi,
Ok I applied :
SQL> ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Database altered.
SQL> alter database start logical standby apply immediate;
Database altered.
SQL>
And now I received this :
ORA-16825: Fast-Start Failover and other errors or warnings detected for the database
Cause: The broker has detected multiple errors or warnings for the database. At least one of the detected errors or warnings may prevent a Fast-Start Failover from occurring.
Action: Check the StatusReport monitorable property of the database specified.
What does it mean to check the status report.....
I found this about monitorable status report !!
DGMGRL> show database 'M3RPT' 'StatusReport';
STATUS REPORT
INSTANCE_NAME SEVERITY ERROR_TEXT
* WARNING ORA-16821: logical standby database dictionary not yet loaded
DGMGRL>
What can I do ?
Thanks a lot
oldschool
Edited by: oldschool on Jun 4, 2009 2:37 AM

Similar Messages

ORA-16821: logical standby database dictionary not yet loaded

Dear all,
I have a dataguard architecture with a primary and a standby database (for reporting stuffs). Since I upgraded physical standby to logical standby, I receive this error !
ORA-16821: logical standby database dictionary not yet loaded
If someone has an idea, should be great !!
Thanks
oldschool

Hi,
Ok I applied :
SQL> ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Database altered.
SQL> alter database start logical standby apply immediate;
Database altered.
SQL>
And now I received this :
ORA-16825: Fast-Start Failover and other errors or warnings detected for the database
Cause: The broker has detected multiple errors or warnings for the database. At least one of the detected errors or warnings may prevent a Fast-Start Failover from occurring.
Action: Check the StatusReport monitorable property of the database specified.
What does it mean to check the status report.....
I found this about monitorable status report !!
DGMGRL> show database 'M3RPT' 'StatusReport';
STATUS REPORT
INSTANCE_NAME SEVERITY ERROR_TEXT
* WARNING ORA-16821: logical standby database dictionary not yet loaded
DGMGRL>
What can I do ?
Thanks a lot
oldschool
Edited by: oldschool on Jun 4, 2009 2:37 AM

ORA-01403: no data found on LOGICAL STANDBY database

Hi ,
Logical Standby issue :
Oracle 10.2.0.2 enterprise edition .
M Working on LOGICAL Standby since 1 yrs but still i havent got this ......................................
I m getting countinuously no data foud errror on logical standby database .
I found the table causing the proble(db_logstdby_events) and skipped that table and instanciated table using bwlow package:
exec dbms_logstdby.instantiate_table (.......................................
but when i start apply process on logical standby it again give no data found for new table :
Even i tried to instantiate the table using EXPORT/IMPORT during down time but the same facing same problem .
As much as i known abt the error that is :
table1
id
10
20
30
Now if sql apply process on logical standby tries to performe the update transaction(for example) as belows
update table1 set id=100 where id=50;
above query will not be completed cos it will never find the values 50 which is not in table .Thts why this error comming ..
Now my worry is ... no users dare to change/make such changes on Logical standby .So if there is no changes in tables then sqll apply should get all the values to be needded for an update ......
watingggg guyssss/......

Troubleshooting ORA-1403 errors with Flashback Transaction
In the event that the SQL Apply engine errors out with an ORA-1403, it may be possible to utilize flashback transaction on the standby database to reconstruct the missing data. This is reliant upon the undo_retention parameter specified on the standby database instance.
ORA-1403: No Data Found
Under normal circumstances the ORA-1403 error should not be seen in a Logical Standby environment. The error occurs when data in a SQL Apply managed table is modified directly on the standby database, and then the same data is modified on the primary database.
When the modified data is updated on the primary database and received by the SQL Apply engine, the SQL Apply engine verifies the original version of the data is present on the standby database before updating the record. When this verification fails, an ORA-1403: No Data Found error is thrown by Oracle Data Guard: SQL Apply.
The initial error
When the SQL Apply engine verification fails, the error thrown by the SQL Apply engine is reported in the alert log of the logical standby database as well as a record being inserted into the DBA_LOGSTDBY_EVENTS view. The information in the alert log is truncated, while the error is reported in it's entirety in the database view.
LOGSTDBY stmt: update "SCOTT"."MASTER"
set
"NAME" = 'john'
where
"PK" = 1 and
"NAME" = 'andrew' and
ROWID = 'AAAAAAAAEAAAAAPAAA'
LOGSTDBY status: ORA-01403: no data found
LOGSTDBY PID 1006, oracle@staco03 (P004)
LOGSTDBY XID 0x0006.00e.00000417, Thread 1, RBA 0x02dd.00002221.10
The Investigation
The first step is to analyze the historical data of the table that threw the error. This can be achieved using the VERSIONS clause of the SELECT statement.
SQL> select versions_xid
, versions_startscn
, versions_endscn
, versions_operation
, pk
, name
from scott.master
versions between scn minvalue and maxvalue
where pk = 1
order by nvl(versions_startscn,0);
VERSIONS_XID VERSIONS_STARTSCN VERSIONS_ENDSCN V PK NAME
03001900EE070000 3492279 3492290 I 1 andrew
02000D00E4070000 3492290 D 1 andrew
Depending upon the amount of undo retention that the database is configured to retain (undo_retention) and the activity on the table, the information returned might be extensive and the versions between syntax might need to be changed to restrict the amount of information returned.
From the information returned, it can be seen that the record was first inserted at scn 3492279 and then was deleted at scn 3492290 as part of transaction ID 02000D00E4070000. Using the transaction ID, the database should be queried to find the scope of the transaction. This is achieved by querying the flashback_transaction_query view.
SQL> select operation
, undo_sql
from flashback_transaction_query
where xid = hextoraw('02000D00E4070000');
OPERATION UNDO_SQL
DELETE insert into "SCOTT"."MASTER"("PK","NAME") values
('1','andrew');
BEGIN
Note that there is always one row returned representing the start of the transaction. In this transaction, only one row was deleted in the master table. The undo_sql column when executed will restore the original data into the table.
SQL> insert into "SCOTT"."MASTER"("PK","NAME") values ('1','andrew');
SQL> commit;
The SQL Apply engine may now be restarted and the transaction will be applied to the standby database.
SQL> alter database start logical standby apply;

Creating a new schema in a Logical Standby Database

Hi All,
I am experimenting with logical standby databases for the purpose of reporting, and have not been able to create a new schema in the logical standby database - one of the key features of logical standbys.
I have setup primary and logical standby databases, and they seem to be running just fine - changes are moved from the primary to the standby and queries on the standby seem to run ok.
However, If I try to create a new schema on the logical standby, that does not exist on the primary, I get "ORA-01031: insufficient privileges" errors when I try to create new objects.
Show below are the steps I have taken to create the new schema on the logical standby. Any help would be greatly appreciated.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_new
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user new
2 identified by new
3 default tablespace ts_new
4 temporary tablespace temp
5 quota unlimited on ts_new
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to new
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to new
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to new
SYS@UATDR> select * from dba_sys_privs where grantee='NEW'
2 /
GRANTEE PRIVILEGE ADM
NEW CREATE ANY TABLE NO
NEW CREATE TABLE NO
NEW UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect new/new
Connected.
NEW@UATDR>
NEW@UATDR> -- prove ability to create tables
NEW@UATDR> create table new
2 (col1 number not null)
3 tablespace ts_new
4 /
create table new
ERROR at line 1:
ORA-01031: insufficient privileges
NEW@UATDR>
NEW@UATDR>

HI Daniel,
I appreciate your quick response.
My choice of name may not have been ideal, however changing new to another name - like gav - does not solve the problem.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_gav
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user gav
2 identified by gav
3 default tablespace ts_gav
4 temporary tablespace temp
5 quota unlimited on ts_gav
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to gav
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to gav
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to gav
SYS@UATDR> select * from dba_sys_privs where grantee='GAV'
2 /
GRANTEE PRIVILEGE ADM
GAV CREATE TABLE NO
GAV CREATE ANY TABLE NO
GAV UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect gav/gav
Connected.
GAV@UATDR>
GAV@UATDR> -- prove ability to create tables
GAV@UATDR> create table gav
2 (col1 number not null)
3 tablespace ts_gav
4 /
create table gav
ERROR at line 1:
ORA-01031: insufficient privileges
GAV@UATDR>

How to delete the foreign archivelogs in a Logical Standby database

How do I remove the foreign archive logs that are being sent to my logical standby database. I have files in the FRA of ASM going back weeks ago. I thought RMAN would delete them.
I am doing hot backups of the databases to FRA for both databases. Using ASM, FRA, in a Data Guard environment.
I am not backing up anything to tape yet.
The ASM FRA foreign_archivelog directory on the logical standby FRA keeps growing and nothing is get deleted when
I run the following command every day.
delete expired backup;
delete noprompt force obsolete;
Primary database RMAN settings (Not all of them)
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 9 DAYS;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD' CONNECT IDENTIFIER 'WMRTPRD_CWY';
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD2' CONNECT IDENTIFIER 'WMRTPRD2_CWY';
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD3' CONNECT IDENTIFIER 'WMRTPRD3_DG';
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
Logical standby database RMAN setting (not all of them)
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 9 DAYS;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
How do I cleanup/delete the old ASM foreign_archivelog files?

OK, the default is TRUE which is what it is now
from DBA_LOGSTDBY_PARAMETERS
LOG_AUTO_DELETE TRUE SYSTEM YES
I am not talking about deleting the Archive logs files for the Logical database that it is creating, but the Standby archive log files being sent to the Logical Database after they have been applied.
They are in the alert log as follows under RFS LogMiner: Registered logfile
RFS[1]: Selected log 4 for thread 1 sequence 159 dbid -86802306 branch 763744382
Thu Jan 12 15:44:57 2012
*RFS LogMiner: Registered logfile [+FRA/wmrtprd2/foreign_archivelog/wmrtprd/2012_01_12/thread_1_seq_158.322.772386297] to LogM*
iner session id [1]
Thu Jan 12 15:44:58 2012
LOGMINER: Alternate logfile found. Transition to mining archived logfile for session 1 thread 1 sequence 158, +FRA/wmrtprd2/
foreign_archivelog/wmrtprd/2012_01_12/thread_1_seq_158.322.772386297
LOGMINER: End mining logfile for session 1 thread 1 sequence 158, +FRA/wmrtprd2/foreign_archivelog/wmrtprd/2012_01_12/threa
d_1_seq_158.322.772386297
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 159, +DG1/wmrtprd2/onlinelog/group_4.284.771760923

Sql Apply issue in logical standby database--(10.2.0.5.0) x86 platform

Hi Friends,
I am getting the following exception in logical standby database at the time of Sql Apply.
After run the command alter database start logical standby apply sql apply services start but after few second automatically stop and getting following exception.
alter database start logical standby apply
Tue May 17 06:42:00 2011
No optional part
Attempt to start background Logical Standby process
LOGSTDBY Parameter: MAX_SERVERS = 20
LOGSTDBY Parameter: MAX_SGA = 100
LOGSTDBY Parameter: APPLY_SERVERS = 10
LSP0 started with pid=30, OS id=4988
Tue May 17 06:42:00 2011
Completed: alter database start logical standby apply
Tue May 17 06:42:00 2011
LOGSTDBY status: ORA-16111: log mining and apply setting up
Tue May 17 06:42:00 2011
LOGMINER: Parameters summary for session# = 1
LOGMINER: Number of processes = 4, Transaction Chunk Size = 201
LOGMINER: Memory Size = 100M, Checkpoint interval = 500M
Tue May 17 06:42:00 2011
LOGMINER: krvxpsr summary for session# = 1
LOGMINER: StartScn: 0 (0x0000.00000000)
LOGMINER: EndScn: 0 (0x0000.00000000)
LOGMINER: HighConsumedScn: 2660033 (0x0000.002896c1)
LOGMINER: session_flag 0x1
LOGMINER: session# = 1, preparer process P002 started with pid=35 OS id=4244
LOGSTDBY Apply process P014 started with pid=47 OS id=5456
LOGSTDBY Apply process P010 started with pid=43 OS id=6484
LOGMINER: session# = 1, reader process P000 started with pid=33 OS id=4732
Tue May 17 06:42:01 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1417, X:\TANVI\ARCHIVE2\ARC01417_0748170313.001
Tue May 17 06:42:01 2011
LOGMINER: Turning ON Log Auto Delete
Tue May 17 06:42:01 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01417_0748170313.001
Tue May 17 06:42:01 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1418, X:\TANVI\ARCHIVE2\ARC01418_0748170313.001
LOGSTDBY Apply process P008 started with pid=41 OS id=4740
LOGSTDBY Apply process P013 started with pid=46 OS id=7864
LOGSTDBY Apply process P006 started with pid=39 OS id=5500
LOGMINER: session# = 1, builder process P001 started with pid=34 OS id=4796
Tue May 17 06:42:02 2011
LOGMINER: skipped redo. Thread 1, RBA 0x00058a.00000950.0010, nCV 6
LOGMINER: op 4.1 (Control File)
Tue May 17 06:42:02 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01418_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1419, X:\TANVI\ARCHIVE2\ARC01419_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01419_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1420, X:\TANVI\ARCHIVE2\ARC01420_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01420_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1421, X:\TANVI\ARCHIVE2\ARC01421_0748170313.001
LOGSTDBY Analyzer process P004 started with pid=37 OS id=5096
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01421_0748170313.001
LOGSTDBY Apply process P007 started with pid=40 OS id=2760
Tue May 17 06:42:03 2011
Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_p001_4796.trc:
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
LOGSTDBY Apply process P012 started with pid=45 OS id=7152
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1422, X:\TANVI\ARCHIVE2\ARC01422_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01422_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1423, X:\TANVI\ARCHIVE2\ARC01423_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01423_0748170313.001
Tue May 17 06:42:03 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1424, X:\TANVI\ARCHIVE2\ARC01424_0748170313.001
LOGMINER: session# = 1, preparer process P003 started with pid=36 OS id=5468
Tue May 17 06:42:03 2011
LOGMINER: End mining logfile: X:\TANVI\ARCHIVE2\ARC01424_0748170313.001
Tue May 17 06:42:04 2011
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 1425, X:\TANVI\ARCHIVE2\ARC01425_0748170313.001
LOGSTDBY Apply process P011 started with pid=44 OS id=6816
LOGSTDBY Apply process P005 started with pid=38 OS id=5792
LOGSTDBY Apply process P009 started with pid=42 OS id=752
Tue May 17 06:42:05 2011
krvxerpt: Errors detected in process 34, role builder.
Tue May 17 06:42:05 2011
krvxmrs: Leaving by exception: 600
Tue May 17 06:42:05 2011
Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_p001_4796.trc:
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
LOGSTDBY status: ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
Tue May 17 06:42:06 2011
Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_lsp0_4988.trc:
ORA-12801: error signaled in parallel query server P001
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []
Tue May 17 06:42:06 2011
LogMiner process death detected
Tue May 17 06:42:06 2011
logminer process death detected, exiting logical standby
LOGSTDBY Analyzer process P004 pid=37 OS id=5096 stopped
LOGSTDBY Apply process P010 pid=43 OS id=6484 stopped
LOGSTDBY Apply process P008 pid=41 OS id=4740 stopped
LOGSTDBY Apply process P012 pid=45 OS id=7152 stopped
LOGSTDBY Apply process P014 pid=47 OS id=5456 stopped
LOGSTDBY Apply process P005 pid=38 OS id=5792 stopped
LOGSTDBY Apply process P006 pid=39 OS id=5500 stopped
LOGSTDBY Apply process P007 pid=40 OS id=2760 stopped
LOGSTDBY Apply process P011 pid=44 OS id=6816 stopped
Tue May 17 06:42:10 2011

Errors in file x:\oracle\product\10.2.0\admin\tanvi\bdump\tanvi_p001_4796.trc:
ORA-00600: internal error code, arguments: [krvxbpx20], [1], [1418], [2380], [16], [], [], []submit an SR to ORACLE SUPPORT.
refer these too
*ORA-600/ORA-7445 Error Look-up Tool [ID 153788.1]*
*Bug 6022014: ORA-600 [KRVXBPX20] ON LOGICAL STANDBY*

Logical Standby Database and XMLDB

I couldn't find a proper group to post this message and thought I would try here.
I want to set up a Logical Standby Database for our production database server 9.2.0.4.0 with XMLDB. I am having problem with some system tables that were created when I registered some XML schemas.
These tables are in the standby database but Oracle complains the object does not exist.
Any idea?

>
The "may be" is because I have tested flashback of a physical standby to before resetlogs, but not a logical standby.
>
A physical standby keeps the DBID of the primary - a logical standby does not. That is exactly the problem that restricts the reconversion into physical from logical, and you did not encounter that problem.
>
I haven't used "keep identity" but from what I read it relates to "convert to physical" not "flashback database".
>
Exactly. And that is what the OP wants to do: convert to physical (from logical).
You mentioned that this might be possible with flashback.
Problem: During the conversion from physical to logical, the DBID gets changed unless you specify (in 11g) KEEP IDENTITY. This would make it possible to reconvert into phyiscal from logical.
In short: If there is no solution for the changed DBID of the logical standby in order to flashback it into physical as you suggested, then it is not possible .
When I saw your first answer, I thought that you might have a solution in mind in order to solve that obvious problem. Sorry for having bothered you.
Kind regards
Uwe
http://uhesse.wordpress.com

Logical standby database to physical standby database

I already start my logical standby database and I want to return it again to physical standby database. So what should I do?

>
The "may be" is because I have tested flashback of a physical standby to before resetlogs, but not a logical standby.
>
A physical standby keeps the DBID of the primary - a logical standby does not. That is exactly the problem that restricts the reconversion into physical from logical, and you did not encounter that problem.
>
I haven't used "keep identity" but from what I read it relates to "convert to physical" not "flashback database".
>
Exactly. And that is what the OP wants to do: convert to physical (from logical).
You mentioned that this might be possible with flashback.
Problem: During the conversion from physical to logical, the DBID gets changed unless you specify (in 11g) KEEP IDENTITY. This would make it possible to reconvert into phyiscal from logical.
In short: If there is no solution for the changed DBID of the logical standby in order to flashback it into physical as you suggested, then it is not possible .
When I saw your first answer, I thought that you might have a solution in mind in order to solve that obvious problem. Sorry for having bothered you.
Kind regards
Uwe
http://uhesse.wordpress.com

Materialized View Logs in a logical standby database

I am trying to create materialized views based on a few tables in a logical standby database.
The target database (11g R2) where the MVs will be created is a stand-alone database.
The DB where the base tables reside is a logical standby database (11g R2).
The requirement is to do a "FAST REFRESH" of the Materialized Views.
My questions are :
1. Can I create MV logs in the logical standby DB?
2. If the answer to question no. 1 is "Yes", do I need to do anything different or configure the logical standby DB in a specific manner in order to create MV logs. From what I understand, the objects in the logical standby database are in a locked state. Is that going to be a problem ?
Any other information that might be relevant is greatly appreciated.
Thanks in advance.

HI Daniel,
I appreciate your quick response.
My choice of name may not have been ideal, however changing new to another name - like gav - does not solve the problem.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_gav
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user gav
2 identified by gav
3 default tablespace ts_gav
4 temporary tablespace temp
5 quota unlimited on ts_gav
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to gav
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to gav
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to gav
SYS@UATDR> select * from dba_sys_privs where grantee='GAV'
2 /
GRANTEE PRIVILEGE ADM
GAV CREATE TABLE NO
GAV CREATE ANY TABLE NO
GAV UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect gav/gav
Connected.
GAV@UATDR>
GAV@UATDR> -- prove ability to create tables
GAV@UATDR> create table gav
2 (col1 number not null)
3 tablespace ts_gav
4 /
create table gav
ERROR at line 1:
ORA-01031: insufficient privileges
GAV@UATDR>

Creating triggers in a logical standby database

Does anyone know if its possible to create and enable a trigger in a logical standby database on a 'guarded' table? I've been able to create the trigger (as an after insert trigger) and it appears to be valid but it never seems to fire, despite inserts taking place. Are there any other steps involved to activate this, or is it just plain not possible in a logical standby? My primary and logical standby databases are 10.2.0.3

HI Daniel,
I appreciate your quick response.
My choice of name may not have been ideal, however changing new to another name - like gav - does not solve the problem.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_gav
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user gav
2 identified by gav
3 default tablespace ts_gav
4 temporary tablespace temp
5 quota unlimited on ts_gav
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to gav
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to gav
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to gav
SYS@UATDR> select * from dba_sys_privs where grantee='GAV'
2 /
GRANTEE PRIVILEGE ADM
GAV CREATE TABLE NO
GAV CREATE ANY TABLE NO
GAV UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect gav/gav
Connected.
GAV@UATDR>
GAV@UATDR> -- prove ability to create tables
GAV@UATDR> create table gav
2 (col1 number not null)
3 tablespace ts_gav
4 /
create table gav
ERROR at line 1:
ORA-01031: insufficient privileges
GAV@UATDR>

How to apply the changes in logical standby database

Hi,
I am new to Dataguard. I am now using 10.2.0.3 and followed the steps from Oracle Data Guard Concepts and Administration Guide to setup a logical standby database.
When I insert a record to a table from the primary database side, when i query the same table from the logical standby database, it doesn't show the new records.
Did I miss something? What I want to do is when I insert a record in the primary db, then the corresponding record will be inserted in the standby db.
Or I totally misunderstand what Oracle data guard is? Any help are appreciated.
Denis

Hi
Can anyone help to answer me is my logical standby db have a archive gap?
SQL> SELECT APPLIED_SCN, APPLIED_TIME, READ_SCN, READ_TIME, NEWEST_SCN, NEWEST_T
IME FROM DBA_LOGSTDBY_PROGRESS;
APPLIED_SCN APPLIED_TIME READ_SCN READ_TIME NEWEST_SCN
NEWEST_TIME
851821 29-JUL -08 17:58:29 851822 29-JUL -08 17:58:29 1551238
08-AUG -08 08:43:29
SQL> select pid, type, status, high_scn from v$logstdby;
no rows selected
SQL> alter database start logical standby apply;
Database altered.
SQL> select pid, type, status, high_scn from v$logstdby;
PID
TYPE
STATUS HIGH_SCN
2472
COORDINATOR
ORA-16116: no work available
3380
READER
ORA-16127: stalled waiting for additiona 852063
l transactions to be applied
2480
BUILDER
ORA-16116: no work available
2492
ANALYZER
ORA-16111: log mining and apply setting
up
2496
APPLIER
ORA-16116: no work available
2500
APPLIER
ORA-16116: no work available
3700
APPLIER
ORA-16116: no work available
940
APPLIER
ORA-16116: no work available
2504
APPLIER
ORA-16116: no work available
9 rows selected.
Thanks a lot.
Message was edited by:
Denis Chan

Problem while mining archivelog in Logical Standby Database

I have configure Data Guard with one Primary database, one physical standby and one logical standby database; redo are applied correcly on the physical standby database but on the logical standby database when logminer begin mining logfile it encounter this errors :
ORA-00600 internal error code, arguments : [kpotcgah-7],[64],[X4],[],[],[],[],[]
ORA-12801 error signaled in parallel query server P003
ORA-07445
ORA-12805 parallel query server died unexpectedly

Unfortunately ORA-00600 errors are beyond the scope ot this forum, as they require tools and source code available only at Oracle Support. The only directions you most probably will get here is to issue a Service Request. Oracle support will, among other things, ask you if you are at the latest available patch for your platform.
Good luck.

Creating new tables in Logical Standby database

Hi
I have a requirement to create new tables in logical standby database. These tables will not be present on primary database. Is it possible to do this ?
I have a new schema already created which has the privilege to CREATE new table.
I have stopped the logical standby apply.
When I am now trying to create a new table but it is failing with error : insufficient privileges.
When I am trying to run below statement on new schema it is also failing with error of insufficient privileges.
alter session disable dataguard;
Please help.

user8819121 wrote:
Thanks Mahir,
I was able to create the table after logging in as sysdba.
But I need my user on that table to execute DML statements. My user has privileges to insert,delete and update any table.
I tried the following statements to disable the guard but it is sill not working
ALTER DATABASE GUARD STANDBY.
Do I need to skip the tables created using dbms_logstdby package to not making it part of SQL Apply ? I guess not since the table is not in primary database.
Amit
You can skip only on primary, your created schema on Standby is not in primary.
Then you must change Status of data guard to NONE. NONE is means is not any security on your data.
In Guard status NONE can change all schema data.
Please check link: http://docs.oracle.com/cd/E11882_01/server.112/e10700/manage_ls.htm#CHDGFGHG
Following tests on user created before guard status is change from ALL to STANDBY.
C:\Users\Administrator>sqlplus / as sysdba
SQL> conn test/test
Connected.
SQL> select table_name from user_tables;
TABLE_NAME
T
SQL> insert into t values(22);
insert into t values(22)
ERROR at line 1:
ORA-16224: Database Guard is enabled
SQL> conn / as sysdba
Connected.
SQL> select guard_Status from v$database;
GUARD_S
ALL
SQL> alter database guard standby;
Database altered.
SQL> conn test/test
Connected.
SQL> insert into t values(1);
insert into t values(1)
ERROR at line 1:
ORA-16224: Database Guard is enabled
SQL> conn / as sysdba
Connected.
SQL> select guard_Status from v$database;
GUARD_S
STANDBY
SQL> alter database guard none;
Database altered.
SQL> select guard_Status from v$database;
GUARD_S
NONE
SQL> conn test/test
Connected.
SQL> insert into t values(1);
1 row created.
SQL> commit;
Commit complete.And Now I want share with you new tests :)
Now user creating when after guard status change
SQL> drop user test cascade;
User dropped.
SQL> select guard_status from v$database;
GUARD_S
STANDBY
SQL> create user test identified by test;
User created.
SQL> grant create session, resource, create table to test;
Grant succeeded.
SQL> conn test/test
Connected.
SQL> create table t (n number);
Table created.
SQL> insert into t values(1);
1 row created.
SQL> commit;
Commit complete.
SQL>It means when guard status is ALL then all of user created guarding.
When you changed status to STANDBY then Logical Standby guard only primary schema and created schema before change.
NONE is not guard any schema. it means you can delete standby schema data too.
Regards
Mahir M. Quluzade
Edited by: Mahir M. Quluzade on Apr 19, 2013 4:07 PM

Logical standby database issue?

Hi,
I created a logical standby database on the same server as primary database.
then I transited the old primary DB to standby DB,
old standby DB to primary DB.
and "alter system switch logfile" in new Primary DB.
execute sql in new standby DB:
SQL> SELECT APPLIED_SCN, NEWEST_SCN FROM DBA_LOGSTDBY_PROGRESS;
APPLIED_SCN NEWEST_SCN
0
question:
the redo logs can not be applied to new standby DB,
How to solve it?
thanks
DB release:9i

Hi,
Can you upload the output of:
sqlplus> show parameter arc
from both instances, or post the init.ora parameters from both. I would like to verify your arc related parameters.
Also, did you check the alert log in the primary and standby for errors?
Thanks,
Idan.

Steps to rollback when Logical Standby Database creation fails

Hi,
In case while creating a logical standby database it fails. What steps should be done on primary to rollback the earlier steps. Because while creating logical standby we do certain tasks on primary e.g.
1) create supplemental logging.
2) update init file.
Regards,
Tushar

Hi,
Thanks for the mail. Should I drop the supplemental logging using
"Alter database DROP Supplemental Log data;".
or if we need to disable, how can we do so?
Rest is ok. Anyways I would not be using force logging.
Droping of additional tablespace created to keep logminer tables on primary.
Removing of log_archive_dest_2 information from primary init.
I think the above should do.
Regards,
Tushar

Logical standby database keeps displaying ORA-16768

Similar Messages

Maybe you are looking for